maestrale 10 under cabinet range hood

maestrale 10 under cabinet range hood
MAESTRALE 10
UNDER CABINET RANGE HOOD
A NEW CHOICE IN PROFESSIONAL UNDER CABINET HOODS. The new Maestrale by Faber is a 10" tall , 23" deep under cabinet wall hood
with a 600 CFM Pro all metal blower housing and impellers. With baffle style grease filters, top or direct rear venting, welded, wrapped and polished corners and
a 3 speed control, this unbranded hood can be mixed and matched with any cooking brand.
AVAILABLE MODELS
Model #
Size / Color
MAES3010SS600-B
30 Stainless
Motor Class (CFM) Sound Levels (sones)
600 CFM
2.8 - 7.5 sones
MAES3610SS600-B
36 Stainless
600 CFM
2.8 - 7.5 sones
MAES4210SS600-B
42 Stainless
600 CFM
2.8 - 7.5 sones
KEY FEATURES
Pro Motor
Adjustable Mounting Hardware
Direct Rear Venting
Baffle Grease Filters
The motor in this hood is surrounded
in metal with all metal impellers for top
performance
Wall brackets are adjustable once the
hood is hung to insure a perfect level
installation
Vent the ducting up or rotate the blower
to the back to avoid extra duct work when
on an outside wall
Dishwasher safe SS metal filters capture
grease and allow for easy clean up in the
dishwasher
MAESTRALE 10
UNDER CABINET RANGE HOOD
SPECIFICATIONS
DIMENSIONS
depth / height
convertible to ductless /
recirculating
controls
23" d / 10" h
lighting
2 (30") or 3 (36", 48") x 5 (w) led
ducting top / rear (back)
6" round (top or back)
grease filters
dishwasher safe stainless steel baffle
pro motor with metal impellers
yes
ac power
350 watts / 2.9 amps
yes – kit sold separately
3 speed slider w/ led indicator
Front View
PERFORMANCE
CFM
SPEED
1
180
2
380
3
560
Sones
2.8
4.5
7.5
ACCESSORIES
# MUDAMPER6 / MUDAMPER8 –
Universal Make-Up Air Damper
Satisfies make-up air requirements, this kit uses an air switch to activate the makeup air damper to open and bring fresh air into the home when the hood fan is on.
It then closes tightly when the hood is off. The CFM level is not reduced with this
accessory.
Side View
# DUCTGRT30 / DUCTGRT36 –
Ductless Vent Grate Kit
A 4” tall stainless steel vent grate which is installed between the hood & the cabinet
to recirculate the air back into the kitchen when ducting outside isn’t possible.
Includes the vent grate and hardware.
# FILTER1 –
Replacement Charcoal Filter Kit
High quality charcoal filter for use when recirculating the air back into
the kitchen. Filters out odor and should be replaced every 6 months
# TELEMAES
Telescopic Chimney Cover
24” wide, extends to accomodate 8 - 9 foot ceilings
# FULL30 / FULL36 / FULL42
Full Width Duct Cover
12” high, extends full width of the hood
# CFMRED
CFM Reducer Kit
For use in make up air environments where an under 300 cfm hood is required. This
kit reduces the ducting to 5” round and reduces the cfm to under 300.
WARNING! Product specifications are subject to change without
notification. Consult the installation instructions before you begin
installing this range hood
Rev. 4/17
2 Cabot Road Hudson, MA 01749 • TEL: (508) 358-5353 • E-Mail: [email protected] www.faberonline.com
Imagined in Italy
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement