OPM-50 Intelligent Optical Power Meter

OPM-50

Intelligent Optical Power Meter

 Automatic Wavelength Identification

 Remote Reference Value Setting

 FTTx Applicable

 Internal Clock & Fiber S/N Editable

 Memory of 1000 Test Records

 Data Transfer to PC via USB

 USB Power Charging

 No Warm-up, Quick Start

 Backlight

 125 Hours Continuous Operation

 Pocketsize, Lightweight and Easy-to-use

 CE FCC Certificates

OPM-50 paired with SLS-50 Intelligent Stabilized Laser Source can be used to identify fiber, measure attenuation and loss, verify continuity and evaluate fiber link transmission quality.

 Automatic Wavelength Identification

Compatible with the digital encryption protocols of SLS-50, OPM-50 can automatically identify the wavelength of the optical signals transmitted from SLS-50 and switch to the corresponding test mode, which greatly reduces the workload at both ends and risk of potential error.

 Remote Reference Value Setting

OPM-50 can receive the power parameters of digital-encrypted signal transmitted from

SLS-50 as reference for precise link loss measurement even the two units are far apart.

 Internal Clock & Fiber S/N Editable

Internal clock enables OPM-50 to save test data with time and editable fiber SN information.

 Compatible With FTTx Test

OPM-50 can be applied to measure Triple-play signals (1310nm, 1490nm and 1550nm) on Passive Optical Network (PON).

www.shinewaytech.com

www.shinewaytech.com

Calibrated Wavelength

Application Range

Power Range (dBm)

Accuracy

Model

Resolution (dB)

MOD Identification

Auto Wavelength Identification

Display Unit

Data Storage

OPM-50

A B

850,1300,1310,1490,1550,1625nm

Singlemode/Multimode optical fibers

-70 ~ +10 -50 ~ +27

±0.25 dB (5%) @25ºC & -10dBm

(±0.5 dB@850nm)

0.01

270,1K,2K Hz

Yes (With SLS-50)

W/mW/dBm/dB(REF)

1000 records

Connectivity USB

Power Saving Auto-off after 5 minutes idle

Detector Type InGaAs

Connector

Power Supply

Battery Life

FC (Interchangeable SC/ST)

Lithium Battery/ AC Adapter

Continuous operation ≥125 hours; Standby ≥250hours

Weight

Dimensions (H × W × T)

315g (0.69 lbs)

177×80×44mm (6.97×3.15×1.73 inch)

Note: OPM models with Ф1000μm detector are available with:

FC/SC/ST/DIN/E2000/LC/Universal 1.25mm/Universal 2.5mm connectors.

* Specifications subject to change without notice

Ordering Information

Standard Configuration:

Instrument, Lithium battery, AC adapter, USB cable, OPM data analysis software CD, Soft carrying case,

Warranty card, CE certificate, Certificate of Calibration, User’s manual.

Optional Parts

Part Description Parts Number (P/N)

3-meter Optical Fiber AC-FJC-03-FC/FC

SC OPM Connecter AC-CONN-SC-P-300

Part Description Parts Number (P/N)

ST OPM Connecter AC-CONN-ST-P-300

www.shinewaytech.com

www.shinewaytech.com