2002 Catalog.qxd
2002-3
2002-3 Revision
Revision VII
VII
In
In The
The Race
Race For
For Quality...
Quality... There
There is
is No
No Finish
Finish Line!
Line!
the
the
One
top
One SStop
Chas
ssssis
ss SShop
hop
Chas
is
M
O
S
C
O
W
M
I
L
L
S
,
M
USD
$3.00
O
.
R A C E
O
C A R S
Now!
State-o
of-tthe-A
Art
Chassis Shop!
n August 16, 2000 Jerry Bickel Race Cars moved
into a new 20,000 square foot facility. This in
house designed building was set up to streamline
construction while maintaining quality control of Race
Cars and Components.
The offices are equipped with the latest in accounting, inventory control, job costing, shipping, networked
computer equipment. This enables us to keep current
pertinent information and data concerning each of our
departments at our fingertips. We have installed a new
phone system featuring a multi line service and a voice
mail message system assuring that no call is missed or
un-answered. After hours calls are sent to our company
directory allowing messages to be left 24 hours a day. All
voice mail messages are returned as quickly as possible.
The multi floor Parts
Department is chucked full of
all the components listed in the
catalog and many other items
necessary in the construction
of race car chassis’s. This
huge inventory keeps back
orders to a minimum and
allows same day shipments on
most items. Your order can be
tracked from the time of placement to delivery with our computer data processing equipment. Our sales staff offers
years of experience in performance sales to insure that
you receive the right component at the most competitive
price available. No matter how large or small your order
is, it will receive the same attention and concern from our
staff.
A temperature controlled manufacturing area features chassis construction surface plates, new design
tube bending equipment, ultimate tube notchers, multi
heliarc welding stations plumbed to a external filled
argon supply system, three multi stage compressors with
individual air dryer's at every outlet, dual sheetmetal
housing fixtures and tooling, machine lathes, Bridgeport
mills, power and
hand slip rollers,
sheetmetal brakes,
deep throat bead
roller, power sheer,
stomp
sheers,
component manufacturing surface
plates, vertical and horizontal band saws, parts tumbler, mock-up transmission and engine rack, tubing
and sheetmetal racks, body template racks and all
hand and air tools necessary in the construction and
assembly of race cars and related components. We utilize the assembly line method in our race car construction, allowing the fabricators to perform the same specialized job on every chassis.
To insure the ultimate in paint and body, we
installed a temperature controlled paint booth. Custom
designed for race car
needs, this unit produces dirt free baked
on paint finishes. Hitech composite materials are bonded
together, repaired and
body worked with aircraft epxoy’s and carbonfiber materials.
We use the latest PPG custom and hi-performance
paint and body materials. Two part epoxy systems are
used, then baked on to give the most durable, long
lasting finish possible.
To assure customer service and
satisfaction,
we
committed
to
NHRA as a major
sponsor. Look for
the JBRC race
support motorhome at most national events. We carry
a large inventory of small parts sometimes needed to
keep your car competitive and safe
at the track. Our on board shock
dyno service is available
to answer those urgent
track shock problems. Two
on-board
computers
equipped with the latest data
programs provide information
for 4-link and chassis questions. Our staff is available
to help with any track side assistance needed.
This investment in facility and equipment represents our commitment to customer satisfaction. We will
continue work as hard as necessary to meet your
expectations. We normally work half days (7am to
7pm), but when necessary we go to full days. What
ever it takes to keep JBRC the “ONE STOP CHASSIS
SHOP” leader.
Table of Contents
Apparel
Batteries, Mounts, Components
Bellhousing and Accessories
Body Mounts and Accessories
Bolts, NAS-Aircraft
Blueprints, Chassis
Bottle Mounts
Brake Kits
Brake System Components
Chassis Kits
Chassis Paint
Chassis Tuning Manual, Computer Programs
Chromoly Tubing and Plate
Clevis, Weld-in
Clutch Accessories, Tools
Cooling System Components
CO² Bottles, Regulators
Dashboards
Data Recorders and Accessories
Dimension Charts
Drive Shafts and Yokes
Driveshaft Loop, Enclosures
DZUS Fasteners, Tabs and Accessories
Electrical
E-Z Lift Jack Systems
Fastener Hardware
Fire Suppression Systems
Fuel Cells and Accessories
Fuel Pumps,Regulators, Filters
Gauges
Gears, Richmond & Motive
Headers, Header Kits and Accessories
Hood Scoops and Accessories
Ignition
Linkage, Throttle, Clutch, Brake
Master Cylinders
Hours:
Page
Back Cover
36
31,32
50,51,52
73
5
48,49
24,25
17,18,25
4,5
60
3
78
76
30,31
34,35
48
56
40
80
29
28
74,75
36,37,38,39
68
73
63
41,42
43
18,43,57
9
46
53,54
72
16,31
17
Morse Cables and Accessories
Motor Plates, Mid Plates, Mounts
Order Form
Parachutes, Mounts, Accessories
Pedal Components
Plumbing Supplies, Tools
Push/Pull Pins
Quick Disconnects (Oil, Water)
Racetech Home Study Course
Rear End Housings and Components
Rear Suspension
Rod Ends, Aurora
Safety Equipment, Seat Belts
Scales
Seats, Mounts and Accessories
Shocks, Tools and Accessories
Springs, Coilover
Steering Components
Starters, Tilton
Struts, Mounts and Accessories
Tabs and Hardware
Tires and Accessories
Tools
Thirdmembers
Throwout Bearings
Transmission Coolers
Transmission Mounts
Tube Adapters
Water Pumps and Accessories
Weight and Mounts
Wheelie Bars and Components
Wheels
Window Nets and Mounts
Windows and Accessories
Wing Kits
Wheel Tubs
Page
65
26,27
79
64,65
15,17
44,45,66,71
73
66
2
6,7
10,11
21
62,63
66
58
12,13,14
14
19,20
39
22,23
77
57
68,69,70,71
9
30,312
49
27
76
35
65
32,33
33
62
59,60,61
55
56
Terms and Conditions
Parts Department hours are 8:00 am to 6:00 pm, Monday through Friday, and 9:00 am to 12:00 pm on Saturday, Central time.
Of course, our fax line is available 7 days a week, 24 hours a day. Office telephone hours are 8:00 am to 5:00 pm, Monday through
Friday, Central time. Technical Assistance is available from 1:00 pm to 4:00 pm, Monday through Friday, Saturday’s by chance. During
racing season, technical phones are closed during NHRA and IHRA National Events. Technical assistance can be obtained in person
at the event.
Pricing: We regret prices listed may change periodically due to changes in cost of materials and/or components. If a price has changed
from the catalog listed price, you will be notified at time of ordering.
Ordering: All orders will be shipped same day, if possible, with the exception of custom orders and back ordered items. UPS orders
will be shipped C.O.D., cashier’s check or money order only, unless prepaid. Truck line items must be prepaid prior to shipping.
No C.O.D. truck orders.
Returns: Merchandise will not be accepted for return without an RGA number. RGA numbers can be obtained through our Parts
department. Merchandise must be returned in new, undamaged condition (no dents, holes, etc.). Items must be packaged properly
and shipped freight prepaid. No returns on special order or custom order items. A 15% re-stocking charge applies on all returns.
Customer Satisfaction: Jerry Bickel Race Cars, Inc. is committed to quality. Customer satisfaction is important to us. Due to the construction aspect of our business, many parts are not attractive when in kit form, i.e., no paint or plating, etc. If a component is received
and you are not entirely satisfied, call us. Let us continue to live up to the quality that is synonymous with Jerry Bickel Race Cars,
Inc. We value your comments.
Warranties: There is no warranty stated or implied due to unusual stresses placed on race cars and components and because we have no control over
how they are maintained, installed and used. Due to the hazards involved with racing, Jerry Bickel Race Cars, Inc. accepts no liability for failures of
racing components or accessories manufactured or sold by Jerry Bickel Race Cars, Inc. and Customer accepts all risks involved with racing and hazards thereof.
retneC noitamrofnI
Information Center
Learn how to
build a stateof-the-art
race car in
your
own
home or shop
at your own
pace! Over
1,000 pages
and years of
professional
c h a s s i s
building
experience in
five modules.
t
s
e
Loews Ever
Pric
Module A - Introduction
Complete Student Home
196 pages on suspension geometry, theory, metallurgy, blueprint reading, fasteners, etc.
Study Course
Module B - Related Math
RT-1000
$625.00
187 pages on fractions, decimals, fastener spacing, rear end width calculating, etc.
All 5 books (Mod A thru E)
Module C - Tools & Equipment
Racer Edition
233 pages on measurements, tools, hand tools, power tools, welding equipment, etc.
RT-1010
$375.00
Module D - Chassis Fabrication
(Mod A,D and E)
212 pages on cutting, bending and notching tubing, chassis construction, suspension, engine
and trans mounts
Module E - Body & Interior
256 pages on interior fabrication, body mounting, accessory mounts, initial settings, etc.
Individual Modules
$150.00
Jerry Bickel’s Complete Guide to
C
h
a
s
s
i
s
P
e
r
f
o
r
m
a
n
c
e
“ The Chilton Manual Of Drag Racing”
This information packed book contains the knowledge that Jerry has
accumulated in his 25 years of drag
racing success. Learn how drag
slicks work and how to adjust 4-link
suspensions and weight transfer for
any track conditions. What causes
tire shake? How do I eliminate it? No
more
mysteries
about
shock
absorbers and pre-load settings. It’s
all between the covers of his newest
release in a whole new era of drag
racing knowledge. Here’s what’s
included:
2
• Race Car Operation - Covers the basics of drag racing
procedures, timing systems and the forces involved in a drag
chassis.
• Suspension Geometry - Suspension geometry, alignment, spring rates, center of gravity, instant center, torque
arm suspensions
• Pre-Race Chassis Setup - How to correct bump steer
problems, initial front & rear alignment, starting weight,
instant center and pre-load settings.
• Race Day Adjustments - Towing protection, tire inflation,
picking the groove, adjusting for changing track conditions
• Troubleshooting Guide - What to do when your car doesn’t hook or go straight, loses traction on bumps, shakes or
“In The Race For Quality, There is No Finish Line”
4-LINK Wizard™
• Chassis Manual $99.00
• Chassis Wizard $89.00
• 4-Link Wizard $99.00
Chassis Wizard™
A powerful computer program that can help you analyze and tune your drag race car for maximum performance. Simply enter the data for your car and apply
the full number-crunching power of your PC to find out
what will happen at launch. Load transfer, projected 60
ft. times, g-force -- it’s all there for you. JBRC uses the
Chassis Wizard™ to help determine the best engine
locations for Pro cars and trucks.
This program is a great companion to Jerry Bickel’s
Complete Guide to Chassis Performance. Buy both
and gain a wealth of information about the way we set
up and adjust our cars.
Complete Performance
All 3 for $259.00
Tuning Special
3
The One Stop Chassis Shop
24-hour FAX (636) 356-4667 http:jerrybickel.com
(636) 356-4727
retneC noitamrofnI
The days of plotting your 4-link on the
garage floor or on the side wall of your
trailer are over. You can now use your PC
to locate
all possible
IC’s for
any 4-link.
The program generates a
plot of up
to 625
instant
centers.
Use the mouse to move the 4-link bars on
the screen. The computer instantly calculates you IC. Generates a list of every possible IC location for your brackets. If you
change your ride height, you enter one
dimension to update all IC locations.
stiK sissahC
NEW KITS FOR 2002-3
•
•
•
•
•
•
2001-2 Grand/Am
2001-2 Cavalier
2001-2 Mustang - Cougar
1963 Corvette Roadster
1934 Chevrolet Roadster
1997-02 Dodge Viper
Chassis Kits
Front 4-Link Brackets
Funny Car Cage
Upper Strut Mount
Rear Upper Shock Mounts
Wishbone Mount
Assembly Instructions
Rack & Pinion Mount
Lower Strut Mount
Integral Drive Shaft Loop
Choose the same chassis professionals worldwide use. The JBRC Pro
chassis kit is available in welded and unwelded form. Pro chassis kits are constructed of 4130
moly material and designed to meet the latest SFI specifications.
Accept no imitations.
WHY IS THE JBRC CHASSIS A BETTER CHASSIS? Because our chassis are built on surface
plates utilizing the exact fixtures used in construction of all JBRC complete cars and assembled by
experienced craftsmen. Welded chassis are heliarc welded and include the following mounts and
bracketry:
• Rack and Pinion Mount
• Upper Strut Mounts
• Lower Strut Mounts
• Funny Car Cage
• Intregal Drive Shaft Loop
• Front 4-Link Brackets
• Rear Upper Shock Mounts
• Wishbone Mount
• JBRC Pro chassis kits come in all popular body styles, but should your application be one we do
not have in our library of drawings, we will custom design the chassis if a body is provided.
• Your chassis will be custom designed for the class of competition you choose to compete in,
whether it be Super Gas, Super Comp, Competition Eliminator, Pro Stock or Pro Modified.
• Unwelded chassis kits are complete with the same mounts and bracketry as the welded version
and come with a working blue print showing 3 different views, making assembly easier for the doit-yourself chassis builder. Our working blue print is designed using CAD technology and is the
exact blue print used in construction of the welded chassis and complete cars built in our chassis
shop. All components necessary for completion of your project can be purchased through our
Parts Department and are of the same quality, construction and design of those used in-house.
Welded Chassis Kit - JBRC1034 - $5,900.00
Unwelded Chassis Kit - JBRC1033 - $2,200.00
Welded Truck Chassis Kit - JBRC1034T - $6,500.00
Unwelded Truck Chassis Kit - JBRC1033T - $2,500.00
JBRC Chassis Blueprint only - JBRC1000 - $500.00
4
“In The Race For Quality, There is No Finish Line”
Why a JBRC Chassis Kit?
•Motor Plate
•Mid Plate
•Block Protector
•Transmission Mount
•Steering Column
•Steering Wheel
•Rack and Pinion
•Tie Rod Kit
•Rear End Housing
•4-Link Bars
•4-Link Rod Ends
•4-Link Bolt Kit
•Wishbone Track Locator
•Drive Shaft Loop
•Radiator
•Radiator Mount
•Rear Shocks
•Axles, Bearings and Wheel Studs
•Rear Brake Kit
•Front Strut and Braking System
•Battery Mounts
•Fuel Cell
•Fuel Cell Mount
•Pedal Assembly
•Master Cylinder Mount
•Seat
•Seat Mount
•Wheelie Bars
•Third Members
•Brake Line Plumbing
•Fire Bottle Mount
•On/Off Switch Mount
•Electrical Components
•Body Mounts
•Door Hardware & Mts
•Windows & Accessories
•Scoops & Components
•Chute Mount
•Drive Shaft
To Complete your chassis choose from one of the following Stage Kits
STAGE #1 - $3,295.00
•4-Link Kit
•4-Link Rod End Kit
•4-Link Bolt Kit
•Wishbone Kit
•Wishbone Housing Mount Kit
•KONI Double Adj Rear Shocks
•Rear Springs
•Rear Lower Shock Mounts
•Shock Bolt Kit
•Pro Driveshaft Loop Kit
•Ultra Light Pro Pedal Assembly Kit
•Gas Pedal Mount Kit
•Master Cylinder Mount Kit
•Pro Steering Column Kit
•Rack & Pinion Steering Unit
•Tie Rod Kit
STAGE #2 - $6,295.00
•All STAGE #1 Components +
•9” Ford Custom Rear End
Housing
•Carbon Pan Seat Kit
•Motor Plate Mount Kit
•JBRC 6061T-6 Motor Plate
•Mid Plate Mount Kit
•JBRC 6061T-6 Mid Plate
•Transmission Mount Kit
STAGE #5 - $12,595.00
STAGE #3 - $7,295.00
•All STAGE #1 & #3 Components +
•JBRC Strut Package (Includes:
Complete Front Brake Kit, Lower
Control Arms, Rod Ends, Springs
•Axles, Bearings & Drive Studs
(40 Spline MARK WILLIAMS or
STRANGE with Lt Weight Option)
•LAMB or MW Rear Brake Kit
•Master Cylinder
•All STAGE #1 Components +
•9” Ford Custom Sheet Metal
Rear End Housing
•Carbon Pan Seat
•Motor Plate Mount Kit
•JBRC 6061T-6 Motor Plate
•Mid Plate Mount Kit
•JBRC 6061T-6 Mid Plate
•Transmission Mount Kit
STAGE #4 - $9,295.00
•All STAGE #1 & #2
Components +
•STRANGE Strut Package
(Includes: Complete Front
Brake Kit, Lower Control
Arms, Rod Ends, Springs
•Axles, Bearings & Drive
Studs (40 Spline MARK
WILLIAMS or STRANGE)
•Rear Brake Kit (STRANGE
or WILWOOD)
•Master Cylinder
JBRC Blueprint
Actual blueprint used in all chassis
kits. Comes with tubing component list, all dimensions and tubing
specifications. Meets latest SFI
specifications.
JBRC1000 - $500.00
NOTE: Stage Kits do
not include chassis
The One Stop Chassis Shop
24-hour FAX (636) 356-4667 http:jerrybickel.com
(636) 356-4727
5
segatS tiK sissahC
A deciding factor in purchasing a chassis kit is which brand components to use that will fit your chassis and give you the
best performance advantage over your competition. We make it easy for you to equip your chassis with components in
kit form, or installed by our chassis shop, giving your home-built race car the added advantage of the Professional’s
Choice components manufactured by Jerry Bickel Race Cars, Inc. We have made a checklist for your convenience.
Most items listed can be found in the pages of this catalog, however, those that are not can still be ordered through
JBRC as we are stocking warehouse distributors for most manufacturers. Any component you might need to complete
your project can be obtained with one phone call -- The one-call chassis shop - Jerry Bickel Race Cars, Inc.!
sgnisuoH dnE raeR motsuC
Custom Rear End Housings
Fabricated Rear End Housings
•Constructed completely of 4130 moly steel.
•Each housing is built on a machine-ground surface plate, keeping the housing
dimensionally true during fabrication.
•3-1/4” diameter .250 wall 4130 tubes run inboard and attach to an inner bulkhead, completely welded inside and out.
•Laser cut face plate and backing ring supports the folded sheet metal case and
brace assembly.
•360 degree 4-link brackets are welded to the tubes and also support the case
assembly, thus adding four more bulkhead supports.
•Unique design eliminates flex during acceleration and also torsional and vertical
flex caused by tire shake, making this the strongest housing on the planet.
•Housings are equipped with wishbone mount (upper or lower) , shock mounts,
tie down loops and wheelie bar mounts and include 3rd member studs, large
diameter fill/inspection cap, housing vent, gasket and drain plug.
•Bearing ends are installed using a special dimensionally accurate fixture manufactured by Mark Williams Enterprises
exclusively for this project. By using this fixture, we are assured vertical and horizontal alignment with zero tolerance.
•All housings are completely welded and machined with the final step being the installation of the bearing.
•For added strength, we recommend our full-floater housing. By using a floater housing, the axles never see any bending loads, only torsional loading. The bending loads are carried by the spindle and housing.
•Housing 4-link bracketry is compatible with most front 4-link bracket designs.
•Internal oil baffles direct fluid around ring gear improving Ring and Pinion life
•Available in a variety of 4-link center line dimensions: 17” minimum to 21” maximum.
NEW!
Internal
Oil Baffles
Fabricated 9” Housing
JBRC1100 - $2,800.00
Fabricated Floater Housing
JBRC1101 - $3,100.00
JBRC1101
JBRC1100
YOU WANT MORE 4-LINK ADJUSTMENTS.........
JBRC now offers a 4-Link System with the most
intersect points on the planet. Features 1/2” holes
with 5/8” spacing. Rear bracket lower has 11 locations to choose from. Over 1584 possible intersect
locations. Laser cut for accuracy. Requires the use
of our exclusive special 3/4” x 1/2” HD rod ends and
NAS attaching hardware. Available on Sheetmetal
Housing and all JBRC chassis.
6
!
W
E
N
“In The Race For Quality, There is No Finish Line”
JBRC 1035A
Fabricate your own housing using this 9’”
Ford HD bare center. Large diameter
design allows 3 1/4” axle tubes to fit
inside for internal bulkheading. 23” wide,
Chemically Cleaned and ready for
Fabricating.
JBRC1035 - $1,600.00
Olds/Pontiac
Forged Housing Ends
58500
Olds/Pontiac (pr)........72.50
For all 3.150 O.D. bearings.
Symmetrical
For all 3.150 O.D. bearings. 1” long.
58550
Olds/Pontiac (pr)........90.00
58590
Olds/Pontiac (pr).......80.00
2.875”
For all 3.150 O.D. bearings. 1” long
with 3/8-24 threaded holes.
3/8”
Large Ford
2.375”
57820
Large Ford 1/2” (pr)....90.00
57830
Large Ford 1/2” (pr)....80.00
3/8”
or
1/2”
57850
Lincoln 3/8” (pr)..........80.00
Small Ford
57800
Symmetrical (pr)........80.00
58585
Symmetrical (pr)........80.00
58595
HD Symm.(pr).........175.00
58600
Standard GM (pr).......80.00
58560
Standard GM (pr).......90.00
58400
Full Size GM (pr)........80.00
58450
Full Size GM (pr)........96.00
53184
Mopar (pr)...............102.30
53185
Mopar (pr)...............114.40
53188
Mopar (pr).................90.00
53189
Mopar (pr)..................90.00
For all 3.150 O.D. bearings. 1” long
with 3/8-24 threaded holes.
For 58506 Timken unit bearings.
3.349"
3.00:
Small Ford (pr)...........90.00
57810
Small Ford (pr)...........90.00
New Style Ford
57860
3/8-16 THD
Standard GM
For all 3.150 O.D. bearings.
New Style Ford (pr)....96.00
2.437”
2.687”
Full Size GM
For all 3.150 O.D. bearings.
2.625”
3.375”
3/8”
8.8 Ford(pr).............114.00
For all 3.150 O.D. bearings. Includes
3/8” backing plate studs.
The 8.8 MW housing end utilizes the same 3.150”
O.D. axle bearing that is standard on Pro drag cars.
It’s possible to utilize the 45mm bore bearing for a
heavy-duty axle. Also as is the case with most MW
housing ends there is a provision for an inboard axle
seal.
For 58506 Timken unit bearings.
3/8”
For all 3.150 O.D. bearings.
58510
For Heavy Duty 58508 double row
ball bearings w/3.349 O.D. Existing
caliper mounts require modifications
for the larger bearing O.D.
3.00"
For all 3.150 O.D. bearings.
For 58506 Timken unit bearings.
8.8 Ford
58581
3.00"
3.125”
3.375”
2.00”
For all 3.150 O.D. bearings. 1” long.
3/8"
Lincoln 3/8” (pr)..........90.00
For 58506 Timken unit bearings.
2.00”
Symmetrical (pr).........80.00
58580D Symmetrical (pr)........80.00
For all 3.150 O.D. bearings.
For all 3.150 O.D. bearings.
3.500”
58580
For all 3.150 O.D. bearings.
For 58506 Timken unit bearings.
57840
Symmetrical (pr).......370.00
3.00"
3.150"
For 58506 Timken unit bearings.
2.375”
49580
For all 3.150 O.D. bearings. 1” long.
Titanium ends.
58500H Olds/Pontiac (pr)........72.50
3.500”
3.556”
JBRC1035A - $150.00
For 58506 Timken unit bearings.
3/8”
Mopar
For 56001 bearings. For seal.
3.18”
1.523”
For 56001 bearings, 1” long ends.
For 58506 Timken unit bearings.
The One Stop Chassis Shop
2.687”
3/8-
3.566”
24-hour FAX (636) 356-4667 http:jerrybickel.com
For all 3.150 O.D. bearings.
(636) 356-4727
7
sdnE gnisuoH degroF
The JBRC 9” Ford
Custom Rear End
JBRC1035
Housing utilizes stock
tubes replaced with 3” x
.250” wall 4130 tubes.
Housing is internally bulkheaded for maximum
strength. Complete with
JBRC 3/16” 4-Link
brackets, lower shock
mounts, upper and lower
wheelie bar tabs, wishbone mount, third member attachment studs, tie down loops, drain plug, fill cap
and a back brace which gives the housing added strength. This housing is built
for your specific width requirements with housing ends of your choice.
sdutS & sgniraeB ,selxA
MW “Hi-Torque” Axles
50100
Hi-Torque Axles, (pr) ..............................490.00
50100G
Gun Drilled Hi-Torque Axle, (pr) ............610.00
50500
Superlight Hi-Torque Axle (pr) ................645.00
Any length/flange/spline combination. (32 lbs*)
11/16” diameter gun drilled with round holes in flanges. (27 lbs*)
7/8” diameter gun drilled with pocket milled flanges. (19.9 lbs*)
50800
MW Drag Race
“HI-TORQUE”
Axles
Ultimate Hi-Torque Axle (pr) ....................875.00
300M material with 1 3/16” diameter gun drilled and
pocket milled flanges. (16.4 lbs*)
Drag Racing Axle Bearings
58504
Axle Bearings, 1-5/8” (pr)..........................85.00
58505
Axle Bearings, 45 mm (pr) ........................85.00
58508
Axle Bearings, 45 mm (pr) ......................222.00
Sealed bearings 3.150’’ O.D.,1.625” I.D.
Sealed bearings 3.150” O.D., 1.774” I.D.
Steel Drive Stud Kits
Double row sealed ball bearings 3.347” O.D., 1.774” I.D. For
58595 Heavy Duty Symmetrical ends.
Drive Stud Nuts & Washers
41527
51515
Titanium MW Base Nut* ..........................25.00
Stainless Steel Washer ..............................3.00
For use with MW aluminum base nut only, 3/16” thick.
51500
Drive Studs 11/16” dia. (complete set) ....95.00
51540
Drive Studs 11/16” dia. (complete set) ....95.00
A=3-1/2” B=1-3/16” C=1-1/2” D=13/16”
A=2-9/16” B=7/8” C=7/8” D=13/16”
51527
55012
51560
Drive Studs 11/16” dia. (complete set) ....95.00
Stainless MW Base Nut ............................12.00
A=4” B=1-3/16” C=2” D=13/16”
Steel Washer, 1/8” ....................................1.75 51580
Drive Studs 11/16” dia. (complete set) ....95.00
55013
Aluminum Washer, 3/8” ..............................1.75 51590
55014
Aluminum Washer, 9/16” ............................1.75 Drive Stud Sets with MW Integral Lug Nuts ..............180.00
55015
Aluminum Washer, 3/4” ..............................1.75
55016
55017
51520
Standard flange steel lug nut ......................1.60 55700
Full Floater Hub Assembly....................2298.00
Aluminum Washer ......................................1.75
40 spline axles, 5 x 5” bolt pattern.
Encapsulated MW Nut, 1/8” grip (ea) ......10.00 55750
Full Floater Hub Assembly....................1925.00
51521
Encapsulated MW Nut, 3/8” grip (ea) ......10.00
For use with standard flange lug nut, 1/8” thick.
A=2-7/8” B=7/8” C=1-3/16” D=13/16”
For use with MW base nut or standard nut, 3/8” thick.
A=3-13/16” B=7/8” C=1-3/4” D=13/16”
For use with MW base nut or standard nut, 9/16” thick.
Add “A” to Part Number (specify washer thickness).
Standard MW Floater Kits
For use with MW base nut or standard nut, 3/4” thick.
1/8” grip, threads relieved 1/8” on wheel side of nut
Drive Studs 11/16” dia. (complete set) ....95.00
40 spline axles, 5 x 5” bolt pattern. Less floater spindles.
For steel rotor kits with dual calipers per wheel, add
“DC” to the part number and 350.00 to kit prices.
3/8” grip, threads relieved 3/8” on wheel side of nut
55700 Floater
Assembly
55400
Carbon/Carbon Floater Kits
Full Floater Hub Assembly....................4850.00
40 spline axles, 5 x 5” bolt pattern.
55450
Full Floater Hub Assembly....................4480.00
40 spline axles, 5 x 5” bolt pattern. Less floater spindles.
For carbon rotor kits with dual calipers per wheel, add
“DC” to the part number and 850.00 to kit prices.
8
“In The Race For Quality, There is No Finish Line”
Third Members, Axles and Components
large inventory of
tom built to an individual’s specifications ranging from nodular iron casings with standard spools to
aluminum cases with titanium spools. Custom gear lightening is available. Professional assembly work performed by the same expert technicians that supply many of the third members to
Pro teams. With JBRC’ s in-house assembly capabilities, your custom third member can be
shipped, more often than not, within 24 hour.
Complete your rear end assembly in one stop!
Call For Options and Pricing
il
Gear Ohase of
O
C
R
c
r
TO e pu
FRnsEpoErter witthhirthd member
& Tra complete
3rd Member Transport Box
MAR57999 - $35.00
9” Ford Pro Gears
9” dia. ring gear, 1.875” dia. pinion stem, 35 spline pinion.
79-0043
79-0045
79-0079
990444
79-0080
79-0070
79-0086
79-0060
3.89
4.11
4.29
4.44
4.57
4.71
4.77
4.86
9” Ford Large Pinion 9310
9” Ford Large Pinion 9310
9” Ford Large Pinion 9310
9” Ford Large Pinion 9310
9” Ford Large Pinion 9310
9” Ford Large Pinion 9310
9” Ford Large Pinion 9310
9” Ford Large Pinion 9310
79-0066
79-0078
79-0017
79-0069
79-0005
79-0007
79-0019
79-0021
79-0023
79-0090
79-0054
4.86
5.00
5.14
5.29
5.43
5.67
5.83
6.00
6.20
6.30
6.50
9” Ford Pro Gear 9310
9” Ford Pro Gear 9310
9” Ford Pro Gear 9310
9” Ford Pro Gear 9310
9” Ford Pro Gear 9310
9” Ford Pro Gear 9310
9” Ford Pro Gear 9310
9” Ford Pro Gear 9310
9” Ford Pro Gear 9310
9” Ford Pro Gear 9310
9” Ford Pro Gear 9310
9” dia. ring gear, 1.313” dia. pinion stem, 28 spline pinion
Housing & 3rd Member
Components
MAR55-0040 - Torco Gear Oil - $7.95/qt
JBRC recommended, this oil has been race
proven and provides superior adhesive strength
and extreme anti-score protection. Safe for use
with spool, open and positraction differentials.
FEL2302 - Reusable 9” Gasket
$16.00
JB1001 - Drain Plug Weld Bung
4.50
JBRC-086 - Drain Plug, Teflon Gasket 2.50
MAR57913-10 - 3rd Member Stud Kit 29.00
JBRC-066 - 1/8 NPT Hsg Vent
4.50
JBRC-067 - 1/4 NPT Hsg Vent
5.00
JBRC offers a special ring gear lightening service for 9”
Ford, 12 bolt GM (4:88 to 6:20 ratio) and Dana 60
gears. This process is done on a CNC lathe with special tooling to produce a generous radius and smooth
finish. The result is a weight reduction of between 1/2
and 2-1/2 lbs.
LIGHTENED GEAR SETS
Motive 9” Ford Performance Gears
PART NO. RATIO TEETH
F990429SP
F990429BP
F990457SP
F990457BP
F990486SP
F990486BP
F990500SP
F990514SP
F990529SP
F990543SP
F990567SP
F990583SP
F990600SP
F990620SP
F990633SP
F990650SP
4.29
4.29
4.57
4.57
4.86
4.86
5.00
5.14
5.29
5.43
5.67
5.83
6.00
6.20
6.33
6.50
30-7
30-7
32-7
32-7
34-7
34-7
35-7
36-7
37-7
38-7
34-4
35-6
36-6
31-5
38-6
39-6
SP = SMALL PINION
AMOUNT
....................$320.00
......................330.00
......................320.00
......................330.00
......................320.00
......................330.00
......................320.00
......................320.00
......................320.00
......................320.00
......................320.00
......................320.00
......................320.00
......................320.00
......................320.00
......................320.00
BP = BIG PINION
Ring Gear Lightening Charge
The One Stop Chassis Shop
24-hour FAX (636) 356-4667 http:jerrybickel.com
9” Ford/12 Bolt/Dana 60, Ring Gears
LRG - $85.00
(636) 356-4727
9
stnenopmoC & srebmeM drihT
JBRC offers complete race-ready third members with your choice of components. We have a
Richmond, Mark Williams and Strange rear end components. Complete assemblies can be cus-
stnenopmoC noisnepsuS raeR
R e a r S u s p e n s i o n C o m4-Link
p oKitn e n t s
The JBRC 4-Link rear suspension kit is manufactured with
4130 moly 4-link brackets, 1-1/4” x .095 4130 tubing, weldin tube adapters utilizing Aurora XAM and XAB highstrength 4130 rod ends. JBRC 3/16” 4130 steel housing
brackets are laser cut for accuracy. Rear brackets feature
upper and lower wheelie bar tabs, lower shock mounts and
cross tube provisions. The front brackets feature the same
construction with 1/2” upper 4-Link adjustment holes for
increased 4-link adjustability. Includes JBRC 4-link bolt kit.
Upon request, a 4-link intersect file will be provided to be
used with our 4-LINK Wizard Program.
JBRC1106 - $895.00
Mild Steel 4-Link Kit
Designed to deliver Pro performance for the Sportsman
application. 3/16” hi-strength brackets have provisions for
a doubler tube and crossbrace tube located to intersect with
lower portion of housing which ties all 4 brackets to housing as one unit. Adjusting holes with 5/8” fasteners allow
for fine tuning. Seamless 1” x .156 wall tubing, direct
threaded with right and left threads with adjuster nut
installed, make up the 4-link bars. Aurora HD extra
strength shank rod ends, jam nuts and 4-link bolt kit.
JBRC1110 - $479.00
Shock & Wheelie Bar Mount - JBRC1109 - $39.00
4-Link Rod Ends
Pictured above with optional
Shock and Wheelie Bar Mount
4-Link Bolt Kit
Don’t compromise strength! We don’t. Our kit utilizes Aurora XAMand XAB heavy-duty shank, high strength alloy rod ends that have a Vastly superior to Grade 8 and AN bolts, these
load capacity of 40,572 lbs. Kit comes complete with rod ends and NAS fine threaded, dimple headed hex bolts have
a tensile strength of 160,000 psi and a shear
jam nuts.
strength of 95,000 psi. The grip length (unthreaded shank) shoulders the load of the rod end and
the threaded portion is used for the clamping
force. The
shouldered
area of the
bolt protects
the bracket
holes eliminating
thread to
4- XAM-8-3
4- XAM-10
4- XAM-10
bracket hole
3/4”RH, 1/2” Hole
3/4”RH, 5/8” Hole
3/4”RH, 5/8” Hole
contact. Kit
4- XAB-8-3
4- XAB-10
2- XAB-10
comes com3/4”LH, 1/2” Hole
3/4”LH, 5/8” Hole
3/4”LH, 5/8” Hole
plete with stainless AN washers and self-locking
4- 3/4” LH Jam Nuts high-temp lock nuts.
4- 3/4” LH Jam Nuts
2- XAB-8-3
4- 3/4” RH Jam Nuts
4- 3/4” RH Jam Nuts
3/4”LH, 1/2” Hole
4- 3/4” LH Jam Nuts
from
4- 3/4” RH Jam Nuts
JBRC1059
$379.00
Three Kits Available
JBRC1059A
$389.00
JBRC1059B
$399.00
JBRC1037
10
$119.00
“In The Race For Quality, There is No Finish Line”
Designed to bolt
to rear frame
rails, the sway
bar helps eliminate body roll
caused by long
and low 4-link
intersect points.
Nylon bushings
eliminate possibility of binding. For extreme service applications, a Heavy Duty
unit is available.
JBRC1038 - $275.00
JBRC1038HD - $325.00
Welded Sway Bar
JBRC1038HD
JBRC1038
Same as
our kit featured at
left, but
we’ve done
the welding
for you.
Same high
quality
technology
and materials.
JBRC1038W - price upon request
Wishbone
Wishbone Mounting Kit
The strongest rear end
The JBRC Wishbone Mounting Kits comes complete with all
centering device availhardware to install the wishbone on chassis or rear end housable.
The JBRC
ing.
Wishbone Kit is conB structed of highstrength 4130 tubing.
The unique design of
our wishbone helps
withstand bending durA
Chassis Mount
Welded Housing Mt. Unwelded Housing Mt.
ing the high stress
JBRC1040 - $85.00 JBRC1040K - $45.00 JBRC1114 - $49.00
loads that can be experienced during tire
shake. The JBRC Wishbone Kit comes complete with Aurora high-misOur bolt-on diagonal link provides a quick
alignment HXAM 5/8” shank, 1/2” hole rod ends and jam nuts. This
and easy method to positively center the
design is compatible for mounting on top or bottom of rear end housing.
rear suspension. The unique clevis design
Two standard sizes to choose from. Custom sizes available upon
takes the place of two lower 4-link or ladder
request.
bar attaching nuts. The diagonal link attachStandard
es to the clevis with Aurora 1/2” rod ends
Dimensions
Standard
A=
11
5/8”
B=
16
1/8”
Wide
equipped with hi-misalignment bushings to
Wide
A=
14”
B=
19
1/4”
make centering adjustments quick and easy.
Custom
Kit
comes
Dimensionally the same as our JBRC1039 kit. The slide tube has three
complete
bronze teflon impregnated replaceable bushings to insure a minimum
with 2
clearance for positive centering. The bushings are easily replaced
boltwhen worn by removing retaining snap rings. The inner slide shaft has
on clebeen machine ground for exact fit. Standard equipment on all JBRC
vis,
Pro cars.
right
and
left hand rod ends, tube adapters, 36”
Wide
length of 1”x.058” 4130 moly tubing and all
Custom
attaching hardware.
Bolt-On Diagonal Link Kit
- JBRC1039 - $295.00
- JBRC1039A - $295.00
- JBRC1039C - $350.00
Hi-Tech Wishbone
5/8
3/4
5/8
3/4
18 UNF JBRC1113 $109.00
16 UNF JBRC1113A 109.00
bolt on JBRC1113B 89.00
bolt on JBRC1113C 89.00
The One Stop Chassis Shop
24-hour FAX (636) 356-4667 http:jerrybickel.com
JBRC1039HT - $395.00
- JBRC1039HTA - $395.00
- JBRC1039HTC - $425.00
Hi-Tech wishbone components
shown at left
(636) 356-4727
11
stnenopmoC noisnepsuS raeR
Sway Bar
Kit
seirosseccA & skcohS
Shocks & Accessories
KONI Connection
As a distributor for KONI shock absorbers, we keep a wide
range of shocks in stock. Listed below are the most common
application for drag racing. If your application requires
something less universal, we can get it for you. Call for pricing, let us shock you!.
KONI Coil Over Shocks feature light-weight aluminum
body construction and come equipped with upper and
lower rod end mounting eye. Designed to use with 2-1/2”
I.D. coil spring.
8216 Series
Aluminum bodied, single
adjustable have rebound
adjustable dampers and
include an adjustable spring
platform.
$109.00 / ea
8212 Series
Aluminum,
double
adjustable have a
unique valving and
wide range of adjustment (both rebound
and
compression).
This series of KONI
dampers is adaptable
to satisfy most suspension requirements.
Part Number
8212-1121
8212-1126
8212-1123
8216-2027
8216-1906
8216-1907
8216-1908
SPA1
SPA1
SPA1
SPA1
SPA1
SPA1
Stroke
5.13”
6.00”
7.00”
2.52”
4.61”
5.44”
6.37”
Max L
15.88”
17.50”
19.50”
11.26”
15.59”
17.17”
19.13
1425.50.00.13
1038.50.02.54
1” O.D. 1/2” I.D.$14.00
1” O.D. snap rg
.60
Bump Rubbers
70.34.53.000.0 2 5/32” LONG
70.34.54.000.0 1 9/16” LONG
Electric Drag
70.29.01.228.0
71.29.11.048.0
71.29.13.003.0
15.29.04.0003.0
71.80.40.048.0
71.80.10.034.0
12
13.38
16.19
Upper sp seat 21.47
Lower sp seat 20.31
Locking ring
16.15
2.25 to 2.5 adp 2.19
Electric Box 349.13
Wire harness 75.00
Part Number
Stroke
Max L
80-2650 SPA1
5.08”
15.71”
Min L
10.63”
Tow Shocks
It’s no secret (or known fact) that your
racing shocks are damaged by the thousands of miles traveled during the year in
the trailer which causes continual
rebound and compression. JBRC along
with KONI has a solution! The 30 Series
Gas-Hydraulic Travel Shock System is a
direct bolt-on for the KONI single, double
adjustable or electric shock system.
Simply replace your race shocks at the
end of each event with the Travel Shock
System and experience the advantage of
saving wear-and-tear on your race
shocks while also saving hundreds of
dollars in rebuild and dyno testing costs.
Min L
10.75”
11.50”
12.50”
8.74”
10.98”
11.73”
12.76”
Koni Replacement Components
Bearings
80-2650 SPA1
The 80-2650 SPA1 is an economical steel bodied coil over
that is designed for use with 2
1/2” I.D. springs. These single
adjustable dampers are internally adjustable on rebound
with a fixed compression setting. The 80-2650 SPA1
mounting has a 1/2” I.D. rubber
mounting bushings.
8212
70.29.01.121.0
8212.29.129
8212.29.011
15.29.04.003.0
8216
KONJBRCTOW - $159.60 / ea
Upper sp seat $15.20
Lower sp seat 17.50
Locking ring
17.50
2.25 to 2.5 adp 2.19
70.29.01.119.0 Upper sp seat
70.29.11.129.0 Lower sp seat
71.29.13.011.0 Locking ring
80-2650
70.29.01.230.0
70.29.11.246.0
70.29.13.002.0
70.52.21.134.0
70.52.21.134.0
35.59
41.69
40.08
Upper sp seat 38.64
Lower sp seat 42.67
Locking ring
28.38
Rubber Bushing 35.84
Rubber bushing 12.00
“In The Race For Quality, There is No Finish Line”
offers in house
and track shock
dyno testing.
You can send in
your shocks to
be tested at our
shop. If any
repairs are
needed, we will
have KONI rebuild your
shocks and
components to
factory specifications. At the
events that our
motorhome
attends, we will
dyno your
shocks. Furnish
a dyno sheet
showing a graph
of your shocks
bump and rebound. We have a large supply of replacement shocks with us at every event.
KONI Electric Shocks
A remote activated switch instantaneously increases or
decreases rebound forces. Connection is made via a
micro-processor to an electric servo motor built into the
piston rod. 12 independent manual compression
adjustments available. Accepts 2-1/4” or 2-1/2” I.D.
springs.
12-2021
Electric Shock System
Air Operated Shock
Adjustment System
The air operated shock bump adjustment system keeps shocks stiff on the line, allowing the
car to “get up on the tire” and then shift to a soft
setting for the remainder of the run. When
installed on electric shocks, this can control the
bump and rebound adjustments of the shocks
during the run. Kit is installed at our shop on
your shocks and comes complete with air solenoid, delay timer, mounting bracket, air switch,
wiring, air lines and fittings.
JBRC1061 - $1,495.00
System at
left
Control
System at
right
Electric
Shock Box
Mount
Constructed of
.050 4130 moly,
this simple
bracket makes
mounting of the
electric control
box and delay timer a breeze. 4 anti-vibration
mounts secure bracket to mounting surface,
stainless hardware included.
JBRC3017 - $39.00
Voltage Reducer
Recommend for the power input to Koni
Electric Shocks installed on 16 volt systems.
High voltage can cause the shock box to go
into a pause mode and fail to shift the
shocks properly.
JBRC5534 - $6.00
The One Stop Chassis Shop
24-hour FAX (636) 356-4667 http:jerrybickel.com
(636) 356-4727
13
seirosseccA & skcohS
JBRC now
Shock Dyno
Coil Over Springs
Height
sgnirpS revO lioC
8”
8”
8”
9”
9”
9”
9”
9”
12”
12”
12”
12”
12”
12”
14”
14”
14”
14”
14”
14”
14”
14”
14”
14”
Diameter
Rate
2-3/8”
2-3/8”
2-3/8”
2-3/8”
2-3/8”
2-3/8”
2-3/8”
2-3/8”
2-1/2”
2-1/2”
2-1/2”
2-1/2”
2-1/2”
2-1/2”
2-1/2”
2-1/2”
2-1/2”
2-1/2”
2-1/2”
2-1/2”
2-1/2”
2-1/2”
2-1/2”
2-1/2”
175#
200#
250#
155#
175#
187#
200#
235#
85#
95#
110#
120#
140#
175#
75#
85#
95#
100#
110#
120#
130#
140#
155#
175#
Amount
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
Unit
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
EA
P/N
JBRC8-08-175
JBRC8-08-200
JBRC8-08-250
JBRC8-09-155
JBRC8-09-175
JBRC8-09-187
JBRC8-09-200
JBRC8-09-235
JBRC8-12-085
JBRC8-12-095
JBRC8-12-110
JBRC8-12-120
JBRC8-12-140
JBRC8-12-175
JBRC8-14-075
JBRC8-14-085
JBRC8-14-095
JBRC8-14-100
JBRC8-14-110
JBRC8-14-120
JBRC8-14-130
JBRC8-14-140
JBRC8-14-155
JBRC8-14-175
Shock Spuds
• .875 x 1.500 OAL
• 1/2 - 20 NF Thread
• Intregal .250 misalignment
JB1009 $12.50 ea
Upper & Lower Shock Bolt Kit
• NAS Shoulder Bolts
• Lock Washers
• Misalignment Bushings
JBRC1037B - $45.00
Bushing JBRC5860 - $2.00
Adjustable Lower Shock Mount
Designed to fit
popular coil over
shocks, this kit
provides
an
adjustable lower
mounting point.
Fits 3” OD axle
housing tube and allows 6” of height adjustment in 1”
increments. 1/4” housing brackets and 3/16” shock
brackets and all mounting hardware included.
JBRC1111 - $79.00
14
JBRC has taken the
technology acquired
from years of racing
experience to design
our coil-over springs. A
high grade of chrome
silicon steel is used on
each spring. This material will hold its designed
setting for an extended
period of time.They are
precision wound and
preset to exact specifications. We stock a
large supply of 2 3/8”
and 2 1/2” i.d. springs
in 8”, 9”, 12” and 14” lengths.
Our parts department has years of
experience in recommending the proper
spring rate for your application. All
JBRC springs are powercoated for long
lasting good looks and easy identification. Every spring is marked with its
rate.
Billet
Aluminum
Spring
Spacers
and
Bearings
1/2” JB1066 - $30.00 pr
1” JB1067 - $30.00 pr
Thrust Bearings JBRC1045 - $25.90 pr
Upper Coil Over Shock Mount Kit
The
upper
shock eyelets
attach to a
weld-in horizontally mounted crossmember with four
1/8”
4130
mounting tabs. Your choice of 1-5/8”x.083 4130 moly or 15/8”x.125 seamless mild steel (36” length). Kit comes complete with bolts, self-locking nuts and misalignment bushings.
JBRC1112 - $49.00
“In The Race For Quality, There is No Finish Line”
The JBRC Pro 4130 Ultra Light Pedal Assembly Kit is extremely light weight without compromising strength. All
friction surfaces have roller bearings to eliminate binding. Heavy duty clutch cross shaft with double shear clutch arm
allows for accurate air gap settings during clutch adjustment. Pedals have a mesh grading to eliminate slippery pedal
surfaces. The tubular structural design of the gas pedal eliminates all flex during wide open throttle conditions. The
brake pedal has been designed with the correct pedal to master
Pedals shown
cylinder ratio which is required for proper stopping pressures and
in chrome for
Not chassis tube
display purDisplay only
maximum brake life. This kit is available without clutch pedal for
poses only
automatic transmission cars.
Description
Part Number
Amount
Gas Pedal Only
Brake Pedal Only
Clutch Pedal Only
Brake & Gas Only
Brake, Clutch & Gas
Cros Shaft Only
JBRC1012
JBRC1013
JBRC1014
JBRC1015
JBRC1016
JBRC1009
$75.00
75.00
75.00
245.00
295.00
80.00
Bearing
Needle Roller Bearings
Dimensions
B1612 - 3/4” Wide - $8.50 I.D. 1.000
B1616 - 1” Wide - $8.50 O.D. 1.250
Used in JBRC pedal cross shaft assemblies
Gas Pedal Mount Kit
The JBRC mounting kit is
designed to be used with our
gas pedal. It is most commonly mounted from the steering column braces. Constructed of
light-weight 4130 moly tubing for strength.
JBRC1012A - $25.00
Pedal Boot Kit
Give the interior of your race car a professional look while
sealing out unwanted exhaust fumes and track dirt. Available
in black ballistic with or without kevlar lining. Comes complete
with boot retaining ring and with attaching hardware.
Ballistic
JBRC3001 - $29.00
Kevlar Lined
JBRC3002 - $49.00
Gas Pedal Stop
JBRC1102
Complete cross shaft pedal assembly shown above with
optional gas pedal stop. Photo not of actual chassis - display purposes only.
Gas Pedal Stop
This weld-on,
adjustable positive
pedal stop is constructed of 4130 moly steel
for maximum strength.
The gas pedal stop
eliminates linkage flex
which can result in
breakage. Adjustment of this stop is a must each
time engine and/or carburetor changes are made.
JBRC1102 - $25.00
Clutch Pedal
Stop
The clutch stop allows for
consistent pedal travel
each time the pedal is
depressed so that dead
nuts accurate air gap
adjustments can be made.
JBRC1103 $25.00
The One Stop Chassis Shop
24-hour FAX (636) 356-4667 http:jerrybickel.com
(636) 356-4727
15
stnenopmoC ladeP
Pedal Components
Ultra Light Pedal Assembly Kit
stnenopmoC egakniL & ladeP
Brake Pedal Push Rod
The JBRC push rod is constructed of 5/8” OD
4130 .058 wall tube with a 5/16” hole clevis welded on one end and a 3/8” right hand tube adapter
to be welded after cutting to desired length.
JBRC1017 - $25.00
Throttle Cable
6’ Universal throttle
cable available. Can
be custom tailored for
your application.
6’ Cable
JBRC5039
$49.00
Clutch Linkage
Constructed of 5/8”x.058 4130 moly with center hex
nut for easy adjustments. Weld bungs included to fit
3/8” right and left rod ends.
Without Rod Ends - JBRC1018 - $25.00
With Rod Ends - JBRC1050 - $40.00
Pictured
with rod
ends
A31799
A31126
6058-K32
Quick Release Linkage Ends
A31799
A31126
6058-K32
$10.00
$10.00
$12.00
10-32
1/4-28
1/4-28 HD
Adjustable Throttle Linkage
Hand Brake
The JBRC hand brake kit is designed to be used in
conjunction with the JBRC pedal assembly. A hand
brake allows the driver to stage keeping his right foot
on the gas pedal and eliminates the need to set the
Eliminate throttle linkage problems with the JBRC 4130 moly throttle
brake pressure and use of line lock during staging.
linkage. Designed so that length can be adjusted simply by removing
the quick pin and selecting a desired setting. A quick release carburetor throttle linkage is supplied for both ends of the linkage. This
linkage, along with a positive pedal stop, will insure wide open throttle performance virtually eliminating linkage failures.
JBRC1019 - $150.00
10-32 - JBRC1049 - $49.00
1/4-28 - JBRC1049HD - $59.00
Master Cylinder Mount Kit
Designed to mount Mopar style master cylinders on round
tube chassis. Made of .125 4130 moly and comes with gussets, adjustable rear support and NAS hardware.
JBRC1020 - $45.00
16
JB-042A
Master
Cylinder
Protection
Plates
Floor support ring
(JB-005A)
strengthens floor
around master
cylinder opening.
Protection plate
JB-005A
(JB-042A) protects the master cylinder itself from possible damage and
keeps caps in place. Fabricated from .050 4130 plate.
JB-005A - $15.00
JB-042A - $18.00
“In The Race For Quality, There is No Finish Line”
!
W
E
N
Carbon Fiber Master
Cylinder Cover
Complete Kit JBRC3026K - $69.00
Cover only JBRC3026 - $49.00
Mopar Style Master Cylinders
Dual 1” master cylinder features aluminum housing, factory mounting hole pattern and outlet thread size, large capacity plastic reservoir, master cylinder push
rod and dust boot. These master cylinders can be used with drum or disc
brakes. Available in both Pro model shown at left and the more economical
Sportsman model shown at right.
Pro Models
JBRC1063
JBRC1063A
$129.00
$199.00
cylinder only
JBRC1064
Sportsman Model
pushrod kit
$79.00
complete kit
WIL2604894 $119.00
Composite Master Cylinder
Wilwood’s high strength, lightweight composite master cylinder combine aerospace manufacturing technology with
racing performance requirements. The carbon reinforced composite revivor is molded around a durable aluminum
bore which is brush honed to ensure maximum cup seal life and fit. An increase of 30% more stroke provides greater
volume eliminating pedal pumping, and a large fluid reservoir with unique internal baffling prevents fluid aeration and
assures volume requirements to accommodate the long 1-1/2” stroke. Composite materials resists heat retention, lowering fluid operation temperature, while the compact design weighs only 14 ounces - less than half the weight of similar cylinders. Wilwood’s composite master cylinders incorporate both front and side mounting capabilities.
!
W
E
N
Pedal Assemblies
These forward mount pedal
assemblies are available in
both floor mount (6:1 ratio)
and swing mount (7:1 ratio)
configurations, and are ideal
for clutch and single master
cylinder brake applications.
Designed to accept either
our Composite, Remote
Combination or Tandem
Master Cylinders (Tandem
requires use of our adapter
kit), these pedals are strong,
compact and lightweight
(1.1 pounds). Our pedals
are corroding resistant and come with anti-slip floor pads.
DESCRIPTION
Floor Mount Pedal Assy (6:1)
Swing Mount Pedal Assy (7:1)
PART NO.
340-1289
340-1290
PRICE
$57.64
57.64
DESCRIPTION
PRICE
3/4” Composite M/C
$60.00
7/8” Composite M/C
60.00
1” Composite M/C
60.00
3/4” Diecast M/C
53.99
7/8” Diecast M/C
53.99
1” Diecast M/C
53.99
Rebuild Kits Available (Call for Pricing)
The One Stop Chassis Shop
24-hour FAX (636) 356-4667 http:jerrybickel.com
PART NO.
260-1101
260-1102
260-1103
260-6764
260-6765
260-6766
(636) 356-4727
17
stnenopmoC ekarB
The slickest way on the planet to cover and protect
you master cylinder. Extra long to allow trim fitting
to any style floor. Floor protection plate has built in
dzus fastener tabs to make the installation easy.
Comes as a complete kit or cover only.
stnenopmoC ekarB
LAM882
$69.80
Stage Gauges
The stage gauge is used to set minimum
and consistent brake pressures necessary when staging. Helps pinpoint brake
system and pedal ratio problems.
AUT4826
$79.00
AUT4426
$75.00
Pro Stock Brake Line Kit
We have done the leg work for you! Save time and money and achieve professional results by using the JBRC complete four wheel brake line kit. Kit is complete with 25’ of 3/16” steel tubing, 6’ of #3 teflon stainless braided hose, all necessary fittings, weld-on bulkhead mounting tabs and brake line to chassis
mounting straps. An additional feature of our kit is that it includes the required
fittings for line lock hook-up. Optional stainless steel upgrade.
Brake Line Kit - JBRC5014 - $149.00
With Stainless Line - JBRC5014A - $199.00
Master Cylinder Fittings
JB1073 - $9.95
1/2” to -3 AN
JB1074 - $9.95
9/16” to -3 AN
Banjo 9/16” Banjo 1/2” Caliper Banjo
LAM1841A - $24.95
LAM1841B - $24.95
- LAM1841C - $21.95
Roll Control Valve
•Stainless Steel Valve Assembly
•Fully Enclosed Electrical Coil
•Finned Aluminum Housing For Heat
Dissipation
HUR1745000 - $109.00
Valve Only
18
1
3
2
4
5
6
NO. Part Number
1
2
3
4
5
6
7
8
9
Brake Line Fittings
Description
7
8
9
Amount
804-3D 3AN Bulkhead Tee On Run $10.00
833-3D 3AN 90 Bulkhead
6.50
6091-03P 90 #3 TFE Hose End
8.50
6046-03P 45 #3 TFE Hose End
8.50
6001-03P Straight #3 TFE Hose End
5.50
818-3S #3AN Tube Nut (Steel)
.75
819-3S #3AN Tube Sleeve (Steel)
.75
816-3S 1/8” Pipe #3 AN Adapter (Steel) 1.25
AUR3/8RH #3AN RH Bulkhead Nut (Steel) .40
983203 #3 AN Straight Bulkhead
4.00
Proportioning Valve
Billet aluminum construction with pressure adjustments
from 100-1000 psi.
This lets you fine
tune the front to rear
braking balance.
Brake Fluid
Specially formulated HiTemp Racing Brake
Fluid has extremely high
boiling point to withstand
the severe heat requirements of drag racing.
Low viscosity allows
easy bleeding of brake
system. 12 oz. bottles
WIL260-2220
$44.95
WIL290-0633 - $6.95
WIL260-2220 - $44.95
Residual Pressure Valves
In-line residual pressure valves retain a specific brake line pressure to eliminate excessive pedal travel in both disc and drum brake
systems.
2# - WIL260-1874 - $18.95
10# - WIL260-1876 - $18.95
2# - LAM888 - $33.95
“In The Race For Quality, There is No Finish Line”
Rack & Pinion
Mount
Rack & Pinion Steering
JBRC offers this new OEM replacement 71-72 Pinto rack
and pinion. Factory mounting locations make professional
installation possible. This unit features a chrome center
tube and a polished housing. For these reasons, we use
and recommend this steering assembly.
Mounting the rack and
pinion can be easily
accomplished by using
the JBRC mounting kit.
The squeeze clamp
design eliminates the
need for welding to the
chrome tube of the rack and pinion. The driver’s side threaded
spud mount provides a strong, yet simple mounting method.
JBRC1023 - $29.00
WIL3502038 - $229.00
Tie Rod Kit
The JBRC Tie Rod Kit is designed to be used with the 71-72 Pinto rack assembly.
Engineered to adapt to the stock tie rods, this kit slips over and welds in place. Kit includes
Aurora HXAM high-misalignment rod ends, making the steering arm connection simple
and tow-in adjustments possible. NAS bolts and titanium safety washers included.
JBRC1022 - $149.00
The steering column should be light-weight yet not compromise strength. We have designed our steering column
with this requirement in mind. Constructed of 4130 moly
tubing, consisting of 1-1/4” column with 3/4” shaft, teflon
column bushings, aircraft quality u-joint, splined rack
adapter and your choice of Mark Williams or Wilwood
removable hub. You won’t find a better column kit on the
market. This kit is complete with column to chassis supports and is available with single or dual u-joints.
Removable Hubs
MAR10020
MAR10060
Part No.
JBRC1021
JBRC1021A
JBRC1021B
JBRC1021C
JB1010 - $40.00 pr.
Steering Column Kits
Hub Type
5-bolt SFI
3-bolt
3-bolt
5-bolt SFI
# U-Joints
single
single
dual
dual
Amount
$249.00
149.00
179.00
299.00
Lower Steering Shaft Bushing Kit
This bushing is required on all dual ujoint applications and recommended
on all shafts. The kit comes complete with bushings, bushing housing
and chassis mounting tube.
JBRC1104 - $25.00
JBRC1104A - $8.00 ea.
Part No. Amount
WIL2702016 $29.00
MAR10020 $76.00
MAR10025 $115.00
MAR10060 $96.00
STR1000
$75.00
STR1200
$86.00
Replacement Nylon bushings
Having the option of removing the steering wheel makes
racing easier for the driver to exit the car and crew members to work on it. In emergency situations, this feature is
a necessity. We offer the four types of steering hubs pictured above. Certain classes require SFI certification of
hubs, please specify when ordering.
MAR10025
Tie Rod Tubes Only -
WIL2702016
Hub Type
SFI
3-Bolt
4-Bolt
5-Bolt
3-Bolt
3-Bolt
5-Bolt
No
Yes
Yes
Yes
Yes
Yes
STR1200
STR1000
!
W
E
N
The One Stop Chassis Shop
24-hour FAX (636) 356-4667 http:jerrybickel.com
(636) 356-4727
19
stnenopmoC gnireetS
Steering Rack & Pinion
stnenopmoC gnireetS
Steering Joints
Pin and Block Universal Joints
!
W
E
N
The advantage to the pin and block style
of universal joint is a high strength to
weight, size and cost ratio. These joints
are manufactured from high strength billet
alloy heat treated steel. U10H Series 1”
O.D. Not recommended for street use.
CUR7428 - 3/4” x 3/4” I.D., all steel, slim line con- Smooth Bore to Smooth Bore
struction with ball and pin grease zerk in cross shaft.
Smooth Bore to Spline
$50.00
JBRC5040 - 3/4” x 3/4” joint is permanently grease
sealed by a rubber boot. Made of quality cadium
plated steel.
$69.00
CUR7422 - Same construction features as CUR7428
except it has Pinto internal splines on one end and
includes positive self-locking safety nut.
$65.00
JBRC5041 - Pinto splined rack adapter is machined
from high strength steel with Pinto internal spline on
one end and 3/4” I.D. on opposite end and includes
positive self-locking safety nut.
$19.75
5-Bolt Wheel
Adapter
Adapter kit designed to
bolt a 5-bolt Wheel to 3bolt quick release hub.
4130 moly & all hardware.
Single Needle Bearing Joints
Needle bearing joints last up to 10 times
longer than non-needle bearing joints.
Recommended for vehicles that are
street driven. Permanently lubricated and
sealed. They require no maintenance.
U16N Series 1 5/8” O.D.
Smooth Bore to Smooth Bore
Smooth Bore to Spline
“Pinless” Quick Release Hubs
3001
3004
3021
3024
3021
3024
20
GM Spline 3 Bolt Wheel
3/4”Shaft 3 Bolt Wheel
GM Spline 5 Bolt Wheel
3/4” Shaft 5 Bolt Wheel
!
W
E
N
$89.00
89.00
99.00
99.00
3001
3004
$61.00
64.50
Steering Wheels
The Pro’s choice! This attractive 3spoke design, 13” diameter rubber
gripped wheel features light-weight
aluminum construction. Choose
from black, red or blue vinyl grip.
This wheel bolts directly to the
Mark Williams quick release hub
J
B
R
C
and can be found on all
built cars.
GRA763-1 Black $70.00
GRA778 Red $70.00
GRA781 Blue $70.00
JBRC5503W w/stretch cord $149.00
JB-054A - $15.00
The “pinless” type features a positive lock system
with a squeeze release slip ring mechanism to provide the maximum in safety and convenience to all
race cars.All hub meet S.F.I. 42.1 specifications.
$41.05
50.52
GT Steering Wheels
Grant offers a variety of aluminum spoke wheels for all types
applications.The “D” shaped wheels were inspired by Formula 1
race cars.
1110
650
712
Carbon Fiber Design, 13”, 5-Bolt
Smooth foam cushion grip, 6061
Aluminum spokes, 13”, 3-Bolt
Black “D” shape, 13”, drill to fit
$175.00
59.00
99.00
650
1110
712
“In The Race For Quality, There is No Finish Line”
AB-5
AM-5
AB-6
AM-6
AB-8
AM-8
AB-10
AM-10
AB-12
AM-12
CB-3
CM-3
CW-3 (Female)
CB-4
CM-4
CB-5
CM-5
CB-6
CM-6
CB-7
CM-7
CB-8
CM-8
CB-10
CM-10
CB-12
CM-12
HXAM-6T
HXAM-7T
HXAM-8T
XAM-8
XAB-8
XAM-8-3
XAB-8-3
XAB-10
XAM-10
XALB-8
XALM-8
XB-10
XM-10
Shank Hole
5/16”
5/16”
3/8”
3/8”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
10/32”
10/32”
10/32”
1/4”
1/4”
5/16”
5/16”
3/8”
3/8”
7/16”
7/16”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
7/16”
1/2”
5/8”
5/8”
5/8”
3/4”
3/4”
3/4”
3/4”
5/8”
5/8”
3/4”
3/4”
5/16”
5/16”
3/8”
3/8”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
10/32”
10/32”
10/32”
1/4”
1/4”
5/16”
5/16”
3/8”
3/8”
7/16”
7/16”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
3/8”
7/16”
1/2”
1/2”
1/2”
1/2”
1/2”
5/8”
5/8”
1/2”
1/2”
5/8”
5/8”
Material
4130 Chrome Moly
4130 Chrome Moly
4130 Chrome Moly
4130 Chrome Moly
4130 Chrome Moly
4130 Chrome Moly
4130 Chrome Moly
4130 Chrome Moly
4130 Chrome Moly
4130 Chrome Moly
Mild Steel
Mild Steel
Mild Steel
Mild Steel
Mild Steel
Mild Steel
Mild Steel
Mild Steel
Mild Steel
Mild Steel
Mild Steel
Mild Steel
Mild Steel
Mild Steel
Mild Steel
Mild Steel
Mild Steel
4130 Moly, Hi-Misalignment
4130 Moly, Hi-Misalignment
4130 Moly, Hi-Misalignment
4130 Heavy Duty
4130 Heavy Duty
4130 Heavy Duty
4130 Heavy Duty
4130 Heavy Duty
4130 Heavy Duty
Aluminum
Aluminum
Mild Steel, Heavy Duty
Mild Steel, Heavy Duty
Part Number
1/4-RH-JAM
1/4-LH-JAM
5/16-RH-JAM
5/16-LH-JAM
3/8-RH-JAM
3/8-LH-JAM
7/16-RH-JAM
7/16-LH-JAM
1/2-RH-JAM
1/2-LH-JAM
5/8-RH-JAM
5/8-LH-JAM
3/4-RH-JAM
3/4-LH-JAM
Thread
LH
RH
LH
RH
LH
RH
LH
RH
LH
RH
LH
RH
RH
LH
RH
LH
RH
LH
RH
LH
RH
LH
RH
LH
RH
LH
RH
RH
RH
RH
RH
LH
RH
LH
LH
RH
LH
RH
LH
RH
Thread
s
t
u
N
Jam
The One Stop Chassis Shop
24-hour FAX (636) 356-4667 http:jerrybickel.com
1/4-28 RH
1/4-28 LH
5/16-28-RH
5/16-28-LH
3/8-24-RH
3/8-24-LH
7/16-24-RH
7/16-24-LH
1/2-20-RH
1/2-20-LH
5/8-18-RH
5/8-18-LH
3/4-16-RH
3/4-16-LH
Amount
sdnE doR aroruA
Part Number
16.74
16.48
19.48
19.25
28.95
28.71
38.81
38.57
55.29
55.08
5.02
4.82
4.65
5.15
4.96
5.64
5.45
6.41
6.21
7.55
7.35
10.17
9.98
13.84
13.64
18.86
18.66
53.49
64.37
79.62
38.51
38.71
55.50
55.50
55.23
55.04
33.40
33.40
31.42
31.22
Amount
.32
.44
.34
.56
.36
.60
.44
.71
.45
.95
.54
.90
.74
1.43
(636) 356-4727
21
turtS orP CRBJ
P R O S T RU T
!
W
E
N
FEATURES:
• Large diameter shaft for increased load support and less deflection.
• KONI’s latest generation valving for increased bump dampening control.
• All Struts are Double Adjustable for total tuning capability.
• Standard Length and Special “Low Profile” configurations available.
• Increased size Oil Reservoir for “Fade” resistance.
• All Structural Components manufactured from 4130 chromoly steel.
• Polished finish with electroless nickel plating provides a professional
quality appearance.
• Detent locking spring adjuster.
• Mark Williams state-of-the-art braking system featuring a “New
Concept” floating rotor eliminating the problem of wheel runout causing
brake drag.
A n d Th e r e ’ s M o r e
SELF-ALIGNING FLOATING DISC
Strut Assemblies - Double Adjustable
JBRC1200 JBRC Double Adjustable Strut
Suspension and Brake Assembly (Standard
length)...........................................$3,450.00
JBRC1201 JBRC Double Adjustable Strut
Suspension and Brake Assembly (1-1/2” over-
ONE PIECE CALIPER
Strut - Components
JBRC1202 JBRC Strut Lower Control Arms (Pair)
Includes stainless steel lower control arm bearings,
spirolox and hardware....................................$200.00
JBRC1203 Aurora 4130 Rod End Kit for JBRC
Struts -Includes (4)RAM-8T,(2) HXAM-6T-5.$279.00
JBRC1204 Special Strut Wheel Bearing Kit -Includes
all bearings,wheel seals and cotter pins (for 2
wheels).........................................................$89.00
MAR73300 Mark Williams Steel Front Brake
System........................................................$724.00
MAR73400 Mark Williams Carbon Front Brake
System.....................................................$2,895.00
MAR73004-4 Mark Williams Steel Front Brake
Relpacement Pads (set of 4)...............................$68.80
MAR73105-4 Mark Williams Carbon Front Brake
Relpacement Pads (set of 4).............................$637.00
22
• Cleaning/Lighting Holes
• Expansion Controlled Drive Lug System
• Optional Carbon/Carbon Disc Available
•
•
•
•
•
Unique One Piece Design Minimizes Anvil Deflection
Dual Piston Small Bore Caliper
Piston Pilot Guides Prevent Cocking
Aircraft O-Ring Sealed Inlet Boss
Torque Forces Not Absorbed By Caliper Body
KONI
!
W
E
N
g
n
i
c
a
R
KONI Special Designed (new generation)
strut valving. Featuring double external
adjustments for the ultimate in dampening
control, standard on all strut kits.
“In The Race For Quality, There is No Finish Line”
Forged aluminum body xrayed and penetrant inspected
to insure quality
• 17-4 Stainless steel spindles
• Koni/Strange wet kits
• Includes lower control arm
kit featuring Aurora 4130 rod
ends
• Major NHRA sponsor
• Fully adjustable rebound
Lamb Strut Systems
Lamb’s superior design has
been combined with
unmatched standards to ensure
the finest struts possible. All
components from the precision
alloy shock shafts, pistons,
cylinders and 4130 heat-treated
control arm assemblies and
brackets, are made in-house to
Lamb’s exacting specifications.
Only the highest quality rod
ends, manufactured of 4130,
4340 or 17-4PH stainless steel
are used on Lamb Struts. All struts assembles come less, control arms, control arm rod ends and tie rod ends.
Strut Assemblies - Single Adjustable
#1
#1A
Lamb Strut Suspension and Brake Assembly
(Standard length) $3,450.00
Lamb Strut Suspension and Brake Assembly (1-1/2”
overall shorter length than standard) $3,450.00
Strut Assemblies - Double Adjustable
#1DA Lamb Double Adjustable Strut Suspension and
Brake Assembly (Standard length) $3,995.00
#1ADA Lamb Double Adjustable Strut Suspension and
Brake Assembly (1-1/2” overall shorter length than
standard) $3,995.00
Strut - Components
#2
#3
#3A
Lamb Strut Lower Control Arms (Pair) Includes stainless
steel lower control arm bearings, spirolox and hardware
$325.00
NMB Stainless Steel Rod End Kit for Lamb Struts Includes (2) ARY6ECR, (4) ART8ECR rod ends & nuts
$399.00
Part # Adjust Brake Mt Amount
P-2659-D Internal Spot Direct $1674.75
P-2661-D External Spot Direct 1849.50
P-2662-D Internal Med Hub
1698.00
P-2664-D External Med Hub
1879.00
P-2665-D Internal HD Hub
1749.50
P-2667-D External HD Hub
1930.50
Strange Stainless Steel Ultra Strut Package
• Piston travels below spindle for
longer stroke
• Anglia style spindle
• Aluminum steering arm
• Stainless base, aluminum body
• NAS hardware, Aurora rod ends
• Two lengths to choose from
• Hypercoil springs
• Strange/Koni wet kits
• External rebound adjustable
• Serial Numbered
• NHRA Sponsor
P-2700-D
Stroke
2.5
3.63
Spring
Length
7”
8”
A
$2,490.00
“A”
“B”
Extended R.H. Compressed Extended R.H. Compressed
9.40
7.90
6.90
5.17
4.91
4.75
11.38
9.20
7.77
5.51
5.15
4.89
Aurora 4130 Rod End Kit for Lamb Struts - Includes (2)
ARY6ECR, (4) RAM8TC2 Aurora 4130 rod ends & nuts
$279.00
#2009 Special Strut Wheel Bearing Kit - Includes all bearings,
Strut Lower Control Arm Mount
The JBRC strut lower control arm mounting kit
consists of (8) 4130 x .125” thick mounting tabs
for a double sheer installation. Kit includes misalignment washers, NAS bolts, -AN washers
and self locking nuts.
JBRC1037A - $80.00
B
Upper
Strut
Mount
Unique
design features
strongest, yet
lightest possible way to mount upper
strut stud to you chassis. Comes with
welded strut cups and front and rear
gussets.
The One Stop Chassis Shop
24-hour FAX (636) 356-4667 http:jerrybickel.com
(636) 356-4727
23
stnenopmoC & sturtS
Front Suspension
Strange Strut Systems
Brake Kits
Lamb Brake Kits
Lamb Standard 4-3/4” X 5” B.C. Rear
$795.00
Brake Kit
132-0 Lamb Standard Carbon/Carbon Rear $ 2,998.00
Brake Kit
132-4 Lamb Carbon/Carbon Front Strut Braking System
Brake Kit
$2,895.00
• All Lamb standard rear disc brake systems include billet
calipers, cast rotors, billet rotor adapters, specially
ground 7075-T6 brackets and disc brake pads.
stiK ekarB
136D
Strange Rear Brake Kits
B-1700WC-D
B-1704WC-D
B-1706WC-D
B-1708WC-D
B-1710WC-D
B-1712WC-D
B-1716WC-D
C-1800UC-D
C-1808UC-D
C-1800UC-D
49-64 Olds ................................$ 582.45
65-73 Mopar ..................................582.45
Late Big Ford ................................582.45
49-72 Early Big Ford ......................582.45
Symmetrical ..................................582.45
65-73 Small Ford (Mustang) ..........582.45
67-77 Small (OEM) GM ..................582.45
Carbon/Carbon Olds ..................2,490.00
Carbon/Carbon Large Ford........2,490.00
Carbon/Carbon Symmetrical......2,490.00
Wilwood Rear Brake Kits
NEWle!t
Bil per
Cali
24
140-3259-B
140-3260-B
140-0263-B
140-4545-B
140-5771-B
140-0262-B
140-0261-B
140-3623-B
140-2119-B
140-0265-B
140-5348-B
140-0260-B
140-5255-B
140-0264-B
140-5349-B
8-1/4” and 9-1/4” Mopar................$429.00
8-3/4” and 9-3/4” Mopar..................429.00
12-Bolt Chevy (“C“ Clip) ................429.00
12-Bolt Chevy (“C” Clip Eliminator) 429.00
12-Bolt Chevy W/ 3.150 Bearing ....429.00
Small Ford ......................................429.00
Big Ford 2.36” offset ......................429.00
Big Ford 2.50” offset ......................429.00
Big Ford 2.50” offset (new style) ....429.00
Symmetrical....................................429.00
Symmetrical (11/16” studs) ............429.00
8-3/4” Mopar/ Dana (Green Brg) ....429.00
8/-3/4” Mopar/Dana (Green w/snp) 429.00
Oldsmobile / Pontiac ......................429.00
Oldsmobile / Pontiac(11/16” studs) 429.00
“In The Race For Quality, There is No Finish Line”
Mark Williams Brake Kits
Symmetrical Kits
71225
Solid Steel Disc Brake Kit ......................691.00
71250
Drilled Steel Disc Brake Kit ....................691.00
71260
Solid Steel Disc Brake Kit ......................995.00
71270
Drilled Steel Disc Brake Kit ....................995.00
71025
Solid Steel Disc Brake Kit ......................691.00
71050
Drilled Steel Disc Brake Kit ....................691.00
71125
Solid Steel Disc Brake Kit ......................691.00
MW Carbon Brake Kit
71150
Drilled Steel Disc Brake Kit ....................691.00
Fits MW 58580 or Lamb symmetrical type housing ends.
All Mark Williams 71000 series rear brake kits can be purchased as carbon/carbon for an additional $2223.00
71525
Solid Steel Disc Brake Kit ......................725.00
71550
Drilled Steel Disc Brake Kit ....................725.00
71825
Solid Steel Disc Brake Kit ......................725.00
71850
Drilled Steel Disc Brake Kit ....................725.00
71725
Solid Steel Disc Brake Kit ......................691.00
71750
Drilled Steel Disc Brake Kit ....................691.00
71925
Solid Steel Disc Brake Kit ......................691.00
71950
Drilled Steel Disc Brake Kit ....................691.00
Fits MW 58580 or Lamb symmetrical type housing ends.
Fits MW 58580 or Lamb housing ends. Dual calipers.
Fits MW 58580 or Lamb housing ends. Dual calipers.
Olds KIts
Fits MW 58500 or stock Olds housing ends that are rotated
90 degrees from stock position.
Fits MW 58500 or stock Olds housing ends that are rotated
90 degrees from stock position.
81200
Fits MW 58500 or stock Olds housing ends in stock position.
Carbon/Carbon Brake Kit......................2914.20
Fits MW 58500 or stock Olds housing ends in stock position.
Ford Kits
Fits MW 57830 or stock large Ford housing ends.
Fits MW 57830 or stock large Ford housing ends.
Fits MW 57800 or stock small Ford (Mustang) housing ends.
Fits MW 57800 or stock small Ford (Mustang) housing ends.
GM Kits
Fits MW 58600 or stock GM mid-size housing ends.
Fits MW 58600 or stock GM mid-size housing ends.
Fits stock housing ends with MW “C” clip eliminator kit.
Fits stock housing ends with MW “C” clip eliminator kit.
1
6
10
2
4
9
3
Wilwood Brake Pads
2
3
1
2
3
8
5
7
2
3
4
5
5
5
4
Poly Matrix “D” compound
15D-4330K Dynalite Single
15D-4331K Dynalite Dual
Cold Stoppers (Tan)
150-1251K Billet Spot
15T-5910K Dynalite Single
15T-5911K Dynalite Dual
Gator pads (Green)
150-2390K Dynalite Single
150-2391K Dynalite Dual
(Set 4)
(Black)
$ 38.00
48.00
28.00
39.00
48.00
46.00
68.00
Strange Brake Pads
B-2510-D
B-5010-D
B-5020-D
L-4050-H
B-1250P
(Set 4)
Single & 2 piston $30.00
4 Piston (soft)
38.00
4 Piston (metallic) 68.00
4 Piston (carbon) 500.00
2 Piston (carbon) 516.00
Lamb Brake Pads
6
6
3
7
8
6
Mark Williams Brake Pads
9 81130
10 81022
(Set 4)
Ferodo Hi-Friction
Carbon/Carbon
$ 64.00
564.00
Includes Stainless Steel Pad Backing Plate
Spot Pad Screws
Caliper Cotter Pin
The One Stop Chassis Shop
24-hour FAX (636) 356-4667 http:jerrybickel.com
(Set 4)
707-150 Strut Pad (pre89)
$ 38.00
707-625 Strut Pad
38.00
722
Metallic (Wilwood)
64.00
725
Met (Lamb 1600)
80.00
718B
Carbon/Carbon(rear) 516.00
734
Carbon/Carbon(front) 420.00
$1.25
$2.50
Bleeder Screws
Caliper Bridge Bolt
(636) 356-4727
$2.25
$8.75
25
stiK ekarB
Fits MW 58580 or Lamb symmetrical type housing ends.
stnenopmoC etalP rotoM
Description
Motor Plate Components
Motor Plates
Part No.
Amount
Motor Plate, Universal SB/Chevy JBRC9001
$100.00 JBRC front motor
Motor Plate, Universal BB/Chevy JBRC9002
100.00 plates are
Mid Plate, Universal Olds/Chevy JBRC9003
125.00 constructed
Motor Plate, Wide Body, BBC
JBRC9004*
225.00 from .250
Motor Plate, Wide Body, DRCE
JBRC9004D* 250.00 thick 6061 T-6 aluminum
Motor Plate, Merlin Wide Body
JBRC9005*
225.00
Motor Plate, SB Chrysler
JBRC9013
225.00 plate for maximum
Motor Plate, Merlin/Mopar
JBRC9015
225.00 strength. Our light-weight plates are designed to mount
Motor Plate, SBC
JBRC9009
225.00 directly to the chassis, not only mounting the engine, but
Motor Plate, SBC Conv Broke
JBRC9009B 250.00 strengthening the frontal area of the chassis.
Motor Plate, SB Chrysler Truck
JBRC9018
225.00
Motor Plate, SB Chry Truck Broke JBRC9018B
250.00
Mid Plate
Mid Plate, Olds/Chevy
JBRC9006
225.00 JBRC mid plates are constructed
Mid Plate, Chrysler
JBRC9012
225.00 from .250 thick 6061 T-6 aluminum
Block Protector, GM, T6061
JBRC9008
95.00
Designed to allow engine
Block Protector, GM with Bungs JBRC9008A
200.00 plate.
Block Protector, Chrysler
JBRC9014
95.00 to be removed and replaced
Motor Plate, Universal SB/Ford W JBRC9021
100.00 with the flywheel clutch
Motor Plate, Universal SB/Ford C JBRC9022
100.00 assembly in place. This
Motor Plate, Universal BB/Ford
JBRC9023
100.00 plate remains bolted to
Mid Plate, Universal SB/Ford
JBRC9024
125.00 the chassis, thus elimiMid Plate, Universal BB/Ford
JBRC9025
125.00 nating the need for
Motor Plate, Universal SB/Mopar JBRC9026
100.00 frame to bellhousing
Motor Plate, Universal BB/Mopar JBRC9027
100.00
Mid Plate, Universal SB/Mopar
JBRC9028
125.00 mounts. The center
Mid Plate, Universal BB/Mopar
JBRC9029
125.00 frame rails remain tied together
* Available less water pump holes
whether the engine or transmission is or is not installed.
Universal Motor Plates and Mid
Plates
Rear Engine Block
Protectors
Available for most popular applications. Each plate
is precision cut from .250 thick 6061 T-6 aluminum.
Design allows you to fit your exact chassis dimensions.
12”
JBRC
36”
Welded Bung
Option
24”
24”
26
Allows the bellhousing to
be bolted at the bottom
without using nuts on the
fasteners. Bungs are
welded to block protector
with replaceable stainless
steel threaded inserts.
Bungs and inserts also
sold separately.
Bung - JB1007 - $3.75
Insert - JBRC5029 - $5.25
light-weight aluminum block protectors
provide rear engine protection in the event of
clutch
explosion.
Starter drive access
holes have been pilot
hole drilled so the plate
can
accommodate
either right or left hand
starter mounting locations. (.125 Thick)
“In The Race For Quality, There is No Finish Line”
Motor Plate Mount Kit
JBRC1047 - $40.00
Mid Plate
Mount
Designed to be used
with the JBRC mid
plate, the upper
mount consists of a 1”x .058 4130 tube (not pictured) and
runs diagonally between upper strut supports. The lower
mid plate gussets support the rear portion of the mid plate.
By mounting the mid plate in this manner, it eliminates
engine frame twist and aft drivetrain movement during hard
launches.
JBRC1048 - $80.00
Lenco Transmission Mount Kit
Liberty and G-Force Transmission Mount
The JBRC Lenco transmission mount allows
easy installation and removal of the transmission
utilizing a slide mount design. Constructed of
4130 moly tubing.
JBRC1004K - $60.00
JBRC1005G
JBRC1005L
The JBRC Liberty and G-Force transmission mount are
designed to bolt to machined mounting surfaces enabling transmission mounting points to be consistent from one transmission to
another. The slide design allows easy installation and removal of
the transmission. Constructed of 4130 moly steel.
Automatic
Transmission Mount Kit
JBRC1005L - Liberty - $195.00
JBRC1005G - G-Force - $195.00
JBRC1005GN - G-Force (new style) - $195.00
Transmission
Slide Mount Kit
This kit is constructed of 4130
moly. The lower tab welds directly
to the frame crossmember. The
upper tab mounts directly to trans
mounting surface.
Our kit is designed to be welded to
chassis crossmember and allows
easy installation and removal of our
transmission mount kits. Includes
4130 moly tubular chassis slides
and gusseting material.
JBRC1008 - $65.00
Automatic Transmission
Shifter Mount
Constructed of 4130 moly and
designed to mount to the front drive
shaft loop or 4-link support pipe.
Easily removable via supplied pit pin.
Will accommodate most automatic
shifters.
JBRC1008S - $59.00
JBRC1003 - $60.00
Automatic Transmission
Polyurethane Mount
These replacement mounts for G.M and
Ford applications are the best of both
worlds. Soft enough to eliminate vibration, yet strong enough for racing. Built
in safety interlock feature.
G.M. Style Mount
Ford Style Mount
3-1108 - $29.00
4-1104 - $32.00
Removable Transmission Crossmember
Compatible with round or square frame rails. Allows quick transmission removal.
Available 1-5/8” 4130 or mild steel tubing (36” length). Complete with transmission
mount, tabs and fastening hardware.
JBRC1062 - $49.00
The One Stop Chassis Shop
24-hour FAX (636) 356-4667 http:jerrybickel.com
(636) 356-4727
27
stnuoM noissimsnarT
Constructed of .125 thick
4130 moly plate. A large
placement platform allows engine to be set in
place maintaining engine
height during installation.
Bolt holes in motor plate tab are not drilled to allow the use
of virtually any style motor plate. Comes complete with NAS
bolts, weld-on back-up washers and 1/2” moly support tube.
stnenopmoC & stfahsevirD
D r i v e s h a f t s & C oMark
m pWilliams
o n eAluminum
nts
JBRC 4130 Driveshafts
JBRC 4130 Driveshafts
The Strongest
Driveshaft on
the Planet!
Our bullet proof professional shaft is constructed of
3” OD x .083 4130
heat treated tubing
with precision
aligned and
welded JBRC 4140 forged steel weld yokes
and JBRC solid heavy duty 1350 joints.
Every shaft is electronically balanced with
the transmission yoke installed.
Suitable for all racing applications
and highly recommended for high
horsepower Pro Stock and Pro
Modified cars or the heavy weight
Driveshafts priced
race cars.
less yokes.
NOTE:
MW’s new aluminum shaft features advance Duralcan®
material. Material content increases yield strength by
28% and elasticity by 41%, which in turn,
increases the critical shaft speed
(the RPM at which the
shaft will go
into harmonic
vibration and risks self
destruction). Torsional wind-up is
reduced which can have a profound
improvement on reaction times. MW weld yokes produced
from aluminum alloy are 30% stronger and the competition! Balancing weights attach to weld yoke rather than to
the tube.
3 1/2” MAR39900 - $558.00
4” MAR39500 - $510.00
U-Joints & Stuff
Pro Driveshaft Loop
Our 4130 moly
tubular 360
degree drive
shaft loop is
light-weight but
built for
strength.
Designed for
upper half or
complete removal. Comes with detent pins, chassis plates, gussets and mounting post & sleeves.
JBRC1001 - $129.00
Sportsman
Driveshaft Loop
This 360 degree driveshaft
loop is light weight yet strong,
constructed of 1” x .058 moly
tubing and designed for easy
removal. Available with welded
or unwelded lower loop. Kit
comes with detent pins, frame
plates,
gussets
and mounting post & sleeves.
JBRC1001S (welded)
$79.00
JBRC1001SK (unwelded)
$55.00
28
1350 Spicer Precision Series with Lube Zirk
JBRC1056 - $21.50
1350 Series Heavy Duty Impact Joint
Solid, non-greaseable
JBRC1057 - $39.50
U-Bolt Kit, 1350 Spicer Series (pr)
JBRC1058 - $12.00
Pro Stock Driveshaft
Cover
24”
NHRoAved
Appr
This unit is designed to
meet the NHRA rule specifications. Kit includes two
rolled .050 4130 moly plates
that completely encase the
drive shaft and transmission yoke. Comes with all necessary
mounting hardware.
JBRC1002B Cover w/ 2 JBRC1001SK - $250.00
JBRC1002C (Cover only) - $150.00
Pro Modified Driveshaft Cover
This unit is designed to
meet the IHRA rule specifications. Kit includes one
360 degree Pro Driveshaft
loop (not pictured), two
rolled .050 4130 moly
plates that completely
encase the drive shaft ,
front transmission yoke. Comes with all necessary mounting hardware.
36”
JBRC1002 Cover w/ 1 JBRC1001 - $295.00
“In The Race For Quality, There is No Finish Line”
Transmission Yokes
39014
39015
39008
39005
39006
39002
MW Chrysler Transmission Slip Yoke ....182.00
39003
MW 8.5” GM 10 Bolt Pinion Yoke ..........165.00
39006
MW GM 12 Bolt Pinion Yoke (long) ........165.00
32 spline, for 1350 series U joint. Turbo 400 and Super T-10
trans. “D” = 5-3/4”
39008
MW 9” Ford Pinion Yoke ........................150.00
27 spline, for 1350 series U joint. Powerglide and Turbo 350
trans. “D” = 5-13/16”
39011
MW 9” Ford Pinion Yoke ........................150.00
32 spline, for 1350 series U joint. Lenco trans. “D” = 4”
39014
MW Dana 60 Pinion Yoke ......................165.00
16 spline, for 1350 series U joint. Lenco trans. “D” = 4”
39016
MW 8-3/4” Mopar Pinion Yoke ................180.00
31 spline, for 1350 series U joint. C-6 and Toploader trans.
“D” = 6-1/8”
39018
MW ‘57-‘64 Olds/Pontiac Pinion Yoke ....180.00
39023
MW 8.8” Ford Pinion Yoke ......................165.00
39038
MW GM 12 Bolt Pinion Yoke (short) ......165.00
30 spline, for 1350 series U joint. Mopar, Doug Nash and
Liberty trans. “D” = 6-1/8”
39004
39005
39013
39015
39020
MW Turbo 400 Transmission Slip Yoke ..182.00
MW Powerglide Transmission Slip Yoke 182.00
MW Lenco Transmission Slip Yoke ........182.00
MW Lenco Transmission Slip Yoke........182.00
MW C-6 Ford Transmission Slip Yoke ..182.00
39022
MW Ford C-4 Transmission Slip Yoke ....182.00
39040
MW G-Force Transmission Slip Yoke ....182.00
39032
Hardened Transmission Slip Yoke ..........197.00
39034
Hardened Transmission Slip Yoke ..........197.00
39035
Hardened Transmission Slip Yoke ..........197.00
28 spline, for 1350 series U joint. C-4 trans. “D” = 5-13/16”
16 spline, for 1350 series U joint. G-Force trans. “D” = 3
30 spline, for 1350 series U joint. “B” = 3-3/16”
30 spline, for 1350 series U joint. “B” = 3-7/8”
28 spline, for 1350 series U joint. “B” = 3-7/8”. Note: 57604
shim required if yoke is used with stock support.
35 spline, for 1350 series U joint. “B” = 3-7/8”
29 spline, for 1350 series U joint. “B” = 3-1/32”
10 spline, for 1350 series U joint. “B” = 3-1/2”
13 spline, for 1350 series joint. “B” = 3.160”
30 spline, for 1350 series U joint. “B” = 3-9/32”
30 spline, for 1350 series U joint. “B” = 2-7/8”
30 spline, for 1350 series U joint. Liberty trans. “D” = 6-1/8”
32 spline, for 1350 series U joint. Jerico and G Force trans.
“D” = 5-3/4”
27 spline, for 1350 series U joint. Dedenbear Powergilde
trans. “D”= 5-13/16”
Rapid Release yokes
39115
39105
allow the driveshaft to
be disconnected at the
transmission rather
than at the pinion.
These yokes are the
lightest and most
compact units of this
type on the market.
39906
39911
39908
39915
All MW aluminum yokes are CNC machined from 7075-T6
billet material and hard coat anodized for maximum durability. 9” Ford pinion yokes include special splined hard39906
MW Aluminum 12 Bolt Pinion Yoke ........295.00
30 spline, for 1350 series U joint. Mopar, Doug Nash and
Liberty trans. “D”=6-1/8”
39908
MW Aluminum 9” Ford Pinion Yoke ........295.00
32 spline, for 1350 series U joint. Turbo 400 and Super T-10
trans. “D”=5-3/4”
39911
MW Aluminum 9” Ford Pinion Yoke ........295.00
27 spline, for 1350 series U joint. Powerglide and Turbo 350
trans. “D”=5-13/16”
39915
MW Aluminum Lenco Slip Yoke..............200.00
39110
39102
39104
39105
MW Rapid Release Mopar Yoke ............215.00
MW Rapid Release Turbo 400 Yoke ......215.00
MW Rapid Release Powerglide Yoke ....215.00
30 spline, for 1350 series U joint. “B”= 3 7/8”
28 spline, for 1350 series U joint. Includes special splined
hardened washer. “B”= 3-7/8”
35 spline, for 1350 series U joint. Includes special splined
hardened washer. “B”= 3-7/8”
16 spline, for 1350 series U joint. U bolt style. “D”= 3-3/4”
39113
MW Rapid Release Lenco Yoke ............215.00
39925
MW Aluminum Lenco Slip Yoke..............200.00
39115
MW Rapid Release Lenco Yoke ............215.00
49008
Titanium Pinion Yoke, 9” Ford ................770.00
39120
MW Rapid Release Ford Yoke................215.00
49011
Titanium Pinion Yoke, 9” Ford ................770.00
39110
Replacement Aluminum Caps, (pr) ..........43.50
49015
Titanium Trans Slip yoke, Lenco ............750.00
32 spline, for 1350 series U joint. Lenco trans. “D”=4”
16 spline, for 1350 series U joint. Lenco trans. “D”=4”
31 spline, for 1350 series U joint. C-6 and Toploader trans.
“D”=6-1/8”
16 spline, for 1350 series U joint. Press style. “D”= 3-3/4”
28-spline, standard pinion, 1350 joint, B=3-7/8”
35-spline, large pinion gears, 1350 joint, B=3-7/8”
Lenco 16 spline, 1350 joint, B=3-1/2”
The One Stop Chassis Shop
24-hour FAX (636) 356-4667 http:jerrybickel.com
(636) 356-4727
29
sekoY noiniP & noissimsnarT
39020
Pinion Yokes
stnenopmoC & sgnisuohlleB
Bellhousings & Components
Steel & Titanium
Bellhousings
• Available in 7-1/2”, 8-1/8”, 8-5/8”
• Available With 6.1, 6.2, 6.3 SFI Certs
• Optional Liner Available
• Single or Dual Starter Pockets
• Most Transmission Types
• Cross Shaft or Fork
Steel Prices Start at $1,199.00
Titanium Prices Start at $3,100.00
Bellhousing
Bearing Collars Bellhousing Stud w/12pt
Short Collar
Non-locking Nuts
4.125 OAL 1.750 O.D.
JBRC5720 - $130.00
Clutch Alignment
Tool
(5 each per package)
JBRC5064 - 3/8” x 2.300” - $29.00
5.125 OAL 1.750 O.D.
JBRC5721 - $130.00 JBRC5065 - 7/16” x 2.750” - $32.00
JBRC5066 - 1/2” x 2.750 - $48.00
Proximity Sensor
JBRC5532-5/16 - $70.00
JBRC5532-3/8 - $125.00
Long Collar
• Both Short and Long
Collars threaded for 5/16”
& 3/8” Proximity Sensors
Manufactured from high impact
plastic. Holds clutch in place while
pressure plate is installed. A must
for multi-disc clutch assemblies.
JBRC5325 - 1 3/8” x 10
$10.00
JBRC5382 - 1 3/16” x 16
$10.00
Crankshaft Pilot Bearing
Sealed Ball Bearing used to adapt
Ford size input shaft to Chevrolet
crankshaft.
LEN131000 $32.00
Clutch Dial
Indicator
Depth
Gauge
TAV2700
TAV2710
TAV2701
TAV2702
TAV2703
Dowel Pins
Solid Pin
Hollow Pin
.007 Offset Pin
.014 Offset Pin
.021 Offset Pin
$13.00/pr
$17.00/pr
$16.00/pr
$16.00/pr
$16.00/pr
Cross Shaft Components
Cross Shaft - 16050 - $75.00
Fork and Bolt - 16060 - $110.00
Billet Arm - 16070 - $65.00
Cross Shaft Throw Out Bearings
1.640 Bearing - 131011 - $89.50
2.062 Bearing - 131012 - $89.50
2.250 Bearing - 131013 - $89.50
2.900 Bearing - 131014 - $89.50
JBRC4068
$129.00
30
“In The Race For Quality, There is No Finish Line”
eliminate rotation on the fork. Reduces runout in linkage
and virtually stop counterweight arm wear. Comes in 6 different lengths and 2 diameter bearings.
Length
Length measurement is entire length of
bearing and collar combined
4340 Clutch Fork
This clutch fork is designed with a completely new
concept in pivoting . We have eliminated the binding
of the old ball and clip design by using a heim joint for
the pivot. Three different ratios from the same fork.
An adjustable pad allows the pivot location to be
moved in the bellhousing.
Brg & Collar Assy Amount Collar only Amount
1.635 Long
JBRC5702A $60.00 JBRC5702 $40.00
1.935 Long
JBRC5704A
65.00 JBRC5704 45.00
2.265 Long
JBRC5706A
70.00 JBRC5706 50.00
2.750 Long
JBRC5708A
75.00 JBRC5708 55.00
3.000 Long
JBRC5710A
80.00 JBRC5710 60.00
3.250 Long
JBRC5712A
85.00 JBRC5712 65.00
Dia.
Part No. Description Amount
3.500
JBRC5700 Bearing only
$30.00
3.275
JBRC5701 Bearing only
30.00
(pad and heim joint sold separately)
JBRC5057B - $295.00
4340 Fork Pivot Kit
4340 Fork Pivot Pad
JBRC5057A - $39.00
JBRC5057C - $35.00
Designed to bolt to the face of
the bellhousing. Three sets of
fasting holes allow pivot location to be adjusted.
4130 rod end, Jam Nut, NAS
Shoulder Bolt, Stainless
Washers and Nylock included
in this kit.
Clutch Counterweight Kit
Rugged case,
counterweight
down to .01
gram. Includes
groups of 30 ea.
aluminum and
steel washers,
aluminum, steel
and nylon bolts.
Digital scale
accurate to .01g.
Operates on
110V or 9-volt
battery.
Clutch Fork Components
Heavy duty clutch fork, stud ball and clip.
Kit
Fork
Stud
Clip
JBRC5057K
JBRC5057
JBRC5058
JBRC5059
$149.00
$135.00
$12.50
$1.50
Complete Kit
Counterweight only
Kit Carrying Case only
Replacement Counterweight Set
The One Stop Chassis Shop
24-hour FAX (636) 356-4667 http:jerrybickel.com
JBRC4063
JBRC4064
JBRC4063C
JBRC4067
$419.95
$144.95
$79.95
$129.95
(636) 356-4727
31
stnenopmoC gnisuohslleB
Fork Throw Out Bearings
JBRC exclusive throw out bearing collars, CNC milled to
stnenopmoC & sraB eileehW
Wheelie Bars & Components
Pro Wheelie Bars
Pro Wheelie Bar Components
Wheelie bars are a vital part of the rear suspension and have a definite effect on chassis performance. The construction of the
wheelie bars also attributes to their effectiveness during tuning. These JBRC pro style
wheelie bars are constructed of 4130 moly
tubing and have a rear bracket designed to
distribute the load forces both to the upper
and lower sections of the bars. The standard wheelie bar is 60” in length for NHRA
style Pro cars and 66” in length for IHRA
style Mountain Motor cars. The Pro Modified
bar has increased tubing size with upper
and lower sections of the bars being tied
together with adjustable links. The standard
Pro Mod wheelie bar length is 85” with custom lengths available. 60” Pro wheelie bars
feature 1-1/8” lower frame with 1” uppers.
66” Pro wheelie bars feature 1-1/4” lower
frame with 1-1/8” or 1-1/4” uppers. 85” Pro
Mod wheelie bars feature 1-1/4” lower frame
with 1-1/4” uppers.
Our unique bracket design has two pin
locations allowing bars to be raised quickly
and held up for clearance when jacking and
loading car.
Wheel Housing
Gusset
Push/Pull Pin
Chrome
Plating
Available
Pro-Mod Wheelie Bars
Pro
Pro
Pro
Pro
Pro
Pro
JBRC1031
JBRC1031K
JBRC1031A
JBRC1031AK
JBRC1032
JBRC1032K
Call for Pricing on Custom Lengths
Wheelie Bars (Welded) 60”
Wheelie Bars (Unwelded) 60”
Wheelie Bars (Welded) 66”
Wheelie Bars (Unwelded) 66”
Mod Wheelie Bars (Welded) 85”
Mod Wheelie Bars (Unwelded) up to 85”
Steel
32
Aluminum
!
W
E
N
Polyeuthane
JBRC5052 $65.00 ea
JB-079
$3.50 ea
JBRC-041B $22.50 ea
Wheelie Bar Net
Keeps parachute from getting tangled in
wheelie bars. Fabricated to your pattern.
$695.00
495.00
795.00
595.00
995.00
695.00
JBRC3025 from $90.00
Wheelie Bar Wheels
Available in cad plated steel, aluminum, our wheels have
roller bearing construction with a durable rubber outer
wheel surface.
Steel 3/8” Hole
JBRC5017
$28.00 ea
Aluminum 3/8” Hole
JBRC5017A $30.00 ea
Aluminum 1/2” Hole
JBRC5017B $30.00 ea
Polyuethane 3/8” Hole
JBRC5017P $49.00 ea
“In The Race For Quality, There is No Finish Line”
Pro-Sportsman 60” Wheelie Bars
Pro/Sportsman Wheelie Bar
Components
Spray-On Wheelie Bar Chalk
Special bracket design has two pin locations allowing
Easy to use VHT Professional Racing Wheelie
bars to be raised quickly and held up for clearance
Bar Chalk was developed with the help of profes- when jacking and loading car.
sional drag racers. Simply shake,
spray, and get underway. Available in
2 colors .
SP-166 Green - $9.00
Wheelie Bar Chalk
Wheels Up™ transfers to the track
surface easily, taking the guesswork
out of chassis adjustment. The Special
Applicator assures the correct amount
is applied to each wheel.
GED 111 White $6.99
Wheel Housing
Gusset
Push/Pull Pin
Clevis
JB-199
$20.00 ea
JB-198
$6.50 ea
JBRC-039D $18.40 ea
JBRC5870 $12.00 ea
Weld Racing Wheels
(1/2-20 Thread, 3/8” hole, 5/16” slot)
M
Ca
r
o
o
r
e
Wh ee l P r
o
w
T
l
l l for Spec ia
i cin g !!!!
Part No.
Magnum Drag 2.0
Description
786-15000
786-15001
786-515278
786-516278
786-616278
786-616278DBL
786-616418
786-616418DBL
15x3.5
15x3.5
15x15
15x16
16x16
16x16
16x16
16x16
Bolt Circle Offset Amount
Anglia SP
1.75
$405.00
Strange SP
1.75
405.00
5x4.75
4.00
387.00
5x4.75
4.00
405.00
5x4.75
4.00
459.00
5x4.75
4.00
1062.00
5x5
4.00
459.00
5x5
4.00
1062.00
Part No.
788-15000
788-15001
788-515278
788-516278
788-616278
788-616278DBL
788-616418
788-616418DBL
Aluma Star 2.0
Description
15x3.5
15x3.5
15x15
15x16
16x16
16x16
16x16
16x16
The One Stop Chassis Shop
24-hour FAX (636) 356-4667 http:jerrybickel.com
Bolt Circle Offset Amount
1.75
$387.00
1.75
387.00
4.00
373.50
4.00
391.50
4.00
441.00
4.00
1053.00
4.00
441.00
4.00
1053.00
Anglia SP
Strange SP
5x4.75
5x4.75
5x4.75
5x4.75
5x5
5x5
(636) 356-4727
33
sleehW gnicaR dleW
We now have an affordable wheelie bar for the serious Sportsman
Racer. 1-1/8”x.058 wall 4130 moly make up the main frame and
upper bars. Push/pull pins make adjustments easy. Two pin locations
allow bars to be raised and held in place for jacking and loading. Kits
come completely welded in your ¢ to ¢ requirements or in partially
welded kit form. Welded kit requires final welding of one end of upper
bars to insure proper fit. Heavy duty ball bearing wheels, housing
brackets and all necessary NAS hardware included. Custom lengths
available upon request.
Welded Kit - JBRC1031S - $579.00
Unwelded Kit - JBRC1031SK - $379.00
stnenopmoC metsyS gnilooC
Cooling Systems
All Aluminum
This all aluminum sirocco replacement
radiator offers additional cooling capabilities. Manufactured with a heavy
duty 2-1/4 wide core, 21” wide by 13”
tall, with built in mounting lugs. Three
styles to choose from.
LH Outlets 1-1/2’ upper,
1-3/4” lower - RH cap
JBRC5072 - $299.00
RH Outlets 1-1/2” upper,
1-3/4” lower - LH cap
JBRC5073 - $299.00
Sirocco
Constructed of a light-weight aluminum core with plastic tanks. Its
compact size of 26” wide by 12”.
Manufactured with built-in mounting
lugs and 1-1/4” inlet and outlet
located on right side.
W/O Neck
With Neck
JBRC5070 - $99.00
JBRC5071 - $99.00
Sirocco Fan Shroud
Heavy Duty Composite Material, fits
19” Sirocco
Radiator.
Our removable radiator
mount is constructed of
1/2” 4130 moly tubing
with mounting tabs
designed to bolt directly to radiator mounting
lugs. Kit comes complete with weld to chassis mounting tubes and
retaining pins.
JBRC5074 - $539.00
JBRC5074M - $825.00
Aluminum “Y”
Water Manifold
JBRC5070S
$77.95
!
W
E
N
RH Outlets 1-1/4” upper,
Radiator Mount
Kit
Aluminum Pro
The ultimate in professional racing radiators! The built-in aluminum shroud with
intregal electric fan, hand formed side
tanks and heliarc welding to vacuum
brazed core insures that this radiator is
number one in quality and performance.
Available in custom sizes and inlet and outlet requirements. Heavy Duty true crossflow with lower transfer under core.
CRR0020 $279.99
New Style Aluminum Drag Radiators
This new designed radiator developed from Winston Cup technology. Two models to choose from. HD standard or HD with built in water
pump.
JBRC1044 - $49.00
Radiator Overflow Tanks
Your choice of aluminum construction or one piece
molded plastic. Both have one quart capacity and
provisions for mounting. Both tanks are equipped
with a lever handle petcock for easy draining.
Black Poly JAZ-600-025 - 01 $29.00
Aluminum 1/8” NPT Female JBRC5027 $59.00
w/fan & shroud 22” x 13”
CRR10000 $499.99
w/fan & shroud w/pump
CRR10003 $1199.99
Overflow Tank Mount
This mounting bracket is
designed to mount the overflow
tank to the side of the radiator
mount. It is designed to be
retained by the same bolts that
mount the radiator.
JB-125 - $9.00
Slotted universal holes for a variety of
mounting applications. Can easily be offset bent for clearance.
34
“In The Race For Quality, There is No Finish Line”
Meziere Billet Aluminum Water Pump
• Flow rates from 35 to 60 gallons per minute
• 9 psi static pressure
• 2,000 hr seal life expectancy
• Weighs under 6 lbs
• Numerous applications
• 18 volt motor available
• 1 year warranty
Prices From $277.00
Radiator Hose Heater
Outlets for large and swivel
water necks come in several
configurations. They are supplied with sealing o-ring.
WN-0031 - 1-1/4” Rubber Hose
WN-0032 - 1-1/2” Rubber Hose
WN-0033 - 1-3/4” Rubber Hose
WN-0040 - #16 -AN Hose
WN-0041 - #20 -AN Hose
WN-0042 - #10 - AN Hose
WN-0043 - #12 -AN Hose
$15.00
$15.00
In-line radiator hose & screw in heaters. Operates on
110 volts, comes with clamps and electrical connection.
1-1/4” - JBRC5006 - $49.00
1-1/2” - JBRC5007 - $49.00
1-3/4” - JBRC5008 - $49.00
3/4” NPT - JBRC5527 - $46.00
Sirocco
Cap
JBRC5078
$9.00
Sirocco Temp Low Pressure
Sender Plug
7# Cap
JBRC5075
$10.00
JBRC5079
$11.00
Radiator Hose Filler
•356-T6 Cast Aluminum
•Splices Into Upper Hose
•Allows Complete Filling of Cooling System
•100% Leak Tested
•Accepts Standard Size Radiator Cap
Large Water Necks
Swivel Water Neck
$87.50
WN-0020 - $65.00
•Billet Aluminum
• Swivel Neck Fits Bolt
• Overflow Hole Tapped for 1/8” NPT Pattern of any Chevy Manifold
•Choice of Driver or Pass Side Outlet
• Designed to Accept any
• Available with 1/2” NPT Threaded
Standard Water Neck Outlet
•Hole for Temp Sender
• Double O-Ring Design
Insures a Good Seal at any
WN-0015D - Driver Side
Angle
WN-0017D - Driver Side Tapped
• 360° Swivel Rotation for
WN-0015P - Pass Side
Various Hose Configurations
WN-0017P - Pass Side Tapped
Electric Radiator Fan
Our fan kits contain a heavy-duty, low
amperage reversible 12 volt electric motor.
The high impact plastic blade will push or
pull by simply reversing the polarity. Fan
kits are available in 12”, 14” and 16”.
MOR63730 - 1-1/2” - 1-1/2” - $29.00
MOR63740 - 1-1/2” - 1-1/4” - $29.00
MOR63745 - 1-1/4” - 1-1/4” - $29.00
12”
14”
16”
The One Stop Chassis Shop
24-hour FAX (636) 356-4667 http:jerrybickel.com
- JBRC5520 - $79.00
- JBRC5521 - $89.00
- JBRC5522 - $99.00
(636) 356-4727
35
seirosseccA & spmuP retaW
Water Neck Outlets
Water Pump Inlet Fittings
To accommodate different systems, we offer a variety of inlet
fittings for rubber and -AN style
lower hoses.
WP-1125 - 1” NPT - 1-1/4” Hose
WP-1150 - 1” NPT - 1-1/2” Hose
WP-1175 - 1” NPT - 1-3/4” Hose
WP-1012AN - 1” NPT - #12 -AN
WP-1016AN - 1” NPT - #16 -AN
WP-1020AN - 1” NPT - #20 -AN
stnenopmoC lacirtcelE
Electrical Components
Battery Mounts
For strong and light-weight battery mounts, the JBRC battery
mount kit is constructed of .050 4130 moly material and
designed for use with group 24 batteries. Single tray weighs 11/4 lbs dual 2 lbs. Features hollow 3/8” diameter hold down
bolts. Easily installed in trunk area of most applications and is
available in dual or single mount styling.
Single Mount JBRC1025
Dual Mount JBRC1024 -
- $90.00
$120.00
Charge Lugs
Turbo Start Racing Batteries
#1 Choice For Every Car We Build
• Specifications: 10.08” L x 6.39” W x 8.79” H
Height overall to top of terminal
• Amp Rating: 60 AMP Hr • 550 Cranking Amps
• 70 Minute Reserve Capacity
• Weighs only 42 lbs.
16V24 - 2 Post Battery - $164.00
16V324 - 3 Post Battery - $178.00
16V25A - 25amp 16V Charger - $199.00
TB16V - Turbo Booster - $160.00
(For 3 Post Battery)
12V15A - Voltage Resistor - $49.00
Make battery charging a
breeze! The slim design
of our charge lugs
mount close to the panel
Securely mounts battery vent
protruding only 1/4” and
container to chassis.
are color coded (red +,
black -) for ease in charging. The female lug kit has an easy
connect 5/16” male stud on the back side. The male stud has
a unique twist lock design for more secure connection into the
female lug. Male lug kit has all hardware Includes 20’ (single) 22” (dual) of #4 stranded copper
cable, 8 (single) 12 (dual) crimto make necessary cable connections to
pable lug ends, shrink sleeve,
charger. Sold in complete sets or individ12 chassis mounting clamps
ual units.
and 2 (single) 4 (dual) battery
Speed up engine Complete Set
terminal ends.
installation
and
Single Battery Kit
removal with our Red Male
Starter to Firewall Black Male
Kit.
Red Female
Dual Battery Kit
Battery Vent Mount
JBRC1060 - $15.00
Battery Cable Kit
Firewall
Starter
Disconnect
JBRC5545
$22.00
JBRC5540 $44.00
Black Female
JBRC5541
JBRC5542
JBRC5543
JBRC5544
12.50
12.50
9.50
9.50
JBRC5036 - $59.00
JBRC5037 - $79.00
Charge
Connector
Flush Mount Panel Kit
Give your charge lug installation a professional look with these flush mount kits.
Charge lugs sold above.
Steel Pnl JBRC2026 - $19.00
Fiberglass Pnl JBRC2026A - $39.00
36
mounted in body
Charge connector plug
kit. Positive and negative cables plug in
together. Female connector can be flush
JBRC5573 - $19.00
“In The Race For Quality, There is No Finish Line”
Actuated by
a push/pull
rod, this
quick disconnect power switch mounts to your chassis
with a 4130 .090 moly mounting plate. The
actuating rod is connected to the switch by an
aluminum CNC lever. This kit comes complete
with switch, mounting plate, CNC lever,
push/pull rod, knob and quick pin. Optional
H/D 300 amp switch available.
JBRC1027 - $65.00
JBRC1027HD - $89.00
Dual On/Off Switch Kit
Dual
on/off
switches
attach
to your
chassis
with
4130 .090 moly mounting plates. The
actuating rod is connected to both
switches via aluminum CNC levers and
10/32 rod ends. Specifically designed
for use with 16 volt / 12 volt 3 post batteries.
Overhead Control Panel
On/Off Switches
125 amp
3/8” Stud Terminals
JBRC5513 - $24.00
300 amp
1/2” Stud Terminals
JBRC5514 - $48.00
JBRC1026 - $120.00
JBRC1026HD - $168.00
The JBRC control switch mounting panel is designed to
mount to the overhead roll cage bar. It is designed to
function with fused or unfused applications. For sometime, the hardcore racer has often built his own switch
panel because of the lack of availability of a non-fused
system. This unit comes a heavy duty starter button and
6 (20 amp) toggle switches. If fusing is required, a bolt
in auto fuse panel is supplied. Simple wiring eliminates
printed circuit failures. Constructed of 4130 moly and
powder coated for a durable, attractive finish. Lower
portion of panel DZUS’s apart, easily dropping switch
mounting section from its overhead location for easy
maintenance. When fastened, the unique design locks
the sections securely together. Comes complete with all
control panel wiring and lead cable.
Wiring Harness Kits
At last there is a
Professional wiring kit
available. This kit feature a special MT wire
that has low resistance
with a oil resistant
jacket. Complete
instruction and diagram of how to wire
your car the same way
the complete cars at
JBRC are done. Kit
comes with all wire, grommets,wire ends, cable ends, tie
wraps, wire cable clamps, shrink tubing, terminal strip, strip
mounting tab, battery lugs (2) and special large head rivets
to mount clamps.
Complete Kit JBRC5515 - $269.00
Kit Less Battery Cable JBRC5516 - $219.00
Delay Timer
Our 12 volt delay timer can be set in .01 - 10 seconds of delay
intervals. Commonly used to bring in the 2nd NOS system
and to delay the electric shock changes from the gear change.
For extreme service applications HD timer with digital push
button selections. Comes with complete wiring diagram.
Fused JBRC5510 - $169.00
Nonfused JBRC5511 - $149.00
Timer JBRC5505 - $89.00
HD Timer JBRC5530 - $115.00
Base JBRC5506 - $6.00
Push Button Stretch Cord
Heavy duty 10 amp switch with heavy
gauge industrial strength cord and wire help
eliminate fatigue and wiring failures of lower
quality cords. Ideal for NOS, trans brake
and line lock steering wheel applications.
JBRC5503 - $59.00
The One Stop Chassis Shop
24-hour FAX (636) 356-4667 http:jerrybickel.com
(636) 356-4727
37
stnenopmoC lacirtcelE
On/Off
Switch
Kit
stnenopmoC lacirtcelE
Air Activated Snap Switch
Micro Switch When this
To be used
when your
electrical component needs
to be activated by air. This
switch comes
with a 5/52”
quick release
hose connection and has
NO and NC
terminal connections
JBRC5531
$45.00
Roller Snap
Switch
switch is
depressed,
there is still
travel left in
the button
after switch is
engaged.
Pushing past
the application point
won’t damage
switch.
Roller tip on
actuator arm.
Engagement
arm can be
bent for additional adjustment after
mounting.
Has NO and
NC circuit
connections.
JBRC5508
$15.00
JBRC5524
Miniature
Snap Switch
Roller tip on
actuator arm.
Used when
space is limited. Has NO
and NC circuit
connections.
Mounts to G
Force transmission with
JB-193 tab.
JBRC5523
$8.00
JB-193
$9.50
Starter
Solenoid
This heavy duty solenoid is rated for continuous service and is capable of handling the high
amp loads generated
from high performance
engines and dual 16
volt battery systems.
JBRC5500 - $24.00
Clutch
Operated
Switch
This switch is used to
operate the two-step
RPM limiter and is easily mounted to floor.
The swing arm is completely adjustable. Can
be used as open or closed switch. Wiring harness included.
Single Throw Single Throw Single Throw Push Button
Switch
Switch
Switch
Switch
Push Button
Switch
Used to
power accessories such
as fuel pump,
water pump,
fan and lights.
20 amp rated,
long toggle
lever. Spade
terminal connections.
On/Off plate
and mounting
nuts included.
Used to
power accessories such
as fuel pump,
water pump,
fan and lights.
20 amp rated
short toggle
lever. Spade
terminal connections.
On/Off plate
and mounting
nuts included.
Used to
power accessories such
as fuel pump,
water pump,
fan and lights.
20 amp rated,
short toggle
lever. Screw
fastening connections.
On/Off plate
and mounting
nuts included.
Waterproof
and dust
proof.
Neoprene
cover cap. In
car or under
hood mounting. Rated at
35 amps at
12V.
Compatible
with
JBRC1120
remote mount.
Waterproof
and dust
proof.
Neoprene
cover cap.
Starter switch
used in JBRC
Overhead
Control Panel.
JBRC5535
$12.00
JBRC5536
$9.00
JBRC5537
$9.00
JBRC5526
$12.00
JBRC5539
$14.00
Remote Starter Lenco Switch Mounting Tab
Button Mount
Protector ring
shrouds the button
so it cannot be
pushed accidentally.
JBRC1120 - $13.50
JB-048
JB-072
JB-048 4 speed - $8.50
JB-072 5 speed - $11.50
Switch Sold Separately
Tail Lamp Mount Kit
Our kit makes mounting a bulb behind a tail
lamp lens easy. The bracket bolts or welds to
the tail lamp mounting tubes. Comes complete with bracket, lamp and socket.
JBRC5512 - $13.50
Oil Pressure
Warning Lamp
Relay
Plumbs into oil pressure line at gauge,
red warning lamp
mounted in dash
lights when oil pres- This heavy-duty relay
sure drops below 15 psi or 30 psi.
is rated at 30 amps for
use with 12 volt applications. Can be used
for NOS solenoid, fuel
pumps or any other
Bend this tab to fit your
12-volt requirement.
application. Slide
Mounts thru firewall to insuOptional plug-in base
mounting makes dead
late power wire from suralso available.
nuts adjustments posface, creating an easy way
sible.Can be bolted or
to hook up timing light.
welded.
Relay
JBRC5509 - $89.00
Clutch Switch
Mounting Tab
JB-201 - $12.00
38
JBRC5525-15 - $39.00
JBRC5525-30 - $39.00
Timing Terminal
JBRC5502 - $12.00
JBRC5507 - $13.50
JBRC5507A - $1.00
Base
“In The Race For Quality, There is No Finish Line”
ACD Shift Light Controller
ACD8210 - $249.00
Introducing the
ultimate in delay
boxes, the COMMAND CENTER
Model CC3. In
one small package, the CC3 provides all the electronics
needed to run today,s
sophisticated race cars. JBRC carries a complete line of
Dedenbear products, Call for pricing.
Insulated Stud
Weathertight
Sealed Connectors
Allows isolation of positive cables from body.
Bolts to any surface.
Comes in two sizes.
Large insulator comes
with protective cover
Withstands 250 F temperatures.
Positive locks Click when connectors are joined. Indexed to
prevent mismatching. Comes as
complete male and female kit.
JBRC5550
JBRC5552
JBRC5554
1 pin set $5.00
3 pin set $5.75
6 pin set $7.00
!
W
E
N
Small Insulator
JBRC5551 2 pin set $5.50
JBRC5553 4 pin set $6.50
JBRC5555 pin removal tool $13.00
JBRC5501 - $5.00
Large Insulator
MOR74160 $25.50
Weathertight
Sealed Connector
Kit
Stainless Ground Stud Kit
Everything you need to
do a professional job.
Over 660 pieces with
all necessary tools.
JBRC5560
$199.00
Vibration Mounts
Protect components from
1
Application
2
3
JBRC5504 - $9.00
Welds to chassis. Insures a
positive electrical ground
without corrosion.
Fluid Heating Pad
vibration transmitted thru the
Preheats fluids for optimum perforchassis.
#1
#2
#3
JBRC5546 - $4.00
JBRC5548 - $3.75
JBRC5549 - $4.25
mance. Operates on 110 volt power
supply. 5-1/2” x 7”, adhesive backed.
Super Starters
JBRC5023 - $49.95
Standard Duty Amount
Chevy V8, 90° V6 (153/168 tooth flywheel)
54-10001 $276.25
Chevy V8, Corporate Big Block, Left-Mount
54-10041 335.75
Chevy V8, Pro Stock, 142T flywheel. Left-Mount 54-10057
n/a
Ford V8, .640” offset, SB 1968-up
54-10013 293.25
Ford V8, .490” offset, 429-460 CID
54-10014 293.25
Oldsmobile V8, 350-455 CID
54-10031 310.25
Severe Duty Amount
54-20001 $340.00
54-20041 399.50
54-20057 399.50
54-20013 357.00
54-20014 357.00
54-20031 378.25
The One Stop Chassis Shop
24-hour FAX (636) 356-4667 http:jerrybickel.com
(636) 356-4727
39
stnenopmoC lacirtcelE
The ACD Shift
Light allows you
to trigger a shift
light a a different
RPM for each
shift. The unit
will also automatically switch
to the next chip without
RPM drop. the Shift Light is given a consistent .5 second light pulse for improved shifting consistency. The
shift Light will not come back on in high gear.
smetsyS ataD kapecaR
!
W
E
N
Data Recorders
Two models currently available, the V300 and the V500. they are nearly identical
in features, with the exception of the number of channels they support and the
amount of memory they contain. Both offer
complete integration with the V-Net system, while also supporting a number of hard-wired analog and digital channels
as used on previous generation data recorders. Their compact size and lighter weight is a result of being able to rely
on the microprocessor in the V-Net modules to share some of
the computing workload. Unique to the V series recorders it the ability to also output any information that is gathered over the V-Net line. The
following
chart
details
the indi-
Number of
recording channels
Memory
Sampling rates
V-Series Data Recorders at a Glance
V300
V500
Up to 40 total
Up to 48 total
V-Net
32
Hardwired : 4 digital, 4 analog
1 Mbyte
V-Net channels:
V-Net
32
Hardwired: 8 digital, 8 analog
2 Mbyte (expandable to 4 Mb)
Programmable up to 100 times per second
Digital channels:
RPM and switch contacts are programmable up to 100 times per second
Analog channels:
Output
Internal sensors
(optional)
Weight
Dimensions (H X L X W)
Programmable up to 1000 times per second
All channels monitored on the V-Net are output over the V-net bus
Battery voltage
N/A
Longitudinal G meter
Lateral G meter
10 ounces
17 ounces
1.215” x 3.150” x 3.935”
1.215” x 5.350” x 5.50”
V300 Data Recorder w/DataLink Lite, Download Software Kit $1,395.00
V500 Data Recorder w/DataLink Lite, Download Software Kit $2,495.00
Call for pricing on the
following options
1
2
4
3
5
• Software
• V-net Modules with Sensors
• Gauges
Computer Pickup
Assemblies
The split collar pickup ring clamps
to the pinion yoke providing driveshaft rotation data for on board
computer systems. Holds 1 to 4
magnets.
1 - MAR57646 - Ring & Brkt Lrg Pinion
$57.00
2 - MAR57640 - Ring & Brkt Std Pinion
57.00
3 - MAR57641 - Sensor Bracket only
20.00
4 - JBRC5532-516 - Proximity Sensor (SC-1000) 70.00
4 - JBRC5532-38 - Proximity Sensor (V-Net)
125.00
5 - JBRC5533 - Magnet
5.00
40
• Installation Components
• V-Net Cables
Computer Switch &
Tab
JB-053 Tab - $4.75
JBRC5538 Switch - $10.00
single pole double throw - use for burnout mode
Computer Mounting
Brackets
Mounts computer to chassis.
Has provisions for SC-1000,
4000 and V300-500 series.
Constructed from .050 4130
material. Light weight yet strong.
JB-124B - $24.00 (pr)
“In The Race For Quality, There is No Finish Line”
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement