Bticino 349340 manual

349340

Video Display Eteris

User guide

2

Contents

1 Introduction and basic functions

1.1 General information

1.2 Your Video Display: use it now!

1.2.1 Video door entry function keys

1.2.2 Navigation keys

1.3 Menu functions

1.3.1 Volume adjustment

1.3.2 Monitor adjustment

1.3.3 Camera swing

1.3.4 Bells adjustment

1.3.5 Paging

2 Trouble shooting

2.1 Push to Talk mode

3 CCTV functions

3.1 Activation

3.2 Intercommunication

3.3 Camera

3.4 Cycle cameras

3.5 Staircase lights

3.6 Call exclusion

12

13

14

10

11

7

8

5

6

6

7

15

17

19

20

20

21

21

22

22


4 House automation functions

4.1 Scenarios

4.2 Alarms

4.3 Sound system

4.4 Temperature control

4.5 Multimedia menu

5 Services

5.1 The “Settings” menu

5.2 Services

5.2.1 Professional studio

5.2.2 Hands free

5.2.3 Door state

5.2.4 Alarm messages

5.3 Messages

23

24

25

26

27

29

31

32

33

33

33

34

34

35

3

4

1.1

General information

1.2

Your Video Display: use it now!

1.3

Menu functions

6

6

8


5

1.1

General information

The Video Display offers the normal video door entry and CCTV functions and can also interact with your My home system.

Fitting in with My Home

• Scenarios:

Runs the scenarios saved in the Scenario module.

• Alarms:

Signals the last alarm events which have occurred and the division of the system.

• Sound system:

Manages the BTicino digital sound system.

• Temperature control:

Displays and adjusts the temperature in the various zones of the home and the state of the control unit.

LCD screen note

The LCD screen has been manufactured using advanced high precision technology. It is however possible that sometimes up to 5 small black or coloured dots (red, blue, green) may appear on the LCD screen. This is an absolutely normal result of the manufacturing process and is not indicative of a malfunction and/or fault.

WARNINGS

■ Incorrect use of the Video Display and of all the devices connected to it excludes any guarantee!

■ For cleaning only use a damp or antistatic cloth. Avoid the use of alcohol or chemical detergents.

6

2


1.2

Your Video Display: use it now!

1 - Entrance panel and cycling switching ON key

2 - Door lock key

3 - Connection key

4 - Call exclusion LED*

1

7

5

8

4

3

5 - Navigation keys

6 - Microphone

7 - LCD 2,5” colour display

8 - Loudspeaker

* It lights up when the bell volume is set to 0.

6

1.2.1 Video door entry function keys

Activation Entrance Panel/Cycling

It activates the switching on of the associated

Entrance Panel and, if present, allows the cycling display of the other Entrance Panels/cameras.


1.2.2 Navigation keys

key

Allows access to the menu; confirms the selection made.

keys

Inside the menu they select the previous or next item.

Door lock key

When there is a call it opens the door lock of the

Entrance Panel from which the call was made, at rest that of the associated Entrance Panel. The LED signals that it is activated.

Connection key

Activates/deactivates the audio connection.

When a call has been received the LED flashes; press once to answer: the LED shines steadily.

At rest activates the paging function (if enabled).

keys

Inside the menu they change the value set.

In audio/video connection they allow rapid access to the volume and monitor settings.

keys

Returns to the previous window. If you are already on the first window it switches the display off.

7

1.3

Menu functions

Use the OK key to access the main menu:

1 1 1

SETTINGS

1 1 2

Use the keys to select the functions from those available:

1) Submenu and commands

2) Use the settings icon to access a series of adjustments/services described below

Three possible solutions for drawing up the main menu are given below:

• menu with COMMUNICATION functions;

• menu with HOME AUTOMATION functions;

• CUSTOMISED menu.

For more explanations consult the complete User Manual in the CD supplied.


COMMUNICATION

Main menu example with programming of just the COMMUNICATION commands.

1 2 3

1) Activation

2) Intercommunication

3) Camera

4) Cycle cameras

5) Settings

ACTIVATION I

3 4 5

HOUSE AUTOMATION

Main menu example with communication and house-automation submenu.

1 2 3

SCENARIOS

1) Communication

2) Scenarios

3) Alarms

4) Sound system

5) Temperature control

6) Settings

4 5 6

8

CUSTOMISED MENU

The customised menu allows more intuitive use of the Video Display functions. In fact the menu only displays the functions in your My

Home system and the text of each command can be customised in the installation phase.

Using the customised menu also lets you:

• Have the PROFESSIONAL STUDIO, HANDS FREE, PAGING and

MULTIMEDIA functions, which otherwise can only be called from the

SETTINGS menu, in the main page or in another page.


The installer has given the exact configuration of your Video Display the tables below; if he has not filled it in ask for it.

FUNCTIONS

COMMUNICATION

DESCRIPTION

1 2 3

SETTINGS

4 5 6

1) Communication

2) Professional studio

3) Hands free

4) Paging

5) Multimedia

6) Settings SCENARIOS

ALARMS

SUB-MENU

HOUSE AUTOMATION

SYSTEM FOUND

SOUND SYSTEM

TEMPERATURE CONTROL

MULTIMEDIA INTERFACE

9


1.3.1 Volume adjustment

NOTE: During a video door entry call you can access the Adjustments menu directly by pressing the or key.

ADJUSTMENTS

Select

Adjustments

IMPOSTAZIONI

Press OK to access the menu

Press OK to confirm

Inside the menu select one of the items

(e.g. Bells)

Adjust the volume to the level required.

BELLS

EP SOUND = sound volume when talking to the entrance panel.

INTERCOM = sound volume when holding an intercom conversation.

BELLS = volume level for all the bells.

SOUND SYSTEM = sound system volume.

VOLUME

10

1.3.2 Monitor adjustment

NOTE: During a video door entry call you can access the Adjustments menu directly by pressing the or key.

ADJUSTMENTS

Select

Adjustments

IMPOSTAZIONI


COLOUR

Select

Monitor

Press OK to confirm

MONITOR CONTRAST


Inside the menu select one of the items

(e.g. Contrast)

Make the adjustment

11

1.3.3 Camera swing

NOTE: This menu can only be accessed during the connection with the entrance panel, if this is set up for the camera swing.

Select

Adjustments


ADJUSTMENTS


Adjust the correct camera angle

Select

Swing

Press OK to confirm

12

SWING BRACKET


1.3.4 Bells adjustment

You can associate one of sixteen tunes to each call event.

BELLS

01

Select Confirm and then OK to save the selection and return to the previous page

Choose the tune

Adjust the volume

Select

Bells

IMPOSTAZIONI


TUNE

Select the event

Press OK to confirm

CALL FROM EP = call from the entrance panel (S=0 o S=1)

INTERNAL INTERCOM = call from the intercom in your apartment

EXTERNAL INTERCOM = call from an intercom in another apartment

CALL TO THE FLOOR = call from the pushbutton near your entrance door

CALL FROM EP (S=0)

13

1.3.5 Paging

If your system is set up, using the icon in the main menu a “paging” call can be sent to the system:

• Basic: only sound system

• Enhanced: on the speaker* audio handsets as well

Select

Paging

Press OK to confirm

PAGING


Once the communication is activated the voice will be played on the whole system.

The page function can be activated directly by pressing the key

(if the installer has configured it).

* Configurate with Software

14

Trouble shooting

2.1

Push to Talk mode 17


15


PROBLEM SOLUTION

On pressing the Entrance panel Activation/Cycling key ( ) no picture appears.

- the audio/video channel may be busy, wait for it to become free

(from 1 to 3 minutes) and try again.

On pressing the OK key the menu does not switch on and the handset gives a busy sound

When called the handset does not ring

At the entrance panel it is difficult to hear the caller

At the handset it is difficult to hear the caller

- the audio/video channel is busy, wait for it to become free (from 1 to 3 minutes) and try again.

- check that the call has not been excluded (the call exclusion LED is

ON);

- check the configuration of the devices.

- talk at a maximum distance of 40 centimetres from the Video

Display microphone;

- check the entrance panel settings with the installer and if necessary reduce the microphone volume;

- you can communicate in PUSH TO TALK mode (see description on next page).

- check the volume setting on the Video Display;

- make sure that there are no strong noise sources near the Video Display;

- you can communicate in PUSH TO TALK mode (see description on next page).

16

2.1

Push to Talk mode

Receiving a call from the entrance panel.

Press the Connection key to answer the call.

The connection LED lights up.

During the conversation you can activate the PUSH TO TALK function.

Press the Connection key for at least 2 seconds to talk to the entrance panel.

The LED remains ON.


17

Release the key to hear from the entrance panel.

The LED becomes red.

To end the connection press the connection key briefly.

The LED goes out.

18


CCTV functions

3.1

Activation

3.2

Intercommunication

3.3

Camera

3.4

Cycle cameras

3.5

Staircase lights

3.6

Call exclusion

21

22

22

20

20

21


19

3.1

Activation

This function activates an actuator or an entrance panel. As an example you can activate the opening of a secondary gate.


3.2

Intercommunication

This function allows conversation with other video handsets/ handsets installed in your home or in other apartments.

ACTIVATION I

20

COMMAND PERFORMED

Press OK to access the Main menu

Select the function

Press OK to confirm

INTERCOMUNICANTE I

Command Performed appears on the screen briefly

To quit the menu press the C key



Select the extension to call

Press OK to confirm

Command Performed appears briefly and then the screen switches off

If the audio/video channel is occupied by another user you hear a sound and the command is not performed.

Wait until the channel is free and try again.

If there is a call from the entrance panel, the conversation is interrupted.

3.3

Camera

This function lets you monitor your home, activating one of the cameras in the apartment and in the common areas (e.g. garage or garden).


3.4

Cycle cameras

This lets you display the pictures taken by all the cameras installed one after the other. Once activated the Video Display displays the first camera for 10 seconds, then goes to the next. When the cycle is complete, the screen switches off.

You can stop on the display of one camera by pressing the Connection key.

The working camera remains active and if it belongs to an entrance panel the sound communication is activated as well.


CAMERA I

Select the camera to activate

Press OK to confirm

The picture taken by the camera selected appears on the screen (if the audio/video channel is occupied by another user the command is not performed. Wait until the channel is free and try again).

If there is a call from the entrance panel, the connection will be interrupted.

CYCLE CAMERAS

Select

Cycle cameras

Press OK to Confirm

(if the audio/video channel is occupied by another user the c o m m a n d i s n o t performed. Wait until the channel is free and try again).

If there is a call from the entrance panel, the connection will be interrupted.

21

3.5

Staircase lights

Lets you switch on the lights at the entrance or on the stairs.


3.6

Call exclusion

This lets you enable/disable the call bell.

If the bell is disabled the call exclusion LED lights up.

STAIRCASE LIGHTS

Press OK to access the

Main menu

Select the Staircase

light function

Led

To activate the call exclusion set the “Bell” volume to zero (see Volume Adjustments chapter, page 10).

Press OK to confirm

Command Performed appears on the screen briefly then the Main menu returns.

22


House automation functions

4.1

Scenarios

4.2

Alarms

4.3

Sound system

4.4

Temperature control

4.5

Multimedia menu

24

25

26

27

29


23


4.1

Scenarios

Your Video Display communicates with the BTicino automation system, activating the scenarios.

SCENARIOS

Inside the Main menu select Scenarios

Press OK to confirm

The installer has given a brief description of the scenarios set in the tables below, if he has not filled it in ask for it.

DESCRIPTION SCENARIO

SCENARIO I

SCENARIO II

SCENARIO III

SCENARIO IV

SCENARIO V

SCENARIO I

Select the scenario you want to activate

Press OK to confirm

Command Performed appears on the screen briefly

To quit the menu press the C key.

24

4.2

Alarms

Your Video Display communicates with the BTicino burglar-alarm system, in particular giving information on the system state, the active zones and the last 3 alarms given.

Alarms icons key:

ARMED

ALARMS

Inside the Main menu select Alarms

Press OK to confirm

The information screen appears

DISARMED

INTRUSION

FREEZER

EMER GENC Y

CALL

TELERESCUE


ANTIPANIC

TECHNICAL

TAMPERING

FIRE

GAS LEAK

FLOOD

25

The information in the screen is read as indicated below:


4.3

Sound system

If your Video Display is connected to the BTicino sound system you can check it.

2

1

3

Inside the Main menu select Sound system


SOUND SYSTEM

1) State of the 8 zones managed by the burglar-alarm system: the corresponding number (from 1 to 8) is indicated for each active zone

2) System state = ON/OFF

3) Information on the last 3 alarms:

Type of alarm, Zone or Channel of origin

Technical Alarms:

GAS LEAK

FREEZER

FLOOD

EMERGENCY CALL

C=1

C=2

C=3

C=4

TECHNICAL GENERIC

FIRE

TELERESCUE

C=5,6,7

C=8

C=9

NOTE: when the burglar alarm is switched on, the memory of the last 3 alarms is cancelled; if the siren is active, a further alarm can’t be visualized.

26

CD

SOUND SYSTEM

Using the

- + keys you can activate/deactivate the sound system*, adjust the volume, select the

CD track or change the radio station and select the musical source.

* – One-channel system: general activation, of the single room and of the single amplifier if the Video Display is programmed by PC.

– Multi-channel system: activation of the single room and of the single amplifier if the

Video Display is programmed by PC.


4.4

Temperature control

Your Video Display lets you control and adjust the temperature inside the home, interacting with the BTicino temperature control system.

1

SOUND SYSTEM

2

4

3

5

CD

1) Press the

2) Press the

3) Press the

4) Press the

5) Press the

CD track

-

and

and

and

+

keys to select amplifier

ON/OFF the system

adjust the volume

+

key to select the music source (radio, CD, etc.)

and

+

keys to change the radio station or choose the

TEMPERAT. CONTROL

TEMP. CONTROL UNIT

20.5 °C

Inside the Main menu select Temperature control system

Press OK to confirm

You can set the manual mode and

- +

keys.

Set the heat protection

27


You can set the temperature on different levels in the various system zones.

1

2

4

TEMP. CONTROL UNIT

20.5 °C

3

1

2

4

20.5 °C

ZONES: 01

22.5 (+2)

18.5 °C

3

5

1) Press the

-

and

+

keys to select Temperature control unit/Zones

2) To set the manual mode and adjust the temperature use the

+

keys and then press OK to confirm

-

and

3) To set the Weekly mode; press OK to confirm (the last weekly program selected on the Temperature control unit is set)

4) Press the

+

key to set the protection (antifreeze for winter or heat protection for summer);

Pressing the

-

key switches the system OFF

1) Press the

-

and

+

keys to select Temperature control unit/Zones

2) To set the manual mode and adjust the temperature use the

+

keys and then press OK to confirm

-

and

3) To set the Automatic mode; press OK to confirm (in this case resets the mode set on the Temperature control unit for this zone)

4) Press the

+

key to set the protection (antifreeze for winter or heat protection for summer);

Pressing the

-

key switches the zone OFF

5) Display the zone’s current state.

28


4.5

Multimedia menu

If your system has the Multimedia Interface (item 3465), you can access your menu via the dedicated icon.

Inside the

Main menu select

Multimedia


MULTIMEDIA INTERFACE

✎

To navigate the menu of the multimedia interface use the same keys as its remote control:

MY HOME

Settings Automation Lighting

Burglar alarm

SETTINGS

Loads Temperature control

1/2

The display of your Video Display displays the main window of the

Multimedia Interface.

✎

The “MENU” key of the multimedia interface can be activated by pressing and holding down

C

on the Video Display.

✎

Inside the menu of the multimedia interface the videostation will not switch off automatically. To exit and switch the monitor off press the pushbutton

29

30


Services

5.1

The “Settings” menu

5.2

Services

5.3

Messages

32

33

35


31

5.1

The “Settings” menu

The main menu always has the SETTINGS icon. Selecting it gives access to a wide range of customisations which let you get the most from your

Video Display.

Inside the Main menu select Settings


SETTINGS

1 2 3

32

SERVICES

4 5 6

The following page is displayed with the icons:

1) Adjustments (see chapter 1)

2) Services

3) Messages

4) Bells

5) Information

6) Configuration

5 Services

SETTINGS

ADJUSTMENT

VOLUME

MONITOR

SWING

PROF. STUDIO

HANDS FREE

DOOR STATE

ALARM MSG

SERVICES

MESSAGES

BELLS

INFORMATION

CONFIGURATION

CAUTION

Only the installer has access to the CONFIGURATION menu; incorrect operations could affect the operation of the Video Display.


5.2

Services

5.2.1 Professional studio

The Professional Studio function lets you set the automatic opening of the door lock when there is a call from the Entrance Panel. It cannot be activated at the same time as the Door State function.

5.2.2 Hands free

The Hands Free function automatically activates the microphone and loudspeaker when there is a call, avoiding having to press the Connection key to answer (the connection is established immediately the call is made).

SERVICES

Select

Services

IMPOSTAZIONI

Press OK to confirm

SERVICES

Select

Settings

IMPOSTAZIONI

Press OK to confirm

PROF. STUDIO

Enable or disable the function

If you enable this function your Video

Display door lock LED flashes to remind you.

HANDS FREE


If you enable this function your Video

Display door lock LED flashes to remind you.

33

5.2.3 Door state

This function tells you about the door lock state. If it is open the “door lock LED” flashes, if it is closed it remains OFF.

NOTE: it can only be activated if your system allows it (ask your installer for more information); it can not be activated at the same time as the

Professional Studio function.

5 Services

5.2.4 Alarm messages

If it is activated the Video Display tells you if the antiintrusion system has detected an alarm. The three LED flash alternately until a key is pressed to display the message (if locally supplied the message will be displayed automatically).

To cancel the message press the

C

key when the message is displayed. If not the signal will appear the next time a key is pressed.

SERVICES

Select

Services

IMPOSTAZIONI

Press OK to confirm

SERVICES

Select

Services

IMPOSTAZIONI

Press OK to confirm

Select

Door state


ALARM MSG

Select

Alarm MSG


34

DOOR STATE

5.3

Messages

Select

Messages

Press OK to confirm

MESSAGES

Message from switchboard.

- 1 +

Select the message you want to display

Press C to return to the previous page

There are messages, the menu can be selected.

No messages, the menu cannot be selected.


35

BTicino SpA

Via Messina, 38

20154 Milano - Italy www.bticino.com

BTicino SpA reserves at any time the right to modify the contents of this booklet and to comunicate in any form and modality, the charges brought to the same.

Bticino 349340 manual

Video Display Eteris

User guide

1 Introduction and basic functions

2 Trouble shooting

3 CCTV functions

4 House automation functions

5 Services

General information

Your Video Display: use it now!

Menu functions

6

6

8

General information

WARNINGS

Your Video Display: use it now!

Menu functions

Trouble shooting

Push to Talk mode 17

Push to Talk mode

CCTV functions

Activation

Intercommunication

Camera

Cycle cameras

Staircase lights

Call exclusion

21

22

22

20

20

21

Activation

Intercommunication

Camera

Cycle cameras

Staircase lights

Call exclusion

House automation functions

Scenarios

Alarms

Sound system

Temperature control

Multimedia menu

24

25

26

27

29

Scenarios

Alarms

Sound system

Temperature control

Multimedia menu

C

Services

The “Settings” menu

Services

Messages

32

33

35

The “Settings” menu

Services

C

Messages

BTicino SpA

Via Messina, 38

20154 Milano - Italy www.bticino.com

Related manuals

Bticino

349311

Bticino

344400

Bticino

349340

Legrand

573950