JEM ZR25 - Lightmoves

JEM ZR25
The JEM™ ZR25 is a small, yet powerful fog machine designed to
deliver superior and uninterrupted performance in demanding
professional applications. Via its 1,150 W heat exchanger, the JEM
ZR25 produces large amounts of fog ideal for small to medium-sized
venues and stages in both install and rental markets.
The JEM ZR25 features variable output control for more subtle effects
and is fully up-to-date with digital remote, DMX and RDM.
The entire JEM ZR range is compatible with a wide range of JEM Pro
fog fluids. As machines designed and built to last, the JEM ZRs will
continue to perform with great output and low consumption.
Small but powerful fog machine
Exceptional performance and output for its size
G A L L E R Y
Simple plug-and-play operation via remote control or DMX
F E A T U R E S
•
1,150 W heat exchanger
•
40 ml in 30 seconds peak performance
•
600 m³/min fog output
•
Variable output control for subtle effects
•
7-8 minute warm-up time
•
Digital remote, DMX and RDM
•
Compatible with a wide range of JEM Pro fog fluids
•
Floor standing or truss mounting (bracket included)
•
PowerCON TRUE1
•
2.5-liter bottle
T E CHNI CA L
S P E CI F I CA T I O NS
Physical
Length: 485 mm (19.1 in.)
Width: 335 mm (13.2 in.)
Height: 242 mm (9.6 in.)
Height with hanging bracket: 333 mm (13.2 in.)
Weight, dry: 11.2 kg (24.7 lbs.)
Weight, filled: 13.7 kg (30.2 lbs.)
Performance
Coverage volume: 600 m3 (21,189 ft3 ) per minute
Fluid consumption (max.): 100 ml per minute
Continuous effect output
Ready time: 7 minutes
Supplied by:
Control and Programming
Control options: Integrated digital remote control, DMX, master/slave link mode,
optional PLC interface
Control parameters: Continuous or timer-controlled output
Fog: Variable output control, 0-100%
DMX channels: 1
External fluid control: Fluid sensing
DMX compliance: ANSI E1.11 - USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20 RDM
Construction
Housing: Steel and aluminum
Hanging bracket: Integrated yoke with safety attachment point
Color: Black
©2015 Martin Professional Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice

Heat exchanger: 1150 W, thermally protected
Fluid pump: Oscillating piston, high pressure
Fluid management: Fluid out sensing, sealed for transportation
Fluid reservoir: 2.5 l drop-in reservoir with quick-connect fitting
External fluid control: Fluid sensing
Remote control: Integrated digital remote with 3 m cable, 3-pin XLR connector
Installation
Mounting: Standing or hanging
Orientation: Up to +/-40° from horizontal
Clearance around machine: 100 mm (4 in.)
Connections
AC power: Neutrik PowerCON TRUE1
DMX and link mode in/out: 5-pin locking XLR
Remote control: 3-pin locking XLR
Firmware: AVR socket
Optional PLC interface: 3- and 4-pin locking XLR
Electrical
EU model:
AC power: 220-240 V nominal, 50/60 Hz
Main fuse: 6.3 AT (slow blow), 250 V
Typical power and current: 1200 W, 5.3 A*
US model:
AC power: 100-130 V nominal, 50/60 Hz
Main fuse: 10 AT (slow blow), 125 V
Typical power and current: 1050 W, 8.8 A*
*Measurements made at nominal voltage. Allow for a deviation of +/- 10%.:
Thermal
Maximum ambient temperature (Ta max.): 40° C (104° F)
Exterior surface temperature, steady state: 30° C (86° F)
Max. nozzle temperature: 290° C (554° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Approvals
EU model
EU safety: EN 60 335-1+A15, EN62233
EU EMC: EN 61000-6-3
EU immunity: EN 61000-6-1
Australia/NZ (pending): RCM
US model
US safety: UL 998
Canadian safety: CSA C.22.2 No. 104.01
Included Items
Fluid reservoir, 2.5 l: P/N 34300521
JEM™ ZR Series Digital Remote Control: P/N 92765048
Power input cable, EU, PowerCON TRUE1, stripped ends, 3 m (9.8 ft.): P/N 11501043
Power input cable, US, 10 A, PowerCON TRUE1, molded NEMA 5-15P, 3 m (9.8 ft.): P/N
11501044
Accessories
JEM™ ZR25 Ducting System with 5 m (16.4 ft.) 4" flexible ducting: P/N 92625012
JEM™ ZR Series PLC Interface: P/N 92765049
Approved fluids
JEM™ Pro Smoke Studio
JEM™ Pro Smoke Super
JEM™ Pro Smoke High Density
JEM™ I-Fog Fluid
RUSH™ Fog Fluid
JEM™ Pro Clean Supreme
Various sizes available - contact your dealer or see 'Fluids' product pages for details
Installation hardware
G-clamp: P/N 91602003
Half-coupler clamp: P/N 91602005
Quick trigger clamp: P/N 91602007
Safety cable, SWL 60 kg, BGV C1/ DGUV 17, black: P/N 91604006
Service tools
Epsilon 5 AVR Programmer: P/N 50502004
Temperature Calibration Box: P/N 92620005
Ordering Information
JEM™ ZR25, EU: P/N 92215320
JEM™ ZR25, US: P/N 92215330
©2015 Martin Professional Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement