warning caution - Brother International

warning caution - Brother International
WARNING
Indicates a potentially hazardous
situation which, if not avoided,
could result in serious injuries.
Follow these guidelines to avoid the risk of fire, burns, injury,
rupture, overheating, abnormal odor or smoke.
SISTEMA DE ETIQUETADO
ELECTRÓNICO
User’s Guide
English
Español
Thank you for purchasing Brother's PT-H105. Use your new
PT-H105 to create labels for multiple applications. Select from
the many frames, character sizes, and styles to design beautiful
custom labels. In addition, the variety of Tape Cassette
available allows you to print labels with different widths and
exciting colors.
Please read this guide, including all Precautions, before using
this machine. After reading this guide, keep it in a safe place.
Indicates a potentially hazardous
situation which, if not avoided,
may result in minor or moderate
injuries.
CAUTION
Safety Precautions
• Always use the specified voltage and the recommended AC Adapter (AD-24ESA) for
the label maker to prevent any damage or failure.
• Do not touch the label maker during a lightning storm.
• Do not use the label maker / AC Adapter in places of high humidity (such as
bathrooms).
• Do not overload the power cord.
• Do not place heavy objects on, or damage the power cord or plug. Do not forcibly
bend or pull the power cord. Always hold the AC Adapter carefully when
disconnecting from the power outlet.
• Make sure that the plug is fully inserted in the power outlet. Do not use an outlet that
is loose.
• Do not allow the label maker / AC Adapter / power plug / batteries to get wet, for
example, by handling them with wet hands or spilling beverages on to them.
• Since loss of eyesight may result when leaked fluid from batteries gets into your eyes,
immediately rinse your eyes with a large amount of clean water, and then seek
medical attention.
• Do not disassemble or modify the label maker / AC Adapter / batteries.
• Do not allow a metal object to contact both the plus and minus ends of a battery.
• Do not use sharp objects, such as tweezers or a metallic pen, to change the batteries.
• Do not throw the batteries into fire or expose to heat.
• Disconnect the AC Adapter, remove batteries immediately and stop using the label
maker if you notice abnormal odor, heat, discoloration, deformation or anything
unusual while using or storing it.
• Do not use a damaged or leaking battery as the fluid may get on your hands.
• Do not use a deformed or leaking battery or one whose label is damaged. There is a
possibility of generating heat.
Follow these guidelines to avoid personal injury, liquid
leakage, burns or heat.
• When the label maker is not being used, store it out of the reach of children. In
addition, do not allow children to put the label maker parts or labels in their mouths.
If any object has been swallowed, seek medical attention.
• Do not touch metal parts around the print head immediately after printing.
• Do not touch the cutter blade.
• If leaked fluid from batteries gets on your skin or clothes, immediately rinse them with
clean water.
• Remove the batteries and disconnect the AC Adapter if you do not intend to use the
label maker.
• Do not use a battery other than that specified. Do not use combinations of old and
new batteries or combinations of different types, different charging levels, different
manufacturers or different models. Do not insert a battery with its plus and minus
ends reversed.
• Do not drop or hit the label maker / AC Adapter.
• Do not press on the LCD display.
• Do not put your finger inside the label maker when you close the cassette cover.
• Before using Ni-MH rechargeable batteries, carefully read the instructions for the
batteries and battery charger, and be sure to use them correctly.
• When using Ni-MH rechargeable batteries, charge the batteries with a specialized
battery charger before using the batteries.
• Use a soft wipe to clean the print head; never touch the print head.
• Do not put any foreign objects into the tape exit slot or battery compartment, etc.
• Do not place the label maker / batteries / AC Adapter in direct sunlight or rain, near
heaters or other hot appliances, in any location exposed to extremely high or low
temperatures (e.g., on the dashboard or in the back of your car) or high humidity, or
in dusty locations.
• Do not apply excessive pressure to the cutter lever.
• Do not try to print if the cassette is empty; it will damage the print head.
• Do not pull the tape while printing or feeding; it will damage the tape and the label
maker.
• Any data stored in memory will be lost due to failure or repair of the label maker, or if
the battery expires.
• The label maker is not equipped with a charging feature for rechargeable batteries.
• The length of the printed label may differ from the displayed label length.
• A protective clear plastic sticker is placed over the display during manufacturing and
shipping. This sticker should be removed prior to use.
• When power is disconnected for more than three minutes, all text, format settings and
any text files stored in the memory will be cleared.
3 USING TEMPLATES
Entering Text
Auto Designs
You can enter a maximum of 80 characters, and 50 characters
if using Auto Designs and Deco Mode templates.
To cancel any operation, press
.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
General Precautions
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
Important
• Changes or modifications not expressly approved by Brother Industries,
Ltd. could void the user’s authority to operate the equipment.
• Depending on the location, material, and environmental conditions, the label may
unpeel or become irremovable, the color of the label may change or be transferred
to other objects. Before applying the label, check the environmental conditions and
the material.
• Do not use the label maker in any way or for any purpose not described in this guide.
Doing so may result in accidents or damage the label maker.
• Use only Brother TZe tapes with the label maker. Do not use tapes that do not have
-
(Accent key)
(Accent key) /
/
Example:
[★Category★]
A
Upper case (
ON)
Lower case (
a
C
OFF)
D
c
E
X Creating Two-Line Labels
Use either 0.35" (9mm) or 0.47" (12mm) wide tape for two line text.
a) Enter the first line of text, and then press
. The return
symbol
appears.
b) Enter the text you want in the second line.
LCD display
g
k
n
O
S
T
t
u
Z
y
z
• The order of accented characters varies based on the
language you selected.
.
/
/
[Text Only]
Print Head
3
AC Adapter Jack
Cutter’s
Edge
Toothed
Wheel
Printing Labels
Tape Cutter
Lever
Tape
Exit Slot
Tape Guide
When replacing batteries or Tape
Cassettes, make sure the power is
turned off. This label maker requires six
(6) AAA alkaline batteries or six (6) fullycharged Ni-MH batteries, not included.
NOTE
Visit us at support.brother.com for the latest information
about the recommended batteries.
2
3
4
5
6
27
7
8
18
19
20
LCD
9
10
11
21
22
23
12
13
14
15
Approx. 4.4" × 8.2" × 2.4"
(Approx.110(W) × 208(D) × 59(H)mm)
Weight:
Approx. 0.9 lb. (Approx. 390 g)
(without batteries and Tape Cassette)
Power supply:
Six AAA alkaline batteries (LR03)
Six AAA Ni-MH batteries (HR03)1
Optional AC Adapter (AD-24ESA) (not
included)
Tape cassette:
1
Brother TZe tape (width)
0.13" (3.5mm), 0.23" (6mm),
0.35" (9mm), 0.47" (12mm)
Close the Cassette Cover and gently press
until it clicks into place.
• Make sure that the End of the Tape feeds under
the Tape Guide.
• Use only Brother TZe tapes with this machine.
When using optional AC Adapter (AD-24ESA)
1. Insert the Power Adapter cord into the AC Adapter
Jack on the bottom of the label maker.
2. Insert the Power Adapter into a grounded AC electrical
outlet.
When running a memory backup, we recommend
using both batteries AND the optional Power Adapter,
in the event that one or the other power method fails.
NOTE
CAUTION
X Error message
Low
Battery!
1.
2.
3.
4.
5.
6.
7.
Size
Cursor
Caps
Underline / Frame
Width
Style
Label Length
If a specific label length has been
selected,
also appears.
8.
9.
10.
11.
12.
13.
Guidance (left, right)
Power key
Cursor key : Right
Cursor key : Left
Backspace key
Size key
24
25
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
Style key
Character keys
Caps key
Symbol key
Menu key
Clear key
Print key
Enter key
Auto Designs key
Frame key
Accent key
Space key
Tape Cutter Lever
LCD
For USA Customer Service, call 1-877-BROTHER
(1-877-276-8437)
Fax: 1-901-379-1210
Initial Settings
1
Invalid!
An invalid value was entered as the label length.
(This is not displayed in Auto Designs function.)
• You tried to print a text file when there is no data
stored in the memory.
•
No Text!
• The LCD shows one row of 12 characters; however, the text that
you enter can be up to 80 characters in length.
• While selecting the settings, press the Space key to go back to
the default item.
• The print preview is a generated image of the label, and may
differ from the actual label when printed.
• Label length shown on LCD may slightly differ from the actual
label length when printed.
• You tried to enter a 3rd line by pressing
No
Cassette!
There is no cassette installed.
Cutter
Error
The Tape Cutter Lever was used during the printing
process.
Text Full!
The maximum number of characters (80 characters*)
have already been entered.
*50 characters - for Auto Designs function and Deco
Mode
Text Limit!
language)]
3
Set the unit of measurement.
The default setting is [inch].
/
/
No Frame OK?
• Select
cancel.
to print with no Frame,
to
Feeding tape after printing when [Chain Print] is
OK to Feed? selected. Refer to the Setting Margins section of this
guide.
[Unit]
[inch / mm]
With the Deco Mode function:
Since the number of entered characters exceeds the
label length, reduce the text.
All other functions:
Since the number of entered characters exceeds the
label length, reduce the text, or select [Auto] as the
label length.
• Printing on 0.13" (3.5mm) tape with invalid Frame
setting ON.
.
.
NOTE
• The machine automatically turns off if no keys are pressed within
five minutes.
• To cancel any operation, press
.
Insert
0.47"
Only 0.47"(12mm) tapes can be used with the Deco
Mode function.
Wrong Tape! Use a Tape Cassette with the
mark.
The display stays blank
after you have turned on
the machine.
/
Pets
Flower
Kitchen
Space
Business
Surprise!
• If the text length exceeds the label length you have set, text may
not print completely. (Only for Deco Mode function)
• The template designs cannot be edited.
• Only the highlighted symbols in “Symbol Key” can be used in Deco Mode.
• When you access Deco Mode or Auto Designs, your most recent label
created with a template opens automatically.
to return to the previous step.
Solution
• Check that the cassette is inserted
The machine does not
correctly.
print, or the printed
• If the cassette is empty, replace it.
characters are not formed
• Check the Tape Cassette Cover is closed
properly.
correctly.
The setting has cleared
on its own.
A blank horizontal line
appears through the
printed label.
• The batteries may be weak. Replace
them.
• When power is disconnected for more
than three minutes, all text and formats in
the display settings are cleared.
• There may be some dust on the Print
Head. Remove the Tape Cassette and
use a dry cotton swab to gently wipe the
Print Head with an up-and-down motion.
The machine has “locked
up” (i.e., nothing happens
• Refer to the Resetting the Label Maker
when a key is pressed,
section in this guide.
even though the machine
is on.)
• The batteries may be weak. Replace
The power turns off when them.
• Check that the batteries are correctly
you try to print.
inserted.
• Check that the end of the tape feeds
under the tape guides. Refer to the
Installing Power Supply and Tape
The tape does not feed
Cassette section in this guide for an
properly or the tape gets
example.
stuck inside the machine. • The Cutter Lever is used while printing.
Do not touch the Cutter Lever during
printing.
• This function feeds approximately 1" (25mm) of blank tape.
• Do not pull the tape, as this may damage the Tape Cassette.
• Press
To change language
setting.
• Refer to the Initial Settings section in this
guide.
and select [Text&Format].
[File]
/
/
[Print]
X Printing
/
/
• If you need only one copy of the label, press
after you
press
.
• Press a number key to specify the number of copies you wish
to print.
• DO NOT touch the Tape Cutter Lever while the message
"Printing..." or "Feeding..." appears on the LCD.
• To cut the label, push the Tape Cutter Lever.
• To remove tape backing, fold the tape lengthwise (with the
text facing inward), to expose the inside edges that run down
the center of the tape backing. Peel and apply.
• You can print up to nine copies of each label.
Off
4
7
2
5
8
3
6
9
/
[Full / Half / Narrow / Chain Print]
/
/
[Save]
[Full] / [Half] / [Narrow]
Use one of these options to customize margin length before and
after your text.
The printed dots (:) indicate the end of the label. Cut along the
printed dots (:) with scissors.
LCD display
[File]
/
[Open]
ABC
Full
Font Keys
NOTE
When saving a file, if you reuse a number that is already assigned
to another file, [Overwrite OK?] appears on the LCD. To
overwrite the previously-saved file, press
1
. To cancel without
Press
settings.
or
AD-24ESA
Cutter Unit:
TC-4 (replacement)
2
/
or
or
Size
X Replacing the Cutter Unit
+
Medium
Small
Style
Normal
Bold
Outline
Shadow
Cutter
Board
Italic
to start printing.
5. When "OK to Feed?" appears on the LCD, press
to change the text.
6. Clear the text, enter the text you want on the next label,
and then press
.
7. After your last label prints, when "OK to Feed?" appears
on the LCD, press
.
• When [Half] or [Narrow] is set, the displayed label length is the
length from the printed dots ( ) to the end of the label.
• To print more than one copy of a label with minimum margin, set
the margin to [Narrow].
11
6
12
• To exit a template and return to the text entry screen, press
/
until [Cancel] appears on the LCD, wait a few seconds, the then press
when [Print] appears on the LCD.
• Deco Mode templates can be used ONLY with 0.47"(12mm)
Tape Cassettes.
• The maximum label length is 7.8" (200mm) for Deco Mode.
• Press
to return to the [Auto] setting for “Label Length” mode.
• When “Label Length” is set to [Auto], the label length adjusts to
fit your text.
ABC
159
159
/
[Copies: 1]
ABC
159
[Cable]
/
/
-
+
+
to select text
Symbol Key
Press
to select a symbol.
Basic
To enter Basic symbols:
/
[Basic]
/
(Choose a symbol)
(Select an item)
1
2
3
4
5
6
7
8
9
10
I+Outline
1"
(25 mm)
want of this text.
5
11
ABC
2. Press
. [Copies: ] appears on the LCD.
3. Press the number keys to enter the number of copies you
10
NOTE
to go through all available
Large
direction of the arrows as illustrated below 2.
2. Install a new Cutter Unit. Push it in gently until it snaps into place.
12
I+Shadow
[Chain Print]
Use this option to print multiple different labels with narrow
margins. This option saves tape.
1. Enter your text.
4. Press
/
or
I+Bold
Narrow
4
Basic Symbols
Press
/
settings.
If the cutter blade becomes blunt after repetitive use and the tape cannot
be cut cleanly, turn around the cutter board as shown in the illustration 1.
If you still have the difficulties, replace with new cutter unit (stock no.
TC-4) by obtaining from an authorized Brother reseller.
ABC
9
Only the highlighted symbols can be used in Deco Mode.
See the included Supplies and Accessories Guide.
AC Adapter:
1.6"
(41 mm)
3
/
.
2.7"
(67 mm)
Half
8
4 FORMATTING KEYS
1. Remove the two sections of the Cutter Unit (green) in the
Label image
2
• We recommend using Flexible ID Tape for labels attached to
cables and wires.
• Depending on the format you select, the entire contents of your
text may not be printed.
/
Tape Cassettes:
7
Frames cannot be printed on 0.13" (3.5mm) tape.
[File]
Supplies and Accessories
[Margin]
1
[Print OK?]
X Opening a saved file
saving, press
[Print]
(Enter text) ABC
NOTE
X Setting Margins
/
(Select a frame)
/
-
[Auto / 1.2"-7.8"(30-200mm)]
Cable Flag
-
X Saving a new file
/
NOTE
All text and format
settings need to be
cleared to create a new
label.
/
/
[Copies: ]
(Enter text) ABCDEF
/
Use this function to create a label that can
be wrapped around a cable or wire with its
ends applied together to form a flag. We
recommend using Brother Flexible ID tape
when wrapping.
Refer to the insertion sheet included with
Flexible ID tape about the recommended
conditions for use.
to select a frame design.
1
/
[Feed]
[Copies: 1]
Press
X Printing a saved file
to exit Preview mode.
/
• Check that the batteries are correctly
inserted.
• The batteries may be weak. Replace
them.
When the label is printed • Refer to the Setting Margins section in
out, there is too much
this guide and select [Half] , [Narrow], or
[Chain Print] to have smaller margins
margin (space) on both
for your label.
sides of the text.
.
0.13" (3.5mm) or 0.23" (6 mm) tape is installed. Install
a larger tape size.
The default setting is [English].
NOTE
was pressed when no text was entered while
using the Deco Mode or Auto Designs function.
Line Limit! • You tried to print or preview two lines of text while
.
/
[Language]
/
[English / Español / Français / (Select
is pressed when no text is entered.
• You tried to select Preview or Cable Flag when no
text is entered.
•
Turn your machine on.
Set the language.
Problem
The installed batteries are running low and need to be
replaced for continued operation.
Supply power by using six AAA batteries, and then press
2
Cause / Remedy
The batteries are weak.
If using AAA alkaline batteries, replace them with new
ones.
If using Ni-MH batteries, charge them fully.
Battery
Dead
For FAQs, Troubleshooting, and manuals, visit
support.brother.com.
To order supplies and accessories, visit
www.brothermall.com or call 1-877-552-6255.
X What to do when...
Message
Visit us at support.brother.com for the latest information about
the recommended batteries.
If you have questions or need information about your
Brother product, please visit us online or call.
16
17
[Preview]
X Feeding (Tape Feed)
Troubleshooting
Specifications
Dimensions:
(W x D x H)
• Press
Insert the Tape Cassette following the
drawing marked inside the case. Gently
press the Cassette into the label maker
until it clicks into place.
USING A COMBINATION OF DIFFERENT
BATTERIES (SUCH AS ALKALINE WITH Ni-MH)
MAY RESULT IN AN EXPLOSION. DISPOSE
OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
1
Fashion
Frame Key
Saving Label Files
You can save and reuse the text and settings for up to nine
different labels. Each label holds up to 80 characters (including
spaces). Assign a number (1-9) to each saved file so you can
reuse it, and edit or overwrite stored files as needed.
X Preview
/
26
People
4
Tape Cassette
[Design X] (X:1-12)
NOTE
• After printing a label, cut along the printed dots (:) with scissors
so the label length matches the machine setting.
• The lock symbol
appears when you set a specific label
length.
[Text&Format]
• Pressing the Preview key displays a preview of the tape, and
may differ from the actual one when printed.
LCD Display & Keyboard
Sports
• Press
End of Tape
With the LCD facing down, open the
Cassette Cover by pressing the grooved
tab and pushing in the direction of the
arrow, as illustrated.
Congrats
[Auto / 1.2"-12.0" (30-300 mm)]
NOTE
To delete all text and settings:
[Deco mode]
[Label Length]
Installing Power Supply and Tape Cassette
2
[Print]
X Changing Label Length
To delete individual letters and spaces, press
To delete all text:
1 GETTING STARTED
Cassette
Cover
/
If you choose [Surprise!], the PT-H105 selects a frame, style,
and pictographs for you.
i
l
r
s
Example:
[Label Length]
o
Y
X Clearing Text and Settings
/
I
L
R
Use Deco Mode templates to create labels with different text formats.
[Pets]
/
[★Input text ★](Enter text) Rusty's Food
d
e
G
K
N
U
Label image
/
1
Deco Mode
Use these templates to create decorative labels using your own text.
Select the template name to use the labels shown in the table below.
X Entering Accented Characters
X Switching Upper Case / Lower Case
Federal Communications Commission (FCC)
Compliance Notice (For USA Only)
the
mark.
• Only use a soft, dry cloth to clean the label maker never use alcohol or other organic
solvents.
Printed in China
D00RHZ001
2 BASIC USAGE
13
Vertical
14
Width
Do not touch the Cutter Blade directly with your fingers.
Normal
+
and then press
2
First release
Shortcuts
and
.
Label Length
Margin
• Remove the batteries if you do not intend to use the
label maker for an extended period of time.
• Dispose of batteries at an appropriate collection point,
not in the general waste stream. Be sure to observe all
applicable federal, state, and local regulations.
• When storing or discarding a battery, wrap it with
cellophane tape to prevent it from short-circuiting
(see illustration).
2
/
(Select
(Choose a symbol)
1
2
3
4
5
6
7
8
A
B
C
File
CAUTION
/
Pictograph Symbols
The label maker turns on with the internal memory reset.
1. Cellophane tape
2. Alkaline or Ni-MH battery
[Pictograph]
The selected symbol is displayed as "A1" in the LCD.
For example, a car
is displayed as
in the screen.
Width
and
to turn the label maker back on.
, and then release
/
category)
Reset the label maker when you want to initialize the settings, or in
the event it is not working properly. Resetting clears all the text,
settings, and stored files.
Turn off the label maker, hold down
Pictograph
To enter Pictograph symbols:
× 1/2
Resetting the Label Maker
1
×2
Cable
D
E
Deco Mode
F
Preview
G
Feed
H
Unit
I
J
Language
K
L
1
To print all pictographs :
/
OK?]
[Print List]
[Print
9
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement