keep for future reference

keep for future reference
IE
CT
TRU
GERBRAUCHSANWE
ISUN
INS
TR
U
RUKTIO
FOR YOUR CHILD'S SAFETY
INST
alpha™
NER
READ
G-
R-
INS
NES -
NE
NS -
CCIO
JO
INSTRUCTIO
TRU
KS
S-
INS
THESE INSTRUCTIONS
CAREFULLY
BEFORE USE
protect™
Capsule Base
Group 0+
Suitable for birth to 13kg child
KEEP FOR FUTURE REFERENCE
The Capsule Base complies with requirements applicable in market
of sale
For rights & remedies, refer www.philandteds.com/warranty
Please register your purchase through our online warranty registration
by visiting: www.philandteds.com/register
philandteds.com
mountainbuggy.com
Congratulations on choosing
your new car seat capsule base!
Product Care
Safety Warnings
Features
Instructions
Product care
GENERAL INSTRUCTIONS
Group 0+
Suitable for birth to 13kg child.
THIS DOCUMENT CONTAINS IMPORTANT
INFORMATION AND MUST BE KEPT WITH
THE SEAT FOR FUTURE REFERENCE.
This product should be used rearward
facing until the child is too large for the seat
or exceeds 13kgs.
This product should never be used forward
facing.
CLEANING & CARING
Check your car seat for cuts & bruises. If your product is
damaged in any way, or you’re not sure how to use it, please
consult our web support from where you can access a local
customer care team.
Caring for your car seat
Unlike children, your car seat likes to stay clean.
Cleaning the fabric cover:
• Read the label on the removable cover for washing instructions.
• Hand wash in warm water only.
• DO NOT tumble dry.
• The fabric cover can be easily removed for washing.
1. Remove the harness by gently feeding it through from the
front to the back of the seat.
2. Next remove the crotch strap, including buckle, by rotating it a quarter turn and feeding it out through the seat
shell. The cover should now be free of obstruction.
3. Remove the cover and hand wash it at 30ºC; dry flat away from direct heat.
Product care
4. To replace the cover follow the instructions above in
reverse.
Cleaning the harness, chest pads and seat:
• Sponge clean only. Use hand soap and warm water.
• DO NOT use solvents, harsh detergents or washing up
liquids as these may weaken the harness and seat.
• Use only mild detegents.
• DO NOT lubricate or oil any part of the seat.
• DO NOT wring.
• Dry thoroughly before storage.
• Store in a well ventilated space, away from direct
sunlight which could damage or fade your product.
• Store in a safe place when it is not being used. Avoid
placing heavy objects on top of it.
• DO NOT allow to come into contact with corrosive
substances e.g. battery acid.
The correct use and maintenance of your carseat will
ensure it gives long and trouble free use. When somebody
else is using your car seat, ensure that they also know how
to use it and especially the correct way to adjust it. The
safety of your child is your responsibility.
IMPORTANT
Please read thoroughly before commencing installation
as an incorrect installation could be dangerous.
• Only suitable for use in vehicles fitted with a three-point seat belt approved under UN/ECE 16 or equivalent standard.
•
The category of this child restraint system is “SEMI-UNIVERSAL” and it is suitable for installation in the vehicles and in the seat positions indicated in the vehicle list on
philandteds.com or mountainbuggy.com.
• If in doubt, consult the manufacturer, retailer or certified installer.
Safety Warnings
WARNINGS
• PLEASE READ ALL INSTRUCTIONS IN THIS
MANUAL AND IN THE VEHICLE OWNER’S
MANUAL RELATED TO CHILD SAFETY SEATS
CAREFULLY AND UNDERSTAND THEM.
INSTALL AND USE THE CHILD SAFETY
SEAT AS DESCRIBED IN THE INSTRUCTION
MANUAL. FAILURE TO DO THIS COULD
RESULT IN SERIOUS INJURY OR DEATH OF
YOUR CHILD. THE INSTRUCTIONS SHALL BE
RETRAINED WITH THE CHILD RESTRAINT
FOR THE FUTURE USE.
• BECAUSE OF POTENTIAL MEDICAL ISSUES
INHERENT IN LOW BIRTH WEIGHT AND
PREMATURE INFANTS, ALWAYS HAVE A
TRAINED PROFESSIONAL DOCTOR, OR
HOSPITAL STAFF MEMBER ASSESS THE
SUITABILITY OF THE CHILD RESTRAINT
PRIOR TO LEAVING THE HOSPITAL OR USING
THE CHILD RESTRAINT.
• Do not remove any labels on the child safety
seat. Important information is contained on the
labels.
• Do not use a child safety seat with damaged or
missing parts.
• Do not use damaged or frayed harness straps
or vehicle belt.
• Do not modify or attempt to modify the child
safety seat in any way.
• Do not take apart or attempt to take apart this
child safety seat except as instructed in this
manual.
• Do not use a child safety seat that has been in
a crash. A crash can cause damage to the child
safety seat that you cannot see.
• Do not replace the child seat cover or harness
with any other than the ones we recommend
as these parts are integral to the child safety
seat’s performance.
• Make sure that the child safety seat does
Safety Warnings
•
•
•
•
•
•
•
not become trapped by folding or moveable
passenger seat or in the door of your car.
Do not use on the vehicle seats that face
the sides or rear of the vehicle Use the child
safety seat only on the vehicle seats that
face forward. According to accident statistics,
children are safer when properly restrained
in the rear seating positions than in the front
seating positions.
Do not use in any configuration not shown in
the instructions.
Never use this child safety seat with 2 point
vehicle belts.
Do not use belt routing methods not shown in
these instructions.
Do not allow children to play with or adjust the
child safety seat.
Always check the tightness of the restraint and
the harness before each use.
Do not use a second-hand child seat or child
seat whose history you do not know.
• Do not use this child safety seat in a passenger
seat with an active airbag unless the vehicle
manufacturer confirms that it is safe.
• This child restraint should be securely belted
in the vehicle even when not in use. In a crash
or sudden stop, an unsecured child safety seat
may injure other occupants.
• Make sure to properly secure any loose
objects, such as luggage or books, in your car
as they may cause injuries in the event of an
accident.
• Never leave your child unattended in a car
even for a short time.
• Never take your child out of the child safety
seat when the vehicle is moving.
• Never use this child safety seat without the car
seat cover.
• Hot! Cover the child safety seat when left in
direct sunlight. Parts of a child safety seat may
Safety Warnings
•
•
•
•
•
become too hot for the child’s skin. Always
check surfaces before placing a child in the
child seat.
Do not use any load bearing contact points
other than those described in the instructions
and marked in the child restraint.
The rigid items and plastic parts of a child
restraint must be so located and installed that
they are not liable, during everyday use of the
vehicle to become trapped by a movable seat
or in a door of the vehicle.
We recommended that any straps holding the
restraint to the vehicle should be tight, that any
straps restraining the child should be adjusted
to the child's body, and that straps should not
be twisted.
Important. Please ensure that any lap strap
is worn low down, so that the pelvis is firmly
engaged.
Never use this child restraint with any other
•
•
•
•
•
•
•
•
base except ones that the manufacturer
permits.
Always make sure all vehicle belts and harness
straps are not twisted before each use.
Never leave the child in the child seat when
the harness straps are loose or undone.
Do not leave your child in this child restraint for
an extended period of time.
Always install the child safety seat in a rearfacing position.
Never install the child safety seat forwardfacing.
Do not use alternative routings not shown in
these instructions.
Make sure all folding passenger seats are
property latched.
All occupants of the vehicle should be correctly
restrained. Unrestrained passengers may
be thrown into other passengers and cause
serious injury or death in a crash.
Safety Warnings
• Always make sure the handle is properly
locked in the upright carrying position before
carrying a child in the child seat.
• Never place the car seat or infant carrier near
the edge of an elevated surface or on a soft
item such as a seat cushion or mattress. The
car seat or infant carrier could fall off these
surfaces and cause serious injury or death.
• Never use the child safety seat with a shopping
cart.
• Only suitable for use in the listed vehicles
fitted with 3 point safety belts, approved to
ECE Regulation No. 16 or other equivalent
standards.
• Make sure the adult safety-belt buckle does
not contact or interfere with the main load
bearing contact points on the car seat.
• Contact the child restraint manufacturer or your
retailer if in doubt about these points.
Safety Warnings
Do not use on
a passenger
seat with a front
airbag.
On outer rear seat
YES
On centre rear seat with
3-point belt
YES
On a rearward-facing seat
NO
On seats facing sidewards
NO
On rear seat with lapbelt only
NO
Front seat with airbag off
YES
Safety Warnings
CHECKLIST BEFORE USE
Inspect
• Child restraint free of damage
Verify Child within Size Range
• Weight between 0-13kg
• Height 74cm or less (top of head 2cm or more below top of shell)
Install Child Restraint Rearward-facing in Safe
Location in Vehicle
• Vehicle seats that face front of vehicle only
• Handle locked in specified position
• Child facing rear of vehicle
• Position with NO active airbag
• 3 point (shoulder/lap) belt used
• Seat belt not twisted
• Belt path followed
• Tight against vehicle seat
Secure Child Properly in Child Restraint
• Correct shoulder strap height
• Harness not twisted
• Harness low across hips
• Harness secure and tight
Features
1
15
10
2
16
3
4
17
11
18
5
6
19
12
7
13
8
9
14
01Handle
05Harness
09
02
Head Support
06Buckle
10Canopy
Adjuster Strap
03
Shoulder Pads
07
Adjuster Button
11
Handle Release Button
04
Infant Pads
08
Crotch Pad
12
Lap Belt Guide
Features
17 18Shell
21
19 Adapter* (only for some models)
20
Storage for the Manual
21
Lock Off
22
Release Button
23
Support Leg
24
Support Leg Adjustment Button
22
23
24
13
Crotch Belt
14
Crotch Strap Slot
15
Shoulder Belt Guide
16
Harness Slot
Splitter Plate
20
Instructions
1a
HARNESS POSITIONING
1a
Position the height of harness according to the child’s height. The harness straps should be level with the child’s shoulders. Do not use the child restraint
with the harness if the child’s shoulder are above the heightest slots in the backrest or if the child’s
weight exceeds 13kg.
1b
Put the two buckle clips together, then lock into the female buckle. (1b)
Tighten the straps until they are in contact with your child's body.
CAUTION!
The hip belt must lie as low as possible over your child's hips.
1b
Instructions
ADJUSTING THE HANDLE
2a There are 4 positions: In vehicle position (A), Carry position (A), Middle position (B,C), and Stationary position(D)
2a
2b To adjust, squeeze handle release buttons on both sides, then rotate the handle, The handle will lock
into position.
2c You should hear a click when the handle button
is engaged and handle is locked into the upright carrying position.
2b
2c
WARNING:
Always make sure the handle is securely locked in
the upright carrying position before carrying.
Instructions
ADJUSTING THE HARNESS
3a Adjust the shoulder straps height so they are level with, or just below child shoulders.
3b To adjust the height of shoulder straps, you need to take out the straps from the splitter plate located in the rear of the seat.
3a
3d Pull both straps through the shell and seat cover.
3b
3d
3c
3e
3e
Thread the harness straps through the proper
harness slot. Make sure that both straps are even and not twisted. From the rear of the seat, secure the
harness strap onto the splitter plate (reverse the 3b). Pull to make sure the harness straps are firmly secured onto the splitter plate. Remember, shoulder straps should be level with, or just below
the child’s shoulders (3a).
Instructions
4a
4b
ADJUSTING THE CROTCH STRAP POSITION
The crotch strap adjusts to 2 positions to fit the child’s size. Only move crotch strap position to outer position when the child weighs more than 7kg. Typically this is when the harness is in middle slots.
4a
To move the crotch strap, locate the metal plate attached to the crotch strap under the child restraint (4a). Rotate the metal plate and push it through the shell and seat cover. Loosen harness adjuster strap if it is in the way.
4b
Locate the appropriate crotch strap slot and insert the
metal plate and crotch strap through the seat cover and shell (4b). Pull on harness buckle to make sure crotch strap is securely installed.
Instructions
SECURING THE CHILD IN CHILD RESTRAINT
5a Press the adjuster button on the front center of the seat, and pull on both shoulder straps to loosen the harness.
5a
5b
5c
5b Press the red button on the buckle to release the
shoulder straps and move them to the side.
5c
Place child’s bottom on the seat and the child’s back
flat against the back of the child restraint. This will increase the child’s comfort and allow the harness to properly secure the child. Slide shoulder straps over the child’s shoulders (5c). Make sure the harness is at or below the top of the child’s shoulders.
Instructions
5d Align the top and bottom buckle clips to form
one clip.
5e Insert into the buckle until you hear a “click”. Make sure the shoulder straps are not twisted. Adjust the shoulder pads over the centre of the child’s shoulders.
5d
5f
5e
Pull the harness adjustment strap until shoulder straps are tight against the child.
5g For proper tightness, one finger should fit between the
harness straps and the child’s shoulders.
To remove the child, loosen shoulder straps and release buckle.
5f
5g
Discontinue use when child’s weight > 13kg, height > 74cm or head is less than 2cm above the top of the shell.
Instructions
APPROVED USES OUTSIDE OF THE VEHICLE
• ALWAYS secure the child with the harness when placing the child in the child restraint.
• ALWAYS make sure the handle is securely locked before using. For use as an infant carrier, place handle in carrying station (A in 2a). For rocking, place the child restraint on level ground, make sure handle is in carrier positions (A in 2a) and lock gently.
• For feeding, resting and sleeping, place seat on secure and level surface away from the edge of elevated surfaces, and put handle in the stationary position (D in 2a).
• It is recommended that a young child should not be left in a child seat for more than 2 hours without a break.
Instructions
6a
INSTALLATION IN THE VEHICLE WITHOUT BASE
6a Place the child restraint rear-facing on the vehicle seat and make sure the handle is in specified position. The child will face the rear of the vehicle.
6b Route the vehicle lap belt through both lap belt guides and buckle the seat belt.
6b
6c Route the vehicle shoulder belt around the back of the child restraint and through the shoulder belt guide.
6d If vehicle shoulder belt is too short, please move vehicle seat belt height adjustment to the lowest possible height.
If the vehicle belt is still too short, try another seating position.
6c
6d
Instructions
6e
Adjust the child restraint to the proper recline to ensure maximum protection for the child. A tightly rolled towel
under the front edge of the child restraint can be used to achieve the correct recline.
WARNING:
Do not route the vehicle belt using any other path when using the child seat. For assistance contact our Customer Service team.
6e
Do not use 2 point vehicle belt to install this child seat.
Only install the child restraint rear-facing on forward-facing vehicle seats.
Make sure the child is properly secured in the child restraint, and the child restraint is tightly installed in the vehicle.
Instructions
INSTALLATION IN THE VEHICLE WITH BASE
7a Place the base onto the vehicle seat.
7a
Pull out the support leg under the base, put the base flatly on the vehicle seat. Push the base to the back of vehicle seat with anti-rebound bar against the back of vehicle seat.
7b Pull vehicle belt through slot on either side of base.
7b
7c
7c
Unlock the lock-off on base, put vehicle belt through lock-off and belt slot on the other side, then lock the lock-off. When you hear a “click”, that means the lock-off is well locked.
Smooth out and fasten vehicle belt.
Adjust the length of support leg, make sure support leg touching vehicle floor firmly.
Instructions
7d Put carrier rear facing on the base, and press the
carrier downward. When hearing a “click”, it shows carrier
is correctly installed to the base.
7e Try to pull out the carrier to double check carrier is
firmly locked to the base.
7d
7e
Instructions
REMOVING THE CHILD SAFETY SEAT
8a Pull up the red release handle in front of the base, unlock the carrier from base, at the same time lift up the carrier vertically, then the carrier can be taken out.
8a
8b
8bAttention:
When taking the carrier out of the base, please check and confirm the handle is on vertical position to avoid risk of baby falling from the carrier.
Instructions
9a
9b
9c
9d
REMOVING THE CANOPY AND COVER
9a / 9b
On the side of canopy, pull the tab and detach the canopy frame.
9c / 9d
Pull out the cover from shell front.
© Phil and Teds Most Excellent Buggy Company Ltd 2012.
We (Phil and Teds Most Excellent Buggy Company Ltd) own the intellectual property rights in our brands, designs and inventions featured in this
publication. These include, without limitation, the phil~teds, adapt~survive!, ~, INLINE trade marks and INLINE DOUBLE BUGGY shape. We actively
pursue people who infringe our intellectual property.
©Phil & Teds Most Excellent Buggy Company Ltd 2012.
Nous (Phil and Teds Most Excellent Buggy Company Ltd) sommes détenteurs de tous les droits de propriété intellectuelle associés à nos marques, modèles
et inventions mentionnés dans le présent document. Ceux-ci incluent, sans que cela soit limitatif, les marques commerciales phil~teds, adapt~survive !, ~, et
INLINE et la forme du INLINE DOUBLE BUGGY. Nous engageons des poursuites contre tous ceux qui enfreignent nos droits de notre propriété intellectuelle.
© Phil and Teds Most Excellent Buggy Company Ltd 2012.
Wir (Phil and Teds Most Excellent Buggy Company Ltd) sind Eigentümer aller geistigen Eigentumsrechte bezüglich unserer in dieser Veröffentlichung aufgeführten Marken, Designs und Erfindungen. Diese schließen die Marken phil~teds, adapt~survive!, ~, und INLINE sowie die Form INLINE
DOUBLE BUGGY ohne Einschränkungen ein. Personen, die unsere Eigentumsrechte verletzen, werden von uns aktiv verfolgt.
© Phil and Teds Most Excellent Buggy Company Ltd 2012.
Nos pertenecen a nosotros (Phil and Teds Most Excellent Buggy Company Ltd) los derechos de propiedad intelectual de nuestras marcas, diseños
e inventos mostrados en la presente publicación. Se incluyen, sin limitarse a, las marcas phil~teds, adapt~survive!, ~, e INLINE la forma de INLINE
DOUBLE BUGGY. Iniciaremos acciones legales contra aquéllos que violen nuestra propiedad intelectual.
© Phil and Teds Most Excellent Buggy Company Ltd 2012.
Wij (Phil and Teds Most Excellent Buggy Company Ltd) bezitten de intellectuele eigendomsrechten op onze merken, ontwerpen en uitvindingen
die in deze publicatie worden vermeld. Dit zijn, zonder beperking, de handelsmerken phil~teds, adapt~survive!, ~, INLINE en de INLINE DOUBLE
BUGGY-vorm. We dienen daadwerkelijk een aanklacht in tegen degenen die inbreuk maken op ons intellectueel eigendomsrecht.
AU/NZ
AU/NZ
Mountain Buggy Australasia
102-112 Daniell Street
Newtown, Wellington 6021
New Zealand / Nouvelle-Zélande.
+ 64 4 3800 833
EUR
phil&teds
102-112 Daniell Street
Newtown, Wellington 6021
New Zealand / Nouvelle-Zélande.
+ 64 4 3800 833
EUR
Mountain Buggy Europe
Klavermaten 37C
7472 DD Hof van Twente (Goor)
NETHERLANDS / Pays-Bas.
+ 31 (0) 547 352 727
USA/CAN
phil&teds Europe BV
Klavermaten 37C
7472 DD Hof van Twente (Goor)
NETHERLANDS / Pays-Bas.
+ 31 (0) 547 352 727
USA/CAN
Mountain Buggy USA
221 Jefferson Street
Fort Collins, CO 80524
USA.
1 800 916 8442
FRA
8078-01
@
phil&teds USA Inc
221 Jefferson Street
Fort Collins, CO 80524
USA.
1 800 839 4985
FRA
Mountain Buggy France
15 rue Gertrude Bell
56000 Vannes
FRANCE.
+ 33 (0) 2 97 44 88 26
[email protected]
@
phil&teds France
15 rue Gertrude Bell
56000 Vannes
FRANCE.
+ 33 (0) 2 97 44 88 26
[email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement