1092 DTS CAT 4p de couv (GB

1092 DTS CAT 4p de couv (GB
XFF / XFR Range
Tubular fluorescent
fitting
■
■
■
■
▼▼▼▼
TYPICAL
APPLICATIONS
Marine
Refineries
Petrochem/chemical
Painting/solvent areas
Two choices of tube:
- polycarbonate (light weight and high shock resistance)
- glass (hostile environment)
Low maintenance cost (use of standard components)
Total anti-corrosion and marine protection
High lumen output (PL lamp version)
Product characteristics
■
■
■
■
■
■
■
■
Marine grade aluminium alloy construction
Yellow polyurethane paint
Polycarbonate or glass tube
White painted sliding metal gear tray for G13 or G11 PL compact lampholders
(depending on version)
Standard power supply 230V 50Hz (other versions – see options)
One 3/4” NPT brass cable gland
One 3/4” NPT steel plug
Set of 2 articulated brackets
CERTIFICATION STANDARD: CENELEC EN 50014, 50018
EC TYPE EXAMINATION CERTIFICATE: under the new directive 94/9/EC
of 23/03/94: LCIE 02 ATEX 6170X
II 2 G and D, IP66 T80°C for D
EExd IIC T6 (polycarbonate tube)
EExd IIC T6 or EExd IIB T6 (glass tube, according to version)
Ingress protection: IP66/67
Shock resistance: IK09 (polycarbonate tube)
Glow wire test: 960°C
Please note
In solvent and spray painting
areas, glass tubes are
recommended
42
Z.I. - Avenue Henri Beaudelet B.P. 27 - 77831 Ozoir Cedex - France - Tel. +33 (0)1 64 40 27 26 - Fax +33 (0)1 64 40 20 11
Zone 1
+ zone 2
EEx “d”
Flameproof
Technical specifications
Enclosure
One 3/4” zinc chromed steel plug
Options: 3/4” NPT metal cable gland for armoured
cable type PAP (see page 124)
M20 metallic cable gland for non-armoured cable type
PL (see page 125)
M20 metallic cable gland for armoured cable type PLP
(see page 125)
End caps and cover in marine grade aluminium alloy type
AS10GY30
Yellow polyurethane paint RAL 1003 (other colour on
request)
Offshore option: 3 coats of paint
Extruded 2.5mm LEXAN polycarbonate tube, anti-UV
protected
7mm borosilicate glass tube
Ingress rating: IP66/67 (EN60529), neoprene gasket
Stainless steel screws
Terminal block (plug in terminal block)
Up to 10mm2 (rigid wire), 6mm2 (flexible wire)
Terminals supplied for L, N, PE, looping possible
Photometric
data
Lamps (supplied on demand)
Temperature
Ambient temperature range: -20°C to +55°C
Surface temperature classification:T6 (gas),T80°C (dust)
T8 bi-pin G13 tube, Ø 26 - white industry 4000°K
(other colour temperatures on demand)
G11 compact fluorescent PL lamp
90
60
Fixing
50
Rated voltages
Standard: 2 chromed zinc articulated brackets
(type DO23) for ceiling mounting
Options: 2 stainless steel brackets 304L (type DO24)
for ceiling mounting
2 U-bolts and brackets in stainless steel 304L for pole
mounting 1 1/4” (type DO25), 1 1/2” (type DO26),
2” (type DO27)
2 U-bolts and brackets in stainless steel 304L for pole
mounting 1 1/4” (type DO28), 1 1/2” (type DO29),
2” (type DO30)
40
Power factor
0.75 with ferromagnetic ballast (with capacitor,
except 20W: 0.60)
0.98 with electronic ballast
80
70
60
50
40
30
30
20
10
0
10
20
For 1000 lm, with 1 lamp
90
1
100
110
25
50
75
100
125
150
175
200
10
80
70
60
50
100 90
80
70
60
50
40
Stainless steel canopy 304L
Stainless steel shockproof kit 304L (factory fitted)
Standard: One brass 3/4” NPT cable gland for nonarmoured cable – Ø 8-10mm
XFR120
XFR140
XFR165
XFF220
XFF240
XFF265
XFR136
XFR155
XFF236
XFF255
100 90
0.68 H + 0.10 T
Other options
Cable entries
Reference
110
25
50
75
100
125
150
175
200
70
Protection class: I
Standard: ferromagnetic ballast – 230V 50Hz
Options: ferromagnetic ballast – 240V 50Hz
110V 50Hz – 220V 60Hz – 230V 60Hz – 127V 60Hz –
110V 60Hz
Single / dual tube electronic ballast:
AC 220V to 240V – 50-60Hz – DC 220V to 240V
110
100
80
40
0.63 G + 0.07 T
30
30
20
Weight (in kg)
0
10
20
For 1000 lm, with 2 lamps
Installation and maintenance instruction leaflet NT 12 available on request
Dimensions (in mm)
10
Rating
Nominal
Classification zone
(in W)
current (in A)
A x B
polycarbonate
glass
polycarbonate
glass
1 x 18
1 x 36
1 x 58
2 x 18
2 x 36
2 x 58
1 x PL 36
1 x PL 55
2 x PL 36
2 x PL 55
0.15
0.20
0.35
0.30
0.40
0.70
0.20
0.25
0.40
0.50
780 x 565
1385 x 1170
1690 x 1475
780 x 565
1385 x 1170
1690 x 1475
780 x 585
780 x 585
780 x 585
780 x 585
5.5
9
11
6.5
10
12
6
6
6.5
6.5
7.5
17
17
8.5
18
20
8
8
8.5
8.5
IIC T6
IIC T6
IIC T6
IIC T6
IIC T6
IIC T6
IIC T6
IIC T6
IIC T6
IIC T6
IIC T6
IIB T6
IIB T6
IIC T6
IIB T6
IIB T6
IIC T6
IIC T6*
IIC T6
IIC T6*
* T5 in 240VAC
* For glass tube version, add V to the reference (eg.: XFR120V)
Fixing accessories
Bracket
D023/D024
U-bolt for pole
mounting
55
R
Spare parts
Ø8
Ø 11
35
D001
D002
D003
D004
D005
D006
Sealed polycarbonate tube
for XFR/XFF**
Cover
Gasket
Slide for gear tray
Sliding gear tray*
Connector
* Specify rating plus voltage
D007
D008
D009
D010
D010PL
D011
Starter socket
Starter
Ballast*
Lamp holder
G11 lampholder for PL
Chain
2 Ø 11
3
35
35
3
35
Dimensions
Ø 165
** Use index V for glass tube
43
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement