Home Automation
Home Automation
INDEX
Residential Grade
Vizia RF +® Home Controls . .............................. 166
Vizia RF + Dimmers . .......................................... 167
Vizia RF + Switches ........................................... 169
Vizia RF + Controllers ........................................ 170
Vizia RF + Plug-In Modules ................................ 173
Vizia RF + Custom Engraved Form .................... 172
Vizia RF + Programming & Handheld Remotes ... 175
Decora® Home Controls .....................................
Decora Controllers – Green Line ........................
Decora Controllers – Red Line ............................
Decora Wall Dimmers & Switches ......................
Decora Receivers – Red Line ..............................
Decora RF Products,
Amplifiers & Noise Filters ..................................
For technical support call 800-824-3005
Online catalog available at leviton.com
176
177
180
181
184
187
165
Home Automation
Residential Grade
Vizia RF +® Home Controls
Join a revolution in the home automation industry with Vizia RF +® wireless lighting and home control technology.
Innovative and affordable, with features that are desired by professional installers and appreciated by homeowners,
Vizia RF + helps reduce energy consumption. It provides dramatic scene transitions, extended zone lighting control,
industry standard 2-way status updating and true integration of household electrical devices. Use Vizia RF + to
enhance new construction or to refresh existing homes and residences.
Equipped with Z-Wave®, the leading home automation technology, Vizia RF + allows tailoring of the perfect home
control solution. Imagine a home in which the lighting automatically adapts to your needs. With Vizia RF +, this dream
can become reality without straining your energy resources or budget.
For example, in the kitchen one button can slowly dim the ceiling light while subtly brightening the chandelier over the
kitchen table. Vizia RF + can control other rooms just as impressively. It also works well with exterior fixtures, enabling
them to be controlled throughout the house.
The Vizia RF + product line includes new customer-requested features that increase its options, such as 49
selectable fade rates, an Energy Save mode, customizable preset maximum and minimum brightness levels, and
more control of locator LED activity.
Matching an automation system to a homeowner’s lifestyle is easy with Vizia RF +, the wireless home control system
preferred by professionals. Vizia RF + is simply brilliant inside and out.
166
For technical support call 800-824-3005
Online catalog available at leviton.com
Home Automation
Residential Grade
Dimmers
Specifications and Features
• Universal design provides crisp actuation and minimal travel
• 49 possible combinations of fade rates, from soft to instant
• Separate fade up and fade down speeds
• Energy Save option reduces power consumption and extends bulb life
• Preset On Level option sets the brightness level when the device is turned on, regardless
of the previous level
• Minimum Brightness Level option sets the minimum brightness level the dimmer will output
prior to turning completely off
• LED Display options control the length of time they remain lit
• Push pad always returns to neutral position regardless of load status
• Compatible with Decora Plus™ screwless wallplates and Decora® wallplates
• Complements Vizia +® Lighting Controls
• Color change kits are available to allow fast color changeover and simplify stocking inventory
• Manual and remote ON/OFF/DIM/BRIGHT control of connected loads
• ON/OFF/DIM/BRIGHT scene and zone control capability
• Responds to Vizia RF + Controllers as well as selected Z-Wave certified controllers from other manufacturers
• Works with the Vizia RF + 1-Zone Controller/Virtual Dimmer Remote (VRCZ1-1L) for RF virtual 3-way control
without the need for traditional 3-way wiring or for a dedicated traveler wire
• Works with Vizia +® (non-RF) Matching and Coordinating Remotes (VP00R) for hardwired 3-way or up to
10-location control
• 2-way status
• Easy to clean, high gloss finish complements a wide range of décors
• DIM/BRIGHT bar allows user to select brightness level when lights are ON or OFF – green LED displays brightness level
• Power-failure memory allows light levels to return to the same levels set prior to a power interruption
• RFI filtering for radio, audio and video equipment
• Air gap switch disconnects power from load locally. It is concealed during normal operation and is accessible
without removing the wallplate
• Limited Five-Year Warranty
Color CHOICES
To order colors, add suffix to Cat No.
White
(-W)
Ivory
(-I)
Almond
(-A)
Lt. Almond
(-T)
For technical support call 800-824-3005
Grey
(-G)
Black
(-E)
Brown
(-B)
Red
(-R)
Online catalog available at leviton.com
167
Home Automation
Residential Grade
Vizia RF +® Scene Capable Dimmers for Single Pole,
3-Way or Multi-Location Applications U S
Dimmers
VR106-1L
Description
Rating
Cat. No.
Color
Incandescent Dimmer with
LED locator and brightness display
Incandescent Dimmer with
LED locator and brightness display
Magnetic Low Voltage Dimmer with
LED locator and brightness display
Electronic Low Voltage Dimmer with
LED locator and brightness display
600W – 120VAC
60Hz
1000W – 120VAC
60Hz
1000VA – 120VAC
60Hz
600W – 120VAC
60Hz
VRI06-1L
X, Z
VRI10-1L
X, Z
VRM10-1L
X, Z
VRE06-1L
X, Z
1.5A – 120VAC
60Hz
VRF01-1L
X, Z
Fan Speed Controls
Quiet Fan Speed Control with
LED locator and fan speed display
Color Change Kit for Vizia RF + Dimmers U S
VRM10-1L
Description
Cat. No.
Color
Matching Dimmer/Fan Speed Control Color Change Kit with LED locator
and brightness display
VPKIT-MD
W, I, A,T, G, E, B, R
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #152105)
• NOM Certified (#057)
• Complies with FCC Part 15, Class B
• Z-Wave Certified
MATERIAL CHARACTERISTICS
Operating Temperature: 0°C to 55°C
Relative Humidity less than 20% to 90%
(non-condensing)
COLOR
Some products come packaged with three
colors. Products with suffix (-X) include White,
Ivory and Almond; products with suffix (-Z)
include White, Ivory and Light Almond. Color
Change kits available in the following colors:
White (-W), Ivory (-I), Almond (-A), Light Almond
(-T), Gray (-G), Black (-E), Brown (-B), and Red (-R)
Related Products
Use Leviton Power Extenders to extend the load capacity of Vizia RF +
dimming wall switch receivers. See page 227 for more information.
168
For technical support call 800-824-3005
Online catalog available at leviton.com
Home Automation
Residential Grade
Switches
Specifications and Features
• Push pad always returns to neutral regardless of load status
• Compatible with Decora Plus™ screwless wallplates and Decora wallplates
• Vizia RF +® style push pad blends seamlessly with other devices in the Vizia +® collection
• Manual and remote ON/OFF control of connected loads
• ON/OFF scene and zone control compatibility
• LED Display options control the length of time they remain lit
• Universal design provides crisp actuation and minimal travel
• Responds to Vizia RF + Controllers as well as selected Z-Wave certified controllers from other manufacturers
• Works with the Vizia RF + 1-Scene Controller/Virtual Switch Remote (VRCS1-1L) for wireless RF virtual 3-way
control without the need for traditional 3-way wiring or for a dedicated traveler wire
• Works with Vizia + (non-RF) Matching and Coordinating Remote (VP0SR-10) for hardwired 3-way or up to
10-location control
• 2-way status
• Pro Level integration with selected products and brands
• UL required air gap switch disconnects power from load locally. It is concealed during normal operation and is
accessible without removing the wallplate
• Color change kits are available to allow fast color changeover and simplify stocking inventory
• Limited Five-Year Warranty
Vizia RF + Scene Capable Switch for Single Pole,
3-Way or Multi-Location Applications U S
Description
Rating
Cat. No.
Color
Scene Capable Switch with LED locator Incandescent Scene Capable Switch with LED locator 15A
1800W Resistive
1800W Incandescent
1800VA Fluorescent
1800VA Inductive
1/2 HP Motor (9.8A)
5A
Incandescent only
(no neutral required)
VRS15-1L
X, Z
VRS05-1L
X, Z
VRS15-1L
Color Change Kit for Vizia RF Switch U S
Description
Cat. No.
Color
Matching Switch Color Change Kit with LED locator
VPKIT-MS
W, I, A, T, G, E, B, R
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #152105)
• NOM Certified (#057)
• Complies with FCC Part 15, Class B
• Z-Wave Certified
MATERIAL CHARACTERISTICS
Operating Temperature: 0°C to 55°C
Relative Humidity less than 20% to 90%
(non-condensing)
For technical support call 800-824-3005
COLOR
Some products come packaged with three
colors. Products with suffix (-X) include White,
Ivory and Almond; products with suffix (-Z)
include White, Ivory and Light Almond. Color
Change kits available in the following colors:
White (-W), Ivory (-I), Almond (-A), Light Almond
(-T), Gray (-G), Black (-E), Brown (-B), and Red (-R)
Online catalog available at leviton.com
169
Home Automation
Residential Grade
Controllers
Specifications and Features
• Easy to clean, high gloss finish complements a wide range of décors
• Controller fits in standard wall box and utilizes existing 120VAC 60Hz wiring to replace a regular switch
(when neutral wire is present) for easy “no-new-wires” installation
• 2-way status updates
• Compatible with Decora Plus™ screwless wallplates and Decora wallplates
• Popular Vizia + style push pad blends seamlessly with other devices in the Vizia + collection
• Custom Engraving available on VR6C52, VRC54 and VRCZ4
• Limited Five-Year Warranty
Vizia RF +® 1-Button Scene Controller/Virtual Switch Remote (VRCS1)
• Consistent form factor, excellent ergonomic traits and appealing tactile touch and feel
• Provides remote ON/OFF control of one scene
• Virtual 3-way and multi-location remote ON/OFF control of selected Vizia RF + switches without the need for
traditional 3-way wiring or a dedicated traveler wire
• Green LED illuminates to indicate controlled scene. When acting as a virtual remote, LED will illuminate when
the load is OFF
• LED Display options control the length of time they remain lit
Vizia RF + 1-Button Zone Dimming Controller (VRCZ1)
• Provides remote ON/OFF/DIM/BRIGHT control of one Vizia RF + Dimmer
• Virtual 3-way remote dimming control of selected Vizia RF + dimmers without the need for traditional
3-way wiring or a dedicated traveler wire
• DIM/BRIGHT bar allows user to select brightness level when lights are ON or OFF – green LED displays
brightness level
• Green LED locator illuminates to indicate controlled zone or load is OFF
• LED Display options control the length of time they remain lit
Vizia RF + 4-Button Scene Controller (VRCS4)
• Provides remote ON/OFF/DIM/BRIGHT control of four scenes of selected Vizia RF + devices
• Integrated infrared (IR) port
• Green LED illuminates when the assigned scene is ACTIVE
Vizia RF + 4-Button Zone Controller (VRCZ4)
• Provides remote ON/OFF/DIM/BRIGHT control of four zones/areas of selected Vizia RF + devices
• Integrated infrared (IR) port
• Green LED illuminates when assigned zone/area is ACTIVE
Combination Controllers
• Perfect for retrofit applications — local control of load and scene or zone capability
• Controller fits in standard wallbox and utilizes 120VAC-240VAC, 50/60Hz wiring
• Local and remote control of two loads in one wallbox (VRCS2)
• Button label kits available for VRCZ4-MR and VRCS4-MR
170
For technical support call 800-824-3005
Online catalog available at leviton.com
Home Automation
Residential Grade
Vizia RF + Wall Controllers U S
Description
Rating
Cat. No.
Color
1-Button Scene Controller/ Virtual Switch Remote
Vizia RF + 1-Button Zone Controller/ Virtual Dimmer Remote
Vizia RF + 4-Button Scene Controller
Vizia RF + 4-Button Zone Controller
No Load Rating
120VAC-60Hz
No Load Rating
120VAC-60Hz
No Load Rating
120VAC-60Hz
No Load Rating
120VAC-60Hz
VRCS1-1L
X, Z
VRCZ1-1L
X, Z
VRCS4-1L
X, Z
VRCZ4-1L
X, Z
Vizia RF + COMBINATION Controllers U S
Description
Rating
Cat. No.
Color
4-Button Zone Controller with Switch and IR Remote Capability
4-Button Scene Controller with Switch and IR Remote Capability
2-Button Scene Controller with Switches with LEDs
1800W/1800VA
1/2 HP 120-240VAC
50/60 Hz
1800W/1800VA
1/2 HP 120-240VAC
50/60 Hz
1000W/1000VA
1/4 HP (per switch)
120-240VAC 50/60 Hz
VRCZ4-MR
X, Z
VRCS4-MR
X, Z
VRCS2-MR
X, Z
VRCZ4-MR
Color Change Kits for Vizia RF Controllers U S
Description
Cat. No.
Color
1-Button Zone Controller/Virtual Dimmer Remote
Color Change Kit with LED locator
and brightness display for VRCZ1
1-Button Scene Controller/Virtual Switch Remote
Color Change Kit with LED locator for VRCS1
4-Button Scene Controller Color Change Kit
with LED locator for VRCS4
4-Button Zone Controller Color Change Kit
with LED for VRCZ4
4-Button Scene Controller Label Kit with LED
locator for VRCS4
4-Button Zone Controller Label Kit with LED for VRCZ4
2-Button Scene Controller with Switches
Color Change Kit with LED for VRCS2
VPKIT-MD
W, I, A, T, G, E, B, R
VPKIT-MS
W, I, A, T, G, E, B, R
VPKIT-S4
W, I, A, T, G, E, B, R
VPKIT-Z4
W, I, A, T, G, E, B, R
VPSLB-S4
W, I, A, T, G, E, B, R
VPZLB-Z4
W, I, A, T, G, E, B, R
VRKIT-DS
W, I, A, T, G, E, B, R
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #152105)
• NOM Certified (#057)
• Complies with FCC Part 15, Class B
• Z-Wave Certified
MATERIAL CHARACTERISTICS
Operating Temperature: 0°C to 55°C
Relative Humidity less than 20% to 90%
(non-condensing)
For technical support call 800-824-3005
VRCS4-MR
COLOR
Some products come packaged with three
colors. Products with suffix (-X) include White, Ivory and
Almond; products with suffix (-Z) include White, Ivory and Light
Almond. Color Change kits available in the following colors:
White (-W), Ivory (-I), Almond (-A), Light Almond (-T), Gray (-G),
Black (-E), Brown (-B), and Red (-R)
Online catalog available at leviton.com
171
Home Automation
Residential Grade
Custom Engraved Button Order Form
To order Vizia RF + Custom Engraved Buttons, please complete order form and submit to a
Leviton distributor for order processing.
Please check one category:
Installer
Homeowner
Distributor
Bill To:
Ship To:
Same as Billing Address
Name: ________________________________________
Name: __________________________________________________
Company: _____________________________________
Company: _______________________________________________
Customer Account Number: _____________________
Address: ________________________________________________
Address: ______________________________________
City, State, Zip: __________________________________________
City, State, Zip: _________________________________
Color:
White
Ivory
Light Almond
Gray
Black
Brown
Red
Button Configuration:
or
4-Button Scene (VPKIT-0S4)
or
4-Button Zone (VPKIT-0Z4)
2-Button Scene (VRKIT-0DS)
Maximum of 10 characters including spaces
Engraving Options:
1
Initial Caps
2
ALL UPPER CASE
3
all lower case
4
Terms:
Send completed forms to:
Please verify that the form is filled out completely and correctly
before submitting. Leviton is not responsible for incomplete
or misspelled words. Custom engraved buttons cannot be returned.
Email to [email protected] or
Fax to 1-800-832-9538
Copy form if additional custom engraved controller buttons
are needed.
Vizia RF + is a registered trademark of Leviton Manufacturing Co., Inc.
Form must be submitted by a Leviton Distributor
© 2010 Leviton Manufacturing Co., Inc. All rights reserved.
Please allow 4-6 weeks for processing and delivery.
172
Subject to change without notice. G-8258/L09-tp
For technical support call 800-824-3005
Online catalog available at leviton.com
Home Automation
Residential Grade
Plug-In Modules
Specifications and Features
• Green Locator LED
• Limited Five-Year Warranty
Vizia RF +® Scene Capable Plug-in Appliance Module (VRP15)
• Provides 15A-120VAC NEMA 5-15R grounding receptacle for use with a wide variety of lamps and appliances
• Provides manual ON/OFF switching of plug-in load and remote scene and zone control compatibility
• 2-way status
• Protected memory maintains ON/OFF status of loads and during minor power fluctuations
Vizia RF + Scene Capable Plug-in Lamp Dimming Module (VRP03)
• Provides NEMA polarized 1-15R 2-blade receptacle for use with incandescent lamps
• Load Sensing feature allows lamp to be turned ON manually using the lamp’s switch or the integrated ON/OFF button
• Provides manual and remote ON/OFF/ DIM/BRIGHT control of plug-in lamps
• 2-way status
• Provides ON/OFF/DIM/BRIGHT scene and zone control capability
• Protected memory maintains ON/OFF/Brightness level status of connected loads and device ID programming
during minor power fluctuations
Vizia RF + Plug-In Serial Interface Module, ASCII to Z-Wave Interface (VRC0P)
• Provides RJ11 connector for RS232 or selected HAI® component connection
• Two-way communication between related Controller(s) and Module
• Protected memory and device ID programming during minor power fluctuations
• Transient surge protection to IEC Level 4
• ESD protection to IEC 1000 4-2 Level 4 to protect against damage and memory loss due to static discharges
• Includes serial cable
• Z-Wave® compatible
Vizia RF+ Scene Capable Receptacle
• LED display option allows the green LED to be turned OFF
• Load sensing option allows a lamp or other device plugged into the controlled side to be turned ON manually
using the lamp’s integrated ON/OFF button
• Controlled side can be used for wireless ON/OFF control of plugged-in electrical loads, such as lamps, appliances
and electronics
• Non-controlled side is a tamper-resistant receptacle that provides constant power
• TR symbol on receptacle strap assures that it meets the 2008 NEC® code requirement
• Split Duplex tamper resistent receptacle
For technical support call 800-824-3005
Online catalog available at leviton.com
173
Home Automation
Residential Grade
Vizia RF +® Scene Capable Plug-In Modules U S
VRP15-1L
Description
Rating
Cat. No.
Color
Vizia RF + Scene Capable
Plug-In Appliance Module
Vizia RF + Scene Capable
Plug-In Lamp Dimming Module
Vizia RF + Plug-In Serial Interface
Module, ASCII to Z-Wave Interface
Vizia RF + Split Duplex TR Receptacle with LED Locator
15A
1800W Incandescent, 1800VA Fluorescent,
1800W Resistive, 1800VA Inductive and
1/2 HP motor loads @ 120VAC-60Hz
300W Incandescent
@ 120VAC-60Hz
No Load Rating
120VAC-60Hz
1800W, 1800VA, 1/2 HP motor loads @: 120VAC- 60Hz
VRP15-1L
W
VRP03-1L
W
VRC0P-1L
W
VRR15-1L
Z
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #152105)
• NOM Certified (#057)
• Complies with FCC Part 15, Class B
• Z-Wave Certified
MATERIAL CHARACTERISTICS
Receptacle: Operating Temperature: 0ºC to 55ºC
COLOR
White (-W). Some products come packaged
with three colors. Products with suffix (-Z) clude
White, Ivory and Light Almond
HAZ is a registered trademark of Home Automation, Inc.
VRP03-1L
174
For technical support call 800-824-3005
Online catalog available at leviton.com
Home Automation
Residential Grade
Programming and Handheld Remotes
Specifications and Features
Remote Controller/Programmer (VRCPG)
• Primary device for creating and programming a Vizia RF + system
• Provides user-level control of up to 128 devices
• Creates up to 128 areas
• Customizes up to 16 profiles
• Creates up to 255 scenes
• Integrated step-by-step setup guide
• Can operate as a secondary remote control
• Creates scheduled events including dusk and dawn (timer version VRCPG-0SG only)
• Provides remote control (ON/OFF/DIM/BRIGHT/SCENE/ZONE) of devices in the Vizia RF + network
IR Remote Controller (VRMR1)
• Works with Vizia RF + IR compatible controllers
• Controls four scenes and four zones
ThinkEssentials® Pro Edition Software by ControlThink® (CTTEP-20W)
• Self-tuning optimization for premium Z-Wave performance
• Professional Z-Wave system programming
• Superior integration with Vizia RF + products
• Install, optimize, integrate and maintain a high performance Z-Wave network
• Patent pending disaster recovery for many Z-Wave system repairs
• Installer software requires Windows XP® or Vista® (32-bit and 64-bit)
Vizia RF + Programming and Handheld
Remote Controllers U S
Description
Cat. No.
RF Handheld Remote Controller, Programmer (Basic)
RF Handheld Remote Controller Programmer/Timer (Internal astronomical clock)
Vizia RF + IR Handheld Remote Controller
ThinkEssentials® Professional Edition for installers
VRCPG-BSG
VRCPG-0SG
VRMR1-0SG
CTTEP-20W
TESTING AND CODE COMPLIANCE
• Complies with FCC Part 15, Class B
• Z-Wave Certified
VRCPG-SG
Windows XP® and Windows Vista® are registered trademarks of the Microsoft Corporation, Inc.
ThinkEssentials is a registered trademark of ControlThink® Inc.
For technical support call 800-824-3005
Online catalog available at leviton.com
175
Home Automation
Residential Grade
Decora® Home Controls
How often does home control require a simple solution? Not the complexity of a whole house integration, rather the
ability to simply control a light from across a room, or turn on a fan in another room. DHC is the ideal solution for such a
task. There are wireless solutions that are well suited for whole house integrations, but the traditional power line protocol
is still an ideal solution for many common household tasks. And it peacefully coexists with modern wireless home control
technologies. DHC is extraordinarily flexible. By remote or keypad, it allows you to turn lights and appliances on and off,
dim lights or make them brighter, or create a mood by commanding certain lights to work together. DHC incorporates X10
Power Line Carrier (PLC) technology. And DHC is equipped with Intellisense™ circuitry to overcome some of the more
common interference problems in other X10 based systems. This exclusive Leviton innovation allows DHC Receivers to
ignore most of the noise that is on your power line to maintain the integrity of your commands.
In performance, in appearance, in installation, DHC is a truly elegant solution.
Intellisense™ is a trademark of Leviton Manufacturing Co., Inc.
176
For technical support call 800-824-3005
Online catalog available at leviton.com
Home Automation
Residential Grade
DHC Controllers — Green Line
Specifications and Features
Toscana™ Deluxe Programmer
• Central access station for manual control of the system
• No programming experience required – use simple wizards for setup
• Automatically turns appliances ON/OFF and lights ON/OFF/DIM/BRIGHT
• Controls up to 256 devices in a DHC home system
• Leviton’s patented Intellisense technology reduces signal problems due to line noise
• 2-way communication capability registers status changes when receivers with 2-way communications
are manually changed
• Permits input of real device names to specify control (such as “wall sconce”) rather than cryptic house and
device codes (e.g. B5)
• Automatically turns lights ON/OFF at dusk and/or at dawn (astronomical clock)
• Allows creation of up to 64 timed events that can reoccur annually
• Creates and downloads complex timed events and macros using a PC with RS-232 port
• Backs up and restores all system data; allows cloning of devices using a PC with RS-232 port
• Mounts in standard 4-gang box
• No external wall transformer or power line interface required
• Creates up to 64 lighting scenes to create lighting moods
• Accesses any of the 64 scenes from the Toscana front panel (eight at any single time)
• Accesses any of the scenes remotely with the HXC7S-1TW scene keypads
• Accesses any of the scenes using ten learned infrared codes
• Learned infrared codes can be taught using any standard IR remote
Wall Switch Controllers
• Fits in standard wallboxes and replaces regular switches to provide DHC control capability as indicated
in “Description”
• Power line based 2-way communication allows status of receivers changed manually to be reflected
in the controller
• Leviton’s patented Intellisense technology virtually eliminates signal problems due to line noise
• Uses existing 120VAC 60Hz wiring to send command signals
• Compatible with Decora Plus™ screwless wallplates and Decora wallplates
• Green LED illuminates to confirm ON command sent or STATUS ON report received
• Streamlined, popular Decora styling complements interiors and is compatible with other Decora devices
• Limited Two-Year Warranty
RF Components
• Ultra-compact key chain remote adds to home security by allowing users to turn lighting ON as they
approach entranceway, garage or driveway
• Plug-in transceiver features Intellisense technology for optimum reliability, power line based 2-way signaling
capability and easy one button programming. Must be used with universal remote and key chain remote
• Limited Two-Year Warranty
Toscana™ is a trademark of Leviton Manufacturing Co., Inc.
For technical support call 800-824-3005
Online catalog available at leviton.com
177
Home Automation
Residential Grade
Toscana™ Deluxe Programmer
HCCPG-1TW
Toscana is a simple central access station that expands DHC control capability with easy
one touch access for up to 64 lighting scenes along with direct remote control of up to
256 devices. Scenes can be accessed by an IR remote or from remote scene lighting
control keypads. Toscana provides complex date/time and macro automated programming
of lights and appliances. Timed events (up to eight groups) can be selected and run on
a recurring basis using a highly accurate internal astronomical clock. Toscana registers
status changes when DHC receivers with 2-way communication are manually changed.
Toscana™ Deluxe Programmer U S
Description
Rating
Cat. No.
Toscana Deluxe Programmer – white frame and white cover; neutral required
No Load Rating
120VAC 60Hz
HCCPG-1TW
Color Change Kits
HXC10-1TW
Description
Cat. No.
Smoke Cover/White Frame
DCKPG-0SW
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• NOM Certified (#057)
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 0ºC to 55ºC
COLOR
Shipped with white frame and white cover
See chart for color change kits
Wall Switch Controllers with 2-Way Communication U S
HXC1D-1TW
Description
Cat. No.
1-Address ON/OFF Controller – One ON/OFF rocker transmits ON/OFF
commands to one address
ALL LIGHTS ON/ALL OFF Controller – One ALL LIGHTS ON/ALL OFF rocker transmits commands to all receivers set to the same letter code as this controller. Provides
“Panic Button” lighting control for safety and security.
HXC10-1TW
NOTE: Receptacle receivers and 6337 Universal Low Voltage Module do not respond
to ALL ON command. ­
1-Address Dimming Controller – One ON/OFF rocker transmits ON/OFF commands
to one address in the same letter code as this controller. Built-in arrow-shaped rocker
transmits DIM/BRIGHT commands to that same address.
2-Address Dimming Controller – Two sets of ON/OFF buttons transmit ON/OFF commands
to two sequential addresses in the same letter code as this controller. One set of DIM/BRIGHT
buttons transmits DIM/BRIGHT commands to the most recently selected address.
3-Address Dimming Controller – Three sets of ON/OFF buttons transmit ON/OFF commands to three sequential addresses
in the same letter code group established on this controller. One set of DIM/BRIGHT
buttons transmits DIM/BRIGHT commands to the most recently selected address.
HXC1A-1TW
HXC1D-1TW
HXC2D-1TW
HXC3D-1TW
HXC2D-1TW
178
For technical support call 800-824-3005
Online catalog available at leviton.com
Home Automation
Residential Grade
Description
Cat. No.
4-Address Dimming Controller – Four sets of ON/OFF buttons transmit ON/OFF commands to four sequential addresses in the same letter code group as
this controller. One set of DIM/BRIGHT buttons transmits DIM/BRIGHT commands
to the most recently selected address.
3-Address Dimming, ALL LIGHTS ON/ALL OFF Controller – Three sets of ON/OFF buttons transmit ON/OFF commands to three sequential addresses
in the same letter code group as this controller. One set of DIM/BRIGHT buttons
transmits DIM/BRIGHT commands to the most recently selected address.
One set of ALL LIGHTS ON/ALL OFF buttons transmits commands to all receivers
set to the same letter code as this transmitter.
Note: Receptacle receivers and 6337 Universal Low Voltage Module will not
respond to ALL ON command. ­­
7-Scene Dimming Controller – Each of 7 SCENE buttons transmits ON commands at preset levels to 12 sequential addresses in the same letter code as this controller.
Note: 12-address sequence continues at address 1 if address 16 is reached before all
sequential addresses are completed. May be used with all Leviton scene capable receivers.
One set of SCENE BRIGHT/SCENE DIM buttons transmits SCENE DIM/BRIGHT commands
to most recently selected scene. One OFF button transmits OFF command to most recently
selected scene. Green LEDs illuminate to indicate ON command sent or SCENE ON command
detected. Green LED illuminates to indicate OFF command sent.
Note: The HXC7S-1TW utilizes extended code format. This command structure is compatible
with HCA02-10E DHC System Amplifier/Coupler/Repeater but is not compatible with the older
version of the System Amplifier (6201).
HXC4D-1TW
HXC4A-1TW
HXC7S-1TW
HXC3D-1TW
No more than four controllers should be installed on a single branch circuit.
Color Change Kits U S
Controller
White
Ivory
Almond
Gray
Black
HXC10-1TW,
HXC1A-1TW
HXC1D-1TW
HXC2D-1TW
HXC3D-1TW
HXC4A-1TW
HXC4D-1TW
HXC7S-1TW
DRK0S-0LW
DRK0S-0LI
DRK0S-0LA
DRK0S-0LG
DRK0S-0LE
DRK1D-00W
DCK2D-0CW*
—
DCK4A-00W
DCK4A-0CW*
DCK4D-00W
DCK4D-0CW*
DCKS7-00W
DCKS7-0CW*
DRK1D-00I
DCK2D-00I*
DCK3D-00I
DCK4A-00I
DCK4A-0CI*
DCK4D-00I
DCK4D-0CI*
DCKS7-00I
DCKS7-0CI*
DRK1D-00A
—
DCK3D-00A
DCK4A-00A
—
DCK4D-00A
DCK4D-0CA*
DCKS7-00A
DCKS7-0CA*
—
—
—
—
—
—
—
DCKS7-00G
DCKS7-0CG*
—
—
—
—
—
—
—
DCKS7-00E
DCKS7-0CE*
HXC4A-1TW
*With printable labels.
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• NOM Certified
For technical support call 800-824-3005
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: ­­­­0ºC to 55ºC
COLOR
All devices are shipped in white only.
See chart for compatible color change kits
Online catalog available at leviton.com
HXC7S-1TW
179
Home Automation
Residential Grade
RF Components
HCPRF-1TW
Description
Cat. No.
HCCKR Plug-In Transceiver – Accepts RF (radio frequency) DHC commands from the
ON/OFF commands. Plugs into any standard receptacle and provides a built-in outlet
for ON/OFF switching of incandescent lamps rated 300W max. @ 120VAC. Two-way
communication permits local status of attached lamp to show on all 2-way capable
DHC controllers. Unit will re-transmit commands for up to 256 DHC addresses. Color: White
Key Chain Remote Controller – Designed to fit on a key chain and send RF (radio frequency) command signals to HCPRF DHC Plug-In Transceiver. With an operating range of up to 50 ft.
through walls and ceilings, it sends ON/OFF commands for any two sequential DHC
addresses (addresses are user programmable). Ideal for control of home lighting from a
vehicle when entering garage or driveway. Uses long-life 3V CR2032 lithium battery
(included). Must be used with HCPRF Transceiver. Color: Black
HCPRF-1TW
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-69519)
• NOM Certified (#057)
• Complies with FCC Part 15, Class B
Note: HCCUR is CSA Certified only.
HCPRF - 1TW is UL Listed, CSA Certified and
HCCKR-E
NOM Certified. UL and CSA not required
for 1HCCKR-E
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 0ºC to 55ºC
HCCKR-E
DHC Controllers — Red Line
Specifications and Features
• Programmer adds user devised scheduling to DHC automated control of lights and appliances for greater
convenience, energy savings and security
• Programmer and controllers send DHC switching commands over existing 60Hz 120VAC house wiring
• Limited Two-Year Warranty
Programmer/Controller Products U S
Description
Cat. No.
Table Top Controller** – Provides manual remote control for all 256 DHC addresses.
Command functions include ON/OFF, ALL LIGHTS ON/ALL OFF and DIM/BRIGHT. The 6320
plugs into any 120VAC receptacle to transmit command signals over existing AC wiring.
6320
Power to control side: 125V 60Hz AC Only U S
LV Lead Color
6320
Transmits To
Brown A4*
Blue A1*
Orange A2*
Yellow A3*
*Of any four sequential address codes within the same letter code group as the transmitter. CSA Certified except where indicated by **.
No more than four controllers should be installed on a single branch circuit.
NOTE: An HCA02-10E System Amplifier must be installed in all panels in every DHC installation to ensure adequate signal strength.
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• NOM Certified (#057)
180
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: ­­­­0ºC to 55ºC
For technical support call 800-824-3005
Online catalog available at leviton.com
Home Automation
Residential Grade
DHC Receivers — Green Line
Scene Capable Wall Dimmers and Switches
Dimming wall switch receivers provide manual and remote ON/OFF switching and full range dimming for incandescent
and magnetic low voltage loads. All feature Leviton’s exclusive Intellisense technology to ensure top performance
and reliability, even when noise is present on the AC power line. The preset feature turns lights ON at the last selected
brightness level. And the soft ON/fade OFF feature provides an eye-pleasing effect and extended bulb life. Receivers
are scene capable when used with HCCPG-1TW Toscana Programmer and HXC7S 7-Scene Controller and will respond
to ON, OFF, DIM, BRIGHT, ALL LIGHTS ON/ALL OFF and SCENE commands.
Scene Capable Wall Dimmers (with LED Locator)
These scene capable receivers also provide 1-button programming for scene and address capturing and feature an
LED brightness level display. Double Tap feature immediately adjusts light to full brightness without affecting the last
selected brightness level. The HXS08-1TW Electronic Switch Receiver (2-way non-dimming) provides manual and
remote ON/OFF switching for incandescent, magnetic low voltage, fluorescent and compact fluorescent lighting. Plus
all 2-way receivers allow power line based 2-way status tracking with the DHC Toscana Deluxe Programmer and new
2-way capable controllers when receivers are changed locally.
Specifications and Features
Wall Dimmers and Switches
• 1-button programming
• Provides scene control capability when used with HXC7S-1TW DHC Scene Controller and HCCPG-1TW Toscana
Programmer. Also backward compatible with 16400/16450-S and 16400/16450-SD Scene Controllers
• Soft ON/fade OFF brightness levels extend bulb life
• LED locator and brightness display alongside rocker (LED models only)
• Fits in standard wall boxes
• Leviton’s patented Intellisense technology virtually eliminates signal problems due to line noise
• Protected memory during minor power fluctuations
• Packed with ivory and white snap-on rocker/frame kit; optional snap-on rocker/frame color change kits
sold separately. See color change kit chart
• Streamlined, popular Decora styling complements interiors and is compatible with other Decora devices
• Limited Two-Year Warranty
Modules
• Plug-in design requires no wiring
• HXP15-1TW provides manual and remote ON/OFF switching of plug-in lamps and appliances
• HCP03-10W provides manual and remote ON/OFF switching and full-range dimming for plug-in incandescent lamps
• 1-button programming through address capturing
• Scene capable when used with HXC7S-1TW 7-Scene Controller and HCCPG-1TW Toscana Deluxe Programmer
• Protected memory maintains status of plug-in loads and address programming during minor power fluctuations
• HXP15-1TW provides status tracking to notify power line based 2-way capable controllers of manual status changes
• Leviton’s patented Intellisense technology virtually eliminates signal problems due to line noise
• Limited Two-Year Warranty
For technical support call 800-824-3005
Online catalog available at leviton.com
181
Home Automation
Residential Grade
Scene Capable Wall Dimmers and Switches U S
HCM06-1D
Description
Rating
Cat. No.
Color
Dimming Wall Switch Receiver with
1-button programming, LED locator
and LED brightness display; 3-way capable
when used with MS00R-10 Remote
Dimming Wall Switch Receiver with
1-button programming, LED locator
and LED brightness display; 3-way capable
when used with MS00R-10 Remote
10 Amp Switch (non-dimming) with LED locator – Single pole and 3-way (multi-location) when
used with MS00R-10 Remote; neutral required;
requires 6287 when used with electronic
loads such as compact fluorescent lamps
8 Amp Electronic Switch Receiver (non-dimming) with LED locator, 1-button
programming and 2-way
communication; neutral required
Dimming Switch – Single pole and 3-way
(multi-location) when used with
MS00R-10 Remote, no LEDs; no neutral required
for incandescent loads
Dimming Switch – Single pole and 3-way
(multi-location) when used with
MS00R-10 Remote, no LEDs; no neutral
required for incandescent loads
Incandescent: 600W Magnetic Low Voltage:
600VA (450W)
120VAC 60Hz
Incandescent: 1000W Magnetic Low Voltage:
1000VA (750W)
120VAC 60Hz
Incandescent: 1200W Fluorescent and Magnetic
Low Voltage: 1200VA
10A-120VAC 60Hz
HCM06-1D
W
HCM10-1D
W
HCS10-1S
W
8A
Incandescent: 1000W
Fluorescent and
Magnetic Low Voltage:
1000VA (750W)
Incandescent: 600W Magnetic Low Voltage:
600VA (450W)
120VAC 60Hz
Incandescent: 1000W Magnetic Low Voltage:
1000VA (750W)
120VAC 60Hz
HXS08-1T
W
HCM06-1S
W
HCM10-1S
W
HCM06-1S
Related Products
Use Leviton Power Extenders to extend the load capacity of DHC dimming wall
switch receivers. See page 227 for more information.
182
For technical support call 800-824-3005
Online catalog available at leviton.com
Home Automation
Residential Grade
Color Change Kits for Wall Dimmers and Switches U S
Rocker and Frame
Receiver
White
Ivory
Almond
Gray
Black
HCM06/10-1D
HXM06/10-1T HXS08-1T HCS10-1S HCM06/10-1S
DRKDD-1LW
DRKDD-1LW
—
DRK0S-0LW
—
DRKDD-1LI
DRKDD-1LI
DRK0D-1LI
DRK0S-0LI
DRK0D-1LI
DRKDD-1LA
DRKDD-1LA
DRK0D-1LA
DRK0S-0LA
DRK0D-1LA
DRKDD-1LG
DRKDD-1LG
DRK0D-1LG
DRK0S-0LG
DRK0D-1LG
DRKDD-1LE
DRKDD-1LE
DRK0D-1LE
DRK0S-0LE
DRK0D-1LE
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 0°C to 55ºC
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• NOM Certified (#057)
• UL 1472 Listed
COLOR
Colors available as listed. See chart for rocker and frame kits
(available separately). Ivory kit included
Scene Capable Plug-In Receiver Modules U S
Description
Rating
Cat. No.
Plug-In Appliance Module with 1-Button Programming
and 2-Way Communication – It responds to ON, OFF,
ALL LIGHTS ON/ALL OFF and SCENE COMMANDS, and its push button
allows manual ON/OFF control. A status tracking feature notifies 2-way
capable controllers of manual status changes, and Intellisense
technology delivers the utmost in reliability, even with constant noise
on the AC power line. With LED locator light.
Plug-In Lamp Module with 1-Button Programming – HCP03 is also
backward compatible with 16400/16450-S and 16400/16450-SD DHC
Scene Controllers. The HCP03 responds to ON, OFF, DIM, BRIGHT,
ALL LIGHTS ON/ALL OFF and SCENE LIGHTING commands, and it features
“load sensing”, which allows a lamp to be turned ON manually using the
lamp’s own switch or the ON/OFF button on the module.
120VAC 60Hz
HXP15-1TW
120VAC 60Hz
HCP03-10W
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• NOM Certified (#057)
HXP15-1TW
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 0°C to 55ºC
HCP03-10W
For technical support call 800-824-3005
Online catalog available at leviton.com
183
Home Automation
Residential Grade
DHC Receivers — Red Line
Specifications and Features
Wall Switch Receivers
• Fits in standard wall boxes and replaces regular switches to provide manual and remote ON/OFF switching
of lighting and appliances. 6381-WI dimming switch rated for incandescent lighting only
• Leviton’s patented Intellisense technology virtually eliminates signal problems due to line noise
• Uses existing 60Hz 120VAC house wiring to add multi-location switching without resorting to complicated
and costly conventional wiring means
• Streamlined, popular Decora styling complements interiors and is compatible with other Decora devices
• Limited Two-Year Warranty
Wall Switch Remotes and Receivers
• Remote units provide multi-location capability to dimmer and switch receivers
• Fits in standard wall boxes to replace regular switches
• Leviton’s patented Intellisense technology virtually eliminates signal problems due to line noise
• 6371 heavy duty appliance switch available for automated control of heavy duty loads such as air
conditioning and pool pumps
• Streamlined, popular Decora styling complements interiors and is compatible with other Decora devices
• Limited Two-Year Warranty
Receptacle Receivers
• Available in commonly used NEMA configurations
• Fits in standard wall boxes to replace regular receptacles
• Leviton’s patented Intellisense technology virtually eliminates signal problems due to line noise
• Streamlined, popular Decora styling complements interiors and is compatible with other Decora devices
• Limited Two-Year Warranty
Receiver Modules
• Universal low voltage module can automate devices operated at low voltages such as sprinklers, skylights
and heating/AC systems
• Fixture modules provide direct control for fixtures where only remote control is necessary
• Limited Two-Year Warranty
Wall Switch Receivers U S
Description
Rating
Cat. No.
Single Pole Switch provides manual and remote ON/OFF control. Neutral connection required.
The pilot light is ON when switch is ON. Packed with ivory and white rocker and frame. Kits for other
colors must be purchased separately (see chart). Requires 6287 when used with electronic loads
such as compact fluorescent lamps.
3-Way (Multi-Location) Switch provides manual and remote ON/OFF control in multi-station switching
circuits when used in conjunction with one or more Remote Switches. Neutral connection required. The pilot light is ON when switch is ON. Packed with ivory and white rocker and frame. Kits for other colors must be purchased separately.
15A-120 60 Hz
Incandescent,
Inductive or Resistive
6291-WI
15A-120VAC 60Hz Incandescent,
Inductive or Resistive
6293-WI
184
For technical support call 800-824-3005
Online catalog available at leviton.com
Home Automation
Residential Grade
Color Change Kits for Wall Switch Receivers U S
Rocker and Frame
White
Ivory
Almond
Gray
Black
DRK0R-00W
DRK0R-00I
DRK0R-00A
DRK0R-00G
DRK0R-00E
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 0°C to 55ºC
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• NOM Certified (#057)
Wall Switch Remotes and Receivers U S
Description
Rating
Cat. No. Color
3-Way and 4-Way (Multi-Location) Remote Switch —
For use with 6293 DHC Multi-Location Switch as a remote switch. The 6294 provides 3-way, 4-way
and higher-level control in conjunction with these
units. It cannot be used for any other purpose in the
DHC network. For use with 6293 unit only.
Double Pole Wall Switch – provides
local and remote ON/OFF control.
Intended for control of pool pumps, air conditioning
units, spa heaters and pumps and other large
residential loads.
No Load Rating – 120VAC
6294
W, I, A
20A 2HP
250VAC 60Hz
6371
I
6293-WI
Color Change Kits for Wall Switch Receivers U S
Rocker and Frame
Ivory
White
Almond
Gray
Black
DRK0R-00I
DRK0R-00W
DRK0R-00A
DRK0R-00G
DRK0R-00E
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• NOM Certified (#057)
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 0°C to 55ºC
Color
To order specific colors, add suffix to Cat. No. as
follows: White (-W), Ivory, (-I), Almond (-A)
6371-1
For technical support call 800-824-3005
Online catalog available at leviton.com
185
Home Automation
Residential Grade
Receptacle Receivers U S
6227
Description
Rating
Cat. No.
Color
Split Duplex Wall Receptacle – Its top outlet
provides remote ON/OFF load control in response
to controller command signals, and its bottom
outlet is continuously live. The 6227 will not
respond to ALL LIGHTS ON command.
Duplex Wall Receptacle – Same as 6227, but with
both top and bottom outlets providing ON/OFF control
in response to controller command signals.
Feed-through load lead allows control of receptacles
downstream. No local control available.
Single Wall Receptacle** - provides ON/OFF control,
and no local control is available.
ALL LIGHTS ON command.
15A-120VAC
6227
60Hz AC only;
NEMA 5-15R
W, I, A
15A-120VAC 60Hz AC only;
NEMA 5-15R
6280
W
15A-120VAC 60Hz AC only;
NEMA 5-20R
6296
W, I
Single Wall Receptacle** - Equipped with Intellisense
(gated automatic gain control). The 6298 provides ON/OFF control, and no local control is available. It wires easily into any standard wall box using
supplied 6-inch leads. It will not respond to
ALL LIGHTS ON command.
20A-250VAC 60Hz AC only;
NEMA 6-20R
6298
W
CSA Certified except where indicated by **.
6280
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• NOM Certified (#057)
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 0°C to 55ºC
Color
To order specific colors, add suffix to Cat. No. as
follows: White (-W), Ivory, (-I), Almond (-A)
6296
6298
186
For technical support call 800-824-3005
Online catalog available at leviton.com
Home Automation
Residential Grade
Receiver Modules U S
Description
Rating
Cat. No.
Universal Low Voltage Module – This receiver interfaces between the
low voltage device and the 120VAC wiring network. It can operate sprinkler
systems, designated lighting, skylight closures, heating systems, garage door
openers and other lighting and motor loads. The 6337 can be set to operate
the relay only, the alarm only, or both the relay and the alarm. Can also be set
for momentary operation so that the relay and/or the alarm will be turned on
for approximately 2 seconds in response to any ON command.
Does not respond to ALL LIGHTS ON or DIM/BRIGHT commands.
Contacts: 5A 12V DC, 100VA 30V DC Inductive
Fixture Relay Module – Can be mounted at either an incandescent or
fluorescent fixture by means of adhesive strips. Responds to
ON/OFF commands from controllers. Equipped with leads
for easy installation.
Dimming Fixture Module – Can be mounted at an incandescent fixture
by means of adhesive strips. Responds to
ON/OFF, DIM/BRIGHTEN and ALL LIGHTS ON/ALL OFF commands from
controllers. Equipped with leads for easy installation.
No Load Rating
120VAC 60Hz AC only
6337
15A-120VAC 60Hz AC only, Incandescent,
Inductive or Resistive
6375
300W Incandescent
120VAC 60Hz AC only
6376
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• NOM Certified (#057)
6337
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 0°C to 55ºC
6375
Related Products
Use Leviton Power Extenders to extend the load capacity of DHC dimming wall
switch receivers. See page 227 for more information.
DHC RF Products, Amplifiers and Noise Filters
Specifications and Features
Surge Protective Devices
• Real time diagnostic visual indicator shows power and suppression status for each protected phase
• 51110-PTC Multi-Media Panel protects AC, phone/fax/modem and CATV/satellite lines from transient
voltage surges
• 52120-M2H features user-replaceable surge modules
• Limited Ten-Year Warranty
Couplers and Attenuator
• HCA02-10E System Amplifier/Coupler/Repeater must be installed in all DHC installations to ensure
adequate signal strength
• 6284 and 6285 are used to stop extraneous noise and signals from degrading DHC network operation.
• Limited Two-Year Warranty
Wall Switch Receiver
• These devices are designed to eliminate interference from appliances, electronic ballasts and home
electronics in order to ensure top performance from DHC systems
• Limited Two-Year Warranty
For technical support call 800-824-3005
Online catalog available at leviton.com
187
Home Automation
Residential Grade
Network Integrity Products
Panel-Mounted Surge Protective Devices (SPD) – Provides homes with protection from high-energy transient voltage
surges that can damage sensitive electronic circuits in computers, audio and video components and electronic
appliances. DHC components incorporate micro-circuitry and Leviton highly recommends protecting the DHC network
from power line surges. Leviton panel-mounted surge protective devices feature unique hybrid suppression circuitry
for outstanding surge protection. The following devices are compatible with all DHC components.
Network Integrity Products U S
51120-1
51110-PTC
Description
Max. Surge Current UL1449
(8 X 20µs wave) L-N
Rating L-N
Rating
Cat. No.
Single Phase – Standard J-box metal enclosure with pre-punched
standard knockouts
3 Phase WYE – Standard J-box metal enclosure
with pre-punched standard knockouts
Single Phase – NEMA 3R enclosure suitable
for outdoor use
Single Phase – Features sine wave tracking, redundant protection
and replaceable/surge modules;
NEMA 12 enclosure with hinged cover
Single Phase Multi-Media Panel – Provides surge protection for
AC power line, 2 pairs of phone/fax/
modem connections and dual CATV/satellite feeds using F connectors;
painted steel NEMA 1 enclosure with
4 perforated 7/8” knockouts
50kA
500V
120/240VAC 51120-1
50kA
500V
120/208VAC 51120-3
50kA
800V
120/240VAC 51120-3R
100kA
400V
120/240VAC
AC: 48kA
Tel: 1.9kA @ 3.8kV
CATV: 2kA
AC: 400V
Tel: 220V
CATV: 25V
120/240VAC 51110-PTC
51120-M2H
Note: A panel-mounted surge protective device should be installed at the service panel in every DHC installation.
TESTING AND CODE COMPLIANCE
• Listed to UL 1449 (2nd Edition) Standards
• UL Listed (File #E-146315)
• CSA Certified (File #LR-94773)
• NOM Certified (#057)
188
For technical support call 800-824-3005
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 0°C to 55ºC
Online catalog available at leviton.com
Home Automation
Residential Grade
Network Integrity Products U S
Description
Rating
System Amplifier/Coupler/Repeater with Built-In Test
—
Signal Generator – Performs a variety of functions to
ensure outstanding DHC system performance and
reliability. Couples transmitter (programmer and controller)
signals generated on the 120V leg where the transmitter
draws power onto the other leg in a 120/240V single phase
3-wire residential wiring system. The HCA02-10E also
amplifies and repeats command signals to maintain proper
signal strength through the DHC system. Green pilot light
indicates unit has power. Lamp will indicate when signal is
being transmitted. A red error LED indicates the Intellisense
feature is activated. The unit provides convenient test signal
transmission for easy signal strength verification at individual
DHC module locations using the 6386 Signal Strength Indicator.
The HCA02-10E should be installed at the main panel on its
own dedicated 15A breaker in accordance with NEC
requirements. The HCA02-10E cannot be used in a
3-phase system.
Signal Bridge/Passive System Coupler – Couples the DHC 120/240V 60Hz AC only
command signal onto the 120V legs of the power system
to ensure sufficient command signal strength throughout
the DHC network. (Note: 6299 should NOT be installed
in the same panel as HCA02-10E).
Signal Attenuator, 2-Phase – Attenuates (“knocks down”) 2-Phase 120/240V and
external noise and signal levels entering the DHC network. 120/208V 60Hz AC only
The 6285 can be used to block interference from appliances,
electronic ballasts and home electronics to ensure top
performance from the DHC network. Also used to block
signal leakage (attenuation) caused by capacitive filters and
electronic power supplies.
Multi-Phase Blocking Coupler – The 6284 is installed 120V, 120/240V and between the incoming electrical service and the service
120/208V 60Hz AC –
panel in apartment buildings, condominiums, attached-unit
Max. 200 Amp panel
dwellings and homes sharing the same side of the electrical
transformer. Keeps extraneous electronic noise and signals
from entering or leaving the DHC network.
Cat. No.
HCA02-10E
HCA02-10E
6299
6285
6299
6284
Note: An HCA02-10E System Amplifier must be installed in all panels in every DHC installation to ensure adequate signal strength.
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-3413)
• NOM Certified (#057)
For technical support call 800-824-3005
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 0°C to 55ºC
Online catalog available at leviton.com
189
Home Automation
Residential Grade
Network Integrity Products U S
6287
6288
Description
Rating
Cat. No.
Noise Block- The 6287 is designed for use with DHC switch modules that include a means for
connection to neutral. This device may be wired
on the LOAD side of a DHC switch module
(except 6383), or on the LINE side of any fixture
using an electronic ballast, a low voltage ballast
or any noise generating source that does not require
more than 5A 120VAC. The 6287 prevents
interference generated by fixture components
from interfering with DHC signals.
Plug-In Noise Filter – Electrical appliances may generate “noise” that could interfere with proper
signal transmission. When the offending appliance
is isolated and plugged into the 6288 Noise Filter,
which is in turn plugged into a receptacle, stray noise
is filtered out, ensuring a clear signal. Color: Brown
In-Line Noise Reducer – The 6289 Noise Reducer filters electrical “noise” and signals with frequencies
above and below the 121 kHz signal. The 6289 may be
installed at the “noise” or signal source or at the module
affected by the interference. Depending on the source
of the interference, the 6289 may be wired phase to
neutral or phase to phase.
DHC Power Line Carrier Test Equipment Signal Strength Indicator – Measures command signal strength
at individual module locations. Minimum signal strength
required for proper DHC Power Line Carrier
component operation is 100mV.
5A-120V 60Hz AC only
6287
5A-120V 60Hz AC only
6288
—
6289
—
6386
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• NOM Certified (#057)
MATERIAL CHARACTERISTICS
Engineering Thermoplastic UL-94, V2 Rating
Operating Temperature: 0°C to 55ºC
6289
6386
190
For technical support call 800-824-3005
Online catalog available at leviton.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement