SmartPro 120V 2.2kVA 1.92kW Line-Interactive Sine Wave UPS, 2U

SmartPro 120V 2.2kVA 1.92kW Line-Interactive Sine

Wave UPS, 2U Rack/Tower, Extended Run,

Pre-installed SNMPWEBCARD, LCD Display, USB,

DB9 Serial

MODEL NUMBER: SMART2200RMXLN

Highlights

2.2kVA / 2200VA / 1920W line interactive 2U rack / tower UPS;

0.9 power factor

120V nominal output during brownouts to 83V and overvoltages to 145V

Interactive LCD provides UPS status information and advanced configuration options

USB, RS232, EPO and

Pre-installed SNMPWEBCARD interface

Expandable runtime, Hot-swap batteries, 96% efficiency, Sine wave output

2 independently switchable output load banks

NEMA 5-20P input; 4 NEMA

5-15/20R & 4 5-15R outlets

Description

Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for

Applications

Distributed Server Rooms critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight

Network Closets

Small Business Networks

Voice over IP (VoIP) Phone

Systems undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed

UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Network

Package Includes

SMART2200RMXLN UPS management interfaces support communications via USB, RS-232 and pre-installed SNMPWEBCARD network interface. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software and complete system with Pre-installed

SNMPWEBCARD

PowerAlert software with USB,

Serial & EPO cabling

4 post installation kit

Owner's manual cabling. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test.

Field-replaceable, hot-swappable battery modules.

Features

Tripp Lite SMART2200RMXLN line interactive 2U rack/tower UPS with 2200VA / 2.2kVA / 1920W capacity and extended runtime options

Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 145V

NEMA 5-20P input plug; 4 NEMA 5-15/20R and 4 5-15R output receptacles, Two independently switched output load banks

Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages

1 / 5

High 96% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions

Internal batteries offer 12 minutes at 50% load (960W) and 4.5 minutes at 100% load (1920W)

Extended runtime is available with optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible);

Output is reduced to 1600 watts maximum with external battery packs

External battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)

Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment

Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS and site power information

LCD interface also supports a number of advanced user setup and operating preferences

Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND enables tower placement

Built-in USB, RS-232 and pre-installed SNMPWEBCARD accessory

HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X

Included PowerAlert UPS monitoring software; Built-in Emergency Power Off (EPO) interface with cable

Specifications

OUTPUT

Output Capacity Details

Output Volt Amp Capacity (VA)

Output kVA Capacity (kVA)

Output Watt Capacity (Watts)

Output kW Capacity (kW)

Nominal Output Voltage(s)

Supported

Frequency Compatibility

Output Voltage Regulation (Line

Mode)

Output derates to 1600 watts in all external battery pack configurations

2200

2.2

1920

1.92

120V

60 Hz

-14%, +6%

Output Voltage Regulation (Battery

Mode)

Output Receptacles

Load Management Receptacles

+/- 5%

(4) 5-15R; (4) 5-15/20R

Two switched single outlet load banks (1 5-15/20R & 1 5-15R)

Output AC Waveform (AC Mode) Pure Sine wave

Output AC Waveform (Battery Mode) Pure Sine wave

INPUT

Rated input current (Maximum Load) 16.0A

Nominal Input Voltage(s) Supported 120V AC

UPS Input Connection Type 5-20P

UPS Input Cord Length (ft.) 10

2 / 5

UPS Input Cord Length (m)

Recommended Electrical Service

Input Phase

VOLTAGE REGULATION

Voltage Regulation Description

Overvoltage Correction

Undervoltage Correction

Severe Undervoltage Correction

3

20A 120V

Single-Phase

BATTERY

Full Load Runtime (min.)

Half Load Runtime (min.)

Expandable Battery Runtime

External Battery Pack Compatibility

DC System Voltage (VDC)

Battery Recharge Rate (Included

Batteries)

Internal UPS Replacement Battery

Cartridge

Battery Access

Battery Replacement Description

Expandable Runtime

4.5 min. (1920w)

12 min. (960w)

Extended runtime supported via optional external battery packs

BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible); BP48V27-2US (multi-pack compatible)

48

Less than 4.5 hours from 10% to 90% (typical, full load discharge)

RBC94-2U

Front panel battery access door

Hot-swappable, user replaceable batteries

Yes

Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145

Voltage reduction of 12% applies when input is between 127 and 145

Voltage boost of 12% applies when input voltage is between 96 and 108

Voltage boost of 24% applies when input voltage is between 83 and 95

USER INTERFACE, ALERTS & CONTROLS

Front Panel LCD Display

Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)

Switches

Alarm Cancel Operation

Audible Alarm

Front Panel LCD

3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions

Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available

Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions

Yes

SURGE / NOISE SUPPRESSION

UPS AC Suppression Joule Rating

UPS AC Suppression Response

Time

EMI / RFI AC Noise Suppression

570

Instantaneous

Yes

3 / 5

PHYSICAL

Included Mounting Accessory

Description

Installation Form Factors Supported with Optional Accessories

Primary Form Factor

4 post rackmount installation accessories included

2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND)

Rackmount

UPS Power Module Dimensions

(hwd, in.)

UPS Power Module Dimensions

(hwd, cm)

3.43 x 17.32 x 19.46

8.7 x 44 x 49.4

Rack Height (U Spaces)

UPS Power Module Weight (lbs.)

2

57.6

UPS Power Module Weight (kg) 26.2

UPS Shipping Dimensions (hwd / in.) 7.9 x 21.7 x 24.2

UPS Shipping Dimensions (hwd / cm)

20.1 x 55.1 x 61.5

Shipping Weight (lbs.)

Shipping Weight (kg)

Cooling Method

UPS Housing Material

68.8

31.2

Fan

Steel

ENVIRONMENTAL

Operating Temperature Range

Storage Temperature Range

Relative Humidity

AC Mode BTU / Hr. (Full Load)

AC Mode Efficiency Rating (100%

Load)

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

0 to 95%, non-condensing

306

96%

COMMUNICATIONS

Communications Interface

DB9 Serial; EPO (emergency power off); Pre-installed network card; Slot for SNMP/Web interface; USB (HID enabled)

Network Monitoring Port Description Pre-installed SNMPWEBCARD network interface; Supports detailed monitoring of UPS and site power conditions

PowerAlert Software Included

Communications Cable

WatchDog Compatibility

USB and DB9 cabling included

Supports Watchdog application, OS and hard-reboot restart options for remote applications

LINE / BATTERY TRANSFER

Transfer Time 5 milliseconds (line to battery mode); 1 millisecond (battery to line mode)

4 / 5

Low Voltage Transfer to Battery

Power (Setpoint)

High Voltage Transfer to Battery

Power (Setpoint)

83

145

SPECIAL FEATURES

Grounding Lug

Cold Start (Startup in Battery Mode

During a Power Failure)

High Availability UPS Features

Green Energy-Saving Features

Back panel grounding lug

Cold-start operation supported

Hot swappable batteries

Greater than 95% efficiency - GREEN UPS; Individually controllable load banks

CERTIFICATIONS

UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)

WARRANTY

Product Warranty Period (Worldwide) 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.

Connected Equipment Insurance

(U.S., Canada & Puerto Rico)

$250,000 Ultimate Lifetime Insurance

© 2015 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement.

Specifications are subject to change without notice. Photos may differ slightly from final products.

5 / 5