未命名 - Verity Audio
KV10
VERY HIGH GRADE COMPONENTS
SMOOTH SOUNDING
MORE FOR LESS
FIRE & FORGET
AT A GLANCE
Real 300W RMS power capacity (8 hours pink noise)
Distortion free and natural reproduction
Optimized for smooth frequency response in and out axis
Custom made European drivers
Proprietary 80ºx50º elliptic horn
Touring grade soft touch gloss-free black painting
APPLICATIONS
The KV10 loudspeaker system is suitable for near
field main PA reinforcement in full-range mode or
with a subwoofer, on a permanent installation or as a
portable system, for monitor in small stages, and as a
delayed filling speaker. Suitable for spaces like:
- FoH
- Multi-functional room
- Auditorium and Theater
- Bar / Pub / Nightclub
- Commercial announcements
16
© VERITY PRO AUDIO, Lille, France - all rights reserved
SPECIFICATIONS
Power Capacity / Puissance admissible (50~15000Hz pink noise 8 hours)
Nominal impedance / Impédance nominale
Frequency response / Réponse en fréquence (-6dB half space, no EQ)
Manufacturing Consistency tolerance / Tolérance de fabrication
Average Sensitivity / Sensibilité moyenne
Calculated Maximum Pressure / Pression acoustique maximale (SPL / 1m)
Nominal Directivity / Directivité nominale (-6dB)
Recommended low cut filter / Coupe bas conseillé
Low Frequency driver / Haut parleur de grave
High Frequency driver / Haut parleur d’aigu
Crossover / Filtre acoustique
Flying hardware / Équipement d’accroche
Connectors / Connectique
Floor Monitor use / Usage retour de scène
Pole mount / Support pour pieds
Cabinet / Caisse
Finish / Finition
Size / Taille (WxHxD)
Weight / Poids
300W RMS / 600W program
8Ω
46~19000Hz
±2dB from 300 to 10000Hz
97dB/W/m (wideband 200~16000Hz)
122dB continuous / 125dB program
80° x 50° above 1400Hz
40Hz 24dB/oct in full range mode,
60~140Hz with subwoofer
Custom made European 10” driver,
Ferrite magnet, 2.5” voice coil
Custom made European 1” exit driver,
Ferrite magnet, 1.7” voice coil, 300°C polymer diaphragm
Passive mode only
1700Hz, 12dB/oct on LF, 18dB/oct on HF
17x M8 points
®
2x NEUTRIK Speakon NL4MP (1+/1- Link, 2+/2- Input & Link)
Yes, 2 symmetric angles
35mm top hat
CNC made with tongue and grove assembly
15mm birch plywood
Touring grade textured black mat coating
330x540x320mm
16kg net, 19kg gross
VIEW
© VERITY PRO AUDIO, Lille, France - all rights reserved
17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising