FZ Vision Sensors Promotional Brochure
Vision Sensors
FZ Series
World’s First
“Real Color Sensing”
Advanced Color Perception
Seeing Colors
with
Humanlike Precision
2
Real Color Sensing
■ “Advanced Real Color Sensing (ARCS)”
Intelligent Camera
■ Revolutionary Intelligent Camera
with Auto Focus Function
Integrated Controller
and LCD
■ Integrated Controller and LCD for Easier Operation
Fits On-site Needs
Applications and
Measurement Items
Specifications
N o t e : A R C S i s a n a c r o ny m fo r A d va n c e d R e a l C o l o r S e n s i n g .
3
T h e Wo r l d o f R e a l C o l o r S e n s i n g *
*Patent Pending
The “Advanced Real Color Sensing (ARCS)” Engine
instantly processes up to
16.77 million colors.
4
Real Color Sensing
■ Humanlike Sensing with ARCS
■ 256 colors
Intelligent Camera
The “ARCS (Advanced Real Color Sensing)” Engine achieves high-precision sensing.
This technology is 65,536 times better than earlier processing technology, where measurements
were based on monochrome contrast.
An amazing 16.77 million colors are captured and processed at high speed to approach human color
perception.
■ 16.77 million colors
B
Lighter
Darker
R
G
■ Previous Monochrome
Processing
■ Real Color Processing
Conver ted to gradations of gray
so color differentiation is not
possible if the shape is the same.
Both shape and color information
is processed so the target item
can be detected from other
workpieces of the same shape.
Fits On-site Needs
With “Real Color Sensing”, the
inspection workpiece and the
image being processed are the
same, so the image does not
need to be adjusted.
Integrated Controller
and LCD
The amount of image infor mation
was reduced with monochrome
processing. Lighting and other
adjustments were required to
extract the features of the
workpiece.
“Real Color Sensing” can also be used in applications such as detecting differences in gold or black
gloss and multi-color defect judgments, where judgments used to be unstable. “Real Color Sensing”
makes a quantum leap in the applicable range for image sensing.
Previous
Monochrome
Processing
Previous
Color Extraction
Processing
Real Color Processing
Applications and
Measurement Items
■ Applications
Specifications
Detecting
Gold Plating
on Connectors
No contrast is discer nable so inspection is
not possible.
Difficult to extract only
gold color because of
surface gloss.
Large volume of data
enables stable
inspections.
No contrast is discer nable so inspection is
not possible.
Color extraction
settings required for
each color.
Stable inspections are
possible even without
filtering or other settings.
Inspecting
LED Indicator
Arrangement
Note: ARCS is an acronym for Advanced Real Color Sensing.
5
Revolutionary "Intelligent Camera*"
with Auto Focus Function
*Patent Pending
Focusing and aper ture adjustment that used to require
highly skilled operators are now completely automated.
6
Real Color Sensing
Intelligent Camera
■ Zoom Functions
The Intelligent Camera is a radically new camera module that covers the approximately 3 to 15 mm
and 13 to 100 mm fields of vision with two lenses (see note). The Intelligent Camera has the
flexibility for applications such as production lines for multiple models where setup changes are
frequent and field of vision changes required by additional specifications.
■ Model with Narrow Field of Vision
Approx. 3 mm
100 mm
13 mm
70 to 190 mm
Note: The field of vision changes depending on the distance from the lighting to the workpiece.
For details, check Ratings and Specifications and the optical graphs for each camera.
Integrated Controller
and LCD
Approx.
15 mm
■ Model with Wide Field of Vision
■ Intelligent Lighting
Light pattern
Light modulation level
(4 points individually controlled)
(256 gradations)
Focus and aperture adjustments that have always depended on human experience and perception are
now completely automated, enabling stable measurement without variation.
Out of focus
Applications and
Measurement Items
■ Auto Focus and Auto Iris
Fits On-site Needs
The distinguishing feature of “Real Color Sensing” is the uniform irradiation of the field of vision
by using white LED lighting. A variety of lighting patterns are available for selection.
The optimum lighting pattern can also be registered to enable the use of stable lighting.
Specifications
Settings var y
because manual
adjustment
relies on human
perception.
No variations
with auto focus
and auto iris.
■ Remote Control
All settings can be controlled from the Controller, allowing remote monitoring and control of focus,
aperture, field of vision, and lighting of cameras in remote locations. Set values can be managed
from the Controller, allowing application to multiple production lines and quick setup changes.
7
Integrated Controller and
LCD for Easier Operation
Touch-pen input enables
intuitive, Windows-style
screen operation.
This compact, multifunctional
Controller-LCD features
four USB por ts.
■ Multi-layout Screen
Flexible Measurement Image
Layout
Up to four images can be displayed
on a single screen.
Select the display layout to
match the number of cameras
or to suit the application.
Flexible Selection of
Measurement Result Items
The display area for judgment
results or detailed results from
a series of measurements can be
arranged to suit the application.
■ Select from Inspection Items
Select the inspection: the required processing items will be automatically registered.
For example, if Dimension Measurement is selected, then the two Edge Position processing items and
the Calculation processing item will automatically be selected.
4. Edge position
Measures the edge position for
the star ting point.
5. Edge position
Automatic settings
6. Calculation
The processing items for an application are easily selected.
8
Measures the edge position for
the end point.
Measures the length from the
star ting point and end point edge
positions measured above.
Real Color Sensing
■ Windows-style Screen Operation for Better Viewability
Easier operation achieved through the use of Windows-style operation, with extensive use of
menus and command lists.
Intelligent Camera
Frequently used functions
displayed on toolbars.
Past measurement images can
also be displayed.
Results from each measurement series can be viewed.
Online Manual
Touch pen operation.
■ Integrated Controller and LCD
The LCD and Controller in one Unit-compact and space-saving.
Slimmer wiring and power supply sections together with four USB ports for expansion.
Fits On-site Needs
Front
Integrated Controller
and LCD
The manual is now provided online. Settings procedures and ter minology can
now be viewed anytime
right on the Controller.
Side
Simple selection and
installation complete
with just a camera and
Controller.
2 USB por ts on side
Industr y-first four USB por ts on front and side
Applications and
Measurement Items
2 USB por ts on front
Note: The desktop stand is optional (sold separately).
Suitable for Wide Range of Operation Systems
● As an interface
to the manual
USB memor y
● As an interface
for operation
USB memor y
Specifications
● As an interface for
saving measurement
images and settings
data
Mouse or other peripheral device
Note: The operation of mouses and other peripheral devices
other than the recommended ones may not be reliable.
■ Flexible Installation Design
Compact and space-saving Integrated Controller-LCD enables
flexible installation in a variety of FA environments.
The type of installation can be selected to match the application.
Installation beside a
production line using
a VESA attachment
Note: VESA attachment available separately (optional).
9
More Advanced to Fit On-site Needs
Input Devices with Flexibility to Suit Inspection Process
Four-camera Control
The FZ Series now includes a Controller with the
capacity to connect to up to four cameras, making
this Controller perfect for applications requiring
inspection at multiple points at the same time,
e.g., side inspection of electronic components
and side inspection of drink bottles.
Side inspection of
drink bottles
Side inspection of
electronic components
Inspecting for foreign
objects on a sheet
Note: The FZ-350-10 Box-type Controller also suppor ts connection to up to 4 cameras.
Multi-input Function
Each camera can now capture up to 16 images.
The next image can be captured during measurement processing.
This function is effective, for example, in applications where multiple measurements
are required for each workpiece, e.g., inspections of rotating workpieces.
Beer
Beer
Camera image
er
First
time
Image processing
Second
time
Third
time
Four th
time
First time
Fifth
time
Second time
Ultra Fast Camera (with par tial function)
High-speed image capture at 80 frames/sec. - the first in the industry for CCD cameras. Input
time is reduced by approx. 4 ms compared to earlier models. Image capture can be even faster if
the partial function is used.
High-speed image capture at 80 frames/s
Intelligent Camera (See note.)
Image capture speed
Select Any Measurement Position
80 frames/sec.
12.5 ms
16.7 ms
Double-speed Camera
(earlier model)
Image capture speed
60 frames/sec.
Note: Does not include shutter time (exposure time).
There is a delay of approximately 4 ms from when the image is captured to when measurement star ts.
10
Real Color Sensing
NEW
Ease of Use On-site Also Improved
Customized Results Display
Function
Trend Monitor Function
Monitoring of measurement value trends
can help prevent production of large
numbers of defective products and can be
useful in analyzing the cause when NG
items are produced.
Text and graphic objects can be displayed
in the image display area for easier
checking of measurement results.
Upper judgment limit
450.000
Time
Alarm range (upper)
400.000
Alarm range (lower)
Lower judgment limit
350.000
Time
Measurement values
over time are displayed
in graph form.
The most recent 1,000
measurement results
are saved in memory.
Processing
item name
Measurement
value
Checking
Evaluation
Simulation Software
Prior Verification of
Obtained Images
Feedback
Online Edit Function
Saved screens can be verified in advance
using the simulation software on a personal computer, then fed back to the Controller. This allows setting changes to be
made without having to stop the line, to
minimize unnecessary rejections in production.
Images obtained during measurement
Saved images
Specifications
Trial measurements can be performed on
a computer using prepared images. Settings, startup, and adjustments can be
verified in advance without requiring a
Controller.
Feedback
Applications and
Measurement Items
Evaluation
Fits On-site Needs
By setting an alarm range, an alarm
can be displayed before reaching
the level of frequent NG items. This
alarm can be used as feedback for
the preceding process in the
production line.
Integrated Controller
and LCD
Any text
Intelligent Camera
Checking
Personal computer
(simulation software)
Evaluation
Changes to
judgment values and measurement areas
Digital camera
Checking
Feedback
Personal computer (simulation software)
Note: The images must be in 24-bit BMP for mat.
Images obtained using the logging function can also
be used.
Refer to the simulation software user's manual for
details.
Note: There are some functions for which settings cannot
be changed during operation, e.g., model registration.
11
Real Color Broadens the Range
of Sensing Applications
Metal components
industr y
Automotive
Food packaging
components industr y industr y
Defect
Phar maceutical
industr y
Electronic
components industr y
Fine Matching
Surface Defects on Metal Par ts
Dir t on Paper Cups
Dirt in colors can be detected without having to
change the lighting color or installation position.
Because there are no effects from the background
color or pattern, surface defects on components
with complicated shapes and dirt on patterns can be
easily detected.
OK item
NG item
Senses dir t in various colors
Difference image
Other Applications
Other Applications
• Dir t and burrs on resin-molded products
• Grease on metal processing surfaces, etc.
• Dir t on printing
• Dir t on food labels, etc.
Search
Color Data
Electrical Cable Arrangement
Inspections using both shape and color data can be
performed by registering a model only once.
Repeated color extraction is not necessary.
OK item
Other Applications
• Button positions on instrument panels
• LED arrangements on PCBs, etc.
12
Mixing of Incorrect Metal
Components
The existence of gloss in similar colors and minute
differences in colors can be determined with high
stability -- something that was difficult with
previous Sensor models.
OK item
NG item
Other Applications
• Inspecting for plating, etc
OK item
Color Area
The color to be measured is specified and the area measured.
The center of gravity position can also be measured.
Colors not registered are not extracted.
Search
Only registered colors are extracted.
Features of the measurement object are registered as an image pattern (model)
and the parts of the input image that most resemble the model are found to
provide the correlation and the position.
Model
For a judgment value (correlation) of 70:
Correlation: 20
A registered OK item image and the input image are overlapped (matched) and the
differences between the images are detected at high speed and with great precision.
Integrated Controller
and LCD
Correlation: 80
Fine Matching
Intelligent Camera
Register the color.
Real Color Sensing
Versatile Measurement Processing Items
OK item image (registered)
Image of
inspection object
Dirt on machine
Printing error
Flexible Search
Minute dirt
Defect near edge
Finds the part in the input image that most resembles the multiple registered
models and detects the correlation (similarity) and position.
Applications and
Measurement Items
OK item
Model
Defect
Performs defect (surface defect) inspections based on variations in brightness
within the measurement region.
NG
Burr
Surface
defect
Specifications
OK
Edge Position
Fits On-site Needs
Overlapped
Uses changes in color within the measurement region to inspect the position of
the measurement object.
Measurement position
(edge position)
Reference coordinates
(Change to suitable location)
The FZ Series Vision Sensors have other processing items not listed here.
Please contact your OMRON representative for details.
13
■ Basic Configuration
Controller with LCD
Box-type Controller
Controllers
FZ-350, FZ-355 (2-camera type)
FZ-350-10, FZ-355-10 (4-camera type)
Controllers
FZ-300, FZ-305 (2-camera type)/
FZ-300-10, FZ-305-10 (4-camera type)
Touch pen (accessory)
LCD Monitor
FZ-M08
Input Devices
Mouse or Trackball
(commercially available
devices with USB interface) Mouse
1414
Camera
Camera
FZ-SLC100/FZ-SLC15
Intelligent Camera
FZ-SC
Monitor Cable
FZ-VM
Camera Cable
FZ-VS
Model
Name
Two-camera Controller
Four-camera Controller
Controllers
Two-camera Controller
Box-type Controller
Four-camera Controller
PNP
FZ-305
NPN
FZ-300-10
PNP
FZ-305-10
NPN
FZ-350
PNP
FZ-355
NPN
FZ-350-10
Cables
---
Wide field of vision
FZ-SLC100
Narrow field of vision
FZ-SLC15
Intelligent Camera
Intelligent Cameras
With touch pen
FZ-355-10
PNP
Cameras
Remarks
FZ-300
NPN
Controller with LCD
Real Color Sensing
■ Ordering Information
Camera, zoom lens, and Intelligent Lighting
Digital Color Camera
FZ-SC
CCTV lens required.
Camera Cable
FZ-VS
Cable length: 2 m, 5 m, and 10 m
Cable length: 2 m, 5 m, and 10 m
FZ-VSB
FZ-VSL
Cable length: 2 m
Parallel Cable
FZ-VP
Cable length: 2 m and 5 m
Monitor Cable
FZ-VM
For Box-type Controllers: Cable length: 2 m and 5 m
LCD Monitor
FZ-M08
For Box-type Controllers
USB Memory
FZ-MEM256
Capacity: 256 MB
VESA Attachment
FZ-VESA
For installation of Controller with LCD
Desktop Stand
FZ-DS
For installation of Controller with LCD
Mouse
---
Recommended products (optical mouse)
Microsoft Corporation: Compact Optical Mouse U81 Series
Peripheral
devices
CCTV Lens
3Z4S-LE Series
External Lighting
3Z4S-LT Series
Strobe Controller (for FZ Series Vision Sensors)
Manufactured by
MORITEX Corporation
3Z4S-LT MLEK-C100E1TS
---
Required to control external lighting from a Controller.
Integrated Controller
and LCD
Crooked-proof Camera Cable
Right-angle Camera Cable (See note.)
Note: The Right-angle Cable has an L-shaped connector on the Camera side.
Controllers
FZ-300
FZ-305
FZ-300-10
FZ-305-10
FZ-355
FZ-350
No. of Cameras
2
4
2
4
640 × 480 (H × V)
Processing resolution
No. of scenes
32
Backup memory
36 screens
Touch pen, mouse, etc.
Operation
Mouse or similar device
Create series of processing steps by editing the flowchart (Help messages provided).
Settings
RS-232C/422A: 1 channel
Ethernet 100Base-TX/10Base-T
10 inputs, 22 outputs (excluding common terminals)
Parallel I/O
NPN
PNP
NPN
PNP
PNP
NPN
Integrated Controller and LCD
12.1 inch TFT color LCD
Resolution: XGA 1,024 x 768 dots
Monitor interface
PNP
NPN
Analog RGB video output, 1 channel
4 channels (supports USB 1.1 and 2.0)
USB interface
20.4 to 26.4 V DC
Power supply voltage
Current consumption (See note.)
Connected to FZ-SLC
5 A max.
7.5 A max.
5 A max.
7.5 A max.
Current consumption (See note.)
Connected to FZ-SC
3.7 A max.
4.9 A max.
3.7 A max.
4.9 A max.
Operating: 0 to 50°C, Storage: −20 to 65°C (with no icing or condensation)
Ambient temperature range
Accessories
Approx. 3.2 kg
Approx. 3.4 kg
Approx. 1.8 kg
Approx. 1.9 kg
Please Read First, Instruction Manual (Setup)
Touch pen (one, inside the front panel), Please Read First, Instruction Manual (Setup), 6 mounting brackets
Note: The current consumptions are for when the maximum number of Cameras are connected.
Camera
LCD Monitor
FZ-SLC100
FZ-SC
FZ-SLC15
Interline transfer reading all pixels
Image elements
FZ-M08
Size
8.4 inches
Liquid crystal color TFT
Pixel size
7.4 × 7.4 (μm)
Type
Shutter function
Electronic shutter; select from 8 shutter speeds (1/120 to 1/20,000 s) using menu.
Resolution
1,024 × 768 dots
Partial function (partial image capture function)
12 to 480 lines
Input signal
Analog RGB video input, 1 channel
Frame rate (image read time)
80 fps (12.5 ms)
Visual field
13 to 100 mm (See note 1.)
Camera distance
70 to 190 mm
LED class (See note 2.) (lighting)
2.9 to 14.9 mm (See note 1.)
35 to 55 mm (See note 1.)
Select CCTV lens to suit the field
of vision and camera distance.
---
Class 2
Ambient temperature range
Operating: 0 to 50°C, storage: −25 to 60°C (with no icing or condensation)
Ambient humidity range
Operating and storage: 35% to 85% (with no condensation)
Weight
Accessories
Approx. 670 g
Approx. 700 g
Instruction Sheet and hexagonal wrench Instruction Sheet and hexagonal wrench
Power supply voltage
21.6 to 26.4 V DC
Current consumption
Approx. 0.7 A max.
Ambient
temperature
range
Operating: 0 to 50°C, storage: −20 to 60°C
(with no icing or condensation)
Ambient humidity
range
Operating and storage: 20% to 85%
(with no icing or condensation)
Approx. 55 g
Weight
Approx. 1.2 kg
Instruction Sheet
Accessories
Instruction Sheet and 4 mounting brackets
Specifications
Operating and storage: 35% to 85% (with no condensation)
Ambient humidity range
Weight
Applications and
Measurement Items
Serial communications
Network communications
I/O type
FZ-355-10
FZ-350-10
FZ-SLC100, FZ-SLC15, FZ-SC
Connected Camera
Fits On-site Needs
■ Ratings and Specifications
Note 1: Tolerance: ±5% max.
Note 2: Applicable standards: IEC 60825-1: 1993 + A1: 1997, EN 60825-1: 1994 + A1: 2002 + A2: 2001
15
■ External Dimensions (mm)
■ Controller with LCD
FZ-300, FZ-305 (2-camera type)
120
120
20
Four, M3 mounting holes
with a depth of 6 mm
12.8 (28.4) 10
7
68
(163.5)
246
110
260
33
(7)
130
83
308
296
6
120
(6)
20
120
FZ-300-10, FZ-305-10 (4-camera type)
120
120
20
Four, M3 mounting holes
with a depth of 6 mm
12.8 (28.4)10
(7)
130
33
7
68
(163.5)
246
110
260
+
-
308
104
120
■ Box-shaped Controller
FZ-350, FZ-355 (2-camera type)
FZ-350-10, FZ-355-10 (4-camera type)
(6)
296
6
20
120
90
165
Note: The FZ-350 (2-camera type) has only the
two camera connectors on the right.
17
80
(68)
(68)
80
17
Four, M4 mounting holes
with a depth of 6 mm
Four, M4 mounting holes
with a depth of 6 mm
54
64
18
13
4-dia., 20
26
16
100
(39)
(15.45)
8
11
11
33
126
126
190
Four, M4 mounting holes
with a depth of 6 mm
(6.8)
11.5
Real Color Sensing
■ External Dimensions (mm)
■ Intelligent Camera
FZ-SLC15 (Narrow field of vision model)
68
68
■ Intelligent Camera
FZ-SLC100 (Wide field of vision model)
73.2
87.4
27.5 37.5
47.5
28
(47)
(5.2)
2
(5.2)
33
78.2
92.4
20±0.1
10±0.1
10±0.1
Mountable plate thickness:
1.6 to 5.0 mm
(6)
Three, M2 mounting holes
with a depth of 3.0 mm
(103.5)
40
75
Four, M4
26
12
(85.5)
(38)
(12.5)
(129.4)
171
10.5
28
14
(31.5)
Fits On-site Needs
46.3
40
14.5
22
28
1/4-20UNC with a depth of 8.0 mm
■ LCD Monitor
FZ-M08
22
12
14.5
Two, M4 mounting holes with a depth of 8.0 mm
58
75
■ Digital Color Camera
FZ-SC
Integrated Controller
and LCD
7.4
Two, M4 mounting holes with a depth of 8.0 mm
1/4-20UNC with a depth of 8.0 mm
53
(47)
20±0.1
161
(173.4)
(185)
2
28
95
27.5 37.5
50
100
28
40
106.5
90
40
Intelligent Camera
101.5
100
C mount
6.5
24
Three, M2 mounting holes
with a depth of 3.0 mm
(130)
(172)
230
(90)
9.5±0.1 9.5±0.1
33.5
10.5
5.5
220
Applications and
Measurement Items
Two, M4 mounting holes
with a depth of 5.5 mm
1/4-20UNC
with a depth of 5.5 mm
■ Optical Graph
Intelligent Camera FZ-SLC100
Intelligent Camera FZ-SLC15
60
Specifications
55
Camera distance (mm)
Camera distance (mm)
190
70
0
0
13
30
50
100
Field of vision (mm)
35
30
0
2.9 3.1
13.8 14.9
Field of vision (mm)
Note 1: For information on how to use Intelligent Cameras, refer to the user's manual packed with the product.
2: The lengths of the fields of vision given in the optical graphs are the lengths of the Y axis.
Y
Field of vision
X
17
■ CCTV Lenses
■ Optical Graph
If using the FZ-SC Camera (Camera only), refer to the optical graph below and select the lens and Extension Tubes.
The lens to be selected will depend on the size of the measurement object and the camera distance.
Camera distance A (mm)
Camera Only FZ-SC
10000
■ Meaning of Optical Graph
3Z4S-LE
t0
t1.5
t0 t0
1000
t0
t0
t2
t0.
0.5
t1 t0.
0.5
1.5
t1.
t1 t0.
t2
0.5
t1.
1.5
t2
t1
t0.
0.5
t1.5
t5
Extension Tube
thickness:
[email protected] (mm)
t0
t: Extension
Tube length
40
10
Camera
t0
t10
t15
t20
t5
t35 t30t25
t10
t15
t40
t5
t20
t2
t1
t25
t10
t0.
0.5
t15
t20
t1.
1.5
100
t5
t1
t2
t0.5
t10
t1.5 t1
4
The X axis of the graph shows
the field of vision L (mm), and
the Y axis shows the camera
distance A (mm).
ML-0614
ML-0813
ML-1214
ML-1614
ML-2514
ML-3519
ML-5018
100
1000
Lens
The value "t0" indicates
applications where an
Extension Tube is not
needed and the value "t5"
indicates applications
where a 5-mm Extension
Tube is used.
Camera
distance
A (mm)
Camera distance A (mm)
Field of vision L (mm)
Field of vision (mm)
10000
3Z4S-LE
t0
ML-7527
ML-10035
t2
t0
t5
t10
t40 t35 t30
t45
t50
t60
1000
t20 t15
t25
t2
t5
t10
t15
t25 t20
t50
t45 t40 t35 t30
200
2
10
100
1000
Field of vision L (mm)
■ CCTV Lenses
CCTV Lens
3Z4S-LE
ML-0614
Model
3Z4S-LE
ML-0813
3Z4S-LE
ML-1214
3Z4S-LE
ML-1614
3Z4S-LE
ML-2514
3Z4S-LE
ML-3519
3Z4S-LE
ML-5018
3Z4S-LE
ML-7527
3Z4S-LE
ML-10035
Appearance
30 dia.
30
30 dia.
30 dia.
34.5
34.5
30 dia.
24.5
30 dia.
24.5
30 dia.
29
32 dia.
37
32 dia.
42.5
32 dia.
43.9
Focal length
Brightness
6 mm
F1.4
8 mm
F1.3
12 mm
F1.4
16 mm
F1.4
25 mm
F1.4
35 mm
F1.9
50 mm
F1.8
75 mm
F2.7
100 mm
F3.5
Filter size
M27
P0.5
M25.5
P0.5
M27
P0.5
M27
P0.5
M27
P0.5
M27
P0.5
M30.5
P0.5
M30.5
P0.5
M30.5
P0.5
■ Extension Tubes
Model
Contents
Thickness: 40 mm
20 mm
10 mm
5 mm 2.0 mm 1.0 mm 0.5 mm
Set of 7 tubes
3Z4S-LE ML-EXR
Maximum outer diameter: 30 mm dia.
■ Precautions
Do not use the 0.5-mm, 1.0-mm, and 2.0-mm Extension Tubes attached to each other. Since these Extension Tubes are placed over the threaded section
of the Lens or other Extension Tube, the connection may loosen when more than one 0.5-mm, 1.0-mm or 2.0-mm Extension Tube are used together.
Reinforcement may be required for combinations of Extension Tubes exceeding 30 mm if the Camera is subject to vibration.
18
This document provides information mainly for selecting suitable models. Please read the Instruction Sheet carefully for information that the user must
understand and accept before purchase, including information on warranty, limitations of liability, and precautions.
Note: Do not use this document to operate the Unit.
OMRON Corporation
Industrial Automation Company
Sensing Devices Division H.Q..
Application Sensors Division
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel: (81)75-344-7068/Fax: (81)75-344-7107
OMRON ELECTRONICS LLC
1 East Commerce Drive, Schaumburg,
IL 60173 U.S.A.
Tel: (1)847-843-7900/Fax: (1)847-843-8568
Regional Headquarters
OMRON ASIA PACIFIC PTE. LTD.
83 Clemenceau Avenue,
#11-01, UE Square,
239920 Singapore
Tel: (65)6835-3011/Fax: (65)6835-2711
OMRON EUROPE B.V.
Sensor Business Unit,
Carl-Benz-Str. 4 D-71154 Nufringen,
Germany
Tel: (49)7032-811-0/Fax: (49)7032-811-199
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Road (M),
Shanghai, 200120 China
Tel: (86)21-5037-2222/Fax: (86)21-5037-2200
Authorized Distributor:
Note: Specifications subject to change without notice.
Cat. No. Q149-E1-01B
Printed in Japan
0407-1.5M (0806) (O)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement