advertisement
Specification
Model
Pick up Element
Effective Picture
Elements (H×V)
Resolution
Minimum Illumination
S/N Ratio
Synchronous System
IR Distance
IR Power On
Video Output
Functions
Power/Current
Lens
IP Rating
Dimension (mm)
Weight (g)
Operating Temperature
Accessories list
Name
Camera
User Guide
IS-AD200SIRDB
1/2.8" SONY 2.4MP CMOS Sensor
1920 X1080
1080P
0.001 Lux/F1.2
More than 50dB
Internal, Negative sync.
20 Meters (with Ф5X24PCS Infrared LED)
Photodiode AUTO Control
AHD,CVBS
OSD menu, DWDR, 3DNR,Sense-up
DC12V(+/-10%)/500mA
Board Lens 3.6mm
/
Φ94 x 69(H)
400
-10~+50℃ RH95% MAX
Number
1
1
Notes :
Do not attempt to disassemble the camera. If the camera can not work, please contact local franchiser or our company.
CCTV Camera
Vandalproof IR Dome Camera
Thank you for using our product.
Before providing power for the camera, please read this manual carefully before use.
We adopt the latest technical of sensor and driver.
It owns the characters of high definition and stability, strong anti-jamming, rich and real color. Fixing and using this model are convenient too. It is very good for you to apply to your CCTV system.
Main Features
> Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit. The color camera
can get high definition picture in low Lux condition.
> Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The color
camera’s AES speed can reach 1/100,000s.
> OSD button shortcut functions
CVBS MODE: hold left key 5s.
AHD MODE : hold right key 5s.
System switching : hold down key 5s.
> OSD MENU
MAIN
MENU
LENS
EXPOSURE
BACK LIGHT
WHITE BAL.
DAY &
NIGHT
NR
MANUAL/DC
SHUTTER
AUTO,1/30,1/60,FLK,1/240,1/480,1/1000,
1/2000,1/5000,1/10000,1/50000,X2,X4,X6,X8
,X10,X15,X20,X25,X30
AGC
SENS-UP
BRIGHT-
NESS
D-WDR
DEFOG
0-15
AUTO(X2-X30)/OFF
0-100
OFF/ON
OFF/AUTO
OFF
BLC:LEVEL/AREA /DEFAULT
HSBLC:SELECT AREA/DISPLAY/BLACK MASK/LEVEL/
MODE/DEFAULT
ATW/AWC→SET/INDOOR/OUTDOOR/MANUAL/AWB
EXT
AUTO
COLOR
B/W
2DNR
3DNR
D→N(DELAY)/N→D(DELAY)
D→N(AGC)/D→N(DELAY)
/N→D(AGC)/N→D(DELAY)
BURST/IR SMART/IR PWM
OFF/LOW/MIDDLE/HIGH
OFF/LOW/MIDDLE/HIGH
CAM TITLE OFF/ON
D-EFFECT
MOTION
FREEZE/MIRROR/NEG.IMAGE
SELECT AREA1-4/DISPALY/SENSITIVITY
/COLOR/TRANS/ALARM/DEFAULT
SPECIAL
ADJUST
PRIVACY
LANGUAGE
DEFECT
RS485
SHARPNESS
MONITOR
LSC
VIDEO.OUT
OFF/ON
ENG/CHN1/CHN2/GER/FRA/ITA
/SPA/POL/RUS/POR/NED/TUR
LIVE DPC
WHITE DPC
BLACK DPC
CAM ID:0-255
ID DISPLAY
BAUDRATE:2400/4800/9600/19200/38400
AUTO/OFF
LCD/CRT
OFF/ON
PAL/NTSC
Device connection Common Problems and Troubleshooting
Safety instruction
1.Before using the camera ,please read this manual carefully and
keep it safely for later use.
2.Installation should be proceed by professional service and follow
manufacturer’s instructions, do not dismantle without authoriza
tion.
3.In order to prevent sensor ,do not expose lens to intense light source in long time.
4.Do not touch sensor directly. Please covers the dustproof cover
when the camera is not being used.
5.Please use a dry soft cloth to clean the camera. If dirt difficult to clean, use detergent with water and wipe dry the camera.
6.Do not install camera under air conditioning’s air gate ,or else lens blur with condensation of moisture.
7.Please ensure that all electric power sources are turned off when not open , installation ,clean, etc operation.
8.Please transporting , using and storing the camera in allowable
temperature and humidity.
9.If the camera was broken, for example power cord or plug damaged,Splash liquid or foreign matter fall into camera, raining, wetting, etc can’t work situation, please contact manufacturer
or maintenance center (modify and maintenance without perm
ission, you must be responsible for the problems).
> No Picture after providing power
May be the power supply voltage abnormity, please check
he power supply voltage and pole whether exactitude.
Please check all the connecting cable and monitors whether
be connected correctly or not.
> The picture level direction have flowing interference
ripples
May be caused by the power supply AC ripples, it need filter
the wave of the power supply.
Check the monitor and peripheral equipments used.
> The picture background color changes continuously
The fluorescent lamp’s electromagnetic field cause color roll.
This is proper phenomenon of the cameras.
Reduce the fluorescent lamp numbers or increase the
distance between the camera and the fluorescent lamps can
improve it.
Use power supply external sync. camera can solve it.
> The picture smear too mass
The power supply’s voltage unstable.
Connecting cables not connect correctly or have high
impedance.
Note:
• Power supply must pass safety certification ,Its output
voltage, current, voltage polarity and operating temper-
ature must match requirement of this equipment.
• Please install lightning protection devices or cut off the
power in thunder and lightning conditions.
• To capture high-quality video and pictures, please make
sure the network connection is stable and smooth.
• Please note the camera’s operating temperature and its
using environment requirement. Avoid using the camera
at too high or too low temperatures. The operating tem-
perature is -30~+60℃. (Recommendatory operating tem-
perature is -10~+50℃.)
• Do not mount the camera near by the radiator or heater.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement