PGX Wireless User Guide
Shure PGX Wireless User Guide
4
PGX Wireless
User Guide
ENGLISH
Shure PGX Wireless
The New Breed of Shure Wireless Systems
Created for active musicians and presenters who also manage their own
sound, Shure PGX Wireless improves your performance and simplifies your
setup.
Innovations such as automatic frequency selection and automatic
transmitter setup make wireless quicker and completely worry free. PGX
systems now feature Shure’s patented Audio Reference Companding,
delivering the crystal clear sound quality that pro audio engineers trust.
PGX gives you 9 systems to choose from and tour-tested wireless for
guitars, instruments, and vocal mics — including the legendary SM58® vocal
microphones. It’s the best-sounding, simplest choice in wireless, from the
leader in live performance sound.
Table of Contents
System Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
PGX4 Receiver Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
PGX2 Handheld Transmitter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Changing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Adjusting Gain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
PGX1 Bodypack Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Wearing the Bodypack Transmitter. . . . . . . . . . . . . . . . . . . . . . . . . . .5
Changing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Adjusting Gain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Single System Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Multiple System Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Manual Frequency Selection (receiver only). . . . . . . . . . . . . . . . . . . .7
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Locking and Unlocking Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Patent numbers 6,597,301, 5,794,125, and 5,692,057.
1
SHURE PGX WIRELESS
System Components
All systems include
•
•
•
•
PGX4 receiver
2 AA batteries
Power supply
User guide
Vocalist systems include
• Microphone Head (choice of PG58, SM58®, SM86, or Beta 58A®)
• PGX2 handheld transmitter
• Microphone clip
Lavalier, Headworn, and Instrument systems include
• PGX1 bodypack transmitter
• Microphone (choice of WL93, WL185, PG30 or Beta 98H/C™)
Guitar systems include
• PGX1 bodypack transmitter
• 1/4” to mini 4-pin guitar cable
2
ENGLISH
PGX4 Receiver Features
Front Panel
audio LED
ready LED
Indicates strength of
incoming audio signal: green
for normal, amber for strong,
red for peak.
Green light indicates system is
ready for use.
Infrared (IR) port
Broadcasts IR signal to transmitter.
LED screen
See “Single System Setup” on
page 6.
channel button
sync button
Press to synchronize transmitter
and receiver frequencies.
See “Single System Setup” on
page 6.
Back Panel
AC adapter jack
Adapter cord tie-off
XLR balanced microphone output jack
1/4” unbalanced output jack
3
SHURE PGX WIRELESS
PGX2 Handheld Transmitter
PGX
Power / Infrared (IR) / Mute indicator
Green Ready
Flashing green Controls locked (see page 8)
Amber Mute on
Flashing red IR transmission in process
Glowing red Battery power low
Pulsing red on Batteries dead (transmitter cannot be turned on
startup until batteries are changed)
Pulsing red after Transmitter and receiver incompatible; contact
synchronization your Shure reseller
On-off / mute switch
Press and hold to turn on or off. Press and release to mute or unmute.
IR port
Receives infrared beam to synchronize frequencies. When using multiple
systems, only one transmitter IR port should be exposed at a time.
Changing Batteries
• Expected life for alkaline batteries is approximately
8 hours.
• When the transmitter light glows red, the batteries should
be replaced immediately, as shown on the right.
Adjusting Gain
• Access the gain adjustment switch by unscrewing the
head of the microphone.
• Two gain settings are available on the PGX2. Use
the tip of a pen or a small screwdriver to move the
switch.
•
•
0dB: For quiet to normal vocal performance.
–10dB: Use only if audio is distorted due to
high vocal levels.
PGX
BIAS
AUDIO
0dB
4
-10dB
ENGLISH
PGX1 Bodypack Transmitter
PGX1
Power / Infrared (IR) / Mute indicator
Green Ready
Flashing green Controls locked (see page 8)
Amber Mute on
Flashing red IR transmission in process
Glowing red Battery power low (transmitter cannot be turned
off until batteries are changed)
Pulsing red on Batteries dead (transmitter cannot be turned on
startup until batteries are changed)
Pulsing red after Transmitter and receiver incompatible; contact
synchronization your Shure reseller
On-off / mute switch
Press and hold to turn on or off. Press and release to mute or unmute.
4-Pin Microphone Input Jack
IR port
Receives infrared beam to synchronize frequencies. When using
multiple systems, only one transmitter IR port should be exposed at
a time.
Gain adjustment switch (see below)
Wearing the Bodypack Transmitter
• Clip the transmitter to a belt or slide a guitar strap
through the transmitter clip as shown. If using a
belt, slide the transmitter until the belt is pressed
against the base of the clip.
Changing Batteries
• Expected life for alkaline batteries is approximately 8 hours.
• When the transmitter light glows red, the batteries should be replaced immediately,
as illustrated.
PGX
1
Adjusting Gain
• Three gain settings are available on the PGX1:
•
mic: Microphone
•
0: Guitar
•
-10: Use only if audio is distorted due to high input level
5
SHURE PGX WIRELESS
Single System Setup
In any wireless setup, each transmitter and receiver pair must be tuned to
the same frequency, or channel. The PGX wireless system uses automatic
transmitter setup to synchronize the transmitter and receiver channels.
Note: transmitting devices such as cellular phones and two-way radios, and
digital devices such as CD players and effects processors, may interfere with
wireless audio transmissions. Keep your PGX transmitters and receivers
away from these and other potential sources of interference.
Single System Setup
1. Automatic Frequency Selection
Press and release the channel button. This scans for a clear channel and
sets the receiver to that channel.
press channel button
to scan for a clear
channel
LED screen displays
current channel
channel
system scans for
clearest available
channel
2. Automatic Transmitter Setup
Turn On the transmitter.
Open the transmitter battery compartment to display the infrared (IR) port
(see pages 4 and 5).
With the transmitter IR port exposed to the receiver, press sync.
sync
audio
channel
sync
select
ready
.)
8 in
m(
5c
<1
or
Hold the sync button until the red light stops flashing on both receiver and
transmitter.
When the receiver ready light glows, the system is ready for use. Close the
transmitter battery compartment.
6
ENGLISH
Multiple System Setup
See the included
frequency and
channel guide
for information
on compatible
channels.
Multiple system setups require the use of groups and channels. In the
LED panel, the left digit indicates the current group; the right digit indicates the current channel.
right digit is channel
left digit is group
Follow these steps when using multiple PGX systems in a single installation:
1.
Turn all receivers on and all transmitters off.
2.
Make sure the group number is the same for all receivers. If necessary, use Manual Frequency Selection (shown below) to set all
receivers to a single group.
3.
Perform Automatic Frequency Selection on the first receiver
(see page 6).
4.
Turn on the first transmitter.
5.
Perform Automatic Transmitter Setup (see page 6).
Leave the transmitter turned on. Repeat for each system.
Be sure that only one transmitter’s IR port is exposed when
synchronizing a system.
Manual Frequency Selection (receiver only)
To manually select a group or a channel, press and hold the channel button.
The display alternates between the group number and the channel number.
hold channel
button
Releasing the channel button while either number is displayed makes the
displayed number flash.
Pressing the channel button while either number is flashing increases the
setting by one.
to change the group
value, release the
channel button while
the first digit displays...
...then press the
channel button
to increase the
value.
to change the channel
value, release the
channel button while the
second digit displays...
...then press the
channel button
to increase the
value.
To activate a newly selected group or channel, simply wait until the number
stops flashing.
7
SHURE PGX WIRELESS
Troubleshooting
Issue
Indicator Status Solution
No sound or faint
sound
Transmitter power
light on, receiver
LEDs on
• Perform automatic transmitter setup (see page 6)
• Verify all sound system connections
Receiver LED off
• Make sure AC adapter is securely plugged into electrical outlet
and into DC input connector on rear panel of receiver
• Make sure AC electrical outlet works and is supplying proper
voltage
Transmitter power
light glowing or
flashing red
• Replace transmitter batteries
• If indicator continues flashing red after batteries are replaced, the
transmitter and receiver may be from incompatible frequency
bands. Contact your Shure reseller for assistance.
Transmitter power
light off
• Turn on transmitter
• Make sure the +/– indicators on batteries match the transmitter
terminals
• Insert fresh batteries
Distortion or
unwanted noise
bursts
Distortion level
increases
gradually
• Remove nearby sources of RF interference (CD players,
computers, digital effects, in-ear monitor systems, etc.)
• Change receiver and transmitter to a different frequency
• Reduce transmitter gain
• Replace transmitter batteries
• If using multiple systems, change the frequency of one of the
active systems
Transmitter power
light glowing or
flashing red
Sound level
different from
cabled guitar or
microphone, or
when using
different guitars
Cannot turn
transmitter on
• Replace transmitter batteries
• Adjust transmitter gain as necessary
Transmitter light
flashing red
• Replace transmitter batteries
Locking and Unlocking Controls
Locking the system controls prevents accidental muting or channel adjustment during performance.
Transmitter
To lock the controls: with the transmitter off, hold the power
until the green LED flashes (± 5 seconds).
To unlock the controls: with the transmitter on, hold the power
down until the green LED flashes (± 5 seconds).
button down
button
Receiver
To lock the channel: hold the channel button until the numbers flash
(± 10 seconds).
To unlock the channel: hold the channel button until the numbers flash
(± 5 seconds).
8
ENGLISH
Specifications
System
Working Range
100m (300 ft.)
Note: actual range depends on RF signal absorption,
reflection, and interference
Audio Frequency Response
+/– 2 dB
Minimum: 45 Hz
Maximum: 15 kHz
(Overall system frequency depends on microphone element.)
Total Harmonic Distortion
0.5%, typical
Ref. +/– 33 kHz deviation, 1 kHz
tone
PGX1
Dynamic Range
>100 dB A-weighted
Operating Temperature
Range
–18°C (0°F) to +50°C (+122°F)
Transmitter Audio Polarity
Positive pressure on microphone diaphragm (or positive
voltage applied to tip of WA302 phone plug) produces positive
voltage on pin 2 (with respect to pin 3 of low impedance output)
and the tip of the high impedance 1/4-inch output.
Audio Input Level
–10 dBV maximum at "mic" gain position
+10 dBV maximum at 0dB gain position
+20 dBV maximum at –10dB gain position
Bodypack
Transmitter
Gain Adjustment Range
30 dB
Input Impedance
1 M
RF Transmitter Output
30 mW maximum (dependent on applicable country
regulations)
Dimensions
108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
Weight
81 grams (3 oz.) without batteries
Housing
Molded polycarbonate case
Power Requirements
2 “AA” size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
Audio Input Level
+2 dBV maximum at –10dB position
–8 dBV maximum at 0dB position
PGX1
PGX2
Handheld
Transmitter
PGX
Note: battery characteristics may limit this range
Gain Adjustment Range
10dB
RF Transmitter Output
30 mW maximum (dependent on applicable country
regulations)
Dimensions
254 mm x 51 mm dia. (10 x 2 in.)
including SM58 cartridge
Weight
290 grams (10.2 oz.) without batteries
Housing
Molded PC/ABS handle and battery cup
Power Requirements
2 “AA” size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
PGX4
Dimensions
40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)
Receiver
Weight
327 g (11.5 oz.)
Housing
ABS
Audio Output Level
XLR connector (into 600  load): –19 dBV
1/4 inch connector (into 3000  load): –5 dBV
sync
audio
channel
select
ready
Ref. +/– 33 kHz deviation with 1
kHz tone
Output Impedance
XLR connector: 200 
1/4 inch connector: 1k
XLR output
Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
Sensitivity
–105 dBm for 12 dB SINAD, typical
Image Rejection
>70 dB, typical
Power Requirements
12–18 Vdc at 150 mA, supplied by external power supply
9
SHURE PGX WIRELESS
Replacement Parts
All Systems
SystemSpecific
Optional
Accessories
Microphone Stand Adapter (PGX2)
WA371
Carrying Case
94B8429
AC Adapter (120 VAC, 60 HZ)
PS21
AC Adapter (220 VAC, 50 Hz, Argentina)
PS21AR
AC Adapter (230 VAC, 50/60 Hz, Europlug)
PS21E
AC Adapter (230 VAC, 50/60 Hz, UK)
PS21UK
AC Adapter (100 VAC, 50/60 Hz)
PS21J
AC Adapter (220 VAC, 50 Hz, China)
PS21CHN
PG58 Head with Grille
RPW108
SM58 Head with Grille (PGX2/SM58)
RPW112
SM86 Head with Grille (PGX2/SM86)
RPW114
BETA 58 Head with Grille (PGX2/BETA 58)
RPW118
Matte Silver Grille (PGX2/SM58)
RK143G
Matte Silver Grille (PGX2/SM86)
RPM226
Matte Silver Grille (PGX2/BETA 58)
RK265G
Belt Clip
44A8030
Black Grille (PGX2/BETA 58)
RK323G
Zipper Bag (PGX1)
26A13
Zipper Bag (PGX2)
26A14
Universal Rack Tray
URT
10
ENGLISH
Regulatory and Licensing Information
PGX1 & PGX2 Transmitters:
Changes or modifications not expressly approved by Shure Incorporated
could void your authority to operate the equipment.
Certified under FCC Parts 74 (FCC ID: "DD4SLX1" & "DD4SLX2"). Certified
by IC in Canada under RSS-123 and RSS-102 ("IC: 616A-SLX1" and "IC:
616A-SLX2"). Meets the essential requirements of the European R&TTE Directive 99/5/EC (ETSI EN 300-422 Parts 1 & 2, EN 301 489 Parts 1 & 9) and
is eligible to carry the CE marking.
PGX4 Receiver:
Authorized under the Declaration Of Conformity provision of FCC Part 15B.
Certified under Industry Canada to RSS-123 ("IC: 616A-PGX4"). Meets the
essential requirements of the European R&TTE Directive 99/5/EC (EN 301
489 Parts 1 & 2, EN 300 422 Parts 1 & 2) and is eligible to carry the CE marking.
PS 21 Series Power Supplies:
Conforms to Safety Standard IEC 60065. PS21E and PS21UK are eligible to
bear CE marking.
PS21AR: Conforms to Safety Standard IEC 60065. Certified TÜV Rheinland, Argentina S.A., No. RA2681022.
A ministerial license may be required to operate this equipment in certain areas. Consult your national authority for possible requirements.
This radio equipment is intended for use in musical professional entertainment and similar applications.
Les transmetteurs modèle Shure PGX1 et PGX2 :
Tout changement ou modification n’ayant pas fait l’objet d’une autorisation expresse de Shure Incorporated peut entraîner la nullité dudroit d’utilisation de l’équipement.
Certifié sous FCC partie 74 (FCC ID : « DD4SLX1 » et « DD4SLX2 »).
Certifié par IC au Canada sous RSS-123 et RSS-102 (« IC : 616A-SLX1 »
et « IC: 616A-SLX2 »). Conforme aux exigences essentielles de la directive
européenne R&TTE 99/5/CE (ETSI EN 300 422, partie 1 et 2, ETSI EN 301
489, partie 1 et 9) et sont autorisés à porter la marque CE.
101
SHURE PGX WIRELESS
Le recepteur modèle Shure PGX4 :
Autorisé aux termes de la clause de Déclaration de conformité de la FCC
section 15B. Certifié par IC au Canada sous RSS-123 (« IC: 616A-PGX4 »).
Conforme aux exigences essentielles de la directive européenne R&TTE
99/5/CE (ETSI EN 300 422, partie 1 et 2, ETSI EN 301 489, partie 1 et 9) et
sont autorisés à porter la marque CE.
Les blocs d’alimentation PS21E et PS21UK :
Conforme aux spécifications IEC 60065 et sont autorisés à porter la marque CE.
PS21AR: Conforme aux spécifications IEC 60065. Certifié TÜV Rheinland, Argentina S.A.
Autorisation d'utilisation : Une licence officielle d'utilisation de ce matériel
peut être requise dans certains pays. Consulter les autorités compétentes
pour les exigences possibles.
Ce matériel radio est prévu pour une utilisation en spectacles musicaux
professionnels et applications similaires.
Die Senders Modells PGX1 und PGX2:
Nicht ausdrücklich von Shure Incorporated genehmigte Änderungen oder
Modifikationen können den Entzug der Betriebsgenehmigung für das Gerät
zur Folge haben.
Zugelassen unter FCC Teil 74 (FCC ID: „DD4SLX1” und „DD4SLX2”). Zugelassen durch die IC in Kanada unter RSS-123 und RSS-102 („IC: 616ASLX1” und „IC: 616A-SLX2”). Entsprechen den Grundanforderungen der
europäischen R&TTE-Richtlinie 99/5/EC (ETSI-Normen EN 300 422, Teile 1
und 2, ETSI-Normen EN 301 489, Teile 1 und 9) und sind zum Tragen des
CE-Zeichens berechtigt.
Der Empfänger Modell PGX4:
Zugelassen unter der Übereinstimmungserklärung der FCC, Teil 15B. Zugelassen durch die IC in Kanada unter RSS-123 („IC: 616A-PGX4”). Entsprechen den Grundanforderungen der europäischen R&TTE-Richtlinie 99/
5/EC (ETSI-Normen EN 300 422, Teile 1 und 2, ETSI-Normen EN 301 489,
Teile 1 und 9) und sind zum Tragen des CE-Zeichens berechtigt.
Der netzteilen Modells PS21E und PS21UK:
Entsprechen den Grundanforderungen IEC 60065 und sind zum Tragen
des CE-Zeichens berechtigt.
PS21AR: Entsprechen den Grundanforderungen IEC 60065. Zulassung
TÜV Rheinland, Argentina S.A., No. RA2681022.
Zulassung: In einigen Gebieten ist für den Betrieb dieses Geräts u.U. eine
behördliche Zulassung erforderlich. Wenden Sie sich bitte an die zuständige
Behörde, um Informationen über etwaige Anforderungen zu erhalten.
Diese Funkausrüstung ist zum Gebrauch bei professionellen Musikveranstaltungen und ähnlichen Anwendungen vorgesehen.
102
ENGLISH
Los transmisores modelos PGX1 y PGX2:
Las modificaciones o los cambios efectuados sin la aprobación
expresa de Shure Incorporated podrían anular la autorización concedida para usar el equipo.
Certificado por especimen bajo las normas de la FCC (Comisión Federal
de Comunicaciones de los EE.UU.) (FCC ID: "DD4SLX1" y "DD4SLX2").
Certificados en Canadá por la IC bajo la norma RSS-123 y RSS-102 ("IC:
616A-SLX1" y "616A-SLX2"). Cumple con los requisitos esenciales de la directriz europea 99/5/EC de RTTE (ETSI EN 300-422, partes 1 y 2, ETSI EN
301 489, partes 1 y 9) y califican para llevar la marca CE.
El receptor modelo PGX4:
Autorizado según la cláusula de Declaración de homologación de la parte
15B. Certificados en Canadá por la IC bajo la norma RSS-123 (“IC: 616APGX4”). Cumple con los requisitos esenciales de la directriz europea 99/5/
EC de RTTE (ETSI EN 300-422, partes 1 y 2, ETSI EN 301 489, partes 1 y
9) y califican para llevar la marca CE.
Las fuentes de alimentación modelos PS21E y PS21UK:
Cumple la norma IEC 60065 y califican para llevar la marca CE.
PS21AR: Cumple la norma IEC 60065. Certificado TÜV Rheinland, Argentina S.A., No. RA2681022.
Licencia de uso: Se puede requerir una licencia ministerial para utilizar
este equipo en algunas áreas. Consulte a la autoridad nacional sobre los posibles requisitos.
Este equipo de radio está destinado para uso en presentaciones musicales profesionales y situaciones similares.
I trasmettitori Shure modellos PGX1 e PGX2:
Eventuali modifiche di qualsiasi tipo non espressamente autorizzate dalla
Shure Incorporated possono annullare il permesso di utilizzo di questo apparecchio.
Omologato secondo le norme FCC Parte 74 (FCC ID: "DD4SLX1" e
"DD4SLX2"). Omologato dalla IC in Canada a norma RSS-123 e RSS-102
("616A-SLX1" e "616A-SLX2"). Conforme ai requisiti essenziali specificati
nella direttiva europea R&TTE 99/5/EC (ETSI specificati nella norma EN 300
422, Parte 1 e Parte 2, ETSI specificati nella norma EN 301 489, Parte 1 e
Parte 9) e possono essere contrassegnati con il marchio CE.
103
SHURE PGX WIRELESS
Il ricevitore Shure modello PGX4:
Omologato secondo la clausola di Dichiarazione di conformità delle norme FCC, Parte 15B. Omologato dalla IC in Canada a norma RSS-123 (“IC:
616A-PGX4”). Conforme ai requisiti essenziali specificati nella direttiva europea R&TTE 99/5/EC (ETSI specificati nella norma EN 300 422, Parte 1 e
Parte 2, ETSI specificati nella norma EN 301 489, Parte 1 e Parte 9) e possono essere contrassegnati con il marchio CE.
Di alimentatori PS21E e PS21UK:
Conforme alle norme IEC 60065 e possono essere contrassegnati con il
marchio CE.
PS21AR: Conforme alle norme IEC 60065. Certificato TÜV Rheinland,
Argentina S.A., No. RA2681022.
Concessione della licenza all'uso: per usare questo apparecchio, in certe
aree può essere necessaria una licenza ministeriale. Per i possibili requisiti,
rivolgersi alle autorità competenti.
Questo apparecchio radio è inteso per intrattenimento a livello professionale ed applicazioni simili.
104
ENGLISH
105
ENGLISH
EU DECLARATION OF CONFORMITY
We,
of
Shure Incorporated
5800 Touhy Avenue
Niles, Illinois, 60714-4608 U.S.A.
Phone: (847) 600-2000
Web: www.Shure.com
Declare under our sole responsibility that the following product
Model: PGX1, PGX2
Model: PGX4
Description: Body Pack and Handheld UHF Transmitters
Description: UHF Receivers
conforms to the essential requirements and other relevant previsions of the R&TTE Directive
(1999/5/EC).
The products comply with the following product family, harmonized or national standards:
EN 301 489-1 V1.4.1 (2002-08)
EN 301 489-9 V1.2.1 (2002-08)
EN 300 422-1 V1.2.2 (2000-08)
EN 300 422-2 V1.1.1 (2000-08)
The technical documentation is kept at:
Shure Incorporated, Corporate Quality Engineering Division
SHURE Europe GmbH, EMEA Approval
Manufacturer: Shure Incorporated
Signed: __________________________________ Date: 18 September 2008
Name and Title: Craig Kozokar, EMC Project Engineer, Corporate Quality Engineering Division
European Representative: SHURE Europe GmbH
Signed: __________________________________ Date: 18 September 2008
Name and Title: Wolfgang Bilz, Dipl. Ing. (FH), EMEA Approval
SHURE Europe GmbH
Headquarters Europe, Middle East & Africa
Wannenäcker Str. 28
D-74078 Heilbronn, Germany
Phone: +49 - (0)7131 - 7214 - 0
Fax: +49 - (0)7131 - 7214 - 14
106
ENGLISH
107
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement