Error Message Reference
Tivoli Access Manager
®
Version 6.1
Error Message Reference
GI11-8157-00
Tivoli Access Manager
®
Version 6.1
Error Message Reference
GI11-8157-00
Note
Before using this information and the product it supports, read the information in Appendix B, “Notices,” on page 863.
First Edition (April 2008)
This edition applies to version 6, release 1, modification 0 of IBM Tivoli Access Manager (product number 5724-C08)
and to all subsequent releases and modifications until otherwise indicated in new editions.
© Copyright International Business Machines Corporation 2001, 2008. All rights reserved.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.
Contents
About this publication
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Intended audience . . . . . . . . . . . .
What this publication contains . . . . . . . .
Publications . . . . . . . . . . . . . .
IBM Tivoli Access Manager for e-business library .
Related products and publications. . . . . .
Accessing terminology online . . . . . . .
Accessing publications online . . . . . . .
Ordering publications . . . . . . . . . .
Accessibility . . . . . . . . . . . . . .
Tivoli technical training . . . . . . . . . . .
Support information . . . . . . . . . . . .
Conventions used in this publication . . . . . .
Typeface conventions . . . . . . . . . .
Operating system-dependent variables and paths .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. v
. v
. v
. v
. vii
. ix
. ix
. ix
. x
. x
. x
. x
. x
. xi
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Chapter 1. Tivoli Access Manager Base Messages . . . . . . . . . . . . . . . . . 1
Chapter 2. Tivoli Access Manager for e-business WebSEAL Messages . . . . . . . . 225
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
253
Chapter 4. Tivoli Access Manager for e-business Messages for Session Management
Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373
Chapter 5. Tivoli Access Manager for e-business Messages for IBM WebSphere Edge
Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429
Chapter 6. Tivoli Access Manager for e-business Messages for Web Runtime
. . . . 475
Chapter 7. Tivoli Access Manager for Operating Systems Messages . . . . . . . . . 573
Chapter 8. IBM Global Security Kit return codes . . . . . . . . . . . . . . . . . 803
General return codes . . . .
Key management return codes
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 803
. 807
Chapter 9. Common Auditing and Reporting Services messages . . . . . . . . . . 813
Appendix A. Support information . . . . . . . . . . . . . . . . . . . . . . . . 857
Searching knowledge bases . . . . . . . . .
Searching information centers . . . . . . .
Searching the Internet . . . . . . . . .
Obtaining fixes . . . . . . . . . . . . .
Registering with IBM Software Support . . . .
Receiving weekly software updates . . . . . .
Contacting IBM Software Support . . . . . .
Determining the business impact . . . . . .
Describing problems and gathering information .
Submitting problems . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
857
857
857
857
858
858
859
859
860
860
Appendix B. Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 863
Trademarks .
.
.
.
.
.
.
© Copyright IBM Corp. 2001, 2008
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 865
iii
iv
Error Message Reference
About this publication
The IBM Tivoli Access Manager for e-business: Error Message Reference provides a list
of all informational, warning, and error messages associated with IBM Tivoli
Access Manager
Intended audience
This book is intended for system administrators who are responsible for
maintaining and troubleshooting Tivoli Access Manager.
What this publication contains
This reference contains the following
v Chapter 1, “Tivoli Access Manager
v Chapter 2, “Tivoli Access Manager
225
v Chapter 3, “Tivoli Access Manager
Messages,” on page 253
v Chapter 4, “Tivoli Access Manager
Management Server,” on page 373
sections:
Base Messages,” on page 1
for e-business WebSEAL Messages,” on page
for e-business Plug-in for Web Servers
for e-business Messages for Session
v Chapter 5, “Tivoli Access Manager for e-business Messages for IBM WebSphere
Edge Server,” on page 429
v Chapter 6, “Tivoli Access Manager for e-business Messages for Web Runtime,”
on page 475
v Chapter 7, “Tivoli Access Manager for Operating Systems Messages,” on page
573
v Chapter 8, “IBM Global Security Kit return codes,” on page 803
v Chapter 9, “Common Auditing and Reporting Services messages,” on page 813
Publications
This section lists publications in the IBM Tivoli Access Manager for e-business
library and related documents. The section also describes how to access Tivoli
publications online and how to order Tivoli publications.
IBM Tivoli Access Manager for e-business library
Review the descriptions of the Tivoli Access Manager library, the prerequisite
publications, and the related publications to determine which publications you
might find helpful. After you determine the publications you need, refer to the
instructions for accessing publications online.
Additional information about the Tivoli Access Manager for e-business product
itself can be found at the following Web address:
http://www.ibm.com/software/tivoli/products/access-mgr-e-bus
The Tivoli Access Manager library is organized into the following categories:
v “Release information” on page vi
© Copyright IBM Corp. 2001, 2008
v
v
v
v
v
v
“Installation and upgrade documentation”
“Administration documentation”
“Reference documentation” on page vii
“Problem determination documentation” on page vii
“Performance tuning documentation” on page vii
Release information
v IBM Tivoli Access Manager for e-business: Release Notes, GC23-6501-00
Provides information about installing and getting started, system requirements,
known installation and configuration problems, and problem workarounds.
Installation and upgrade documentation
v IBM Tivoli Access Manager for e-business: Installation Guide, GC23-6502-00
Explains how to install and configure Tivoli Access Manager for e-business.
v IBM Tivoli Access Manager for e-business: Upgrade Guide, SC23-6503-00
Explains how to upgrade to Tivoli Access Manager for e-business version 6.1.
v IBM Tivoli Access Manager for e-business: Quick Start Guide, GI11-8174-00
Provides a high-level overview of a Tivoli Access Manager for e-business version
6.1 installation.
Administration documentation
v IBM Tivoli Access Manager for e-business: Administration Guide, SC23-6504-00
Describes the concepts and procedures for using Tivoli Access Manager. Provides
instructions for performing tasks from the Web Portal Manager interface and by
using the pdadmin utility.
v IBM Tivoli Access Manager for e-business: WebSEAL Administration Guide,
SC23-6505-00
Provides background material, administrative procedures, and technical
reference information for using WebSEAL to manage the resources of your
secure Web domain.
v IBM Tivoli Access Manager for e-business: Plug-in for Edge Server Administration
Guide, SC23-6506-00
Provides administration instructions for integrating Tivoli Access Manager with
the IBM® WebSphere® Edge Server application.
v IBM Tivoli Access Manager for e-business: Plug-in for Web Servers Administration
Guide, SC23-6507-00
Provides administration procedures, and technical reference information for
securing your Web domain using a Web server plug-in.
v IBM Tivoli Access Manager for e-business: Shared Session Management Administration
Guide, SC23-6509-00
Provides deployment considerations and operational instructions for the session
management server.
v IBM Global Security Kit: Secure Sockets Layer Introduction and iKeyman User’s Guide,
SC23-6510-00
Provides information for network or system security administrators who plan to
enable SSL communication in their Tivoli Access Manager environment.
v IBM Tivoli Access Manager for e-business: Auditing Guide, SC23-6511-00
Provides information about configuring and managing audit events using the
native Tivoli Access Manager approach and the Common Auditing and
vi
Error Message Reference
Reporting Service. Information about installing and configuring the Common
Auditing and Reporting Service that can be used for generating and viewing
operational reports is also provided.
Reference documentation
v IBM Tivoli Access Manager for e-business: Command Reference, SC23-6512-00
Provides reference information about the commands, utilities, and scripts that
are provided with Tivoli Access Manager.
v IBM Tivoli Access Manager for e-business: Administration C API Developer Reference,
SC23-6513-00
Provides reference information about using the C language implementation of
the administration API to enable an application to perform Tivoli Access
Manager administration tasks.
v IBM Tivoli Access Manager for e-business: Administration Java Classes Developer
Reference, SC23-6514-00
Provides reference information about using the Java™ language implementation
of the administration API to enable an application to perform Tivoli Access
Manager administration tasks.
v IBM Tivoli Access Manager for e-business: Authorization C API Developer Reference,
SC23-6515-00
Provides reference information about using the C language implementation of
the authorization API to enable an application to use Tivoli Access Manager
security.
v IBM Tivoli Access Manager for e-business: Authorization Java Classes Developer
Reference, SC23-6516-00
Provides reference information about using the Java language implementation of
the authorization API to enable an application to use Tivoli Access Manager
security.
v IBM Tivoli Access Manager for e-business: Web Security Developer Reference,
SC23-6517-00
Provides programming and reference information for developing authentication
modules.
Problem determination documentation
v IBM Tivoli Access Manager for e-business: Problem Determination Guide,
GI11-8156-00
Provides problem determination information for Tivoli Access Manager.
v IBM Tivoli Access Manager for e-business: Error Message Reference, GI11-8157-00
Provides explanations and recommended actions for the messages and return
code that are generated by Tivoli Access Manager.
Performance tuning documentation
v IBM Tivoli Access Manager for e-business: Performance Tuning Guide, SC23-6518-00
Provides performance tuning information for an environment consisting of Tivoli
Access Manager with the IBM Tivoli Directory Server as the user registry.
Related products and publications
This section lists the IBM products that are related to and included with a Tivoli
Access Manager solution.
About this publication
vii
IBM Global Security Kit
Tivoli Access Manager provides data encryption through the use of the Global
Security Kit (GSKit) version 7.0. GSKit is included on the IBM Tivoli Access Manager
Base CD for your particular platform, as well as on the IBM Tivoli Access Manager
Web Security CDs, the IBM Tivoli Access Manager Shared Session Management CDs,
and the IBM Tivoli Access Manager Directory Server CDs.
The GSKit package provides the iKeyman key management utility, gsk7ikm, which
is used to create key databases, public-private key pairs, and certificate requests.
The IBM Global Security Kit: Secure Sockets Layer Introduction and iKeyman User’s
Guide is available on the Tivoli® Information Center Web site in the same section as
the Tivoli Access Manager product documentation.
IBM Tivoli Directory Server
IBM Tivoli Directory Server version 6.1 is included on the IBM Tivoli Access
Manager Directory Server set of CDs for the desired operating system.
Additional information about Tivoli Directory Server can be found at the following
Web address:
http://www.ibm.com/software/tivoli/products/directory-server/
IBM Tivoli Directory Integrator
IBM Tivoli Directory Integrator version 6.1.1 is included on the IBM Tivoli
Directory Integrator CD for the desired operating system.
Additional information about IBM Tivoli Directory Integrator can be found at the
following Web address:
http://www-306.ibm.com/software/tivoli/products/directory-integrator/
IBM DB2 Universal Database
IBM DB2 Universal Database™ Enterprise Server Edition version 9.1 is provided on
the IBM Tivoli Access Manager Directory Server set of CDs and is installed with the
Tivoli Directory Server software. DB2® is required when using Tivoli Directory
Server or z/OS® LDAP servers as the user registry for Tivoli Access Manager. For
z/OS LDAP servers, you must separately purchase DB2.
Additional information about DB2 can be found at the following Web address:
http://www.ibm.com/software/data/db2
IBM WebSphere Application Server
WebSphere Application Server version 6.1 is included on the IBM Tivoli Access
Manager WebSphere Application Server set of CDs for the desired operating system.
WebSphere Application Server enables the support of the Web Portal Manager
interface, which is used to administer Tivoli Access Manager; the Web
Administration Tool, which is used to administer Tivoli Directory Server; the
Common Auditing and Reporting Service, which is used to process and report on
audit events; the session management server, which is used to managed shared
session in a Web security server environment and the Attribute Retrieval Service.
Additional information about WebSphere Application Server can be found at the
following Web address:
http://www.ibm.com/software/webservers/appserv/infocenter.html
viii
Error Message Reference
Accessing terminology online
The Tivoli Software Glossary includes definitions for many of the technical terms
related to Tivoli software. The Tivoli Software Glossary is available at the following
Tivoli software library Web site:
http://publib.boulder.ibm.com/tividd/glossary/tivoliglossarymst.htm
The IBM Terminology Web site consolidates the terminology from IBM product
libraries in one convenient location. You can access the Terminology Web site at the
following Web address:
http://www.ibm.com/software/globalization/terminology
Accessing publications online
The Tivoli Software Library provides a variety of Tivoli publications such as white
papers, data sheets, demonstrations, Redbooks™, and announcement letters. The
publications for this product and many other Tivoli products are available online
in Portable Document Format (PDF) or Hypertext Markup Language (HTML)
format, or both in the Tivoli software library at the following Web address:
http://publib.boulder.ibm.com/tividd/td/tdprodlist.html
To locate product publications in the library, click the first letter of the product
name or scroll until you find the product name. Then click the name of the
product. Product publications include release notes, installation guides, user’s
guides, administrator’s guides, and developer’s references.
Note: To ensure proper printing of PDF publications, select the Fit to page check
box in the Adobe Acrobat Print window (which is available when you click
File → Print).
Ordering publications
You can order many Tivoli publications online at http://
www.elink.ibmlink.ibm.com/publications/servlet/pbi.wss.
You can also order by telephone by calling one of these numbers:
v In the United States: 800-879-2755
v In Canada: 800-426-4968
In other countries, contact your software account representative to order Tivoli
publications. To locate the telephone number of your local representative, perform
the following steps:
1. Go to http://www.elink.ibmlink.ibm.com/publications/servlet/pbi.wss.
2. Select your country from the list and click Go.
3. Click About this site in the main panel to see an information page that
includes the telephone number of your local representative.
About this publication
ix
Accessibility
Accessibility features help users with a physical disability, such as restricted
mobility or limited vision, to use software products successfully. With this product,
you can use assistive technologies to hear and navigate the interface. You can also
use the keyboard instead of the mouse to operate all features of the graphical user
interface.
Tivoli technical training
For Tivoli technical training information, refer to the following IBM Tivoli
Education Web site at http://www.ibm.com/software/tivoli/education.
Support information
If you have a problem with your IBM software, you want to resolve it quickly. IBM
provides the following ways for you to obtain the support you need:
Online
Go to the IBM Software Support site at http://www.ibm.com/software/
supportand follow the instructions.
IBM Support Assistant
The IBM Support Assistant (ISA) is a free local software serviceability
workbench that helps you resolve questions and problems with IBM
software products. The ISA provides quick access to support-related
information and serviceability tools for problem determination. To install
the ISA software, go to http://www.ibm.com/software/support/isa.
Problem Determination Guide
For more information about resolving problems, see the IBM Tivoli Access
Manager for e-business: Problem Determination Guide.
Conventions used in this publication
This publication uses several conventions for special terms and actions, operating
system-dependent commands and paths, and margin graphics.
Typeface conventions
This publication uses the following typeface conventions:
Bold
v Lowercase commands and mixed case commands that are otherwise
difficult to distinguish from surrounding text
v Interface controls (check boxes, push buttons, radio buttons, spin
buttons, fields, folders, icons, list boxes, items inside list boxes,
multicolumn lists, containers, menu choices, menu names, tabs, property
sheets), labels (such as Tip:, and Operating system considerations:)
v Keywords and parameters in text
Italic
v Citations (examples: titles of publications, diskettes, and CDs
v Words defined in text (example: a nonswitched line is called a
point-to-point line)
x
Error Message Reference
v Emphasis of words and letters (words as words example: "Use the word
that to introduce a restrictive clause."; letters as letters example: "The
LUN address must start with the letter L.")
v New terms in text (except in a definition list): a view is a frame in a
workspace that contains data.
v Variables and values you must provide: ... where myname represents....
Monospace
v Examples and code examples
v File names, programming keywords, and other elements that are difficult
to distinguish from surrounding text
v Message text and prompts addressed to the user
v Text that the user must type
v Values for arguments or command options
Operating system-dependent variables and paths
This publication uses the UNIX convention for specifying environment variables
and for directory notation.
When using the Windows command line, replace $variable with % variable% for
environment variables and replace each forward slash (/) with a backslash (\) in
directory paths. The names of environment variables are not always the same in
the Windows and UNIX environments. For example, %TEMP% in Windows
environments is equivalent to $TMPDIR in UNIX environments.
Note: If you are using the bash shell on a Windows system, you can use the UNIX
conventions.
About this publication
xi
xii
Error Message Reference
Chapter 1. Tivoli Access Manager Base Messages
This chapter describes the messages provided by the Tivoli Access Manager Base.
HPDAC0153E Could not build ACL with the
supplied ACL entries.
Explanation: An ACL entry failed the validity check.
The Tivoli Access Manager policy server’s error log file
will contain an error status message indicating the
reason for the failure.
Action: Review the Tivoli Access Manager policy
server’s error log to determine the reason that the ACL
failed the validity check.
Action: See the accompanying status code, which
gives more information about the failure.
Name: ivacl_s_could_not_start
Number: 0x1005b0b4 (268808372)
Severity: Fatal
Component: acl / ivacl_s_general
Name: ivacl_s_cant_build_acl
HPDAC0450E There is no root ACL in the
authorization policy database.
Number: 0x1005b099 (268808345)
Explanation: See message.
Severity: Error
Action: This is a severe error indicating integrity
problems with the policy database. If the problem
occurs with the Tivoli Access Manager authorization
server or with a Tivoli Access Manager resource
manager application, then stop the resource manager,
remove the resource manager’s policy database, and
start the resource manager again. If the problem occurs
with the Tivoli Access Manager policy server, then stop
the policy server, restore a known good version of the
master policy database, and then start the Tivoli Access
Manager servers again. If the problem persists then
contact your IBM service representative.
Component: acl / ivacl_s_general
HPDAC0178E Could not obtain local host name.
Explanation: The system library call to get the local
host name failed.
Action: Ensure that the machine has a valid hostname.
Name: ivacl_s_hostname_failure
Number: 0x1005b0b2 (268808370)
Severity: Error
Component: acl / ivacl_s_general
Name: ivacl_s_no_root_acl
Number: 0x1005b1c2 (268808642)
Severity: Error
HPDAC0179E Unexpected exception caught.
Component: acl / ivacl_s_acldb
Explanation: An unexpected exception was caught
while registering an azn administration service with the
Tivoli Access Manager policy server.
HPDAC0451E A protected object should have only
one attached ACL (%s).
Action: Ensure that the Tivoli Access Manager policy
server is running and that the client and server
versions are compatible with each other.
Name: ivacl_s_unexpected_exception
Number: 0x1005b0b3 (268808371)
Severity: Error
Component: acl / ivacl_s_general
HPDAC0180E The Tivoli Access Manager
authorization server could not be started
(0x%8.8lx).
Explanation: The Tivoli Access Manager authorization
server encountered an error during initialization.
© Copyright IBM Corp. 2001, 2008
Explanation: See message.
Action: This is a severe error indicating integrity
problems with the policy database. If the problem
occurs with the Tivoli Access Manager authorization
server or with a Tivoli Access Manager resource
manager application, then stop the resource manager,
remove the resource manager’s policy database, and
start the resource manager again. If the problem occurs
with the Tivoli Access Manager policy server, then stop
the policy server, restore a known good version of the
master policy database, and then start the Tivoli Access
Manager servers again. If the problem persists then
contact your IBM service representative.
Name: ivacl_s_attached_acl
Number: 0x1005b1c3 (268808643)
1
Severity: Error
Component: acl / ivacl_s_acldb
HPDAC0452E An ACL that is attached to a protected
object cannot be found in the policy
database (%s,%s).
Explanation: See message.
Action: This is a severe error indicating integrity
problems with the policy database. If the problem
occurs with the Tivoli Access Manager authorization
server or with a Tivoli Access Manager resource
manager application, then stop the resource manager,
remove the resource manager’s policy database, and
start the resource manager again. If the problem occurs
with the Tivoli Access Manager policy server, then stop
the policy server, restore a known good version of the
master policy database, and then start the Tivoli Access
Manager servers again. If the problem persists then
contact your IBM service representative.
HPDAC0455E The authorization policy database has
not been initialized.
Explanation: An error occurred during application
initialization and the authorization policy database was
not initialized correctly.
Action: Review the Tivoli Access Manager base error
log and look for error messages during initialization
that might account for problems with the authorization
policy database.
Name: ivacl_s_authzn_db_not_found
Number: 0x1005b1c7 (268808647)
Severity: Error
Component: acl / ivacl_s_acldb
HPDAC0456E The ACL name specified was not
found in the authorization policy
database.
Name: ivacl_s_missing_acl
Explanation: See message.
Number: 0x1005b1c4 (268808644)
Action: Review the ACL name and ensure that the
name is a valid ACL name and that it matches an ACL
that exists in the authorization policy database.
Severity: Error
Component: acl / ivacl_s_acldb
HPDAC0453E Authorization policy database version
is incompatible with the server version
(%ld,%ld) and will be automatically
replaced.
Explanation: The authorization client application has
detected an incompatible version of the policy
database. The database is replaced automatically.
Action: No action is required.
Name: ivacl_s_incompatible_db
Number: 0x1005b1c5 (268808645)
Severity: Error
Component: acl / ivacl_s_acldb
HPDAC0454E Could not initialize the authorization
policy database (0x%8.8lx).
Explanation: An error occurred while attempting to
access the authorization policy database. The
authorization engine client was not initialized correctly.
Name: ivacl_s_acl_not_found
Number: 0x1005b1c8 (268808648)
Severity: Error
Component: acl / ivacl_s_acldb
HPDAC0457E The protected object name is invalid.
Explanation: The protected object name is invalid. The
name must begin with the ’/’ character. The name
cannot contain carriage return or line-feed characters
and it cannot contain two ’/’ characters in sequence.
Action: Review the protected object name and ensure
that it adheres to the restrictions outlined in the
message explanation.
Name: ivacl_s_invalid_pobj_name
Number: 0x1005b1c9 (268808649)
Severity: Error
Component: acl / ivacl_s_acldb
Action: See the accompanying status code, which
gives more information about failure.
HPDAC0458E The protected object name specified
was not found in the authorization
policy database.
Name: ivacl_s_authzn_db_init
Explanation: See message.
Number: 0x1005b1c6 (268808646)
Action: Review the protected object name and ensure
that the name is a valid protected object name and that
it matches an object that exists in the authorization
policy database.
Severity: Error
Component: acl / ivacl_s_acldb
Name: ivacl_s_pobj_not_found
2
Error Message Reference
Number: 0x1005b1ca (268808650)
Name: ivacl_s_invalid_extattr_name
Severity: Error
Number: 0x1005b1ce (268808654)
Component: acl / ivacl_s_acldb
Severity: Error
Component: acl / ivacl_s_acldb
HPDAC0459E The protected object space specified
was not found in the authorization
policy database.
Explanation: See message.
Action: Review the protected object space name and
ensure that the name is a valid protected object space
name and that it matches an object space that exists in
the authorization policy database.
Name: ivacl_s_pobjspace_not_found
Number: 0x1005b1cb (268808651)
Severity: Error
Component: acl / ivacl_s_acldb
HPDAC0460E The protected object space specified
already exists in the authorization policy
database.
Explanation: See message.
Action: Each protected object space name must be
unique so choose a different name for the new
protected object space.
HPDAC0463E There are no extended attributes
associated with the specified protected
object or authorization policy object.
Explanation: See message.
Action: Define extended attributes for specified object
or parent object if you want to perform extended
attributes associated with the object.
Name: ivacl_s_extattrs_not_found
Number: 0x1005b1cf (268808655)
Severity: Error
Component: acl / ivacl_s_acldb
HPDAC0464E A POP that is attached to a protected
object cannot be found in the policy
database (%s,%s).
Explanation: See message.
HPDAC0461E The extended attribute specified was
not found.
Action: This is a severe error indicating integrity
problems with the policy database. If the problem
occurs with the Tivoli Access Manager authorization
server or with a Tivoli Access Manager resource
manager application, then stop the resource manager,
remove the resource manager’s policy database, and
start the resource manager again. If the problem occurs
with the Tivoli Access Manager policy server, then stop
the policy server, restore a known good version of the
master policy database, and then start the Tivoli Access
Manager servers again. If the problem persists then
contact your IBM service representative.
Explanation: See message.
Name: ivacl_s_missing_pop
Action: Review the extended attributes on the target
object and ensure that the extended attribute requested
actually exists in the extended attribute list for this
object.
Number: 0x1005b1d0 (268808656)
Name: ivacl_s_pobjspace_already_exists
Number: 0x1005b1cc (268808652)
Severity: Error
Component: acl / ivacl_s_acldb
Severity: Error
Component: acl / ivacl_s_acldb
Name: ivacl_s_extattr_not_found
Number: 0x1005b1cd (268808653)
Severity: Error
Component: acl / ivacl_s_acldb
HPDAC0462E The extended attribute name specified
is invalid.
Explanation: See message.
Action: Review the extended attribute name to ensure
that it is valid.
HPDAC0465E A new action group could not be
created because the count of action
groups has reached the maximum
permitted.
Explanation: See message.
Action: If you want to create another action group,
then you must first reduce the count of defined action
groups. Review the list of defined action groups and
remove those that are no longer required.
Name: ivacl_s_no_available_action_groups
Number: 0x1005b1d1 (268808657)
Chapter 1. Tivoli Access Manager Base Messages
3
Severity: Error
Number: 0x1005b1d5 (268808661)
Component: acl / ivacl_s_acldb
Severity: Error
Component: acl / ivacl_s_acldb
HPDAC0466E A new action could not be created
because the count of actions has reached
the maximum permitted.
Explanation: See message.
Action: Before creating another action you must first
reduce the count of defined actions. Review the list of
defined actions and remove those that are no longer
required.
Name: ivacl_s_no_available_actions
Number: 0x1005b1d2 (268808658)
Severity: Error
Component: acl / ivacl_s_acldb
HPDAC0467E Unable to create the new action
because the bitmask supplied is invalid.
Explanation: The bitmask must have only one of bits
0 to 31 set to be a valid action bitmask. Having
multiple bits set or no bits at all is invalid.
Action: Review the specified action bitmask to ensure
that at least one and only one action bit is set in the
mask.
Name: ivacl_s_bad_action_bitmap
Number: 0x1005b1d3 (268808659)
Severity: Error
Component: acl / ivacl_s_acldb
HPDAC0468E Unable to create new action group
because an action group exists with the
same name.
Explanation: See message.
Action: You must choose a unique name for the new
action group.
HPDAC0470E Unable to create the new action
because an action exists with the same
name.
Explanation: See message.
Action: You must choose a unique action name for the
new action.
Name: ivacl_s_duplicate_action_name
Number: 0x1005b1d6 (268808662)
Severity: Error
Component: acl / ivacl_s_acldb
HPDAC0471E Action name contains invalid
characters or too many characters.
Explanation: The action name specified is invalid. The
name must not be NULL and can contain only one
character from the set [a-zA-Z].
Action: Review the action name and ensure that it
conforms to the criteria specified in the Tivoli Access
Manager Base Administrator’s Guide.
Name: ivacl_s_invalid_action_name
Number: 0x1005b1d7 (268808663)
Severity: Error
Component: acl / ivacl_s_acldb
HPDAC0472E Action group name contains invalid
characters.
Explanation: The action group name specified is
invalid. The name must not be NULL and can contain
only characters from the set [a-zA-Z0-9 +-_:].
Name: ivacl_s_duplicate_action_group_ name
Action: Review the action group name and ensure
that it conforms to the criteria specified in the Tivoli
Access Manager Base Administrator’s Guide.
Number: 0x1005b1d4 (268808660)
Name: ivacl_s_invalid_action_group_name
Severity: Error
Number: 0x1005b1d8 (268808664)
Component: acl / ivacl_s_acldb
Severity: Error
Component: acl / ivacl_s_acldb
HPDAC0469E Unable to locate an action group with
the name supplied.
Explanation: See message.
Action: Review the action group name specified and
ensure that it is a valid action group name and that the
group exists.
Name: ivacl_s_action_group_name_not_ found
4
Error Message Reference
HPDAC0473E The primary action group cannot be
deleted.
Explanation: See message.
Action: No action is required.
Name: ivacl_s_cant_delete_primary_group
Number: 0x1005b1d9 (268808665)
Severity: Error
Component: acl / ivacl_s_acldb
HPDAC0474E A protected object should have only
one rule attached (%s).
Explanation: See message.
Action: This is a severe error indicating integrity
problems with the policy database. If the problem
occurs with the Tivoli Access Manager authorization
server or with a Tivoli Access Manager resource
manager application, then stop the resource manager,
remove the resource manager’s policy database, and
start the resource manager again. If the problem occurs
with the Tivoli Access Manager policy server, then stop
the policy server, restore a known good version of the
master policy database, and then start the Tivoli Access
Manager servers again. If the problem persists then
contact your IBM service representative.
server or with a Tivoli Access Manager resource
manager application, then stop the resource manager,
remove the policy database of the resource manager,
and start the resource manager again. If the problem
occurs with the Tivoli Access Manager policy server,
then stop the policy server, restore a known good
version of the master policy database, and then start
the Tivoli Access Manager servers again. If the problem
persists then contact your IBM service representative.
Name: ivacl_s_attached_pop
Number: 0x1005b1dc (268808668)
Severity: Error
Component: acl / ivacl_s_acldb
HPDAC0477I No local extended attributes were
found for protected object (%s).
Explanation: The specified protected object does not
have extended attributes defined at the object.
Number: 0x1005b1da (268808666)
Action: Define extended attributes for the specified
protected object if you want extended attributes
defined locally at the object.
Severity: Error
Name: ivacl_s_extattrs_not_found_local
Component: acl / ivacl_s_acldb
Number: 0x1005b1dd (268808669)
Name: ivacl_s_attached_rule
Severity: Notice
HPDAC0475E A rule that is attached to a protected
object cannot be found in the policy
database (%s,%s).
Explanation: See message.
Action: This is a severe error indicating integrity
problems with the policy database. If the problem
occurs with the Tivoli Access Manager authorization
server or with a Tivoli Access Manager resource
manager application, then stop the resource manager,
remove the resource manager’s policy database, and
start the resource manager again. If the problem occurs
with the Tivoli Access Manager policy server, then stop
the policy server, restore a known good version of the
master policy database, and then start the Tivoli Access
Manager servers again. If the problem persists then
contact your IBM service representative.
Name: ivacl_s_missing_rule
Number: 0x1005b1db (268808667)
Severity: Error
Component: acl / ivacl_s_acldb
HPDAC0476E A protected object should have only
one POP attached (%s).
Component: acl / ivacl_s_acldb
HPDAC0478I No effective or local extended
attributes were found for protected
object (%s).
Explanation: When extended attributes are used they
are defined for specific protected objects. When there
are no extended attributes defined for a specific
protected object, effective extended attributes are used
if they are defined. Effective extended attributes are
extended attributes inherited from the fist parent
protected object that has extended attributes defined.
Action: Define extended attributes for the specified
protected object or for a parent protected object if you
want extended attributes for the object or effective
extended attributes inherited from a parent protected
object.
Name: ivacl_s_extattrs_not_found_ effective
Number: 0x1005b1de (268808670)
Severity: Notice
Component: acl / ivacl_s_acldb
Explanation: See message.
Action: This is a severe error indicating integrity
problems with the policy database. If the problem
occurs with the Tivoli Access Manager authorization
Chapter 1. Tivoli Access Manager Base Messages
5
HPDAC0750E Invalid ACL name.
Explanation: The ACL name received was invalid. The
ACL name contained illegal characters or was NULL.
Action: Review the ACL name and ensure that it
conforms to the criteria specified in the Tivoli Access
Manager Base Administrator’s Guide.
Name: ivacl_s_invalid_acl_name
Number: 0x1005b2ee (268808942)
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC0754E Privacy or data integrity quality of
protection cannot be specified in the
unauthenticated entry.
Explanation: Quality of protection cannot be enforced
by the authorization client runtime for unauthenticated
users.
Action: No action is required.
Name: ivacl_s_cant_have_unauth_qop
Number: 0x1005b2f2 (268808946)
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC0751E Invalid protected object name.
Explanation: The protected object name received was
invalid. The protected object name contained illegal
characters or was NULL.
Action: Review the protected object name and ensure
that it conforms to the criteria specified in the Tivoli
Access Manager Base Administrator’s Guide.
Name: ivacl_s_invalid_object_name
Number: 0x1005b2ef (268808943)
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC0752E The requested object was not found.
Explanation: See message.
Action: Review the object name and ensure that it is
valid and that it actually exists.
Name: ivacl_s_object_not_found
Number: 0x1005b2f0 (268808944)
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC0755E The ACL has an unauthenticated entry
but there is no any-other entry. The
any-other entry must be at least as
permissive as unauthenticated.
Explanation: See message.
Action: Add an any-other entry to the ACL with
permissions at least equal to those of the
unauthenticated user.
Name: ivacl_s_missing_any_other_entry
Number: 0x1005b2f3 (268808947)
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC0756E The any-other entry is missing actions
from the unauthenticated entry. The
any-other entry must be at least as
permissive as unauthenticated.
Explanation: See message.
Action: Ensure that the permissions in the ACL for the
any-other entry are at least equal to those of the
unauthenticated entry.
Name: ivacl_s_missing_any_other_perms
HPDAC0753E The ACL action specified could not be
mapped.
Explanation: There is no mapping for this ACL action
in the policy database.
Action: Review the ACL name and ensure that it is
valid and refers to an existing ACL action in the policy
database.
Number: 0x1005b2f4 (268808948)
Severity: Error
Component: acl / ivacl_s_mgmt
Number: 0x1005b2f1 (268808945)
HPDAC0757E An entry in the ACL is missing some
actions granted by the unauthenticated
entry. Users can bypass an explicit
action revocation if allowed by the
unauthenticated entry.
Severity: Error
Explanation: See message.
Component: acl / ivacl_s_mgmt
Action: Review the ACL and ensure that the
unauthenticated entry does not have the permission to
perform actions that other authenticated entries cannot.
The permissions of the unauthenticated entry should be
Name: ivacl_s_unknown_action
6
Error Message Reference
the most restrictive in the secure domain.
Component: acl / ivacl_s_mgmt
Name: ivacl_s_missing_entry_perms
Severity: Error
HPDAC0766E The ACL cannot be detached from the
root protected object. Try replacing the
attached ACL instead.
Component: acl / ivacl_s_mgmt
Explanation: See message.
Number: 0x1005b2f5 (268808949)
HPDAC0758E An entry in the ACL that grants
control does not also grant traverse.
Explanation: To have the control permission the user
must also be able to traverse.
Action: Ensure that entries with the control
permission also have the traverse permission.
Action: Modify or even replace the root ACL with an
ACL of the desired configuration.
Name: ivacl_s_cant_detach_from_root
Number: 0x1005b2fe (268808958)
Severity: Error
Component: acl / ivacl_s_mgmt
Name: ivacl_s_control_entry_has_no_ traverse
Number: 0x1005b2f6 (268808950)
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC0767E Core ACL actions cannot be deleted.
Explanation: See message.
Action: No action is required.
Name: ivacl_s_cant_delete_core_action
HPDAC0759E No entry in the ACL grants control
permission.
Explanation: At least one entry in the ACL must have
the control permission. Otherwise the ACL cannot be
modified or deleted.
Action: Add the control permission to at least one of
the ACL entries. An administrative user is the most
suitable candidate because control permission will
authorize the user to modify and delete the ACL.
Name: ivacl_s_no_control_entry
Number: 0x1005b2f7 (268808951)
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC0760E The user is revoking the control
permission for itself on this ACL.
Explanation: If the current user removes the control
permission from its own ACL entry, that user can no
longer modify or delete the object. If the user were the
only user with control permission then the ACL can no
longer be modified or deleted. To avoid losing control
over the ACL, it is more prudent to have another user
who has control permission remove the control
permission on behalf of the current user.
Action: Login as another user who has the control
permission for this ACL and have that user remove the
control permission on behalf of the current user.
Number: 0x1005b2ff (268808959)
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC0768E The ACL action name already exists.
Explanation: See message.
Action: Choose a unique action name for the new
action.
Name: ivacl_s_action_exists
Number: 0x1005b300 (268808960)
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC0769E Too many ACL actions are already
defined.
Explanation: Only 32 actions bits can be defined and
this limit has been reached.
Action: An ACL action must be deleted before a new
action can be created.
Name: ivacl_s_too_many_actions
Number: 0x1005b301 (268808961)
Severity: Error
Component: acl / ivacl_s_mgmt
Name: ivacl_s_self_cannot_control
Number: 0x1005b2f8 (268808952)
Severity: Error
Chapter 1. Tivoli Access Manager Base Messages
7
HPDAC0771E The user registry client is unavailable.
Explanation: The authorization client was unable to
contact the user registry. The user registry client may
not be configured correctly.
Action: Refer to the Installation Guide for your chosen
platform and ensure that the correct user registry has
been specified and that the configuration steps
succeeded. Also ensure that the user registry is running
and can be contacted from the client machine. The
Tivoli Access Manager Problem Determination Guide
contains instructions on how to ensure that the user
registry is configured correctly and is operational.
HPDAC0776E The DN specified was not found in
the registry.
Explanation: The specified DN was not found in the
user registry.
Action: Ensure that the DN specified exists in the user
registry and is valid.
Name: ivacl_s_registry_client_dn_ not_found
Number: 0x1005b308 (268808968)
Severity: Error
Component: acl / ivacl_s_mgmt
Name: ivacl_s_registry_client_unavailable_
Number: 0x1005b303 (268808963)
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC0772E The LDAP user registry client
returned an error status for the specified
DN.
Explanation: The LDAP client returned an error status
because the DN was invalid or there are multiples of
the same DN.
Action: Ensure that the specified DN exists in the user
registry and is valid and that the DN is unique.
Name: ivacl_s_registry_client_bad_ ldap_dn
Number: 0x1005b304 (268808964)
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC0773E The LDAP user registry client
returned an unexpected failure status.
Explanation: The LDAP user registry client returned
an error code that was unexpected or unknown to
Tivoli Access Manager.
Action: Ensure that the LDAP registry server and local
registry client runtime are correctly installed and
operational then try the procedure again. The Tivoli
Access Manager Problem Determination Guide contains
instructions on how to ensure that the user registry is
configured correctly and is operational. If the problem
persists then contact your IBM service representative.
HPDAC0777E LDAP Registry client returned a
memory error.
Explanation: The LDAP registry client encountered a
memory error.
Action: Ensure that the affected process has been
configured with sufficient virtual memory for its
requirements. The Tivoli Access Manager Performance
Tuning Guide contains instructions on how to ensure
that the application is configured with the correct
amount of virtual memory. Stop and restart the process.
If the problem persists then contact your IBM service
representative.
Name: ivacl_s_registry_client_memory_ error
Number: 0x1005b309 (268808969)
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC0778E The specified user’s account is set to
invalid.
Explanation: When an account is created in the user
registry, the user account must also be marked as valid.
Action: Start the administration console or
command-line administration tool and set the user
account to be valid with the ’user modify’ command.
Name: ivacl_s_account_set_invalid
Number: 0x1005b30a (268808970)
Severity: Error
Component: acl / ivacl_s_mgmt
Name: ivacl_s_registry_client_error
HPDAC0779E The LDAP registry server is down.
Number: 0x1005b305 (268808965)
Explanation: The LDAP registry server is not running.
Severity: Error
Action: Ensure that the LDAP registry server is
running and that the LDAP client has been correctly
configured to communicate with the server. The Tivoli
Access Manager Problem Determination Guide contains
instructions on how to ensure that the user registry is
configured correctly and is operational.
Component: acl / ivacl_s_mgmt
8
Error Message Reference
Name: ivacl_s_registry_server_down
Number: 0x1005b30b (268808971)
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC0780E A valid action group is specified, but
no action is specified.
Explanation: The permission string contains a valid
action group, but no action within this group is
specified. Therefore, an authorization check cannot be
performed.
Action: Ensure that a valid action for the specified
action group was provided.
Name: ivacl_s_no_action_specified
HPDAC0906E An invalid parameter was supplied to
the API function.
Explanation: A parameter supplied to the API
function was NULL or outside the range of valid
values.
Action: Ensure that the API function call parameters
supplied meet the criteria defined for the API interface
in the Tivoli Access Manager Authorization C API
Developer’s Reference. If the problem persists then
contact your IBM service representative.
Name: ivacl_s_bad_param
Number: 0x1005b38a (268809098)
Severity: Error
Component: acl / ivacl_s_client
Number: 0x1005b30c (268808972)
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC0901E The Authorization service is already
initialized.
Explanation: You cannot reinitialize the authorization
service once it has been initialized. The azn_shutdown()
interface must be called before the aznAPI client can be
initialized again.
HPDAC0909E An unspecified implementation
dependent error has occurred.
Explanation: A minor error could not be mapped to a
known message catalog category. The minor error
might be returned by an authorization service plug-in
without first being encoded using azn_util_errcode().
Another reason this occurs is that an authorization
client’s message catalogs might not be synchronized
with those of the Tivoli Access Manager authorization
server.
Severity: Error
Action: If you have loaded a custom authorization
service plug-in then ensure that the plug-in returns the
appropriate azn_status_t error codes from its exported
interfaces. If this is not the case, then the authorization
client’s message catalogs might not be synchronized
with those of the server. Upgrade the Tivoli Access
Manager Runtime package to the same level as the
server.
Component: acl / ivacl_s_client
Name: ivacl_s_unknown_minor_code
Action: Review your aznAPI application and ensure
that the azn_initialize() interface is called only once
during the execution of the program.
Name: ivacl_s_already_initialized
Number: 0x1005b385 (268809093)
Number: 0x1005b38d (268809101)
HPDAC0902E There was no authorization client
listener port specified.
Explanation: The authorization client requires a TCP
port to listen for authorization policy updates and azn
admin service requests.
Action: Ensure that you have specified a listening port
for the authorization client in the aznAPI client
configuration file or by using programmatic aznAPI
initialization attributes.
Name: ivacl_s_no_rpc_port
Number: 0x1005b386 (268809094)
Severity: Error
Component: acl / ivacl_s_client
Severity: Error
Component: acl / ivacl_s_client
HPDAC0910E An invalid policy cache mode value
was specified.
Explanation: See message.
Action: Ensure that the specified policy cache mode is
a valid mode from the set of modes defined in the
Tivoli Access Manager Authorization C API
Developer’s Reference.
Name: ivacl_s_invalid_init_mode
Number: 0x1005b38e (268809102)
Severity: Error
Component: acl / ivacl_s_client
Chapter 1. Tivoli Access Manager Base Messages
9
HPDAC0912E An invalid database file path value
was specified.
HPDAC0920E An invalid LDAP host port was
specified.
Explanation: See message.
Explanation: See message.
Action: Ensure that the specified database file path is
valid.
Action: Ensure that the LDAP server port specified is
valid.
Name: ivacl_s_invalid_init_db_file
Name: ivacl_s_invalid_init_ldap_port
Number: 0x1005b390 (268809104)
Number: 0x1005b398 (268809112)
Severity: Error
Severity: Error
Component: acl / ivacl_s_client
Component: acl / ivacl_s_client
HPDAC0914E An invalid policy cache refresh
interval value was specified.
HPDAC0923E An invalid LDAP server SSL keyfile
was specified.
Explanation: See message.
Explanation: The SSL keyfile could not be found, is
invalid or has inappropriate access permissions.
Action: Ensure that the policy cache refresh interval
specified is within the range of valid values specified in
the Tivoli Access Manager Authorization C API
Developer’s Reference.
Action: Ensure that the path to the LDAP server SSL
keyfile is correct that the file exists, is valid and has the
appropriate access permissions.
Name: ivacl_s_invalid_init_cache_ refresh_interval
Name: ivacl_s_invalid_init_ldap_ssl_ keyfile
Number: 0x1005b392 (268809106)
Number: 0x1005b39b (268809115)
Severity: Error
Severity: Error
Component: acl / ivacl_s_client
Component: acl / ivacl_s_client
HPDAC0915E An invalid listen flags value was
specified.
HPDAC0924E An invalid LDAP server SSL keyfile
DN was specified.
Explanation: The listen flags can be set to either
’enable’ or ’disable’.
Explanation: See message.
Action: Ensure that the listen flags configuration
parameter is set to either ’enable’ or ’disable’.
Name: ivacl_s_invalid_init_listen_flags
Number: 0x1005b393 (268809107)
Severity: Error
Action: Ensure that the specified DN for the LDAP
server SSL keyfile is correct.
Name: ivacl_s_invalid_init_ldap_ssl_ keyfile_dn
Number: 0x1005b39c (268809116)
Severity: Error
Component: acl / ivacl_s_client
Component: acl / ivacl_s_client
HPDAC0919E An invalid LDAP host name was
specified.
Explanation: See message.
Action: Ensure that the LDAP host name specified is
valid.
Name: ivacl_s_invalid_init_ldap_host
Number: 0x1005b397 (268809111)
Severity: Error
Component: acl / ivacl_s_client
10
Error Message Reference
HPDAC0925E An invalid LDAP server SSL keyfile
password was specified.
Explanation: See message.
Action: Ensure that the specified password for the
LDAP server SSL keyfile is correct.
Name: ivacl_s_invalid_init_ldap_ssl_ keyfile_pwd
Number: 0x1005b39d (268809117)
Severity: Error
Component: acl / ivacl_s_client
HPDAC0926E One or more of the LDAP server
values was not specified.
Explanation: To configure an LDAP registry server
you must at least specify the server host name, the port
on which to connect to the server, the DN with which
to bind to the server and the password for that DN.
One of these values was not specified in the
configuration settings.
Action: Ensure that you have specified the LDAP
registry server name, request port, bind DN, and bind
DN password in the aznAPI client configuration
settings.
Number: 0x1005b3a2 (268809122)
Severity: Error
Component: acl / ivacl_s_client
HPDAC0931E Unable to configure LDAP replica
server.
Explanation: The replica is either misconfigured or
there are too many replicas configured.
Number: 0x1005b39e (268809118)
Action: Ensure that the replica LDAP server
configuration settings are valid and refer to an
operational replica of the master LDAP server. Also
ensure that you have not registered more LDAP
replicas than that allowed by the LDAP registry
implementation.
Severity: Error
Name: ivacl_s_init_ldap_replica_error
Component: acl / ivacl_s_client
Number: 0x1005b3a3 (268809123)
Name: ivacl_s_invalid_init_ldap_server_ config
Severity: Error
HPDAC0928E The attempt to initialize the LDAP
registry failed.
Component: acl / ivacl_s_client
Explanation: This failure can occur when the LDAP
registry server configuration settings are incorrect or
when the Tivoli Access Manager runtime is incorrectly
configured for a registry type other than LDAP.
HPDAC0932E An invalid LDAP bind user DN was
specified.
Action: Ensure that you have correctly configured the
Tivoli Access Manager Runtime package to use an
LDAP user registry. The current user registry setting
can be determined by looking at the ’user-reg-type’
entry in the [pdrte] stanza of the ’etc/pd.conf’ file in
the Tivoli Access Manager install directory. If the
runtime is configured incorrectly, you will need to
unconfigure all packages and reconfigure the machine
again. If the runtime has been correctly configured,
then ensure that the configuration parameters specified
for the LDAP registry server are correct.
Name: ivacl_s_init_ldap_unreachable
Number: 0x1005b3a0 (268809120)
Explanation: See message.
Action: Ensure that the LDAP bind user DN specified
is valid.
Name: ivacl_s_invalid_init_ldap_bind_dn
Number: 0x1005b3a4 (268809124)
Severity: Error
Component: acl / ivacl_s_client
HPDAC0933E The password for the LDAP bind user
was invalid.
Explanation: See message.
Severity: Error
Action: Ensure that the LDAP bind user password
specified is valid.
Component: acl / ivacl_s_client
Name: ivacl_s_invalid_init_ldap_bind_pwd
HPDAC0930E A memory allocation call failed.
Explanation: In most cases this error due to the
aznAPI application program running out of memory.
Action: Ensure that the application has been
configured with sufficient virtual memory for its
requirements. The Tivoli Access Manager Performance
Tuning Guide contains instructions on how to ensure
that the application is configured with the correct
amount of virtual memory. Stop and restart the process.
If the problem persists then contact your IBM service
representative.
Name: ivacl_s_out_of_memory
Number: 0x1005b3a5 (268809125)
Severity: Error
Component: acl / ivacl_s_client
HPDAC0934E An invalid configuration file path was
specified.
Explanation: See message.
Action: Ensure that the path to the configuration file
that was specified is valid.
Name: ivacl_s_invalid_init_cfg_file
Number: 0x1005b3a6 (268809126)
Chapter 1. Tivoli Access Manager Base Messages
11
Severity: Error
Component: acl / ivacl_s_client
text string consisting of one or more valid aznAPI
attribute names separated by spaces.
Name: ivacl_s_invalid_init_perminfo_ attrs
HPDAC0935E An error occurred loading the aznAPI
configuration file.
Explanation: See message.
Action: Review the aznAPI configuration file used to
initialize the application and ensure that it is a valid
stanza format file and that the entries conform to
stanza format syntax.
Name: ivacl_s_config_load_failed
Number: 0x1005b3a7 (268809127)
Severity: Error
Component: acl / ivacl_s_client
HPDAC0936E An error occurred loading the
configuration file specified as the
parameter to ’ldap-server-config’ in the
aznAPI config file.
Number: 0x1005b3ac (268809132)
Severity: Error
Component: acl / ivacl_s_client
HPDAC0941E Too many permission information
attributes were specified with the
azn_init_set_perminfo_attrs attribute.
Explanation: The maximum number of permission
info attributes that can be returned from an
azn_decision_access_allowed_ext() call is 32.
Action: Review the list of permission information
attributes that you have specified in the
azn_init_set_perminfo_attrs attribute and ensure that
the count of attributes is no greater than 32.
Name: ivacl_s_invalid_init_perminfo_ count
Number: 0x1005b3ad (268809133)
Explanation: See message.
Severity: Error
Action: Review the respective aznAPI configuration
file and ensure that it is a valid stanza format file and
that the entries conform to stanza format syntax.
Component: acl / ivacl_s_client
Name: ivacl_s_ldap_config_load_failed
Number: 0x1005b3a8 (268809128)
Severity: Error
Component: acl / ivacl_s_client
HPDAC0937E An invalid maximum search size was
specified.
Explanation: The specified maximum search size
could not be converted to an integer number or is zero.
Action: Ensure that the value specified for maximum
search size is a valid integer value in the range
specified in the LDAP registry server documentation
and is not zero.
Name: ivacl_s_invalid_init_ldap_max_ search_size
Number: 0x1005b3a9 (268809129)
Severity: Error
Component: acl / ivacl_s_client
HPDAC0940E An invalid attribute value was
specified for the
azn_init_set_perminfo_attrs attribute.
Explanation: See message.
Action: Ensure that the value specified for the
azn_init_set_perminfo_attrs initialization attribute is a
12
Error Message Reference
HPDAC0943E An invalid trace configuration
parameter was specified: ″%s″.
Explanation: Either the application configuration file
contains an invalid ’trace’ configuration item in the
[aznapi-configuration] stanza or the application is
passing an invalid value for the azn_init_trace
programmatic initialization attribute. The value
considered invalid is shown in the error message.
Action: Correct the value of the trace configuration
parameter in the configuration file or the application as
appropriate.
Name: ivacl_s_invalid_init_trace
Number: 0x1005b3af (268809135)
Severity: Error
Component: acl / ivacl_s_client
HPDAC0944E An invalid statistics configuration
parameter was specified: ″%s″.
Explanation: Either the application configuration file
contains an invalid ’stats’ configuration item in the
[aznapi-configuration] stanza or the application is
passing an invalid value for the azn_init_stats
azn_initialize parameter. The value considered invalid
is shown in the error message.
Action: Correct the value of the ’stats’ configuration
parameter in the configuration file or the application as
appropriate.
Name: ivacl_s_invalid_init_stats
Name: ivacl_s_invalid_init_ldap_search_ timeout
Number: 0x1005b3b0 (268809136)
Number: 0x1005b3b3 (268809139)
Severity: Error
Severity: Error
Component: acl / ivacl_s_client
Component: acl / ivacl_s_client
HPDAC0945E The value specified for the ’timeout’
parameter in the [ldap] stanza is invalid:
″%s″.
HPDAC0948E Validation of the rule text for the rule
object failed. Refer to the error log for
more information about the failure.
Explanation: Either the application configuration file
contains an invalid ’timeout’ configuration value in the
[ldap] stanza or the application is passing an invalid
value for the azn_init_ldap_timeout azn_initialize
parameter. The value considered invalid is shown in
the error message.
Explanation: The rule text of the rule policy is not
valid.
Action: Correct the value of the ’timeout’ parameter in
the [ldap] stanza. It must be a non-negative integer.
Number: 0x1005b3b4 (268809140)
Name: ivacl_s_invalid_init_ldap_timeout
Action: Review the rule text for the rule policy named
in the error log and correct any errors.
Name: ivacl_s_xsl_rule_validation_failed
Severity: Error
Component: acl / ivacl_s_authzn
Number: 0x1005b3b1 (268809137)
Severity: Error
Component: acl / ivacl_s_client
HPDAC0946E The value specified for the
’authn-timeout’ parameter in the [ldap]
stanza is invalid: ″%s″.
Explanation: Either the application configuration file
contains an invalid ’authn-timeout’ configuration value
in the [ldap] stanza or the application is passing an
invalid value for the azn_init_ldap_authn_timeout
azn_initialize parameter. The value considered invalid
is shown in the error message.
Action: Correct the value of the ’authn-timeout’
parameter in the [ldap] stanza. It must be a
non-negative integer.
Name: ivacl_s_invalid_init_ldap_authn_ timeout
Number: 0x1005b3b2 (268809138)
Severity: Error
Component: acl / ivacl_s_client
HPDAC0947E The value specified for the
’search-timeout’ parameter in the [ldap]
stanza is invalid: ″%s″.
Explanation: Either the application configuration file
contains an invalid ’search-timeout’ configuration item
in the [ldap] stanza or the application is passing an
invalid value for the azn_init_ldap_search_timeout
azn_initialize parameter. The value considered invalid
is shown in the error message.
Action: Correct the value of the ’search-timeout’
parameter in the [ldap] stanza. It must be a
non-negative integer.
HPDAC0949E Validation of the rule text for rule
object ″%s″ failed. Error code 0x%x was
returned along with error message ″%s″.
Explanation: The rule text of the rule policy is not
valid.
Action: Review the rule text for the rule policy named
in the error log and correct any errors.
Name: ivacl_s_xsl_rule_validation_ failed_detail
Number: 0x1005b3b5 (268809141)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC0950E An ADI container name was found in
multiple places in the input from the
application. Refer to the error log for
more information about the failure.
Explanation: The same piece of access decision
information cannot be provided to the rules evaluator
from two different sources as this indicates that one
piece of data may not be valid or is incorrectly named.
Container names must be unique across data sources.
Action: Review your system configuration to ensure
that only one of either the application context or user
credentials is the source for the piece of ADI named in
the error log.
Name: ivacl_s_duplicate_container_ names_found
Number: 0x1005b3b6 (268809142)
Severity: Error
Component: acl / ivacl_s_authzn
Chapter 1. Tivoli Access Manager Base Messages
13
HPDAC0951E The ADI container name ″%s″ was
found in multiple places in the input
from the application.
Explanation: The same piece of access decision
information cannot be provided to the rules evaluator
from two different sources as this indicates that one
piece of data may not be valid or is incorrectly named.
Container names must be unique across data sources.
Action: Review your system configuration to ensure
that only one of either the application context or user
credentials is the source for the piece of ADI named in
the error log.
Name: ivacl_s_duplicate_container_
names_found_detail
HPDAC0954E The rule object was not evaluated
because there was insufficient access
decision information provided in the
application context and credential
attributes.
Explanation: To evaluate a rule, the authorization
engine must have all of the ADI referenced in the rule
text available at evaluation time. If any items of data
are missing then the rule cannot be evaluated.
Action: Review the rule text for the rule policy object
named in the error log and ensure that all of the items
of data listed in the error message are provided to the
access decision call.
Name: ivacl_s_insufficient_input_ adi_provided
Number: 0x1005b3b7 (268809143)
Number: 0x1005b3ba (268809146)
Severity: Error
Severity: Error
Component: acl / ivacl_s_authzn
Component: acl / ivacl_s_authzn
HPDAC0952E The XSL processor failed to evaluate
the rule object. Refer to the error log for
more information about the failure.
HPDAC0955E Rule object ″%s″ was not evaluated
because there was insufficient access
decision information provided to the
access decision call. Missing ADI items
include: %s.
Explanation: The rule text of the rule policy named in
the error log is not valid and caused an error condition
in the XSL processor.
Action: Review the rule text for the rule policy object
named in the error log and correct any errors.
Name: ivacl_s_xsl_rule_processing_failed
Explanation: To evaluate a rule the authorization
engine must have all of the ADI referenced in the rule
text available at evaluation time. If any items of data
are missing then the rule cannot be evaluated.
Severity: Error
Action: Review the rule text for the rule policy object
named in the error log and ensure that all of the items
of data listed in the error message are provided to the
access decision call.
Component: acl / ivacl_s_authzn
Name: ivacl_s_insufficient_input_ adi_provided_detail
Number: 0x1005b3b8 (268809144)
HPDAC0953E The XSL processor failed to evaluate
the rule object ″%s″. Error code 0x%x
was returned along with error message
″%s″.
Explanation: The rule text of the rule policy named in
the error log is not valid and caused an error condition
in the XSL processor.
Action: Review the rule text for the rule policy object
named in the error log and correct any errors.
Name: ivacl_s_xsl_rule_processing_ failed_detail
Number: 0x1005b3b9 (268809145)
Severity: Error
Component: acl / ivacl_s_authzn
Number: 0x1005b3bb (268809147)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC0956E The rule text is invalid because the
template match statement does not
match one of the minimum required
paths of /XMLADI or XMLADI.
Explanation: Input data is supplied to the rules
evaluator within a top-level element XMLADI. To
match any data item within the XML document the
template match statement must match either the XPath
/XMLADI or XMLADI. Matching paths above this
point in the path is not valid.
Action: Review the rule text for the rule policy object
and change the template match statement to include
one of /XMLADI or XMLADI.
Name: ivacl_s_xsl_rule_illegal_template_ match
Number: 0x1005b3bc (268809148)
14
Error Message Reference
Severity: Error
Severity: Error
Component: acl / ivacl_s_authzn
Component: acl / ivacl_s_authzn
HPDAC0957E The rule ″%s″ is invalid because the
template match statement does not
match one of the minimum required
paths of /XMLADI or XMLADI.
HPDAC0960E The rule has a null entry in the
compiled rules cache.
Explanation: Input data is supplied to the rules
evaluator witin a top-level element XMLADI. To match
any data item within the XML document the template
match statement must match either the XPath
/XMLADI or XMLADI. Matching paths above this
point in the path is not valid.
Action: Review the rule text for the rule policy object
named in the error log and change the template match
statement to include one of /XMLADI or XMLADI.
Explanation: The validation of the rule text of the rule
policy named in the error log failed and the rule could
not be cached in the local client.
Action: Review the rule text for the rule policy and
correct any errors.
Name: ivacl_s_rule_null_in_rule_cache
Number: 0x1005b3c0 (268809152)
Severity: Error
Component: acl / ivacl_s_authzn
Name: ivacl_s_xsl_rule_illegal_template_ match_detail
Number: 0x1005b3bd (268809149)
Severity: Error
HPDAC0961E Rule %s has a null entry in the
compiled rules cache.
Component: acl / ivacl_s_authzn
Explanation: The validation of the rule text of the rule
policy named in the error log failed and the rule could
not be cached in the local client.
HPDAC0958E The rule was found to have no
identifiable ADI to use when evaluating
the rule.
Action: Review the rule text for the rule policy named
in the error log and correct any errors.
Explanation: The validation of the rule text of the rule
policy named in the error log failed because there was
no ADI identified in the rule text. ADI consists of the
variables used in a rule to make comparisons against. A
rule with no variables, for example a rule that is
comparing static data, is invalid.
Action: Review the rule text for the rule policy and
correct any errors.
Name: ivacl_s_rule_has_no_adi
Number: 0x1005b3be (268809150)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC0959E Rule %s was found to have no
identifiable ADI to use when evaluating
the rule.
Explanation: The validation of the rule text of the rule
policy named in the error log failed because there was
no ADI identified in the rule text. ADI consists of the
variables used in a rule to make comparisons against. A
rule with no variables, for example a rule that is
comparing static data, is invalid.
Action: Review the rule text for the rule policy named
in the error log and correct any errors.
Name: ivacl_s_rule_has_no_adi_detail
Number: 0x1005b3bf (268809151)
Name: ivacl_s_rule_null_in_rule_cache_ detail
Number: 0x1005b3c1 (268809153)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC0962E The XSL prolog entry specifies an XSL
output method other than ’text’, which
is an invalid processor setting for rules
evaluation.
Explanation: The output of any rule evaluation must
be plain text so setting any other output method in the
XSL prolog entry for the rules evaluator is invalid.
Action: Review the XSL prolog entry in the
application’s configuration file and ensure that the
output method is ’text’.
Name: ivacl_s_non_text_xsl_output_ illegal
Number: 0x1005b3c2 (268809154)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC0963E The XSL prolog asks the XSL
processor to generate an XML
declaration in the output from a rule
evaluation. This setting is invalid.
Explanation: The output of any rule evaluation must
be minimal plain text so including an XML declaration
Chapter 1. Tivoli Access Manager Base Messages
15
in the text output is invalid.
Severity: Error
Action: This is an invalid processor setting for rules
evaluation. Review the XSL prolog entry in the
application’s configuration file and ensure that the
’omit-xml-declaration’ setting in the output method is
’yes’.
Component: acl / ivacl_s_authzn
Name: ivacl_s_xsl_output_has_xml_decl
Number: 0x1005b3c3 (268809155)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC0964E The method of output encoding
specified for the XSL processor is
invalid for the purposes of rule
evaluation.
Explanation: The encoding for XSL output specified in
the XSL prolog configuration entry must be UTF-8.
Action: Review the XSL prolog entry in the
application’s configuration file and ensure that the
output encoding is UTF-8.
Name: ivacl_s_invalid_xsl_output_ encoding
Number: 0x1005b3c4 (268809156)
Severity: Error
HPDAC0967E An invalid XSL operation was
encountered while parsing the compiled
XSL rule.
Explanation: An internal XSL rule parsing error has
occurred.
Action: Review the rule text for the rule attached to
the target object and ensure that it is valid XSL and
conforms to Tivoli Access Manager requirements.
Name: ivacl_s_xsl_invalid_compiled_ opcode_found
Number: 0x1005b3c7 (268809159)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC0968E The rule does not return a valid result
tag to the authorization engine.
Explanation: A Tivoli Access Manager authorization
rule must return one of the values listed in the message
explanation to indicate the success, failure, or
indifference of the rule evaluation.
Component: acl / ivacl_s_authzn
Action: Review the rule text for the rule and ensure
that it will return one of the result tags !TRUE!,
!FALSE!, or !INDIFFERENT! in the XSL output
document to the authorization engine.
HPDAC0965E The parsing of the compiled XSL rule
returned an invalid element pointer.
Name: ivacl_s_xsl_rule_returns_no_ result_tag
Explanation: An internal XSL rule parsing error has
occurred.
Action: Review the rule text for the rule attached to
the target object and ensure that it is valid XSL and
conforms to Tivoli Access Manager requirements.
Name: ivacl_s_xsl_elem_parse_failure
Number: 0x1005b3c5 (268809157)
Number: 0x1005b3c8 (268809160)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC0969E Rule ″%s″ does not return a valid
result tag to the authorization engine.
Component: acl / ivacl_s_authzn
Explanation: A Tivoli Access Manager authorization
rule must return one of the values listed in the message
explanation to indicate the success, failure, or
indifference of the rule evaluation.
HPDAC0966E The parsing of the compiled XSL rule
returned an invalid template match
string pointer.
Action: Review the rule text for the rule named in the
error log and ensure that it will return one of the result
tags !TRUE!, !FALSE!, or !INDIFFERENT! in the XSL
output document to the authorization engine.
Severity: Error
Explanation: An internal XSL rule parsing error has
occurred.
Action: Review the rule text for the rule attached to
the target object and ensure that it is valid XSL and
conforms to Tivoli Access Manager ’template match’
statement requirements.
Name: ivacl_s_xsl_template_match_ parse_invalid
Number: 0x1005b3c6 (268809158)
16
Error Message Reference
Name: ivacl_s_xsl_rule_returns_no_ result_tag_detail
Number: 0x1005b3c9 (268809161)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC0970E The rule contains an absolute XPath
that doesn’t include the top-level
document element /XMLADI.
HPDAC0973E The XSL prolog contains a namespace
declaration that has no prefix to URI
assignment.
Explanation: Tivoli Access Manager authorization
rules are restricted to referencing ADI elements within
an XML document with the top-level element
<XMLADI>. Absolute XPaths that attempt to reference
other top-level document elements are invalid.
Explanation: The authorization engine failed to find
an ’=’ sign to denote assignment of a URI to a
namespace prefix in the XSL prolog statement.
Action: Review the rule text for the rule and ensure
that all absolute XPaths to rule ADI start from the
top-level document element /XMLADI.
Name: ivacl_s_invalid_absolute_xpath
Number: 0x1005b3ca (268809162)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC0971E The XSL prolog contains an XML
namespace declaration for the default
namespace. The default namespace is
reserved for use by Tivoli Access
Manager.
Explanation: The default XML/XSL namespace, which
has no prefix, is reserved for use by Tivoli Access
Manager.
Action: Review the XSL prolog statement and remove
any default namespace declaration.
Name: ivacl_s_namespace_decl_default_
namespace_reserved
Number: 0x1005b3cb (268809163)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC0972E The XSL prolog contains a namespace
declaration that has an invalid URI.
Explanation: The authorization engine failed to parse
a URI from the XSL prolog statement.
Action: Review the XSL prolog statement and ensure
that the URIs in the XML namespace declarations have
been correctly defined and delimited with quotation
marks.
Action: Review the XSL prolog statement and ensure
that a URI has been specified for each namespace prefix
declared.
Name: ivacl_s_namespace_decl_has_ no_equals
Number: 0x1005b3cd (268809165)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC0974E The XSL prolog contains a duplicate
namespace prefix or URI declaration.
Explanation: The authorization engine requires that
the mapping of namespace prefix to URI is unique so
that target ADI can be properly identified.
Action: Review the XSL prolog statement and ensure
that the mapping of namespace prefix to URI is unique.
Name: ivacl_s_namespace_decl_duplicate_
prefix_definition
Number: 0x1005b3ce (268809166)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC0975E The XSL prolog contains a namespace
declaration for the prefix ’xsl’. This
prefix is reserved for the XSLT language
namespace.
Explanation: The authorization engine requires that
the mapping of namespace prefix to URI is unique so
that target ADI can be properly identified.
Action: Review the XSL prolog statement and remove
any namespace declaration for the prefix ’xsl’ that is
not mapped to the XSLT standard URI.
Name: ivacl_s_namespace_decl_xsl_ prefix_reserved
Number: 0x1005b3cf (268809167)
Name: ivacl_s_namespace_decl_has_ invalid_uri
Severity: Error
Number: 0x1005b3cc (268809164)
Component: acl / ivacl_s_authzn
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC0976E An unexpected Xalan processor
exception was caught during rule
processing. Refer to the error log for
more information about the exception.
Explanation: Xalan returned an exception condition to
the authorization engine that was not handled and not
expected.
Chapter 1. Tivoli Access Manager Base Messages
17
Action: Refer to the error log to determine if an error
message accompanied the exception.
Name: ivacl_s_unexpected_xalan_exception
Number: 0x1005b3d0 (268809168)
Severity: Error
Component: acl / ivacl_s_general
HPDAC0977E An unexpected Xalan processor
exception was caught during rule
processing. Error message ″%s″ was
returned with the exception.
Explanation: Xalan returned an exception condition to
the authorization engine that was not handled and not
expected.
Action: Refer to the error log to determine if an error
message accompanied the exception.
Name: ivacl_s_unexpected_xalan_exception_ detail
Number: 0x1005b3d1 (268809169)
Severity: Error
Component: acl / ivacl_s_general
HPDAC0978E A predicate expression using the
/XMLADI top-level document element
cannot be used in an authorization rule.
Explanation: Tivoli Access Manager authorization
rules are restricted to referencing ADI elements within
an XML document with the top-level element
<XMLADI>. Predicate expressions that use /XMLADI
are invalid for use in authorization rules because the
target ADI of the predicate expression cannot be
determined with certainty prior to evaluation.
Action: Review the rule text for the rule and remove
the predicate expression that uses the top-level
document element /XMLADI.
Name: ivacl_s_invalid_xmladi_predicate
Number: 0x1005b3d2 (268809170)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC0979E The result string returned from the
rule evaluation is greater than the
maximum result buffer size of 1023
bytes.
Explanation: The buffer used to store the text output
of a rule evaluation is 1023 bytes in length. The result
text string returned by the rule must have a length less
than this in order to fit into the result buffer. If the
result string token is surrounded by a lot of white
space then this error might occur. To determine the
result string text that will be returned as output from
18
Error Message Reference
the rule evaluation, count the number of characters
between the last closing ’>’ character and the first
opening ’<’ character after that in the line containing
the result string token.
Action: Review the rule text for the rule and ensure
that the rule returns one of the required result string
tokens as outlined in the Tivoli Access Manager Tivoli
Access Manager Base Administrator’s Guide. Also
ensure that the white space surrounding the result
string token is kept to a minimum so that total count of
output characters is less than 1023.
Name: ivacl_s_rule_result_string_ too_large
Number: 0x1005b3d3 (268809171)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC0980E A value added to the azn_cred_groups
attribute is not a string value.
Explanation: The type of all values of the
azn_cred_groups attribute must be of type string. Other
attribute types are not permitted.
Action: Review the values of the azn_cred_groups
attribute returned in the entitlements attribute list and
ensure that each attribute value is a string.
Name: ivacl_s_cred_group_not_string
Number: 0x1005b3d4 (268809172)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC0981E The request to add group
memberships to the user credential from
an entitlement service was denied.
Explanation: To ensure that the resource manager
cannot modify the group memberships of a credential
without explicit approval the resource manager must
have loaded the credential group modification service
supplied with Tivoli Access Manager. If this service is
not loaded or is unavailable then the resource manager
cannot modify the group memberships of the
credentials with an entitlement service called by
azn_id_get_creds().
Action: If the resource manager is permitted to add
group memberships to the user credential built by
azn_id_get_creds() then the system administrator must
also configure the resource manager to load the
credential group modification service supplied with
Tivoli Access Manager.
Name: ivacl_s_cred_group_modification_ denied
Number: 0x1005b3d5 (268809173)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC0982E The code set parameter specified is
not one of the valid code set name
constants expected by the aznAPI
runtime.
Explanation: The aznAPI runtime requires that the
code set name parameter specified be one of the valid
code set name constants. The constants include
’azn_code_set_utf8’ and ’azn_code_set_local’.
Action: Review the specified parameter and ensure
that the value for the code set name is one of the string
constants ’azn_code_set_utf8’ or ’azn_code_set_local’.
HPDAC1053E Traverse permission was denied.
Request permitted by Warning Mode.
Explanation: See message.
Action: An authorization decision result. No action is
required.
Name: ivacl_s_cant_traverse_wm
Number: 0x1005b41d (268809245)
Severity: Error
Component: acl / ivacl_s_authzn
Name: ivacl_s_invalid_code_set
Number: 0x1005b3d6 (268809174)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC1050E Operation is not authorized.
Explanation: See message.
HPDAC1056E Delegate principal is unauthorized to
perform delegation.
Explanation: See message.
Action: An authorization decision result. No action is
required.
Name: ivacl_s_delegate_unauthorized
Number: 0x1005b420 (268809248)
Action: An authorization decision result. No action is
required.
Severity: Error
Name: ivacl_s_unauthorized
Component: acl / ivacl_s_authzn
Number: 0x1005b41a (268809242)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC1057E Delegate principal is unauthorized to
perform delegation. Request permitted
by Warning Mode.
Explanation: See message.
HPDAC1051E Operation is not authorized. Request
permitted by Warning Mode.
Action: An authorization decision result. No action is
required.
Explanation: See message.
Name: ivacl_s_delegate_unauthorized_wm
Action: An authorization decision result. No action is
required.
Number: 0x1005b421 (268809249)
Name: ivacl_s_unauthorized_wm
Severity: Error
Component: acl / ivacl_s_authzn
Number: 0x1005b41b (268809243)
Severity: Error
HPDAC1058E External authorization failed.
Component: acl / ivacl_s_authzn
Explanation: See message.
HPDAC1052E No traverse permission.
Action: An authorization decision result. No action is
required.
Explanation: See message.
Name: ivacl_s_extern_authzn_failed
Action: An authorization decision result. No action is
required.
Number: 0x1005b422 (268809250)
Name: ivacl_s_cant_traverse
Severity: Error
Component: acl / ivacl_s_authzn
Number: 0x1005b41c (268809244)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC1059E ACL evaluation algorithm failure
(0x%8.8lx).
Explanation: The ACL evaluation algorithm failed to
obtain the permission set from the effective ACL.
Chapter 1. Tivoli Access Manager Base Messages
19
Action: See the accompanying status code, which
gives more information about the failure.
Severity: Error
Component: acl / ivacl_s_authzn
Name: ivacl_s_acl_eval_algorithm
Number: 0x1005b423 (268809251)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC1060E Access to the protected object is not
allowed during this time of day.
HPDAC1066E Access to the protected object was
denied by EAS.
Explanation: See message.
Action: An authorization decision result. No action is
required.
Name: ivacl_s_eas_unauthorized
Explanation: See message.
Number: 0x1005b42a (268809258)
Action: An authorization decision result. No action is
required.
Severity: Error
Component: acl / ivacl_s_authzn
Name: ivacl_s_timeofday_unauthorized
Number: 0x1005b424 (268809252)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC1063E Authentication step up is required to
access the protected object.
Explanation: See message.
Action: An authorization decision result. No action is
required.
Name: ivacl_s_authn_stepup
HPDAC1067E Access to the protected object was
denied by EAS. Request permitted by
Warning Mode.
Explanation: See message.
Action: An authorization decision result. No action is
required.
Name: ivacl_s_eas_unauthorized_wm
Number: 0x1005b42b (268809259)
Severity: Error
Component: acl / ivacl_s_authzn
Number: 0x1005b427 (268809255)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC1064E Access to the protected object is not
allowed during this time of day.
Request permitted by Warning Mode.
HPDAC1068E Access to the protected object was
denied by EAS override.
Explanation: See message.
Action: An authorization decision result. No action is
required.
Name: ivacl_s_eas_override_with_unauthorized_
Explanation: See message.
Number: 0x1005b42c (268809260)
Action: An authorization decision result. No action is
required.
Severity: Error
Component: acl / ivacl_s_authzn
Name: ivacl_s_timeofday_unauthorized_wm
Number: 0x1005b428 (268809256)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC1065E Access to the protected object was
permitted by EAS override.
Explanation: See message.
Action: An authorization decision result. No action is
required.
Name: ivacl_s_eas_override_with_authorized_
Number: 0x1005b429 (268809257)
20
Error Message Reference
HPDAC1069E Access to the protected object was
denied by EAS override. Request
permitted by Warning Mode.
Explanation: See message.
Action: An authorization decision result. No action is
required.
Name: ivacl_s_eas_override_with_unauthorized_ wm
Number: 0x1005b42d (268809261)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC1070E The authorization rule policy attached
to the protected object denied access to
the object.
HPDAC1074W The protected object’s effective
authorization rule policy has not been
enforced.
Explanation: See message.
Explanation: Authorization rule policies are not
enforced with this version of the product.
Action: An authorization decision result. No action is
required.
Number: 0x1005b42e (268809262)
Action: No action is required. However if
authorization rules are mandatory to enforcing your
security policy, you should use a version of the product
that supports this feature.
Severity: Error
Name: ivacl_s_authzn_rule_notenforced
Component: acl / ivacl_s_authzn
Number: 0x1005b432 (268809266)
Name: ivacl_s_authzn_rule_unauthorized
Severity: Warning
HPDAC1071E The authorization rule policy attached
to the protected object denied access to
the object. Request permitted by
Warning Mode.
Explanation: See message.
Action: An authorization decision result. No action is
required.
Component: acl / ivacl_s_authzn
HPDAC1350E aznAPI -- Internal error: see minor
code.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: ivacl_s_authzn_rule_unauthorized_ wm
Name: ivacl_s_azn_s_u_internal_error
Number: 0x1005b42f (268809263)
Number: 0x1005b546 (268809542)
Severity: Error
Severity: Error
Component: acl / ivacl_s_authzn
Component: acl / ivacl_s_aznapi
HPDAC1072E The step-up authorization policy on
the protected object has denied access.
HPDAC1351E aznAPI -- DCE authentication failed.
Name: ivacl_s_stepup_forbidden
Explanation: The aznAPI runtime was unable to
authenticate to the DCE authentication service. This
message is obsolete as DCE is no longer supported by
Tivoli Access Manager. The message code must remain
to ensure synchronicity between the aznAPI major
utility function status codes and the message catalogs.
Number: 0x1005b430 (268809264)
Action: No action is required.
Severity: Error
Name: ivacl_s_azn_s_u_dce_authen_failed
Component: acl / ivacl_s_authzn
Number: 0x1005b547 (268809543)
Explanation: See message.
Action: An authorization decision result. No action is
required.
Severity: Error
HPDAC1073E The step-up authorization policy on
the protected object has denied access.
Request permitted by Warning Mode.
Explanation: See message.
Action: An authorization decision result. No action is
required.
Component: acl / ivacl_s_aznapi
HPDAC1352E aznAPI -- LDAP authentication failed.
Explanation: The aznAPI runtime was unable to
authenticate to the LDAP user registry.
Number: 0x1005b431 (268809265)
Action: Ensure that the LDAP server is configured
correctly, that it is operational and that the
authentication parameters supplied are valid.
Severity: Error
Name: ivacl_s_azn_s_u_ldap_authen_failed
Component: acl / ivacl_s_authzn
Number: 0x1005b548 (268809544)
Name: ivacl_s_stepup_forbidden_wm
Severity: Error
Component: acl / ivacl_s_aznapi
Chapter 1. Tivoli Access Manager Base Messages
21
HPDAC1353E aznAPI -- Already authenticated (API
caller may already be logged in).
Explanation: The aznAPI client runtime has attempted
to authenticate the server principal again.
Action: If you are calling azn_initialize() twice within
the same aznAPI application ensure that the second call
is preceded by a call to azn_shutdown().
Name: ivacl_s_azn_s_u_already_authenticated_
Number: 0x1005b549 (268809545)
Name: ivacl_s_azn_s_u_invalid_parameter
Number: 0x1005b54d (268809549)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1358E aznAPI -- Error from pthread call.
Explanation: A thread-related error condition was
returned.
HPDAC1354E aznAPI -- User’s password has
expired.
Action: Ensure that the applications have enough
system resources and worker threads to perform their
tasks. The Tivoli Access Manager Performance Tuning
Guide contains instructions on how to ensure that the
application is configured with the correct amount of
system resources and worker threads. If the problem
persists then contact your IBM service representative.
Explanation: See message.
Name: ivacl_s_azn_s_u_pthread_error
Action: The user must change the password.
Number: 0x1005b54e (268809550)
Name: ivacl_s_azn_s_u_password_expired
Severity: Error
Number: 0x1005b54a (268809546)
Component: acl / ivacl_s_aznapi
Severity: Error
Component: acl / ivacl_s_aznapi
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1359E aznAPI -- Invalid Principal Name.
Explanation: See message.
HPDAC1355E aznAPI -- The user information is
invalid.
Action: Specify the name of an existing user in the
user registry.
Explanation: See message.
Name: ivacl_s_azn_s_u_invalid_princ_name
Action: Ensure that the user specified exists in the
user registry and is a valid user.
Number: 0x1005b54f (268809551)
Name: ivacl_s_azn_s_u_invalid_user
Severity: Error
Component: acl / ivacl_s_aznapi
Number: 0x1005b54b (268809547)
Severity: Error
HPDAC1360E aznAPI -- Invalid Password.
Component: acl / ivacl_s_aznapi
Explanation: See message.
HPDAC1356E aznAPI -- The user registry is offline.
Action: The password supplied must match the
password in the user registry.
Explanation: See message.
Name: ivacl_s_azn_s_u_invalid_password
Action: Ensure that the user registry is operational.
Number: 0x1005b550 (268809552)
Name: ivacl_s_azn_s_u_user_registry_ unavail
Severity: Error
Number: 0x1005b54c (268809548)
Component: acl / ivacl_s_aznapi
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1357E aznAPI -- Invalid Calling Parameters.
Explanation: The aznAPI function was called with an
invalid parameter.
Action: Ensure that the respective parameters are
valid.
22
Error Message Reference
HPDAC1361E aznAPI -- Invalid Mechanism ID
Reference.
Explanation: See message.
Action: Ensure that the pointer reference specified
references a valid mechanism ID structure.
Name: ivacl_s_azn_s_u_invalid_mech_ id_ref
Number: 0x1005b551 (268809553)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1362E aznAPI -- Invalid keyfile path.
Explanation: See message.
Action: Ensure that the keyfile path is valid.
Name: ivacl_s_azn_s_u_invalid_keytab_ path
Number: 0x1005b552 (268809554)
Severity: Error
Component: acl / ivacl_s_aznapi
aznAPI --
is error code is reserved for future use.
Explanation: See message.
Action: No action is required.
Name: ivacl_s_azn_s_u_unused_010d
HPDAC1366E aznAPI -- The user account has been
locked out.
Explanation: The Tivoli Access Manager network
administrator has set a lock out time interval for this
account and it has expired causing logins to be
disabled for this account.
Action: Contact your Tivoli Access Manager network
administrator to unlock and enable login to the
account.
Name: ivacl_s_azn_s_u_account_lockedout
Number: 0x1005b556 (268809558)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1367E aznAPI -- New password is too short.
Explanation: See message.
Severity: Error
Action: Review the password resitrictions that apply
to your account and specify a password that meets the
minimum length requirements.
Component: acl / ivacl_s_aznapi
Name: ivacl_s_azn_s_u_password_too_short
Number: 0x1005b553 (268809555)
Number: 0x1005b557 (268809559)
HPDAC1364E aznAPI -- Account Login Disabled.
Severity: Error
Explanation: The account is disabled in the user
registry. Logins will not succeed until the account is
enabled.
Component: acl / ivacl_s_aznapi
Action: Contact your Tivoli Access Manager network
administrator to enable the account.
Name: ivacl_s_azn_s_u_account_disabled
Number: 0x1005b554 (268809556)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1368E aznAPI -- New password has illegal
spaces.
Explanation: The password must meet the specified
requirements for your account. Spaces within the
password are not permitted.
Action: Specify a password that doesn’t contain
spaces.
Name: ivacl_s_azn_s_u_password_has_ spaces
HPDAC1365E aznAPI -- Time of Day Access Denied.
Number: 0x1005b558 (268809560)
Explanation: See message.
Severity: Error
Action: The caller must perform the desired operation
within the time of day constraints set for the protected
object. Contact your Tivoli Access Manager network
administrator for details on the time of day access
restrictions that apply to the resource.
Component: acl / ivacl_s_aznapi
Name: ivacl_s_azn_s_u_tod_access_denied
Number: 0x1005b555 (268809557)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1369E aznAPI -- New password has too
many repeated characters.
Explanation: The password must meet the specified
requirements for your account. There is a maximum
limit on the number of times a character can be
repeated within the password.
Action: Review the password restrictions for your
account and specify a password that adheres to the
limitations on repeated characters.
Name: ivacl_s_azn_s_u_password_too_
many_repeated
Chapter 1. Tivoli Access Manager Base Messages
23
Number: 0x1005b559 (268809561)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1370E aznAPI -- New password has too few
alphabetical characters.
Explanation: The password must meet the specified
requirements for your account. There is a minimum
limit on the number of alphabetical characters within
the password.
Action: Review the password restrictions for your
account and specify a password that contains the
minimum number of alphabetical characters.
Name: ivacl_s_azn_s_u_password_too_ few_alpha
Number: 0x1005b55a (268809562)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1371E aznAPI -- New password has too few
non-alphabetical characters.
Explanation: The password must meet the specified
requirements for your account. There is a minimum
limit on the number of non-alphabetical characters
within the password.
Action: Review the password restrictions for your
account and specify a password that contains the
minimum number of non-alphabetical characters.
Action: Ensure that the user registry is configured
correctly, that it is operational and that the
authentication parameters supplied are valid.
Name: ivacl_s_azn_s_u_uraf_authen_failed
Number: 0x1005b55d (268809565)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1374W aznAPI -- This account has been
disabled due to too many failed login
attempts.
Explanation: See message.
Action: Contact your Tivoli Access Manager network
administrator to revalidate the account.
Name: ivacl_s_azn_s_u_password_acct_ disabled
Number: 0x1005b55e (268809566)
Severity: Warning
Component: acl / ivacl_s_aznapi
HPDAC1375E aznAPI -- User’s account has expired
Explanation: This user account’s expiration date has
passed and it can no longer be used.
Action: Contact your Tivoli Access Manager network
administrator to revalidate the account.
Name: ivacl_s_azn_s_u_account_expired
Name: ivacl_s_azn_s_u_password_too_ few_non_alpha
Number: 0x1005b55f (268809567)
Number: 0x1005b55b (268809563)
Severity: Error
Severity: Error
Component: acl / ivacl_s_aznapi
Component: acl / ivacl_s_aznapi
HPDAC1372E aznAPI -- Caller does not have the
rights to perform requested operation.
HPDAC1376E aznAPI -- User registry authentication
failed, and user account has been locked
out due to too many failed login
attempts.
Explanation: See message.
Explanation: See message.
Action: The caller must gain the appropriate
privileges before the required operation will be
permitted.
Action: Check your password and wait until
disable-time-interval has elapsed, or contact your Tivoli
Access Manager administrator to unlock and enable
login to the account.
Name: ivacl_s_azn_s_u_insufficient_ access
Number: 0x1005b55c (268809564)
Severity: Error
Component: acl / ivacl_s_aznapi
Name: ivacl_s_azn_s_u_authen_failed_ acct_lockedout
Number: 0x1005b560 (268809568)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1373E aznAPI -- User registry authenticate
failed.
Explanation: The aznAPI runtime was unable to
authenticate to the user registry.
24
Error Message Reference
HPDAC1377E aznAPI -- User registry authentication
failed, and user account has been
disabled due to too many failed login
attempts.
Explanation: See message.
Action: Check your password and contact your Tivoli
Access Manager administrator to enable this account.
HPDAC1503E aznAPI -- Invalid Credentials Handle.
Explanation: See message.
Action: Ensure that the credentials handle input
parameters passed to the aznAPI interface are valid.
Name: ivacl_s_azn_s_invalid_creds_hdl
Number: 0x1005b5df (268809695)
Name: ivacl_s_azn_s_u_authen_failed_ acct_disabled
Severity: Error
Number: 0x1005b561 (268809569)
Component: acl / ivacl_s_aznapi
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1500I aznAPI -- Successful.
Explanation: The aznAPI was completed with no
errors.
Action: No action is required.
Name: ivacl_s_azn_s_complete
Number: 0x1005b5dc (268809692)
Severity: Notice
Component: acl / ivacl_s_aznapi
HPDAC1501E aznAPI -- Failure.
Explanation: The aznAPI failed due to an error.
Action: Review the minor error status and application
logs for more details about the failure.
Name: ivacl_s_azn_s_failure
Number: 0x1005b5dd (268809693)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1502E aznAPI -- Authorization Failure.
Explanation: The aznAPI failed because the aznAPI
application server principal was not authorized to
perform a paticular task.
Action: Review the minor error status and application
logs for more details about the failure.
Name: ivacl_s_azn_s_authorization_ failure
Number: 0x1005b5de (268809694)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1504E aznAPI -- Invalid New Credentials
Handle.
Explanation: See message.
Action: Ensure that the credentials handle output
parameters passed to the aznAPI interface are valid.
Name: ivacl_s_azn_s_invalid_new_creds_ hdl
Number: 0x1005b5e0 (268809696)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1505E aznAPI -- Invalid Entitlements
Service.
Explanation: An entitlement service with the specified
service ID was not found in the list of services
registered with the aznAPI service dispatcher.
Action: Ensure that the specified entitlement service
ID refers to a valid entitlement service that has been
loaded into the current aznAPI application.
Name: ivacl_s_azn_s_invalid_entitlements_ svc
Number: 0x1005b5e1 (268809697)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1506E aznAPI -- Invalid Combined
Credentials Handle.
Explanation: See message.
Action: Ensure that the combined credentials handle
output parameter passed to the aznAPI interface is
valid.
Name: ivacl_s_azn_s_invalid_comb_ creds_hdl
Number: 0x1005b5e2 (268809698)
Severity: Error
Component: acl / ivacl_s_aznapi
Chapter 1. Tivoli Access Manager Base Messages
25
HPDAC1507E aznAPI -- Invalid Mechanism Info.
Explanation: See message.
Action: Ensure that the mechanism info input
parameter passed to the aznAPI interface is valid.
Name: ivacl_s_azn_s_invalid_mechanism_ info
Number: 0x1005b5e3 (268809699)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1508E aznAPI -- Invalid Mechanism.
Explanation: The mechanism ID specified does not
match a mechanism supported by the Tivoli Access
Manager aznAPI runtime.
Action: Ensure that the specified mechanism ID
matches one of the IDs supported by Tivoli Access
Manager.
Name: ivacl_s_azn_s_invalid_mechanism
Number: 0x1005b5e4 (268809700)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1511E aznAPI -- Invalid Added Credentials
Handle.
Explanation: See message.
Action: Ensure that the ’creds to add’ credentials
handle output parameter passed to the aznAPI
interface is valid.
Name: ivacl_s_azn_s_invalid_added_ creds_hdl
Number: 0x1005b5e7 (268809703)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1512E aznAPI -- Invalid Protected Resource.
Explanation: The specified protected resource is
invalid.
Action: Ensure that the protected resource is valid and
the resource name meets the criteria set by Tivoli
Access Manager.
Name: ivacl_s_azn_s_invalid_protected_ resource
Number: 0x1005b5e8 (268809704)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1509E aznAPI -- Invalid String Value.
Explanation: A string value passed to the aznAPI
interface is invalid.
HPDAC1513E aznAPI -- Invalid Operation.
Explanation: The operation string specified is invalid.
Action: Ensure that all strings passed to the interface
are not NULL.
Action: Ensure that the operation string supplied
meets the criteria set by Tivoli Access Manager.
Name: ivacl_s_azn_s_invalid_string_value
Name: ivacl_s_azn_s_invalid_operation
Number: 0x1005b5e5 (268809701)
Number: 0x1005b5e9 (268809705)
Severity: Error
Severity: Error
Component: acl / ivacl_s_aznapi
Component: acl / ivacl_s_aznapi
HPDAC1510E aznAPI -- Unknown Label.
HPDAC1514E aznAPI -- Invalid PAC.
Explanation: The labelling authorization policy model
is not implemented in the Tivoli Access Manager
authorization model.
Explanation: The supplied PAC is invalid.
Action: No action is required.
Name: ivacl_s_azn_s_unknown_label
Number: 0x1005b5e6 (268809702)
Severity: Error
Action: Ensure that the PAC parameter meets the
criteria set by Tivoli Access Manager.
Name: ivacl_s_azn_s_invalid_pac
Number: 0x1005b5ea (268809706)
Severity: Error
Component: acl / ivacl_s_aznapi
Component: acl / ivacl_s_aznapi
HPDAC1515E aznAPI -- Invalid PAC Service.
Explanation: A PAC service with the specified service
ID was not found in the list of services registered with
the aznAPI service dispatcher.
26
Error Message Reference
Action: Ensure that the specified PAC service ID refers
to a valid PAC service that has been loaded into the
current aznAPI application.
Name: ivacl_s_azn_s_invalid_pac_svc
Number: 0x1005b5eb (268809707)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1519E aznAPI -- Unimplemented Function.
Explanation: This function is not implemented in the
Tivoli Access Manager authorization model.
Action: No action is required.
Name: ivacl_s_azn_s_unimplemented_ function
Number: 0x1005b5ef (268809711)
Severity: Error
HPDAC1516E aznAPI -- Invalid Permission
Information Reference.
Component: acl / ivacl_s_aznapi
Explanation: See message.
HPDAC1520E aznAPI -- Invalid Attribute List
Handle.
Action: Ensure that the permission info credentials
handle output parameter passed to the aznAPI
interface is valid.
Explanation: See message.
Name: ivacl_s_azn_s_invalid_perminfo_ref
Action: Ensure that the attribute list handle parameter
is valid.
Number: 0x1005b5ec (268809708)
Name: ivacl_s_azn_s_invalid_attrlist_hdl
Severity: Error
Number: 0x1005b5f0 (268809712)
Component: acl / ivacl_s_aznapi
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1517E aznAPI -- Invalid Credentials
Modification Function.
Explanation: A credentials modification service with
the specified service ID was not found in the list of
services registered with the aznAPI service dispatcher.
Action: Ensure that the specified credentials
modification service ID refers to a valid credentials
modification service that has been loaded into the
current aznAPI application.
HPDAC1521E aznAPI -- Invalid Attribute Name.
Explanation: An attribute name passed as an input
parameter is NULL or does not exist in the target
attribute list.
Action: Ensure that the attribute name supplied is
non-NULL and exists in the target attribute list.
Name: ivacl_s_azn_s_invalid_attr_name
Name: ivacl_s_azn_s_invalid_mod_function
Number: 0x1005b5f1 (268809713)
Number: 0x1005b5ed (268809709)
Severity: Error
Severity: Error
Component: acl / ivacl_s_aznapi
Component: acl / ivacl_s_aznapi
HPDAC1522E aznAPI -- Invalid Buffer.
HPDAC1518E aznAPI -- Invalid Subject Index.
Explanation: The buffer parameter passed in is NULL.
Explanation: The specified index is out of range with
respect to the number of subjects in the target
credential.
Action: Ensure that the buffer parameter is valid.
Action: Ensure that the index specified is within range
for the target credential.
Number: 0x1005b5f2 (268809714)
Name: ivacl_s_azn_s_invalid_subject_ index
Component: acl / ivacl_s_aznapi
Name: ivacl_s_azn_s_invalid_buffer
Severity: Error
Number: 0x1005b5ee (268809710)
Severity: Error
HPDAC1523E aznAPI -- Invalid Buffer Reference.
Component: acl / ivacl_s_aznapi
Explanation: The buffer pointer parameter passed in is
NULL.
Action: Ensure that the buffer pointer parameter is
valid.
Name: ivacl_s_azn_s_invalid_buffer_ref
Chapter 1. Tivoli Access Manager Base Messages
27
Number: 0x1005b5f3 (268809715)
Severity: Error
HPDAC1528E aznAPI -- Invalid Permission
Reference.
Component: acl / ivacl_s_aznapi
Explanation: The permission code pointer parameter
passed in is NULL.
HPDAC1524E aznAPI -- Invalid String Reference.
Action: Ensure that the permission code pointer
parameter is valid.
Explanation: The string pointer parameter passed in is
NULL.
Action: Ensure that the string pointer parameter is
valid.
Name: ivacl_s_azn_s_invalid_string_ref
Name: ivacl_s_azn_s_invalid_permission_ ref
Number: 0x1005b5f8 (268809720)
Severity: Error
Component: acl / ivacl_s_aznapi
Number: 0x1005b5f4 (268809716)
Severity: Error
HPDAC1529E aznAPI -- Invalid Domain Specified.
Component: acl / ivacl_s_aznapi
Explanation: The domain specified is not valid.
Action: Specify a valid Tivoli Access Manager domain.
HPDAC1525E aznAPI -- Attribute Value is not of
type string.
Explanation: The function interface requires a string
typed attribute value.
Name: ivacl_s_azn_s_invalid_authority
Number: 0x1005b5f9 (268809721)
Severity: Error
Action: Ensure that the attribute value is of type
string.
Component: acl / ivacl_s_aznapi
Name: ivacl_s_azn_s_attr_value_not_ string_type
HPDAC1530E aznAPI -- Invalid Application Context
Handle.
Number: 0x1005b5f5 (268809717)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1526E aznAPI -- Attribute’s index value is
invalid.
Explanation: See message.
Action: Ensure that the application context attribute
list handle parameter is valid.
Name: ivacl_s_azn_s_invalid_app_context_ hdl
Number: 0x1005b5fa (268809722)
Explanation: The attribute value index is out of range.
Severity: Error
Action: Specify an attribute value index within the
range of available values for the attribute.
Component: acl / ivacl_s_aznapi
Name: ivacl_s_azn_s_attr_invalid_index
HPDAC1531E aznAPI -- Invalid Entitlements
Handle.
Number: 0x1005b5f6 (268809718)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1527E aznAPI -- Invalid Integer Reference.
Explanation: The integer pointer parameter passed in
is NULL.
Explanation: See message.
Action: Ensure that the entitlements attribute list
handle parameter is valid.
Name: ivacl_s_azn_s_invalid_entitlements_ hdl
Number: 0x1005b5fb (268809723)
Severity: Error
Action: Ensure that the integer pointer parameter is
valid.
Component: acl / ivacl_s_aznapi
Name: ivacl_s_azn_s_invalid_integer_ref
HPDAC1532E aznAPI -- Invalid Labeling Scheme.
Number: 0x1005b5f7 (268809719)
Explanation: The labelling authorization policy model
is not implemented in the Tivoli Access Manager
authorization model.
Severity: Error
Component: acl / ivacl_s_aznapi
28
Error Message Reference
Action: No action is required.
Name: ivacl_s_azn_s_invalid_labeling_ scheme
Number: 0x1005b5fc (268809724)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1533E aznAPI -- Invalid Init Data Handle.
Explanation: See message.
Action: Ensure that the initialization data attribute list
handle parameter is valid.
HPDAC1537E aznAPI -- API is Already Initialized.
Explanation: azn_initialize() has been called when the
authorization runtime has already been initialized. To
reinitialize the authorization runtime the application
must call azn_shutdown() before calling azn_initialize()
again.
Action: Ensure that the application does not attempt
to reinitialize the authorization runtime without first
calling azn_shutdown().
Name: ivacl_s_azn_s_api_already_initialized_
Name: ivacl_s_azn_s_invalid_init_ data_hdl
Number: 0x1005b601 (268809729)
Number: 0x1005b5fd (268809725)
Severity: Error
Severity: Error
Component: acl / ivacl_s_aznapi
Component: acl / ivacl_s_aznapi
HPDAC1534E aznAPI -- Invalid Init Info Handle.
Explanation: See message.
HPDAC1538E aznAPI -- Error in plugin service
definition.
Explanation: See message.
Action: Ensure that the initialization information
attribute list handle reference is not NULL.
Action: Ensure that the service definition meets the
criteria defined in the Authorization C API Developer’s
Reference.
Name: ivacl_s_azn_s_invalid_init_ info_hdl
Name: ivacl_s_azn_s_svc_definition_error
Number: 0x1005b5fe (268809726)
Number: 0x1005b602 (268809730)
Severity: Error
Severity: Error
Component: acl / ivacl_s_aznapi
Component: acl / ivacl_s_aznapi
HPDAC1535E aznAPI -- Attribute’s value is not of
type buffer.
HPDAC1539E aznAPI -- Plugin service not found.
Explanation: The function interface requires a buffer
typed attribute value.
Explanation: The service ID specified was not found
by the service dispatcher.
Action: Ensure that the attribute value is of type
buffer.
Action: Ensure that the service ID specified refers to a
valid service that has been loaded by the current
aznAPI application.
Name: ivacl_s_azn_s_attr_value_not_ buffer_type
Name: ivacl_s_azn_s_svc_service_not_ found
Number: 0x1005b5ff (268809727)
Number: 0x1005b603 (268809731)
Severity: Error
Severity: Error
Component: acl / ivacl_s_aznapi
Component: acl / ivacl_s_aznapi
HPDAC1536E aznAPI -- API is Uninitialized.
HPDAC1540E aznAPI -- Error while initializing
plugin service.
Explanation: An aznAPI interface was called before
azn_initialize() was called. Only aznAPI attribute list
interfaces can be called prior to azn_initialize().
Explanation: See message.
Severity: Error
Action: Refer to the application error logs and to the
minor status code returned from azn_initialize() for
more information about the reason for the service
failure. Some services might also return attributes in
the intialization information attribute list returned from
azn_initialize(). The attributes can contain further
information about the failure.
Component: acl / ivacl_s_aznapi
Name: ivacl_s_azn_s_svc_init_failed
Action: Ensure that the application calls only aznAPI
attribute list interfaces before calling azn_initialize().
Name: ivacl_s_azn_s_api_uninitialized
Number: 0x1005b600 (268809728)
Chapter 1. Tivoli Access Manager Base Messages
29
Number: 0x1005b604 (268809732)
Name: ivacl_s_azn_s_svc_dll_load_failed
Severity: Error
Number: 0x1005b607 (268809735)
Component: acl / ivacl_s_aznapi
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1541E aznAPI -- Error while shutting down
plugin service.
Explanation: The plugin returned an error while
shutting down.
HPDAC1544E aznAPI -- azn_svc_initialize() function
not found in the shared library of the
plug-in service.
Action: Refer to the application error logs and to the
minor status code returned from azn_shutdown() for
more information about the the service failure. Some
services might also return attributes in the intialization
information attribute list returned from
azn_shutdown(). The attributes can contain further
information about the reason the service shutdown
failed.
Explanation: The shared library of the aznAPI service
does not export an azn_svc_initialize() interface.
Name: ivacl_s_azn_s_svc_shutdown_failed
Number: 0x1005b608 (268809736)
Number: 0x1005b605 (268809733)
Severity: Error
Severity: Error
Component: acl / ivacl_s_aznapi
Action: Review the service source code and build
process to ensure that the shared library of the plug-in
service exports an azn_svc_initialize() interface to
applications.
Name: ivacl_s_azn_s_svc_initialize_ not_found
Component: acl / ivacl_s_aznapi
HPDAC1542E aznAPI -- Error while authorizing
plugin service.
Explanation: The plugin was not authorized to
perform a task. This might also be due to insufficient
privilege of the application server principal. It might
also be due to incorrect service configuration.
Action: Ensure that the aznAPI application server
principal has the appropriate permissions to enable the
aznAPI service to perform the required task. This error
might also occur if the parameters supplied to the
service plugin were not sufficient and should be
reviewed.
Name: ivacl_s_azn_s_svc_authorization_ failed
HPDAC1545E aznAPI -- azn_svc_shutdown()
function not found in the shared library
of the plug-in service.
Explanation: The shared library of the aznAPI service
does not export an azn_svc_shutdown() interface.
Action: Review the service source code and build
process to ensure that the shared library of the plug-in
service exports an azn_svc_shutdown() interface to
applications.
Name: ivacl_s_azn_s_svc_shutdown_ not_found
Number: 0x1005b609 (268809737)
Severity: Error
Component: acl / ivacl_s_aznapi
Number: 0x1005b606 (268809734)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1543E aznAPI -- Error while loading plugin
service’s shared library.
Explanation: The service dispatcher encountered an
error while loading the aznAPI service plugin shared
library.
Action: Refer to the application error logs and to the
minor status code returned from azn_initialize() for
more information about the failure. The service
dispatcher will also return an attribute in the
intialization information attribute list returned from
azn_initialize() if the information is available. The
attribute will contain further information about the
failure to load.
30
Error Message Reference
HPDAC1546E aznAPI -azn_svc_entitlements_get_entitlements()
function not found in the shared library
of the plug-in service.
Explanation: The aznAPI service shared library does
not export an azn_svc_entitlement_get_entitlements()
interface.
Action: Review the service source code and build
process to ensure that the shared library of the plug-in
service exports an
azn_svc_entitlement_get_entitlements() interface to
applications.
Name: ivacl_s_azn_s_svc_ent_func_ not_found
Number: 0x1005b60a (268809738)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1547E aznAPI -- PAC function not found in
the shared library of the plug-in service.
Explanation: The aznAPI service shared library does
not export both an azn_svc_creds_get_pac() and an
azn_svc_pac_get_creds() interface.
Action: Review the service source code and build
process to ensure that the shared library of the plug-in
service exports both the azn_svc_creds_get_pac() and
the azn_svc_pac_get_creds() interface to applications.
Name: ivacl_s_azn_s_svc_pac_func_ not_found
Number: 0x1005b60b (268809739)
HPDAC1550E aznAPI -- Another plugin has already
been registered with the same service
ID.
Explanation: See message.
Action: Ensure that you have a unique service ID for
the azn service loaded by the aznAPI application.
Name: ivacl_s_azn_s_svc_service_is_ registered
Number: 0x1005b60e (268809742)
Severity: Error
Component: acl / ivacl_s_aznapi
Severity: Error
HPDAC1551E aznAPI -- Failure in the aznAPI
Service Dispatcher.
Component: acl / ivacl_s_aznapi
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
HPDAC1548E aznAPI -- EAS function not found in
the shared library of the plug-in service.
Explanation: The aznAPI service shared library does
not export an azn_svc_decision_access_allowed_ext()
interface.
Action: Review the service source code and build
process to ensure that the shared library of the plug-in
service exports an
azn_svc_decision_access_allowed_ext() interface to
applications.
Name: ivacl_s_azn_s_svc_eas_func_ not_found
Number: 0x1005b60c (268809740)
Severity: Error
Component: acl / ivacl_s_aznapi
Name: ivacl_s_azn_s_svc_dispatcher_ failure
Number: 0x1005b60f (268809743)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1552E aznAPI -- Message for the minor code
is not found.
Explanation: A message string for this minor code
was not found in the message catalogs.
Action: Contact your IBM service representative for
more information about this message code.
Name: ivacl_s_azn_s_minor_code_message_ not_found
Number: 0x1005b610 (268809744)
HPDAC1549E aznAPI -- Credentials modification
function not found in the shared library
of the plug-in service.
Severity: Error
Explanation: The aznAPI service shared library does
not export an azn_svc_creds_modify() interface.
HPDAC1553E aznAPI -- Invalid EAS ACL Action
Trigger.
Action: Review the service source code and build
process to ensure that the shared library of the plug-in
service exports an azn_svc_creds_modify() interface to
applications.
Explanation: The ACL actions/operations trigger
specified was not valid.
Component: acl / ivacl_s_aznapi
Name: ivacl_s_azn_s_svc_cred_mod_ func_not_found
Action: Ensure that the trigger conforms to the criteria
outlined in the Authorization C API Developer’s
Reference.
Number: 0x1005b60d (268809741)
Name: ivacl_s_azn_s_invalid_eas_acl_ trigger
Severity: Error
Number: 0x1005b611 (268809745)
Component: acl / ivacl_s_aznapi
Severity: Error
Component: acl / ivacl_s_aznapi
Chapter 1. Tivoli Access Manager Base Messages
31
HPDAC1554E aznAPI -- Invalid EAS POP Trigger.
Name: ivacl_s_azn_s_svc_admin_pobj_
func_not_found
Explanation: The POP-based EAS trigger attribute
specified was not valid.
Number: 0x1005b615 (268809749)
Action: Ensure that the trigger conforms to the criteria
outlined in the Authorization C API Developer’s
Reference.
Severity: Error
Component: acl / ivacl_s_aznapi
Name: ivacl_s_azn_s_invalid_eas_pop_ trigger
HPDAC1558E aznAPI -- Invalid Protected Object.
Number: 0x1005b612 (268809746)
Explanation: The protected object structure passed as
a parameter is invalid.
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1555E aznAPI -- Invalid EAS Weighting.
Explanation: The weighting value specified was
negative or zero or the string could not be converted to
an unsigned integer.
Action: Ensure that the weighting is a positive
non-zero integer value that is no greater than
MAXULONG.
Name: ivacl_s_azn_s_invalid_eas_weighting_
Number: 0x1005b613 (268809747)
Severity: Error
Component: acl / ivacl_s_aznapi
Action: Ensure that the protected object structure
parameter is valid.
Name: ivacl_s_azn_s_invalid_pobj
Number: 0x1005b616 (268809750)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1559E aznAPI -- Invalid Protected Object
Reference.
Explanation: The protected object structure reference
passed as a parameter is invalid.
Action: Ensure that the protected object structure
reference parameter is not NULL.
Name: ivacl_s_azn_s_invalid_pobj_ref
HPDAC1556E aznAPI -- Unknown parameter
specified in EAS plugin service
definition.
Number: 0x1005b617 (268809751)
Explanation: The EAS service definition is incorrectly
formatted.
Component: acl / ivacl_s_aznapi
Action: Ensure that the EAS service definitions
conform to the criteria outlined in the Authorization C
API Developer’s Reference.
HPDAC1560E aznAPI -- Attribute Value is not of
type pobj.
Name: ivacl_s_azn_s_unknown_eas_svc_ parameter
Number: 0x1005b614 (268809748)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1557E aznAPI -- One or more protected
Object functions not implemented in
the Administration Service plugin’s
shared library.
Explanation: The aznAPI administration service
shared library does not export both an
azn_admin_get_object() and an
azn_admin_get_objectlist() interface.
Action: Review the service source code and build
process to ensure that the service plugin shared library
exports both the azn_admin_get_object() and the
azn_admin_get_objectlist() functions to applications.
32
Error Message Reference
Severity: Error
Explanation: The function interface requires an
azn_pobj_t typed attribute value.
Action: Ensure that the attribute value is of type
azn_pobj_t.
Name: ivacl_s_azn_s_attr_value_not_ pobj_type
Number: 0x1005b618 (268809752)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1561E aznAPI -- Unknown parameter
specified in Administration service
plugin’s definition.
Explanation: The Administration Service plugin
definition has a parameter that is invalid.
Action: Ensure that you have specified the correct
parameter in the AZN Administration Service plugin
definition. Refer to the publications for information
about supported parameters.
Name: ivacl_s_azn_s_svc_admin_unknown_ parameter
Number: 0x1005b619 (268809753)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1562E aznAPI -- Protected Object path is not
specified in Administration service
plugin’s definition.
Explanation: The Administration Service plugin
definition specifies the -pobj parameter without a
protected object hierarchy name following it.
Name: ivacl_s_azn_s_svc_admin_pobj_
already_registered
Number: 0x1005b61c (268809756)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1565E aznAPI -- Invalid Message ID
Reference.
Explanation: The message ID pointer parameter is
NULL.
Action: Ensure that the message ID pointer parameter
is not NULL
Action: Ensure that you have specified the correct
protected object hierarchy name following the -pobj
parameter in the Administration Service plugin
definition.
Name: ivacl_s_azn_s_invalid_message_ id_ref
Name: ivacl_s_azn_s_svc_admin_pobj_ not_specified
Component: acl / ivacl_s_aznapi
Number: 0x1005b61d (268809757)
Severity: Error
Number: 0x1005b61a (268809754)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1563E aznAPI -- One of the task functions is
not found in the Administration service
plugin’s shared library.
Explanation: The aznAPI administration service
shared library does not export both an
azn_admin_get_tasklist() and an azn_admin_get_task()
interface.
HPDAC1566E aznAPI -- Message for the major code
is not found.
Explanation: A message string for this major code was
not found in the message catalogs.
Action: Contact your IBM service representative for
more information about this message code.
Name: ivacl_s_azn_s_major_code_message_ not_found
Number: 0x1005b61e (268809758)
Severity: Error
Action: Review the service source code and build
process to ensure that the service plugin shared library
exports both the azn_admin_get_tasklist() and the
azn_admin_get_task() functions to applications.
Component: acl / ivacl_s_aznapi
Name: ivacl_s_azn_s_svc_admin_task_
func_not_found
Explanation: The function interface requires an
unsigned long attribute value.
Number: 0x1005b61b (268809755)
Severity: Error
Action: Ensure that the attribute value is of type
unsigned long.
Component: acl / ivacl_s_aznapi
Name: ivacl_s_azn_s_attr_value_not_ ulong_type
HPDAC1567E aznAPI -- Attribute Value is not of
type unsigned long.
Number: 0x1005b61f (268809759)
HPDAC1564E aznAPI -- Protected Object hierarchy
name has already been registered by
another Administration service
definition.
Severity: Error
Explanation: Another Administration Service
definition has already registered the protected object
hierarchy name being registered by the current
Administration Service definition.
HPDAC1568E aznAPI -- Administration Service -Invalid Service Info Handle passed to
plugin’s shared library.
Action: Specify another protected object hierarchy
name for this Administration Service definition or
modify the definition that uses this protected object
hierarchy name.
Action: Contact your IBM service representative.
Component: acl / ivacl_s_aznapi
Explanation: An internal error has occurred.
Name: ivacl_s_azn_s_svc_admin_invalid_ svcinfo_hdl
Chapter 1. Tivoli Access Manager Base Messages
33
Number: 0x1005b620 (268809760)
Name: ivacl_s_azn_s_svc_admin_invalid_ argument
Severity: Error
Number: 0x1005b624 (268809764)
Component: acl / ivacl_s_aznapi
Severity: Notice
Component: acl / ivacl_s_aznapi
HPDAC1569E aznAPI -- Administration Service -Invalid Argument Count passed to
plugin’s shared library.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: ivacl_s_azn_s_svc_admin_invalid_ arg_count
Number: 0x1005b621 (268809761)
Severity: Error
HPDAC1573I aznAPI -- Administration Service -Use the ’server listtasks <aznAPI
application name>’ command to
determine the list of tasks supported by
this aznAPI application.
Explanation: The specified task is not implemented by
any of the AZN Administration Service plugins
registered for this aznAPI application.
HPDAC1570E aznAPI -- Administration Service -Invalid Argument Array passed to
plugin’s shared library.
Action: Use the ’server listtasks <aznAPI application
name>’ command to determine the list of tasks
supported by this aznAPI application. If the task in
question is not shown on the list, make sure that the
AZN Administration Service plugin that implements
this task is registered by the aznAPI application.
Explanation: An internal error has occurred.
Name: ivacl_s_azn_s_svc_admin_invalid_ task
Action: Contact your IBM service representative.
Number: 0x1005b625 (268809765)
Name: ivacl_s_azn_s_svc_admin_invalid_ arg_array
Severity: Notice
Number: 0x1005b622 (268809762)
Component: acl / ivacl_s_aznapi
Component: acl / ivacl_s_aznapi
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1574E aznAPI -- Entitlements Service -Invalid Service Info Handle passed to
plugin’s shared library.
HPDAC1571E aznAPI -- Administration Service -Plugin’s shared library received an
out-of-memory error.
Explanation: An internal error has occurred.
Explanation: In most cases this error due to the
aznAPI application program running out of memory.
Name: ivacl_s_azn_s_svc_ent_invalid_ svcinfo_hdl
Action: Ensure that the application has been
configured with sufficient virtual memory for its
requirements. The Tivoli Access Manager Performance
Tuning Guide contains instructions on how to ensure
that the application is configured with the correct
amount of virtual memory. Stop and restart the process.
If the problem persists then contact your IBM service
representative.
Severity: Error
Name: ivacl_s_azn_s_svc_admin_out_ of_memory
Number: 0x1005b623 (268809763)
Severity: Error
Component: acl / ivacl_s_aznapi
Action: Contact your IBM service representative.
Number: 0x1005b626 (268809766)
Component: acl / ivacl_s_aznapi
HPDAC1575E aznAPI -- Entitlements Service -Invalid Argument Count passed to
plugin’s shared library.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: ivacl_s_azn_s_svc_ent_invalid_ arg_count
Number: 0x1005b627 (268809767)
Severity: Error
HPDAC1572I aznAPI -- Administration Service -Invalid Argument is passed to plugin’s
shared library.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
34
Error Message Reference
Component: acl / ivacl_s_aznapi
HPDAC1576E aznAPI -- Entitlements Service -Invalid Argument Array passed to
plugin’s shared library.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: ivacl_s_azn_s_svc_ent_invalid_ arg_array
Number: 0x1005b628 (268809768)
Severity: Error
Component: acl / ivacl_s_aznapi
Component: acl / ivacl_s_aznapi
HPDAC1580E aznAPI -- EAS -- Invalid Argument
Count passed to plugin’s shared library.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: ivacl_s_azn_s_svc_eas_invalid_ arg_count
Number: 0x1005b62c (268809772)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1577E aznAPI -- Entitlements Service -Plugin’s shared library received an
out-of-memory error.
Explanation: In most cases this error due to the
aznAPI application program running out of memory.
Action: Ensure that the application has been
configured with sufficient virtual memory for its
requirements. The Tivoli Access Manager Performance
Tuning Guide contains instructions on how to ensure
that the application is configured with the correct
amount of virtual memory. Stop and restart the process.
If the problem persists then contact your IBM service
representative.
Name: ivacl_s_azn_s_svc_ent_out_of_ memory
Number: 0x1005b629 (268809769)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1578I aznAPI -- Entitlements Service -Invalid Argument passed to plugin’s
shared library.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: ivacl_s_azn_s_svc_ent_invalid_ argument
Number: 0x1005b62a (268809770)
Severity: Notice
HPDAC1581E aznAPI -- EAS -- Invalid Argument
Array passed to plugin’s shared library.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: ivacl_s_azn_s_svc_eas_invalid_ arg_array
Number: 0x1005b62d (268809773)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1582E aznAPI -- EAS -- Plugin’s shared
library received an out-of-memory error.
Explanation: In most cases this error due to the
aznAPI application program running out of memory.
Action: Ensure that the application has been
configured with sufficient virtual memory for its
requirements. The Tivoli Access Manager Performance
Tuning Guide contains instructions on how to ensure
that the application is configured with the correct
amount of virtual memory. Stop and restart the process.
If the problem persists then contact your IBM service
representative.
Name: ivacl_s_azn_s_svc_eas_out_of_ memory
Number: 0x1005b62e (268809774)
Severity: Error
Component: acl / ivacl_s_aznapi
Component: acl / ivacl_s_aznapi
HPDAC1579E aznAPI -- EAS -- Invalid Service Info
Handle passed to plugin’s shared
library.
HPDAC1583I aznAPI -- EAS -- Invalid Argument
passed to plugin’s shared library.
Explanation: An internal error has occurred.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Action: Contact your IBM service representative.
Name: ivacl_s_azn_s_svc_eas_invalid_ argument
Name: ivacl_s_azn_s_svc_eas_invalid_ svcinfo_hdl
Number: 0x1005b62f (268809775)
Number: 0x1005b62b (268809771)
Severity: Notice
Severity: Error
Component: acl / ivacl_s_aznapi
Chapter 1. Tivoli Access Manager Base Messages
35
HPDAC1584E aznAPI -- Credential Modification
Service -- Invalid Service Info Handle
passed to plugin’s shared library.
Number: 0x1005b633 (268809779)
Severity: Error
Component: acl / ivacl_s_aznapi
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: ivacl_s_azn_s_svc_cred_mod_
invalid_svcinfo_hdl
Number: 0x1005b630 (268809776)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1585E aznAPI -- Credential Modification
Service -- Invalid Argument Count
passed to plugin’s shared library.
HPDAC1588I aznAPI -- Credential Modification
Service -- Invalid Argument passed to
plugin’s shared library.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: ivacl_s_azn_s_svc_cred_mod_
invalid_argument
Number: 0x1005b634 (268809780)
Severity: Notice
Component: acl / ivacl_s_aznapi
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: ivacl_s_azn_s_svc_cred_mod_
invalid_arg_count
Number: 0x1005b631 (268809777)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1589E aznAPI -- PAC Service -- Invalid
Service Info Handle passed to plugin’s
shared library.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: ivacl_s_azn_s_svc_pac_invalid_ svcinfo_hdl
Number: 0x1005b635 (268809781)
HPDAC1586E aznAPI -- Credential Modification
Service -- Invalid Argument Array
passed to plugin’s shared library.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: ivacl_s_azn_s_svc_cred_mod_
invalid_arg_array
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1590E aznAPI -- PAC Service -- Invalid
Argument Count passed to plugin’s
shared library.
Explanation: An internal error has occurred.
Number: 0x1005b632 (268809778)
Action: Contact your IBM service representative.
Severity: Error
Name: ivacl_s_azn_s_svc_pac_invalid_ arg_count
Component: acl / ivacl_s_aznapi
Number: 0x1005b636 (268809782)
Severity: Error
HPDAC1587E aznAPI -- Credential Modification
Service -- Plugin’s shared library
received an out-of-memory error.
Component: acl / ivacl_s_aznapi
Explanation: In most cases this error due to the
aznAPI application program running out of memory.
HPDAC1591E aznAPI -- PAC Service -- Invalid
Argument Array passed to plugin’s
shared library.
Action: Ensure that the application has been
configured with sufficient virtual memory for its
requirements. The Tivoli Access Manager Performance
Tuning Guide contains instructions on how to ensure
that the application is configured with the correct
amount of virtual memory. Stop and restart the process.
If the problem persists then contact your IBM service
representative.
Name: ivacl_s_azn_s_svc_cred_mod_ out_of_memory
36
Error Message Reference
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: ivacl_s_azn_s_svc_pac_invalid_ arg_array
Number: 0x1005b637 (268809783)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1592E aznAPI -- PAC Service -- Plugin’s
shared library received an
out-of-memory error.
Explanation: In most cases this error due to the
aznAPI application program running out of memory.
Action: Ensure that the application has been
configured with sufficient virtual memory for its
requirements. The Tivoli Access Manager Performance
Tuning Guide contains instructions on how to ensure
that the application is configured with the correct
amount of virtual memory. Stop and restart the process.
If the problem persists then contact your IBM service
representative.
Name: ivacl_s_azn_s_svc_pac_out_of_ memory
Number: 0x1005b638 (268809784)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1593I aznAPI -- PAC Service -- Invalid
Argument passed to plugin’s shared
library.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: ivacl_s_azn_s_svc_pac_invalid_ argument
Number: 0x1005b639 (268809785)
Severity: Notice
Component: acl / ivacl_s_aznapi
HPDAC1594E aznAPI -- Initialization failed because
a non-zero SSL-listening port is not
specified.
Explanation: aznAPI could not be initialized because a
non-zero SSL-listening port has not been specified. This
SSL-listening port is needed either because an AZN
Administration Service is registered OR local mode has
been configured and listen-flags have been set to
enable.
Action: Use svrsslcfg or edit the aznAPI configuration
file to specify a non-zero SSL-listening port
Action: Make sure you enter a valid aznAPI major
code. Look in the ogauthzn.h header file for valid
values for aznAPI major code.
Name: ivacl_s_azn_s_invalid_major_code
Number: 0x1005b63b (268809787)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1596E aznAPI -- Modification of the attribute
is prohibited.
Explanation: The specified attribute is read-only.
Modification of the attribute is prohibited. This is
because the attribute is an important attribute for the
purposes of authorization that will affect the user’s
access permissions if it is changed.
Action: Specify the name of an attribute that is not a
read-only attribute. If you want to add group
memberships to the credential then refer to the
Authorization C API Developer’s Reference for
information about the supplied credentials modification
service that can be used to add groups to a credential.
Name: ivacl_s_attr_readonly
Number: 0x1005b63c (268809788)
Severity: Error
Component: acl / ivacl_s_authzn
HPDAC1597E aznAPI -- azn_init_ssl_local_domain
cannot override the SSL-local-domain
entry in the aznAPI client configuration
file.
Explanation: The azn_init_ssl_local_domain
initialization attribute cannot override ssl-local-domain
entry that is specified in the aznAPI client
configuration file. These two entries must always match
because a client can be configured to run in only one
domain.
Action: The simplest action is to accept the configured
default for the authzn_authority parameter by
specifying NULL.
Name: ivacl_s_domain_conflict
Name: ivacl_s_azn_s_invalid_listening_ port
Number: 0x1005b63d (268809789)
Number: 0x1005b63a (268809786)
Severity: Error
Severity: Error
Component: acl / ivacl_s_authzn
Component: acl / ivacl_s_aznapi
HPDAC1595E aznAPI -- Major code is invalid.
Explanation: The major code portion of the aznAPI
status is invalid. So, the error string corresponding to it
cannot be retrieved by this API.
HPDAC1598E aznAPI -- Uninitialized Mechanism
Info structure.
Explanation: See message.
Action: Ensure that the mechanism info structure is
initialized to 0 for those un-used fields.
Chapter 1. Tivoli Access Manager Base Messages
37
Name: ivacl_s_azn_s_invalid_mechanism_ info_init
Number: 0x1005b63e (268809790)
Severity: Error
Component: acl / ivacl_s_aznapi
HPDAC1650E AZN Entitlements Extended Attributes
Service - app_context does not contain
any attribute names.
Explanation: No entitlements can be returned by this
API because the provided app_context does not specify
the object for which attributes are needed.
Action: Ensure that the app_context contains one of
the following valid attribute names - OBJ, ACL, or POP.
Name: ivacl_s_aznsvc_ent_ext_attr_
app_context_no_attr_name
Number: 0x1005b672 (268809842)
Severity: Error
Component: acl / ivacl_s_aznsvc
HPDAC1651E AZN Entitlements Extended Attributes
Service - app_context contains more
than one attribute name.
Explanation: No entitlements can be returned by this
API because the provided app_context contains more
than one object name for which attributes are needed.
Action: Ensure that the app_context contains only one
of the following valid attribute names - OBJ, ACL, POP
Name: ivacl_s_aznsvc_ent_ext_attr_
app_context_too_many_names
Number: 0x1005b673 (268809843)
Severity: Error
Component: acl / ivacl_s_aznsvc
HPDAC1652E AZN Entitlements Extended Attributes
Service - app_context contains an
invalid attribute name.
Explanation: No entitlements can be returned by this
API because the provided app_context contains an
invalid object name for which attributes are needed.
Action: Ensure that the app_context contains only one
of the following valid attribute names - OBJ, ACL, POP
Name: ivacl_s_aznsvc_ent_ext_attr_
app_context_invalid_name
Number: 0x1005b674 (268809844)
Severity: Error
Component: acl / ivacl_s_aznsvc
HPDAC1653E AZN service plug-in ″%s″ failed to
shutdown (0x%x/0x%x).
Explanation: A plug-in failed to shutdown correctly
and returned an error code to the service dispatcher.
Action: Check the returned error status for more
detail.
Name: ivacl_s_aznsvc_plugin_shutdown_ error
Number: 0x1005b675 (268809845)
Severity: Error
Component: acl / ivacl_s_aznsvc
HPDAC1654E The SOAP client of the AMWebARS
entitlement service returned an error.
Explanation: The SOAP request failed, and the gSOAP
client returned an error code which is printed in the
error log.
Action: Consult gSOAP documentation for the
meaning of the error code that accompanies this
message in the error log.
Name: ivacl_s_aznsvc_dynadi_soap_ comm_error
Number: 0x1005b676 (268809846)
Severity: Error
Component: acl / ivacl_s_aznsvc
HPDAC1655E The SOAP client of the AMWebARS
entitlement service returned the error
code: %d.
Explanation: The SOAP request failed, and the gSOAP
client returned the error code which is printed in the
error log.
Action: Consult gSOAP documentation for the
meaning of the error code that accompanies this
message in the error log.
Name: ivacl_s_aznsvc_dynadi_soap_
comm_error_detail
Number: 0x1005b677 (268809847)
Severity: Error
Component: acl / ivacl_s_aznsvc
HPDAC1656E The AMWebARS entitlement service
returned the internal error: ″%s″.
Explanation: The SOAP request succeeded, but the
AMWebARS Web Service returned an error message
which was printed to the error log.
Action: Review the accompanying error message and
ensure that the AMWebARS service is configured
correctly.
Name: ivacl_s_aznsvc_dynadi_internal_ error
38
Error Message Reference
Number: 0x1005b678 (268809848)
Severity: Error
Component: acl / ivacl_s_aznsvc
Action: Check that the service and attributes are
configured correctly in the configuration file.
Name: ivacl_s_aznsvc_cred_attrs_no_ conf_info
Number: 0x1005b67c (268809852)
HPDAC1657E The AMWebARS entitlement service
URL is NULL.
Severity: Warning
Component: acl / ivacl_s_aznsvc
Explanation: See message.
Action: Review the Tivoli Access Manager
authorization client configuration file and ensure that
the AMWebARS service URL has been specified
correctly.
Name: ivacl_s_aznsvc_dynadi_invalid_ service_url
Number: 0x1005b679 (268809849)
Severity: Error
Component: acl / ivacl_s_aznsvc
HPDAC1658E An error occurred loading the aznAPI
configuration file.
Explanation: See message.
Action: Review the aznAPI configuration file used to
initialize the AMWebARS service and ensure that it
exists and is a valid stanza format file and that the
entries conform to stanza format syntax.
Name: ivacl_s_aznsvc_dynadi_config_ load_failed
Number: 0x1005b67a (268809850)
Severity: Error
Component: acl / ivacl_s_client
HPDAC1659W No configuration file specified for
the credential attributes entitlement
service %s.
Explanation: This service might not function correctly
without proper configuration either from a file or API
input.
Action: If a configuration file was intended, check that
it is passed to the service either as an attribute or
argument to the service library.
Name: ivacl_s_aznsvc_cred_attrs_no_ confile
Number: 0x1005b67b (268809851)
Severity: Warning
Component: acl / ivacl_s_aznsvc
HPDAC1660W No service configuration information
was found in the specified file %s.
HPDAC1661W The registry operations for source
″%s″ failed.
Explanation: A registry operation failed for the
specified source. This source is skipped.
Action: No action needed.
Name: ivacl_s_aznsvc_cred_attrs_source_ failed
Number: 0x1005b67d (268809853)
Severity: Warning
Component: acl / ivacl_s_aznsvc
HPDAC1662I The attribute name ″%s″ was not
found in the credential.
Explanation: A configured source attribute does not
exist in the credential. The source must be a valid
attribute name that exist in the credential, or a valid
registry identifier. For example, the attribute
azn_cred_ldap_dn does not exist in an unauthenticated
credential, therefore, it is skipped.
Action: Check that the configured attribute name
exists in the credential.
Name: ivacl_s_aznsvc_cred_attrs_invalid_ attr_name
Number: 0x1005b67e (268809854)
Severity: Verbose notice
Component: acl / ivacl_s_aznsvc
HPDAC1663I The policy name is not a valid user
policy name .
Explanation: See message.
Action: Make sure that the policy name in the
application context is a valid p olicy name.
Name: ivacl_s_aznsvc_rgy_attrs_unknown_
policy_name
Number: 0x1005b67f (268809855)
Severity: Verbose notice
Component: acl / ivacl_s_aznsvc
Explanation: Service and attribute configuration was
not found in the configuration file. This causes the
servce to return withoout any entitlements.
Chapter 1. Tivoli Access Manager Base Messages
39
HPDAC1664I Registry Entitlements Service does not
support policy check for the spec ified
policy.
HPDAC1668E The AXIS client of the AMWebARS
entitlement service returned the unkno
wn error.
Explanation: See message.
Explanation: See message.
Action: Specify a supported policy.
Action: Contact your IBM service representative.
Name: ivacl_s_aznsvc_rgy_attrs_check_
policy_unsupport
Name: ivacl_s_aznsvc_axis_error
Number: 0x1005b680 (268809856)
Severity: Verbose notice
Number: 0x1005b684 (268809860)
Severity: Error
Component: acl / ivacl_s_aznsvc
Component: acl / ivacl_s_aznsvc
HPDAC1665I The format of the attribute value is
incorrect.
Explanation: See message.
Action: Make sure that the attribute value in the
application context has inva lid format.
Name: ivacl_s_aznsvc_rgy_attrs_invalid_ format
HPDAC1669E An unexpected AXIS exception was
caught during the call to AMWebArs we
b service. Refer to the error log for more
information about the exception.
Explanation: AXIS C++ client returned an exception
condition to AMWebArs entitlemen t service that was
not handled and not expected.
Number: 0x1005b681 (268809857)
Action: Refer to the error log to determine if an error
message accompanied th e e xception.
Severity: Verbose notice
Name: ivacl_s_aznsvc_unexpected_axis_ exception
Component: acl / ivacl_s_aznsvc
Number: 0x1005b685 (268809861)
Severity: Error
HPDAC1666I The attribute name specified in
application context is an unsupported
attribute.
Explanation: See message.
Action: Make sure that attribute name specified in the
application context is supported attribute.
Name: ivacl_s_aznsvc_rgy_attrs_attribute_ unsupport
Number: 0x1005b682 (268809858)
Severity: Verbose notice
Component: acl / ivacl_s_aznsvc
HPDAC1667E The AXIS client of the AMWebARS
entitlement service returned the error :
%s.
Explanation: The AXIS request failed, and the AXIS
C++ client returned the error wh ich is printed in the
error log.
Action: Consult AXIS documentation for the meaning
of the error.
Name: ivacl_s_aznsvc_axis_error_detail
Number: 0x1005b683 (268809859)
Severity: Error
Component: acl / ivacl_s_aznsvc
40
Error Message Reference
Component: acl / ivacl_s_general
HPDAC1670E An unexpected AXIS exception was
caught during the call to AMWebArs we
b service. Error message ″%s″ was
returned with the exception.
Explanation: AXIS returned an exception condition to
the AMWebARS entitlement servi ce that was not
handled and not expected.
Action: Refer to the error log to determine if an error
message accompanied th e e xception.
Name: ivacl_s_aznsvc_unexpected_axis_
exception_detail
Number: 0x1005b686 (268809862)
Severity: Error
Component: acl / ivacl_s_general
HPDAC1950E Registry client unavailable.
Explanation: This failure can occur when the registry
server configuration settings are incorrect, or when the
Tivoli Access Manager runtime is incorrectly configured
for a registry type other than that required.
Action: Ensure that you have correctly configured the
Tivoli Access Manager Runtime package for the desired
user registry. The current user registry setting can be
determined by looking at the ’user-reg-type’ entry in
the [pdrte] stanza of the ’etc/pd.conf’ file in the Tivoli
Access Manager install directory. If the runtime is
configured incorrectly, you will need to unconfigure all
packages and reconfigure the machine again. If the
runtime has been correctly configured, then ensure that
the configuration parameters specified for the user
registry server are correct.
Name: ivacl_s__registry_client_unavailable_
Number: 0x1005b79e (268810142)
Severity: Error
Component: acl / ivacl_s_mgmt
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC1954E SSL communications with the registry
returned an error.
Explanation: See message.
Action: Shutdown and restart the registry server. If
the problem persists then contact your IBM service
representative.
Name: ivacl_s_registry_ssl_error
Number: 0x1005b7a2 (268810146)
HPDAC1951E Registry client returned a memory
error.
Explanation: The registry client encountered a
memory error.
Action: Ensure that the affected process has been
configured with sufficient virtual memory for its
requirements. Stop and restart the process. If the
problem persists then contact your IBM service
representative.
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC1955E Non-SSL registry communications
returned an error.
Explanation: See message.
Name: ivacl_s__registry_client_memory_ error
Action: Shutdown and restart the registry server. If
the problem persists then contact your IBM service
representative.
Number: 0x1005b79f (268810143)
Name: ivacl_s_registry_nonssl_error
Severity: Error
Number: 0x1005b7a3 (268810147)
Component: acl / ivacl_s_mgmt
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC1952E Registry configuration file has invalid
contents.
Explanation: The user registry configuration file is
invalid.
Action: Review the registry configuration file in the
Tivoli Access Manager ’etc’ directory and ensure that
the entries are valid. If the problems persists then
reconfigure the Tivoli Access Manager runtime
package.
Name: ivacl_s_registry_config_invalid
Number: 0x1005b7a0 (268810144)
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC1953E Registry failed opening or closing a
database file.
Explanation: See message.
Action: Shutdown and restart the registry server. If
the problem persists then contact your IBM service
representative.
Name: ivacl_s_registry_db_io_error
Number: 0x1005b7a1 (268810145)
HPDAC1956E Registry client initialization failed.
Explanation: A registry API call was made with an
invalid parameter, or the registry type could not be
determined or the registry is not configured correctly.
Action: Shutdown and restart the registry server. If
the problem persists then contact your IBM service
representative.
Name: ivacl_s_registry_init_error
Number: 0x1005b7a4 (268810148)
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC1957E Registry server is down or cannot be
contacted.
Explanation: The user registry server is not running.
Action: Ensure that the user registry server is running
and that the registry client has been correctly
configured to communicate with the server.
Name: ivacl_s__registry_server_down
Number: 0x1005b7a5 (268810149)
Severity: Error
Chapter 1. Tivoli Access Manager Base Messages
41
Component: acl / ivacl_s_mgmt
Severity: Warning
Component: acl / ivacl_s_mgmt
HPDAC1958E Authentication data was incorrectly
specified or it is missing.
Explanation: The aznAPI runtime was unable to
authenticate to the user registry.
Action: Ensure that the user registry is configured
correctly, that it is operational and that the
authentication parameters supplied are valid.
HPDAC1963E Unable to locate a group in the
registry with the name supplied.
Explanation: The specified group name was not found
in the registry database.
Name: ivacl_s_registry_invalid_auth_pwd
Action: Verify that the group name is spelled correctly
and that it exists in the registry database for the
domain to which you are logged in.
Number: 0x1005b7a6 (268810150)
Name: ivacl_s_registry_group_name_ not_found
Severity: Error
Number: 0x1005b7ab (268810155)
Component: acl / ivacl_s_mgmt
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC1959E Specified member was not found in
the registry group.
Explanation: The group has no members or the
specified member was not found in the group.
Action: Verify that the group name and member name
is spelled correctly and that they both exist in the
registry database for the domain to which you are
logged in.
Name: ivacl_s_registry_member_not_found
Number: 0x1005b7a7 (268810151)
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC1961E Multiple registry routing is not
supported.
Explanation: An attempt was made to use multiple
registry routing, which is not a supported function.
Action: Disable multiple registry routing in the client
and your applications. Contact your IBM service
representative for further information.
HPDAC1965E Invalid user type specified.
Explanation: An internal error has occurred. When the
calling program requested a list of users from the
registry it did not specify one of the 3 permitted user
types.
Action: Contact your IBM service representative.
Name: ivacl_s_registry_invalid_user_type
Number: 0x1005b7ad (268810157)
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC1966E Invalid group type specified.
Explanation: An internal error has occurred. When the
calling program requested a list of groups from the
registry it did not specify one of the 3 permitted group
types.
Action: Contact your IBM service representative.
Name: ivacl_s_registry_invalid_group_ type
Name: ivacl_s_registry_no_routing
Number: 0x1005b7ae (268810158)
Number: 0x1005b7a9 (268810153)
Severity: Error
Severity: Error
Component: acl / ivacl_s_mgmt
Component: acl / ivacl_s_mgmt
HPDAC1962W The end of the registry list has been
reached.
Explanation: An internal error has occurred. A
program processing a list of registry entries has tried to
get an entry beyond the end of the list.
Action: Contact your IBM service representative.
Name: ivacl_s_registry_end_of_list
Number: 0x1005b7aa (268810154)
42
Error Message Reference
HPDAC1967E Group name is invalid or not found in
the registry.
Explanation: A group operation was attempted for the
wrong domain or the group’s registry GID value (also
known as the DN) was invalid. The DN entered might
contain invalid characters or be in an invalid format.
Action: Correct the registry group name (or DN) that
you specified and retry the operation.
Name: ivacl_s_registry_invalid_group
Number: 0x1005b7af (268810159)
Severity: Error
Severity: Error
Component: acl / ivacl_s_mgmt
Component: acl / ivacl_s_mgmt
HPDAC1968E Policy name is invalid or not found in
the registry.
Explanation: An internal error has occurred. A user
specific policy that was expected to be in the registry
was not found.
HPDAC1972E The specified user is already in the
registry.
Explanation: A user with the specified name is
already in the registry.
Action: Select another name or a variation for this
user.
Action: Contact your IBM service representative.
Name: ivacl_s_registry_dupe_user
Name: ivacl_s_registry_invalid_policy
Number: 0x1005b7b4 (268810164)
Number: 0x1005b7b0 (268810160)
Severity: Error
Severity: Error
Component: acl / ivacl_s_mgmt
Component: acl / ivacl_s_mgmt
HPDAC1969E Resource name is invalid or not found
in the registry.
Explanation: An internal error has occurred. A
resource that was expected to be in the registry was not
found.
HPDAC1973E The specified group is already in the
registry.
Explanation: A group with the specified name is
already in the registry.
Action: Select another name or a variation for this
group.
Action: Contact your IBM service representative.
Name: ivacl_s_registry_dupe_group
Name: ivacl_s_registry_invalid_resource
Number: 0x1005b7b5 (268810165)
Number: 0x1005b7b1 (268810161)
Severity: Error
Severity: Error
Component: acl / ivacl_s_mgmt
Component: acl / ivacl_s_mgmt
HPDAC1970E Resource group name is invalid or not
found in the registry.
Explanation: An internal error has occurred. A
resource group that was expected to be in the registry
was not found.
Action: Contact your IBM service representative.
Name: ivacl_s_registry_invalid_resgroup
Number: 0x1005b7b2 (268810162)
HPDAC1974E The specified policy is already in the
registry.
Explanation: A policy object already exists for the
specified user.
Action: Contact your IBM service representative.
Name: ivacl_s_registry_dupe_policy
Number: 0x1005b7b6 (268810166)
Severity: Error
Component: acl / ivacl_s_mgmt
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC1975E The specified resource is already in
the registry.
HPDAC1971E User’s Resource Credentials are
invalid or not found in the registry.
Explanation: A resource object already exists with the
specified name.
Explanation: An internal error has occurred. A
resource credential that was expected to be in the
registry was not found.
Action: Select another name for the new resource
object.
Action: Contact your IBM service representative.
Name: ivacl_s_registry_invalid_rescreds
Number: 0x1005b7b3 (268810163)
Name: ivacl_s_registry_dupe_resource
Number: 0x1005b7b7 (268810167)
Severity: Error
Component: acl / ivacl_s_mgmt
Chapter 1. Tivoli Access Manager Base Messages
43
HPDAC1976E The specified resource group is
already in the registry.
HPDAC1980E Registry client returned a failure
status.
Explanation: A resource group object with the
specified name already exists in the registry.
Explanation: The user registry client returned an error
code that was unexpected or unknown to Tivoli Access
Manager.
Action: Select another name for the new resource
group object.
Action: Contact your IBM service representative.
Name: ivacl_s_registry_dupe_resgroup
Name: ivacl_s__registry_client_error
Number: 0x1005b7b8 (268810168)
Number: 0x1005b7bc (268810172)
Severity: Error
Severity: Error
Component: acl / ivacl_s_mgmt
Component: acl / ivacl_s_mgmt
HPDAC1977E The specified resource credentials are
already in the registry.
HPDAU0100E Invalid config URL
Explanation: A resource credential object with the
specified name already exists.
Action: Select another name for which to create a
resource credential object.
Name: ivacl_s_registry_dupe_rescreds
Number: 0x1005b7b9 (268810169)
Severity: Error
Explanation: A Non null config URL should be passed
for AMAuditServer constructor
Action: Ensure that a non null configURL is passed to
the AMAuditServer constructor
Name: bau_invalid_cfgurl
Number: 0x30654064 (811941988)
Severity: Error
Component: bau / bau_s_general
Component: acl / ivacl_s_mgmt
HPDAU0101E Invalid listen port:
HPDAC1978E Multiple users found in the registry
using the specified search criteria.
Explanation: More than one user in the registry shares
the specified name.
Action: Select another user name or modify the users
to have unique names.
Name: ivacl_s_registry_multiple_users
Number: 0x1005b7ba (268810170)
Severity: Error
Component: acl / ivacl_s_mgmt
HPDAC1979E Multiple groups found in the registry
using the specified search criteria.
Explanation: Ensure that a non null port is specified,
and the AMAuditServer is not already running.
Action: Either the port is not specified or the port is
already in use
Name: bau_invalid_listen_port
Number: 0x30654065 (811941989)
Severity: Error
Component: bau / bau_s_general
HPDAU0102E Socket listen error
Explanation: Error Listening to the socket
Action: Error listening to the socket
Explanation: More than one group in the registry
shares the specified name.
Name: bau_socket_listen_error
Action: Select another group name or modify the
groups to have unique names.
Severity: Error
Name: ivacl_s_registry_multiple_groups
Component: bau / bau_s_general
Number: 0x1005b7bb (268810171)
Severity: Error
Component: acl / ivacl_s_mgmt
Number: 0x30654066 (811941990)
HPDAU0103E Invalid command line argument list
Explanation: Invalid arguments, Make sure the
command line arguments are correct
Action: Make sure the command line arguments are
correct
44
Error Message Reference
Name: bau_invalid_cmd_arg_list
Number: 0x30654067 (811941991)
Severity: Error
Component: bau / bau_s_general
HPDAU0104E Config file properties not found %s .
Explanation: Make sure the config file exists and it is
valid
HPDAU0108E AMAudit component is already inited.
Explanation: AMAudit component is already inited.
Action: AMAudit component is already inited.
Name: bau_comp_already_inited
Number: 0x3065406c (811941996)
Severity: Error
Component: bau / bau_s_general
Action: A valid config file should be specified.
Name: bau_cfg_file_missing_propty
Number: 0x30654068 (811941992)
Severity: Error
Component: bau / bau_s_general
HPDAU0109E AMAudit component is not inited.
Explanation: AMAudit shutdown called before calling
AMAudit init.
Action: AMAudit component should be inited before
calling shutdown.
Name: bau_comp_not_inited
HPDAU0105E Properties file %s not found.
Explanation: Make sure the properties file exists and
it is valid
Action: Ensure that the properties file exists and is
valid.
Name: bau_missing_propty_file
Number: 0x30654069 (811941993)
Severity: Error
Component: bau / bau_s_general
Number: 0x3065406d (811941997)
Severity: Error
Component: bau / bau_s_general
HPDAU0110E AMAudit component is not shutdown.
Explanation: AMAudit component is not shutdown.
Action: AMAudit component is not shutdown.
Name: bau_comp_not_shutdown
Number: 0x3065406e (811941998)
HPDAU0106E Properties not found.
Severity: Error
Explanation: Make sure the properties exists and it is
valid
Component: bau / bau_s_general
Action: Ensure that the properties exists and is valid.
HPDAU0111E No acceptor class.
Name: bau_missing_propty
Explanation: No acceptor class specified.
Number: 0x3065406a (811941994)
Action: Specify a valid acceptor
Severity: Error
Name: bau_conn_err
Component: bau / bau_s_general
Number: 0x3065406f (811941999)
Severity: Error
HPDAU0107E Acceptor wait failed; no connection
was created
Component: bau / bau_s_general
Explanation: Acceptor wait failed; no connection was
created
HPDAU0112E Bad acceptor class : %s.
Action: Acceptor wait failed; no connection was
created
Explanation: Bad acceptor class specified.
Action: Specify a valid acceptor
Name: bau_acceptor_wait_failed
Name: bau_bad_conn_err
Number: 0x3065406b (811941995)
Number: 0x30654070 (811942000)
Severity: Error
Severity: Error
Component: bau / bau_s_general
Component: bau / bau_s_general
Chapter 1. Tivoli Access Manager Base Messages
45
HPDAU0113E Could not initialize acceptor : %s on
on attempt # %s
Explanation: Bad or no acceptor class.
Number: 0x30654076 (811942006)
Severity: Error
Component: bau / bau_s_general
Action: Specify a valid acceptor
Name: bau_accp_init
Number: 0x30654071 (811942001)
Severity: Error
Component: bau / bau_s_general
HPDAU0119E Unable to execute archive program %s.
Explanation: Archive cmdFile should exist.
Action: Ensure that executable file exists.
Name: bau_unable_to_execute
Number: 0x30654077 (811942007)
HPDAU0114E Invalid argument: Null messages.
Severity: Error
Explanation: A nonnull PDMessages object is required
to hold any return messages that might be generated
during the operation. Typically, this object contains no
messages on input.
Component: bau / bau_s_general
Action: Ensure that the messages argument is nonnull.
HPDAU0120E A database error occured while
exporting the table
Name: bau_invalid_msgs
Explanation: A database error occured while exporting
the table.
Number: 0x30654072 (811942002)
Action: No action required.
Severity: Error
Name: bau_database_export_error
Component: bau / bau_s_general
Number: 0x30654078 (811942008)
Severity: Error
HPDAU0116E Wild char not in template.
Component: bau / bau_s_general
Explanation: Wild char required in the template.
Action: Ensure that the wild char is in the template.
Name: bau_missing_wild_char
Number: 0x30654074 (811942004)
Severity: Error
Component: bau / bau_s_general
HPDAU0117E Invalid Archive file prefix.
Explanation: Archive file names cannot be a directory.
Action: Ensure that the Archive file name is not a
directory.
Name: bau_invalid_archive_file_prefix
Number: 0x30654075 (811942005)
Severity: Error
HPDAU0121E Archive program was interrupted by
user
Explanation: Archive program was interrupted by
user.
Action: No action required.
Name: bau_program_interrupted
Number: 0x30654079 (811942009)
Severity: Error
Component: bau / bau_s_general
HPDAU0122E Invalid command line option was
specified
Explanation: Valid command line options are
required.
Component: bau / bau_s_general
Action: Ensure that the command line options are
valid.
HPDAU0118E Archive file create error.
Name: bau_invalid_cmd_ops
Explanation: No write permission on the archive
directory
Number: 0x3065407a (811942010)
Action: Ensure that you have write permission on the
directory where the archive file is created.
Name: bau_archive_create_error
46
Error Message Reference
Severity: Error
Component: bau / bau_s_general
HPDAU0123E Unable to purge audit record.
HPDAU0128E Unable to sign data.
Explanation: Unable to purge audit record.
Explanation: Unable to sign data.
Action: No action required.
Action: Ensure that you can sign the data.
Name: bau_unable_to_purge
Name: bau_keystore_sign_error
Number: 0x3065407b (811942011)
Number: 0x30654080 (811942016)
Severity: Error
Severity: Error
Component: bau / bau_s_general
Component: bau / bau_s_general
HPDAU0124E Archive and signing was successful
for file %s.
HPDAU0134E Unable to send audit event to server,
%s :
Explanation: Archive and signing was successful.
Explanation: AuditServer should be up and running.
Action: No action required.
Action: Ensure that the AuditServer is running
Name: bau_archive_sign_success
Name: bau_event_send_error
Number: 0x3065407c (811942012)
Number: 0x30654086 (811942022)
Severity: Error
Severity: Error
Component: bau / bau_s_general
Component: bau / bau_s_general
HPDAU0125E Archive and signing failed for file %s.
HPDAU0135E Unknown host : %s, port : %s
Explanation: Archive and signing failed.
Explanation: Valid host and port where AuditServer is
running, is required.
Action: No action required.
Name: bau_archive_sign_failed
Number: 0x3065407d (811942013)
Severity: Error
Component: bau / bau_s_general
Action: Ensure that the host and port are valid
Name: bau_unknown_host
Number: 0x30654087 (811942023)
Severity: Error
Component: bau / bau_s_general
HPDAU0126E Signing key could not be unlocked
Explanation: Signing key should be accessible.
Action: Ensure that the signing key is accesible.
HPDAU0136E Connection exception, connecting to
host : %s, port : %s
Name: bau_archive_sign_lock_error
Explanation: Valid host and port where AuditServer is
running, is required.
Number: 0x3065407e (811942014)
Action: Ensure that the host and port are valid
Severity: Error
Name: bau_conn_error
Component: bau / bau_s_general
Number: 0x30654088 (811942024)
Severity: Error
HPDAU0127E Unable to write to the signature file.
Component: bau / bau_s_general
Explanation: Unable to write to signature file.
Action: Ensure that you have valid signature file.
Name: bau_unable_to_write
HPDAU0137E IOException connecting to audit
server : %s, port : %s
Number: 0x3065407f (811942015)
Explanation: Valid host and port where AuditServer is
running, is required.
Severity: Error
Action: Ensure that the host and port are valid
Component: bau / bau_s_general
Name: bau_io_error
Number: 0x30654089 (811942025)
Chapter 1. Tivoli Access Manager Base Messages
47
Severity: Error
Component: bau / bau_s_general
HPDAU0138E Bad properties file %s.
Explanation: Make sure the properties file exists and
it is valid
Action: A valid properties file should be specified.
Name: bau_bad_prop_file
Number: 0x3065408a (811942026)
HPDAU0143E Couldn’t get server port
Explanation: Server port should be present in the
client properties file.
Action: Ensure that the client properties file contains
server port.
Name: bau_no_server_port
Number: 0x3065408f (811942031)
Severity: Error
Component: bau / bau_s_general
Severity: Error
Component: bau / bau_s_general
HPDAU0139E Could not check if there are more
record from audit_log query
Explanation: Make sure that there is no problem,
while reading the log.
Action: Ensure that there is no problem while
querying the log.
Name: bau_log_query_check
Number: 0x3065408b (811942027)
Severity: Error
Component: bau / bau_s_general
HPDAU0140E Audit record access failed.
Explanation: Make sure that there is no problem
accessing the audit records.
Action: Ensure that there is no problem accessing the
audit records.
Name: bau_db_access_audit_rec_error
Number: 0x3065408c (811942028)
Severity: Error
Component: bau / bau_s_general
HPDAU0142E Couldn’t get client source
Explanation: Client source should be present in the
client properties file.
Action: Ensure that the client properties file contains
client source.
Name: bau_no_client_source
Number: 0x3065408e (811942030)
Severity: Error
Component: bau / bau_s_general
HPDAU0144E Couldn’t get server host
Explanation: Server host should be present in the
client properties file.
Action: Ensure that the client properties file contains
server host.
Name: bau_no_server_host
Number: 0x30654090 (811942032)
Severity: Error
Component: bau / bau_s_general
HPDAU0145E Couldn’t get doAudit string
Explanation: doAudit string should be present in the
client properties file.
Action: Ensure that the client properties file contains
doAudit string.
Name: bau_no_doaudit_str
Number: 0x30654091 (811942033)
Severity: Error
Component: bau / bau_s_general
HPDAU0146E Couldn’t get delivery policy
Explanation: Delivery policy should be present in the
client properties file.
Action: Ensure that the client properties file contains
delivery policy.
Name: bau_no_delivery_policy
Number: 0x30654092 (811942034)
Severity: Error
Component: bau / bau_s_general
HPDAU0147E Error initializing client delivery policy
Explanation: A valid client properties file required.
Action: Ensure that the client properties file is valid.
Name: bau_client_del_init_error
48
Error Message Reference
Number: 0x30654093 (811942035)
Severity: Error
Component: bau / bau_s_general
HPDAU0148E AMAuditServer connection is not
initialized
Explanation: AMAuditServer should be running so
client can connect to it.
HPDAU0152E Audit record insertion failed :
Explanation: Ensure that there is no SQL error.
Action: Ensure that there is no SQL error.
Name: bau_audit_rec_insertion_fail
Number: 0x30654098 (811942040)
Severity: Error
Component: bau / bau_s_general
Action: Ensure that the AMAuditServer is running.
Name: bau_null_audit_server_conn
Number: 0x30654094 (811942036)
Severity: Error
Component: bau / bau_s_general
HPDAU0149E Invalid driver manager: %s
Explanation: Driver manager should be valid.
Action: Ensure that the driver manager is valid.
Name: bau_inv_db_driver
HPDAU0153E Config file is already specified in
command args
Explanation: Config file is already specified in
command args.
Action: Config file is already specified in command
args.
Name: bau_conf_file_already_set
Number: 0x30654099 (811942041)
Severity: Error
Component: bau / bau_s_general
Number: 0x30654095 (811942037)
Severity: Error
HPDAU0158E Audit database is not initialized
Component: bau / bau_s_general
Explanation: Audit database should be initialized.
Action: Ensure that the Audit database is initialized.
HPDAU0150E Could not connect to database, url =
%s
Explanation: A valid database url is required.
Action: Ensure that the database url is valid.
Name: bau_db_conn_error
Number: 0x30654096 (811942038)
Severity: Error
Component: bau / bau_s_general
HPDAU0151E Failed to Initialize AMAuditLogWriter
Explanation: Ensure that AMAuditLogWriter can be
initialized without any errors.
Name: bau_audit_database_not_inited
Number: 0x3065409e (811942046)
Severity: Error
Component: bau / bau_s_general
HPDAU0159E No Services configured : %s
Explanation: Services should be configured.
Action: Ensure that at least one service is configured.
Name: bau_no_services_configured
Number: 0x3065409f (811942047)
Severity: Error
Action: Ensure that AMAuditLogWriter can be
initialized without any errors.
Component: bau / bau_s_general
Name: bau_init_auditlogwriter_error
HPDAU0208E Error Reading input stream;
abandoning Connection.
Number: 0x30654097 (811942039)
Severity: Error
Component: bau / bau_s_general
Explanation: A valid message input stream required.
Action: Ensure that the message InputStream valid
Name: bau_input_stream_error
Number: 0x306540d0 (811942096)
Severity: Error
Chapter 1. Tivoli Access Manager Base Messages
49
Component: bau / bau_s_daemon
Number: 0x306540d5 (811942101)
Severity: Error
HPDAU0209E Error Reading input stream end of file
; aborting Connection.
Component: bau / bau_s_daemon
Explanation: A valid End of File for input stream
required.
HPDAU0214E Error reading configuration file
Action: Ensure that the input stream has a valid End
of File.
Explanation: A valid configuration required.
Action: Ensure that the configuration is valid.
Name: bau_input_stream_eof_error
Name: bau_config_file_read_error
Number: 0x306540d1 (811942097)
Number: 0x306540d6 (811942102)
Severity: Error
Severity: Error
Component: bau / bau_s_daemon
Component: bau / bau_s_daemon
HPDAU0210E Unexpected connection termination.
HPDAU0215E Configuration file not found: %s
Explanation: A valid connection required.
Explanation: A valid configuration required.
Action: Ensure that there is no Unexpected connection
termination.
Action: Ensure that the configuration exists and is
valid.
Name: bau_unexp_conn_termination
Name: bau_config_file_not_found
Number: 0x306540d2 (811942098)
Number: 0x306540d7 (811942103)
Severity: Error
Severity: Error
Component: bau / bau_s_daemon
Component: bau / bau_s_daemon
HPDAU0211E Bad configuration file: %s
HPDAU0216E Configuration file not found:
Explanation: A valid configuration required.
Explanation: A valid configuration required.
Action: Ensure that the configuration is valid.
Action: Ensure that the configuration exists and is
valid.
Name: bau_bad_configuration_file
Number: 0x306540d3 (811942099)
Severity: Error
Component: bau / bau_s_daemon
Name: bau_conf_file_not_found
Number: 0x306540d8 (811942104)
Severity: Error
Component: bau / bau_s_daemon
HPDAU0212E Bad configuration, cannot continue.
Explanation: A valid configuration required.
Action: Ensure that the configuration is valid.
Name: bau_bad_configuration
Number: 0x306540d4 (811942100)
Severity: Error
Component: bau / bau_s_daemon
HPDAU0217E Event config filename cannot be null
Explanation: A Non null config file required.
Action: Ensure that the config file is not null.
Name: bau_null_config_file
Number: 0x306540d9 (811942105)
Severity: Error
Component: bau / bau_s_general
HPDAU0213E Input stream or output stream is null.
Explanation: A valid Input and output stream
required.
Action: Ensure that the input stream or output stream
is not null..
Name: bau_null_input_output_stream
50
Error Message Reference
HPDAU0218E Bad event stream format : %s
Explanation: Event stream should contain ’true’ or
’false’.
Action: Expecting ’true’ or ’false’ in event stream.
Name: bau_bad_event_stream_format_ boolean
Number: 0x306540da (811942106)
Severity: Error
HPDAU0224E SQL error : Daemon could not access
System table
Component: bau / bau_s_daemon
Explanation: The system table should be accessible.
Action: Ensure that the system table is accessible.
HPDAU0219E Bad event stream format : %s
Explanation: Event stream should contain numbers.
Action: Expecting number in event stream.
Name: bau_bad_event_stream_format_int
Name: bau_sys_table_access_error
Number: 0x306540e0 (811942112)
Severity: Error
Component: bau / bau_s_daemon
Number: 0x306540db (811942107)
Severity: Error
Component: bau / bau_s_daemon
HPDAU0220E Bad event stream format, type value =
: %s
Explanation: Event config stream should contain
string.
Action: Expecting string in event config stream.
Name: bau_bad_event_stream_format_object
HPDAU0225E SQL error : Could not insert event to
database
Explanation: Could not insert the event into the
database.
Action: Ensure that the database is accessible.
Name: bau_insert_event_error
Number: 0x306540e1 (811942113)
Severity: Error
Component: bau / bau_s_daemon
Number: 0x306540dc (811942108)
Severity: Error
Component: bau / bau_s_daemon
HPDAU0221E Bad event stream format, type value =
: %s
HPDAU0226E SQL error : Could not insert element
to database: %s
Explanation: Could not insert the element into the
database.
Action: Ensure that the database is accessible.
Explanation: Event stream should contain character.
Name: bau_insert_element_error
Action: Expecting character in event config stream.
Number: 0x306540e2 (811942114)
Name: bau_bad_event_stream_format_char
Severity: Error
Number: 0x306540dd (811942109)
Component: bau / bau_s_daemon
Severity: Error
Component: bau / bau_s_daemon
HPDAU0222E Daemon configuration error, config
file = : %s
Explanation: Error configuring daemon.
Action: Error configuring daemon.
Name: bau_daemon_config_err
Number: 0x306540de (811942110)
Severity: Error
Component: bau / bau_s_daemon
HPDAU0227E SQL error : Could not insert attribute
to database: %s
Explanation: Could not insert the attribute into the
database.
Action: Ensure that the database is accessible.
Name: bau_insert_attribute_error
Number: 0x306540e3 (811942115)
Severity: Error
Component: bau / bau_s_daemon
HPDAU0228E Can’t find
COM.ibm.db2.jdbc.app.DB2Driver
Explanation: COM.ibm.db2.jdbc.app.DB2Driver
should be in the classpath.
Action: Ensure that the class
Chapter 1. Tivoli Access Manager Base Messages
51
COM.ibm.db2.jdbc.app.DB2Driver is in path
Name: bau_error_reading_event_config_ table
Name: bau_db2_class_not_found
Number: 0x30654130 (811942192)
Number: 0x306540e4 (811942116)
Severity: Error
Severity: Error
Component: bau / bau_s_event
Component: bau / bau_s_daemon
HPDAU0300E Invalid service name
Explanation: A Non null eventName is required.
Action: Ensure that a non null eventName is specified
Name: bau_invalid_service_name
Number: 0x3065412c (811942188)
Severity: Error
Component: bau / bau_s_event
HPDAU0301E Invalid service count
Explanation: A valid service count is required.
Action: Ensure that a valid service count is specified
Name: bau_invalid_service_count
Number: 0x3065412d (811942189)
Severity: Error
Component: bau / bau_s_event
HPDAU0305E Event could not be found in config
table: %s
Explanation: Config table should contain the event.
Action: Ensure that the event exists in the config table.
Name: bau_event_not_found
Number: 0x30654131 (811942193)
Severity: Error
Component: bau / bau_s_event
HPDAU0400E Could not find msg class name in msg
header
Explanation: A valid message class required in
message header.
Action: Ensure that the message header has message
class.
Name: bau_class_name_not_found
Number: 0x30654190 (811942288)
Severity: Error
HPDAU0302E Invalid event count
Component: bau / bau_s_msg
Explanation: A valid event count is required.
Action: Ensure that a valid event count is specified
Name: bau_invalid_event_count
Number: 0x3065412e (811942190)
HPDAU0401E Message class could not be found
Explanation: A valid message class required in input
stream.
Severity: Error
Action: Ensure that input stream has valid message
class.
Component: bau / bau_s_event
Name: bau_class_not_found
Number: 0x30654191 (811942289)
HPDAU0303E Error reading event table
Severity: Error
Explanation: A valid event table is required.
Component: bau / bau_s_msg
Action: Ensure that the event table is valid.
Name: bau_error_reading_event_table
Number: 0x3065412f (811942191)
HPDAU0402E Message class could not be
instantiated
Severity: Error
Explanation: A valid message class that can be
instantiated is required.
Component: bau / bau_s_event
Action: Ensure that message class can be instantiated.
HPDAU0304E Error reading event config table: %s
Explanation: A valid event config table is required.
Action: Ensure that the event config table is valid.
52
Error Message Reference
Name: bau_msg_class_cannot_inst
Number: 0x30654192 (811942290)
Severity: Error
Component: bau / bau_s_msg
HPDAU0403E ’End-of-msg’ char not found in stream
Explanation: A valid ’End-of-msg’ character required
in message input stream.
Action: Ensure that message input strean has
’End-of-msg’ character.
Name: bau_bad_EOF
Number: 0x30654193 (811942291)
Severity: Error
Component: bau / bau_s_msg
Number: 0x306541f4 (811942388)
Severity: Error
Component: bau / bau_s_service
HPDAU0501E Service could not be initialized.
Service name = %s
Explanation: A valid service is required.
Action: Ensure that a valid service name is specified
Name: bau_service_init_failed
Number: 0x306541f5 (811942389)
HPDAU0404E Unexpected end of msg stream : %s
Severity: Error
Explanation: A valid ’End-of-msg’ character required
in message input stream.
Component: bau / bau_s_service
Action: Ensure that message input strean has
’End-of-msg’ character.
HPDAU0502E Deleivery policy initialization failed.
Service name = %s
Name: bau_unexpected_end_of_msg
Explanation: A valid delivery policy service is
required.
Number: 0x30654194 (811942292)
Severity: Error
Component: bau / bau_s_msg
Action: Ensure that a valid delivery policy is specified
Name: bau_del_policy_init_fail
Number: 0x306541f6 (811942390)
HPDAU0405E Failed closing service : %s
Severity: Error
Explanation: Service could not be closed.
Component: bau / bau_s_service
Action: Failed closing service.
Name: bau_failed_closing_serv
Number: 0x30654195 (811942293)
Severity: Error
Component: bau / bau_s_msg
HPDAU0505E Problem decoding audit event
Explanation: Problem decoding audit event
Action: Problem decoding audit event
Name: bau_audit_ev_decode_prob
Number: 0x306541f9 (811942393)
HPDAU0406E Control object %s has no bound
service.
Explanation: Control object should be bound to a
service.
Action: Control object is not bound to a service.
Name: bau_ctrl_obj_not_bound
Number: 0x30654196 (811942294)
Severity: Error
Component: bau / bau_s_msg
HPDAU0500E Cannot bind service %s to control
object
Explanation: A valid control service name is required.
Action: Ensure that a valid control service name is
specified
Name: bau_cannot_bind
Severity: Error
Component: bau / bau_s_service
HPDAZ0100E Unknown message code: %s.
Explanation: The text for the message code could not
be found in the message catalogs installed on the local
system. This typically means that the policy server is at
a more recent level than the client and has returned a
code undefined in the client runtime. The
documentation associated with the policy server
installation should include the message code.
Action: Consult the Error Message Reference to obtain
the message text, explanation, and suggested actions
for the message code.
Name: baz_unknown_msgcode
Number: 0x30659064 (811962468)
Severity: Error
Chapter 1. Tivoli Access Manager Base Messages
53
Component: baz / baz_s_general
HPDAZ0101E The specified configuration or
keystore file already exists.
Explanation: The ’create’ configuration action is
designed to check for existing files and fail if they are
found in order not to overwrite them accidentally.
Action: To preserve existing files, specify new
configuration and keystore file names. To overwrite
existing files, specify the ’replace’ configuration action.
HPDAZ0202E Invalid argument: Null value.
Explanation: A nonnull value object is required when
adding to a PDAttrs object.
Action: Ensure that the value argument is nonnull.
Name: baz_null_value
Number: 0x306590ca (811962570)
Severity: Error
Component: baz / baz_s_attrs
Name: baz_appsvrcfg_file_exists
Number: 0x30659065 (811962469)
Severity: Error
Component: baz / baz_s_general
HPDAZ0102E An unexpected error has occurred.
Explanation: See message.
Action: See the error log for more information. Report
this error to your IBM service representative.
HPDAZ0203E Invalid argument: Null PDAttrs.
Explanation: A nonnull PDAttrs object is required
when adding to a PDAttrs object.
Action: Ensure that the PDAttrs argument is nonnull.
Name: baz_null_pdattrs
Number: 0x306590cb (811962571)
Severity: Error
Component: baz / baz_s_attrs
Name: baz_unexpected_error
Number: 0x30659066 (811962470)
Severity: Fatal
Component: baz / baz_s_general
HPDAZ0200E Invalid argument: Null name.
Explanation: A nonnull name object is required when
adding to a PDAttrs object.
HPDAZ0204E Invalid argument: Null or invalid
QOP value.
Explanation: A valid, nonnull Quality Of Protection
value is required.
Action: Ensure that the QOP argument is nonnull and
is one of the QOP_* constants defined in the PDStatics
class.
Name: bja_invalid_qop
Action: Ensure that the name argument is nonnull.
Number: 0x306590cc (811962572)
Name: baz_null_name
Severity: Error
Number: 0x306590c8 (811962568)
Component: baz / baz_s_attrs
Severity: Error
Component: baz / baz_s_attrs
HPDAZ0201E Invalid argument: Null collection.
Explanation: A nonnull Collection object is required
when adding to a PDAttrs object.
Action: Ensure that the collection argument is nonnull.
Name: baz_null_collection
Number: 0x306590c9 (811962569)
Severity: Error
Component: baz / baz_s_attrs
54
Error Message Reference
HPDAZ0205E Server error: No data was returned.
Explanation: No data was returned by the server. This
usually indicates a server crash. If this reoccurs, contact
IBM service.
Action: Ensure that the Authorization server is up and
rerun this operation.
Name: bja_null_noserverdata
Number: 0x306590cd (811962573)
Severity: Error
Component: baz / baz_s_attrs
HPDAZ0206E Server error: Unexpected tag in data.
Explanation: Unexpected data was returned by the
server. This usually indicates a client/server mismatch.
Action: Ensure that the Java client is current with
(within two releases of) the Access Manager server. If
so, contact IBM service.
Name: bja_baddata_nosequence
Number: 0x306590ce (811962574)
Severity: Error
Component: baz / baz_s_attrs
HPDAZ0210E Server error: Unexpected type of
attrlist: %d.
Explanation: Unexpected data was returned by the
server. This usually indicates a client/server mismatch.
Action: Ensure that the Java client is current with
(within two releases of) the Access Manager server. If
so, contact IBM service.
Name: bja_baddata_wrongtype
Number: 0x306590d2 (811962578)
Severity: Error
Component: baz / baz_s_attrs
HPDAZ0207E Invalid argument: Null name.
Explanation: A nonnull name object is required when
constructing a PDAttr object.
Action: Ensure that the name argument is nonnull.
Name: baz_null_namepdattr
HPDAZ0211E Invalid argument: Collection contains
objects other than PDAttrValue.
Explanation: The constructor only permits
PDAttrValue objects in the Collection.
Number: 0x306590cf (811962575)
Action: Ensure that the input Collection only contains
PDAttrValue.
Severity: Error
Name: bja_invalid_collobjects
Component: baz / baz_s_attrs
Number: 0x306590d3 (811962579)
Severity: Error
HPDAZ0208E Invalid argument: Null value.
Explanation: A nonnull value object is required when
constructing a PDAttr object.
Action: Ensure that the value argument is nonnull.
Name: baz_null_valuepdattr
Number: 0x306590d0 (811962576)
Severity: Error
Component: baz / baz_s_attrs
Component: baz / baz_s_attrs
HPDAZ0212E Invalid argument: Only PDAttrValue
objects can be in this PDAttrValueList.
Explanation: A PDAttrValueList is only for
PDAttrValue objects.
Action: Ensure that the input is a PDAttrValue.
Name: bja_invalid_object
Number: 0x306590d4 (811962580)
HPDAZ0209E Server error: Unexpected number of
values in data: %d.
Explanation: Unexpected data was returned by the
server. This usually indicates a client/server mismatch.
Severity: Error
Component: baz / baz_s_attrs
HPDAZ0213E Invalid argument: Null Collection.
Action: Ensure that the Java client is current with
(within two releases of) the Access Manager server. If
so, contact IBM service.
Explanation: A nonnull Collection object is required
when adding to a PDAttrValueList object.
Name: bja_baddata_toomany
Action: Ensure that the Collection argument is
nonnull.
Number: 0x306590d1 (811962577)
Severity: Error
Component: baz / baz_s_attrs
Name: baz_null_coll2list
Number: 0x306590d5 (811962581)
Severity: Error
Component: baz / baz_s_attrs
Chapter 1. Tivoli Access Manager Base Messages
55
HPDAZ0214E Invalid argument: Null bytes.
Explanation: A nonnull bytes object is required when
constructing a PDBufferAttrValue object.
Action: Ensure that the bytes argument is nonnull.
Name: baz_null_bytes
Number: 0x306590d6 (811962582)
Severity: Error
does not contain the file that you wish to use, then the
login configuration file must specify which URL to use.
Action: Ensure that the URL specified in the login
configuration file is valid.
Name: baz_invalid_URL
Number: 0x3065912d (811962669)
Severity: Error
Component: baz / baz_s_princ
Component: baz / baz_s_attrs
HPDAZ0215E Invalid argument: Null
PDAdmSvcPobj.
Explanation: A nonnull PDAdmSvcPobj object is
required when constructing a PDPobjAttrValue object.
Action: Ensure that the PDAdmSvcPobj argument is
nonnull.
Name: baz_null_pobj
HPDAZ0302E Invalid argument: Could not not
prompt for user information because the
LoginModule was constructed without a
CallbackHandler.
Explanation: To successfully login, user information
must be passed in through a CallbackHandler. If a
PDLoginModule is initialized with a CallbackHandler,
it has no way to obtain that information.
Number: 0x306590d7 (811962583)
Action: Ensure that the login module is initialized
with a CallbackHandler.
Severity: Error
Name: baz_invalid_callback
Component: baz / baz_s_attrs
Number: 0x3065912e (811962670)
Severity: Error
HPDAZ0216E Invalid argument: Null string.
Explanation: A nonnull string object is required when
constructing a PDStringAttrValue object.
Action: Ensure that the string argument is nonnull.
Name: baz_null_string
Number: 0x306590d8 (811962584)
Severity: Error
Component: baz / baz_s_attrs
HPDAZ0300E Invalid argument: Null or empty data
argument.
Component: baz / baz_s_princ
HPDAZ0303E Callback error: The CallbackHandler
(%s) failed to supply user or password
information.
Explanation: To successfully login, user information
must be passed in through a CallbackHandler. The
CallbackHandler that was configured failed to supply
the necessary information to login the user.
Action: Ensure that the configured CallbackHandler is
functioning correctly.
Name: baz_bad_callback
Explanation: A nonnull and nonempty data argument
is required to construct a credential.
Number: 0x3065912f (811962671)
Action: Ensure that the data argument contains
meaningful input.
Component: baz / baz_s_princ
Name: baz_invalid_inputcreds
HPDAZ0304E Authentication error: The Access
Manager authentication attempt failed.
Number: 0x3065912c (811962668)
Severity: Error
Component: baz / baz_s_princ
HPDAZ0301E Invalid argument: Could not use
configuration file at %s.
Explanation: A URL that points to a file that came
from SvrSslCfg is required for a successful login. If the
lib/security directory under the currently-running JVM
56
Error Message Reference
Severity: Error
Explanation: This authentication attempt failed for
reasons outside of its control.
Action: Look for another exception in the log which
would explain why this attempt failed.
Name: baz_fail_authn1
Number: 0x30659130 (811962672)
Severity: Error
Component: baz / baz_s_princ
Number: 0x30659134 (811962676)
Severity: Error
HPDAZ0305E GetCredentials error: The attempt to
get Access Manager credentials failed.
Explanation: This attempt to get credentials failed for
reasons outside of its control.
Action: Look for another exception in the log which
would explain why this attempt failed.
Name: baz_fail_getcreds
Number: 0x30659131 (811962673)
Severity: Error
Component: baz / baz_s_princ
Component: baz / baz_s_princ
HPDAZ0309E Permission error: This Permission
lacks a resource name.
Explanation: PDPermission objects are intended to
describe a resource and a set of permissions.
Action: Ensure that a non-null, non-blank resource
name is passed as the first parameter on the
constructor.
Name: baz_perm_noname
Number: 0x30659135 (811962677)
HPDAZ0306E Authentication error: The Access
Manager authentication attempt failed
because the account is invalid.
Explanation: This account is marked invalid and
cannot be used until it has been marked valid.
Action: Get an administrator to mark the account
valid.
Name: baz_fail_authn2
Number: 0x30659132 (811962674)
Severity: Error
Component: baz / baz_s_princ
HPDAZ0307E Authentication error: The Access
Manager authentication attempt failed
because the password is invalid.
Explanation: The password on this account is marked
invalid and cannot be used until it has been marked
valid.
Action: Get an administrator to mark the password
valid.
Name: baz_fail_authn3
Number: 0x30659133 (811962675)
Severity: Error
Severity: Error
Component: baz / baz_s_princ
HPDAZ0310E Permission error: No Subject in this
context.
Explanation: On a Subject-based permission check, no
Subject could be found in the current context.
Action: Contact IBM service.
Name: baz_perm_nosubject
Number: 0x30659136 (811962678)
Severity: Error
Component: baz / baz_s_princ
HPDAZ0311E Invalid argument: Null subject.
Explanation: On a Subject-based permission check, a
valid Subject object must be supplied by the caller.
Action: Ensure that the subject argument contains
meaningful input.
Name: baz_perm_nosubject2
Number: 0x30659137 (811962679)
Severity: Error
Component: baz / baz_s_princ
Component: baz / baz_s_princ
HPDAZ0308E Authentication error: The Access
Manager authentication attempt failed
because the user (account) name is
invalid.
HPDAZ0312E Invalid argument: Null or empty
name.
Explanation: A nonnull and nonempty principal name
argument is required to perform the operation.
Explanation: Either an incorrect user name was
supplied, or a new account needs to be created on the
Access Manager Policy server.
Action: Ensure that the name argument contains
meaningful input.
Action: Verify that a correct name was passed in.
Number: 0x30659138 (811962680)
Name: baz_fail_authn4
Severity: Error
Name: baz_invalid_inputppalname
Chapter 1. Tivoli Access Manager Base Messages
57
Component: baz / baz_s_princ
Component: baz / baz_s_princ
HPDAZ0313E Invalid argument: Null or empty
credentials.
HPDAZ0317E Invalid argument: Null input
attributes.
Explanation: A nonnull and nonempty creds argument
is required to construct a PDPrincipal.
Explanation: A nonnull attrsIn argument is required
on getEntitlements.
Action: Ensure that the creds argument contains
meaningful input.
Action: Ensure that the attrsIn argument contains
meaningful input.
Name: baz_invalid_inputppalcreds
Name: baz_invalid_inputppalattrs
Number: 0x30659139 (811962681)
Number: 0x3065913d (811962685)
Severity: Error
Severity: Error
Component: baz / baz_s_princ
Component: baz / baz_s_princ
HPDAZ0314E Invalid argument: Null or empty
password argument.
HPDAZ0318E Invalid argument: Unrecognized input
attributes.
Explanation: If a password is supplied, it must be
nonnull and nonempty.
Explanation: The entitlements service on the server
did not recognize something in the attrsIn argument.
Action: Ensure that the password argument contains
meaningful input.
Action: Ensure that the attrsIn argument contains
meaningful input to the service being invoked on
server.
Name: baz_invalid_inputppalpwd
Number: 0x3065913a (811962682)
Severity: Error
Component: baz / baz_s_princ
Name: baz_invalid_inputppalattrs2
Number: 0x3065913e (811962686)
Severity: Error
Component: baz / baz_s_princ
HPDAZ0315E Invalid argument: Could not find
default configuration file at %s.
Explanation: No config URL was supplied on the
PDPrincipal constructor, and no default config file was
found in the lib/security directory under the
currently-running JVM.
Action: Supply a URL that points to a valid
configuration file.
Name: baz_invalid_defURL
Number: 0x3065913b (811962683)
Severity: Error
HPDAZ0319E Invalid argument: Null PDPermission
reference.
Explanation: The implies method requires a
PDPermission to check against the ACL database.
Action: Ensure that the perm argument contains a
nonnull PDPermission reference.
Name: baz_invalid_inputppalperm
Number: 0x3065913f (811962687)
Severity: Error
Component: baz / baz_s_princ
Component: baz / baz_s_princ
HPDAZ0322E Invalid argument: Null login module.
HPDAZ0316E Invalid argument: Null or empty
group names.
Explanation: A nonnull and nonempty groups
argument is required on getGroupMemberships.
Action: Ensure that the groups argument contains
meaningful input.
Name: baz_invalid_inputppalgroups
Number: 0x3065913c (811962684)
Severity: Error
58
Error Message Reference
Explanation: A nonnull login module argument is
required to construct a PDPrincipal.
Action: Ensure that the login module argument
contains meaningful input.
Name: baz_invalid_inputppallm
Number: 0x30659142 (811962690)
Severity: Error
Component: baz / baz_s_princ
HPDAZ0323E There is no login module associated
with the princpal.
HPDAZ0402E Invalid argument: Some nonnull input
needs to be provided.
Explanation: A login module must be associated with
the principal for the function to complete.
Explanation: Nonnull input is required to construct an
AuthSignCertificateCmd.
Action: Ensure that a login module is associated with
the principal.
Action: Ensure that some input is nonnull.
Name: baz_null_login_module
Number: 0x30659143 (811962691)
Severity: Error
Name: baz_invalid_certreqinput
Number: 0x30659192 (811962770)
Severity: Error
Component: baz / baz_s_cmdrsp
Component: baz / baz_s_princ
HPDAZ0324E Permission error: This Permission
lacks an action list.
Explanation: PDPermission objects are intended to
describe a resource and a set of permissions.
Action: Ensure that a non-null, non-blank permission
list is passed as the second parameter on the
constructor.
HPDAZ0403E Transmission error: Parameters could
not be encoded.
Explanation: I/O error occurred even before the
request could be transmitted.
Action: Contact IBM service.
Name: baz_cmd_encodingerr
Number: 0x30659193 (811962771)
Name: baz_perm_noactions
Severity: Error
Number: 0x30659144 (811962692)
Component: baz / baz_s_cmdrsp
Severity: Error
Component: baz / baz_s_princ
HPDAZ0404E Invalid argument: Null accountname
or passphrase.
HPDAZ0400E Invalid argument: Null PDConfig.
Explanation: Nonnull input is required to construct a
ProxyAuthenticateCmd.
Explanation: A nonnull PDConfig object is required to
construct an AuthNCertCmd.
Action: Ensure that the input is nonnull.
Action: Ensure that the config argument is nonnull.
Name: baz_invalid_config
Number: 0x30659190 (811962768)
Severity: Error
Component: baz / baz_s_cmdrsp
HPDAZ0401E Invalid argument: Null accountName
or passphrase or domainName.
Explanation: A nonnull input is required to construct
an AuthNPasswordCmd.
Action: Ensure that the accountName, passphrase and
domainName arguments are nonnull.
Name: baz_invalid_proxyauthinput
Number: 0x30659194 (811962772)
Severity: Error
Component: baz / baz_s_cmdrsp
HPDAZ0405E Invalid argument: Null userName.
Explanation: A userName is required to construct a
ProxyGetCredsCmd.
Action: Ensure that the userName argument contains
meaningful input.
Name: baz_invalid_proxycredsinput
Number: 0x30659195 (811962773)
Name: baz_invalid_pwdinput
Severity: Error
Number: 0x30659191 (811962769)
Component: baz / baz_s_cmdrsp
Severity: Error
Component: baz / baz_s_cmdrsp
HPDAZ0500E Configuration error: This application
server’s account is marked invalid.
Explanation: The Access Manager server indicates that
this server’s account is invalid.
Chapter 1. Tivoli Access Manager Base Messages
59
Action: Ensure that the correct config file is being
used. If it is, ensure that this application server’s
account has not been marked invalid.
HPDAZ0504E Failover error: cannot contact a
configured server.
Name: baz_invalid_account
Explanation: No communication could be made to
any of the configured servers.
Number: 0x306591f4 (811962868)
Severity: Error
Component: baz / baz_s_xport
Action: Ensure that network connectivity exists
between the client and server machines and verify that
the server process is running on the configured port.
Name: baz_no_server
HPDAZ0501E Configuration error: This application
server’s account is unknown.
Number: 0x306591f8 (811962872)
Severity: Error
Explanation: The Access Manager server indicates that
this server’s account is unknown.
Component: baz / baz_s_xport
Action: Ensure that the correct config file is being
used. If it is, ensure that this application server’s
account exists. If it does not, re-run SvrSslCfg.
HPDAZ0600E Invalid argument: Null URL on
constructor.
Name: baz_invalid_cert
Number: 0x306591f5 (811962869)
Severity: Error
Component: baz / baz_s_xport
Explanation: An internal error occurred.
Action: Contact IBM Service.
Name: baz_null_URL
Number: 0x30659258 (811962968)
Severity: Error
HPDAZ0502E Transmission error: No response from
server at %s, port %d.
Component: baz / baz_s_config
Explanation: The Access Manager server did not
respond to this request.
HPDAZ0601E Invalid argument: Could not convert
port number to an integer.
Action: Ensure that the correct config file is being
used, and that the desired server is operational. If all
was correct, contact IBM service.
Explanation: The supplied value was not a valid
integer.
Name: baz_no_answer
Action: Supply a valid integer value for the server
port number.
Number: 0x306591f6 (811962870)
Name: baz_bad_portnumber
Severity: Error
Number: 0x30659259 (811962969)
Component: baz / baz_s_xport
Severity: Error
Component: baz / baz_s_config
HPDAZ0503E Transmission error: Could not connect
to the server, and no alternative servers
are configured.
Explanation: No communication is possible to this
Access Manager server.
Action: Ensure that the correct config file is being
used, and that the desired server is operational. If all
was correct, contact IBM service.
Name: baz_no_session
Number: 0x306591f7 (811962871)
Severity: Error
Component: baz / baz_s_xport
60
Error Message Reference
HPDAZ0602E Corrupted file: Insufficient
information to contact a Policy Server.
Explanation: The configuration file did not correctly
specify a Policy Server servername and port.
Action: Re-run SvrSslCfg to generate a valid
configuration file.
Name: baz_bad_msvrinfo
Number: 0x3065925a (811962970)
Severity: Error
Component: baz / baz_s_config
HPDAZ0603E Corrupted file: Insufficient
information to contact an Authorization
Server.
HPDBA0101E Memory allocate request failed.
Explanation: A request to allocate memory failed.
Action: Re-run SvrSslCfg to generate a valid
configuration file.
Action: Check the amount of system paging and swap
space available as well as the amount of available
memory. You might also consider rebooting the system.
If the problem persists, contact your IBM service
representative.
Name: baz_bad_asvrinfo
Name: bas_s_no_memory
Number: 0x3065925b (811962971)
Number: 0x10652065 (275062885)
Severity: Error
Severity: Fatal
Component: baz / baz_s_config
Component: bas / bas_s_general
HPDAZ0604E Invalid argument: Duplicate server
specified.
HPDBA0107E Unable to map file %s, error (rc=%d).
Explanation: The configuration file did not correctly
specify a Authorization Server servername and port.
Explanation: When trying to add a server to the
configuration file, it was discoverd that the server was
already in the list of servers. Retry without the
duplicate entry.
Explanation: An internal error has occurred.
Action: Retry the command. If the problem persists,
contact your IBM service representative.
Name: bas_s_general_zfilemap
Action: Only supply a server once.
Number: 0x1065206b (275062891)
Name: baz_bad_msvr
Severity: Error
Number: 0x3065925c (811962972)
Component: bas / bas_s_general
Severity: Error
Component: baz / baz_s_config
HPDAZ0605E Corrupted configuration: Cannot use
keystore.
Explanation: The keystore file supposed to be used in
client-server SSL communication could not be opened
with the derived password, or the certificate does not
have the correct alias, or the encrypted password has
been tampered with.
Action: Re-run SvrSslCfg.
HPDBA0108E Unable to unmap file %s, error
(rc=%d).
Explanation: An internal error has occurred.
Action: Retry the command. If the problem persists,
contact your IBM service representative.
Name: bas_s_general_zfileunmap
Number: 0x1065206c (275062892)
Severity: Error
Component: bas / bas_s_general
Name: baz_bad_kstore
Number: 0x3065925d (811962973)
Severity: Error
Component: baz / baz_s_config
HPDBA0100E No data accompanied the server
response to the request.
HPDBA0110I Serviceability messages will not be
recorded in the Tivoli Common
Directory.
Explanation: Tivoli Access Manager has been
configured to use a serviceability scheme that does not
conform to Tivoli Common Directory standard
locations.
Action: Verify the status of the server.
Action: No action is required. Serviceability messages
will be recorded using the legacy Access Manager
serviceability scheme.
Name: bas_s_server_no_data
Name: bas_tcd_non_compliance
Number: 0x10652064 (275062884)
Number: 0x1065206e (275062894)
Severity: Fatal
Severity: Notice
Component: bas / bas_s_general
Component: bas / bas_s_general
Explanation: See message.
Chapter 1. Tivoli Access Manager Base Messages
61
HPDBA0111E The Tivoli Common Directory
configuration file cannot be read.
HPDBA0202E The keyfile is not configured or it
could not be opened or accessed.
Explanation: Tivoli Access Manager was configured to
use the Tivoli Common Directory serviceability scheme;
but the Tivoli Common Directory configuration file
cannot be read.
Explanation: The keyfile does not exist or permissions
prevent the application from reading the keyfile.
Action: Verify that the Tivoli Common Directory
configuration file is located in the correct directory and
that its has proper file access permissions.
Action: Ensure that the keyfile specified by the
″ssl-keyfile″ attribute in the ″ssl″ stanza of the
configuration file exists and that the permissions permit
reading. Verify that it can be viewed using a keyfile
management program.
Name: bas_tcd_missing
Name: mts_keyfile_error
Number: 0x1065206f (275062895)
Number: 0x106520ca (275062986)
Severity: Error
Severity: Fatal
Component: bas / bas_s_general
Component: bas / bas_s_mts
HPDBA0112W Serviceability messages will not be
recorded in the Tivoli Common
Directory.
HPDBA0203E The keyfile password is incorrect.
Explanation: Tivoli Access Manager was configured to
use the Tivoli Common Directory serviceability scheme;
but the Tivoli Common Directory has been relocated
since the configuration was performed.
Action: The location of the Tivoli Common Directory
has been relocated since Tivoli Access Manager was
configured. Move the Tivoli Access Manager
serviceability files into the new location and update the
Tivoli Access Manager configuration to use the correct
directory.
Name: bas_tcd_relocated
Number: 0x10652070 (275062896)
Severity: Warning
Component: bas / bas_s_general
HPDBA0200E The server Distinguished Name (DN)
specified in the configuration file does
not match the DN in the certificate
received from the server.
Explanation: The password stash file does not exist or
its permissions prevent the application from reading it.
Action: Ensure that the file specified by the
″ssl-keyfile-stash″ attribute in the ″ssl″ stanza of the
configuration file exists and is readable.
Name: mts_keyfile_bad_password
Number: 0x106520cb (275062987)
Severity: Fatal
Component: bas / bas_s_mts
HPDBA0204E The specified certificate could not be
used because it does not exist or is
otherwise invalid.
Explanation: The certificate in the keyfile has expired
or the keyfile is invalid.
Action: Ensure that the correct certificate is specified
and that it has not expired.
Name: mts_keyfile_cert_invalid
Number: 0x106520cc (275062988)
Explanation: The DN specified in the ″master-dn″
attribute of the ″manager″ stanza of the configuration
file does not match the DN in the certificate received
from the server.
Severity: Fatal
Action: Verify that the server’s hostname, port
number, and Distinguished Name are correct and that
the correct server certificate is being used.
HPDBA0205E The certificate presented by the SSL
partner could not be successfully
validated.
Name: mts_server_auth_failed
Explanation: The certificate presented by the
application is invalid.
Number: 0x106520c8 (275062984)
Component: bas / bas_s_mts
Severity: Fatal
Action: Ensure that the correct configuration file is
being used by the application.
Component: bas / bas_s_mts
Name: mts_partner_cert_invalid
Number: 0x106520cd (275062989)
62
Error Message Reference
Severity: Fatal
Number: 0x106520d1 (275062993)
Component: bas / bas_s_mts
Severity: Fatal
Component: bas / bas_s_mts
HPDBA0206E The specified SSL V3 session time-out
value is invalid.
Explanation: The configuration file contains an invalid
value.
Action: Specify a valid value (an integer in the range:
10-86400) in the appropriate configuration file for the
attribute (ssl-v3-timeout) or initialization parameter
(azn_init_ssl_timeout). Tivoli Access Manager
components do not operate correctly with small
time-out values in some network environments.
HPDBA0210E The SSL environment could not be
closed.
Explanation: An internal error has occurred.
Action: Retry the command. If the problem persists,
contact your IBM service representative.
Name: mts_env_uninit_error
Number: 0x106520d2 (275062994)
Name: mts_ssl_timeout_invalid
Severity: Fatal
Number: 0x106520ce (275062990)
Component: bas / bas_s_mts
Severity: Fatal
Component: bas / bas_s_mts
HPDBA0211E The SSL attribute could not be set
because the value is invalid.
Explanation: An internal error has occurred.
HPDBA0207E A communication error occurred while
initializing the SSL connection.
Explanation: An internal error has occurred. It might
be caused by a TCP/IP connection problem.
Action: Retry the command. If the problem persists,
contact your IBM service representative.
Name: mts_invalid_value
Action: Retry the command. If the problem persists,
contact your IBM service representative.
Number: 0x106520d3 (275062995)
Name: mts_ssl_init_commo_error
Component: bas / bas_s_mts
Severity: Fatal
Number: 0x106520cf (275062991)
Severity: Fatal
Component: bas / bas_s_mts
HPDBA0212E The SSL environment could not be
initialized. Ensure all required SSL
configuration parameters are correct.
Explanation: The configuration might be corrupted.
HPDBA0208E The requested action cannot be
performed because the SSL environment
is not initialized.
Action: Retry the command. If the problem persists,
unconfigure and reconfigure the application.
Explanation: An internal error has occurred.
Name: mts_env_init_error
Action: Retry the command. If the problem persists,
contact your IBM service representative.
Number: 0x106520d4 (275062996)
Name: mts_env_not_initialized
Component: bas / bas_s_mts
Severity: Fatal
Number: 0x106520d0 (275062992)
Severity: Fatal
Component: bas / bas_s_mts
HPDBA0209E The requested action cannot be
performed because the SSL environment
is already initialized.
Explanation: An internal error has occurred.
HPDBA0213E The WinSock library could not be
loaded.
Explanation: An internal error has occurred.
Action: Ensure that WinSock support is installed and
the library directory is in the PATH then retry the
command. If the problem persists, contact your IBM
service representative.
Name: mts_winsock_load_error
Action: Retry the command. If the problem persists,
contact your IBM service representative.
Number: 0x106520d5 (275062997)
Name: mts_env_already_initialized
Severity: Fatal
Chapter 1. Tivoli Access Manager Base Messages
63
Component: bas / bas_s_mts
HPDBA0214E The SSL socket could not be
initialized. Ensure all required SSL
configuration parameters are correct.
Explanation: The configuration might be corrupted.
Action: Retry the command. If the problem persists,
unconfigure and reconfigure the application.
HPDBA0218E An error occurred writing data to an
SSL connection.
Explanation: An internal error has occurred.
Action: Retry the command. If the problem persists,
contact your IBM service representative.
Name: mts_write_error
Number: 0x106520da (275063002)
Name: mts_soc_init_error
Severity: Fatal
Number: 0x106520d6 (275062998)
Component: bas / bas_s_mts
Severity: Fatal
Component: bas / bas_s_mts
HPDBA0215E Information about the SSL session
could not be determined.
Explanation: An internal error has occurred.
Action: Retry the command. If the problem persists,
contact your IBM service representative.
HPDBA0219E An error occurred reading data from
an SSL connection.
Explanation: An internal error has occurred.
Action: Retry the command. If the problem persists,
contact your IBM service representative.
Name: mts_read_error
Number: 0x106520db (275063003)
Name: mts_session_invalid
Severity: Fatal
Number: 0x106520d7 (275062999)
Component: bas / bas_s_mts
Severity: Fatal
Component: bas / bas_s_mts
HPDBA0216E The SSL session could not be reset.
HPDBA0220E The partner’s SSL certificate
information could not be determined.
Explanation: An internal error has occurred.
Explanation: An internal error has occurred.
Action: Retry the command. If the problem persists,
contact your IBM service representative.
Action: Retry the command. If the problem persists,
contact your IBM service representative.
Name: mts_cert_info_error
Name: mts_session_reset_error
Number: 0x106520d8 (275063000)
Severity: Fatal
Component: bas / bas_s_mts
HPDBA0217E The SSL session type cannot be set to
client on a server.
Explanation: An internal error has occurred.
Action: Retry the command. If the problem persists,
contact your IBM service representative.
Name: mts_ssl_session_type_invalid
Number: 0x106520d9 (275063001)
Severity: Fatal
Component: bas / bas_s_mts
64
Error Message Reference
Number: 0x106520dc (275063004)
Severity: Fatal
Component: bas / bas_s_mts
HPDBA0221E The requested action could not be
performed because the SSL client is
already bound to the server.
Explanation: An internal error has occurred.
Action: Retry the command. If the problem persists,
contact your IBM service representative.
Name: mts_already_bound
Number: 0x106520dd (275063005)
Severity: Fatal
Component: bas / bas_s_mts
HPDBA0222E The TCP/IP host information could
not be determined from the server
hostname. Ensure that the server
hostname is correct.
Explanation: An internal error has occurred.
HPDBA0226I The requested command is not
supported by the server.
Explanation: The command received by the server is
not supported.
Action: Retry the command. If the problem persists,
contact your IBM service representative.
Action: Ensure that the client and server software are
at a compatible level. Update the client or server
software if necessary.
Name: mts_host_not_found
Name: mts_cmd_not_supported
Number: 0x106520de (275063006)
Number: 0x106520e2 (275063010)
Severity: Fatal
Severity: Notice
Component: bas / bas_s_mts
Component: bas / bas_s_mts
HPDBA0223E The SSL communication cannot be
performed because the socket is invalid.
HPDBA0227I The default command handler was
registered for a command it does not
support.
Explanation: An internal error has occurred.
Action: Retry the command. If the problem persists,
contact your IBM service representative.
Explanation: The command received by the server is
no longer supported.
Number: 0x106520df (275063007)
Action: Ensure that the client and server software are
at a compatible level. Update the client or server
software if necessary.
Severity: Fatal
Name: mts_wrong_cmd_handler
Component: bas / bas_s_mts
Number: 0x106520e3 (275063011)
Name: mts_bad_socket
Severity: Notice
HPDBA0224E The specified authentication method is
invalid. Ensure that the specified
authentication method is a supported
value.
Explanation: The configuration file contains an invalid
value.
Action: Correct the authentication method specified in
the configuration file, or unconfigure and reconfigure
the application.
Name: mts_invalid_authn_method
Number: 0x106520e0 (275063008)
Severity: Fatal
Component: bas / bas_s_mts
Component: bas / bas_s_mts
HPDBA0228E The data could not be sent over SSL
because the buffer size was insufficient.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: mts_bad_buffer_size
Number: 0x106520e4 (275063012)
Severity: Fatal
Component: bas / bas_s_mts
HPDBA0229E The certificate or keyfile password is
expired.
HPDBA0225E A configuration action could not be
performed because the SSL server is
already initialized and running.
Explanation: The certificate or the keyfile password is
expired and auto-refresh is not enabled.
Explanation: An internal error has occurred.
Action: Refresh the password or enable auto-refresh in
the configuration file.
Action: Contact your IBM service representative.
Name: mts_already_initialized
Number: 0x106520e1 (275063009)
Severity: Fatal
Name: mts_cert_expired
Number: 0x106520e5 (275063013)
Severity: Fatal
Component: bas / bas_s_mts
Component: bas / bas_s_mts
Chapter 1. Tivoli Access Manager Base Messages
65
HPDBA0230E The certificate label or DN is invalid.
Explanation: An internal error has occurred.
Action: Reconfigure the application. If the problem
persists, contact your IBM service representative.
Name: mts_ssl_socket_closed
Number: 0x106520ea (275063018)
Severity: Fatal
Component: bas / bas_s_mts
Name: mts_cert_label_invalid
Number: 0x106520e6 (275063014)
Severity: Fatal
HPDBA0235I The server lost the client’s
authentication, probably because of
session expiration.
Component: bas / bas_s_mts
Explanation: Suspect the pdmgrd server was stopped
while a client operation was pending.
HPDBA0231E The date for the partner certificate is
invalid.
Action: No Action is required
Explanation: An internal error has occurred.
Action: Reconfigure the application. If the problem
persists, contact your IBM service representative.
Name: mts_partner_cert_date_invalid
Number: 0x106520e7 (275063015)
Severity: Fatal
Name: mts_cmd_lost_authentication
Number: 0x106520eb (275063019)
Severity: Notice
Component: bas / bas_s_mts
HPDBA0236W The server could not locate the
session for the client.
Component: bas / bas_s_mts
Explanation: The client disconnected before the
operation completed.
HPDBA0232E The type of the partner certificate is
unsupported.
Action: No action is required.
Explanation: An internal error has occurred.
Action: Reconfigure the application. If the problem
persists, contact your IBM service representative.
Name: mts_partner_cert_unsupported
Number: 0x106520e8 (275063016)
Severity: Fatal
Component: bas / bas_s_mts
Name: mts_server_missing_session
Number: 0x106520ec (275063020)
Severity: Warning
Component: bas / bas_s_mts
HPDBA0237E The client is not bound. The client
must be bound to perform this
operation.
Explanation: An internal error has occurred.
HPDBA0233E No certificate was presented by the
SSL partner.
Action: If the problem persists, contact your IBM
service representative.
Explanation: An internal error has occurred.
Name: mts_client_needs_bound
Action: Reconfigure the application. If the problem
persists, contact your IBM service representative.
Number: 0x106520ed (275063021)
Name: mts_no_partner_cert
Severity: Fatal
Component: bas / bas_s_mts
Number: 0x106520e9 (275063017)
Severity: Fatal
Component: bas / bas_s_mts
HPDBA0234E The SSL communications could not be
completed. The socket was closed.
HPDBA0238I The certificate has been renewed for
%s.
Explanation: The SSL certificate has been
automatically renewed to prevent its expiration.
Action: No action is required.
Explanation: An internal error has occurred.
Name: mts_client_certificate_renewed
Action: If the problem persists, contact your IBM
service representative.
Number: 0x106520ee (275063022)
66
Error Message Reference
Severity: Notice
Component: bas / bas_s_mts
HPDBA0239I The keyfile password has been
renewed for %s.
Explanation: The keyfile password has been
automatically renewed to prevent its expiration.
HPDBA0245E GSKKM API failed. %s return (%d).
Explanation: An internal error has occurred.
Action: Report this error to your IBM service
representative.
Name: mts_gskkm_api_failed
Action: No action is required.
Number: 0x106520f5 (275063029)
Name: mts_keyfile_password_renewed
Severity: Fatal
Number: 0x106520ef (275063023)
Component: bas / bas_s_mts
Severity: Notice
Component: bas / bas_s_mts
HPDBA0242W The server could not find a handler
for the command: (0x%x).
Explanation: This might indicate that the client or
server should be upgraded.
Action: Ensure that the client and server software are
at a compatible level. Update the client or server
software if necessary.
Name: mts_server_handle_command
HPDBA0246I GSKKM API failed. %s return (%d).
Explanation: This is an informational message. An
error occurred while attempting to refresh the keyfile
password or certificate. The operation will be
automatically retried.
Action: No action is required.
Name: mts_gskkm_api_warning
Number: 0x106520f6 (275063030)
Severity: Notice
Component: bas / bas_s_mts
Number: 0x106520f2 (275063026)
Severity: Warning
HPDBA0249I A GSKIT API failed. %s return (%d).
Component: bas / bas_s_mts
Explanation: An internal error has occurred.
HPDBA0243I Adding handler for command: (0x%x),
rc: (0x%x).
Explanation: Informational message.
Action: No action is required.
Name: mts_server_add_command
Action: Report this error to your IBM service
representative.
Name: mts_gskit_api_failed
Number: 0x106520f9 (275063033)
Severity: Notice
Component: bas / bas_s_mts
Number: 0x106520f3 (275063027)
Severity: Verbose notice
HPDBA0261I The server is listening on port %d.
Component: bas / bas_s_mts
Explanation: This is an informational message.
Action: No action is required.
HPDBA0244I Removing handler for command:
(0x%x), rc: (0x%x).
Explanation: Informational message.
Action: No action is required.
Name: mts_server_remove_command
Number: 0x106520f4 (275063028)
Name: mts_server_start_listening
Number: 0x10652105 (275063045)
Severity: Notice
Component: bas / bas_s_mts
Severity: Verbose notice
HPDBA0262I The server has stopped listening on
port %d.
Component: bas / bas_s_mts
Explanation: This is an informational message.
Action: No action is required.
Name: mts_server_stop_listening
Number: 0x10652106 (275063046)
Chapter 1. Tivoli Access Manager Base Messages
67
Severity: Notice
Component: bas / bas_s_mts
HPDBA0263E Accept failed, errno: (0x%x).
Explanation: An internal error has occurred.
Action: Report this error to your IBM service
representative.
HPDBA0273E The SSL version is invalid. The
specified version is incorrect or
unsupported.
Explanation: The configuration file is corrupted or
contains invalid data.
Action: Unconfigure and reconfigure the application.
Name: mts_invalid_ssl_version
Name: mts_accept_failed
Number: 0x10652111 (275063057)
Number: 0x10652107 (275063047)
Severity: Fatal
Severity: Fatal
Component: bas / bas_s_mts
Component: bas / bas_s_mts
HPDBA0269E The session performing the operation
lost its credentials.
Explanation: This is an internal error.
Action: Report this error to your IBM service
representative.
HPDBA0274E The SSL keyfile stash file name are
invalid.
Explanation: The configuration file is corrupted or
contains invalid data.
Action: Unconfigure and reconfigure the application.
Name: mts_invalid_ssl_keyfile_opener
Name: mts_session_lost_credentials
Number: 0x10652112 (275063058)
Number: 0x1065210d (275063053)
Severity: Fatal
Severity: Fatal
Component: bas / bas_s_mts
Component: bas / bas_s_mts
HPDBA0271I The requested command can not be
run across an unsecured channel.
Explanation: The command cannot be run on an
unsecured channel
Action: No action is required
Name: mts_cmd_not_allowed
Number: 0x1065210f (275063055)
Severity: Notice
Component: bas / bas_s_mts
HPDBA0272E The SSL keyfile name is invalid.
Explanation: The configuration file is corrupted or
contains invalid data.
Action: Unconfigure and reconfigure the application.
Name: mts_invalid_ssl_keyfile
Number: 0x10652110 (275063056)
Severity: Fatal
Component: bas / bas_s_mts
68
Error Message Reference
HPDBA0275E The client is not configured properly
for this call. No replicas have been
specified.
Explanation: The configuration is incomplete.
Action: Use the svrsslcfg -add_replica command to
add appropriate replica authorization servers.
Name: mts_client_empty_gaggle
Number: 0x10652113 (275063059)
Severity: Fatal
Component: bas / bas_s_mts
HPDBA0276E The server name is invalid.
Explanation: The configuration file is corrupted or
contains invalid data.
Action: Unconfigure and reconfigure the application.
Name: mts_invalid_server_name
Number: 0x10652114 (275063060)
Severity: Fatal
Component: bas / bas_s_mts
HPDBA0277E The server port is invalid.
Explanation: The configuration file is corrupted or
contains invalid data.
Number: 0x10652119 (275063065)
Severity: Fatal
Component: bas / bas_s_mts
Action: Unconfigure and reconfigure the application.
Name: mts_invalid_server_port
Number: 0x10652115 (275063061)
Severity: Fatal
Component: bas / bas_s_mts
HPDBA0282E An unknown exception was caught.
No exception information is available.
Explanation: See message.
Action: Report this error to your IBM service
representative.
Name: mts_unknown_exception
HPDBA0278I The non-SSL protocol version is
unsupported.
Explanation: Mismatch between client and server
versions in non-SSL command protocol
Number: 0x1065211a (275063066)
Severity: Fatal
Component: bas / bas_s_mts
Action: Use compatible TAM servers and clients
Name: mts_cmd_non_ssl_version_unsupported_
Number: 0x10652116 (275063062)
Severity: Notice
Component: bas / bas_s_mts
HPDBA0279E A domain must be specified for
authentication.
Explanation: A domain has not been specified prior to
contacting the server.
Action: Ensure a domain is specified in the
configuration file.
HPDBA0283I Automatic refresh of the keyfile
password and certificate cannot be
performed because the keyfile cannot be
opened for reading and writing.
Explanation: The keyfile cannot be opened for reading
and writing.
Action: Ensure that the keyfile and stash file exist and
their permissions allow reading and writing.
Name: mts_keyfile_cant_refresh
Number: 0x1065211b (275063067)
Severity: Notice
Component: bas / bas_s_mts
Name: mts_client_authn_without_domain
Number: 0x10652117 (275063063)
Severity: Fatal
HPDBA0284I The policy server is not able to open
keyfile %s for reading and writing.
Component: bas / bas_s_mts
Explanation: The keyfile cannot be opened for reading
and writing by the policy server process.
HPDBA0280E An invalid Privilege Attribute
Certificate (PAC) was specified.
Action: Ensure that the policy server’s keyfile and
stash file exist and their permissions allow reading and
writing by the policy server.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: mts_client_bad_pac
Number: 0x10652118 (275063064)
Name: mts_signer_cant_sign
Number: 0x1065211c (275063068)
Severity: Notice
Component: bas / bas_s_mts
Severity: Fatal
Component: bas / bas_s_mts
HPDBA0281E An unexpected exception was caught.
Explanation: See message.
Action: See the error log for more information. Report
this error to your IBM service representative.
HPDBA0285E Automatic refresh could not be
performed because of a GSKKM API
error.
Explanation: An internal error has occurred.
Action: Verify that there is enough disk space on the
machine. If the problem persists, contact your IBM
service representative.
Name: mts_pdz_exception
Chapter 1. Tivoli Access Manager Base Messages
69
Name: mts_gskkm_api_error
Name: mts_cert_refresh_error2
Number: 0x1065211d (275063069)
Number: 0x10652121 (275063073)
Severity: Fatal
Severity: Warning
Component: bas / bas_s_mts
Component: bas / bas_s_mts
HPDBA0286W An invalid data packet was received
and discarded.
HPDBA0290I Automatic refresh of the certificate is
being performed. This might take
several minutes.
Explanation: Incoming data is unrecognized.
Action: No action is required.
Name: mts_unknown_data
Number: 0x1065211e (275063070)
Severity: Warning
Component: bas / bas_s_mts
Explanation: The SSL certificate is being renewed.
Action: No action is required.
Name: mts_cert_refresh_try
Number: 0x10652122 (275063074)
Severity: Notice
Component: bas / bas_s_mts
HPDBA0287E Automatic refresh could not be
performed because the certificate has
expired.
Explanation: The certificate has expired and must be
manually refreshed.
Action: Refresh the certificate in the keyfile. For C
applications, use the svrsslcfg command with the
-chgcert option to attempt a manual refresh of the
certificate. For Java applications, use
com.tivoli.pd.jcfg.SvrSslCfg -action replcert.
Name: mts_cert_expired2
Number: 0x1065211f (275063071)
Severity: Fatal
HPDBA0291I Automatic refresh of the keyfile
certificate failed. The signed certificate
could not be obtained from the policy
server because of an error.
Explanation: A communication error occurred when
requesting a signed certificate from the policy server.
Action: Ensure that the policy server is active and
operating correctly.
Name: mts_keyfile_cant_refresh2
Number: 0x10652123 (275063075)
Severity: Notice
Component: bas / bas_s_mts
Component: bas / bas_s_mts
HPDBA0288W Automatic refresh of the certificate
could not be performed because of error
(0x%8.8x).
HPDBA0292E The certificate has expired or the date
is invalid.
Explanation: The date in the certificate is not valid.
Explanation: An internal error has occurred.
Action: Renew the certificate. If the problem persists,
contact your IBM service representative.
Action: The operation will be automatically retried.
No action is required.
Name: mts_cert_date_invalid
Name: mts_cert_refresh_error
Number: 0x10652120 (275063072)
Severity: Warning
Component: bas / bas_s_mts
HPDBA0289W Automatic refresh of the certificate
could not be performed because of error
(0x%8.8x).
Number: 0x10652124 (275063076)
Severity: Fatal
Component: bas / bas_s_mts
HPDBA0293E ICC API failed. %s returns %d, %s
Explanation: An internal error has occurred.
Action: Report this error to your IBM service
representative.
Explanation: An internal error has occurred.
Name: mts_icc_api_failed
Action: The operation will be automatically retried.
No action is required.
Number: 0x10652125 (275063077)
70
Error Message Reference
Severity: Fatal
Component: bas / bas_s_mts
Name: mts_connection_timeout
Number: 0x10652129 (275063081)
HPDBA0294W Could not get ICC context.
Explanation: This is an informational message. An
error occurred while attempting to get icc context.
Action: No action is required.
Name: mts_icc_get_context_failed
Number: 0x10652126 (275063078)
Severity: Warning
Component: bas / bas_s_mts
HPDBA0295W Could not get ICC random number
Explanation: This is an informational message. An
error occurred while attempting to get icc random
number.
Severity: Error
Component: bas / bas_s_mts
HPDBA0298W Certified FIPS mode is not available
on this platform because the underlying
FIPS provider is not currently certified.
Tivoli Access Manager will run in
non-certified FIPS mode.
Explanation: See Message. This is a usually a
temporary condition, and should be aleviated on this
platform in a subsequent version of GSKit.
Action: When available, upgrade to the FIPS certified
version of GSKit for this platform.
Name: mts_fips_not_available
Action: No action is required.
Number: 0x1065212a (275063082)
Name: mts_icc_get_randnum_failed
Severity: Warning
Number: 0x10652127 (275063079)
Component: bas / bas_s_mts
Severity: Warning
Component: bas / bas_s_mts
HPDBA0299I Server is now running in FIPS mode.
Explanation: Informational message.
HPDBA0296E The SSL communications could not be
completed. An incorrectly formatted SSL
message was received from the partner.
Explanation: The FIPS setting might not be the same.
All machines in a secure Tivoli Access Manager
environment must be configured with the same
″ssl-enable-fips″ value.
Action: Ensure that the value for the ″ssl-enable-fips″
entry in the ″[ssl]″ stanza of pd.conf is the same on
both the local machine and the machine where
communication is attempted. If the problem persists,
contact your IBM service representative.
Name: mts_ssl_bad_message
Number: 0x10652128 (275063080)
Severity: Fatal
Component: bas / bas_s_mts
Action: No Action Required
Name: mts_server_in_fips_mode
Number: 0x1065212b (275063083)
Severity: Notice
Component: bas / bas_s_mts
HPDBA0300E Invalid protected object policy name.
Explanation: The protected object policy (POP) name
that was specified is not valid.
Action: Specify a valid POP name. Valid characters are
a-z, A-Z, 0-9, underscore (_), hyphen (-), and backslash
(\) or any character from a double-byte character set.
Name: pop_invalid_name
Number: 0x1065212c (275063084)
Severity: Error
HPDBA0297E Timeout expired. The timeout period
elapsed prior to obtaining a connection
from the client to the server.
Explanation: See Message.
Action: Increase the value of the ’ssl-client-connectiontimeout’ entry in the [ssl] stanza of the
’etc/ivmgrd.conf’ file in the Tivoli Access Manager
install directory. And ensure server is running and
listening.
Component: bas / bas_s_pop
HPDBA0301E The protected object policy specified
was not found.
Explanation: See message.
Action: Retry the command with a valid protected
object policy name.
Name: pop_not_found
Chapter 1. Tivoli Access Manager Base Messages
71
Number: 0x1065212d (275063085)
Severity: Error
Component: bas / bas_s_pop
HPDBA0302E Policy is attached to one or more
protected objects. A policy cannot be
deleted while it is still attached.
Explanation: See message.
Action: Detach the policy from all protected objects
and retry the command.
Explanation: The creator or administrator of the
specified protected object has set the attributes of the
protected object such that no policy can be attached.
Action: The administator of the specified protected
object must change the attributes of the protected object
before a policy can be attached.
Name: acl_not_attachable
Number: 0x10652132 (275063090)
Severity: Error
Component: bas / bas_s_pop
Name: pop_cant_delete_attached
Number: 0x1065212e (275063086)
Severity: Error
Component: bas / bas_s_pop
HPDBA0303E A protected object policy with this
name already exists.
Explanation: An attempt was made to create a new
protected object policy. A protected object policy by the
same name already exists.
Action: Determine if this conflict needs to be resolved
and take action accordingly.
HPDBA0308E Invalid authorization rule name.
Explanation: The rule name that was specified is not
valid.
Action: Specify a valid authorization rule name. Valid
characters are a-z, A-Z, 0-9, underscore (_), hyphen (-),
and backslash (\) or any character from a double-byte
character set.
Name: rule_invalid_name
Number: 0x10652134 (275063092)
Severity: Error
Component: bas / bas_s_pop
Name: pop_already_exists
Number: 0x1065212f (275063087)
Severity: Error
Component: bas / bas_s_pop
HPDBA0305E The protected object policy cannot be
attached to the specified protected
object. The protected object has been
marked to not accept the protected
object policy.
Explanation: The creator or administrator of the
specified protected object has set the attributes of the
protected object such that no policy can be attached.
Action: The administator of the specified protected
object must change the attributes of the protected object
before a policy can be attached.
Name: pop_not_attachable
Number: 0x10652131 (275063089)
Severity: Error
Component: bas / bas_s_pop
HPDBA0306E The ACL cannot be attached to the
specified protected object. The protected
object has been marked to not accept
the ACL policy.
72
Error Message Reference
HPDBA0309E Invalid authorization rule text string.
Explanation: The rule text string that was specified is
not valid.
Action: Specify a valid authorization rule test string.
Valid characters are a-z, A-Z, 0-9, underscore (_),
hyphen (-), and backslash (\) or any character from a
double-byte character set.
Name: rule_invalid_rule_text
Number: 0x10652135 (275063093)
Severity: Error
Component: bas / bas_s_pop
HPDBA0310E The authorization rule specified was
not found.
Explanation: See message.
Action: Specify the correct rule and retry the
command.
Name: rule_not_found
Number: 0x10652136 (275063094)
Severity: Error
Component: bas / bas_s_pop
HPDBA0311E An authorization rule with this name
already exists.
Explanation: An attempt was made to create a new
authorization rule. An authorization rule by the same
name already exists.
Action: Determine if this conflict needs to be resolved
and take action accordingly.
Name: rule_already_exists
Number: 0x10652137 (275063095)
Severity: Error
Component: bas / bas_s_pop
Number: 0x10652191 (275063185)
Severity: Fatal
Component: bas / bas_s_asn
HPDBA0406E ASN.1 decoding error. The version of
ASN.1 encoded data was unexpected.
The most likely cause is that the sender
is at different version.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: bas_s_asn_version_error
Number: 0x10652196 (275063190)
HPDBA0312E The authorization rule cannot be
attached to the specified protected
object. The protected object has been
marked to not accept protected object
policies.
Explanation: The creator or administrator of the
specified protected object has set the attributes of the
protected object so that no authorization rule can be
attached.
Action: The administator of the specified protected
object must change the attributes of the protected object
such that authorization rule will be accepted.
Name: rule_not_attachable
Number: 0x10652138 (275063096)
Severity: Error
Component: bas / bas_s_pop
Severity: Fatal
Component: bas / bas_s_asn
HPDBA0407E ASN.1 general error. Unsupported
operation.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: bas_s_asn_error
Number: 0x10652197 (275063191)
Severity: Fatal
Component: bas / bas_s_asn
HPDBA0408E The ASN.1 data stream ended
prematurely.
Explanation: An internal error has occurred.
HPDBA0313E The authorization rule is attached to
one or more protected objects. The
authorization rule cannot be deleted
while it is still attached
Action: Contact your IBM service representative.
Explanation: See message.
Severity: Fatal
Action: Use the authzrule find command to get a list
of the protected objects that are attached to the rule.
Detach all protected objects from the authorization rule
then retry the command.
Component: bas / bas_s_asn
Name: rule_cant_delete_attached
Explanation: An internal error has occurred.
Number: 0x10652139 (275063097)
Action: Contact your IBM service representative.
Severity: Error
Name: bas_s_asn_value_overflow
Component: bas / bas_s_pop
Number: 0x10652199 (275063193)
Name: bas_s_asn_no_more_data
Number: 0x10652198 (275063192)
HPDBA0409E An ASN.1 integer value is too large.
Severity: Fatal
HPDBA0401E ASN.1 encoding error (0x%8.8lx).
Component: bas / bas_s_asn
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: bas_s_asn_encode
Chapter 1. Tivoli Access Manager Base Messages
73
HPDBA0410E ASN.1 data length is invalid. The data
buffer is invalid.
Severity: Fatal
Component: bas / bas_s_asn
Explanation: An internal error has occurred.
Name: bas_s_asn_invalid_length
HPDBA0415E The ASN.1 type must be constructed.
The data buffer contains unexpected
data.
Number: 0x1065219a (275063194)
Explanation: An internal error has occurred.
Severity: Fatal
Action: Contact your IBM service representative.
Component: bas / bas_s_asn
Name: bas_s_asn_must_be_constructed
Action: Contact your IBM service representative.
Number: 0x1065219f (275063199)
HPDBA0411E ASN.1 data invalid encoding. The data
buffer contains unexpected data.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Severity: Fatal
Component: bas / bas_s_asn
Name: bas_s_asn_invalid_encoding
HPDBA0416E An ASN.1 data value is not set. The
data buffer contains unexpected data.
Number: 0x1065219b (275063195)
Explanation: An internal error has occurred.
Severity: Fatal
Action: Contact your IBM service representative.
Component: bas / bas_s_asn
Name: bas_s_asn_value_not_set
Number: 0x106521a0 (275063200)
HPDBA0412E ASN.1 data invalid parameter.
Explanation: An internal error has occurred.
Severity: Fatal
Component: bas / bas_s_asn
Action: Contact your IBM service representative.
Name: bas_s_asn_invalid_parameter
Number: 0x1065219c (275063196)
Severity: Fatal
Component: bas / bas_s_asn
HPDBA0413E ASN.1 indefinite data type is not
allowed. The data buffer contains
unexpected data.
Explanation: An internal error has occurred.
HPDBA0417E The ASN.1 indefinite data type is not
supported. The data buffer contains
unexpected data.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: bas_s_asn_indefinite_unsupported
Number: 0x106521a1 (275063201)
Severity: Fatal
Component: bas / bas_s_asn
Action: Contact your IBM service representative.
Name: bas_s_asn_indefinite_not_allowed
Number: 0x1065219d (275063197)
Severity: Fatal
Component: bas / bas_s_asn
HPDBA0414E The ASN.1 data type must be
primitive. The data buffer contains
unexpected data.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: bas_s_asn_must_be_primitive
Number: 0x1065219e (275063198)
74
Error Message Reference
HPDBA0418E The unused bitcount is invalid for the
ASN.1 bitstream type. The data buffer
contains unexpected data.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: bas_s_asn_bad_unused_bitcount
Number: 0x106521a2 (275063202)
Severity: Fatal
Component: bas / bas_s_asn
HPDBA0419E The segmented bitcount is invalid for
the ASN.1 bitstream type. The data
buffer contains unexpected data.
Explanation: An internal error has occurred.
Name: bas_s_asn_selection_out_of_range
Number: 0x106521a7 (275063207)
Severity: Fatal
Component: bas / bas_s_asn
Action: Contact your IBM service representative.
Name: bas_s_asn_segmented_bitcount_error
Number: 0x106521a3 (275063203)
Severity: Fatal
Component: bas / bas_s_asn
HPDBA0424E The ASN.1 choice data type is not
initialized.
Explanation: An internal error has occurred. An
attempt was made to set a value to an unselected
choice.
Action: Contact your IBM service representative.
HPDBA0420E An unexpected ASN.1 data type was
found. The data buffer contains
unexpected data.
Name: bas_s_asn_no_selection
Number: 0x106521a8 (275063208)
Explanation: An internal error has occurred.
Severity: Fatal
Action: Contact your IBM service representative.
Component: bas / bas_s_asn
Name: bas_s_asn_wrong_type
Number: 0x106521a4 (275063204)
Severity: Fatal
Component: bas / bas_s_asn
HPDBA0421E The ASN.1 data buffer is too long.
The data buffer contains unexpected
data.
Explanation: An internal error has occurred.
HPDBA0425E The ASN.1 asn_any data type has
specific syntax.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: bas_s_asn_specific_syntax_established_
Number: 0x106521a9 (275063209)
Severity: Fatal
Component: bas / bas_s_asn
Action: Contact your IBM service representative.
Name: bas_s_asn_unconsumed_data
Number: 0x106521a5 (275063205)
Severity: Fatal
Component: bas / bas_s_asn
HPDBA0426E The ASN.1 utc/gmt time type has an
invalid value.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: bas_s_asn_invalid_value
HPDBA0422E The ASN.1 data stream is missing
members of a sorted set. The data buffer
contains unexpected data.
Number: 0x106521aa (275063210)
Explanation: An internal error has occurred.
Component: bas / bas_s_asn
Action: Contact your IBM service representative.
Name: bas_s_asn_elements_missing
Number: 0x106521a6 (275063206)
Severity: Fatal
Component: bas / bas_s_asn
Severity: Fatal
HPDBA0427E The ASN.1 UTF-8 string could not
convert the string to or from the local
code page.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: bas_s_asn_cant_convert
HPDBA0423E The ASN.1 choice index is out of
range.
Explanation: An internal error has occurred.
Number: 0x106521ab (275063211)
Severity: Fatal
Component: bas / bas_s_asn
Action: Contact your IBM service representative.
Chapter 1. Tivoli Access Manager Base Messages
75
HPDBA0428E The specified codeset is not permitted
for this ASN.1 data type.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: bas_s_asn_codeset_not_permitted
Number: 0x106521ac (275063212)
Severity: Fatal
Component: bas / bas_s_asn
HPDBA0602E Keyfile password change failed
because permissions on the file are not
correct. File: %s.
Explanation: An error occurred while changing the
password for the specified key file. The file permissions
are incorrect, or the owner is incorrect.
Action: Ensure that the owner of the file matches the
identity of the application. Ensure that the identity has
permission to create and write the file. Then change the
password manually using the -chgpwd option.
Name: mts_keyfile_password_change_ failed_fileaccess
HPDBA0521I Successful completion
Number: 0x1065225a (275063386)
Explanation: The operation was performed
successfully.
Severity: Error
Action: No action is required.
Name: msg_s_ok_text
Number: 0x10652209 (275063305)
Severity: Varies
Component: bas / bas_s_mts
HPDBA0603E Keyfile password change failed
because GSKit could not change the
password. File: %s. Error: %d
Component: bas
Explanation: An unexpected error occurred while
changing the password for the specified key file. GSKit
change key password returned an error.
HPDBA0600E Keyfile password change failed. File:
%s. Error: %d
Action: The key file or stash file may be corrupted.
Explanation: An unexpected error occurred while
changing the password for the specified key file.
Action: Change the password manually using the
-chgpwd option. If the problem persists, contact your
IBM service representative.
Name: mts_keyfile_password_change_
failed_keydbpwd
Number: 0x1065225b (275063387)
Severity: Error
Component: bas / bas_s_mts
Name: mts_keyfile_password_change_failed
Number: 0x10652258 (275063384)
Severity: Error
HPDBA0604E Keyfile password change rollback
failed. GSKit reports an error. File: %s.
Error: %d
Component: bas / bas_s_mts
Explanation: An error occurred while attempting to
restore the password for the specified key file.
HPDBA0601E Keyfile password change failed
because GSKit could not resolve the
stash file. File: %s. Error: %d
Action: The key file or stash file may be missing or
corrupted.
Explanation: An error occurred while changing the
password for the specified key file. The key stash file is
missing.
Number: 0x1065225c (275063388)
Action: The stash file may be missing or corrupted.
Attempt to locate the stash file for the specified key
file.
Name: mts_keyfile_password_change_
failed_nostashfile
Number: 0x10652259 (275063385)
Severity: Error
Component: bas / bas_s_mts
76
Error Message Reference
Name: mts_keyfile_password_change_ failed_rollback
Severity: Error
Component: bas / bas_s_mts
HPDBA0605W Warning mode is enabled for this
protected object policy (POP). Complete
access to the protected object using this
POP is permitted regardless of other
restrictions in the POP.
Explanation: When the warning mode attribute for the
POP is set to yes, any user can perform any action on
the object where the POP is attached. Any access to the
object is permitted even if the security policy attached
to the object is set to deny this access. This message is a
precautionary warning to safeguard that this is the
desired behavior.
Severity: Error
Component: bcf / bcf_cfg_jrte
Action: If unrestricted access is desired to the object
where the POP is attached, no action is required. To
enable restrictions in the POP, modify the POP by
setting the value of the warning mode attribute to no.
HPDBF0025E Unable to create the PD.properties file
in the specified JRE. Ensure you have
the correct permissions to do so.
Name: pop_warning_mode_on2
Explanation: Unable to create PD.properties file in
PolicyDirector directory of the JRE being configured.
Number: 0x1065225d (275063389)
Severity: Warning
Component: bas / bas_s_pop
HPDBF0020E The specified JRE (%s) version (%s)
does not meet supported JRE version
requirement. Consult the manual for a
list of supported JREs.
Explanation: See message.
Action: Install a supported JRE and retry the
command.
Name: bcf_jrte_jvm_unsupported
Number: 0x30695014 (812208148)
Action: Ensure that the user has the necessary
permissions to create the PolicyDirector directory and
the PD.properties file in the <JRE_HOME>/
PolicyDirector directory.
Name: bcf_jrte_create_pdprops_fail
Number: 0x30695019 (812208153)
Severity: Error
Component: bcf / bcf_cfg_jrte
HPDBF0026W Unable to rename the PD.properties
file.
Explanation: See message.
Severity: Error
Action: Ensure the permissions on the file allow this
process to modify it.
Component: bcf / bcf_cfg_general
Name: bcf_jrte_rename_pdprops_fail
Number: 0x3069501a (812208154)
HPDBF0021E This Java Runtime Environment (%s)
has already been configured.
Unconfigure first then retry the
command.
Severity: Warning
Component: bcf / bcf_cfg_jrte
Explanation: The specified JRE is already configured
and cannot be configured twice.
HPDBF0027E An error occurred while creating
PD.properties file.
Action: Unconfigure JRE if you would like to
configure again.
Explanation: Unable to create PD.properties file in
PolicyDirector directory of the JRE being configured.
Name: bcf_jrte_jvm_already_configured
Severity: Error
Action: Ensure that the user has the necessary
permissions to create the PolicyDirector directory and
the PD.properties file in the <JRE_HOME>/
PolicyDirector directory.
Component: bcf / bcf_cfg_jrte
Name: bcf_jrte_create_pdprops_problems
Number: 0x30695015 (812208149)
Number: 0x3069501b (812208155)
HPDBF0022E This Java Runtime Environment (%s)
has already been configured.
Unconfigure first or specify a different
JRE path then retry the command.
Severity: Error
Component: bcf / bcf_cfg_jrte
Explanation: The specified JRE is already configured
and cannot be configured twice.
HPDBF0029E No JRE has been configured. Unable to
unconfigure %s.
Action: Unconfigure JRE if you would like to
configure again or specify a different JRE path.
Explanation: pdjrte_paths file does not exist. As such,
no JREs have been configured already.
Name: bcf_jrte_jvm_configured
Action: Configure a JRE. Or, if a JRE is already
configured and this message is still displayed, create
Number: 0x30695016 (812208150)
Chapter 1. Tivoli Access Manager Base Messages
77
the <PDHOME>/etc/pdjrte_paths file w/ the JRE path
listed.
Name: bcf_jrte_nonexistent_pdjrtepaths
Number: 0x30695047 (812208199)
Severity: Notice
Component: bcf / bcf_cfg_pdwpm
Number: 0x3069501d (812208157)
Severity: Error
Component: bcf / bcf_cfg_jrte
HPDBF0030W The JRE (%s) is not configured for the
Tivoli Access Manager Runtime for
Java.
Explanation: See message.
Action: Configure the JRE for the Tivoli Access
Manager Runtime for Java.
Name: bcf_jrte_jvm_neverconfigured
Number: 0x3069501e (812208158)
Severity: Warning
Component: bcf / bcf_cfg_jrte
HPDBF0031E This Java Runtime Environment has
already been configured.
Explanation: The JRE specified is already listed in the
pdjrte_paths file.
Action: Unconfigure this JRE before trying to
configure.
Name: bcf_jrte_jvm_alreadyconfigured
Number: 0x3069501f (812208159)
Severity: Error
HPDBF0073W Unable to stop IBM WebSphere
Application Server.
Explanation: The server could not be stopped.
Perhaps it was not running.
Action: No action required.
Name: bcf_pdwpm_unable_stop_was
Number: 0x30695049 (812208201)
Severity: Warning
Component: bcf / bcf_cfg_pdwpm
HPDBF0075W Unable to Regenerate IBM
WebSphere Application Server Plugin
Configuration.
Explanation: The plugin configuration could not be
regenerated. Perhaps the server name is not the default
server1
Action: From the command line, run the command
GenPluginCfg -server.name <servername> where
servername is the name of your IBM WebSphere
Application Server.
Name: bcf_pdwpm_unable_generate_plugin
Number: 0x3069504b (812208203)
Severity: Warning
Component: bcf / bcf_cfg_pdwpm
Component: bcf / bcf_cfg_jrte
HPDBF0032E There was an internal error during
initialization.
HPDBF0078W Unable to start IBM WebSphere
Application Server.
Explanation: See message.
Explanation: The command to start the server failed.
Perhaps it is already running.
Action: Make sure the CLASSPATH is set correctly.
Action: No action is required.
Name: bcf_jrte_internal_error
Name: bcf_pdwpm_unable_start_was
Number: 0x30695020 (812208160)
Number: 0x3069504e (812208206)
Severity: Error
Severity: Warning
Component: bcf / bcf_cfg_jrte
Component: bcf / bcf_cfg_pdwpm
HPDBF0071I Unable to locate IBM WebSphere
Application Server installation path.
HPDBF0080E
Explanation: Cannot get the installation path from the
vpd.properties.
Explanation: An error occurred during the installation
of the product.
Action: Ensure IBM WebSphere Application Server is
installed and running.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: bcf_pdwpm_unable_locate_wpm
78
Error Message Reference
Unable to deploy Tivoli Access
Manager Web Portal Manager.
Name: bcf_pdwpm_install_error
Action: Install a supported version of WebSphere.
Number: 0x30695050 (812208208)
Name: bcf_pdwpm_invalid_waspath
Severity: Error
Number: 0x30695056 (812208214)
Component: bcf / bcf_cfg_pdwpm
Severity: Error
Component: bcf / bcf_cfg_pdwpm
HPDBF0083E
The Tivoli Access Manager runtime
must be configured first.
HPDBF0087E
Explanation: See message.
Action: Configure the Tivoli Access Manager rutime
before configuring Web Portal Manager.
The Tivoli Access Manager Web Portal
Manager has already been configured.
Explanation: See message.
Name: bcf_pdrte_config_error
Action: Unconfigure the Tivoli Access Manager Web
Portal Manager first, then retry the command.
Number: 0x30695053 (812208211)
Name: bcf_pdwpm_already_cfg
Severity: Error
Number: 0x30695057 (812208215)
Component: bcf / bcf_cfg_pdwpm
Severity: Error
Component: bcf / bcf_cfg_pdwpm
HPDBF0084E
Unable to perform SvrSslCfg
configuration for Tivoli Access Manager
Web Portal Manager.
HPDBF0088E
Explanation: See message.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: bcf_pdwpm_svrcfg_error
Number: 0x30695054 (812208212)
Severity: Error
Component: bcf / bcf_cfg_pdwpm
HPDBF0085E
Unable to find the TAMWPM.ear
directory. Make sure that the TAMWPM
application is deployed in the
WebSphere installedApps directory.
Explanation: See message.
Action: See message
Name: bcf_pdwpm_tamear_error
Number: 0x30695055 (812208213)
Severity: Error
Component: bcf / bcf_cfg_pdwpm
HPDBF0086E
The WebSphere server installation full
path is not valid. Possible causes are:
\tMake sure you have installed a
supported version of WebSphere.
\tMake sure you have configured Tivoli
Access Manager Runtime for Java \tto
this WebSphere Java path.
Explanation: The path specified for WebSphere is not
valid.
The Tivoli Access Manager Web Portal
Manager has already been
unconfigured.
Explanation: See message.
Action: No action required.
Name: bcf_pdwpm_already_uncfg
Number: 0x30695058 (812208216)
Severity: Error
Component: bcf / bcf_cfg_pdwpm
HPDBF0089E
Unable to configure Tivoli Access
Manager Runtime for Java into the IBM
WebSphere Application Server.
Explanation: An internal error has occurred.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: bcf_pdwpm_jrtecfg_error
Number: 0x30695059 (812208217)
Severity: Error
Component: bcf / bcf_cfg_pdwpm
HPDBF0091E
Tivoli Access Manager Web Portal
Manager could not be removed from
WebSphere. Continuing with the
unconfig operation.
Explanation: An internal error occurred during the
uninstall process.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
Chapter 1. Tivoli Access Manager Base Messages
79
problem and then retry the command. Use the
WebSphere Admin Console to remove the Tivoli Access
Manager Web Portal Manager.
Name: bcf_pdwpm_uninstall_error
Number: 0x3069505b (812208219)
Severity: Error
Component: bcf / bcf_cfg_pdwpm
HPDBF0094E
Unable to unconfigure Tivoli Access
Manager Runtime for Java from IBM
WebSphere Application Server.
Explanation: See message.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: bcf_pdwpm_jrteuncfg_error
Number: 0x3069505e (812208222)
HPDBF0098E
The Windows registry could not be
opened.
Explanation: The API that is used to manipulate the
registry failed.
Action: Ensure you are using a supported operating
system. Refer to previous messages that have appeared
on the screen for more details. Fix the problem and
then retry the command.
Name: bcf_pdwpm_win32_registry_open_ error
Number: 0x30695062 (812208226)
Severity: Error
Component: bcf / bcf_cfg_pdwpm
HPDBF0099E
The registry key value could not be
set.
Explanation: The API that is used to manipulate the
registry failed.
Component: bcf / bcf_cfg_pdwpm
Action: Ensure you are using a supported operating
system. Refer to previous messages that have appeared
on the screen for more details. Fix the problem and
then retry the command.
HPDBF0095E
Name: bcf_pdwpm_win32_registry_set_error
Severity: Error
The SvrSslCfg unconfiguration
command cannot be performed for
Tivoli Access Manager Web Portal
Manager.
Explanation: See message.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: bcf_pdwpm_svruncfg_error
Number: 0x3069505f (812208223)
Number: 0x30695063 (812208227)
Severity: Error
Component: bcf / bcf_cfg_pdwpm
HPDBF0100E
The IBM HTTP server installation
path could not be obtained.
Explanation: See message.
Severity: Error
Action: Ensure that IBM HTTP server is properly
installed.
Component: bcf / bcf_cfg_pdwpm
Name: bcf_pdwpm_unable_locate_httpd
Number: 0x30695064 (812208228)
HPDBF0097E
IBM WebSphere Application Server
plug-in configuration could not be
regenerated.
Severity: Error
Component: bcf / bcf_cfg_pdwpm
Explanation: An internal error occurred.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: bcf_pdwpm_regenerate_plugin_error
Number: 0x30695061 (812208225)
Severity: Error
Component: bcf / bcf_cfg_pdwpm
HPDBF0101E
The httpd.conf file could not be
modified. SSL is not available for
connecting to Tivoli Access Manager
Web Portal Manager.
Explanation: Unable to access the configuration file
for the IBM HTTP server. SSL will not function
properly.
Action: Check the file permissions and path. Ensure
the file is not locked by another process.
Name: bcf_pdwpm_ssl_disabled
Number: 0x30695065 (812208229)
80
Error Message Reference
Severity: Error
Severity: Error
Component: bcf / bcf_cfg_pdwpm
Component: bcf / bcf_cfg_pdwpm
HPDBF0102E
HPDBF0122E The value specified for -action option
(%s) was not valid. The value must be
one of the following:
config|unconfig|status|name
The pdwpm.conf file could not be
modified.
Explanation: Unable to access the configuration file
for Tivoli Access Manager Web Portal Manager.
Action: Check the file permissions and path. Ensure
the file is not locked by another process.
Name: bcf_pdwpm_unable_editconf
Number: 0x30695066 (812208230)
Severity: Error
Component: bcf / bcf_cfg_pdwpm
Explanation: See message.
Action: Specify a correct value for the -action option.
Retry the command.
Name: bcf_pdwpm_invalidaction
Number: 0x3069507a (812208250)
Severity: Error
Component: bcf / bcf_cfg_pdwpm
HPDBF0116E
The port number is not valid. The
port must be an integer greater than or
equal to zero.
Explanation: See message.
Action: Retry the command with a valid port number.
Name: bcf_pdwpm_port
Number: 0x30695074 (812208244)
Severity: Error
Component: bcf / bcf_cfg_pdwpm
HPDBF0153E An error occurred backing up the data.
Explanation: See message.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: pdbackup_error_backup
Number: 0x30695099 (812208281)
Severity: Error
Component: bcf / bcf_cfg_pdbackup
HPDBF0119E The local host name cannot be
obtained. Specify the host name using
the - policysvr option.
Explanation: See message.
Action: Specify a value for -policysvr option, and retry
the command.
Name: bcf_pdwpm_cantgethost
Number: 0x30695077 (812208247)
Severity: Error
Component: bcf / bcf_cfg_pdwpm
HPDBF0154E An error occurred restoring the archive.
Explanation: An error occurred during the restoration
process.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: pdbackup_error_restore
Number: 0x3069509a (812208282)
Severity: Error
Component: bcf / bcf_cfg_pdbackup
HPDBF0120E Could not contact the Tivoli Access
Manager policy server. Possible causes
are: The Policy server is not running.
The Policy server host name or port
number is incorrect.
Explanation: See message.
Action: Make sure the policy server is running and
specify a correct value for host name and port number,
and retry the command.
Name: bcf_pdwpm_cantgethostport
Number: 0x30695078 (812208248)
HPDBF0155E Could not resolve path for Tivoli
Access Manager runtime.
Explanation: The Tivoli Access Manager runtime path
could not be obtained from the registry.
Action: Ensure Tivoli Access Manager runtime is
installed on the system.
Name: pdbackup_cant_get_pdrte_path
Number: 0x3069509b (812208283)
Severity: Error
Chapter 1. Tivoli Access Manager Base Messages
81
Component: bcf / bcf_cfg_pdbackup
HPDBF0156E Could not parse the line: %s.
Explanation: The line in the backup list is misformed.
Action: Correct the line and retry the command.
Name: pdbackup_cant_parse_conf
Number: 0x3069509c (812208284)
Severity: Error
HPDBF0160E Could not open file: %s
Explanation: The specified file could not be opened.
Action: Check the path, name, and permissions of the
file and retry the command.
Name: pdbackup_cant_open_file
Number: 0x306950a0 (812208288)
Severity: Error
Component: bcf / bcf_cfg_pdbackup
Component: bcf / bcf_cfg_pdbackup
HPDBF0161E Could not access list: %s
HPDBF0157E Could not backup the registry subkey:
%s.
Explanation: The backup list could not be accessed.
Explanation: The registry subkey could not be saved.
Action: Check the path, name, and permissions of the
file and retry the command.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: pdbackup_list_error
Number: 0x306950a1 (812208289)
Name: pdbackup_cant_backup_registry
Severity: Error
Number: 0x3069509d (812208285)
Component: bcf / bcf_cfg_pdbackup
Severity: Error
Component: bcf / bcf_cfg_pdbackup
HPDBF0158E Could not restore the registry subkey:
%s.
Explanation: The registry subkey could not be
restored.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: pdbackup_cant_restore_registry
Number: 0x3069509e (812208286)
Severity: Error
Component: bcf / bcf_cfg_pdbackup
HPDBF0159E Could not copy %s to %s.
Explanation: An error occurred copying the file.
Action: Check the paths and permissions of the
directories.
HPDBF0162E The drive %s is not a fixed drive.
Explanation: The drive specified must be a fixed drive
for the restore to occur.
Action: Specify the correct drive letter and retry the
command.
Name: pdbackup_no_fixed_drive
Number: 0x306950a2 (812208290)
Severity: Error
Component: bcf / bcf_cfg_pdbackup
HPDBF0163E Could not access the path: %s
Explanation: The path specified does not exist.
Action: Check the path and retry the command.
Name: pdbackup_invalid_path
Number: 0x306950a3 (812208291)
Severity: Error
Component: bcf / bcf_cfg_pdbackup
Name: pdbackup_copy_error
Number: 0x3069509f (812208287)
Severity: Error
Component: bcf / bcf_cfg_pdbackup
HPDBF0169E Could not open file: %s
Explanation: The specified file could not be opened.
Action: Check the path, name, and permissions of the
file and retry the command.
Name: pdversion_cant_open_file
Number: 0x306950a9 (812208297)
Severity: Error
82
Error Message Reference
Component: bcf / bcf_cfg_pdversion
HPDBF0171E Could not resolve path for Tivoli
Access Manager runtime.
Explanation: The Tivoli Access Manager runtime path
could not be obtained from the registry.
Action: Ensure Tivoli Access Manager runtime is
installed on the system.
HPDBF0230E
The port number is invalid. The port
must be an integer greater than or equal
to zero.
Explanation: See message.
Action: Retry the command with a valid port number.
Name: bcf_svrsslcfg_port
Number: 0x306950e6 (812208358)
Name: pdversion_cant_get_pdrte_path
Severity: Error
Number: 0x306950ab (812208299)
Component: bcf / bcf_cfg_svrsslcfg
Severity: Error
Component: bcf / bcf_cfg_pdversion
HPDBF0172E The file, %s, could not be read.
Explanation: See message.
Action: Check the file’s permissions and path and
retry the command.
HPDBF0231E
The rank is invalid. The rank must be
an integer.
Explanation: See message.
Action: Retry the command with a valid rank.
Name: bcf_svrsslcfg_rank
Number: 0x306950e7 (812208359)
Name: pdversion_cant_read_error
Severity: Error
Number: 0x306950ac (812208300)
Component: bcf / bcf_cfg_svrsslcfg
Severity: Error
Component: bcf / bcf_cfg_pdversion
HPDBF0178E Error opening or reading the response
file %s. Ensure the file exists and that it
contains the correct stanza name, %s.
Explanation: The response file could not be accessed
or the stanza name is invalid.
Action: Check the path and permissions of the file,
make sure it has a valid stanza name, then retry the
command.
HPDBF0232E
The format of the servers option is
host1:port1:rank1,host2:port2:rank2,...
Explanation: An invalid servers format was entered.
Action: Rerun the command with a valid servers
format.
Name: bcf_svrsslcfg_svrsformat
Number: 0x306950e8 (812208360)
Severity: Error
Component: bcf / bcf_cfg_svrsslcfg
Name: bcf_cmdparser_rspfile_error
Number: 0x306950b2 (812208306)
HPDBF0233E
Severity: Error
An invalid server option was entered.
The format of the server option is
host:port:rank.
Component: bcf / bcf_cfg_jutil
Explanation: See message.
HPDBF0229E
Action: Rerun the command with a valid server
option.
The configuration action is invalid.
Valid actions are ’create’ or ’replace’.
Explanation: See message.
Action: Retry the command with a valid configuration
action.
Name: bcf_svrsslcfg_cfgaction
Number: 0x306950e5 (812208357)
Severity: Error
Component: bcf / bcf_cfg_svrsslcfg
Name: bcf_svrsslcfg_svrformat
Number: 0x306950e9 (812208361)
Severity: Error
Component: bcf / bcf_cfg_svrsslcfg
HPDBF0234E
Unable to load pd.properties.
Explanation: Not able to load pd.properties files.
Action: Make sure pdjrte is configured.
Name: bcf_svrsslcfg_pdprop
Chapter 1. Tivoli Access Manager Base Messages
83
Number: 0x306950ea (812208362)
HPDBF0239E
Severity: Error
Component: bcf / bcf_cfg_svrsslcfg
The listening option is invalid. The
value must be ’true’ or ’false’.
Explanation: See message.
Action: Retry the command with valid listening value.
HPDBF0235E
Invalid key file or configuration file
name.
Explanation: See message.
Action: Retry the command with valid key file or
configuration file name.
Name: bcf_svrsslcfg_invalid_listen
Number: 0x306950ef (812208367)
Severity: Error
Component: bcf / bcf_cfg_svrsslcfg
Name: bcf_svrsslcfg_url
Number: 0x306950eb (812208363)
Severity: Error
Component: bcf / bcf_cfg_svrsslcfg
HPDBF0240E
The refresh interval is invalid. The
value must be an integer greater than or
equal to zero.
Explanation: See message.
Action: Retry the command with a valid refresh value.
HPDBF0236E
The directory does not exist.
Explanation: See message.
Action: Ensure the specified directory exist and has
appropriate permissions.
Name: bcf_svrsslcfg_dir
Number: 0x306950ec (812208364)
Severity: Error
Component: bcf / bcf_cfg_svrsslcfg
Name: bcf_svrsslcfg_invalid_refresh
Number: 0x306950f0 (812208368)
Severity: Error
Component: bcf / bcf_cfg_svrsslcfg
HPDBF0247E The local host name cannot be
obtained. Specify the host name using
the -host option.
Explanation: See message.
HPDBF0237E
The mode value is invalid. The value
must be ’remote’ or ’local’.
Action: Specify a value for -host option. and retry the
command.
Explanation: See message.
Name: bcf_svrsslcfg_cantgethost
Action: Retry the command with valid mode value.
Number: 0x306950f7 (812208375)
Name: bcf_svrsslcfg_mode
Severity: Error
Number: 0x306950ed (812208365)
Component: bcf / bcf_cfg_svrsslcfg
Severity: Error
Component: bcf / bcf_cfg_svrsslcfg
HPDBF0238E
The server option is invalid. Specify
one policy server or authorization server
parameter.
Explanation: See message.
HPDBF0248W The following options are ignored
when configuring a remote-mode server:
%s
Explanation: The -dblisten, -dbrefresh and -dbdir
options are valid only for local-mode servers. Remote
mode was specified.
Name: bcf_svrsslcfg_svrparm
Action: No action required, but be aware that the
values for the listed options are not included in the
application server’s configuration. If the application
server is required to use the options, it must be
unconfigured and reconfigured as a local-mode server.
Number: 0x306950ee (812208366)
Name: bcf_svrsslcfg_ignoredoptions
Severity: Error
Number: 0x306950f8 (812208376)
Component: bcf / bcf_cfg_svrsslcfg
Severity: Warning
Action: Retry the command with valid server
parameter.
Component: bcf / bcf_cfg_svrsslcfg
84
Error Message Reference
HPDBF0250E
The certificate refresh is invalid. The
value must be true or false.
HPDBF0287E An error occurred while copying the
template file.
Explanation: See message.
Explanation: The template file could not be copied.
Action: Retry the command with a valid
appsvr-certrefresh setting.
Action: Make sure the file exists and has permissions
appropriate for copying.
Name: bcf_svrsslcfg_invalid_certrefresh
Name: bcf_pdproxy_cperr
Number: 0x306950fa (812208378)
Number: 0x3069511f (812208415)
Severity: Error
Severity: Error
Component: bcf / bcf_cfg_svrsslcfg
Component: bcf / bcf_cfg_pdproxyd
HPDBF0275E Invalid LDAP SSL information was
entered.
HPDBF0290E Tivoli Access Manager runtime must
be configured first.
Explanation: See message.
Explanation: See message.
Action: Provide the correct key file, key label,
password and ssl port number, then retry the
command.
Action: Configure Tivoli Access Manager runtime,
then retry the command.
Name: bcf_pdproxy_invalidssl
Number: 0x30695113 (812208403)
Severity: Error
Name: bcf_pdproxy_rtecfg
Number: 0x30695122 (812208418)
Severity: Error
Component: bcf / bcf_cfg_pdproxyd
Component: bcf / bcf_cfg_pdproxyd
HPDBF0281E Incorrect Tivoli Access Manager
administrator name or password.
Explanation: An incorrected administrator name or
password was given.
HPDBF0291E Tivoli Access Manager policy server
has already been unconfigured.
Explanation: The policy server is already
unconfigured.
Action: Correct the information and retry the
command.
Action: This process only works if the policy server is
currently configured. Configure the server and retry the
command.
Name: bcf_pdproxy_invalidpd
Name: bcf_pdproxy_unconfigured
Number: 0x30695119 (812208409)
Number: 0x30695123 (812208419)
Severity: Error
Severity: Error
Component: bcf / bcf_cfg_pdproxyd
Component: bcf / bcf_cfg_pdproxyd
HPDBF0284E The port number is invalid. The value
must be greater than 0.:
HPDBF0292E The PDMgrProxyd service could not be
deleted.
Explanation: See message.
Explanation: See message.
Action: Enter a port number that is greater than zero.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: bcf_pdproxy_portnumber
Number: 0x3069511c (812208412)
Severity: Error
Component: bcf / bcf_cfg_pdproxyd
Name: bcf_pdproxy_DeRegpxy
Number: 0x30695124 (812208420)
Severity: Fatal
Component: bcf / bcf_cfg_pdproxyd
Chapter 1. Tivoli Access Manager Base Messages
85
HPDBF0293E The PDMgrProxyd service could not be
registered.
Explanation: See message.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: bcf_pdproxy_notregpxyd
Number: 0x30695125 (812208421)
Severity: Fatal
Component: bcf / bcf_cfg_pdproxyd
HPDBF0297E An error occurred while starting the
Tivoli Access Manager policy proxy
server.
Explanation: See message.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: bcf_pdproxy_errorstartsvr
Number: 0x30695129 (812208425)
Severity: Error
Component: bcf / bcf_cfg_pdproxyd
HPDBF0294E An error occurred opening
configuration file.
Explanation: See message.
Action: Check the permissions of the file and make
sure it is not in use by another process, then retry the
command.
Name: bcf_pdproxy_erropenconf
Number: 0x30695126 (812208422)
Severity: Error
Component: bcf / bcf_cfg_pdproxyd
HPDBF0295E An error occurred while unconfiguring
the Tivoli Access Manager proxy server.
Explanation: See message.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: bcf_pdproxy_errunconfig
Number: 0x30695127 (812208423)
Severity: Error
Component: bcf / bcf_cfg_pdproxyd
HPDBF0296E A memory allocation error resulted in
the termination of the program. Check
the maximum allowable memory and
the amount of system paging space as
these may both need to be increased.
Explanation: See message.
Action: Increase the maximum allowable memory and
the system paging space or shut down one or more
applications.
Name: bcf_pdproxy_memoryerror
Number: 0x30695128 (812208424)
Severity: Fatal
Component: bcf / bcf_cfg_pdproxyd
86
Error Message Reference
HPDBF0340W An error occurred while checking the
properties of the target Java Runtime
Environment (%s). The JRE might need
post-configuration modification.
Explanation: During Access Manager Runtime for
Java configuration, the version and vendor of the target
JRE are examined. Since the version and vendor could
not be determined, the configuration continues as if the
JRE needs no modification.
Action: After Access Manager Runtime for Java
configuration, determine the target Java runtime
version and vendor manually. This can be done by
executing ’java -version’, where the java invoked is in
the target runtime. The output should indicate the
version and vendor. If the version is JRE 1.4 or later
and the vendor is Sun Microsystems, the JRE can then
be modified manually: The jsse.jar file present in the
JRE’s lib directory must be moved to a backup location
outside of the lib directory. Note that when the Access
Manager Runtime for Java is unconfigured for that JRE,
the jsse.jar file must be manually restored from its
backup location to the lib directory.
Name: bcf_jtrace_cant_check_jre
Number: 0x30695154 (812208468)
Severity: Warning
Component: bcf / bcf_cfg_jrte
HPDBF0341E The Java Runtime Environment (%s)
cannot be configured. Configure by
using the pdjrtecfg command in
non-interactive mode.
Explanation: During Access Manager Runtime for
Java configuration, it was determined that the target
JRE must be modified. The currently running JRE is the
target JRE and cannot be modified as required.
Action: Configure the Access Manager Runtime for
Java by executing the pdjrtecfg command found in the
Access Manager sbin directory. The pdjrtecfg command
must be executed in non-interactive mode. Also, do not
use a response file when executing pdjrtecfg.
Name: bcf_jtrace_cant_modify_current_jre
Number: 0x30695155 (812208469)
HPDBF0344W The temporary file %s cannot be
deleted. Manually delete the file.
Component: bcf / bcf_cfg_jrte
Explanation: During Access Manager Runtime for
Java configuration, a temporary file was created, but
cannot be deleted, possibly due to file system access
problems.
HPDBF0342E The Java Runtime Environment (%s)
cannot be configured.
Action: Manually delete the named file.
Severity: Error
Explanation: The target Java Runtime Environment
must be modified in order to be configured. The
configuration program was unable to make the
modifications, possibly due to file system access
problems.
Action: Ensure that the lib directory in the target Java
Runtime Environment is writable by the user running
the configuration program. Also ensure that the jsse.jar
file found in the lib directory can be moved by that
same user. Finally, ensure the target JRE is not actively
running during configuration. Alternatively, manually
move the jsse.jar file to a backup location outside of the
lib directory and then re-run the configuration
program. In this case, note that when the Access
Manager Runtime for Java is unconfigured for that JRE,
the jsse.jar file must be manually restored from its
backup location to the lib directory.
Name: bcf_jtrace_cant_modify_target_jre
Number: 0x30695156 (812208470)
Severity: Error
Component: bcf / bcf_cfg_jrte
HPDBF0343W An error occurred while restoring the
original state of the target Java Runtime
Environment (%s). The JRE might need
post-unconfiguration modification.
Explanation: During Access Manager Runtime for
Java configuration, the target JRE was modified so that
the jsse.jar file in its lib directory was moved to a
jarbackup directory created under lib. The
unconfiguration program is unable to move the jsse.jar
file back to its original location and remove the
jarbackup directory, possibly due to file system access
problems.
Action: Manually restore the state of the Java Runtime
Environment by moving the jsse.jar file in JRE
lib/jarbackup directory to its original location in the lib
directory. Then remove the jarbackup directory.
Name: bcf_jtrace_cant_remove_tempfile
Number: 0x30695158 (812208472)
Severity: Warning
Component: bcf / bcf_cfg_jrte
HPDBF0350E
Unable to start Tivoli Access Manager
Web Portal Manager.
Explanation: An error occurred while starting Tivoli
Access Manager Web Portal Manager.
Action: Stop and restart the IBM WebSphere
Application Server.
Name: bcf_pdwpm_start_error
Number: 0x3069515e (812208478)
Severity: Error
Component: bcf / bcf_cfg_pdwpm
HPDBF0358E Could not contact the Tivoli Access
Manager authorization server. Possible
causes are: The Authorization server is
not running. The Authorization server
host name or port number is incorrect.
Explanation: See message.
Action: Make sure the authorization server is running
and specify a correct value for host name and port
number, and retry the command.
Name: bcf_pdwpm_cantgetauthzhostport
Number: 0x30695166 (812208486)
Severity: Error
Component: bcf / bcf_cfg_pdwpm
Name: bcf_jtrace_cant_restore_target_jre
HPDBF0359E Could not contact the WebSphere
server. Possible causes are: The
WebSphere server is not running. The
WebSphere server host name or port
number is incorrect.
Number: 0x30695157 (812208471)
Explanation: See message.
Severity: Warning
Action: Make sure the IBM WebSphere Application
Server or Deployment Manager is running and specify
a correct value for host name and port number, and
retry the command.
Component: bcf / bcf_cfg_jrte
Name: bcf_pdwpm_cantgetwashostport
Chapter 1. Tivoli Access Manager Base Messages
87
Number: 0x30695167 (812208487)
Severity: Error
Component: bcf / bcf_cfg_pdwpm
Action: Specify a correct value for the host name and
retry the command.
Name: bcf_pdwpm_invalidwashostname
Number: 0x3069516b (812208491)
HPDBF0360E Could not find a IBM WebSphere
Application Server or Cluster. Possible
causes are: The WebSphere server host
name or port number is incorrect. The
specified cluster or application server is
invalid.
Severity: Error
Explanation: See message.
Explanation: See message.
Action: Specify a correct value for host name and port
number, and retry the command.
Action: Specify all of the required options. Retry the
command.
Name: bcf_pdwpm_cantfindwasservers
Name: bcf_pdwpm_missingrequired
Number: 0x30695168 (812208488)
Number: 0x3069516c (812208492)
Severity: Error
Severity: Error
Component: bcf / bcf_cfg_pdwpm
Component: bcf / bcf_cfg_pdwpm
HPDBF0361E Invalid hostname for the Tivoli Access
Manager policy server. Possible causes
are: The Policy server host name is
incorrect.
HPDBF0380E Unable to create the PDJLog.properties
file in the specified JRE. Ensure you
have the correct permissions to do so.
Explanation: See message.
Action: Specify a correct value for the host name and
retry the command.
Name: bcf_pdwpm_invalidhostname
Number: 0x30695169 (812208489)
Severity: Error
Component: bcf / bcf_cfg_pdwpm
HPDBF0362E Invalid hostname for the Tivoli Access
Manager authorization server. Possible
causes are: The Authorization server
host name is incorrect.
Explanation: See message.
Action: Specify a correct value for the host name and
retry the command.
Name: bcf_pdwpm_invalidauthzhostname
Number: 0x3069516a (812208490)
Severity: Error
Component: bcf / bcf_cfg_pdwpm
Component: bcf / bcf_cfg_pdwpm
HPDBF0364E The required option (%s) was not
specified.
Explanation: Unable to create PDJLog.properties file
in PolicyDirector directory of the JRE being configured.
Action: Ensure that the user has the necessary
permissions to create the PolicyDirector directory and
the PDJLog.properties file in the <JRE_HOME>/
PolicyDirector directory.
Name: bcf_jrte_create_pdjlogprops_fail
Number: 0x3069517c (812208508)
Severity: Error
Component: bcf / bcf_cfg_jrte
HPDBF0391E The Tivoli Access Manager Runtime
for Java cannot run with the FIPS mode
set.
Explanation: The Tivoli Access Manager Runtime for
Java has configured FIPS mode that is different from
the WebSphere FIPS mode.
Action: Make sure that the WebSphere and Tivoli
Access Manager Runtime for Java are configured with
the same FIPS setting.
Name: bcf_jrte_cannot_run_fips
Number: 0x30695187 (812208519)
HPDBF0363E Invalid hostname for the WebSphere
server. Possible causes are: The
WebSphere host name is incorrect.
Explanation: See message.
88
Error Message Reference
Severity: Error
Component: bcf / bcf_cfg_jrte
HPDBF0405E The Access Manager Runtime for Java
installed within the JRE (%s) version
(%s) is outdated. Please upgrade the
Access Manager Runtime for Java.
Explanation: Tivoli Access Manager Runtime for Java
needs to be upgraded.
Component: bcf / bcf_cfg_amauditcfg
HPDBF0437E Option %s is required.
Explanation: Required option is not specified.
Action: Reissue the command specifying the missing
option.
Action: Upgrade the Tivoli Access Manager Runtime
for Java configured to the JRE.
Name: bcf_amauditcfg_missingoption
Name: bcf_jrte_jvm_outdated
Number: 0x306951b5 (812208565)
Number: 0x30695195 (812208533)
Severity: Error
Severity: Error
Component: bcf / bcf_cfg_amauditcfg
Component: bcf / bcf_cfg_pdwpm
HPDBF0432E A memory allocation error resulted in
the termination of the program. Check
the maximum allowable memory and
the amount of system paging space as
these may both need to be increased.
HPDBF0438E The server configuration file %s is
invalid.
Explanation: The file does not contain an azn server
name and is not the policy server configuration file.
Action: Reissue the command specifying a valid
server configuration file.
Explanation: See message.
Name: bcf_amauditcfg_invalidsrvconf
Action: Increase the maximum allowable memory and
the system paging space or shut down one or more
applications.
Number: 0x306951b6 (812208566)
Name: bcf_amauditcfg_memoryerror
Component: bcf / bcf_cfg_amauditcfg
Number: 0x306951b0 (812208560)
Severity: Fatal
Component: bcf / bcf_cfg_amauditcfg
HPDBF0435E An error occurred while copying the
template file.
Explanation: The template file could not be copied.
Severity: Error
HPDBF0439E Invalid value specified for -action.
Valid values are \’config\’ and
\’unconfig\’.
Explanation: Invalid value specified for -action. Valid
values are \’config\’ and \’unconfig\’.
Action: Reissue the command specifying an action of
\’config\’ or \’unconfig\’.
Action: Make sure the file exists and has permissions
appropriate for copying.
Name: bcf_amauditcfg_invalidaction
Name: bcf_amauditcfg_cperr
Severity: Error
Number: 0x306951b3 (812208563)
Component: bcf / bcf_cfg_amauditcfg
Number: 0x306951b7 (812208567)
Severity: Error
Component: bcf / bcf_cfg_amauditcfg
HPDBF0436E Tivoli Access Manager server has
already been unconfigured. from
common and audit reporting services.
Explanation: The server is already unconfigured from
common audit and reporting services.
HPDBF0440E The file %s could not be accessed.
Explanation: The file does not exist or does not have
the correct permissions.
Action: Reissue the command specifying a valid file.
Name: bcf_amauditcfg_invalidfile
Number: 0x306951b8 (812208568)
Action: No action required.
Severity: Error
Name: bcf_amauditcfg_unconfigured
Component: bcf / bcf_cfg_amauditcfg
Number: 0x306951b4 (812208564)
Severity: Error
Chapter 1. Tivoli Access Manager Base Messages
89
HPDBF0442E Option %s is required with option %s.
Explanation: Required option is not specified.
Action: Reissue the command specifying the missing
option.
Name: bcf_amauditcfg_cooption
Number: 0x306951ba (812208570)
Severity: Error
Component: bcf / bcf_cfg_amauditcfg
HPDBF0443E The server audit configuration file %s
could not be created.
HPDBF0446E Invalid value specified for -enable_ssl.
Valid values are \’yes\’ and \’no\’.
Explanation: Invalid value specified for -enable_ssl.
Valid values are \’yes’ and \’no\’.
Action: Reissue the command specifying a valid value
for -enable_ssl.
Name: bcf_amauditcfg_invalidssl
Number: 0x306951be (812208574)
Severity: Error
Component: bcf / bcf_cfg_amauditcfg
Explanation: The server audit configuration file could
not be created.
HPDBF0447E Invalid value specified for
-enable_pwd_auth. Valid values are
\’yes\’ and \’no\’.
Action: Ensure that there is enough space and that the
directory has the correct permissions Then, reissue the
command.
Explanation: Invalid value specified for
-enable_pwd_auth. Valid values are \’yes’ and \’no\’.
Name: bcf_amauditcfg_conf_not_created
Action: Reissue the command specifying a valid value
for -enable_pwd_auth.
Number: 0x306951bb (812208571)
Severity: Error
Component: bcf / bcf_cfg_amauditcfg
HPDBF0444E Configuration data could not be
written to %s.
Explanation: The server audit configuration file could
not be created.
Action: Ensure that there is enough space and that the
directory has the correct permissions Then, reissue the
command.
Name: bcf_amauditcfg_conf_not_write
Number: 0x306951bc (812208572)
Severity: Error
Component: bcf / bcf_cfg_amauditcfg
HPDBF0445E Invalid value specified for
-disk_cache_mode. Valid values are
\’auto\’, \’always\’, and \’never\’.
Explanation: Invalid value specified for
-disk_cache_mode. Valid values are \’auto\’,
’\always’\, and \’never\’.
Action: Reissue the command specifying a valid value
for -disk_cache_mode.
Name: bcf_amauditcfg_invalidpwdauth
Number: 0x306951bf (812208575)
Severity: Error
Component: bcf / bcf_cfg_amauditcfg
HPDBF0448E The audit server could not be
contacted.
Explanation: The audit server is down or the
information provided for the audit server is incorrect.
Action: After verifying the audit server is running and
the information provided for the audit server is correct,
reissue the command.
Name: bcf_amauditcfg_invalidsrv
Number: 0x306951c0 (812208576)
Severity: Error
Component: bcf / bcf_cfg_amauditcfg
HPDBF0470E The audit key file is invalid.
Explanation: The audit key file is invalid.
Action: Specify a valid key file.
Name: bcf_amauditcfg_invalidkeyfile
Number: 0x306951d6 (812208598)
Name: bcf_amauditcfg_invalidcache
Severity: Error
Number: 0x306951bd (812208573)
Component: bcf / bcf_cfg_amauditcfg
Severity: Error
Component: bcf / bcf_cfg_amauditcfg
90
Error Message Reference
HPDBF0471E The audit stash file is invalid.
Explanation: The audit stash file is invalid.
Action: Specify a valid stash file.
Name: bcf_amauditcfg_invalidstashfile
Number: 0x306951d7 (812208599)
Severity: Error
Component: bcf / bcf_cfg_amauditcfg
HPDBF0476E Incorrect Tivoli Access Manager value
for policysvr. The value should contain
host:port:rank.
Explanation: An incorrect entry was given for
policysvr. It should have host:port:rank.
Action: Correct the information and retry the
command.
Name: bcf_pdproxy_invalid_host_port_rank
Number: 0x306951dc (812208604)
HPDBF0472E The audit ID is invalid.
Severity: Error
Explanation: The audit ID is invalid.
Component: bcf / bcf_cfg_pdproxyd
Action: Specify a valid audit ID.
Name: bcf_amauditcfg_invalidauditid
Number: 0x306951d8 (812208600)
Severity: Error
Component: bcf / bcf_cfg_amauditcfg
HPDBF0477I The option %s is invalid.
Explanation: The option is invalid.
Action: Specify a valid option name.
Name: bcf_cmdparser_invalidhelpoption
Number: 0x306951dd (812208605)
HPDBF0473E The audit ID password is invalid.
Severity: Notice
Explanation: The audit ID password is invalid.
Component: bcf / bcf_cfg_amauditcfg
Action: Specify a valid audit ID password.
Name: bcf_amauditcfg_invalidauditpwd
Number: 0x306951d9 (812208601)
Severity: Error
Component: bcf / bcf_cfg_amauditcfg
HPDBF0474E The audit server URL is invalid.
HPDBF0479E Invalid value specified for
-temp_storage_full_timeout. Valid values
are \’-1\’, \’0\’, and any positive
integer.
Explanation: Invalid value specified for
-temp_storage_full_timeout. Valid values are \’-1\’,
’\0’\, and any positive integer.
Explanation: The audit server URL is invalid.
Action: Reissue the command specifying a valid value
for -temp_storage_full_timeout.
Action: Specify a valid audit server URL.
Name: bcf_amauditcfg_invalidtempstoragefulltimeout_
Name: bcf_amauditcfg_invalidauditurl
Number: 0x306951df (812208607)
Number: 0x306951da (812208602)
Severity: Error
Severity: Error
Component: bcf / bcf_cfg_amauditcfg
Component: bcf / bcf_cfg_amauditcfg
HPDBF0475E The audit cache file is invalid.
Explanation: The audit cache file is invalid.
Action: Specify a valid audit cache file.
Name: bcf_amauditcfg_invalidcachefile
HPDBF0480E The option -temp_storage_full_timeout
is only valid when -disk_cache_mode is
set to \’auto\’ or \’always\’.
Explanation: The option -temp_storage_full_timeout is
only valid when -disk_cache_mode is set to \’auto\’ or
’\always\’.
Number: 0x306951db (812208603)
Action: Reissue the command specifying a proper
value for -disk_cache_mode.
Severity: Error
Name: bcf_amauditcfg_invalidtimeoutwithcache_
Component: bcf / bcf_cfg_amauditcfg
Number: 0x306951e0 (812208608)
Severity: Error
Component: bcf / bcf_cfg_amauditcfg
Chapter 1. Tivoli Access Manager Base Messages
91
HPDBF0491I FIPS mode enabled for java application.
Explanation: Informational message.
Action: No Action Required
Name: bcf_fips_mode_enabled
Number: 0x306951eb (812208619)
Severity: Notice
Component: bcf / bcf_cfg_amauditcfg
HPDBG0001E Unsupported operating system type:
%s.
Explanation: The command is not supported on this
operating system.
Action: Change to a supported operating system and
retry the command.
Explanation: Same as text.
Action: Same as text.
Name: ammsg_noivmgr
Number: 0x30696011 (812212241)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG0019W The policy server is not running in
this secure domain. Start the policy
server and retry the command.
Explanation: The policy server cannot be contacted.
Action: Start the policy server and retry the command.
Name: ammsg_ivmgrnotrunning
Number: 0x30696013 (812212243)
Name: ammsg_unsuppos
Severity: Warning
Number: 0x30696001 (812212225)
Component: bcg / pdc_svc_general
Severity: Error
Component: bcg / pdc_svc_general
HPDBG0003E Login to the server failed.
Explanation: An attempt to login to the server was
unsuccessful.
Action: Ensure the server is running, that all ports,
user IDs and passowrds are correct, then retry the
command.
HPDBG0028W The parent directory does not exist.
Cannot create the document root
directory.
Explanation: The directory cannot be created.
Action: Check the file permissions and ensure there is
enough disk space.
Name: ammsg_failcreatedocroot
Number: 0x3069601c (812212252)
Name: ammsg_loginfailed
Severity: Warning
Number: 0x30696003 (812212227)
Component: bcg / pdc_svc_general
Severity: Error
Component: bcg / pdc_svc_general
HPDBG0043W Could not restart the server.
Explanation: The server could not be restarted.
HPDBG0005E This script must be executed by ’root’
(uid = 0).
Action: Check the error logs, correct the problem, then
retry the command.
Explanation: Invalid credentials detected running this
process.
Name: ammsg_failrestartserver
Action: Login as the root user and retry the command.
Name: ammsg_rootwarn
Number: 0x3069602b (812212267)
Severity: Warning
Component: bcg / pdc_svc_general
Number: 0x30696005 (812212229)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG0017E The policy server must first be
installed in the secure domain. \tInstall
the Tivoli Access Manager policy server
on one of the systems \tin your secure
domain and retry the command.
92
Error Message Reference
HPDBG0062W The post-configuration phase of the
package failed.
Explanation: A problem has occurred that prevented
the package from configuring successfully.
Action: Review the log files, correct the problem, then
retry the command.
Name: ammsg_postfailed
Number: 0x3069603e (812212286)
Component: bcg / pdc_svc_general
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0063W The pre-configuration phase of the
package failed.
Explanation: A problem has occurred that prevented
the package from configuring successfully.
Action: Review the log files, correct the problem, then
retry the command.
HPDBG0069I Unconfigure the authorization server
before the policy server. The
unconfiguration failed.
Explanation: The unconfiguration was attempted out
of sequence.
Action: Same as text.
Name: ammsg_acldmgr
Number: 0x30696045 (812212293)
Name: ammsg_prefailed
Severity: Notice
Number: 0x3069603f (812212287)
Component: bcg / pdc_svc_general
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0064W The package is already configured.
Explanation: The package cannot be configured
because it is already configured.
Action: Unconfigure the package first, then retry the
command.
Name: ammsg_alreadyconf
Number: 0x30696040 (812212288)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0066W The pre-removal of the package has
failed.
Explanation: An error occurred during the pre-remove
phase of the process.
Action: Review log files, correct the problem, then
retry the command.
Name: ammsg_preremfailed
Number: 0x30696042 (812212290)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0068I Unconfigure the net package before
the policy server. The unconfiguration
failed.
Explanation: The unconfiguration was attempted out
of sequence.
Action: Same as text.
Name: ammsg_netmgr
Number: 0x30696044 (812212292)
Severity: Notice
HPDBG0070I Unconfigure the policy server before
the base package. The unconfiguration
failed.
Explanation: The unconfiguration was attempted out
of sequence.
Action: Same as text.
Name: ammsg_mgrbase
Number: 0x30696046 (812212294)
Severity: Notice
Component: bcg / pdc_svc_general
HPDBG0071I Unconfigure the net package before
the base package. The unconfiguration
failed.
Explanation: The unconfiguration was attempted out
of sequence.
Action: Same as text.
Name: ammsg_netbase
Number: 0x30696047 (812212295)
Severity: Notice
Component: bcg / pdc_svc_general
HPDBG0072I Unconfigure the application developer
kit before the base package. The
unconfiguration failed.
Explanation: The unconfiguration was attempted out
of sequence.
Action: Same as text.
Name: ammsg_authadkbase
Number: 0x30696048 (812212296)
Severity: Notice
Component: bcg / pdc_svc_general
Chapter 1. Tivoli Access Manager Base Messages
93
HPDBG0073I Unconfigure the console package
before the base package. The
unconfiguration failed.
Explanation: The unconfiguration was attempted out
of sequence.
Action: Same as text.
Name: ammsg_consolebase
Number: 0x30696049 (812212297)
Severity: Notice
HPDBG0107W SBS unconfiguration error.
Explanation: An error occurred during the
unconfiguration.
Action: Review the log files, correct the problem, then
retry the command.
Name: ammsg_sbs_unconfig_title
Number: 0x3069606b (812212331)
Severity: Warning
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
HPDBG0108W Cannot connect to the LDAP server.
HPDBG0074I Unconfigure all of the packages before
the SMIT menus.
Explanation: Same as text.
Explanation: The unconfiguration was attempted out
of sequence.
Action: Ensure the administrator id, password, and
port are correct and that the server is running on the
specified machine.
Action: Same as text.
Name: ammsg_commonbase
Number: 0x3069604a (812212298)
Severity: Notice
Name: ammsg_sbs_no_ldap_sslkeyconnection
Number: 0x3069606c (812212332)
Severity: Warning
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
HPDBG0109W Invalid LDAP authentication.
HPDBG0087W Could not contact the LDAP server.
Explanation: Same as text.
Action: Ensure the port, administrator id, and
password are correct, and ensure the server is running
on the specified host name.
Name: ammsg_ldapunavail
Number: 0x30696057 (812212311)
Severity: Warning
Explanation: A password, administrator id, keyfile
password, etc. was invalid.
Action: Ensure the correct passwords and ids have
been specified, then retry the command.
Name: ammsg_sbs_no_authentication
Number: 0x3069606d (812212333)
Severity: Warning
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
HPDBG0110W The LDAP server is not available.
HPDBG0106W SBS configuration error.
Explanation: An error occurred during the
configuration.
Action: Review the log files, correct the problem, then
retry the command.
Name: ammsg_sbs_config_title
Number: 0x3069606a (812212330)
Severity: Warning
Component: bcg / pdc_svc_general
Explanation: The LDAP server is not responding.
Action: Ensure the server name and port have been
speified correctly then retry the command.
Name: ammsg_sbs_server_down
Number: 0x3069606e (812212334)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0111W Not authorized to perform the LDAP
operation.
Explanation: The LDAP server denied the requested
operation.
94
Error Message Reference
Action: Ensure the user has appropriate access then
retry the command.
Name: ammsg_sbs_not_authorized
Number: 0x3069606f (812212335)
Name: ammsg_disable_netseal_failed
Number: 0x30696073 (812212339)
Severity: Warning
Component: bcg / pdc_svc_general
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0112W Cannot connect to the LDAP server
using SSL.
Explanation: Same as text.
Action: Ensure the SSL key file is valid, the password
and port is correct, and that the server is running. Also
check the date on the machines and validate that the
key file has not expired.
Name: ammsg_sbs_no_ssl_connection
Number: 0x30696070 (812212336)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0113W An unexpected LDAP error has
occurred.
Explanation: Same as text.
Action: Check the log files on this machine and on the
LDAP server, correct the problem, then retry the
command.
Name: ammsg_sbs_other_error
HPDBG0117W LDAP client version %s does not
appear to be installed. The LDAP client
must be installed and configured in
order to use the LDAP user registry.
Explanation: Same as text.
Action: Same as text.
Name: ammsg_noldapcwarn
Number: 0x30696075 (812212341)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0119W Configure the net package before the
trap package. The configuration failed.
Explanation: A configuration was attempted out of
sequence.
Action: Configure the packages in order.
Name: ammsg_nettrap
Number: 0x30696077 (812212343)
Severity: Warning
Component: bcg / pdc_svc_general
Number: 0x30696071 (812212337)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0114W Unable to disable the Tivoli Access
Manager WebSEAL server.
Explanation: Same as text.
Action: Review the log files, correct the problem, then
retry the command.
Name: ammsg_disable_webseal_failed
HPDBG0120I The LDAP GSO database DN does not
exist.
Explanation: Same as text.
Action: Ensure the LDAP server has been properly
configured, then retry the command.
Name: ammsg_gsodn_notexist
Number: 0x30696078 (812212344)
Severity: Notice
Component: bcg / pdc_svc_general
Number: 0x30696072 (812212338)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0115W Unable to disable the NetSEAL
server.
Explanation: Same as text.
Action: Review the log files, correct the problem, then
retry the command.
HPDBG0123W Unconfigure the authorization server
package before the base package. The
unconfiguration failed.
Explanation: The unconfiguration was attempted out
of sequence.
Action: Same as text.
Name: ammsg_acldbase
Number: 0x3069607b (812212347)
Severity: Warning
Chapter 1. Tivoli Access Manager Base Messages
95
Component: bcg / pdc_svc_general
HPDBG0131W This package is partially configured.
Unconfigure this package before
configuring it. To unconfigure, return to
the Tivoli Access Manager
Configuration Menu and select Exit.
HPDBG0150W Unconfigure the policy server
package before the runtime package.
The unconfiguration failed.
Explanation: The unconfiguration was attempted out
of sequence.
Action: Same as text.
Explanation: Same as text.
Name: ammsg_mgrrte
Action: Same as text.
Number: 0x30696096 (812212374)
Name: ammsg_partiallyconfigured
Severity: Warning
Number: 0x30696083 (812212355)
Component: bcg / pdc_svc_general
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0147W Configure the Tivoli Access Manager
Runtime package before this package.
The configuration failed.
Explanation: A configuration was attempted out of
sequence.
HPDBG0151W Unconfigure the authorization server
package before the runtime package.
The unconfiguration failed.
Explanation: The unconfiguration was attempted out
of sequence.
Action: Same as text.
Name: ammsg_acldrte
Action: Configure the packages in order.
Number: 0x30696097 (812212375)
Name: ammsg_rtemgr
Severity: Warning
Number: 0x30696093 (812212371)
Component: bcg / pdc_svc_general
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0148W Configure the Tivoli Access Manager
Runtime package before the Net
package. The configuration has failed.
Explanation: A configuration was attempted out of
sequence.
HPDBG0152W Unconfigure the Net package before
the runtime package. The
unconfiguration failed.
Explanation: The unconfiguration was attempted out
of sequence.
Action: Same as text.
Name: ammsg_netrte
Action: Configure the packages in order.
Number: 0x30696098 (812212376)
Name: ammsg_rtenet
Severity: Warning
Number: 0x30696094 (812212372)
Component: bcg / pdc_svc_general
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0149W Configure the runtime package
before the authorization server package.
The configuration failed.
Explanation: A configuration was attempted out of
sequence.
Action: Configure the packages in order.
Name: ammsg_rteacld
Number: 0x30696095 (812212373)
Severity: Warning
Component: bcg / pdc_svc_general
96
Error Message Reference
HPDBG0153W Could not initialize the SSL
configuration.
Explanation: Same as text.
Action: Ensure the key file, password, and port are
correct and that the server is running in SSL mode.
Name: ammsg_failmgrsslcfg
Number: 0x30696099 (812212377)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0154W Could not initialize the Base SSL
configuration.
Explanation: Same as text.
Action: Ensure the key file, password, and port are
correct and that the server is running in SSL mode.
Name: ammsg_failbassslcfg
Number: 0x3069609a (812212378)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0165W Configure the runtime package
before the console package . The
configuration failed.
Explanation: A configuration was attempted out of
sequence.
Action: Same as text.
Name: ammsg_rteconsole
Number: 0x306960a5 (812212389)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0155I SSL configuration completed
successfully. The Tivoli Access Manager
policy server’s certificate is saved in
/var/PolicyDirector/keytab/pdcacert.b64.
This certificate is needed when
configuring all other machines in the
secure domain.
Explanation: Same as text.
Action: Same as text.
Name: ammsg_mgrsslcfgcmpl
Number: 0x3069609b (812212379)
Severity: Notice
Component: bcg / pdc_svc_general
HPDBG0163W Install all required Tivoli Access
Manager packages on the system before
running pdconfig.
Explanation: Same as text.
Action: Same as text.
Name: ammsg_noteconfig
Number: 0x306960a3 (812212387)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0164W Configure the runtime package
before the application developer kit .
The configuration failed.
Explanation: A configuration was attempted out of
sequence.
Action: Same as text.
Name: ammsg_rteauthadk
Number: 0x306960a4 (812212388)
Severity: Warning
HPDBG0166W Unconfigure the application
developer kit before the runtime
package.
Explanation: The unconfiguration was attempted out
of sequence.
Action: Same as text.
Name: ammsg_authadkrte
Number: 0x306960a6 (812212390)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0167W Unconfigure the console package
before the runtime package.
Explanation: The unconfiguration was attempted out
of sequence.
Action: Same as text.
Name: ammsg_consolerte
Number: 0x306960a7 (812212391)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0191I Configure the runtime package before
the Web package. The configuration
failed.
Explanation: A configuration was attempted out of
sequence.
Action: Same as text.
Name: ammsg_rteweb
Number: 0x306960bf (812212415)
Severity: Notice
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
Chapter 1. Tivoli Access Manager Base Messages
97
HPDBG0192W Unconfigure the Web package before
the policy server package. The
unconfiguration failed.
Explanation: An unconfiguration was attempted out
of sequence.
Action: Same as text.
Name: ammsg_webmgr
Number: 0x306960c0 (812212416)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0193W Unconfigure the Web package before
the runtime package. The
unconfiguration failed.
Explanation: The unconfiguration was attempted out
of sequence.
Action: Same as text.
Name: ammsg_webrte
Number: 0x306960c1 (812212417)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0205W Some packages have not been
upgraded yet. Upgrade the remaining
packages and retry the command.
Explanation: Same as text.
Action: Same as text.
Name: ammsg_pkgleft
Number: 0x306960cd (812212429)
Severity: Warning
HPDBG0210W %s was not found.
Explanation: A file could not be found.
Action: Ensure the file exists and can be accessed,
then retry the command.
Name: ammsg_nofile
Number: 0x306960d2 (812212434)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0211W Configure the policy server before
the authorization server. The
configuration failed.
Explanation: A configuration was attempted out of
sequence.
Action: Same as text.
Name: ammsg_mgracld
Number: 0x306960d3 (812212435)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0212W Configure the policy server before
the net package. The configuration
failed.
Explanation: A configuration was attempted out of
sequence.
Action: Same as text.
Name: ammsg_mgrnet
Number: 0x306960d4 (812212436)
Severity: Warning
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
HPDBG0207W The upgrade failed.
Explanation: The upgrade did not complete
successfully.
Action: Review log files or other previous messages,
correct the problem, then retry the command.
HPDBG0213W Configure the policy server before
the Web package. The configuration
failed.
Explanation: A configuration was attempted out of
sequence.
Action: Same as text.
Name: ammsg_upgrade_failed
Name: ammsg_mgrweb
Number: 0x306960cf (812212431)
Number: 0x306960d5 (812212437)
Severity: Warning
Severity: Warning
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
98
Error Message Reference
HPDBG0214W The version of the installed LDAP
client must be %s or higher.
HPDBG0232E Load the Tivoli Access Manager
schema entries.
Explanation: Same as text.
Explanation: The schema for secAuthority=Default has
not been set up on the LDAP server.
Action: Install the LDAP client and retry the
command.
Action: Apply the schema then retry the command.
Name: ammsg_oldverldap
Name: ammsg_secschema
Number: 0x306960d6 (812212438)
Number: 0x306960e8 (812212456)
Severity: Warning
Severity: Error
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
HPDBG0215W Tivoli Access Manager policy server
must be upgraded on the system.
HPDBG0275W The necessary LiveCONTENT
directory components have not been
installed. They must be installed before
configuration can continue.
Explanation: Same as text.
Action: Same as text.
Name: ammsg_upgrademgrfirst
Number: 0x306960d7 (812212439)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0216I SecAuthority=Default suffix was not
found on the LDAP server, Tivoli Access
Manager initialization with LDAP
failed.
Explanation: Same as text.
Action: Same as text.
Name: ammsg_i500_unconf_ldap
Number: 0x30696113 (812212499)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0277W Tivoli Access Manager policy server
(%s,%s) cannot be contacted.
Explanation: The secAuthority=Default suffix is
required on the LDAP server.
Explanation: The specified host and port cannot be
accessed.
Action: Configure the suffix and schema on the LDAP
server and retry the command.
Action: Ensure the port and host name are correct,
then retry the command.
Name: ammsg_nosuffix
Name: ammsg_nopdmgr_server
Number: 0x306960d8 (812212440)
Number: 0x30696115 (812212501)
Severity: Notice
Severity: Warning
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
HPDBG0217W The LDAP server host name does not
exist.
HPDBG0278E Login to the Tivoli Access Manager
policy server failed. Ensure that the
password is correct and the policy server
is running, then retry the command.
Explanation: Same as text.
Action: Ensure the LDAP server host name was
entered correctly, that the server is running, and that
the port was specified correctly.
Explanation: Same as text.
Action: Same as text.
Name: ammsg_ldaphostundefined
Name: ammsg_pdmgr_loginfail
Number: 0x306960d9 (812212441)
Number: 0x30696116 (812212502)
Severity: Warning
Severity: Error
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
Chapter 1. Tivoli Access Manager Base Messages
99
HPDBG0284E Unable to read necessary files. Ensure
read permission is set for the current
user on the following files located in
the directory specified above:
ivmgrd.conf, ivmgrd.kdb, ivmgrd.sth,
pdcacert.b64
Explanation: Same as text.
Action: Same as text.
Name: ammsg_secondmgr_read_err
Number: 0x3069611c (812212508)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG0297W Unconfigure the policy proxy server
before the policy server. The
unconfiguration failed.
Explanation: The unconfiguration was attempted out
of sequence.
Action: Same as text.
Name: ammsg_proxydmgr
Number: 0x30696129 (812212521)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0298W Unconfigure the policy proxy server
before the runtime package. The
unconfiguration failed.
Explanation: The unconfiguration was attempted out
of sequence.
Component: bcg / pdc_svc_general
HPDBG0323E The specified administrator ID is not
authorized to configure the server.
Check the ID, password, and port and
be sure the policy server is configured
and running.
Explanation: Same as text.
Action: Ensure the correct user name, password, and
port are specified.
Name: ammsg_pdacld_not_authorized_conf
Number: 0x30696143 (812212547)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG0327E LDAP client version %s does not
appear to be installed. The LDAP client
must be installed to use the Active
Directory user registry.
Explanation: Same as text.
Action: Same as text.
Name: ammsg_noadldapcwarn
Number: 0x30696147 (812212551)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG0331E The version of the installed %s must
be %s or higher.
Explanation: Same as text.
Action: Same as text.
Action: Same as text.
Name: ammsg_proxydrte
Name: ammsg_oldverldapcrypto
Number: 0x3069612a (812212522)
Number: 0x3069614b (812212555)
Severity: Warning
Severity: Error
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
HPDBG0322E The specified administrator ID is not
authorized to configure the server.
Check the ID, password, and port and
be sure the policy server is configured
and running.
HPDBG0339I %s version %s or higher must be
installed on the system.
Explanation: Same as text.
Name: ammsg_no_max_crypto
Action: Log in as an administrative user and retry the
command.
Number: 0x30696153 (812212563)
Name: ammsg_pdacld_not_authorized
Number: 0x30696142 (812212546)
Severity: Error
100
Error Message Reference
Explanation: Same as text.
Action: Same as text.
Severity: Notice
Component: bcg / pdc_svc_general
HPDBG0348E The environment variable
JAVA_HOME must be set to an existing
valid JRE before executing this
command.
Explanation: JAVA_HOME is necessary to determine
what JRE to use for the process.
Action: Set the JAVA_HOME variable then retry the
command.
Name: ammsg_no_java_home_set
Number: 0x3069615c (812212572)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG0349E The LDAP client package %s, version
%s does not appear to be installed.
Explanation: Same as text.
Action: Install the package and try the command
again.
Name: ammsg_missing_ldap_file
Number: 0x3069615d (812212573)
Severity: Error
HPDBG0358E The management domain name, %s,
already exists within LDAP.
Explanation: The domain name must not already exist
within LDAP.
Action: Retry the command specifying a different
domain name or remove the existing one from LDAP.
Name: ammsg_management_dn_exists
Number: 0x30696166 (812212582)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG0812E An Administrative account must be
used to run this program.
Explanation: The user is not qualified to run the
program.
Action: Log in as an administrative user and retry the
command.
Name: MSG_ISADMIN_CFG
Number: 0x3069632c (812213036)
Severity: Error
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
HPDBG0350E The Tivoli Common Logging directory
cannot be a relative directory.
Explanation: The path is invalid. It must be an
absolute path.
HPDBG0813E Access Manager registry entries could
not be created.
Explanation: A problem was detected while trying to
create entries in the system registry.
Action: Re-enter the directory.
Action: Be sure another process is not accessing the
registry and retry the command.
Name: ammsg_tcd_invalid_relative
Name: MSG_REGISTRY_ERROR
Number: 0x3069615e (812212574)
Number: 0x3069632d (812213037)
Severity: Error
Severity: Error
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
HPDBG0351E The Tivoli Common Logging directory
cannot be created.
HPDBG0826E The %s service failed to start.
Explanation: The path is invalid. It must be an
absolute path and must allow creation.
Action: Re-enter the directory.
Name: ammsg_tcd_invalid
Number: 0x3069615f (812212575)
Severity: Error
Explanation: The service could not be started.
Action: Review log files, the Event Viewer, or other
messages, then retry the command.
Name: MSG_STARTUP_FAILED
Number: 0x3069633a (812213050)
Severity: Error
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
Chapter 1. Tivoli Access Manager Base Messages
101
HPDBG0827E The directory %s could not be created.
Action: The product may need to be reinstalled or the
system registry could be corrupt.
Explanation: The specified directory could not be
created.
Name: MSG_NOPATH
Action: Check the permissions of the parent directory
and disk space, then retry the command.
Name: MSG_DIR_ERR
Number: 0x3069633f (812213055)
Severity: Notice
Component: bcg / pdc_svc_general
Number: 0x3069633b (812213051)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG0828E The unconfiguration of the %s server
failed.
HPDBG0832E The directory %s could not be created.
Explanation: Same as text.
Action: Check permissions on the parent directory
and disk space, then retry the command.
Name: MSG_DIR_CREATE_ERR
Explanation: Same as text.
Number: 0x30696340 (812213056)
Action: Review log files, the Event Viewer, or other
messages, correct the problem, then retry the command.
Severity: Error
Component: bcg / pdc_svc_general
Name: MSG_SERVER_DEL_ERR
Number: 0x3069633c (812213052)
HPDBG0836E Could not create keytab directory: %s
Severity: Error
Explanation: The directory could not be created.
Component: bcg / pdc_svc_general
Action: Check permissions of the parent directory and
disk space, then retry the command.
HPDBG0829W The %s service could not be deleted.
Name: MSG_KEYTAB_DIR_ERR
Explanation: Same as text.
Number: 0x30696344 (812213060)
Action: Review log files, the Event Viewer, or other
messages, correct the problem, then retry the command.
Severity: Error
Component: bcg / pdc_svc_general
Name: MSG_SERVICE_DEL_ERR
Number: 0x3069633d (812213053)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0830E The %s server could not be
configured.
HPDBG0837E Startup of Access Manager Policy
Server failed.
Explanation: Same as text.
Action: Review the logs, Event Viewer, or other
messages, correct the problem, then retry the command.
Name: MSG_IVMGR_STARTUP_FAILED
Explanation: Same as text.
Number: 0x30696345 (812213061)
Action: Review log files, the Event Viewer, or other
messages, correct the problem, then retry the command.
Severity: Error
Component: bcg / pdc_svc_general
Name: MSG_SERVER_CONF_ERR
Number: 0x3069633e (812213054)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG0831I Unable to determine Access Manager
base directory.
Explanation: The command could not determine
where the Access Manager runtime package was
installed.
HPDBG0838E Startup of Access Manager Security
Server failed.
Explanation: Same as text.
Action: Review the logs, Event Viewer, or other
messages, correct the problem, then retry the command.
Name: MSG_IVNET_STARTUP_FAILED
Number: 0x30696346 (812213062)
Severity: Error
Component: bcg / pdc_svc_general
102
Error Message Reference
HPDBG0839E Startup of Access Manager
Authorization Server failed.
HPDBG0844E The %s package must be removed
first.
Explanation: Same as text.
Explanation: Same as text.
Action: Review the logs, Event Viewer, or other
messages, correct the problem, then retry the command.
Action: Remove the specified package, then retry the
command.
Name: MSG_IVACLD_STARTUP_FAILED
Name: MSG_RMV_DEPEND_ERR
Number: 0x30696347 (812213063)
Number: 0x3069634c (812213068)
Severity: Error
Severity: Error
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
HPDBG0840E An error occurred configuring the %s
service.
HPDBG0857W The Access Manager Policy Server is
already configured in this secure
domain. The Access Manager Policy
Server must be removed completely
before installing.
Explanation: Same as text.
Action: Review the logs, Event Viewer, or other
messages, correct the problem, then retry the command.
Name: MSG_SERVICE_CONF_FAILED
Number: 0x30696348 (812213064)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG0841E Could not get configuration
information from the Access Manager
registry.
Explanation: The process could not access the system
registry properly.
Action: The package may need to be reinstalled or the
registry may be corrupt.
Name: MSG_GETREGENTRY_FAILED
Number: 0x30696349 (812213065)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG0843E Could not stop the %s service.
Explanation: Same as text.
Action: Review the logs, Event Viewer, or other
messages, correct the problem, then retry the command.
Name: MSG_STOP_FAILED
Number: 0x3069634b (812213067)
Severity: Error
Component: bcg / pdc_svc_general
Explanation: Same as text.
Action: Same as text.
Name: MSG_IVMGR_EXISTS
Number: 0x30696359 (812213081)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0858W The Access Manager Policy Server
appears to be configured on another
machine in the secure domain. The local
Access Manager Policy Server cannot be
unconfigured.
Explanation: Same as text.
Action: Same as text.
Name: MSG_IVMGR_NOTLOCAL
Number: 0x3069635a (812213082)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0860E GsoInit error 1: Invalid Parameters
Explanation: An invalid parameter was specified.
Action: Correct the parameter and retry the command.
Name: MSG_GSOINIT_INVALID_PARMS
Number: 0x3069635c (812213084)
Severity: Error
Component: bcg / pdc_svc_general
Chapter 1. Tivoli Access Manager Base Messages
103
HPDBG0861W GsoInit error 2: No LDAP Connection
Explanation: The LDAP host could not be reached.
Component: bcg / pdc_svc_general
HPDBG0866W GsoInit error 7: No Suffix
Action: Ensure the information is correct, then retry
the command.
Explanation: The suffix does not exist.
Name: MSG_GSOINIT_NO_LDAP_CONNECTION
Action: Ensure the configuration was successful, then
retry the command.
Number: 0x3069635d (812213085)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0862W GsoInit error 3: Not Authorized
Explanation: The user is not authroized to perform
the task.
Action: Increase the user’s authority or try the
command again as a different user.
Name: MSG_GSOINIT_NOT_AUTHORIZED
Number: 0x3069635e (812213086)
Severity: Warning
Component: bcg / pdc_svc_general
Name: MSG_GSOINIT_NO_SUFFIX
Number: 0x30696362 (812213090)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0867W GsoInit error 8: GSO Database Exists
Explanation: The database could not be created
because it already exists.
Action: Contact your IBM service representative.
Name: MSG_GSOINIT_GSODATABASE_EXISTS
Number: 0x30696363 (812213091)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0863W GsoInit error 4: Object Exists
Explanation: The object that is trying to be created
already exists.
Action: Delete the object then retry the command.
Name: MSG_GSOINIT_OBJECT_EXISTS
Number: 0x3069635f (812213087)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0868W GsoInit error 9: GSO Unrecoverable
Error
Explanation: An unknown error occurred.
Action: Contact your IBM service representative.
Name: MSG_GSOINIT_UNRECOVERABLE_ERROR
Number: 0x30696364 (812213092)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0864W GsoInit error 5: Object Not Found
Explanation: The object could not be found.
HPDBG0869W GsoInit error 10: Can’t get LDAP
Connection
Action: Ensure the configuration was successful, then
retry the command.
Explanation: The LDAP server could not be reached.
Name: MSG_GSOINIT_OBJECT_NOT_FOUND
Action: Ensure the server is running and that the
information is correct, then retry the command.
Number: 0x30696360 (812213088)
Severity: Warning
Name:
MSG_GSOINIT_CANT_GET_LDAP_CONNECTION_
Component: bcg / pdc_svc_general
Number: 0x30696365 (812213093)
Severity: Warning
HPDBG0865W GsoInit error 6: No GSO Database
Component: bcg / pdc_svc_general
Explanation: The GSO database does not exist.
Action: Contact your IBM service representative.
HPDBG0870W GsoInit error 11: Not GSO User
Name: MSG_GSOINIT_NOGSODATABASE
Explanation: The user is not a valid GSO user.
Number: 0x30696361 (812213089)
Action: Retry the command as a valid GSO user.
Severity: Warning
Name: MSG_GSOINIT_NOT_GSO_USER
104
Error Message Reference
Number: 0x30696366 (812213094)
Severity: Warning
HPDBG0909W Not authorized to perform LDAP
operation
Component: bcg / pdc_svc_general
Explanation: The LDAP server denied the request.
HPDBG0905E SBS Unconfiguration Error
Action: Ensure the LDAP administrator id and
password are correct.
Explanation: An error occurred unconfiguring SBS.
Name: MSG_SBS_NOT_AUTHORIZED
Action: Review log files or other messages, then retry
the command.
Number: 0x3069638d (812213133)
Name: MSG_SBS_UNCONFIG_TITLE
Severity: Warning
Component: bcg / pdc_svc_general
Number: 0x30696389 (812213129)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG0906W Cannot connect to the LDAP server.
Explanation: The LDAP server could not be reached.
Action: Ensure the server is running and that the
information is correct, then retry the command.
HPDBG0910W Cannot connect to registry server
using SSL.
Explanation: SSL could not be used to communicate
to the registry server.
Action: Ensure the ports, key file, passowrd, and ids
are correct, and that the registry server can use SSL,
then retry the command.
Name: MSG_SBS_NO_SSL_CONNECTION
Name: MSG_SBS_NO_LDAP_CONNECTION
Number: 0x3069638e (812213134)
Number: 0x3069638a (812213130)
Severity: Warning
Severity: Warning
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
HPDBG0907W Invalid LDAP authentication
Explanation: The LDAP server denied the request.
Action: Ensure the LDAP administrator id and
password are correct.
Name: MSG_SBS_NO_AUTHENTICATION
Number: 0x3069638b (812213131)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0911I Unexpected LDAP error has occurred
(0x%8.8x)
Explanation: An unexpected error was received from
the LDAP API.
Action: Review the messages and logs, correct the
problem, then retry the command.
Name: MSG_SBS_OTHER_ERROR
Number: 0x3069638f (812213135)
Severity: Notice
Component: bcg / pdc_svc_general
HPDBG0908W LDAP server not available
Explanation: Same as text.
Action: Ensure the LDAP server is running and the
ports are correct, then retry the command.
Name: MSG_SBS_SERVER_DOWN
Number: 0x3069638c (812213132)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG0938E Configuration failed.\r
Explanation: The configuration process failed.
Action: Review logs, correct the problem, then retry
the command.
Name: MSG_CONFIG_FAILED
Number: 0x306963aa (812213162)
Severity: Error
Component: bcg / pdc_svc_general
Chapter 1. Tivoli Access Manager Base Messages
105
HPDBG0957E Error attempting to shutdown the
system.
HPDBG0991E URAFCFG environment variable not
set.
Explanation: The system could not be shut down.
Explanation: Same as text.
Action: Shut down and restart the system manually.
Action: Set the variable, then retry the command.
Name: MSG_UNINSTALL_REBOOT_FAIL
Name: MSG_URAFCFG_NOTSET
Number: 0x306963bd (812213181)
Number: 0x306963df (812213215)
Severity: Error
Severity: Error
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
HPDBG0964E ERROR: SecAuthority=Default suffix
not found on LDAP server, please load
secschema.def prior to configuring
Access Manager
HPDBG0992E Notes_ExecDirectory environment
variable not set.
Explanation: The LDAP server configuration may not
be completely finished.
Action: Apply the schema as directed, then retry the
command.
Name: MSG_LOAD_SECSCHEMA
Explanation: Same as text.
Action: Set the variable, then retry the command.
Name: MSG_NOTESEXECDIR_NOTSET
Number: 0x306963e0 (812213216)
Severity: Error
Component: bcg / pdc_svc_general
Number: 0x306963c4 (812213188)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG0993E The Notes install directory is not in
the PATH
Explanation: Same as text.
HPDBG0972W Access Manager Policy Server must
first be upgraded on this system.
Action: Set the PATH to include the Notes install
directory, then retry the command.
Explanation: The policy server must be upgraded
before this package.
Name: MSG_NOTES_NOT_IN_PATH
Action: Upgrade the policy server, then retry the
command.
Severity: Error
Name: MSG_UPGRADEMGRFIRST
Component: bcg / pdc_svc_general
Number: 0x306963cc (812213196)
Number: 0x306963e1 (812213217)
Severity: Warning
HPDBG0994E The EXTMGR_ADDINS parameter is
not set in notes.ini.
Component: bcg / pdc_svc_general
Explanation: Same as text.
HPDBG0973E SecAuthority=Default suffix not found
on LDAP server, Access Manager
initialization of LDAP failed
Action: Set the parameter in the notes.ini file, then
retry the command.
Name: MSG_EXTMGR_NOTIN_INIFILE
Explanation: The LDAP server configuration was not
completed before running this process.
Number: 0x306963e2 (812213218)
Action: Apply the schema on the LDAP server, then
retry this command.
Component: bcg / pdc_svc_general
Name: MSG_NOSUFFIX
Number: 0x306963cd (812213197)
HPDBG0997W The notes.ini file does not exist in
the Windows directory.
Severity: Error
Explanation: Same as text.
Component: bcg / pdc_svc_general
Action: Ensure the product was installed correctly,
then retry the command.
Severity: Error
Name: MSG_NOTEINI_NOTEXISTW
106
Error Message Reference
Number: 0x306963e5 (812213221)
Number: 0x306963ee (812213230)
Severity: Warning
Severity: Error
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
HPDBG0999I Notes does not exist.
HPDBG1007W Could not get the TCP/IP host name
of local machine.
Explanation: The Notes product may not have been
installed properly.
Explanation: Same as text.
Action: Install the product and retry the command.
Action: Contact your IBM service representative.
Name: MSG_NOTES_NOTEXIST
Name: MSG_HOSTNAME_FAIL
Number: 0x306963e7 (812213223)
Number: 0x306963ef (812213231)
Severity: Notice
Severity: Warning
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
HPDBG1002I Could not open file %s. Check to
make sure the file exists and that you
have the proper file permissions.
Name: MSG_FILE_OPEN_FAILURE
HPDBG1010I An error occurred trying to load a
required User Registry module. This
may indicate that a valid User Registry
Client is not properly installed. You will
only be able to do Access Manager
Administration functions on this
workstation. Do you wish to continue
with configuration?
Number: 0x306963ea (812213226)
Explanation: Same as text.
Severity: Notice
Action: Answer Y or N to continue.
Component: bcg / pdc_svc_general
Name: MSG_NOREG_WARN
Explanation: Same as text.
Action: Same as text.
HPDBG1005E Could not contact the LDAP server.
Possible causes are: The LDAP server is
not running. The LDAP server host
name or port is incorrect. There is an
SSL configuration mismatch between
Access Manager and the registry server.
Explanation: Same as text.
Action: Same as text - correct the problem, then retry
the command.
Name: MSG_LDAPSERVER_DOWN
Number: 0x306963ed (812213229)
Severity: Error
Component: bcg / pdc_svc_general
Number: 0x306963f2 (812213234)
Severity: Notice
Component: bcg / pdc_svc_general
HPDBG1032W You are not authorized to update the
schema!
Explanation: Same as text.
Action: Log in as a different user and retry the
command.
Name: MSG_AD_CANNOT_UPDATE
Number: 0x30696408 (812213256)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG1006E Could not contact the Access Manager
Policy Server. Ensure that you have
specified a valid host name and port
number and that Access Manager Policy
Server is started before retrying this
operation.
HPDBG1045I An error occurred trying to load a
required User Registry module.
Explanation: Same as text.
Action: Contact your IBM service representative.
Explanation: Same as text.
Name: MSG_AD_LOADLIB_ERROR
Action: Same as text.
Number: 0x30696415 (812213269)
Name: MSG_PDMGR_DOWN
Severity: Notice
Chapter 1. Tivoli Access Manager Base Messages
107
Component: bcg / pdc_svc_general
HPDBG1055I Active Directory host name can not be
determined.
HPDBG1046I Could not load Get Master Domain
Name routine.
Explanation: Same as text.
Explanation: Same as text.
Action: Ensure that the runtime process has been
successfully configured, then retry the command.
Action: Contact your IBM service representative.
Name: MSG_AD_GETPROCADDR_ERROR
Number: 0x30696416 (812213270)
Severity: Notice
Name: MSG_AD_DOMAIN_ERROR
Number: 0x3069641f (812213279)
Severity: Notice
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
Number: 0x30696417 (812213271)
HPDBG1056W Could not contact the Domino server.
Possible causes are: The Domino server
is not running. The Domino server host
name is incorrect. The Notes client
password is incorrect for the active
Notes ID file. Verify that information
and then unconfigure and reconfigure
the Runtime component with the correct
values.
Severity: Notice
Explanation: Same as text.
Component: bcg / pdc_svc_general
Action: Same as text.
HPDBG1047I Unable to get the address of the
exported function %s from library %s.
Explanation: Same as text.
Action: Contact your IBM service representative.
Name: MSG_AD_GETPROCADDR_ERROR2
Name: MSG_DOMINO_SERVER_DOWN
HPDBG1049W Unable to read necessary files. Make
sure that the read permission is set for
the current user on the following files
located in the directory specified:
ivmgrd.conf, ivmgrd.kdb, ivmgrd.sth,
pdcacert.b64
Number: 0x30696420 (812213280)
Severity: Warning
Component: bcg / pdc_svc_general
Number: 0x30696419 (812213273)
HPDBG1080E Could not contact the Access Manager
Policy Server. Ensure that you have
specified a valid ID, password and
domain name and that Access Manager
Policy Server is started before retrying
this operation.
Severity: Warning
Explanation: Same as text.
Component: bcg / pdc_svc_general
Action: Same as text.
Explanation: Same as text.
Action: Same as text.
Name: MSG_SECONDMGR_READ_ERR
Name: MSG_IVALID_ID_OR_PW
HPDBG1054W Cannot contact the host server.
Possible causes are: The host server is
not running. The host server name is
incorrect.
Number: 0x30696438 (812213304)
Severity: Error
Component: bcg / pdc_svc_general
Explanation: Same as text.
Action: Ensure the server is running and that the
information is correct, then retry the command.
HPDBG1083E Error: Command %s failed: %s (0x%x).
Make sure java is in the path.
Name: MSG_HOST_SERVER
Explanation: See text.
Number: 0x3069641e (812213278)
Action: See text, review logs, correct the problem, then
retry the command.
Severity: Warning
Component: bcg / pdc_svc_general
108
Error Message Reference
Name: MSG_COMMAND_FAILED
Number: 0x3069643b (812213307)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG1096E The environment variable
JAVA_HOME must be set to an existing
valid JRE before executing this
command.
Explanation: JAVA_HOME is necessary to determine
what JRE to use for the process.
Action: Set the JAVA_HOME variable then retry the
command.
Name: MSG_NO_JAVA_HOME_SET
Number: 0x30696448 (812213320)
Severity: Error
HPDBG1099E IBM Tivoli Access Manager License is
not at the required version level.
Explanation: IBM Tivoli Access Manager License must
be at the current level to configure other Access
Manager components.
Action: Reinstall the IBM Tivoli Access Manager
License from the current Access Manager CDs then
retry this command.
Name: MSG_PDLIC_DATASET_BADVERS
Number: 0x3069644b (812213323)
Severity: Error
Component: bcg / pdc_svc_general
Component: bcg / pdc_svc_general
HPDBG1100E IBM Tivoli Access Manager Policy
Server must be unconfigured before it is
removed.
HPDBG1097E The IBM Tivoli Access Manager
License registry key is missing.
Explanation: The policy server must be unconfigured
prior to removal.
Explanation: The current version of IBM Tivoli Access
Manager License must be installed to configure other
Access Manager components.
Action: Unconfigure the policy server and then retry
the removal.
Action: Install IBM Tivoli Access Manager License
from the Access Manager CDs then retry this
command.
Name: MSG_NO_PDLIC_KEY
Name: ammsg_lpp_pol_serv_configed
Number: 0x3069644c (812213324)
Severity: Error
Component: bcg / pdc_svc_general
Number: 0x30696449 (812213321)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG1098E IBM Tivoli Access Manager License is
not installed.
Explanation: The current version of IBM Tivoli Access
Manager License must be reinstalled to configure other
Access Manager components. The registry key may
contain an incorrect ’Path’ or the path doesn’t match
the path returned by the pd_get_path command.
Action: Install IBM Tivoli Access Manager License
from the Access Manager CDs to the same path as the
other Access Manager components then retry this
command.
Name: MSG_NO_PDLIC_DATASET
Number: 0x3069644a (812213322)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG1101E IBM Tivoli Access Manager policy
proxy server must be unconfigured
before it is removed.
Explanation: The policy proxy server must be
unconfigured prior to removal.
Action: Unconfigure the policy proxy server and then
retry the removal.
Name: ammsg_lpp_proxy_serv_configed
Number: 0x3069644d (812213325)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG1102E IBM Tivoli Access Manager
Authorization Server must be
unconfigured before it is removed.
Explanation: The authorization server must be
unconfigured prior to removal.
Action: Unconfigure the authorization server and then
retry the removal.
Name: ammsg_lpp_auth_serv_configed
Number: 0x3069644e (812213326)
Chapter 1. Tivoli Access Manager Base Messages
109
Severity: Error
Component: bcg / pdc_svc_general
HPDBG1104E Could not contact the Active Directory
server. Possible causes are: The Active
Directory server is not running. The
Active Directory Global Catalog server
is not running. The Active Directory
server host name or domain is incorrect.
Explanation: Same as text
Action: Make sure that the Active Directory server or
Active Directory Global Catalog server is running and
that the host name specified is the fully qualified host
name.
Name: MSG_AD_SERVER_CANT_CONTACT
Number: 0x30696450 (812213328)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG1105E The domain name is different from
the local domain and Tivoli Access
Manager Policy Server is installed on
this machine. If the Policy Server is to
be configured on this machine, make
sure the domain is correct. If Tivoli
Access Manager is configured with the
Active Directory multiple domains
option, make sure this domain is the
root of the Active Directory forest.
Policy Server must be installed and
configured on the root domain of the
forest. When using an LDAP client to
communicate with the Active Directory
server for an Access Manager blade
server or user application it’s necessary
to remove the Access Manager Policy
Server package then retry the
configuration.
Explanation: Same as text
Action: If the Policy Server will be configured on this
machine and it is a client of an Active Directory server,
make sure the machine is logged in to the correct
domain. Also note that in order for Tivoli Access
Manager to be configured with Active Directory
multiple domain, the Policy Server must be installed
and configured on the root of the Active Directory
forest or a client machine of that root domain. Correct
the problem and retry.
Name: MSG_AD_INVALID_CONFIG_ENV
Number: 0x30696451 (812213329)
HPDBG1106E Invalid authentication information.
Either the Active Directory admin ID
doesn’t exist or the admin password is
incorrect.
Explanation: Same as text
Action: Correct the user ID and password and retry.
Name: MSG_AD_INVALID_AUTHENTICATION
Number: 0x30696452 (812213330)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG1107E Unable to locate the Active Directory
data location information. Make sure
the Active Directory domain is up and
running or check to make sure the
distinguished name for the data location
exists on the Active Directory server
before using it.
Explanation: The Active Directory data location may
not exist or is not yet created in the Active Directory
server.
Action: Correct the the Active Directory data location
information and retry.
Name: MSG_AD_INVALID_DNFORPD
Number: 0x30696453 (812213331)
Severity: Error
Component: bcg / pdc_svc_general
HPDBG1109I
Tivoli Access Manager policy server
(%s,%s) cannot be contacted or does not
support the FIPS query command.
Explanation: The policy server cannot be contacted
with the specified host and port values or the policy
server does not support the FIPS query.
Action: Ensure that the port and host name are correct
and that the policy server is FIPS enabled, and then
retry the command.
Name: ammsg_noFIPSpdmgr_server
Number: 0x30696455 (812213333)
Severity: Notice
Component: bcg / pdc_svc_general
HPDBG1120E The pdcacert.b64 file could not be
downloaded from the policy server.
Severity: Error
Explanation: The certificate automatic download
failed.
Component: bcg / pdc_svc_general
Action: Make sure the policy server is running.
Name: FAILURE_CERTDL
110
Error Message Reference
Number: 0x30696460 (812213344)
Number: 0x3078d01b (813223963)
Severity: Error
Severity: Error
Component: bcg / pdinst_s_pdinst_util
Component: bin / pdinst_s_pdinst_util
HPDBG1133W The management domain location
DN, %s, was not found in the LDAP
server. Create the location DN on the
LDAP server or specify a different one.
HPDBI0036E Could not change to directory: %s.
Explanation: The user specified a location DN for
private policy server data but the DN does not already
exist on the LDAP server.
Action: Create the location DN on the LDAP server
first, or specify an existing one.
Name: MSG_MANAGEMENT_DN_LOCATION_DNE
Explanation: The directory does not exist or the
permissions are not correct.
Action: Check the permissions and path of the
directory.
Name: pdinst_couldnt_chdir
Number: 0x3078d024 (813223972)
Severity: Error
Component: bin / pdinst_s_pdinst_util
Number: 0x3069646d (812213357)
Severity: Warning
Component: bcg / pdc_svc_general
HPDBG1137E The windows socket library could not
be loaded.
Explanation: An internal error has occurred.
Action: Ensure that windows socket support is
installed and the library directory is in the PATH then
retry the command. If the problem persists, contact
your IBM service representative.
Name: MSG_WINSOCK_LOAD_ERROR
HPDBI0084E %s completed with errors. The exit code
was %s.
Explanation: Indicates that the process finished
unsucsessfully.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: pdinst_ic_complete_with_errors
Number: 0x3078d054 (813224020)
Severity: Error
Component: bin / pdinst_s_pdinst_util
Number: 0x30696471 (812213361)
Severity: Fatal
Component: bcg / pdc_svc_general
HPDBI0026E An error occurred configuring %s.
Explanation: Configuration failed for the component.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
HPDBI0133W The file, %s, did not exist during
GSKit configuration.
Explanation: Message indicating that a non-critical file
was not available on the CD during configuration of
GSKIT.
Action: Contact your IBM service representative.
Name: pdinst_missing_gskit_file
Number: 0x3078d085 (813224069)
Name: pdinst_config_error
Severity: Warning
Number: 0x3078d01a (813223962)
Component: bin / pdinst_s_pdinst_util
Severity: Error
Component: bin / pdinst_s_pdinst_util
HPDBI0134E The ldapdb2 user did not get created.
Aborting the configuration.
HPDBI0027E An error occurred while installing %s.
Explanation: The creation of the ldapdb2 user failed
and configuration cannot continue.
Explanation: The installation of the component failed.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: pdinst_error_installing
Action: Remove the installed LDAP server
components, reboot, and retry the command.
Name: pdinst_no_ldapdb2_user
Number: 0x3078d086 (813224070)
Chapter 1. Tivoli Access Manager Base Messages
111
Severity: Error
Component: bin / pdinst_s_pdinst_util
HPDBI0136E This script only works on: %s.
Explanation: These are the only platforms on which
this process works.
Action: Use this process on one of the listed platforms
only.
Name: pdinst_valid_machine
HPDBI0154I The file, %s, does not exist.
Explanation: An expected installation file does not
exist.
Action: Contact your IBM service representative.
Name: pdinst_not_exist
Number: 0x3078d09a (813224090)
Severity: Notice
Component: bin / pdinst_s_pdinst_util
Number: 0x3078d088 (813224072)
Severity: Error
Component: bin / pdinst_s_pdinst_util
HPDBI0140E Unable to determine the machine type.
Explanation: See message.
Action: Contact your IBM service representative.
Name: pdinst_unknown_machine
Number: 0x3078d08c (813224076)
Severity: Error
Component: bin / pdinst_s_pdinst_util
HPDBI0141E The response file, %s, could not be read.
Explanation: The specified response file could not be
read.
Action: Verify the path and permissions of the
response file and retry the command.
HPDBI0159E Could not load %s.
Explanation: An expected installation file could not be
loaded.
Action: Contact your IBM service representative.
Name: pdinst_failed_load
Number: 0x3078d09f (813224095)
Severity: Error
Component: bin / pdinst_s_pdinst_util
HPDBI0160I The error code was: %d.
Explanation: An error code generated by the program
has been logged.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command. If the problem
persists, contact your IBM service representative.
Name: pdinst_last_error
Name: pdinst_could_not_read_rspfile
Number: 0x3078d0a0 (813224096)
Number: 0x3078d08d (813224077)
Severity: Notice
Severity: Error
Component: bin / pdinst_s_pdinst_util
Component: bin / pdinst_s_pdinst_util
HPDBI0162E Ezinstall failed to complete successfully.
HPDBI0146E You must be the root user to run this
process.
Explanation: An error occurred durnig the ezinstall
process.
Explanation: See message.
Action: Log in as root and retry the command.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: pdinst_root_only
Name: pdinst_completed_error
Number: 0x3078d092 (813224082)
Number: 0x3078d0a2 (813224098)
Severity: Error
Severity: Error
Component: bin / pdinst_s_pdinst_util
Component: bin / pdinst_s_pdinst_util
112
Error Message Reference
HPDBI0163E The file, %s, could not be read.
Explanation: See message.
Action: Check the existence and permissions of the file
and retry the command.
Name: pdinst_read_error
Number: 0x3078d0a3 (813224099)
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: pdinst_migrate_backup_failed
Number: 0x3078d0d7 (813224151)
Severity: Error
Component: bin / pdinst_s_pdinst_util
Severity: Error
Component: bin / pdinst_s_pdinst_util
HPDBI0217W Start the %s and policy servers if they
are not already started.
HPDBI0170E You must have administrator authority
to run this program.
Explanation: The servers must be running before
continuing.
Explanation: The user does not have authority to run
this program.
Action: Start the servers at this time, then continue.
Action: Log in as the administrative user and retry the
command.
Name: pdinst_error_not_admin
Number: 0x3078d0aa (813224106)
Severity: Error
Component: bin / pdinst_s_pdinst_util
Name: pdinst_start_servers
Number: 0x3078d0d9 (813224153)
Severity: Warning
Component: bin / pdinst_s_pdinst_util
HPDBI0222E Ezinstall is not supported on this
platform.
Explanation: See message.
HPDBI0175E The file, %s, could not be created.
Explanation: The file could not be created.
Action: Check the permissions of the directory and
available disk space, then retry the command.
Name: pdinst_failed_create
Number: 0x3078d0af (813224111)
Action: Move to a supported platform and retry the
command.
Name: pdinst_invalid_machine
Number: 0x3078d0de (813224158)
Severity: Error
Component: bin / pdinst_s_pdinst_util
Severity: Error
Component: bin / pdinst_s_pdinst_util
HPDBI0232E Solaris version 2.7 or later is required to
run the LDAP server.
HPDBI0196E The current %s version is %s. %s or
higher is required.
Explanation: See message.
Explanation: The process cannot migrate components
that are too old.
Action: Use the supported version and retry the
command.
Name: pdinst_level_too_low
Number: 0x3078d0c4 (813224132)
Severity: Error
Component: bin / pdinst_s_pdinst_util
HPDBI0215E The backup or restore of the
information failed.
Explanation: The migration process could not be
completed.
Action: Upgrade the operating system and retry the
command.
Name: pdinst_bad_sol_version
Number: 0x3078d0e8 (813224168)
Severity: Error
Component: bin / pdinst_s_pdinst_util
HPDBI0235I Reboot this system and restart this
process.
Explanation: Before the configuration can complete,
the system requires rebooting.
Action: Reboot and restart this process.
Name: pdinst_must_reboot
Number: 0x3078d0eb (813224171)
Chapter 1. Tivoli Access Manager Base Messages
113
Severity: Notice
Component: bin / pdinst_s_pdinst_util
HPDBI0236I To complete the installation and
configuration, the system must be
restarted.
Explanation: Before the configuration can complete,
the system requires restarting.
Action: Restart the system. The process will restart
automatically.
HPDBI0245I Installshield indicated that required
data was not found in the silent install
file.
Explanation: Silent installation failed.
Action: Retry the installation using native installation.
Name: pdinst_iserror_3
Number: 0x3078d0f5 (813224181)
Severity: Notice
Component: bin / pdinst_s_pdinst_util
Name: pdinst_reboot_to_complete
Number: 0x3078d0ec (813224172)
Severity: Notice
Component: bin / pdinst_s_pdinst_util
HPDBI0237E %s could not be removed from the
registry.
HPDBI0246I Installshield indicated not enough
memory was available.
Explanation: Silent installation failed.
Action: Stop all other applications and retry
installation.
Name: pdinst_iserror_4
Explanation: See message.
Number: 0x3078d0f6 (813224182)
Action: Remove the key manually, reboot, and retry
the command.
Severity: Notice
Component: bin / pdinst_s_pdinst_util
Name: pdinst_not_rm_key
Number: 0x3078d0ed (813224173)
Severity: Error
Component: bin / pdinst_s_pdinst_util
HPDBI0243I Installshield indicated a general error.
Explanation: Silent installation failed.
Action: Retry the installation using native installation.
Name: pdinst_iserror_1
Number: 0x3078d0f3 (813224179)
Severity: Notice
Component: bin / pdinst_s_pdinst_util
HPDBI0247I Installshield indicated the response file
does not exist.
Explanation: Silent Installation Failed do to a missing
response file
Action: Retry the installation using native installation.
Name: pdinst_iserror_5
Number: 0x3078d0f7 (813224183)
Severity: Notice
Component: bin / pdinst_s_pdinst_util
HPDBI0248I Installshield indicated it cannot write to
the response file.
Explanation: Silent installation failed.
HPDBI0244I Installshield indicated an invalid mode.
Explanation: Silent installation failed.
Action: Retry the installation using native installation.
Name: pdinst_iserror_2
Number: 0x3078d0f4 (813224180)
Action: Retry the installation using native installation.
Name: pdinst_iserror_6
Number: 0x3078d0f8 (813224184)
Severity: Notice
Component: bin / pdinst_s_pdinst_util
Severity: Notice
Component: bin / pdinst_s_pdinst_util
HPDBI0249I Installshield indicated it was unable to
write to the log file.
Explanation: Silent installation failed.
Action: Retry the installation using native installation.
Name: pdinst_iserror_7
114
Error Message Reference
Number: 0x3078d0f9 (813224185)
Severity: Notice
HPDBI0254I Installshield indicated the dialog boxes
are out of order.
Component: bin / pdinst_s_pdinst_util
Explanation: Silent installation failed.
Action: Retry the installation using native installation.
HPDBI0250I Installshield indicated an invalid path
to the Installshield silent response file.
Explanation: Silent installation failed.
Action: Retry the installation using native installation.
Name: pdinst_iserror_8
Number: 0x3078d0fa (813224186)
Name: pdinst_iserror_12
Number: 0x3078d0fe (813224190)
Severity: Notice
Component: bin / pdinst_s_pdinst_util
Severity: Notice
HPDBI0255I Installshield indicated it could not
create the specified folder.
Component: bin / pdinst_s_pdinst_util
Explanation: Silent installation failed.
Action: Retry the installation using native installation.
HPDBI0251I Installshield indicated an invalid list
type (string or number).
Explanation: Silent installation failed.
Action: Retry the installation using native installation.
Name: pdinst_iserror_9
Number: 0x3078d0fb (813224187)
Name: pdinst_iserror_51
Number: 0x3078d0ff (813224191)
Severity: Notice
Component: bin / pdinst_s_pdinst_util
Severity: Notice
HPDBI0256I Installshield indicated it could not
access the specified file or folder.
Component: bin / pdinst_s_pdinst_util
Explanation: Silent installation failed.
Action: Retry the installation using native installation.
HPDBI0252I Installshield indicated the data type is
invalid.
Explanation: Silent installation failed.
Action: Retry the installation using native installation.
Name: pdinst_iserror_10
Number: 0x3078d0fc (813224188)
Name: pdinst_iserror_52
Number: 0x3078d100 (813224192)
Severity: Notice
Component: bin / pdinst_s_pdinst_util
Severity: Notice
HPDBI0257I Installshield indicated an invalid option
was selected.
Component: bin / pdinst_s_pdinst_util
Explanation: Silent installation failed.
Action: Retry the installation using native installation.
HPDBI0253I Installshield indicated an unknown
error during setup.
Explanation: Silent installation failed.
Action: Retry the installation using native installation.
Name: pdinst_iserror_11
Number: 0x3078d0fd (813224189)
Name: pdinst_iserror_53
Number: 0x3078d101 (813224193)
Severity: Notice
Component: bin / pdinst_s_pdinst_util
Severity: Notice
HPDBI0258I Installshield provided an unknown
error code %d.
Component: bin / pdinst_s_pdinst_util
Explanation: Silent installation failed.
Action: Retry the installation using native installation.
Name: pdinst_iserror_unknown
Number: 0x3078d102 (813224194)
Severity: Notice
Chapter 1. Tivoli Access Manager Base Messages
115
Component: bin / pdinst_s_pdinst_util
HPDBI0263E Cannot upgrade the LDAP client. A
previous version of the server exists.
Explanation: A previous version of the LDAP server
exists on this machine.
Action: Upgrade the LDAP server on this machine
before continuing.
Name: pdinst_cant_upgrade_ldap
HPDBI0275I The server, %s, could not be accessed.
Explanation: The host name entered may be invalid.
Action: Verify the host name entered and make sure it
is running the software.
Name: pdinst_server_not_found
Number: 0x3078d113 (813224211)
Severity: Notice
Component: bin / pdinst_s_pdinst_util
Number: 0x3078d107 (813224199)
Severity: Error
Component: bin / pdinst_s_pdinst_util
HPDBI0264E Upgrade the server first, then retry the
command.
Explanation: A previous version of the server exists
on this machine.
Action: Upgrade the LDAP server on this machine
before continuing.
Name: pdinst_upgrade_server_first
HPDBI0276E Check that the server is configured
properly and running.
Explanation: Inform the user that the host name
specified was invalid.
Action: Check the host name entered and make sure it
is running the software.
Name: pdinst_check_server
Number: 0x3078d114 (813224212)
Severity: Error
Component: bin / pdinst_s_pdinst_util
Number: 0x3078d108 (813224200)
Severity: Error
HPDBI0283E The %s server did not start properly.
Component: bin / pdinst_s_pdinst_util
Explanation: A problem prevented the server from
starting.
HPDBI0266E Cannot upgrade Tivoli Access Manager
runtime because a previous version of
the policy server exists.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Explanation: See message.
Name: pdinst_server_start_err
Action: Upgrade the policy server then retry the
command.
Number: 0x3078d11b (813224219)
Name: pdinst_cant_upgrade_pdmgr
Severity: Error
Component: bin / pdinst_s_pdinst_util
Number: 0x3078d10a (813224202)
Severity: Error
Component: bin / pdinst_s_pdinst_util
HPDBI0274I Could not ping the host: %s.
Explanation: The host name may be invalid.
Action: Verify the host name entered and make sure it
is correct. If correct, continue, otherwise re-enter the
host name
Name: pdinst_cant_ping
Number: 0x3078d112 (813224210)
Severity: Notice
Component: bin / pdinst_s_pdinst_util
116
Error Message Reference
HPDBI0285E An error occurred while installing %s
patches.
Explanation: The patch could not be installed due to
an error.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: pdinst_error_installing_patch
Number: 0x3078d11d (813224221)
Severity: Error
Component: bin / pdinst_s_pdinst_util
HPDCF0002E A memory allocation error resulted in
the termination of the program. Check
the maximum allowable memory and
the amount of system paging space as
these may both need to be increased.
Explanation: See message.
Action: Increase the maximum allowable memory and
the system paging space or shut down one or more
applications.
HPDCF0006E The file, %s, could not be modified.
Ensure that file exists and that the file
permissions allow write access.
Explanation: See message.
Action: Make sure the file exists and that the
permissions are set so this process can access it.
Name: pd_file_write_failure
Number: 0x15e3a006 (367239174)
Name: pd_malloc_failure
Severity: Error
Number: 0x15e3a002 (367239170)
Component: pdc / pd_svc_general
Severity: Error
Component: pdc / pd_svc_general
HPDCF0003E The file, %s, could not be opened.
Ensure that file exists and that the file
permissions allow access.
HPDCF0009E The installation directory could not be
determined. Ensure that the product is
installed correctly.
Explanation: See message.
Action: Reinstall the product.
Explanation: See message.
Name: pd_path_null
Action: Make sure the file exists and that the
permissions are set so this process can access it.
Number: 0x15e3a009 (367239177)
Name: pd_file_open_failure
Severity: Error
Component: pdc / pd_svc_general
Number: 0x15e3a003 (367239171)
Severity: Error
Component: pdc / pd_svc_general
HPDCF0004E The file, %s, could not be read. Ensure
that file exists and that the file
permissions allow read access.
HPDCF0033E The file, %s, is in use. You must stop
the server or application before using
this command.
Explanation: An attempt was made to modify the
configuration of an active server application.
Action: Stop the server and retry the command.
Explanation: See message.
Name: pd_file_inuse
Action: Make sure the file exists and that the
permissions are set so this process can access it.
Number: 0x15e3a021 (367239201)
Name: pd_file_read_failure
Severity: Error
Component: pdc / pd_svc_general
Number: 0x15e3a004 (367239172)
Severity: Error
HPDCF0051E The file, %s, was not found.
Component: pdc / pd_svc_general
Explanation: See message.
HPDCF0005E The current time could not be
obtained.
Explanation: See message.
Action: Check the path to the file, its permissions, fix
the problem then retry the command.
Name: pd_missing_file
Number: 0x15e3a033 (367239219)
Action: Retry the command and if the problem
persists, contact your IBM service representative.
Severity: Error
Name: pd_gettime_failed
Component: pdc / pd_svc_general
Number: 0x15e3a005 (367239173)
Severity: Error
Component: pdc / pd_svc_general
Chapter 1. Tivoli Access Manager Base Messages
117
HPDCF0052E The request to change the key file
password failed.
Explanation: An internal error has occurred or access
to perform the operation was denied.
Action: Ensure that the administrator ID being used to
permorm this cmmand has authority.
Name: pd_chgpwd_failure
Number: 0x15e3a034 (367239220)
Severity: Error
Component: pdc / pd_svc_general
HPDCF0053E The request to renew the server
certificate failed.
Explanation: An internal error has occurred or access
to perform the operation was denied.
Action: Ensure that the administrator ID being used to
permorm this cmmand has authority.
Name: pd_chgcert_failure
Number: 0x15e3a035 (367239221)
Severity: Error
Component: pdc / pd_svc_general
HPDCF0057E A replica entry for the specified host
name already exists in the configuration
file.
Explanation: An attempt was made to add an
authorization server replica that already exists in the
specified configuration file.
Action: If the replica name was incorrectly specified,
retry the command specifying the correct name.
Name: pd_replica_exists
Number: 0x15e3a039 (367239225)
Severity: Error
Component: pdc / pd_svc_general
HPDCF0058E A replica entry for the specified host
name was not found in the
configuration file.
Explanation: An attempt was made to change an
authorization server replica that does not exist in the
specified configuration file.
Action: Retry the command specifying the correct
parameters.
Name: pd_replica_notfound
Number: 0x15e3a03a (367239226)
HPDCF0054E An operating system function for
obtaining the local TCP/IP host name
has failed. The error code is %d.
Explanation: See message text.
Action: Ensure that the TCP/IP host name of the
system is properly configured and retry the command.
Name: pd_hostname_failure
Number: 0x15e3a036 (367239222)
Severity: Error
Component: pdc / pd_svc_general
Severity: Error
Component: pdc / pd_svc_general
HPDCF0059E A replica entry in the configuration
file is corrupted.
Explanation: The configuration file contains invalid
data.
Action: First unconfigure then reconfigure the server
application and then retry the command.
Name: pd_replica_bad
Number: 0x15e3a03b (367239227)
HPDCF0055E Socket initialization failed. The error
code is %d.
Explanation: Unable to initialize a necessary socket
communication.
Action: Retry the operation and if the problem
persists, contact your IBM service representative.
Name: pd_socket_failure
Number: 0x15e3a037 (367239223)
Severity: Error
Component: pdc / pd_svc_general
Severity: Error
Component: pdc / pd_svc_general
HPDCF0060E The user registry type cannot be
determined. Ensure that Tivoli Access
Manager runtime is properly installed
and configured.
Explanation: Unable to determine the registry type.
Action: Reconfigure Tivoli Access Manager runtime.
Name: pd_no_registry
Number: 0x15e3a03c (367239228)
Severity: Error
118
Error Message Reference
Component: pdc / pd_svc_general
Number: 0x15e3a04f (367239247)
Severity: Error
HPDCF0061E The function, %s, returned the error
code: 0x%8.8lx.
Explanation: An internal error has occurred.
Action: Retry the command and if the problem
persists, contact your IBM service representative.
Name: pd_keyapi_error
Number: 0x15e3a03d (367239229)
Severity: Error
Component: pdc / pd_svc_general
HPDCF0062E Could not connect to the Tivoli Access
Manager policy server. Error code is
0x%8.8lx. Ensure that the policy server
host name, port and local domain name
are correct.
Explanation: The policy server may not be properly
configured or is not started.
Action: Ensure that the policy server is properly
configured and started and retry the command.
Name: pd_ivmgr_error
Component: pdc / pd_svc_general
HPDCF0084E File ″%s″ is missing essential
information. You must first use the
-config action to create the initial
configuration file.
Explanation: See message.
Action: Specify a valid configuration file or use the
-config action to create one.
Name: pd_invalid_cfg
Number: 0x15e3a054 (367239252)
Severity: Error
Component: pdc / pd_svc_general
HPDCF0085E The configuration file ″%s″ is not
valid. Ensure that Tivoli Access
Manager runtime is properly
configured.
Explanation: See message.
Number: 0x15e3a03e (367239230)
Action: Ensure that the Tivoli Access Manager runtime
is properly configured.
Severity: Error
Name: pd_pdrte_nocfg
Component: pdc / pd_svc_general
Number: 0x15e3a055 (367239253)
Severity: Error
HPDCF0074E The keyring database files already
exist. This indicates that the server
might already be configured or partially
configured.
Explanation: See message.
Action: The server must first be unconfigured before
retrying this command.
Name: pd_unexpected_file
Number: 0x15e3a04a (367239242)
Severity: Error
Component: pdc / pd_svc_general
Component: pdc / pd_svc_general
HPDCF0086E The configured user registry type is
not supported.
Explanation: See message.
Action: Ensure that the Tivoli Access Manager runtime
is properly configured.
Name: pd_unsupported_registry
Number: 0x15e3a056 (367239254)
Severity: Error
Component: pdc / pd_svc_general
HPDCF0079E SSL configuration failed. The error
code is 0x%8.8lx.
Explanation: The command failed. This message is
preceded by other messages that more fully describe
the cause of the failure.
Action: Refer to previous messages that have
appeared on the screen for more details. Fix the
problem and then retry the command.
Name: pd_complete_err
HPDCF0101E Configuration cannot be performed for
server ″%s″. File ″%s″ already exists.
The server might already be configured.
Explanation: See message.
Action: The server must first be unconfigured before it
can be reconfigured.
Name: pd_file_exists
Number: 0x15e3a065 (367239269)
Chapter 1. Tivoli Access Manager Base Messages
119
Severity: Error
Number: 0x15e3a076 (367239286)
Component: pdc / pd_svc_general
Severity: Error
Component: pdc / pd_svc_general
HPDCF0104W This usage is deprecated. Refer to the
help for the correct usage of this
command.
Explanation: A usage error has occurred.
Action: Type the command and action to see the
command help.
Name: pd_cfg_obsolete
Number: 0x15e3a068 (367239272)
Severity: Warning
Component: pdc / pd_svc_general
HPDCF0120E An application server with the
specified name is already configured.
You must use a different name or
unconfigure the existing application
Explanation: See message.
Action: The server must first be unconfigured before
retrying the command.
Name: pd_already_cfg
Number: 0x15e3a078 (367239288)
Severity: Error
HPDCF0116E The keyring database or file, %s, could
not be modified. Ensure that file exists
and that the file permissions allow write
access.
Component: pdc / pd_svc_general
Explanation: See message.
HPDCF0122E If listen mode is enabled, the listening
port must be specified with the -r
parameter.
Action: Make sure the file exists and that the
permissions are set so this process can access it.
Explanation: A port parameter is required when
listening mode is enabled.
Name: pd_kdb_write_failure
Action: Specify the missing port parameter.
Number: 0x15e3a074 (367239284)
Name: pd_cfg_badport1
Severity: Error
Number: 0x15e3a07a (367239290)
Component: pdc / pd_svc_general
Severity: Error
HPDCF0117E An error occurred in the ″IKeyMan″
API. Configuration failed.
Explanation: An internal error has occurred.
Action: Retry the command and if the problem
persists, contact your IBM Service representative.
Name: pd_kdb_apierror
Number: 0x15e3a075 (367239285)
Severity: Error
Component: pdc / pd_svc_general
Component: pdc / pd_svc_general
HPDCF0123E The currently configured SSL listening
port number cannot be zero if listening
mode is enabled.
Explanation: See message.
Action: Configure a listening port before enabling
listening mode or disable listening mode.
Name: pd_cfg_badport2
Number: 0x15e3a07b (367239291)
Severity: Error
HPDCF0118E Configuration failed. The specified
configuration file does not exist or you
do not have the proper permissions to
access the configuration file.
Explanation: The specified configuration file is
invalid.
Action: Ensure that the configuration file exists and
that you have the required permissions to write to the
file.
Name: pd_cfgfile_error
120
Error Message Reference
Component: pdc / pd_svc_general
HPDCF0126W The Tivoli Access Manager policy
server has been configured to disallow
downloading of its CA certificate. A root
CA certificate base64 file must be
available on the local machine in order
to configure.
Explanation: See message.
Action: Contact your Tivoli Access Manager
administrator to obtain the secure domain’s root CA
certificate. This file was saved as ″pdcacert.b64″ when
the policy server was configured. Retry the command
specifying the location of the ″pdcacert.b64″ file on
your local machine.
Name: pd_mgr_not_responding
Name: pd_cacert_download_disabled
Component: pdc / pd_svc_general
Number: 0x15e3a085 (367239301)
Severity: Error
Number: 0x15e3a07e (367239294)
Severity: Warning
Component: pdc / pd_svc_general
HPDCF0127E Download of the root CA certificate
failed. Ensure that the Tivoli Access
Manager policy server host and port are
specified correctly and that the correct
version of the policy server is
configured and running properly.
Explanation: Unable to download the root CA
certificate file.
Action: Be sure the policy server is configured to
allow automatic download of this file and that the
specified host and ports are correct.
HPDCF0134E A listening port number of zero is
allowed only if the ″[aznapi-adminservices]″ stanza in the configuration
file is empty.
Explanation: An invalid value was detected in the
configuration files.
Action: Either specify a non-zero port number or edit
the configuration file to remove the
″[aznapi-admin-services]″ stanza before retrying the
command.
Name: pd_cfg_badport3
Number: 0x15e3a086 (367239302)
Severity: Error
Component: pdc / pd_svc_general
Name: pd_cacert_download_failure
Number: 0x15e3a07f (367239295)
Severity: Error
Component: pdc / pd_svc_general
HPDCF0129W The value ″%s″ of
″ca-cert-download-enabled″ keyword in
ivmgrd.conf file is incorrect. Acceptable
values are ″yes″ or ″no″. Downloading
of the secure domain’s root CA
certificate is disabled.
Explanation: See message.
Action: If the root CA certifcate downloading is
desired, edit the ivmgrd.conf file and correct the
ca-cert-download-enabled parameter to ″yes″ or ″no″,
then restart the policy server.
Name: pd_cacert_download_invalid_conf
Number: 0x15e3a081 (367239297)
Severity: Warning
Component: pdc / pd_svc_general
HPDCF0133E The Tivoli Access Manager policy
server is not responding. Verify the host
name and port, and verify that the
server is started.
HPDCF0140E The keyring database could not be
located using the specified configuration
file.
Explanation: Either the wrong configuration file was
specified, it contains invalid data or the keyring
database does not exist.
Action: Ensure that the specified configuration file is
correct or unconfigure and reconfigure the application.
Name: pd_invalid_config
Number: 0x15e3a08c (367239308)
Severity: Error
Component: pdc / pd_svc_general
HPDCF0157E The specified configuration file does
not exist or you do not have the proper
permissions to access the file.
Explanation: The specified configuration file cannot be
opened.
Action: Ensure that the configuration file exists and
that you have the required permissions to write to the
file.
Name: am_cfgfile_noperms
Number: 0x15e3a09d (367239325)
Explanation: See message.
Severity: Error
Action: Start the policy server then retry the
command, and ensure that the port and host name was
entered correctly.
Component: pdc / pd_svc_general
Chapter 1. Tivoli Access Manager Base Messages
121
HPDCF0158E The specified stanza/key pair does not
exist in the specified configuration file.
Explanation: The specified stanza/key pair is invalid.
They do not exist in the given configuration file.
Action: Ensure that the specified stanza/key pair are
valid values.
Name: am_configfile_missing_property
Number: 0x15e3a09e (367239326)
Severity: Error
Component: pdc / pd_svc_general
HPDCF0163I The FIPS mode entry, ssl-enable-fips in
the ssl stanza, is not set in the Tivoli
Access Manager Runtime configuration
file, pd.conf.
Explanation: Under normal configuration conditions,
this value is always set in pd.conf. If found to be unset,
ssl-enable-fips has a default value of no.
Action: Make sure that the ssl-enable-fips entry is set
in pd.conf or reconfigure the Tivoli Access Manager
Runtime.
Name: pd_cfg_fips_not_set
Number: 0x15e3a0a3 (367239331)
HPDCF0159E The specified configuration file may
be corrupted.
Explanation: The specified configuration file is
invalid.
Action: Ensure that the configuration file is a valid
stanza-based file.
Name: am_cfgfile_missing_property
Number: 0x15e3a09f (367239327)
Severity: Error
Component: pdc / pd_svc_general
Severity: Notice
Component: pdc / pd_svc_general
HPDCF0164E Configuration failed. An error occurred
creating the specified DN, accessing a
configuration file, or setting up the
keyfile.
Explanation: An error occurred in relation to creating
the DN.
Action: Ensure that the configuration file exists, that
you have the required permissions to write to the file,
and that the DN does not already exist.
HPDCF0160E Unknown error occurred while reading
and writing to the configuration file.
Name: pd_dn_creation_error
Explanation: The specified configuration file is
invalid.
Severity: Error
Action: Ensure that the configuration file is a valid
stanza-based file.
Name: am_cfgfile_unknown_error
Number: 0x15e3a0a0 (367239328)
Severity: Error
Component: pdc / pd_svc_general
HPDCF0161E The configuration file is missing
essential information.
Explanation: The configuration file does not contain
information required to perform the command. The
configuration file is not valid or the application must
be configured.
Action: Specify a valid configuration file or use the
-config action to create one.
Name: pd_invalid_cfg2
Number: 0x15e3a0a1 (367239329)
Severity: Error
Component: pdc / pd_svc_general
122
Error Message Reference
Number: 0x15e3a0a4 (367239332)
Component: pdc / pd_svc_general
HPDCF0165E Cannot display configuration file
information from the obfuscated version
of the file.
Explanation: The specified stanza/key pair cannot be
displayed because the pair is in the obfuscated version
of the configuration file.
Action: None
Name: am_configfile_obfvalue_not_display
Number: 0x15e3a0a5 (367239333)
Severity: Error
Component: pdc / pd_svc_general
HPDCF0166E
Cannot modify information in the
specified version of the configuration
file because it exists in the alternate
version.
Explanation: If a stanza/key/value exists in the
obfuscated config file then trying to modify it in the
non-obfuscated config file is not allowed. The same
restriction applies to modifying a stanza/key/value in
the non-obfuscated config file, that already exists in the
obfuscated config file
HPDCO0158E Could not set process rlimit.
Action: Remove the stanza/key/value from the
appropriate config file before setting a new value to the
alternate config file
Explanation: The UNIX® process attempted to set it’s
ulimit values for the number of file handles and on
some platforms the virtual memory size. If the
operating system has set hard ulimits smaller than the
ones requested then it could fail.
Name: am_configfile_not_modifed
Number: 0x15e3a0a6 (367239334)
Severity: Error
Component: pdc / pd_svc_general
Action: Increase relevant operating system kernel
specific limits.
Name: iv_s_failed_init_rlimit
Number: 0x1354a09e (324313246)
HPDCO0150E Caught signal (%d).
Severity: Error
Explanation: The process has received a signal to
terminate.
Component: ivc / ivcore_s_general
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
HPDCO0161E Server is already running (PID %d).
Name: iv_s_signal_caught
Number: 0x1354a096 (324313238)
Severity: Fatal
Component: ivc / ivcore_s_general
Explanation: The specified server is already running.
Action: No action is required.
Name: iv_s_server_already_running
Number: 0x1354a0a1 (324313249)
Severity: Error
Component: ivc / ivcore_s_general
HPDCO0154E Could not open configuration file (%s,
%d).
Explanation: An error occurred while trying to open
the specified configuration file.
Action: Verify that the specified configuration file
exists. If the problem persists, contact your IBM service
representative.
Name: iv_s_stanza_open
Number: 0x1354a09a (324313242)
Severity: Error
Component: ivc / ivcore_s_general
HPDCO0156E Configuration item missing (%s, %s).
Explanation: A configuration item is missing.
Action: Restore the missing information and retry the
operation.
Name: iv_s_config_item_missing
Number: 0x1354a09c (324313244)
Severity: Error
Component: ivc / ivcore_s_general
HPDCO0162E Could not create PID file (%s, %d)
Explanation: The program could not create the file,
specified in the message text. The reason can be
determined in more detail from the error number, also
found in the error text. On UNIX the meaning of this
error code can typically be found in
/usr/include/sys/errno.h. On Windows®, contact
technical support as the included files are not shipped
with the operating system. Typical problems might be
insufficient privileges, or lack of disk space.
Action: Check the ownership and permissions on the
file, or directory containing the file, allow the process
to create or recreate it . Check there is sufficient disk
space on the file system/partition to contain the file.
Name: iv_s_failed_pid_file
Number: 0x1354a0a2 (324313250)
Severity: Error
Component: ivc / ivcore_s_general
HPDCO0163E Could not become background process
(%d).
Explanation: An error occurred while trying to start
the process in the background.
Action: Reallocate system resources and retry the
operation. Check your operating system documentation
and try to increase the number of processes allowed on
Chapter 1. Tivoli Access Manager Base Messages
123
the system. If the problem persists, contact your IBM
service representative.
Name: iv_s_cant_background
Number: 0x1354a0a3 (324313251)
Severity: Error
Component: ivc / ivcore_s_general
HPDCO0170E Could not change process UID (%s)
Explanation: The server failed to change the processes
user ID to the one specified. This can happen if the
server does not have the privileges required.
Action: Start the server as root or change the owner of
the program to root and set the ’s’ bit in it’s perms.
Name: iv_s_change_unix_user
HPDCO0164W Could not start background process
Number: 0x1354a0aa (324313258)
Explanation: Insufficient system resources.
Severity: Error
Action: Reallocate system resources and retry the
operation.
Component: ivc / ivcore_s_general
Name: iv_s_failed_child_startup
HPDCO0174E Could not change the working
directory (errno %d).
Number: 0x1354a0a4 (324313252)
Severity: Warning
Component: ivc / ivcore_s_general
Explanation: Failed to change the working directory.
Action: Check that the directory can be accessed.
Name: iv_s_failed_change_directory
HPDCO0167E Invalid UNIX user name (%s)
Number: 0x1354a0ae (324313262)
Explanation: An invalid UNIX user name was used.
Severity: Error
Action: Use a valid UNIX user name.
Component: ivc / ivcore_s_general
Name: iv_s_unknown_unix_user
Number: 0x1354a0a7 (324313255)
HPDCO0177E Could not duplicate file descriptor
(errno %d).
Severity: Error
Explanation: An internal error has occurred.
Component: ivc / ivcore_s_general
Action: Reallocate system resources and retry the
operation. Terminate other process or handles. If the
problem persists, contact your IBM service
representative.
HPDCO0168E Invalid UNIX group name (%s)
Explanation: An invalid UNIX group was used.
Action: Use a valid UNIX group.
Name: iv_s_unknown_unix_group
Number: 0x1354a0a8 (324313256)
Severity: Error
Name: iv_s_failed_dup_fd
Number: 0x1354a0b1 (324313265)
Severity: Error
Component: ivc / ivcore_s_general
Component: ivc / ivcore_s_general
HPDCO0181E %s: Missing [%s] setting: %s, %s, %s,
or %s.
HPDCO0169E Could not change process GID (%s)
Explanation: An LDAP setting is missing from the
policy server configuration file.
Explanation: The server failed to change the processes
group ID to the one specified. This can happen if the
server does not have the privileges required.
Action: Start the server as root or change the owner of
the program to root and set the ’s’ bit in it’s perms.
Action: Edit the policy server configuration file and
restore the missing LDAP values. If the values can not
be restored, reconfigure the management server.
Name: iv_missing_ldap_setting
Name: iv_s_change_unix_group
Number: 0x1354a0b5 (324313269)
Number: 0x1354a0a9 (324313257)
Severity: Error
Severity: Error
Component: ivc / ivcore_s_general
Component: ivc / ivcore_s_general
124
Error Message Reference
HPDCO0182E LDAP initialization failed:
ira_rgy_init(″%s″, %d, ″%s″, ***) = %d,
%d.
Explanation: The LDAP client initialization has failed.
This can mean that the LDAP server cannot be
contacted, or can be due to an authentication failure.
Action: Ensure that the LDAP server is properly
configured and is up and running
Name: iv_ldap_init_failed
Number: 0x1354a0b6 (324313270)
Severity: Error
HPDCO0186E Unable to setup a connection to the
LDAP server.
Explanation: The LDAP client initialization has failed.
This can mean that the LDAP server cannot be
contacted, or can be due to an authentication failure.
Action: Ensure that the LDAP server is properly
configured and is up and running
Name: iv_s_ldap_init_failed
Number: 0x1354a0ba (324313274)
Severity: Error
Component: ivc / ivcore_s_general
Component: ivc / ivcore_s_general
HPDCO0183E Could not load shared library.
HPDCO0188E Invalid LDAP ’replica’ entry ″%s″ in
config file.
Explanation: An runtime error has occurred while
attempting to load a shared library. This can be due to
an Access Manager installation or configuration error.
Explanation: The format of the entry should be
’replica=host,port,type,pref’. ’type’ is one of ’readonly’
or ’readwrite’. ’pref’ is a number from 1 to 10.
Action: Check the configuration logs to ensure that
Access Manager has been installed and configured
without errors.
Action: Edit the configuration file and correct error in
the ’replica’ entry.
Name: iv_s_shlib_load_failed
Number: 0x1354a0b7 (324313271)
Severity: Error
Name: iv_ldap_replica_entry_invalid
Number: 0x1354a0bc (324313276)
Severity: Error
Component: ivc / ivcore_s_general
Component: ivc / ivcore_s_general
HPDCO0184E Invalid shared library handle.
Explanation: An runtime error has occurred while
attempting to unload a shared library.
Action: No action is required.
Name: iv_s_shlib_handle_invalid
Number: 0x1354a0b8 (324313272)
Severity: Error
Component: ivc / ivcore_s_general
HPDCO0185E Could not resolve symbol.
Explanation: An runtime error has occurred while
attempting to resolve a symbol in a shared library. This
can be due to a library mismatch, possibly due to an
incomplete installation or configuration.
Action: Check the configuration logs to ensure that
Access Manager has been installed and configured
without errors.
Name: iv_s_shlib_resolve_failed
Number: 0x1354a0b9 (324313273)
Severity: Error
HPDCO0190E Unable to configure LDAP replica
″%s″ into server, error code=0x%x.
Explanation: An attempt to configure a replica LDAP
server into Access Manager has failed. This can mean
that the replica LDAP server cannot be contacted.
Action: Ensure that the replica LDAP server is
configured and running
Name: iv_ldap_replica_cannot_be_configured_
Number: 0x1354a0be (324313278)
Severity: Error
Component: ivc / ivcore_s_general
HPDCO0192W LDAP server %s has failed.
Explanation: An attempt to contact an LDAP server
has failed.
Action: Ensure that the LDAP server is configured
and running properly.
Name: iv_ldap_server_failed
Number: 0x1354a0c0 (324313280)
Severity: Warning
Component: ivc / ivcore_s_general
Component: ivc / ivcore_s_general
Chapter 1. Tivoli Access Manager Base Messages
125
HPDCO0193W LDAP server %s has recovered.
Explanation: Contact with the LDAP server has been
re-established.
Number: 0x1354a0c5 (324313285)
Severity: Warning
Component: ivc / ivcore_s_general
Action: No action is required.
Name: iv_ldap_server_recovered
Number: 0x1354a0c1 (324313281)
HPDCO0198W LDAP compare request to %s timed
out after %d seconds.
Severity: Warning
Explanation: A compare request to the named LDAP
server timed out.
Component: ivc / ivcore_s_general
Action: Check the status of the identified server.
Name: iv_ldap_compare_timed_out
HPDCO0194E An internal error has occurred.
Explanation: An internal error has occurred.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_internal_error
Number: 0x1354a0c2 (324313282)
Severity: Fatal
Component: ivc / ivcore_s_general
HPDCO0195E Error occured when reading
configuration file (%s).
Number: 0x1354a0c6 (324313286)
Severity: Warning
Component: ivc / ivcore_s_general
HPDCO0199W Could not upgrade configuration file
%s.
Explanation: Automatic upgrade failed. Most likely
cause is the process does not have permissions to write
to the configuration file.
Action: None required. Program operation will
continue normally.
Name: iv_s_upgrade_failed
Explanation: See message.
Number: 0x1354a0c7 (324313287)
Action: Check syntax of the configuration file
Severity: Warning
Name: iv_s_config_item_error
Component: ivc / ivcore_s_general
Number: 0x1354a0c3 (324313283)
Severity: Error
HPDCO0203E %s: Missing [%s] setting: %s.
Component: ivc / ivcore_s_general
Explanation: An LDAP setting is missing from the
specified configuration file.
HPDCO0196W LDAP bind request to %s timed out
after %d seconds.
Action: Edit the configuration file and restore the
missing LDAP values. If the values can not be restored,
reconfigure the management server.
Explanation: A bind request to the named LDAP
server timed out.
Name: iv_missing_ldap_setting1
Action: Check the status of the identified server.
Name: iv_ldap_bind_timed_out
Number: 0x1354a0c4 (324313284)
Severity: Warning
Component: ivc / ivcore_s_general
Number: 0x1354a0cb (324313291)
Severity: Error
Component: ivc / ivcore_s_general
HPDCO0450E Could not create new thread (%d).
Explanation: An internal system resource failed.
HPDCO0197W LDAP search request to %s timed out
after %d seconds.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Explanation: A search request to the named LDAP
server timed out.
Name: iv_s_failed_pthread_create
Action: Check the status of the identified server.
Name: iv_ldap_search_timed_out
126
Error Message Reference
Number: 0x1354a1c2 (324313538)
Severity: Error
Component: ivc / ivcore_s_pthread
HPDCO0452E Could not cancel thread (%d).
Explanation: An internal system resource failed.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_failed_pthread_cancel
Number: 0x1354a1c4 (324313540)
Severity: Error
Component: ivc / ivcore_s_pthread
HPDCO0453E Could not join thread (%d).
Explanation: An internal system resource failed.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_failed_pthread_join
Number: 0x1354a1c5 (324313541)
Severity: Error
Component: ivc / ivcore_s_pthread
HPDCO0454E Could not create mutex (%d).
Explanation: An internal system resource failed.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_failed_mutex_create
Number: 0x1354a1c6 (324313542)
Severity: Error
HPDCO0456E Could not lock mutex (%d).
Explanation: An internal system resource failed.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_failed_mutex_lock
Number: 0x1354a1c8 (324313544)
Severity: Error
Component: ivc / ivcore_s_pthread
HPDCO0457E Could not unlock mutex (%d).
Explanation: An internal system resource failed.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_failed_mutex_unlock
Number: 0x1354a1c9 (324313545)
Severity: Error
Component: ivc / ivcore_s_pthread
HPDCO0458E Could not create condition variable
(%d).
Explanation: An internal system resource failed.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_failed_condvar_create
Number: 0x1354a1ca (324313546)
Severity: Error
Component: ivc / ivcore_s_pthread
Component: ivc / ivcore_s_pthread
HPDCO0455E Could not destroy mutex (%d).
HPDCO0459E Could not destroy condition variable
(%d).
Explanation: An internal system resource failed.
Explanation: An internal system resource failed.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_failed_mutex_destroy
Name: iv_s_failed_condvar_destroy
Number: 0x1354a1c7 (324313543)
Number: 0x1354a1cb (324313547)
Severity: Error
Severity: Error
Component: ivc / ivcore_s_pthread
Component: ivc / ivcore_s_pthread
Chapter 1. Tivoli Access Manager Base Messages
127
HPDCO0460E Could not wait on condition variable
(%d).
Explanation: An internal system resource failed.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_failed_condvar_wait
Number: 0x1354a1cc (324313548)
Severity: Error
Component: ivc / ivcore_s_pthread
HPDCO0750E Could not unlink file (%s, %d).
Explanation: The policy database file might be
incomplete or invalid and an attempt to remove the file
failed, or the file might be a temporary file used during
database replication.
Action: Manually remove the file and retry the
operation.
Name: iv_s_unlink_file
Number: 0x1354a2ee (324313838)
Severity: Error
Component: ivc / ivcore_s_file
HPDCO0461E Could not broadcast on condition
variable (%d).
Explanation: An internal system resource failed.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
HPDCO0751E Could not link file (%s, %s, %d).
Explanation: The local mode application could not
rename the database replica file. The database file or
directory might have insufficient permissions.
Number: 0x1354a1cd (324313549)
Action: Remove any temporary database files. For
example, files ending in .tmp. Verify that file and
directory permissions are valid, ensure that sufficient
disk space is available, and retry the operation.
Severity: Error
Name: iv_s_link_file
Component: ivc / ivcore_s_pthread
Number: 0x1354a2ef (324313839)
Name: iv_s_failed_condvar_broadcast
Severity: Error
HPDCO0462E Could not signal on condition variable
(%d).
Explanation: An internal system resource failed.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_failed_condvar_signal
Number: 0x1354a1ce (324313550)
Severity: Error
Component: ivc / ivcore_s_pthread
HPDCO0463E Could not set thread cancelability
(%d).
Explanation: An internal system resource failed.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_failed_setcancel
Number: 0x1354a1cf (324313551)
Severity: Error
Component: ivc / ivcore_s_pthread
Component: ivc / ivcore_s_file
HPDCO0752E Could not open file (%s, %d).
Explanation: An internal system resource failed.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_open_file
Number: 0x1354a2f0 (324313840)
Severity: Error
Component: ivc / ivcore_s_file
HPDCO0753E Error resetting file pointer (%d).
Explanation: An internal system resource failed.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_reset_file_pointer
Number: 0x1354a2f1 (324313841)
Severity: Error
Component: ivc / ivcore_s_file
128
Error Message Reference
HPDCO0754E Could not close file (%d).
HPDCO0764E Could not rename file (%s, %s, %d)
Explanation: An internal system resource failed.
Explanation: Unable to rename/move the file to the
destination.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Action: Check that there is sufficient file and directory
permissions.
Name: iv_s_close_file
Name: iv_s_rename_file
Number: 0x1354a2f2 (324313842)
Number: 0x1354a2fc (324313852)
Severity: Error
Severity: Error
Component: ivc / ivcore_s_file
Component: ivc / ivcore_s_file
HPDCO0755E Could not truncate file (%d).
HPDCO0765E Could not flush file (%s, %d)
Explanation: An internal system resource failed.
Explanation: Flush failed.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Action: Check that the file is not in use and retry the
operation.
Name: iv_s_truncate_file
Number: 0x1354a2f3 (324313843)
Severity: Error
Name: iv_s_flush_file
Number: 0x1354a2fd (324313853)
Severity: Error
Component: ivc / ivcore_s_file
Component: ivc / ivcore_s_file
HPDCO0766E Write to file (%s) failed. (Errno = %d)
HPDCO0757E Could not change file permissions
(%s, %d).
Explanation: The local mode application could not set
permissions on the database replica file. The database
file or directory might have insufficient permissions.
Action: Verify that file and directory permissions are
valid, remove any existing database replicas, and retry
the operation.
Name: iv_s_chmod_file
Explanation: An error occurred writing to the log file
that looks like a file system error.
Action: Check that the file is not in use. You might
obtain more information from the error number.
Name: iv_s_file_write_failed
Number: 0x1354a2fe (324313854)
Severity: Error
Component: ivc / ivcore_s_file
Number: 0x1354a2f5 (324313845)
Severity: Error
HPDCO0767E Could not read file offset(%s, %d).
Component: ivc / ivcore_s_file
Explanation: Read position failed.
HPDCO0758E File does not exist (%s).
Action: Check that the file exists. You might obtain
more information from the error number.
Explanation: See message.
Name: iv_s_tell_file
Action: Check that the specified file exists.
Number: 0x1354a2ff (324313855)
Name: iv_s_file_not_found
Severity: Error
Number: 0x1354a2f6 (324313846)
Component: ivc / ivcore_s_file
Severity: Error
Component: ivc / ivcore_s_file
HPDCO0768E A file descriptor for file %s could not
be opened. (Error number = %d)
Explanation: This failure may be due to insufficient
memory or insufficient handles allocated to the process.
Action: Evaluate The error number to identify the
resource that should be increased.
Chapter 1. Tivoli Access Manager Base Messages
129
Name: iv_s_fdopen_file
Component: ivc / ivcore_s_sock
Number: 0x1354a300 (324313856)
Severity: Error
Component: ivc / ivcore_s_file
HPDCO0769E Could not open file.
Explanation: An internal system resource failed.
HPDCO1053E Could not bind socket to port (%d,
%d).
Explanation: An internal error has occurred.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Action: Refer to the server log file for file name and
error number. Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_socket_bind
Name: iv_s_open_file_error
Component: ivc / ivcore_s_sock
Number: 0x1354a41d (324314141)
Severity: Error
Number: 0x1354a301 (324313857)
Severity: Error
Component: ivc / ivcore_s_file
HPDCO1050E Socket could not be created (%d).
Explanation: An internal error has occurred.
Action: Reallocate system resources and try the
operation again. If the problem persists, contact your
IBM service representative.
Name: iv_s_socket_create
Number: 0x1354a41a (324314138)
Severity: Error
Component: ivc / ivcore_s_sock
HPDCO1055E Cannot understand requested network
interface %s.
Explanation: An internal error has occurred.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_socket_bind_bad_interface
Number: 0x1354a41f (324314143)
Severity: Error
Component: ivc / ivcore_s_sock
HPDCO1056E Could not connect to the server %s, on
port %d.
Explanation: See message.
HPDCO1051E IPV4 socket could not be created (%d).
Explanation: An internal error has occurred.
Action: Reallocate system resources and try the
operation again. If the problem persists, contact your
IBM service representative.
Name: iv_s_socket_create4
Number: 0x1354a41b (324314139)
Severity: Error
Component: ivc / ivcore_s_sock
HPDCO1052E IPV6 socket could not be created (%d).
Explanation: An internal error has occurred.
Action: Ensure the server is operational and accepting
connections.
Name: iv_s_socket_connect
Number: 0x1354a420 (324314144)
Severity: Error
Component: ivc / ivcore_s_sock
HPDCO1059E Could not close socket (errno %d).
Explanation: An internal error has occurred.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Action: Ensure that IPV6 is enabled on the operating
system. Reallocate system resources and try the
operation again. If the problem persists, contact your
IBM service representative.
Name: iv_s_socket_close
Name: iv_s_socket_create6
Component: ivc / ivcore_s_sock
Number: 0x1354a41c (324314140)
Severity: Error
130
Error Message Reference
Number: 0x1354a423 (324314147)
Severity: Error
HPDCO1060E Could not call select() on socket.
HPDCO1352W Unsupported log agent type: %s
Explanation: An internal error has occurred.
Explanation: The log agent type parsed from the
configuration is not supported.
Action: Check the following messages for an
explanation of why this error occurred.
Action: Provide a valid log agent type.
Name: iv_s_socket_select
Name: iv_s_log_agent_unknown
Number: 0x1354a424 (324314148)
Number: 0x1354a548 (324314440)
Severity: Error
Severity: Warning
Component: ivc / ivcore_s_sock
Component: ivc / ivcore_s_log
HPDCO1061E Timeout occurred while attempting to
read from socket.
HPDCO1353W Initialization of remote logging client
failed. (Errno = %d)
Explanation: An SSL response was not received from
the partner within the time period specified by
″ssl-io-inactivity-timeout″.
Explanation: An error occured attempting to create a
connection to a remote logging service.
Action: Increase the value for the
″ssl-io-inactivity-timeout″ entry in the ″[ssl]″ stanza of
the active configuration file. If the problem persists,
contact your IBM service representative.
Action: Check that the logging service is configured
and operational.
Name: iv_s_log_remote_agent_failed
Number: 0x1354a549 (324314441)
Name: iv_s_socket_timeout
Severity: Warning
Number: 0x1354a425 (324314149)
Component: ivc / ivcore_s_log
Severity: Error
Component: ivc / ivcore_s_sock
HPDCO1354W Unrecoverable error accessing cache
file (%s). (Errno = %d).
HPDCO1350E Event formatting overran allocated
buffer.
Explanation: The cache file used by a client of a
remote logging service is corrupt. It has been truncated
to zero length. Events might be lost.
Explanation: Construction of a message overran the
memory allocated to it. Unrecoverable memory
corruption occurred.
Action: Contact your IBM service representative.
Name: iv_s_log_buffer_overrun
Number: 0x1354a546 (324314438)
Severity: Error
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_log_remote_client_cache_error
Number: 0x1354a54a (324314442)
Severity: Warning
Component: ivc / ivcore_s_log
Component: ivc / ivcore_s_log
HPDCO1355W Encoding of message failed.
HPDCO1351W Could not enable (%s) event logging.
Explanation: There is a problem with the options
specified in the log agent configuration string
Action: Reconfigure the event logging service.
Name: iv_s_log_agent_configuration
Number: 0x1354a547 (324314439)
Severity: Warning
Component: ivc / ivcore_s_log
Explanation: An error occured while encoding a
message to be sent to a remote logging service.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_log_remote_client_encode
Number: 0x1354a54b (324314443)
Severity: Warning
Component: ivc / ivcore_s_log
Chapter 1. Tivoli Access Manager Base Messages
131
HPDCO1356W Decoding of message failed.
Explanation: An error occured while decoding a
message received from a remote logging client.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_log_remote_client_decode
Number: 0x1354a54c (324314444)
Severity: Warning
Component: ivc / ivcore_s_log
HPDCO1360W Event handling exception raised at
%s:%d.
Explanation: An error occurred while attempting to
log an event. This is a generic catchall for a variety of
buffer overrun conditions and file system errors. Refer
to the indicated source file and line number for
assistance in further problem isolation.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_log_exception
Number: 0x1354a550 (324314448)
HPDCO1357W Cannot execute pipe program (%s).
(Errno = %d).
Explanation: An error occurred while attempting to
open a pipe for writing.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_log_agent_pipe_failed
Number: 0x1354a54d (324314445)
Severity: Warning
Component: ivc / ivcore_s_log
Severity: Warning
Component: ivc / ivcore_s_log
HPDCO1361W Unexpected exception caught. (errno
= %d).
Explanation: An unknown error occurred while
attempting to log an event.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_log_unexpected_exception
Number: 0x1354a551 (324314449)
HPDCO1358W Cannot write to pipe(%s). (Errno =
%d).
Explanation: An error occurred while attempting to
write to a pipe.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: iv_s_log_pipe_write
Number: 0x1354a54e (324314446)
Severity: Warning
Component: ivc / ivcore_s_log
HPDCO1359W Could not close pipe to program %s.
(errno %d).
Explanation: An error occurred while attempting to
close a pipe.
Severity: Warning
Component: ivc / ivcore_s_log
HPDCO1362W Late event queue request ignored.
Explanation: An event was queued for capture after
the logging service commenced shutdown. The event
was ignored.
Action: No action is required.
Name: iv_s_log_shutdown_event
Number: 0x1354a552 (324314450)
Severity: Warning
Component: ivc / ivcore_s_log
HPDCO1363E Unable to retrieve domain manager.
Explanation: An internal system resource failed.
Action: Reallocate system resources and retry the
operation. If the problem persists, contact your IBM
service representative.
Action: Restart the application and retry the operation.
If the problem persists, contact your service
representative.
Name: iv_s_log_pipe_close
Name: iv_s_no_domain_manager
Number: 0x1354a54f (324314447)
Number: 0x1354a553 (324314451)
Severity: Warning
Severity: Fatal
Component: ivc / ivcore_s_log
Component: ivc / ivcore_s_general
132
Error Message Reference
HPDCO1364E The specified domain does not exist.
Explanation: See message.
Action: Create the domain.
Name: iv_s_no_domain
Number: 0x1354a554 (324314452)
Severity: Fatal
Component: ivc / ivcore_s_general
HPDCO1365E The specified domain does not have a
stanza entry in the configuration file.
Explanation: The specified domain does not have a
stanza entry in the configuration file. The domain can
not be configured.
Action: Re-create the domain.
Name: iv_s_no_domain_stanza
Number: 0x1354a555 (324314453)
Severity: Fatal
Component: ivc / ivcore_s_general
Name: iv_s_domain_init_failed
Number: 0x1354a558 (324314456)
Severity: Fatal
Component: ivc / ivcore_s_general
HPDCO1369E The specified domain already exists.
Explanation: The specified domain already exists.
Action: Recreate the domain.
Name: iv_s_domain_already_exists
Number: 0x1354a559 (324314457)
Severity: Fatal
Component: ivc / ivcore_s_general
HPDCO1370E The domain name specified is invalid.
Explanation: The domain name that was specified is
not valid.
Action: Specify a valid domain name. Valid characters
are a-z, A-Z, 0-9, and [email protected]&*
Name: iv_s_domain_name_invalid
HPDCO1366E The specified domain is being
deleted.
Explanation: See message.
Action: Wait for the domain delete to complete before
re-attempting the failing operation.
Name: iv_s_domain_being_deleted
Number: 0x1354a556 (324314454)
Severity: Fatal
Component: ivc / ivcore_s_general
HPDCO1367E An error occurred while trying to
close the domain.
Explanation: An error occurred while trying to close
the domain.
Action: Restart the application.
Number: 0x1354a55a (324314458)
Severity: Fatal
Component: ivc / ivcore_s_general
HPDCO1371E CARS configuration failed. Location:
%s. Qualifier: %s. Exception: %s
Explanation: Common Auditing and Reporting
(CARS) configuration could not be performed. CARS
audit events will not be generated.
Action: Evaluate the logged exception and correct the
amlog.conf file.
Name: iv_s_audit_cars_properties_error
Number: 0x1354a55b (324314459)
Severity: Error
Component: ivc / ivcore_s_general
Name: iv_s_domain_close_failed
Number: 0x1354a557 (324314455)
Severity: Fatal
HPDCO1372E CARS API failed to load. Location:
%s. Qualifier: %s. Exception: %s
Component: ivc / ivcore_s_general
Explanation: Common Auditing and Reporting
(CARS) API failed to load. CARS audit events will not
be generated.
HPDCO1368E An error occurred while trying to
initialize the domain.
Action: Review the CARS error code and message for
more information.
Explanation: An error occurred while trying to
initialize the domain.
Name: iv_s_audit_cars_load_api_error
Action: Restart the application.
Number: 0x1354a55c (324314460)
Severity: Error
Chapter 1. Tivoli Access Manager Base Messages
133
Component: ivc / ivcore_s_general
HPDCO1373E CARS API method failure. Location:
%s. CARS Method: %s. Place: %d of
%d. Code: %d. Message: %s
Explanation: Common Auditing and Reporting
(CARS) API reports a failure. If CARS reports multiple
errors associated with a failure, multiple entries will be
logged by TAMeB. The Place: field in the log entry
describes the placement of the error within a set of
errors that describe the failure. The error from CARS is
described by the Code: and Message: values.
Action: Review the CARS error code and message for
more information.
Name: iv_s_audit_cars_api_error
HPDDB0150E Not implemented
Explanation: This message is obsolete.
Action: No action is required.
Name: ivdmd_s_not_implemented
Number: 0x13279096 (321360022)
Severity: Error
Component: idb / ivdmd_s_general
HPDDB0450W Could not bind to server (%s,
0x%8.8lx).
Explanation: The application is unable to contact the
policy server.
Severity: Error
Action: Verify that the policy server host name and
port number are configured correctly and that the
remote host can be contected directly via the network.
Component: ivc / ivcore_s_general
Name: ivdmd_s_server_binding
Number: 0x1354a55d (324314461)
Number: 0x132791c2 (321360322)
HPDCO1374W Invalid auditevent entry. Location:
%s. Auditevent value: %s.
Severity: Warning
Explanation: The configured amlog.conf auditevent
entry value is invalid. The entry will be ignored.
Component: idb / ivdmd_s_client
Action: Correct the identified auditevent entry value
in the amlog.conf file.
HPDDB0451E CDS entry for database server does
not exist (%s).
Name: iv_s_audit_cars_auditevent_warning
Explanation: Message is obsolete.
Number: 0x1354a55e (324314462)
Action: No action required.
Severity: Warning
Name: ivdmd_s_server_no_exist
Component: ivc / ivcore_s_general
Number: 0x132791c3 (321360323)
Severity: Error
HPDCO1375E CARS configuration failed in during:
%s for Property Name: %s in Stanza: %s
in File: %s Failure Exception: %s
Explanation: Common Auditing and Reporting
(CARS) configuration could not be completed. CARS
audit events will not be generated.
Action: Look in the configuration file specified within
the stanza specified for the property name specified.
Evaluate the value specified for the property name
while considering the exception text specified. Make
corrections to the property value and retry.
Name: iv_s_audit_cars_properties_error2
Number: 0x1354a55f (324314463)
Severity: Error
Component: ivc / ivcore_s_general
Component: idb / ivdmd_s_client
HPDDB0600I Could not open backing database (%s,
0x%8.8lx).
Explanation: A policy database file exists, but it
cannot be opened.
Action: The database file might have incorrect
permissions br truncated or corrupted. Verify that
policy database file permissions are valid. Also, ensure
that sufficient disk space is available in the file system
and restart the application. For local-mode applications,
if the problem persists, recreate the replica by moving
the database to a temporary location and restarting the
application. For the policy server, restore a backup
database or use the pdacld_dump utility to salvage the
existing database.
Name: ivdmd_s_database_open
Number: 0x13279258 (321360472)
Severity: Notice
134
Error Message Reference
Component: idb / ivdmd_s_db
Component: idb / ivdmd_s_db
HPDDB0601E Could not close backing database
(0x%8.8lx).
HPDDB0605E Could not delete object from backing
database (%s, 0x%8.8lx).
Explanation: The policy database could not be closed
during replication or server shutdown.
Explanation: The policy server is unable to update the
policy database.
Action: Restart the application.
Action: Ensure that sufficient disk space is available in
the file system. If a server restart does not resolve the
problem, use the pdacld_dump utility to verify the
policy database and contact your IBM service
representative.
Name: ivdmd_s_database_close
Number: 0x13279259 (321360473)
Severity: Error
Component: idb / ivdmd_s_db
Name: ivdmd_s_object_delete
Number: 0x1327925d (321360477)
HPDDB0602E Could not create backing database
(%s, 0x%8.8lx).
Explanation: The primary policy database could not
be created or initialized.
Action: Verify the policy database pathname
configuration and file permissions. Ensure that sufficent
disk space is available in the file system.
Name: ivdmd_s_database_create
Number: 0x1327925a (321360474)
Severity: Error
Component: idb / ivdmd_s_db
Severity: Error
Component: idb / ivdmd_s_db
HPDDB0606E Could not initialize database iterator
(0x%8.8lx).
Explanation: The policy server is unable to retrieve an
item from the policy database.
Action: Use the pdacld_dump utility to verify that the
policy database can be read. Compare the number of
objects read with the expected number of objects. If
these numbers differ, use the pdacld_dump utility to
rebuild the policy database and contact your IBM
service representative.
HPDDB0603E Could not fetch object from backing
database (%s, 0x%8.8lx).
Name: ivdmd_s_db_iter_start
Explanation: The policy server is unable to retrieve an
item from the policy database.
Severity: Error
Action: No action is required.
Name: ivdmd_s_object_fetch
Number: 0x1327925b (321360475)
Severity: Error
Component: idb / ivdmd_s_db
HPDDB0604E Could not write object to backing
database (%s, 0x%8.8lx).
Explanation: The policy server is unable to update the
policy database.
Action: Ensure that sufficient disk space is available in
the file system. If a server restart does not resolve the
problem, use the pdacld_dump utility to verify the
policy database and contact your IBM service
representative.
Number: 0x1327925e (321360478)
Component: idb / ivdmd_s_db
HPDDB0607E Could not fetch next database element
(0x%8.8lx).
Explanation: The policy server is unable to retrieve an
item from the policy database.
Action: Use the pdacld_dump utility to verify that the
policy database can be read. Compare the number of
objects read with the expected number of objects. If
these numbers differ, use the pdacld_dump utility to
rebuild the policy database and contact your IBM
service representative.
Name: ivdmd_s_db_iter_next
Number: 0x1327925f (321360479)
Severity: Error
Component: idb / ivdmd_s_db
Name: ivdmd_s_object_store
Number: 0x1327925c (321360476)
Severity: Error
Chapter 1. Tivoli Access Manager Base Messages
135
HPDDB0608E Could not build initial database
replica (%s, 0x%8.8lx).
HPDDB0612E Replica database version is
incompatible and will be replaced.
Explanation: A policy database replication operation
has failed and a replica policy database is unavailable.
Explanation: The application has detected an
incompatible version of the policy database. The
database is replaced automatically.
Action: If a policy replica exists, move it to a
temporary location. If an application restart does not
correct the problem, or if the problem persists, contact
your IBM service representative.
Name: ivdmd_s_failed_build_initial_ replica
Number: 0x13279260 (321360480)
Severity: Error
Component: idb / ivdmd_s_db
HPDDB0609E Could not rebuild database replica
(%s, 0x%8.8lx).
Explanation: A policy database replication operation
has failed.
Action: If a policy replica exists, move it to a
temporary location. If an application restart does not
correct the problem, or if the problem persists, contact
your IBM service representative.
Name: ivdmd_s_failed_build_replica
Number: 0x13279261 (321360481)
Severity: Error
Component: idb / ivdmd_s_db
HPDDB0610I Replica is at current level. No update
is needed.
Action: No action is required.
Name: ivdmd_s_db_downlevel
Number: 0x13279264 (321360484)
Severity: Error
Component: idb / ivdmd_s_db
HPDDB0750E Invalid object name (%s).
Explanation: Message is obsolete.
Action: No action is required.
Name: ivdmd_s_invalid_object_name
Number: 0x132792ee (321360622)
Severity: Error
Component: idb / ivdmd_s_objs
HPDDB0751E Could not decode object (%ld,
0x%8.8x).
Explanation: An error occurred interpreting an item
from the policy database.
Action: Run the pdacld_dump utility to verify the
database integrity and if necessary, rebuild the policy
database.
Name: ivdmd_s_object_decode
Explanation: A policy replication operation has
determined that the local policy database is current.
Number: 0x132792ef (321360623)
Action: No action is required.
Severity: Error
Name: ivdmd_s_replica_already_current
Component: idb / ivdmd_s_objs
Number: 0x13279262 (321360482)
Severity: Notice
HPDDB0752E Could not encode object (%ld,
0x%8.8x).
Component: idb / ivdmd_s_db
Explanation: An error occurred while storing an item
to the policy database.
HPDDB0611E Invalid database specified for
replication.
Action: Restart the policy server and run the
pdacld_dump utility to verify the database integrity.
Explanation: The policy server is unable to provide
replication services.
Name: ivdmd_s_object_encode
Action: Restart the policy server. If this problem
persists, contact your IBM service representative.
Severity: Error
Name: ivdmd_s_invalid_db_handle
Component: idb / ivdmd_s_objs
Number: 0x13279263 (321360483)
Severity: Error
Component: idb / ivdmd_s_db
136
Error Message Reference
Number: 0x132792f0 (321360624)
HPDDB0753E Could not find object (%s).
Explanation: The policy server is unable to retrieve an
item from the policy database.
Number: 0x13279384 (321360772)
Severity: Notice
Component: idb / ivdmd_s_notifier
Action: No action is required.
Name: ivdmd_s_object_not_found
Number: 0x132792f1 (321360625)
Severity: Error
HPDDB0901E Could not bind to client for
notification (%s, 0x%8.8lx).
Explanation: The policy server was unable to contact
the client for a policy database update notification.
Component: idb / ivdmd_s_objs
Action: Ensure that the application is available to
receive notifications.
HPDDB0754E Object type is unknown.
Name: ivdmd_s_failed_bind_client
Explanation: Message is obsolete.
Number: 0x13279385 (321360773)
Action: No action is required.
Severity: Error
Name: ivdmd_s_no_factory
Component: idb / ivdmd_s_notifier
Number: 0x132792f2 (321360626)
Severity: Error
Component: idb / ivdmd_s_objs
HPDDB0755E Unexpected object type.
Explanation: Message is obsolete.
Action: No action is required.
Name: ivdmd_s_unexpected_object_type
Number: 0x132792f3 (321360627)
HPDDB0902I Sending update notification to client
(%s).
Explanation: The policy server is sending a policy
database update notification to the indicated client.
Action: No action is required.
Name: ivdmd_s_notifying_client
Number: 0x13279386 (321360774)
Severity: Notice
Component: idb / ivdmd_s_notifier
Severity: Error
Component: idb / ivdmd_s_objs
HPDDB0756E The policy database is not ready for
use.
Explanation: An internal error has occurred which
prevents the application from retrieving records from
security policy database.
Action: If a server restart does not resolve the
problem, contact your IBM service representative.
HPDDB0903I Notified client (%s).
Explanation: A client has received and processed a
policy database update notification.
Action: No action is required.
Name: ivdmd_s_notified_client
Number: 0x13279387 (321360775)
Severity: Notice
Component: idb / ivdmd_s_notifier
Name: ivdmd_s_invalid_cache_state
Number: 0x132792f4 (321360628)
Severity: Error
Component: idb / ivdmd_s_objs
HPDDB0900I Could not send client notification (%s,
0x%8.8lx).
Explanation: The policy server was unable to notify
the application that a policy database update is
available.
Action: No action is required.
HPDDB0904I Have stopped trying to send events to
client (%s).
Explanation: Several policy database update
notifications have failed. The policy server no longer
makes attempts to contact this client.
Action: No action is required.
Name: ivdmd_s_ignoring_client
Number: 0x13279388 (321360776)
Severity: Notice
Component: idb / ivdmd_s_notifier
Name: ivdmd_s_failed_notify_client
Chapter 1. Tivoli Access Manager Base Messages
137
HPDDB0905I Retrying client notification (%s).
Explanation: A client did not respond to a policy
database update notification. Another attempt at
notification is being made.
Action: No action is required.
Name: ivdmd_s_retrying_client
Number: 0x13279389 (321360777)
Severity: Notice
Number: 0x1327941b (321360923)
Severity: Error
Component: idb / ivdmd_s_download
HPDDB1052E Could not read database header
(0x%8.8lx).
Explanation: The policy database could not be opened
and initialized.
Name: ivdmd_s_client_not_found
Action: The database file might have incorrect
permissions br truncated or corrupted. Verify that
policy database file permissions are valid. Also, ensure
that sufficient disk space is available in the file system
and restart the application. For local-mode applications,
if the problem persists, recreate the replica by moving
the database to a temporary location and restarting the
application. For the policy server, restore a backup
database or use the pdacld_dump utility to salvage the
existing database.
Number: 0x1327938a (321360778)
Name: ivdmd_s_read_db_header
Severity: Error
Number: 0x1327941c (321360924)
Component: idb / ivdmd_s_notifier
Severity: Error
Component: idb / ivdmd_s_notifier
HPDDB0906E Client not found.
Explanation: An attempt was made to retrieve
information about an unknown client.
Action: No action is required.
Component: idb / ivdmd_s_download
HPDDB0907E Client already exists.
Explanation: An attempt was made to add a client
which already exists.
HPDDB1053E Could not write database header
(0x%8.8lx).
Action: No action is required.
Explanation: The primary policy database could not
be created or initialized.
Name: ivdmd_s_client_already_exists
Severity: Error
Action: Verify the policy database pathname
configuration and file permissions. Ensure that sufficent
disk space is available in the file system.
Component: idb / ivdmd_s_notifier
Name: ivdmd_s_write_db_header
Number: 0x1327938b (321360779)
Number: 0x1327941d (321360925)
HPDDB1050E Could not download object (%s,
0x%8.8lx).
Explanation: Message is obsolete.
Action: No action is required.
Name: ivdmd_s_download_failure
Number: 0x1327941a (321360922)
Severity: Error
Severity: Error
Component: idb / ivdmd_s_download
HPDDB1054W Master database server is unavailable
(0x%8.8lx).
Explanation: The application is unable to contact the
policy server.
Component: idb / ivdmd_s_download
Action: Verify that the policy server host name and
port number are configured correctly and that the
remote host can be contected directly via the network.
HPDDB1051E Remote update detected - aborting
download.
Name: ivdmd_s_remote_server_unavailable
Explanation: The application received multiple policy
update notifications. The secondary notifications are
discarded.
Severity: Warning
Action: No action is required.
Name: ivdmd_s_update_detected
138
Error Message Reference
Number: 0x1327941e (321360926)
Component: idb / ivdmd_s_download
HPDDB1055I Checking synchronization with remote
server.
Number: 0x13279423 (321360931)
Severity: Notice
Explanation: The application is performing a policy
database synchronization check.
Component: idb / ivdmd_s_download
Action: No action is required.
HPDDB1060W Could not check synchronization
with master database server - using local
replica instead.
Name: ivdmd_s_checking_sync
Number: 0x1327941f (321360927)
Severity: Notice
Explanation: A new policy database could not be
downloaded. The existing database is used.
Component: idb / ivdmd_s_download
Action: No action is required.
Name: ivdmd_s_cant_check_sync
HPDDB1056I Rebuilding local database replica.
Explanation: The application is rebuilding its local
policy database.
Action: No action is required.
Name: ivdmd_s_downloading_db
Number: 0x13279420 (321360928)
Severity: Notice
Component: idb / ivdmd_s_download
HPDDB1057I Received update notification.
Explanation: The application received a policy update
notification from the policy server.
Action: No action is required.
Name: ivdmd_s_got_notification
Number: 0x13279421 (321360929)
Severity: Notice
Component: idb / ivdmd_s_download
HPDDB1058I Handled update notification.
Explanation: The application processed a policy
update notification from the policy server.
Action: No action is required.
Name: ivdmd_s_notification_done
Number: 0x13279422 (321360930)
Severity: Notice
Component: idb / ivdmd_s_download
Number: 0x13279424 (321360932)
Severity: Warning
Component: idb / ivdmd_s_download
HPDDB1061E Critical failure during DB replication aborting (0x%8.8lx).
Explanation: The application is unable to create a
policy database replica. The application aborts.
Action: If a policy replica exists, move it to a
temporary location. Ensure that the files system has
sufficent disk space and that file and directory
permissions are correct. If an application restart does
not correct this problem, or if the problem persists,
contact your IBM service representative.
Name: ivdmd_s_critical_rep_failure
Number: 0x13279425 (321360933)
Severity: Fatal
Component: idb / ivdmd_s_download
HPDDB1062W Could not rebuild local replica continuing to use existing replica
(0x%8.8lx).
Explanation: The application is not able to update the
existing policy database. The existing database is used.
Action: Ensure that the file system has sufficent disk
space. If this problem persists, restart the policy server.
Name: ivdmd_s_cant_rebuild_db
Number: 0x13279426 (321360934)
Severity: Warning
HPDDB1059I Ignoring update notification.
Component: idb / ivdmd_s_download
Explanation: The application processed a policy
update notification from the policy server and
determined that no replication is necessary.
HPDDL0001E Database not open.
Action: No action is required.
Name: ivdmd_s_notification_ignored
Explanation: The database was not opened before this
database call.
Action: Call pd_db_open before this database
procedure.
Chapter 1. Tivoli Access Manager Base Messages
139
Name: db_s_not_open
Number: 0x14601001 (341839873)
Severity: Error
Component: lib / pd_s_db
Action: Call pd_db_open with the data type that
matches the database data type.
Name: db_s_index_type_mismatch
Number: 0x14601005 (341839877)
Severity: Error
HPDDL0002E Database filename missing.
Component: lib / pd_s_db
Explanation: The database filename was not supplied
when trying to open the database with pd_db_open.
HPDDL0008I Key not found in database.
Action: Call pd_db_open with a valid database
filename.
Explanation: The specified key was not found in the
database.
Name: db_s_no_name_specified
Action: No action is required.
Number: 0x14601002 (341839874)
Name: db_s_key_not_found
Severity: Error
Number: 0x14601008 (341839880)
Component: lib / pd_s_db
Severity: Notice
Component: lib / pd_s_db
HPDDL0003I No more entries to iterate.
Explanation: The pd_db_iter_next function passed the
last entry in the database. There are no more entries in
the iteration.
Action: Call pd_db_iter_done to complete the
iteration.
Name: db_s_no_more
Number: 0x14601003 (341839875)
Severity: Notice
Component: lib / pd_s_db
HPDDL0004E The data type is not known or is
incorrectly specified.
Explanation: An attempt was made to create a
database without specifying an index type or to open
an existing database with an incorrect type.
Action: When creating a new database, the data_type
(pd_db_type_t) parameter must be either
pd_db_type_ivobj or pd_db_type_encoded. When
opening an existing database, the data type must match
the type used when the database was first created.
Name: db_s_bad_index_type
Number: 0x14601004 (341839876)
Severity: Error
Component: lib / pd_s_db
HPDDL0005E The data type (pd_db_type_t) in the
flags parameter does not match the type
in the database.
Explanation: The data type parameter to pd_db_open
did not match the type stored in the database.
140
Error Message Reference
HPDDL0009E Database create failure - data file
already exists.
Explanation: When attempting to open a database
with the PD_DB_CREATE flag the specified database
file was found to already exist.
Action: Do not open an existing database with the
PD_DB_CREATE flag, Or, you can remove the database
file if a new (and empty) database is desired.
Name: db_s_open_already_exists
Number: 0x14601009 (341839881)
Severity: Error
Component: lib / pd_s_db
HPDDL0010I Database open failure - no such file or
directory.
Explanation: The specified database file or part of its
path was not found. The open call returned ENOENT.
Action: Correct the pathname to the file you are
attempting to open.
Name: db_s_open_failed_enoent
Number: 0x1460100a (341839882)
Severity: Notice
Component: lib / pd_s_db
HPDDL0011E Database open failure - permission
denied
Explanation: The server does not have permission to
open the database file. The open call returned EACCES.
Action: Run the process as the operating system user
who has permission to access the database, or change
the permission of the database file itself or the path to
it.
Name: db_s_open_failed_eacces
Number: 0x1460100b (341839883)
Severity: Error
Component: lib / pd_s_db
HPDDL0012E Database open failure.
Explanation: The database-open procedure has failed.
Action: Examine the global variable, errno, for further
information. Database open failures can also occur if
codepage conversion tables are not accessible or could
not be initialized.
Name: db_s_open_failed
HPDDL0017E This database does not contain a valid
header.
Explanation: An attempt to fetch the database header
failed. The database might be truncated or otherwise
corrupted.
Action: Use the pdacld_dump utility to validate and if
necessary, repair the database.
Name: db_s_no_header
Number: 0x14601011 (341839889)
Severity: Fatal
Component: lib / pd_s_db
HPDDL0023E The operation is not allowed while
iterating.
Component: lib / pd_s_db
Explanation: A call to either a function that alters a
backing store (a store or delete operation) or one that
starts another iteration was attempted while iterating.
This is not allowed.
HPDDL0013E Database store failure.
Action: Do not call routines that alter the backing
store or nest iterations while in an iteration loop.
Explanation: The database-store procedure has failed.
Name: db_s_iter_not_allowed
Action: Examine the global variable, errno, for further
information.
Number: 0x14601017 (341839895)
Name: db_s_store_failed
Component: lib / pd_s_db
Number: 0x1460100c (341839884)
Severity: Error
Severity: Error
Number: 0x1460100d (341839885)
Severity: Error
HPDED0100E Invalid argument: Null context.
Component: lib / pd_s_db
Explanation: A nonnull PDContext object is required
to communicate with the Tivoli Access Manager policy
server.
HPDDL0014E Database fetch failure.
Explanation: The database-fetch procedure has failed.
Action: Examine the global variable, errno, for further
information.
Action: Ensure that the context argument is nonnull.
Name: bed_invalid_ctxt
Number: 0x306e3064 (812527716)
Name: db_s_fetch_failed
Severity: Error
Number: 0x1460100e (341839886)
Component: bed / bed_s_general
Severity: Error
Component: lib / pd_s_db
HPDDL0015E Database delete operation failure.
Explanation: The database-delete procedure has failed.
Action: Examine the global variable, errno, for further
information.
Name: db_s_del_failed
Number: 0x1460100f (341839887)
Severity: Error
HPDED0101E Unknown message code: %s.
Explanation: The text for the message code could not
be found in the message catalogs installed on the local
system. This typically means that the policy server is at
a more recent level than the client and has returned a
code undefined in the client runtime. The
documentation associated with the policy server
installation should include the message code.
Action: Consult the Error Message Reference to obtain
the message text, explanation, and suggested actions
for the message code.
Name: bed_unknown_msgcode
Component: lib / pd_s_db
Chapter 1. Tivoli Access Manager Base Messages
141
Number: 0x306e3065 (812527717)
Name: bed_cannot_create_obj
Severity: Error
Number: 0x306e30ca (812527818)
Component: bed / bed_s_general
Severity: Error
Component: bed / bed_s_server
HPDED0102E The specified configuration or
keystore file already exists.
Explanation: The ’create’ configuration action is
designed to check for existing files and fail if they are
found in order not to overwrite them accidentally.
Action: To preserve existing files, specify new
configuration and keystore file names. To overwrite
existing files, specify the ’replace’ configuration action.
Name: bed_appsvrcfg_file_exists
Number: 0x306e3066 (812527718)
Severity: Error
Component: bed / bed_s_general
HPDED0200E Invalid argument: Null context.
Explanation: A nonnull PDContext object is required
to communicate with the Tivoli Access Manager policy
server.
Action: Ensure that the context argument is nonnull.
Name: bed_invalid_ctxt2
Number: 0x306e30c8 (812527816)
Severity: Error
Component: bed / bed_s_server
HPDED0201E The AmIdentity does not contain a
valid name.
Explanation: The AmIdentity does not contain a valid
name.
Action: Refer to the Tivoli Access Manager error log
for more information. If the problem persists, contact
your IBM service representative to report the condition.
Name: bed_no_name_in_id
Number: 0x306e30c9 (812527817)
Severity: Error
Component: bed / bed_s_server
HPDED0202E The AmObject cannot be created from
the encoded object.
Explanation: The AmObject cannot be created from
the encoded object.
Action: Refer to the Tivoli Access Manager error log
for more information. If the problem persists, contact
your IBM service representative to report the condition.
142
Error Message Reference
HPDED0203E The object type requested is
unexpected.
Explanation: The object type requested is unexpected.
The object cannot be decoded.
Action: Refer to the Tivoli Access Manager error log
for more information. If the problem persists, contact
your IBM service representative to report the condition.
Name: bed_unexpected_object_type
Number: 0x306e30cb (812527819)
Severity: Error
Component: bed / bed_s_server
HPDED0204E The configuration information cannot
be stored to file.
Explanation: The configuration information cannot be
stored to file.
Action: Ensure that the configuration file is writable.
Name: bed_cannot_store_to_config_file
Number: 0x306e30cc (812527820)
Severity: Error
Component: bed / bed_s_server
HPDED0205E The temporary database file %s cannot
be written.
Explanation: The temporary database file cannot be
written.
Action: Refer to the Tivoli Access Manager error log
for more information. If the problem persists, contact
your IBM service representative to report the condition.
Name: bed_cannot_write_file
Number: 0x306e30cd (812527821)
Severity: Error
Component: bed / bed_s_server
HPDED0206E Could not get socket input stream.
Explanation: Could not get socket input stream.
Action: Refer to the Tivoli Access Manager error log
for more information. If the problem persists, contact
your IBM service representative to report the condition.
Name: bed_sock_get_input_stream
Number: 0x306e30ce (812527822)
Severity: Error
Component: bed / bed_s_server
HPDED0207E Could not read data from data input
stream or socket.
permissions to read/write database sequence property
file in the <AM_INSTALL_DIR>/PolicyDirector /db
directory.
Name: bed_cannot_load_database_sequence_ file
Number: 0x306e30d2 (812527826)
Severity: Error
Explanation: Could not read data from data input
stream or socket.
Component: bed / bed_s_server
Action: Refer to the Tivoli Access Manager error log
for more information. If the problem persists, contact
your IBM service representative to report the condition.
HPDED0211E The database sequence information
cannot be stored to file.
Name: bed_data_input_stream
Number: 0x306e30cf (812527823)
Severity: Error
Component: bed / bed_s_server
Explanation: The database sequence information
cannot be stored to file.
Action: Ensure that the user has the necessary
permissions to read/write database sequence property
file in the <AM_INSTALL_DIR>/PolicyDirector /db
directory.
Name: bed_cannot_store_to_db_sequence_ file
HPDED0208E Could not write data to data output
stream or socket.
Explanation: Could not write data to data output
stream or socket.
Action: Refer to the Tivoli Access Manager error log
for more information. If the problem persists, contact
your IBM service representative to report the condition.
Name: bed_data_output_stream
Number: 0x306e30d0 (812527824)
Severity: Error
Component: bed / bed_s_server
Number: 0x306e30d3 (812527827)
Severity: Error
Component: bed / bed_s_server
HPDED0300E Invalid argument: Null context.
Explanation: A nonnull PDContext object is required
to communicate with the Tivoli Access Manager policy
server.
Action: Ensure that the context argument is nonnull.
Name: bed_invalid_ctxt3
Number: 0x306e312c (812527916)
HPDED0209E An error occurred while creating
database sequence property file.
Explanation: Unable to create database sequence
property file in PolicyDirector/db directory of the
AM_INSTALL_DIR.
Action: Ensure that the user has the necessary
permissions to create file in the <AM_INSTALL_DIR>/
PolicyDirector/db directory.
Name: bed_cannot_create_database_ sequence_file
Number: 0x306e30d1 (812527825)
Severity: Error
Component: bed / bed_s_server
Severity: Error
Component: bed / bed_s_localdb
HPDED0400E Invalid argument: Too many
properties.
Explanation: The database filename configured for the
application is not specified correctly in the
configuration file.
Action: Ensure that the keyword/value for
’filename=<db pathname>’ is correctly specified in the
configuration file.
Name: bed_hfdb_2manyprops
Number: 0x306e3190 (812528016)
HPDED0210E An error occurred while loading
database sequence property file.
Severity: Error
Component: bed / bed_s_db44
Explanation: Unable to load database sequence
property file in PolicyDirector/db directory of the
AM_INSTALL_DIR.
Action: Ensure that the user has the necessary
Chapter 1. Tivoli Access Manager Base Messages
143
HPDED0401E Invalid argument: Filename property
not found.
Explanation: The database filename configured for the
application is not specified correctly in the
configuration file.
Action: Ensure that the keyword/value for
’filename=<db pathname>’ is correctly specified in the
configuration file.
Name: bed_hfdb_needfilename
Number: 0x306e3191 (812528017)
Severity: Error
Component: bed / bed_s_db44
HPDED0402E Invalid argument: Filename not
supplied.
Explanation: The database filename configured for the
application is not specified correctly in the
configuration file.
Action: Ensure that the keyword/value for
’filename=<db pathname>’ is correctly specified in the
configuration file.
Name: bed_hfdb_file
Number: 0x306e3192 (812528018)
Severity: Error
Component: bed / bed_s_db44
Severity: Error
Component: bed / bed_s_db44
HPDED0405E The version of the local replicated
database is downlevel and not
supported.
Explanation: See text.
Action: Ensure the versions of the local Tivoli Access
Manager runtime environment and policy server are
supported. If the problem persists, contact your IBM
service representative to report the condition.
Name: bed_db_downlevel
Number: 0x306e3195 (812528021)
Severity: Error
Component: bed / bed_s_db44
HPDED0406E A database object cache store
operation failed.
Explanation: An error occurred while attempting to
retrieve an entry from the database object cache.
Action: Refer to the Tivoli Access Manager error log
for more information. If the problem persists, contact
your IBM service representative to report the condition.
Name: bed_store_to_cache_failed
Number: 0x306e3196 (812528022)
Severity: Error
HPDED0403E Invalid state: Could not open
database.
Component: bed / bed_s_db44
Explanation: The database file specified in the
configuration file could not be opened.
HPDED0407E A database object cache retrieve
operation failed.
Action: Ensure that the keyword/value for
’filename=<db pathname>’ is correctly specified in the
configuration file.
Explanation: An error occurred while attempting to
write an entry to the database object cache.
Name: bed_hfdb_ioerr
Number: 0x306e3193 (812528019)
Severity: Error
Component: bed / bed_s_db44
Action: Refer to the Tivoli Access Manager error log
for more information. If the problem persists, contact
your IBM service representative to report the condition.
Name: bed_get_from_cache_failed
Number: 0x306e3197 (812528023)
Severity: Error
HPDED0404E Invalid state: Expected %d, but got %d
from database.
Component: bed / bed_s_db44
Explanation: An internal error occurred. The database
may have been corrupted.
HPDED0408E A database file read operation failed.
Action: Refer to the Tivoli Access Manager error log
for more information. If the problem persists, contact
your IBM service representative to report the condition.
Name: bed_hfdb_datatype
Number: 0x306e3194 (812528020)
144
Error Message Reference
Explanation: An error occurred while attempting to
read the database file. The database could be corrupted.
Action: Refer to the Tivoli Access Manager error log
for more information. Ensure the Tivoli Access Manager
is up and running and the application is properly
configured. If the problem persists, contact your IBM
service representative to report the condition.
Name: bed_read_failed
Number: 0x306e3198 (812528024)
Severity: Error
Component: bed / bed_s_db44
HPDED0409E The database file was not found.
Explanation: The database file was not found in the
location specified by the configuration file.
Action: Ensure the Tivoli Access Manager is up and
running and the application is properly configured.
HPDED0412E Startup failure: Local policy database
unavailable.
Explanation: An error occurred while attempting to
retrieve the policy database from the Tivoli Access
Manager policy server at application statup. A
subsequent attempt to start the application with a valid
local copy of the database also failed.
Action: Ensure both the Tivoli Access Manager and
the user registry server are up and running, and the
application is properly configured.
Name: bed_policy_database_unavailable
Number: 0x306e319c (812528028)
Name: bed_file_not_found
Severity: Error
Number: 0x306e3199 (812528025)
Component: bed / bed_s_db44
Severity: Error
Component: bed / bed_s_db44
HPDED0410E Could not read policy database header.
Explanation: The policy database header information
could not be read. The database could be corrupted or
have incorrect permissions.
Action: Verify that the policy database file permissions
are valid. Also, ensure that sufficient disk space is
available in the file system and restart the application.
For local-mode applications, if the problem persists,
recreate the replica by moving the database to a
temporary location and restarting the application.
Name: bed_read_db_header
Number: 0x306e319a (812528026)
Severity: Error
Component: bed / bed_s_db44
HPDED0411E Invalid state: Policy retrieval error.
Explanation: An unexpected error occurred while
retrieving policy data from the database. The database
could be currupted.
Action: Ensure the Tivoli Access Manager is up and
running and the application is properly configured. If
the problem persists, contact your IBM service
representative to report the condition.
Name: bed_policy_name_error
Number: 0x306e319b (812528027)
Severity: Error
Component: bed / bed_s_db44
HPDHP0117E The response file could not be read.
Explanation: A response file was indicated, but could
not be found or read.
Action: Retry the install with a valid response file.
Name: CANTREADRESPONSEFILE
Number: 0x306e1075 (812519541)
Severity: Error
Component: beb / pdinst_s_pdinst_util
HPDHP0119W A required value is missing:
Explanation: The indicated field is empty and requires
a value.
Action: Enter a valid value in the indicated field.
Name: MISSING_REQUIRED_VALUE
Number: 0x306e1077 (812519543)
Severity: Warning
Component: beb / pdinst_s_pdinst_util
HPDHP0120W This directory is not valid:
Explanation: The indicated directory is not a valid
directory.
Action: Enter a valid directory name.
Name: INVALID_DIRECTORY
Number: 0x306e1078 (812519544)
Severity: Warning
Component: beb / pdinst_s_pdinst_util
Chapter 1. Tivoli Access Manager Base Messages
145
HPDHP0121E This file could not be read:
Explanation: A file is missing or could not be read.
Action: Verify that the file is present and is readable.
Contact your IBM service representative if the media is
damaged or invalid.
Name: FILE_NOT_READ
Number: 0x306e1079 (812519545)
Severity: Error
Component: beb / pdinst_s_pdinst_util
HPDHP0122W An integer is required:
Explanation: An integer only field contains something
other than an integer.
Action: Enter an integer in the indicated field.
Name: INTEGER_REQUIRED
Number: 0x306e107a (812519546)
Severity: Warning
Name: NO_HELP_AVAILABLE
Number: 0x306e107d (812519549)
Severity: Warning
Component: beb / pdinst_s_pdinst_util
HPDHP0126E Silent mode requires a valid response
file.
Explanation: An attempt was made to start a silent
install without using the required response file.
Action: Retry the install using a response file. Refer to
the install documentation for assistance.
Name: SILENT_NO_RESPONSE_FILE
Number: 0x306e107e (812519550)
Severity: Error
Component: beb / pdinst_s_pdinst_util
HPDHP0127E An error occurred creating silent
install iss file.
Component: beb / pdinst_s_pdinst_util
Explanation: The install was unable to create a
temporary file.
HPDHP0123E Unable to create the response file.
Action: Insure that the disk or temporary file is not
full. Insure that a file can be written to the temporary
file area. Re-attempt the install. Contact your IBM
service representative if the error reoccurs.
Explanation: The installation was unable to create a
response file.
Action: Insure that the disk is not full and that a file
can be written to the disk. Manually restart the system
and restart the installation.
Name: CANNOT_CREATE_ISS
Number: 0x306e107f (812519551)
Name: CANT_WRITE_RESPONSES
Severity: Error
Number: 0x306e107b (812519547)
Component: beb / pdinst_s_pdinst_util
Severity: Error
HPDHP0124W Unable to create the help URL file:
HPDHP0128E Check the status of the server, the host
name and the port number. The server
could not be reached with the specified
port:
Explanation: A help URL was unavailable or invalid.
Explanation: Communication with the host failed.
Action: Continue the installation. Refer to the install
documentation for assistance.
Action: Insure that host name is correct, the host is
active and network connections are valid. Be sure the
server is running.
Component: beb / pdinst_s_pdinst_util
Name: CANT_CREATE_HELP_URL
Number: 0x306e107c (812519548)
Severity: Warning
Component: beb / pdinst_s_pdinst_util
Name: HOST_NOT_REACHABLE
Number: 0x306e1080 (812519552)
Severity: Error
Component: beb / pdinst_s_pdinst_util
HPDHP0125W No help is available.
Explanation: Help is not available for the selected
item.
HPDHP0167W The JRE path is invalid. Could not
locate bin/java[.exe] in the specified
directory.
Action: Continue the installation. Refer to the install
documentation for assistance.
Explanation: The process will look in the specified
directory for bin/java or bin/java.exe.
146
Error Message Reference
Action: Enter a valid directory name where bin/java
resides.
Name: JRE_PATH_INVALID
Number: 0x306e10ff (812519679)
Severity: Error
Component: beb / pdinst_s_pdinst_util
Number: 0x306e10a7 (812519591)
Severity: Warning
HPDHP0259E Failed to start LDAP Server
Component: beb / pdinst_s_pdinst_util
Explanation: Displayed when LDAP Server fails to
start.
HPDHP0208E Specify a JRE path that does not
contain lib/ext/ibmjcaprovider.jar or stop
this process and then remove the file:
Action: The user must start the LDAP Server
manually.
Explanation: lib/ext/ibmjcaprovider.jar cannot exist in
the path of the JRE specified. If it does, configuration
will not be successful.
Name: FAILED_START_LDAP_SERVER
Number: 0x306e1103 (812519683)
Severity: Error
Action: Enter a different JRE path or stop this process,
remove the file, then retry the command.
Component: beb / pdinst_s_pdinst_util
Name: REMOVE_JCA_JAR
HPDHP0283E The specified administrator must be a
member of the idsldap group.
Number: 0x306e10d0 (812519632)
Severity: Error
Component: beb / pdinst_s_pdinst_util
HPDHP0214E This process requires a 64 bit kernel
for AIX.
Explanation: This will end the process if the kernel is
not 64 bit.
Action: Retry the command on a 64 bit machine.
Name: AIX64_REQUIRED
Number: 0x306e10d6 (812519638)
Severity: Error
Component: beb / pdinst_s_pdinst_util
HPDHP0254E The port number is already in use:
Explanation: An unused port number must be
selected and this port is already in use.
Action: Either stop the process using this port or
select a different port number.
Name: PORT_IS_ACTIVE
Explanation: The idsldap group must exist and this
administrator id must be a member of it.
Action: Correct the problem or specify a user id that
is set up properly, or allow the process to create the id
for you.
Name: idsldap.group.required
Number: 0x306e111b (812519707)
Severity: Error
Component: beb / pdinst_s_pdinst_util
HPDHP0331E SSL is not a valid option for the
Access Manager runtime on UNIX.
Remove
AMRTE_EnableSSLUIPanel.enableSSL
from the response file and attempt the
install again.
Explanation: The user has specified to enable SSL for
AMRTE via the response file. SSL is only available for
the other products like AMACLD, AMMGR, etc.
Action: Remove the -W
AMRTE_EnableSSLUIPanel.enableSSL=″yes″ option
from the response file or set it to ″no″.
Number: 0x306e10fe (812519678)
Name: SSL_NOT_OK_AMRTE
Severity: Error
Number: 0x306e114b (812519755)
Component: beb / pdinst_s_pdinst_util
Severity: Error
HPDHP0255E The ports entered cannot be the same:
Explanation: The panel contains two port entries and
the user entered the same values for both.
Action: Enter a different value for each port numbers.
Name: PORTS_MUST_DIFFER
Component: beb / pdinst_s_pdinst_util
HPDHP0345E IBM Tivoli Directory Server appears to
be installed on this system and at a
lower fix level than what is supported.
Upgrade the server first, then retry this
process.
Chapter 1. Tivoli Access Manager Base Messages
147
Explanation: An attempt was made to install the
LDAP client while a lower fix level is currently
installed. This action is not supported.
Action: Upgrade the LDAP server to the same or
newer level as the intended LDAP client, then retry this
command.
Name: LDAPS_UPGRADE_INVALID
Number: 0x306e1159 (812519769)
Severity: Error
Component: beb / pdinst_s_pdinst_util
Severity: Warning
Component: bez / pdinst_s_pdinst_util
HPDHZ0019W This directory is not valid:
Explanation: The indicated directory is not a valid
directory.
Action: Enter a valid directory name.
Name: INVALID_DIRECTORY
Number: 0x306f9013 (812617747)
Severity: Warning
HPDHZ0001E Unable to parse the file:
Component: bez / pdinst_s_pdinst_util
Explanation: The file is either invalid or cannot be
read.
HPDHZ0020E This file could not be read:
Action: Ensure the file is valid and can be read.
Explanation: A file is missing or could not be read.
Name: pdbcp_cannot_parse
Action: Verify that the file is present and is readable.
Contact your IBM service representative if the media is
damaged or invalid.
Number: 0x3069f001 (812249089)
Severity: Error
Component: bcp / pdinst_s_pdinst_util
HPDHZ0002E Unable to read the file:
Explanation: The file is either invalid or cannot be
read.
Action: Ensure the file is valid and can be read.
Name: pdbcp_cannot_read
Name: FILE_NOT_READ
Number: 0x306f9014 (812617748)
Severity: Error
Component: bez / pdinst_s_pdinst_util
HPDHZ0021E This file could not be found:
Explanation: A file is missing.
Severity: Error
Action: Verify that the file is present. Contact your
IBM service representative if the media is damaged or
invalid.
Component: bcp / pdinst_s_pdinst_util
Name: FILE_NOT_FOUND
Number: 0x3069f002 (812249090)
Number: 0x306f9015 (812617749)
HPDHZ0017E The response file could not be read.
Explanation: A response file was indicated, but could
not be found or read.
Action: Retry the install with a valid response file.
Name: CANTREADRESPONSEFILE
Number: 0x306f9011 (812617745)
Severity: Error
Component: bez / pdinst_s_pdinst_util
HPDHZ0018W A required value is missing:
Explanation: The indicated field is empty and requires
a value.
Action: Enter a valid value in the indicated field.
Name: MISSING_REQUIRED_VALUE
Number: 0x306f9012 (812617746)
148
Error Message Reference
Severity: Error
Component: bez / pdinst_s_pdinst_util
HPDHZ0024E Restart is only supported through the
use of the native launcher.
Explanation: The installation was started directly from
Java and did not use the native binary launcher.
Action: Restart the installation using the native
launcher. Refer to the installation documentation for
specific instructions for using the native launcher.
Name: RESTART_NOT_SUPPORTED
Number: 0x306f9018 (812617752)
Severity: Error
Component: bez / pdinst_s_pdinst_util
HPDHZ0025W An integer is required:
Explanation: An integer only field contains something
other than an integer.
the install documentation for assistance.
Name: SILENT_NO_RESPONSE_FILE
Number: 0x306f901f (812617759)
Action: Enter an integer in the indicated field.
Severity: Error
Name: INTEGER_REQUIRED
Component: bez / pdinst_s_pdinst_util
Number: 0x306f9019 (812617753)
Severity: Warning
Component: bez / pdinst_s_pdinst_util
HPDHZ0026E Unable to create the response file.
Explanation: The installation was unable to create a
response file.
Action: Insure that the disk is not full and that a file
can be written to the disk. Manually restart the system
and restart the installation.
HPDHZ0033I All of the products have already been
installed and configured.
Explanation: All products are installed and
configured.
Action: No action required.
Name: ALL_CONFIGURED
Number: 0x306f9021 (812617761)
Severity: Notice
Component: bez / pdinst_s_pdinst_util
Name: CANT_WRITE_RESPONSES
Number: 0x306f901a (812617754)
Severity: Error
Component: bez / pdinst_s_pdinst_util
HPDHZ0027W Unable to create the help URL file:
Explanation: A help URL was unavailable or invalid.
Action: Continue the installation. Refer to the install
documentation for assistance.
HPDHZ0035E An error occurred creating silent
install iss file.
Explanation: The install was unable to create a
temporary file.
Action: Insure that the disk or temporary file is not
full. Insure that a file can be written to the temporary
file area. Re-attempt the install. Contact your IBM
service representative if the error reoccurs.
Name: CANNOT_CREATE_ISS
Name: CANT_CREATE_HELP_URL
Number: 0x306f9023 (812617763)
Number: 0x306f901b (812617755)
Severity: Error
Severity: Warning
Component: bez / pdinst_s_pdinst_util
Component: bez / pdinst_s_pdinst_util
HPDHZ0029W No help is available:
Explanation: Help is not available for the selected
item.
Action: Continue the installation. Refer to the install
documentation for assistance.
Name: NO_HELP_AVAILABLE
Number: 0x306f901d (812617757)
Severity: Warning
Component: bez / pdinst_s_pdinst_util
HPDHZ0031E Silent mode requires a valid response
file.
HPDHZ0051E Update is not supported for the
installed version of the product:
Explanation: The installed version of a product cannot
be updated.
Action: Manually remove the product and retry the
installation. Refer to the installation documentation for
more information.
Name: UPDATE_ERROR
Number: 0x306f9033 (812617779)
Severity: Error
Component: bez / pdinst_s_pdinst_util
HPDHZ0052E Update is not supported for the
product:
Explanation: An attempt was made to start a silent
install without using the required response file.
Explanation: The product cannot be updated.
Action: Retry the install using a response file. Refer to
Action: Manually remove the product and retry the
installation.
Chapter 1. Tivoli Access Manager Base Messages
149
Name: UPDATE_UNSUPPORTED
Severity: Error
Number: 0x306f9034 (812617780)
Component: ias / ivauthn_s_general
Severity: Error
Component: bez / pdinst_s_pdinst_util
HPDIA0103E Unable to locate symbol in shared
library.
HPDHZ0054E The password and password
confirmation fields do not match.
Explanation: An attempt to retrieve a symbol from a
shared library failed. The most probable reason for the
error is that the library was built incorrectly.
Explanation: The password and the password
confirmation fields must contain the same string.
Action: Enter the correct password in both fields.
Name: ERROR_CONFIRM_PASSWORD
Number: 0x306f9036 (812617782)
Severity: Error
Component: bez / pdinst_s_pdinst_util
Action: If the failing library is supplied as part of
Tivoli Access Manager, retry the operation. If the
problem persists, contact your IBM service
representative.
Name: ivauthn_invalid_dll
Number: 0x13212067 (320938087)
Severity: Error
Component: ias / ivauthn_s_general
HPDIA0100E An internal error has occurred.
Explanation: The authentication switch encountered
an unexpected internal error.
Action: Retry the operation. If the problem persists
contact your IBM service representative.
HPDIA0104E The authentication mechanism is
incorrectly specified.
Explanation: The authentication mechanism is not
specified or invalid in the .conf configuration file.
Number: 0x13212064 (320938084)
Action: Make sure the correct authentication
mechanism is specified in the [authenticationmechanisms] stanza of the .conf configuration file.
Severity: Error
Name: ivauthn_invalid_mechanism
Component: ias / ivauthn_s_general
Number: 0x13212068 (320938088)
Name: ivauthn_internal_error
Severity: Error
HPDIA0101E An unexpected error code was
encountered.
Component: ias / ivauthn_s_general
Explanation: The authentication switch encountered
an unexpected error code.
HPDIA0105W Invalid authentication method.
Action: Retry the failing operation. If the problem
persists, contact your IBM service representative.
Explanation: The specified authentication method is
either invalid or unsupported in the current product
configuration.
Name: ivauthn_unknown_error
Number: 0x13212065 (320938085)
Action: Verify the validity of the specified
authentication method.
Severity: Error
Name: ivauthn_invalid_method
Component: ias / ivauthn_s_general
Number: 0x13212069 (320938089)
Severity: Warning
HPDIA0102E Unable to open shared library.
Explanation: An attempt to open a shared library
failed.
Action: Make sure that the path to the shared library
is correct, or if the full path is not specified make sure
that the library is present in /usr/lib on UNIX systems
or is in the path on Windows systems.
Name: ivauthn_cant_open_dll
Number: 0x13212066 (320938086)
150
Error Message Reference
Component: ias / ivauthn_s_general
HPDIA0110E An authentication mechanism module
specific error occurred.
Explanation: A configured authentication mechanism
module generated an unexpected error.
Action: If the failing authentication mechanism
module is supplied as part of Tivoli Access Manager,
retry the operation. If the problem persists, contact
your IBM service representative.
Name: ivauthn_mechanism_error
Number: 0x1321206e (320938094)
Severity: Error
Component: ias / ivauthn_s_general
HPDIA0111E A memory allocation call failed.
Explanation: In most cases this error due to the
application program running out of memory.
Action: Ensure that the application has been
configured with sufficient virtual memory for its
requirements. The Tivoli Access Manager Performance
Tuning Guide contains instructions on how to ensure
that the application is configured with the correct a
mount of virtual memory. Stop and restart the process.
If the problem persists then contact your IBM service
representative.
Name: ivauthn_out_of_memory
Number: 0x1321206f (320938095)
Severity: Error
Component: ias / ivauthn_s_general
HPDIA0112E The current authentication module
operation terminated due to an
exception.
Explanation: See message.
Action: Retry the failing operation. If the problem
persists, contact your IBM service representative.
Name: ivauthn_operation_aborted
Number: 0x13212070 (320938096)
HPDIA0114E Could not acquire a client credential.
Explanation: A request to create a client credential
was denied by the Tivoli Access Manager Authorization
API.
Action: Retry the failing operation. If the problem
persists, contact your IBM service representative.
Name: ivauthn_get_cred_failed2
Number: 0x13212072 (320938098)
Severity: Error
Component: ias / ivauthn_s_general
HPDIA0115E Unknown identity type.
Explanation: Unrecognized identity information
returned from an authentication mechanism module.
Action: Check the identity information returned from
the module and, if the failing authentication
mechanism module is supplied as part of Tivoli Access
Manager, retry the failing operation. If the problem
persists, contact your IBM service representative.
Name: ivauthn_unknown_identity_type
Number: 0x13212073 (320938099)
Severity: Error
Component: ias / ivauthn_s_general
HPDIA0116E Can’t load extended attributes into the
client credential.
Explanation: Tivoli Access Manager was unable to
annotate the client credentials with extended attributes
returned from an authentication mechanism module.
Severity: Error
Action: Retry the failing operation. If the problem
persists, contact your IBM service representative.
Component: ias / ivauthn_s_general
Name: ivauthn_cant_load_xattrs
Number: 0x13212074 (320938100)
HPDIA0113E Could not acquire a client credential.
Major status = 0x%8.8lx, minor status =
0x%8.8lx
Explanation: A request to create a client credential
was denied by the Tivoli Access Manager Authorization
API.
Action: Retry the failing operation. If the problem
persists, contact your IBM service representative.
Name: ivauthn_get_cred_failed
Number: 0x13212071 (320938097)
Severity: Error
Component: ias / ivauthn_s_general
Severity: Error
Component: ias / ivauthn_s_general
HPDIA0117E Can’t select authentication mechanism.
Explanation: Tivoli Access Manager was unable to
authenticate a client because no suitable authentication
mechanisms are configured.
Action: Make sure the correct authentication
mechanism is configured in the [authenticationmechanisms] stanza of the .conf configuration file.
Name: ivauthn_cant_select_mechanism
Number: 0x13212075 (320938101)
Severity: Error
Chapter 1. Tivoli Access Manager Base Messages
151
Component: ias / ivauthn_s_general
HPDIA0118W Authentication method is not
supported.
Explanation: Tivoli Access Manager was unable to
authenticate a client because the authentication method
employed is not supported.
Action: Use a different authentication method.
Name: ivauthn_unsupported_method
Number: 0x13212076 (320938102)
Severity: Warning
Component: ias / ivauthn_s_general
HPDIA0122E Unable to open shared library %s: %s.
Explanation: An attempt to open a shared library
failed.
Action: Examine the reason given in the error
message, and attempt to correct the problem. Make
sure that the path to the shared library is correct, or if
the full path is not specified make sure that the library
is present in /usr/lib on UNIX systems or is in the
path on Windows systems.
Name: ivauthn_dll_open_failed
Number: 0x1321207a (320938106)
Severity: Error
Component: ias / ivauthn_s_general
HPDIA0119W Authentication mechanism is not
available.
Explanation: Tivoli Access Manager was unable to
authenticate a client because the authentication
mechanism is currently out of service.
Action: Make sure the registry server (LDAP server,or
DOMINO server, or other type of registry server) is up
running.
HPDIA0123E Unable to locate symbol %s in shared
library %s: %s.
Explanation: An attempt to retrieve a symbol from a
shared library failed, probably because the symbol was
not found. The most probable reason for the error is
that the library was built incorrectly.
Number: 0x13212077 (320938103)
Action: If the failing library is supplied as part of
Tivoli Access Manager, retry the operation. If the
problem persists, contact your IBM service
representative.
Severity: Warning
Name: ivauthn_cant_find_symbol
Component: ias / ivauthn_s_general
Number: 0x1321207b (320938107)
Name: ivauthn_mechanism_down
Severity: Error
HPDIA0120W Not authorized to perform the current
operation.
Component: ias / ivauthn_s_general
Explanation: See message.
HPDIA0125W Authentication method (%s) is not
supported.
Action: An authorization decision result. No action is
required.
Name: ivauthn_authorization_failure
Number: 0x13212078 (320938104)
Severity: Warning
Component: ias / ivauthn_s_general
Explanation: Tivoli Access Manager was unable to
authenticate a client because the authentication method
employed is not supported.
Action: Use a different authentication method.
Name: ivauthn_unsupported_method2
Number: 0x1321207d (320938109)
HPDIA0121W The requested operation is not valid.
Severity: Warning
Explanation: Access Manager was unable to perform a
requested operation because it is not valid. An example
would be a token authentication user attempting to
change their password
Component: ias / ivauthn_s_general
Action: Consult documentation for operation.
Explanation: Tivoli Access Manager was unable to
authenticate a client because the authentication method
employed is not configured.
Name: ivauthn_invalid_operation
Number: 0x13212079 (320938105)
Severity: Warning
Component: ias / ivauthn_s_general
152
Error Message Reference
HPDIA0126W Authentication method (%s) is not
configured.
Action: Make sure the employed authentication
method is configured in the [authenticationmechanisms] stanza of the .conf configuration file.
Name: ivauthn_unconfiged_method
Number: 0x132120c9 (320938185)
Number: 0x1321207e (320938110)
Severity: Warning
Severity: Warning
Component: ias / ivauthn_s_authsvc
Component: ias / ivauthn_s_general
HPDIA0127W User %s is not authorized to perform
the current operation.
Explanation: See message.
Action: An authorization decision result. No action is
required.
Name: ivauthn_authorization_failure2
Number: 0x1321207f (320938111)
Severity: Warning
Component: ias / ivauthn_s_general
HPDIA0128W The requested operation by user %s is
not valid.
Explanation: Access Manager was unable to perform a
requested operation because it is not valid. An example
would be a token authentication user attempting to
change their password
Action: Consult documentation for operation.
Name: ivauthn_invalid_operation2
Number: 0x13212080 (320938112)
HPDIA0202W An unknown user name was
presented to Access Manager.
Explanation: Tivoli Access Manager could not locate
the supplied user name in the authentication registry.
Action: Check the supplied user name information
and try again.
Name: ivauthn_invalid_username
Number: 0x132120ca (320938186)
Severity: Warning
Component: ias / ivauthn_s_authsvc
HPDIA0203W Authentication retry limit reached.
Explanation: The user has performed too many
consecutive invalid authentication attempts.
Action: Contact your Tivoli Access Manager
administrator.
Name: ivauthn_retry_limit_reached
Number: 0x132120cb (320938187)
Severity: Warning
Component: ias / ivauthn_s_authsvc
Severity: Warning
Component: ias / ivauthn_s_general
HPDIA0204W The user’s password has expired.
Explanation: See message.
HPDIA0200W Authentication failed. You have used
an invalid user name, password or client
certificate.
Explanation: See message.
Action: Check your authentication information and try
again.
Name: ivauthn_authentication_failure
Action: Contact your Tivoli Access Manager
administrator, and change your password.
Name: ivauthn_password_expired
Number: 0x132120cc (320938188)
Severity: Warning
Component: ias / ivauthn_s_authsvc
Number: 0x132120c8 (320938184)
Severity: Warning
Component: ias / ivauthn_s_authsvc
HPDIA0201W The client supplied invalid
authentication information.
HPDIA0205W The user’s account has expired.
Explanation: See message.
Action: Contact your Tivoli Access Manager
administrator.
Name: ivauthn_account_expired
Explanation: Invalid authentication information was
presented to Tivoli Access Manager.
Number: 0x132120cd (320938189)
Action: Check the format of the authentication
information and try again.
Component: ias / ivauthn_s_authsvc
Severity: Warning
Name: ivauthn_bad_authentication_info
Chapter 1. Tivoli Access Manager Base Messages
153
HPDIA0206W Login rejected due to policy violation.
Action: Check the login data, registry, or mapping
function.
Explanation: Login rejected due to policy enforced for
the account.
Name: ivauthn_mapping_failed
Action: Contact your Access Manager network
administrator.
Name: ivauthn_login_policy_violation
Number: 0x132120d2 (320938194)
Severity: Warning
Component: ias / ivauthn_s_authsvc
Number: 0x132120ce (320938190)
Severity: Warning
Component: ias / ivauthn_s_authsvc
HPDIA0207W A PIN must be assigned to enable
account
Explanation: A PIN must be assigned to enable
account
Action: Contact system administrator to assign new
PIN
HPDIA0211W A client certificate could not be
authenticated.
Explanation: A client certificate could not be
authenticated.
Action: Check the client certificate
Name: ivauthn_certificate_auth_failure
Number: 0x132120d3 (320938195)
Severity: Warning
Component: ias / ivauthn_s_authsvc
Name: ivauthn_new_pin
Number: 0x132120cf (320938191)
Severity: Warning
Component: ias / ivauthn_s_authsvc
HPDIA0208W User’s account has been disabled.
Explanation: See message.
Action: Contact your Tivoli Access Manager
administrator.
Name: ivauthn_account_disabled
Number: 0x132120d0 (320938192)
HPDIA0212W The data contained in the HTTP
header %s failed authentication.
Explanation: The request an HTTP header that Access
Manager was configured to use as authentication data.
This data failed authentication.
Action: Check the request, the proxy server (if one is
used), and the mapping library
Name: ivauthn_http_header_auth_failure
Number: 0x132120d4 (320938196)
Severity: Warning
Component: ias / ivauthn_s_authsvc
Severity: Warning
Component: ias / ivauthn_s_authsvc
HPDIA0214W IP address based authentication failed
HPDIA0209W Next token required for authentication
Explanation: Access Manager is configured to
authenticate using the client IP address, which was
either unavailable or invalid
Explanation: Next token required for authentication
Action: Enter next token
Name: ivauthn_next_token
Number: 0x132120d1 (320938193)
Severity: Warning
Component: ias / ivauthn_s_authsvc
HPDIA0210W The login data entered could not be
mapped to an Access Manager user
Explanation: A mapping function, such as that in a
library or CDAS, failed to map the login information to
an Access Manager user.
Action: Check Access Manager configuration and/or
authentication library
Name: ivauthn_ip_addr_auth_failed
Number: 0x132120d6 (320938198)
Severity: Warning
Component: ias / ivauthn_s_authsvc
HPDIA0215E The supplied username does not exist
in the registry.
Explanation: The administrator attempting to SU
entered a username which does not exist in the registry.
Action: Verify that username exists in user registry.
154
Error Message Reference
Name: ivauthn_su_invalid_username
Number: 0x132120d7 (320938199)
Severity: Error
Component: ias / ivauthn_s_authsvc
Action: Check the supplied user name information
and try again.
Name: ivauthn_invalid_username2
Number: 0x132120db (320938203)
Severity: Warning
HPDIA0216E Administrator does not have
permission to su to this account.
Component: ias / ivauthn_s_authsvc
Explanation: The administrator attempted to SU to a
privileged user, and the authentication mechanism did
not allow them to do so.
HPDIA0220I Authentication requires continuation
before completion status can be
determined.
Action: Make sure that the administrator has the
permissions needed to switch username to the desired
account.
Explanation: The authentication mechianism needs
further interaction with the client to negotiate
successful authentication.
Name: ivauthn_su_no_perms
Action:
Number: 0x132120d8 (320938200)
Name: ivauthn_continue_needed
Severity: Error
Number: 0x132120dc (320938204)
Component: ias / ivauthn_s_authsvc
Severity: Notice
Component: ias / ivauthn_s_authsvc
HPDIA0217W Authentication by user %s denied at
this time of day.
Explanation: A user attempted to authenticate during
a time of day when his/her account is restricted.
Action: Contact your Tivoli Access Manager
administrator to validate or change the time of day for
which this user is allowed to authenticate.
Name: ivauthn_tod_denied_user
Number: 0x132120d9 (320938201)
Severity: Warning
Component: ias / ivauthn_s_authsvc
HPDIA0218W Authentication by user denied at this
time of day.
Explanation: A user attempted to authenticate during
a time of day when his/her account is restricted.
Action: Contact your Tivoli Access Manager
administrator to validate or change the time of day for
which this user is allowed to authenticate.
Name: ivauthn_tod_denied
Number: 0x132120da (320938202)
Severity: Warning
Component: ias / ivauthn_s_authsvc
HPDIA0219W An unknown user, %s, was presented
to Tivoli Access Manager.
Explanation: Tivoli Access Manager could not locate
the user name in the authentication registry.
HPDIA0221W Authentication for user %s failed. You
have used an invalid user name,
password or client certificate.
Explanation: See message.
Action: Check your authentication information and try
again.
Name: ivauthn_authentication_failure2
Number: 0x132120dd (320938205)
Severity: Warning
Component: ias / ivauthn_s_authsvc
HPDIA0222W The client, %s, supplied invalid
authentication information.
Explanation: Invalid authentication information was
presented to Tivoli Access Manager.
Action: Check the format of the authentication
information and try again.
Name: ivauthn_bad_authentication_info2
Number: 0x132120de (320938206)
Severity: Warning
Component: ias / ivauthn_s_authsvc
HPDIA0223W The authentication retry limit for user
%s was reached.
Explanation: The user has performed too many
consecutive invalid authentication attempts.
Chapter 1. Tivoli Access Manager Base Messages
155
Action: Contact your Tivoli Access Manager
administrator.
Component: ias / ivauthn_s_authsvc
Name: ivauthn_retry_limit_reached2
HPDIA0228W A client certificate for user %s could
not be authenticated.
Number: 0x132120df (320938207)
Severity: Warning
Component: ias / ivauthn_s_authsvc
Explanation: See message.
Action: Check the client certificate
Name: ivauthn_certificate_auth_failure2
HPDIA0224W The password for user %s has expired.
Number: 0x132120e4 (320938212)
Explanation: See message.
Severity: Warning
Action: Contact your Tivoli Access Manager
administrator, and change your password.
Component: ias / ivauthn_s_authsvc
Name: ivauthn_password_expired2
HPDIA0229W IP address authentication failed for
address %s.
Number: 0x132120e0 (320938208)
Component: ias / ivauthn_s_authsvc
Explanation: Access Manager is configured to
authenticate using the client IP address, which was
either unavailable or invalid
HPDIA0225W The account for user %s has expired.
Action: Check Access Manager configuration, or
authentication library
Explanation: See message.
Name: ivauthn_ip_addr_auth_failed2
Action: Contact your Tivoli Access Manager
administrator.
Number: 0x132120e5 (320938213)
Severity: Warning
Name: ivauthn_account_expired2
Severity: Warning
Component: ias / ivauthn_s_authsvc
Number: 0x132120e1 (320938209)
Severity: Warning
Component: ias / ivauthn_s_authsvc
HPDIA0226W The login for user %s was rejected
due to a policy violation.
Explanation: Login rejected due to policy enforced for
the account.
Action: Contact your Access Manager network
administrator.
Name: ivauthn_login_policy_violation2
HPDIA0230E The supplied username %s does not
exist in the registry.
Explanation: The administrator attempting to use the
switch username command and entered a username
that does not exist in the registry.
Action: Verify that username exists in user registry.
Name: ivauthn_su_invalid_username2
Number: 0x132120e6 (320938214)
Severity: Error
Component: ias / ivauthn_s_authsvc
Number: 0x132120e2 (320938210)
Component: ias / ivauthn_s_authsvc
HPDIA0231E Administrator %s does not have
permission to use switch username on
this account.
HPDIA0227W The account for user %s has been
disabled.
Explanation: The administrator attempted to SU to a
privileged user, and the authentication mechanism did
not allow them to do so.
Severity: Warning
Explanation: See message.
Action: Contact your Tivoli Access Manager
administrator.
Action: Make sure that the administrator has the
permissions needed to switch username to the desired
account.
Name: ivauthn_account_disabled2
Name: ivauthn_su_no_perms2
Number: 0x132120e3 (320938211)
Number: 0x132120e7 (320938215)
Severity: Warning
Severity: Error
156
Error Message Reference
Component: ias / ivauthn_s_authsvc
HPDIA0232W The data contained in the HTTP
header failed authentication.
Explanation: The request an HTTP header that Access
Manager was configured to use as authentication data.
This data failed authentication.
Action: Check the request, the proxy server (if one is
used), and the mapping library
HPDIA0235W Authentication for user %s failed. You
have used an invalid password. This
account has been temporarily locked
due to too many failed login attempts.
Explanation: The Tivoli Access Manager administrator
has set a disable-time-interval to lock this account
when the maximum number of login failures is
exceeded.
Number: 0x132120e8 (320938216)
Action: Check your password and wait until
disable-time-interval has elapsed, or contact your Tivoli
Access Manager administrator to unlock and enable
login to the account.
Severity: Warning
Name: ivauthn_passwd_invalid_acct_ lockedout2
Component: ias / ivauthn_s_authsvc
Number: 0x132120eb (320938219)
Name: ivauthn_http_header_auth_failure2
Severity: Warning
HPDIA0233W Authentication failed. You have used
an invalid password. This account has
been temporarily locked due to too
many failed login attempts.
Explanation: The Tivoli Access Manager administrator
has set a disable-time-interval to lock this account
when the maximum number of login failures is
exceeded.
Action: Check your password and wait until
disable-time-interval has elapsed, or contact your Tivoli
Access Manager administrator to unlock and enable
login to the account.
Name: ivauthn_passwd_invalid_acct_ lockedout
Number: 0x132120e9 (320938217)
Severity: Warning
Component: ias / ivauthn_s_authsvc
Component: ias / ivauthn_s_authsvc
HPDIA0236W Authentication for user %s failed. You
have used an invalid password. This
account has been disabled due to too
many failed login attempts.
Explanation: The Tivoli Access Manager administrator
has set a disable-time-interval to disable this account
when the maximum number of login failures is
exceeded.
Action: Check your password and contact your Tivoli
Access Manager administrator to enable this account.
Name: ivauthn_passwd_invalid_acct_ disabled2
Number: 0x132120ec (320938220)
Severity: Warning
Component: ias / ivauthn_s_authsvc
HPDIA0234W Authentication failed. You have used
an invalid password. This account has
been disabled due to too many failed
login attempts.
Explanation: The Tivoli Access Manager administrator
has set a disable-time-interval to disable this account
when the maximum number of login failures is
exceeded.
Action: Check your password and contact your Tivoli
Access Manager administrator to enable this account.
HPDIA0300W Password rejected due to policy
violation.
Explanation: A password violates the rules for valid
passwords set in a policy for the account.
Action: Contact your Tivoli Access Manager
administrator for a list of password policies.
Name: ivauthn_passwd_policy_violation
Number: 0x1321212c (320938284)
Name: ivauthn_passwd_invalid_acct_ disabled
Severity: Warning
Number: 0x132120ea (320938218)
Component: ias / ivauthn_s_passmgmt
Severity: Warning
Component: ias / ivauthn_s_authsvc
HPDIA0301W Password rejected due to minimum
length policy.
Explanation: A password does not meet the minimum
length requirement set in a policy for the account.
Action: Contact your Tivoli Access Manager
Chapter 1. Tivoli Access Manager Base Messages
157
administrator for a list of password policies.
Name: ivauthn_passwd_too_short
Number: 0x1321212d (320938285)
Severity: Warning
Component: ias / ivauthn_s_passmgmt
HPDIA0302W Password rejected due to the spaces
policy.
Explanation: A password does not meet the spaces
requirement set in a policy for the account.
Action: Contact your Tivoli Access Manager
administrator for a list of password policies.
Name: ivauthn_passwd_has_spaces
Number: 0x1321212e (320938286)
Severity: Warning
non-alphabetic characters requirement set in a policy
for the account.
Action: Contact your Tivoli Access Manager
administrator for a list of password policies.
Name: ivauthn_passwd_too_few_nonalphas
Number: 0x13212131 (320938289)
Severity: Warning
Component: ias / ivauthn_s_passmgmt
HPDIA0306W This account has been temporarily
locked out due to too many failed login
attempts.
Explanation: The Tivoli Access Manager administrator
has set a disable-time-interval to disable this account
when the maximum number of login failures is
exceeded.
Component: ias / ivauthn_s_passmgmt
Action: Wait until disable-time-interval has elapsed, or
contact your Tivoli Access Manager administrator to
unlock and enable login to the account.
HPDIA0303W Password rejected due to the
maximum repeated characters policy.
Name: ivauthn_passwd_acct_lockedout
Explanation: A password does not meet the maximum
repeated characters requirement set in a policy for the
account.
Action: Contact your Tivoli Access Manager
administrator for a list of password policies.
Name: ivauthn_passwd_too_many_repeated
Number: 0x1321212f (320938287)
Severity: Warning
Component: ias / ivauthn_s_passmgmt
HPDIA0304W Password rejected due to the
minimum alphabetic characters policy.
Explanation: A password does not meet the minimum
alphabetic characters requirement set in a policy for the
account.
Action: Contact your Tivoli Access Manager
administrator for a list of password policies.
Name: ivauthn_passwd_too_few_alphas
Number: 0x13212132 (320938290)
Severity: Warning
Component: ias / ivauthn_s_passmgmt
HPDIA0307W Post password change processing for
user %s failed.
Explanation: A configured post password change
processing module returned a failure status.
Action: Check the post password change processing
module’s log file.
Name: ivauthn_post_pwdchg_failed
Number: 0x13212133 (320938291)
Severity: Warning
Component: ias / ivauthn_s_passmgmt
HPDIA0308I Post password change processing for
user %s was successful.
Number: 0x13212130 (320938288)
Explanation: A configured post password change
processing module returned a successful status.
Severity: Warning
Action: No action is required.
Component: ias / ivauthn_s_passmgmt
Name: ivauthn_post_pwdchg_success
Number: 0x13212134 (320938292)
HPDIA0305W Password rejected due to the
minimum non-alphabetic characters
policy.
Explanation: A password does not meet the minimum
158
Error Message Reference
Severity: Notice
Component: ias / ivauthn_s_passmgmt
HPDIA0309W This account is disabled.
Explanation: This account is disabled in the user
registry. Logins will not succeed until the account is
enabled.
Action: Contact your Tivoli Access Manager
administrator to enable this account.
Name: ivauthn_passwd_acct_disabled
Number: 0x13212135 (320938293)
Severity: Warning
Component: ias / ivauthn_s_passmgmt
HPDIA0310W The password for user %s was
rejected due to policy violation.
Explanation: A password violates the rules for valid
passwords set in a policy for the account.
Action: Contact your Tivoli Access Manager
administrator for a list of password policies.
Name: ivauthn_passwd_policy_violation2
Number: 0x13212136 (320938294)
Severity: Warning
Component: ias / ivauthn_s_passmgmt
HPDIA0313W The password for user %s was
rejected due to the maximum repeated
characters policy.
Explanation: A password does not meet the maximum
repeated characters requirement set in a policy for the
account.
Action: Contact your Tivoli Access Manager
administrator for a list of password policies.
Name: ivauthn_passwd_too_many_repeated2
Number: 0x13212139 (320938297)
Severity: Warning
Component: ias / ivauthn_s_passmgmt
HPDIA0314W The password for user %s was
rejected due to the minimum alphabetic
characters policy.
Explanation: A password does not meet the minimum
alphabetic characters requirement set in a policy for the
account.
Action: Contact your Tivoli Access Manager
administrator for a list of password policies.
Name: ivauthn_passwd_too_few_alphas2
Number: 0x1321213a (320938298)
HPDIA0311W The password for user %s was
rejected due to minimum length policy.
Explanation: A password does not meet the minimum
length requirement set in a policy for the account.
Action: Contact your Tivoli Access Manager
administrator for a list of password policies.
Name: ivauthn_passwd_too_short2
Number: 0x13212137 (320938295)
Severity: Warning
Component: ias / ivauthn_s_passmgmt
Severity: Warning
Component: ias / ivauthn_s_passmgmt
HPDIA0315W The password for user %s was
rejected due to the minimum
non-alphabetic characters policy.
Explanation: A password does not meet the minimum
non-alphabetic characters requirement set in a policy
for the account.
Action: Contact your Tivoli Access Manager
administrator for a list of password policies.
Name: ivauthn_passwd_too_few_nonalphas2
HPDIA0312W The password for user %s was
rejected due to the spaces policy.
Explanation: The password does not meet the spaces
requirement set in a policy for the account.
Action: Contact your Tivoli Access Manager
administrator for a list of password policies.
Name: ivauthn_passwd_has_spaces2
Number: 0x13212138 (320938296)
Severity: Warning
Component: ias / ivauthn_s_passmgmt
Number: 0x1321213b (320938299)
Severity: Warning
Component: ias / ivauthn_s_passmgmt
HPDIA0316W The account for user %s has been
temporarily locked due to too many
failed login attempts.
Explanation: The Tivoli Access Manager administrator
has set a disable-time-interval to disable this account
when the maximum number of login failures is
exceeded.
Action: Wait until disable-time-interval has elapsed, or
contact your Tivoli Access Manager administrator to
Chapter 1. Tivoli Access Manager Base Messages
159
unlock and enable login to the account.
Name: sdg_s_unknown_pwdchg_error
Name: ivauthn_passwd_acct_lockedout2
Number: 0x132121f6 (320938486)
Number: 0x1321213c (320938300)
Severity: Error
Severity: Warning
Component: ias / ivauthn_s_ssl
Component: ias / ivauthn_s_passmgmt
HPDJA0100E Invalid argument: Null context.
HPDIA0317W The account for user %s is disabled.
Explanation: This account is disabled in the user
registry. Logins will not succeed until the account is
enabled.
Action: Contact your Tivoli Access Manager
administrator to enable this account.
Name: ivauthn_passwd_acct_disabled2
Number: 0x1321213d (320938301)
Explanation: A nonnull context object is required to
communicate with the Tivoli Access Manager policy
server and define values for message and trace logging.
Action: Ensure that the context argument is nonnull.
Name: bja_invalid_ctxt
Number: 0x307a8064 (813334628)
Severity: Error
Component: bja / bja_s_general
Severity: Warning
Component: ias / ivauthn_s_passmgmt
HPDJA0101E Invalid argument: Null messages.
HPDIA0500W Authentication failure (error status
0x%x).
Explanation: A nonnull PDMessages object is required
to hold any return messages that might be generated
during the operation. Typically, this object contains no
messages on input.
Explanation: An error occurred that was outside the
bounds of expected authentication errors.
Action: Contact your IBM service representative with
the given error status.
Name: sdg_s_unknown_authn_error
Number: 0x132121f4 (320938484)
Action: Ensure that the messages argument is nonnull.
Name: bja_invalid_msgs
Number: 0x307a8065 (813334629)
Severity: Error
Component: bja / bja_s_general
Severity: Warning
Component: ias / ivauthn_s_ssl
HPDJA0102E Invalid argument: Null or zero-length
user or group name.
HPDIA0501E Authentication failed for user %s (error
status 0x%x).
Explanation: A valid, nonnull name is required.
Explanation: An error occurred that was outside the
bounds of expected authentication errors.
Action: Contact your IBM service representative with
the given error status.
Name: sdg_s_unknown_authn_error2
Number: 0x132121f5 (320938485)
Severity: Error
Component: ias / ivauthn_s_ssl
HPDIA0502E Password change failed for user %s
(error status 0x%x).
Explanation: An error occurred that was outside the
bounds of expected authentication errors.
Action: Contact your IBM service representative with
the given error status.
160
Error Message Reference
Action: Ensure that the user or group name argument
is nonnull and has a positive length.
Name: bja_invalid_pdname
Number: 0x307a8066 (813334630)
Severity: Error
Component: bja / bja_s_general
HPDJA0103E Invalid argument: Null or zero-length
registry name.
Explanation: A valid, nonnull registry name is
required.
Action: Ensure that the registry name argument is
nonnull and that the name returned by its
getRgyName() method is nonnull and has a positive
length.
Name: bja_invalid_rgyname
Number: 0x307a8067 (813334631)
Severity: Error
HPDJA0108E Invalid argument: Null configuration
URL.
Explanation: A valid, nonnull password is required.
Explanation: A valid, nonnull URL is required. In
addition, the caller must have adequate permission to
access and read the URL. The configuration data in the
URL must be in the proper format and must contain all
the data necessary to locate and communicate with a
Tivoli Access Manager policy server.
Action: Ensure that the password argument is nonnull
and has a positive length.
Action: Ensure that the configuration URL argument
is nonnull.
Name: bja_invalid_pwd
Name: bja_invalid_cfgurl
Number: 0x307a8068 (813334632)
Number: 0x307a806c (813334636)
Severity: Error
Severity: Error
Component: bja / bja_s_general
Component: bja / bja_s_general
HPDJA0105E Invalid argument: Null or zero-length
pattern.
HPDJA0109W A nonnull value is being passed to an
unsupported argument.
Explanation: A valid, nonnull pattern is required.
Explanation: The method being invoked has one or
more unsupported arguments. A nonnull value is being
passed for an unsupported argument.
Component: bja / bja_s_general
HPDJA0104E Invalid argument: Null or zero-length
password.
Action: Ensure that the pattern argument is nonnull
and has a positive length.
Name: bja_invalid_pattern
Number: 0x307a8069 (813334633)
Severity: Error
Component: bja / bja_s_general
HPDJA0106E Invalid argument: Negative maximum
return number.
Explanation: The number of returned items must be
nonnegative.
Action: Ensure that the maximum return argument is
greater than or equal to 0.
Name: bja_invalid_maxreturn
Number: 0x307a806a (813334634)
Severity: Error
Component: bja / bja_s_general
HPDJA0107E Invalid argument: Null locale.
Explanation: A valid, nonnull locale is required. To
use the default locale, use the method that does not
take a locale argument.
Action: Ensure that the locale argument is nonnull.
Name: bja_invalid_locale
Action: Ensure that a value of null is passed for
unsupported arguments. Refer to product
documentation to find out what arguments are
unsupported for the method being invoked.
Name: bja_unsupported_argument
Number: 0x307a806d (813334637)
Severity: Warning
Component: bja / bja_s_general
HPDJA0110E Invalid data received from the Tivoli
Access Manager policy server.
Explanation: The data received from the Tivoli Access
Manager policy server is invalid. Required values
might be missing or the values might have been
corrupted during transmission. Data values might be
missing because the policy server is incompatible with
the client.
Action: Ensure the Tivoli Access Manager policy
server supports the release level of the client. If the
policy server is compatible with the client, try the
operation again.
Name: bja_bad_management_server_data
Number: 0x307a806e (813334638)
Severity: Error
Component: bja / bja_s_general
Number: 0x307a806b (813334635)
Severity: Error
Component: bja / bja_s_general
Chapter 1. Tivoli Access Manager Base Messages
161
HPDJA0111W The component has not been
initialized or has already been shut
down.
Name: bja_invalid_attributename
Number: 0x307a8072 (813334642)
Severity: Error
Explanation: The shutdown() method was called on a
component that has already been shut down or was
never initialized.
Component: bja / bja_s_general
Action: No action is required.
HPDJA0115E Invalid argument: Null attribute value.
Name: bja_comp_not_inited
Explanation: A nonnull attribute value is required.
Number: 0x307a806f (813334639)
Action: Ensure that the attribute value argument is
nonnull.
Severity: Warning
Component: bja / bja_s_general
HPDJA0112W The component has already been
initialized.
Explanation: The initialize() method of a component
initialization class might be called more than once, but
only the first caller sets the program name for the
component log output.
Action: No action is required, but the program name
might differ from what is expected. Use the
getProgramName() method to determine the program
name that appears in the component message and trace
log output.
Name: bja_comp_already_inited
Name: bja_invalid_attributevalue
Number: 0x307a8073 (813334643)
Severity: Error
Component: bja / bja_s_general
HPDJA0116E Cannot contact server.
Explanation: The client cannot connect to the server.
This can mean that the server process is not running or
that network connectivity does not exist between the
client and server machines due to network partitioning
caused by an intervening firewall or a nonfunctional
intermediate router. The server address and port can be
found in the trace log file.
Severity: Warning
Action: Ensure that network connectivity exists
between the client and server machines (issue a ping,
for example) and verify that the server process is
running on the expected port.
Component: bja / bja_s_general
Name: bja_cannot_contact_server
Number: 0x307a8070 (813334640)
Number: 0x307a8074 (813334644)
HPDJA0113W The component was not shut down.
There might be other users.
Severity: Error
Explanation: Several calls might have been made to
initialize a component using the initialize() method.
The component is shut down only after the same
number of calls have been made to the shutdown()
method. Each program that calls the initialize() method
should also call the shutdown() method.
Component: bja / bja_s_general
Action: No action is required.
Action: Ensure that the description argument is
nonnull.
Name: bja_comp_not_shutdown
Number: 0x307a8071 (813334641)
Severity: Warning
Component: bja / bja_s_general
HPDJA0114E Invalid argument: Null or zero-length
attribute name.
Explanation: A valid, nonnull attribute name is
required.
Action: Ensure that the attribute name argument is
nonnull and has a positive length.
162
Error Message Reference
HPDJA0117E Invalid argument: Null description
text.
Explanation: A nonnull description value is required.
Name: bja_invalid_description
Number: 0x307a8075 (813334645)
Severity: Error
Component: bja / bja_s_general
HPDJA0118E Invalid argument: Port number is less
than or equal to 0.
Explanation: Only port numbers greater than 0 are
valid. It is usually good practice to assign port numbers
greater than 1024 to user applications because many
systems reserve port numbers below that value for
special purposes.
Action: Ensure that the input port number is greater
than 0.
Name: bja_invalid_port
Number: 0x307a8076 (813334646)
Severity: Error
Component: bja / bja_s_general
HPDJA0119E Invalid argument: Null or zero-length
server host name.
HPDJA0122E Unknown message code: %s.
Explanation: The text for the message code could not
be found in the message catalogs installed on the local
system. This typically means that the policy server is at
a more recent level than the client and has returned a
code undefined in the client runtime. The
documentation associated with the policy server
installation should include the message code.
Action: Consult the Error Message Reference to obtain
the message text, explanation, and suggested actions
for the message code.
Name: bja_unknown_msgcode
Explanation: A valid, nonnull host name is required.
Number: 0x307a807a (813334650)
Action: Ensure that the server host name argument is
nonnull and has a positive length.
Severity: Error
Component: bja / bja_s_general
Name: bja_invalid_hostname
Number: 0x307a8077 (813334647)
HPDJA0123E Invalid argument: Null properties.
Severity: Error
Explanation: A valid, nonnull properties object is
required.
Component: bja / bja_s_general
HPDJA0120W The outData information received
from the policy server was not returned
because the input outData parameter is
null.
Explanation: A nonnull outData argument is required
to return outData information received from the policy
server.
Action: Ensure the outData argument is nonnull.
Name: bja_invalid_outdata
Number: 0x307a8078 (813334648)
Severity: Warning
Component: bja / bja_s_general
Action: Ensure that the properties argument is
nonnull.
Name: bja_invalid_properties
Number: 0x307a807b (813334651)
Severity: Error
Component: bja / bja_s_general
HPDJA0124E Invalid argument: Null or zero-length
credentials.
Explanation: A valid, nonnull credentials array is
required.
Action: Ensure that the delegated credentials
argument is nonnull and has a positive length.
Name: bja_invalid_creds
HPDJA0121I Admin Service plugin status: %s.
Number: 0x307a807c (813334652)
Explanation: This is the status returned from an
Admin Service plugin.
Severity: Error
Action: Refer to the plugin documentation or contact
IBM service.
Name: bja_admsvc_pluginstatus
Number: 0x307a8079 (813334649)
Severity: Notice
Component: bja / bja_s_general
Component: bja / bja_s_general
HPDJA0125E The data for %s that was received from
the Tivoli Access Manager policy server
is not valid.
Explanation: The data received from the Tivoli Access
Manager policy server is not valid. Required values
might be missing or the values might have been
garbled during transmission. Data values might be
missing because the policy server is incompatible with
the client.
Action: Ensure that the Tivoli Access Manager policy
server supports the release level of the client. If the
Chapter 1. Tivoli Access Manager Base Messages
163
policy server is compatible with the client, try the
operation again.
Name: bja_bad_management_server_data_s
Number: 0x307a807d (813334653)
Severity: Error
Component: bja / bja_s_general
HPDJA0200E Invalid operation: The current object
does not represent a Tivoli Access
Manager user.
Explanation: An operation was attempted on a
PDUser object that represents a user that exists in the
user registry but is undefined in Tivoli Access Manager.
Therefore, certain Tivoli Access Manager operations are
invalid.
Action: Ensure that the user this object represents is
defined in Tivoli Access Manager. That is, there must
be a user defined to the Tivoli Access Manager policy
server with the registry name used to instantiate this
object.
Name: bja_not_pduser
Number: 0x307a80c8 (813334728)
Severity: Error
Component: bja / bja_s_user
HPDJA0201E Invalid argument: The user name
object is not a valid type or is
zero-length.
HPDJA0300E Invalid operation: The current object
does not represent a Tivoli Access
Manager group.
Explanation: An operation was attempted on a
PDGroup object that represents a group that exists in
the user registry but is undefined in Tivoli Access
Manager. Therefore, certain Tivoli Access Manager
operations are invalid.
Action: Ensure that the group this object represents is
defined in Tivoli Access Manager. That is, there must
be a group defined to the Tivoli Access Manager policy
server with the registry name used to instantiate this
object.
Name: bja_not_pdgroup
Number: 0x307a812c (813334828)
Severity: Error
Component: bja / bja_s_group
HPDJA0301E Invalid argument: The group name
object is not a valid type or is
zero-length.
Explanation: The input group name argument can be
a String object representing a Tivoli Access Manager
group name or an instance of the PDRgyGroupName
class if the name being specified is a registry name. No
other object types are allowed. If the input name
argument is a String, it must have a positive length. If
the input name is a PDRgyGroupName object, the
String returned from its getRgyName() method must be
nonnull and have a positive length.
Explanation: The input user name argument can be a
String object representing a Tivoli Access Manager user
name or an instance of the PDRgyUserName class if
the name being specified is a registry name. No other
object types are allowed. If the input name argument is
a String, it must have a positive length. If the input
name is a PDRgyUserName object, the String returned
from its getRgyName() method must be nonnull and
have a positive length.
Action: Ensure that the group name argument is an
instance of the String class for Tivoli Access Manager
group names or an instance of the PDRgyGroupName
class for registry names. Ensure the input String or the
name returned from the PDRgyGroupName object
getRgyName() method is nonnull and has a positive
length.
Action: Ensure that the user name argument is an
instance of the String class for Tivoli Access Manager
user names or an instance of the PDRgyUserName
class for registry names. Ensure the input String or the
name returned from the PDRgyUserName object
getRgyName() method is nonnull and has a positive
length.
Number: 0x307a812d (813334829)
Name: bja_invalid_username
Number: 0x307a80c9 (813334729)
Severity: Error
Component: bja / bja_s_user
Name: bja_invalid_groupname
Severity: Error
Component: bja / bja_s_group
HPDJA0302E Invalid argument: Null or empty
member name list.
Explanation: At least one valid, nonnull member
name is required.
Action: Ensure that the member name list argument is
nonnull and has at least one member.
Name: bja_invalid_membernames
Number: 0x307a812e (813334830)
164
Error Message Reference
Severity: Error
Component: bja / bja_s_group
Action: Ensure that the maximum password age
argument is greater than or equal to 0.
Name: bja_invalid_maxpwdage
HPDJA0400E Invalid argument: The maximum
number of login failures is outside of
the allowed range.
Explanation: The maximum number of login failures
is enforced to be a nonnegative integer.
Action: Ensure that the maximum number of login
failures argument is greater than or equal to 0.
Name: bja_invalid_maxlgnfails
Number: 0x307a8190 (813334928)
Severity: Error
Component: bja / bja_s_policy
Number: 0x307a8193 (813334931)
Severity: Error
Component: bja / bja_s_policy
HPDJA0404E Invalid argument: The maximum
repeated characters argument is outside
of the allowed range.
Explanation: The range of the maximum repeated
characters value is enforced to be a nonnegative integer.
Action: Ensure that the maximum repeated characters
argument is greater than or equal to 0.
Name: bja_invalid_maxrepchars
HPDJA0401E Invalid argument: The account-disable
time interval argument is outside of the
allowed range.
Explanation: The account-disable time interval is
enforced to be an integer greater than or equal to 0
(where 0 indicates an unlimited time interval).
Action: Ensure that the account disable time interval
argument is greater than or equal to 0.
Name: bja_invalid_acctdisabletime
Number: 0x307a8191 (813334929)
Number: 0x307a8194 (813334932)
Severity: Error
Component: bja / bja_s_policy
HPDJA0405E Invalid argument: The minimum
alphabetic characters argument is
outside of the allowed range.
Explanation: The minimum alphabetic characters
value is enforced to be a nonnegative integer.
Severity: Error
Action: Ensure that the minimum alphabetic
characters argument is greater than or equal to 0.
Component: bja / bja_s_policy
Name: bja_invalid_minpwdalphas
Number: 0x307a8195 (813334933)
HPDJA0402E Invalid argument: The account
expiration date argument is outside of
the allowed range.
Explanation: The account expiration date is enforced
by the API logic. The maximum value is consistent
with existing Tivoli Access Manager installations that
impose this limitation.
Action: Ensure that the account expiration date
argument falls within the acceptable range, current time
- 2035-12-31-23:59:59.
Severity: Error
Component: bja / bja_s_policy
HPDJA0406E Invalid argument: The minimum
nonalphabetic characters argument is
outside of the allowed range.
Explanation: The minimum nonalphabetic characters
value is enforced to be a nonnegative integer.
Name: bja_invalid_acctexpdate
Action: Ensure that the minimum nonalphabetic
characters argument is greater than or equal to 0.
Number: 0x307a8192 (813334930)
Name: bja_invalid_minpwdnonalphas
Severity: Error
Number: 0x307a8196 (813334934)
Component: bja / bja_s_policy
Severity: Error
Component: bja / bja_s_policy
HPDJA0403E Invalid argument: The maximum
password age argument is outside of the
allowed range.
Explanation: The maximum password age must be a
nonnegative integer.
Chapter 1. Tivoli Access Manager Base Messages
165
HPDJA0407E Invalid argument: The minimum
password length argument is outside of
the allowed range.
Explanation: The minimum password length value is
enforced to be a nonnegative integer.
Action: Ensure that the minimum password length
argument is greater than 0.
Name: bja_invalid_minpwdlen
Number: 0x307a8197 (813334935)
Severity: Error
Component: bja / bja_s_policy
HPDJA0408E Invalid argument: The time-of-day
access days specification argument does
not correspond to any predefined value.
Explanation: The bitmaps defined in the PDPolicy
class represent the days of the week positionally within
an 8-bit structure.
Action: Ensure that the access days are specified using
the predefined bitmaps. These bitmaps can be used
individually. A logical OR operation can be performed
on two or more of the bitmaps to generate the desired
bitmap.
Name: bja_invalid_todaccess_days
Number: 0x307a8198 (813334936)
Severity: Error
Component: bja / bja_s_policy
HPDJA0409E Invalid argument: The time-of-day start
time is either less than 0 or greater than
the end time.
Explanation: The time-of-day start time must fall
within 0 through end time.
Action: Ensure that the time-of-day start time falls
within the acceptable range, 0 through end time.
Name: bja_invalid_todaccess_start
Number: 0x307a819a (813334938)
Severity: Error
Component: bja / bja_s_policy
HPDJA0411E Invalid argument: The time-of-day time
zone is not UTC or local.
Explanation: Only two time zone values are
supported: UTC or local. These values are represented
by constants in the PDPolicy class.
Action: Ensure that the time zone is one of the
predefined constants, PDPOLICY_TIME_UTC or
PDPOLICY_TIME_LOCAL, found in the PDPolicy
class.
Name: bja_invalid_todaccess_tz
Number: 0x307a819b (813334939)
Severity: Error
Component: bja / bja_s_policy
HPDJA0412E Invalid argument: The maximum
number of concurrent web sessions is
outside of the allowed range.
Explanation: The maximum number of concurrent
web sessions is enforced to be a nonnegative integer
and greater than zero.
Action: When specifying a number for the maximum
number of concurrent web sessions, ensure that it is an
integer greater than 0.
Name: bja_invalid_maxconcurrentwebsessions_
Number: 0x307a819c (813334940)
Severity: Error
Component: bja / bja_s_policy
HPDJA0500E Invalid argument: Null or zero-length
ACL name.
Explanation: An ACL name is required.
Number: 0x307a8199 (813334937)
Action: Ensure that the ACL name argument is
nonnull.
Severity: Error
Name: bja_invalid_aclname
Component: bja / bja_s_policy
Number: 0x307a81f4 (813335028)
Severity: Error
HPDJA0410E Invalid argument: The time-of-day end
time is either less than 1 or greater than
the maximum allowable time.
Component: bja / bja_s_acl
Explanation: The maximum value is the number of
seconds in 24 hours, less 1 minute.
HPDJA0502E Invalid argument: Null
PDAclEntryUser object.
Action: Ensure that the time-of-day end time falls
within the acceptable range, 1 through 1439.
Explanation: A nonnull PDAclEntryUser argument is
required.
Name: bja_invalid_todaccess_end
166
Error Message Reference
Action: Ensure that the PDAclEntryUser argument is
nonnull.
Name: bja_invalid_aclentryuser
Number: 0x307a81f6 (813335030)
Name: bja_invalid_aclentryusername
Number: 0x307a81fa (813335034)
Severity: Error
Component: bja / bja_s_acl
Severity: Error
Component: bja / bja_s_acl
HPDJA0507E Invalid argument: Null or zero-length
group name field for the ACL entry.
HPDJA0503E Invalid argument: Null
PDAclEntryGroup object.
Explanation: A group name is required to create an
ACL entry.
Explanation: A nonnull PDAclEntryGroup argument
is required.
Action: Ensure that the group name for the ACL entry
is nonnull.
Action: Ensure that the PDAclEntryGroup argument is
nonnull.
Name: bja_invalid_aclentrygroupname
Name: bja_invalid_aclentrygroup
Number: 0x307a81f7 (813335031)
Number: 0x307a81fb (813335035)
Severity: Error
Component: bja / bja_s_acl
Severity: Error
Component: bja / bja_s_acl
HPDJA0508E Invalid argument: Null permissions
field for the ACL entry.
HPDJA0504E Invalid argument: Null
PDAclEntryAnyOther object.
Explanation: A nonnull permissions field is required
to create an ACL entry.
Explanation: A nonnull PDAclEntryAnyOther
argument is required.
Action: Ensure that the permissions field for the ACL
entry is nonnull.
Action: Ensure that the PDAclEntryAnyOther
argument is nonnull.
Name: bja_invalid_aclentrypermissions
Name: bja_invalid_aclentryanyother
Number: 0x307a81f8 (813335032)
Number: 0x307a81fc (813335036)
Severity: Error
Component: bja / bja_s_acl
Severity: Error
Component: bja / bja_s_acl
HPDJA0505E Invalid argument: Null
PDAclEntryUnAuth object.
Explanation: A nonnull PDAclEntryUnAuth argument
is required.
Action: Ensure that the PDAclEntryUnAuth argument
is nonnull.
Name: bja_invalid_aclentryunauth
Number: 0x307a81f9 (813335033)
Severity: Error
Component: bja / bja_s_acl
HPDJA0506E Invalid argument: Null or zero-length
user name field for the ACL entry.
Explanation: A user name is required to create an
ACL entry.
Action: Ensure that the user name for the ACL entry
is nonnull.
HPDJA0509E An ACL entry present in the
UserAclEntries HashMap is not a
PDAclEntryUser object.
Explanation: Only PDAclEntryUser objects can be
present in the UserAclEntries HashMap. Use the
GroupAclEntries HashMap for passing in the
PDAclEntryGroup objects.
Action: Ensure that the UserAclEntries HashMap
contains only PDAclEntryUser objects.
Name: bja_not_aclentryuser
Number: 0x307a81fd (813335037)
Severity: Error
Component: bja / bja_s_acl
HPDJA0510E An ACL entry present in the
GroupAclEntries HashMap is not a
PDAclEntryGroup object.
Explanation: Only PDAclEntryGroup objects can be
present in the GroupAclEntries HashMap. Use the
Chapter 1. Tivoli Access Manager Base Messages
167
UserAclEntries HashMap for passing in the
PDAclEntryUser objects.
Action: Ensure that the GroupAclEntries HashMap
contains only PDAclEntryGroup objects.
Name: bja_not_aclentrygroup
Number: 0x307a82bc (813335228)
Severity: Error
Component: bja / bja_s_protobjspace
Number: 0x307a81fe (813335038)
HPDJA0800E Invalid argument: Null or zero-length
application server name.
Severity: Error
Explanation: A valid, nonnull name is required.
Component: bja / bja_s_acl
Action: Ensure that the application server name
argument is nonnull and has a positive length.
HPDJA0600E Invalid argument: Null or zero-length
protected object name.
Name: bja_invalid_appsvrname
Explanation: A nonnull protected object name is
required.
Action: Ensure that the protected object name
argument is nonnull.
Name: bja_invalid_protobjectname
Number: 0x307a8258 (813335128)
Severity: Error
Component: bja / bja_s_protobj
Number: 0x307a8320 (813335328)
Severity: Error
Component: bja / bja_s_appsvrcfg
HPDJA0801E Invalid argument: Null group list.
Explanation: A valid, nonnull group list is required.
Action: Ensure that the application server group list
argument is nonnull. An empty list may be used to
clear an existing group list.
Name: bja_invalid_appsvrgroups
HPDJA0601E Invalid argument: Null or zero-length
permission string
Explanation: A nonnull permission string is required.
Action: Ensure that the permission string is nonnull.
Name: bja_invalid_permstr
Number: 0x307a8259 (813335129)
Severity: Error
Component: bja / bja_s_protobj
HPDJA0602E Invalid argument: Length of input
arrays do not match.
Number: 0x307a8321 (813335329)
Severity: Error
Component: bja / bja_s_appsvrcfg
HPDJA0802E Invalid argument: Null URL or invalid
protocol.
Explanation: A valid, nonnull URL is required. In
addition, only the ’file’ protocol is currently supported.
Action: Ensure that the URL argument is nonnull and
that the URL uses the ’file’ protocol.
Name: bja_invalid_appsvrcfg_url
Explanation: Matching Input array lengths required.
Number: 0x307a8322 (813335330)
Action: Ensure that the size of all input arrays match.
Severity: Error
Name: bja_invalid_inputs
Component: bja / bja_s_appsvrcfg
Number: 0x307a825a (813335130)
Severity: Error
Component: bja / bja_s_protobj
HPDJA0700E Invalid argument: Null or zero-length
protected objectspace name.
Explanation: A nonnull protected objectspace name is
required.
Action: Ensure the protected objectspace name
argument is nonnull.
Name: bja_invalid_protobjectspacename
168
Error Message Reference
HPDJA0803E Database URL does not specify a
directory.
Explanation: The operation requires an existing
directory in which to locate the local policy database.
Action: Ensure that the database URL argument
specifies an existing directory on the local system.
Name: bja_invalid_appsvrcfg_dburl
Number: 0x307a8323 (813335331)
Severity: Error
Component: bja / bja_s_appsvrcfg
HPDJA0804E Invalid argument: Null or empty Tivoli
Access Manager server list.
Explanation: Configuration and use of Java
application servers require communication with the
Tivoli Access Manager policy server and an
authorization server.
Action: Ensure that there is at least one server in the
server list argument.
Name: bja_invalid_pdsvr_list
Number: 0x307a8324 (813335332)
Severity: Error
Component: bja / bja_s_appsvrcfg
HPDJA0805E Invalid argument: Preference rank
must be greater than 0.
Explanation: Internal logic requires that all Tivoli
Access Manager servers specified in an application
configuration have a rank greater than 0.
Action: Ensure that the rank argument is greater than
0.
Name: bja_invalid_pdsvr_rank
Number: 0x307a8325 (813335333)
Severity: Error
Component: bja / bja_s_appsvrcfg
Component: bja / bja_s_appsvrcfg
HPDJA0808E The specified configuration or keystore
file already exists.
Explanation: The ’create’ configuration action is
designed to check for existing files and fail if they are
found in order not to overwrite them accidentally.
Action: To preserve existing files, specify new
configuration and keystore file names. To overwrite
existing files, specify the ’replace’ configuration action.
Name: bja_appsvrcfg_file_exists
Number: 0x307a8328 (813335336)
Severity: Error
Component: bja / bja_s_appsvrcfg
HPDJA0809E Cannot create the specified
configuration or keystore file.
Explanation: Failure to create the configuration or
keystore file might be caused by a variety of reasons
such as access restrictions or limited resources (file
descriptors or disk space).
Action: Try another file name or another directory.
Ensure that the process has permission to create and
write to the file.
Name: bja_appsvrcfg_file_create_err
Number: 0x307a8329 (813335337)
HPDJA0806E Invalid argument: Unsupported
configuration action.
Explanation: The configureAppSvr() method verifies
that a known action is specified and executes different
logic based on that action.
Action: Ensure that one of the configuration action
constants defined in the PDAppSvrConfig class is used.
Name: bja_invalid_appsvrcfg_action
Number: 0x307a8326 (813335334)
Severity: Error
Component: bja / bja_s_appsvrcfg
HPDJA0807E Invalid argument: Null application
server specification.
Explanation: The nonnull application server
specification is required.
Action: Ensure that the application server specification
argument is nonnull.
Severity: Error
Component: bja / bja_s_appsvrcfg
HPDJA0810E The signature needed to sign a
certificate request is not supported.
Explanation: Only RSA is used to create application
server certificate requests. If the Tivoli Access Manager
policy server’s certificate has not been signed using
RSA, then information required to complete the
application server certificate request is not available.
Action: Ensure that the keystore used by the Tivoli
Access Manager policy server has not been corrupted
and that the signature algorithm for the server
certificate is RSA. Other signature algorithms, such as
DSA, are not supported.
Name: bja_unsupported_sig
Number: 0x307a832a (813335338)
Severity: Error
Component: bja / bja_s_appsvrcfg
Name: bja_invalid_appsvrcfg_spec
Number: 0x307a8327 (813335335)
Severity: Error
Chapter 1. Tivoli Access Manager Base Messages
169
HPDJA0811W Some aspect of local unconfiguration
failed.
Explanation: When unconfiguring a Java application
server, a number of operations are performed locally.
These steps include removing configuration data from
the configuration URL and deleting the keystore file.
One or more of these steps failed, so the files must be
manually cleaned up.
Action: Manually remove the configuration or
keystore file, or both, if desired. Alternatively,
information in the files can be overwritten by
configuring another Java application server using the
’replace’ action.
Number: 0x307a832e (813335342)
Severity: Error
Component: bja / bja_s_appsvrcfg
HPDJA0815E The specified server does not exist in
the configuration.
Explanation: A server of the specified type with the
given host and port cannot be found the configuration.
Action: Check that the input server has been specified
properly. Ensure that the host, port, and server type are
correct. The configuration information can be examined
using the getAppSvrInfo() method.
Name: bja_appsvrcfg_local_uncfg_failed
Name: bja_pdsvr_doesnt_exist
Number: 0x307a832b (813335339)
Number: 0x307a832f (813335343)
Severity: Warning
Severity: Error
Component: bja / bja_s_appsvrcfg
Component: bja / bja_s_appsvrcfg
HPDJA0812E Invalid argument: Unrecognized server
type.
HPDJA0816E Cannot remove last server.
Explanation: A recognized server type is required.
Action: Ensure the server type argument is one of the
server type constants defined in the PDAppSvrConfig
class.
Explanation: At least one policy server and one
authorization server must be specified in a Java
application server configuration. The last policy server
and authorization server cannot be removed.
Name: bja_invalid_pdsvr_type
Action: Add another server of the specified type
before trying to remove this one.
Number: 0x307a832c (813335340)
Name: bja_cant_remove_last_pdsvr
Severity: Error
Number: 0x307a8330 (813335344)
Component: bja / bja_s_appsvrcfg
Severity: Error
Component: bja / bja_s_appsvrcfg
HPDJA0813E Invalid argument: Null server object.
Explanation: A nonnull server object is required.
Action: Ensure the server argument is nonnull.
Name: bja_invalid_pdsvr
Number: 0x307a832d (813335341)
Severity: Error
Component: bja / bja_s_appsvrcfg
HPDJA0814E The specified server already exists in
the configuration.
Explanation: A server cannot be added to the
configuration if it already exists.
Action: Check that the input server has been specified
properly. Ensure that the host, port and server type are
correct. The configuration information can be examined
using the getAppSvrInfo() method for further
information.
Name: bja_pdsvr_already_exists
170
Error Message Reference
HPDJA0817E The specified server is ambiguous. It
matches more than one server in the
configuration.
Explanation: When searching for a match to the input
server, first both host and port are examined. If a server
in the configuration matches both host and port, the
search is done. If no server in the configuration
matches both host and port, a match is made on host
alone. If more than one server matches on host, the
results are ambiguous.
Action: Change the port specification of the server so
that the combination of host and port matches one and
only one server of its type in the configuration. The
configuration information can be examined using the
getAppSvrInfo() method.
Name: bja_ambiguous_pdsvr
Number: 0x307a8331 (813335345)
Severity: Error
Component: bja / bja_s_appsvrcfg
HPDJA0818E Cannot set value for remote mode
application server.
Name: bja_appsvrcfg_local_uncfg_failed2
Number: 0x307a8334 (813335348)
Explanation: The configuration data that is being set
is used only by local mode Java application servers,
and the specified configuration URL indicates a remote
mode server.
Severity: Warning
Action: Verify that the application server was
configured correctly. If it is supposed to operate in local
mode, the server must be unconfigured and configured
again. If it is not supposed to operate in local mode,
the attempted operation is not applicable and no
further action is necessary.
HPDJA0821E Cannot create temporary configuration
file.
Name: bja_local_only_operation
Action: Try another file name or another directory.
Ensure that the process has permission to create and
write to the file.
Number: 0x307a8332 (813335346)
Severity: Error
Component: bja / bja_s_appsvrcfg
HPDJA0819W Failure restoring original
configuration or keystore information.
Explanation: The configuration operation failed but
the original contents of the configuration or keystore
file, or both, could not be restored, possibly due to a
system-dependent file I/O error. The information
contained in the files is lost, but this is significant only
if there was application-specific data in the
configuration file. If that was the case, the only
recovery is to reconfigure the application server and
supply any extra information to the new configuration.
Component: bja / bja_s_appsvrcfg
Explanation: Failure to create the configuration file
might be caused by a variety of reasons such as access
restrictions or limited resources (file descriptors or disk
space).
Name: bja_appsvrcfg_unconfig_file_ create_err
Number: 0x307a8335 (813335349)
Severity: Error
Component: bja / bja_s_appsvrcfg
HPDJA0822E Cannot store information in temporary
configuration file.
Explanation: Failure to create the configuration file
might be caused by a variety of reasons such as access
restrictions or limited resources (file descriptors or disk
space).
Action: The Java application server should be
unconfigured and then reconfigured.
Action: Try another file name or another directory.
Ensure that the process has permission to create and
write to the file.
Name: bja_file_restore_failed
Name: bja_appsvrcfg_unconfig_file_ store_err
Number: 0x307a8333 (813335347)
Number: 0x307a8336 (813335350)
Severity: Warning
Severity: Error
Component: bja / bja_s_appsvrcfg
Component: bja / bja_s_appsvrcfg
HPDJA0820W Local unconfiguration ignored;
specified application server name or
host does not match data in
configuration file.
HPDJA0900E Invalid argument: Null or zero-length
SSO resource name.
Explanation: Before performing local unconfiguration
operations, a check is made to verify that the user
specified the same server and host data that is present
in the configuration file. This check prevents a user
from inadvertently removing local configuration for the
wrong application server. Since this check is made after
calling the policy server to unconfigure the application
server, it has no effect on remote unconfiguration
operations.
Action: Ensure the SSO resource name argument is
nonnull and has a positive length.
Explanation: A valid, nonnull SSO resource name is
required.
Name: bja_invalid_resourcename
Number: 0x307a8384 (813335428)
Severity: Error
Component: bja / bja_s_ssoresource
Action: Ensure that the application server name and
host specified to the unconfiguration operation matches
the application server name and host present in the
configuration file.
Chapter 1. Tivoli Access Manager Base Messages
171
HPDJA1000E Invalid argument: Null or zero-length
SSO resource group name.
HPDJA1200E Invalid argument: Null or zero-length
action name.
Explanation: A valid, nonnull SSO resource group
name is required.
Explanation: A valid, nonnull action name is required.
Action: Ensure the SSO resource group name
argument is nonnull and has a positive length.
Name: bja_invalid_resourcegroupname
Number: 0x307a83e8 (813335528)
Severity: Error
Action: Ensure that the action name argument is
nonnull and has a positive length.
Name: bja_invalid_actionname
Number: 0x307a84b0 (813335728)
Severity: Error
Component: bja / bja_s_action
Component: bja / bja_s_ssoresourcegroup
HPDJA1201E Invalid argument: Null action type.
HPDJA1100E Invalid argument: SSO resource type.
Explanation: The SSO resource type must be either
PDSSOCRED_SSORESOURCE or
PDSSOCRED_SSORESOURCEGROUP, defined in the
PDSSOCred class.
Action: Ensure the SSO resource type is one of the
supported types.
Name: bja_invalid_ssotype
Explanation: A valid, nonnull action type is required.
Action: Ensure that the action type argument is
nonnull.
Name: bja_invalid_actiontype
Number: 0x307a84b1 (813335729)
Severity: Error
Component: bja / bja_s_action
Number: 0x307a844c (813335628)
Severity: Error
Component: bja / bja_s_ssocred
HPDJA1101E Invalid argument: SSO resource user
name.
Explanation: A nonnull SSO resource user name is
required.
Action: Ensure the SSO resource user name argument
is nonnull.
Name: bja_invalid_ssoresourceusername
HPDJA1202E Invalid argument: Null or zero-length
action group name.
Explanation: A valid, nonnull action group name is
required.
Action: Ensure that the action group name argument
is nonnull and has a positive length.
Name: bja_invalid_actiongroupname
Number: 0x307a84b2 (813335730)
Severity: Error
Component: bja / bja_s_action
Number: 0x307a844d (813335629)
Severity: Error
Component: bja / bja_s_ssocred
HPDJA1300E Invalid argument: Null or zero-length
server name.
Explanation: A valid, nonnull server name is required.
HPDJA1102E Invalid argument: SSO resource
password.
Action: Ensure that the server name argument is
nonnull and has a positive length.
Explanation: A nonnull SSO resource password is
required.
Name: bja_invalid_servername
Action: Ensure the SSO resource password argument
is nonnull.
Severity: Error
Name: bja_invalid_ssoresourcepassword
Component: bja / bja_s_server
Number: 0x307a844e (813335630)
Severity: Error
Component: bja / bja_s_ssocred
172
Error Message Reference
Number: 0x307a8514 (813335828)
HPDJA1301E Invalid argument: Null task name.
Explanation: A valid, nonnull task name is required.
Action: Ensure that the task name argument is
nonnull and has a positive length.
Name: bja_invalid_taskname
Name: bja_invalid_todaccessinfo
Number: 0x307a8515 (813335829)
Number: 0x307a857b (813335931)
Severity: Error
Severity: Error
Component: bja / bja_s_server
Component: bja / bja_s_pop
HPDJA1400E Invalid argument: Null or zero-length
POP name.
HPDJA1404E Invalid argument: Null or empty
IPAuthInfo argument.
Explanation: A valid, nonnull POP name is required.
Explanation: A nonnull and nonempty IPAuthInfo
argument is required.
Action: Ensure that the POP name argument is
nonnull and has a positive length.
Number: 0x307a8578 (813335928)
Action: Ensure that the IPAuthInfo argument is
nonnull and nonempty. Use the PDPop.IPAuthInfo
constructor to create IPAuthInfo objects and pass them
as elements of the IPAuthInfo ArrayList argument.
Severity: Error
Name: bja_invalid_ipauthinfo
Component: bja / bja_s_pop
Number: 0x307a857c (813335932)
Name: bja_invalid_popname
Severity: Error
HPDJA1401E Invalid argument: Null or invalid QOP
value.
Explanation: A valid, nonnull QOP value is required.
Action: Ensure that the QOP argument is nonnull and
is one of the PDPOP_QOP_* constants defined in the
PDPop class.
Name: bja_invalid_qop
Number: 0x307a8579 (813335929)
Severity: Error
Component: bja / bja_s_pop
Component: bja / bja_s_pop
HPDJA1405W IPAuthInfo specified at index %s
already exists for this POP.
Explanation: New IPAuthInfo cannot be specified if
IPAuthInfo already exists for a given IP address and
netmask.
Action: Ensure that the existing IPAuthInfo for the
specified IP address and netmask is removed before
specifying a new one for the same IP address and
netmask.
Name: bja_ipauthinfo_already_exists
HPDJA1402E Invalid argument: Invalid audit level
value.
Explanation: A valid, nonnull value for the audit level
is required.
Action: Ensure that the audit level argument is set to
one of the PDPOP_AUDIT_LEVEL_* constants defined
in the PDPop class or a logical OR operation on these
constants.
Name: bja_invalid_auditlevel
Number: 0x307a857a (813335930)
Severity: Error
Component: bja / bja_s_pop
Number: 0x307a857d (813335933)
Severity: Warning
Component: bja / bja_s_pop
HPDJA1406W IPAuthInfo specified at index %s not
found for this POP.
Explanation: Only IPAuthInfo entries that exist can be
removed.
Action: Ensure that the IPAuthInfo entry exists. If the
entry does not exist, remove it from the input list.
Name: bja_ipauthinfo_not_found
Number: 0x307a857e (813335934)
HPDJA1403E Invalid argument: Null todAccessInfo
argument.
Severity: Warning
Component: bja / bja_s_pop
Explanation: A nonnull todAccessInfo argument is
required.
Action: Ensure that the todAccessInfo argument is
nonnull. Use the PDTodAccessInfo constructor to create
a valid PDTodAccessInfo object.
Chapter 1. Tivoli Access Manager Base Messages
173
HPDJA1407E Specified IP address is not valid.
Explanation: A valid IP address is required.
Action: Ensure that the IP address is specified in
dotted decimal format with valid numeric characters.
Name: bja_invalid_ruletext
Number: 0x307a8641 (813336129)
Severity: Error
Component: bja / bja_s_authzrule
Name: bja_invalid_ipaddr
Number: 0x307a857f (813335935)
Severity: Error
Component: bja / bja_s_pop
HPDJA1408E Specified netmask is not valid.
Explanation: A valid netmask is required.
Action: Ensure that the netmask is specified in dotted
decimal format with valid numeric characters.
HPDJA1602E Invalid argument: Null fail reason.
Explanation: A nonnull fail reason is required.
Action: Ensure that the fail reason argument is
nonnull.
Name: bja_invalid_failreason
Number: 0x307a8642 (813336130)
Severity: Error
Component: bja / bja_s_authzrule
Name: bja_invalid_netmask
Number: 0x307a8580 (813335936)
Severity: Error
HPDJA1700E Command does not pass validation
check.
Component: bja / bja_s_pop
Explanation: The command syntax was incorrect. This
can occur when an argument of the wrong type is
specified.
HPDJA1500E Invalid argument: Null or zero-length
domain name.
Action: Verify the correct syntax for the command and
try again.
Explanation: A valid, nonnull domain name is
required.
Name: bja_invalid_command
Action: Ensure that the domain name argument is
nonnull and has a positive length.
Name: bja_invalid_domainname
Number: 0x307a85dc (813336028)
Severity: Error
Component: bja / bja_s_domain
HPDJA1600E Invalid argument: Null or zero-length
rule name.
Explanation: A valid, nonnull rule name is required.
Action: Ensure that the rule name argument is
nonnull and has a positive length.
Name: bja_invalid_rulename
Number: 0x307a8640 (813336128)
Severity: Error
Number: 0x307a86a4 (813336228)
Severity: Error
Component: bja / bja_s_jcli
HPDJA1708E The server did not start.
Explanation: A problem occurred when the command
line program tried to start the server.
Action: Try to start the server independently of the
command line administration tool; it might start
successfully under those circumstances. If the server
fails to start, any errors that are written to the terminal
or to the server’s trace logs can be used to help
determine the problem.
Name: bja_svr_start_fail
Number: 0x307a86ac (813336236)
Severity: Error
Component: bja / bja_s_jcli
Component: bja / bja_s_authzrule
HPDJA1601E Invalid argument: Null or zero-length
rule text.
HPDJA1710E The server did not stop. Check the host
and port number.
Explanation: A valid, nonnull rule text is required.
Explanation: A problem occurred when the command
line program tried to stop the server.
Action: Ensure that the rule text argument is nonnull
and has a positive length.
Action: Ensure that the host and port specify a valid
audit server. If the host and port specify a different
174
Error Message Reference
type of server, the stop command will not work. If the
host and port do specify a valid audit server, try to
stop the server independently of the command line
administration tool; it might stop successfully using
that method. If the server fails to stop, any errors that
are written to the terminal or to the server’s trace logs
can be used to help determine the problem.
HPDMG0155E Too many subjects found within the
client credential.
Explanation: The Tivoli Access Manager policy server
encountered a client credential that contained more
than one subject.
Name: bja_svr_stop_fail
Action: Ensure that the request or operation deals
with a single identity.
Number: 0x307a86ae (813336238)
Name: ivmgrd_s_too_many_subjects
Severity: Error
Number: 0x14c0109b (348131483)
Component: bja / bja_s_jcli
Severity: Error
Component: mgr / ivmgrd_s_general
HPDJA1711E Invalid argument: Port number must
be greater than 0.
Explanation: A valid, positive port number is required
in order to try to connect to the server.
Action: Ensure that the specified port number is
greater than 0.
HPDMG0156E Unable to sign a certificate.
Unexpected error from %s (0x%8.8lx).
Explanation: An unexpected error was encountered
while attempting to issue a certificate.
Name: bja_invalid_svr_port
Action: Ensure that the keystore used by the Tivoli
Access Manager policy server has not been corrupted.
Number: 0x307a86af (813336239)
Name: ivmgrd_s_cert_unexpected
Severity: Error
Number: 0x14c0109c (348131484)
Component: bja / bja_s_jcli
Severity: Fatal
Component: mgr / ivmgrd_s_general
HPDJA1712E Could not detect a server running on
host %s, port %s.
Explanation: The command line program cannot stop
a server if it cannot connect to it using the specified
host and port.
Action: Ensure that the specified host and port
number are correct. Also, test connectivity from the
system on which the command line program is running
to the target system.
Name: bja_no_svr_running
Number: 0x307a86b0 (813336240)
Severity: Error
Component: bja / bja_s_jcli
HPDMG0150E Invalid object name.
HPDMG0157E The policy server failed to sign a
certificate.
Explanation: The Tivoli Access Manager policy server
encountered an unexpected error while attempting to
sign a certificate.
Action: Ensure that there is enough disk space on the
policy server machine. See ivmgrd.log for more
information.
Name: ivmgrd_s_cert_signfail
Number: 0x14c0109d (348131485)
Severity: Fatal
Component: mgr / ivmgrd_s_general
Explanation: The Tivoli Access Manager policy server
received a request containing an invalid object name.
HPDMG0158E Could not open %s because the
password stash file does not exist or is
corrupted.
Action: Ensure that the object has been specified
properly.
Explanation: The server’s configuration has possibly
been corrupted.
Name: ivmgrd_s_invalid_object_name
Action: Ensure that the keystore has not been
corrupted. If the failure persists, reconfigure the failed
server.
Number: 0x14c01096 (348131478)
Severity: Error
Component: mgr / ivmgrd_s_general
Name: ivmgrd_s_kdb_nopassword
Number: 0x14c0109e (348131486)
Chapter 1. Tivoli Access Manager Base Messages
175
Severity: Fatal
Component: mgr / ivmgrd_s_general
HPDMG0160E SSL database (ivmgrd.kdb) could not
be opened.
HPDMG0165W The application has received a
database update notification however
the version of the command is incorrect.
The policy database will not be
updated.
Explanation: The Tivoli Access Manager policy server
keystore file, ivmgrd.kdb, could not be opened.
Explanation: The policy server has sent a database
update notification however the policy server is
unaware that this system has been upgraded.
Action: Ensure that the keystore used by the Tivoli
Access Manager policy server exists and has not been
corrupted. Should the failure persist, stop the policy
server, and run mgrsslcfg to re-configure the policy
server.
Action: This is typically a self-correcting problem and
no action is normally required. If the problem persists
beyond a restart of the application, check the
application logs and policy server logs for additional
information.
Name: ivmgrd_s_kdb_nokdb
Name: ivmgrd_s_wrong_notify_ver
Number: 0x14c010a0 (348131488)
Number: 0x14c010a5 (348131493)
Severity: Fatal
Severity: Warning
Component: mgr / ivmgrd_s_general
Component: mgr / ivmgrd_s_general
HPDMG0162E ASN1 decode error %d occurred. The
certificate buffer received is invalid and
cannot be decoded.
HPDMG0166W Memory allocation failure.
Attempted to allocate %d bytes of
memory.
Explanation: The Tivoli Access Manager policy server
has received a corrupted or invalid request.
Explanation: The Tivoli Access Manager policy server
attempted to allocate memory, and an error occurred.
Action: Retry the operation. If the problems persists,
unconfigure and reconfigure the client application or
remote server.
Name: ivmgrd_s_asn_decode
Action: This error might be a temporary condition.
Attempt to free up memory by closing other running
applications. If the problem persists, increase the
system memory in the machine.
Number: 0x14c010a2 (348131490)
Name: ivmgrd_s_no_memory
Severity: Fatal
Number: 0x14c010a6 (348131494)
Component: mgr / ivmgrd_s_general
Severity: Warning
Component: mgr / ivmgrd_s_general
HPDMG0164E The Policy Server could not be
started (0x%8.8lx).
Explanation: The Tivoli Access Manager policy server
encountered an error during initialization. Probably the
password or login DN is incorrect or the password has
expired. This error should not occur if the program is
correctly configured, but if [ldap] admin-dn or
admin-pwd values in .conf files have been modified
then it is possible.
HPDMG0167E Domain in the certificate to be signed
does not match the local domain.
Explanation: PDMgr received a certificate to be signed
but the domain in the certificate distinguished name is
different from the local domain contained in the
authenticated credentials for the session.
Action: Log in to the correct domain for the certificate.
Action: Check ivmgrd.log for additional information.
Name: ivmgrd_s_cert_domain_mismatch
Name: ivmgrd_s_could_not_start
Number: 0x14c010a7 (348131495)
Number: 0x14c010a4 (348131492)
Severity: Fatal
Severity: Fatal
Component: mgr / ivmgrd_s_general
Component: mgr / ivmgrd_s_general
HPDMG0168I Migrating database
Explanation: The Tivoli Access Manager policy server
has opened a down-level version of the policy database
and is migrating it to the current level.
176
Error Message Reference
Action: No action is required.
Name: ivmgrd_s_database_migrate
HPDMG0301E No command handler is installed for
the command.
Component: mgr / ivmgrd_s_general
Explanation: The Tivoli Access Manager policy server
received an unsupported request. This can occur when
Access Manager is running in an unsupported
configuration.
HPDMG0169E Database migration failed!
Action: Ensure that the client application version is
supported by Tivoli Access Manager.
Number: 0x14c010a8 (348131496)
Severity: Notice
Explanation: The Tivoli Access Manager policy server
has opened a down-level version of the policy
database, and encountered an error in the process of
migrating the database to the current level.
Name: ivmgrd_s_no_cmd_handler
Action: Ensure that system resources are available and
retry. If the problem persists, contact your IBM
representative.
Component: mgr / ivmgrd_s_stream
Name: ivmgrd_s_database_migrate_failed
Number: 0x14c010a9 (348131497)
Severity: Fatal
Number: 0x14c0112d (348131629)
Severity: Error
HPDMG0451E Invalid server name.
Explanation: The Tivoli Access Manager policy server
has received a server request containing an invalid
server name. This error is likely due to a syntax error
in the name.
Component: mgr / ivmgrd_s_general
Action: Ensure that the server name argument is
nonnull.
HPDMG0170E The policy server is unable to sign
certificates. The policy server’s CA
certificate has expired.
Name: ivmgrd_s_invalid_server_name
Explanation: The policy server’s CA certificate lifetime
of 20 years has expired.
Severity: Error
Action: Unconfigure and re-configure the policy
server, then unconfigure and re-configure all clients and
applications in the secure domain.
Name: ivmgrd_s_cacert_expired
Number: 0x14c010aa (348131498)
Severity: Fatal
Component: mgr / ivmgrd_s_general
Number: 0x14c011c3 (348131779)
Component: mgr / ivmgrd_s_svrmgmt
HPDMG0452E Server not found.
Explanation: The Tivoli Access Manager policy server
has received a server request containing a server name
that cannot be found in the policy database.
Action: Ensure that the server name appears in the list
of configured servers.
Name: ivmgrd_s_server_not_found
HPDMG0171I The configured certificate life of %d
days exceeds the policy server’s CA
certificate life. A value of %d will be
used to sign this certificate.
Explanation: The policy server’s CA certificate lifetime
of 20 years has expired.
Action: Unconfigure and re-configure the policy
server, then unconfigure and re-configure all clients and
applications in the secure domain.
Name: ivmgrd_s_certlife_toobig
Number: 0x14c010ab (348131499)
Severity: Notice
Component: mgr / ivmgrd_s_general
Number: 0x14c011c4 (348131780)
Severity: Error
Component: mgr / ivmgrd_s_svrmgmt
HPDMG0453E A server with the same name already
exists.
Explanation: The Tivoli Access Manager policy server
has received a configure server request containing a
server name of an already configured server.
Action: Ensure that the server name is not in the list
of configured servers.
Name: ivmgrd_s_server_already_exists
Number: 0x14c011c5 (348131781)
Severity: Error
Chapter 1. Tivoli Access Manager Base Messages
177
Component: mgr / ivmgrd_s_svrmgmt
HPDMG0455W The API function is not supported
by this registry type.
Explanation: An attempt was made to use a registry
API function that is not supported by the installed
registry type.
Action: Contact your IBM service representative.
Name: ivmgrd_s_not_supported
Number: 0x14c011c7 (348131783)
Severity: Warning
Component: mgr / ivmgrd_s_svrmgmt
HPDMG0462E The AZN application returned an
error.
Explanation: The admin service plugin has returned
an error.
Action: Refer to the admin service plugin
documentation.
applications at various times. This information is used
to facilitate management of the protected object space.
An error has occurred while attempting to retrieve this
information.
Action: The application might not be configured
correctly. Check the returned error code, make any
necessary corrections, and retry the operation.
Name: ivmgrd_s_server_list_objects
Number: 0x14c011d0 (348131792)
Severity: Error
Component: mgr / ivmgrd_s_svrmgmt
HPDMG0465E An administration task was
forwarded to the %s application. The
application returned the following error:
(0x%8.8lx).
Explanation: The Tivoli Access Manager policy server
attempted to forward the requested administration task
to the application. The application returned an error
indicating the task could not be performed.
Number: 0x14c011ce (348131790)
Action: The application might not be configured
correctly. Check the returned error code, make any
necessary corrections, and retry the operation.
Severity: Error
Name: ivmgrd_s_server_perform_task
Component: mgr / ivmgrd_s_svrmgmt
Number: 0x14c011d1 (348131793)
Name: ivmgrd_s_server_admin_svc_error
Severity: Error
HPDMG0463E A protected object %s was requested
from the %s application. The
application returned the following error:
(0x%8.8lx).
Explanation: The Tivoli Access Manager policy server
will request protected object information from
applications at various times. This information is used
to facilitate management of the protected object space.
An error has occurred while attempting to retrieve this
information.
Action: The application might not be configured
correctly. Check the returned error code, make any
necessary corrections, and retry the operation.
Name: ivmgrd_s_server_get_object
Number: 0x14c011cf (348131791)
Severity: Error
Component: mgr / ivmgrd_s_svrmgmt
Component: mgr / ivmgrd_s_svrmgmt
HPDMG0466E A list of supported administration
tasks was forwarded to the %s
application. The application returned
the following error: (0x%8.8lx).
Explanation: The Tivoli Access Manager policy server
requested the list of supported administration tasks
from the application. The application returned an error
indicating that the list could not be provided.
Action: The application may not be configured
correctly. Check the returned error code, make any
necessary corrections, and retry the operation.
Name: ivmgrd_s_server_get_tasks
Number: 0x14c011d2 (348131794)
Severity: Error
Component: mgr / ivmgrd_s_svrmgmt
HPDMG0464E A list of child protected objects under
the parent protected object %s was
requested from the %s application. The
application returned the following error:
(0x%8.8lx).
HPDMG0467E A policy database update notification
was sent to the %s application. The
application returned the following error:
(0x%8.8lx).
Explanation: The Tivoli Access Manager policy server
will request protected object information from
Explanation: The Tivoli Access Manager policy server
sent a database update notification to the application.
178
Error Message Reference
This notification informs the application that a change
has been made to the policy database.
Action: The application may not be configured
correctly. Check the returned error code and make any
necessary corrections. You can force a database update
notification to be sent by using the ″server replicate″
administration command.
Name: ivmgrd_s_server_database_change
Number: 0x14c011d3 (348131795)
Severity: Error
Component: mgr / ivmgrd_s_svrmgmt
HPDMG0611E This operation is not supported for
the objects in this object space.
Explanation: A Tivoli Access Manager admin service
plugin has received a request that is not supported.
Action: Refer to the admin service plugin
documentation to determine the capabilities of the
plugin.
Name: ivmgrd_s_obj_operation_not_ supported2
Number: 0x14c01263 (348131939)
Severity: Error
Component: mgr / ivmgrd_s_objmgmt
HPDMG0600E Object not found.
Explanation: The Tivoli Access Manager policy server
received a request that referenced an object which was
not found in the policy database.
Action: Ensure that the requested object exists and is
referenced correctly.
Name: ivmgrd_s_object_not_found
Number: 0x14c01258 (348131928)
Severity: Error
Component: mgr / ivmgrd_s_objmgmt
HPDMG0612E The operation requested cannot be
performed on the root object.
Explanation: The Tivoli Access Manager policy server
received a request to create, delete, or modify the root
object. These operations are not permitted.
Action: No action is required.
Name: ivmgrd_s_obj_cant_perform_on_root
Number: 0x14c01264 (348131940)
Severity: Error
Component: mgr / ivmgrd_s_objmgmt
HPDMG0601E Object already exists.
Explanation: The Tivoli Access Manager policy server
received a create protected object request for an object
name that already exists in the policy database.
Action: Ensure that the requested protected object
name does not already exist.
Name: ivmgrd_s_object_already_exists
HPDMG0613E One or more of the child object
names was invalid.
Explanation: The Tivoli Access Manager policy server
received a request with a protected object as an
argument. The object string contained at least one child
object that was not present in the policy database.
Number: 0x14c01259 (348131929)
Action: Ensure that the protected object is specified
correctly.
Severity: Error
Name: ivmgrd_s_obj_invalid_child_name
Component: mgr / ivmgrd_s_objmgmt
Number: 0x14c01265 (348131941)
Severity: Error
HPDMG0609E The specified group container cannot
be used as it corresponds to an existing
group name.
Explanation: The Tivoli Access Manager policy server
received a request to create a group container
specifying a container name that already exists as a
group name.
Action: Ensure that the group name does not already
exist.
Name: ivmgrd_s_invalid_container_name
Number: 0x14c01261 (348131937)
Severity: Error
Component: mgr / ivmgrd_s_objmgmt
Component: mgr / ivmgrd_s_objmgmt
HPDMG0614W One or more ACL entries contain
both the Add (A) and Password (W)
capabilities. These capabilities
potentially create a security
vulnerability if they are granted to an
administrator of a group. The
administrator may then add any user to
the group and then change the user’s
password.
Explanation: With both capabilities, the administrator
of a group of users may add any user to the group and
then change the user’s password.
Chapter 1. Tivoli Access Manager Base Messages
179
Action: Only grant both of these capabilities to the
same administrator under special controlled
circumstances or to a highly trusted user.
HPDMG0619E The user is not authorized to view
attached ACL information.
Number: 0x14c01266 (348131942)
Explanation: Attached ACL information is available at
the specified protected object location, however, the
user is not authorized to view ACLs.
Severity: Warning
Action: No action is required.
Component: mgr / ivmgrd_s_objmgmt
Name: ivmgrd_s_attach_acl_unauthz
Name: ivmgrd_s_aw_together
Number: 0x14c0126b (348131947)
HPDMG0615W One or more ACL entries contain
both the Add (A) and Modify (m)
capabilities. These capabilities
potentially create a security
vulnerability if they are granted to an
administrator of a group. The
administrator may then add any user to
the group and then change the user’s
data.
Explanation: With both capabilities, the administrator
of a group of users may add any user to the group and
then change the user’s data.
Severity: Error
Component: mgr / ivmgrd_s_objmgmt
HPDMG0620E The user is not authorized to view
attached POP information.
Explanation: Attached POP information is available at
the specified protected object location, however, the
user is not authorized to view POPs.
Action: No action is required.
Name: ivmgrd_s_attach_pop_unauthz
Action: Only grant both of these capabilities to the
same administrator under special controlled
circumstances or to a highly trusted user.
Number: 0x14c0126c (348131948)
Name: ivmgrd_s_am_together
Component: mgr / ivmgrd_s_objmgmt
Severity: Error
Number: 0x14c01267 (348131943)
Severity: Warning
Component: mgr / ivmgrd_s_objmgmt
HPDMG0616W One or more ACL entries contain
both the Add (A) and Delete (d)
capabilities. These capabilities
potentially create a security
vulnerability if they are granted to an
administrator of a group. The
administrator may then add any user to
the group and then delete the user.
Explanation: With both capabilities, the administrator
of a group of users may add any user to the group and
then delete user.
Action: Only grant both of these capabilities to the
same administrator under special controlled
circumstances or to a highly trusted user.
Name: ivmgrd_s_ad_together
Number: 0x14c01268 (348131944)
Severity: Warning
Component: mgr / ivmgrd_s_objmgmt
HPDMG0621E The user is not authorized to view
attached Rule information.
Explanation: Attached Rule information is available at
the specified protected object location, however, the
user is not authorized to view Rules.
Action: No action is required.
Name: ivmgrd_s_attach_rule_unauthz
Number: 0x14c0126d (348131949)
Severity: Error
Component: mgr / ivmgrd_s_objmgmt
HPDMG0622E The user is not authorized to view
effective ACL information.
Explanation: Effective ACL information is available at
the specified protected object location, however, the
user is not authorized to view ACLs.
Action: No action is required.
Name: ivmgrd_s_effect_acl_unauthz
Number: 0x14c0126e (348131950)
Severity: Error
Component: mgr / ivmgrd_s_objmgmt
180
Error Message Reference
HPDMG0623E The user is not authorized to view
effective POP information.
Explanation: Effective POP information is available at
the specified protected object location, however, the
user is not authorized to view POPs.
Action: No action is required.
Name: ivmgrd_s_effect_pop_unauthz
Number: 0x14c0126f (348131951)
Severity: Error
HPDMG0627E The user is not authorized to view
one or more protected objects where the
requested authzrule is attached.
Explanation: See text.
Action: No action is required.
Name: ivmgrd_s_rule_object_unauthz
Number: 0x14c01273 (348131955)
Severity: Error
Component: mgr / ivmgrd_s_objmgmt
Component: mgr / ivmgrd_s_objmgmt
HPDMG0624E The user is not authorized to view
effective Rule information.
Explanation: Effective Rule information is available at
the specified protected object location, however, the
user is not authorized to view Rules.
Action: No action is required.
Name: ivmgrd_s_effect_rule_unauthz
Number: 0x14c01270 (348131952)
Severity: Error
Component: mgr / ivmgrd_s_objmgmt
HPDMG0625E The user is not authorized to view
one or more protected objects where the
requested ACL is attached.
Explanation: See text.
Action: No action is required.
Name: ivmgrd_s_acl_object_unauthz
HPDMG0628E The specified network addresses
cannot be processed by the Tivoli
Access Manager policy server.
Explanation: This error may occurr if the network
addresses are invalid, or the addresses are in IPv6
format and the Tivoli Access Manager policy server is
running on an operating system that does not support
IPv6.
Action: No action is required.
Name: ivmgrd_s_pop_invalid_ip
Number: 0x14c01274 (348131956)
Severity: Error
Component: mgr / ivmgrd_s_objmgmt
HPDMG0752E More than one matching
Distinguished Name (DN) was found.
Explanation: Multiple entries have been found in the
LDAP registry when only one was expected.
Number: 0x14c01271 (348131953)
Action: Ensure that the LDAP registry has not been
modified using external tools.
Severity: Error
Name: ivmgrd_s_ira2_multiple_dn_found
Component: mgr / ivmgrd_s_objmgmt
Number: 0x14c012f0 (348132080)
Severity: Error
HPDMG0626E The user is not authorized to view
one or more protected objects where the
requested POP is attached.
Explanation: See text.
Action: No action is required.
Name: ivmgrd_s_pop_object_unauthz
Number: 0x14c01272 (348131954)
Severity: Error
Component: mgr / ivmgrd_s_objmgmt
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0753E An invalid format of the
authorization mechanism attribute was
found in the user entry.
Explanation: The correct format is
<AppName>:<mechanism>[,<mechanism>....]. The
default is Default:LDAP. This information is stored in
the secUser object’s secLoginType attribute.
Action: Ensure that the LDAP registry has not been
modified using external tools.
Name: ivmgrd_s_ira2_bad_sec_login_format
Number: 0x14c012f1 (348132081)
Chapter 1. Tivoli Access Manager Base Messages
181
Severity: Error
Number: 0x14c012f5 (348132085)
Component: mgr / ivmgrd_s_ldaprgy
Severity: Warning
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0754W The entry was not found. If a user or
group is being created, ensure that the
Distinguished Name (DN) specified has
the correct syntax and is valid.
Explanation: A search of the LDAP registry did not
locate the entry.
Action: Ensure that the name specified is correct. If a
user or group is being created or imported, ensure that
the Distinguished Name (DN) specified has the correct
syntax and is valid.
HPDMG0758W The Distinguished Name (DN) is
already configured as a group.
Explanation: This error can occur when creating or
importing a group. It is generated because the DN
provided has been successfully created or imported
before.
Action: Ensure that the DN specified is correct.
Name: ivmgrd_s_ira2_entry_already_ secgroup
Name: ivmgrd_s_ira2_no_entry_found
Number: 0x14c012f6 (348132086)
Number: 0x14c012f2 (348132082)
Severity: Warning
Severity: Warning
Component: mgr / ivmgrd_s_ldaprgy
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0755W The specified Distinguished Name
(DN) does not exist.
HPDMG0759W The user name already exists in the
registry.
Action: Make sure the specified DN is a valid LDAP
entry.
Explanation: A user already exists with the user name
chosen. If Microsoft® Active Directory registry is used,
the error may apply to the sAMAccountName,
userPrincipalName or the CN attributes of the registry
user object.
Name: ivmgrd_s_ira2_no_dn_found
Action: Specify a different user name.
Number: 0x14c012f3 (348132083)
Name: ivmgrd_s_ira2_uid_already_exists
Severity: Warning
Number: 0x14c012f7 (348132087)
Component: mgr / ivmgrd_s_ldaprgy
Severity: Warning
Explanation: See message.
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0756W Incorrect current password.
Explanation: The correct current password must be
provided to be able to change the password.
HPDMG0760W The group name already exists in the
registry.
Action: Retry the change password operation
specifying the correct current password.
Explanation: A group already exists with the group
name chosen.
Name: ivmgrd_s_ira2_invalid_old_password
Action: Specify a different group name.
Number: 0x14c012f4 (348132084)
Name: ivmgrd_s_ira2_gid_already_exists
Severity: Warning
Number: 0x14c012f8 (348132088)
Component: mgr / ivmgrd_s_ldaprgy
Severity: Warning
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0757W The Distinguished Name (DN) is
already configured as a user.
Explanation: This error can occur when creating or
importing a user. It is generated because the DN
provided has been successfully created or imported
before.
Action: Ensure that the DN specified is correct.
Name: ivmgrd_s_ira2_entry_already_ secuser
182
Error Message Reference
HPDMG0761W The entry referred to by the
Distinguished Name (DN) must be a
person entry.
Explanation: Tivoli Access Manager validates that the
Distinguished Name (DN) provided is the DN of a
person entry.
Action: Ensure that the DN specified refers to a
person type entry.
Name: ivmgrd_s_ira2_not_a_user_dn
Number: 0x14c012f9 (348132089)
Severity: Warning
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0762W The entry referred to by the
Distinguished Name (DN) must be a
group entry.
Explanation: Tivoli Access Manager validates that the
Distinguished Name (DN) provided is the DN of a
group (accessGroup, groupOfNames, or
groupOfUniqueNames).
Action: Ensure that the DN specified refers to a group
type entry.
HPDMG0765W The request made to the LDAP
server exceeded the server’s configured
time limit.
Explanation: The LDAP server can be configured for
the maximum amount of time allowed to process a
request. If it takes too long to fulfill a particular
request, then this error is returned.
Action: Ensure that the LDAP server is configured to
allow adequate time to process requests. This time
might have to be extended if the server is busy.
Name: ivmgrd_s_ira2_timelimit_exceeded
Number: 0x14c012fd (348132093)
Severity: Warning
Component: mgr / ivmgrd_s_ldaprgy
Name: ivmgrd_s_ira2_not_a_group_dn
Number: 0x14c012fa (348132090)
Severity: Warning
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0763E LDAP is not configured as a registry
of users and groups.
Explanation: During configuration of Tivoli Access
Manager, LDAP was not chosen as the registry type to
store user and group information.
HPDMG0766W The search request exceeded the
maximum number of entries the LDAP
server is allowed to return.
Explanation: This limit is imposed from two sources.
First, the LDAP server has a configurable size limit
setting. Second, Tivoli Access Manager has a default
size limit of 2048. The effective size limit will be the
smaller of the two.
Action: Reconfigure Tivoli Access Manager if the
LDAP registry should have been selected.
Action: Ensure that the LDAP server is configured to
allow the number of entries required to be returned.
The Tivoli Access Manager limit can be set using the
max-search-size parameter in the [ldap] stanza of the
.conf configuration file.
Name: ivmgrd_s_ira2_ldap_not_supported
Name: ivmgrd_s_ira2_sizelimit_exceeded
Number: 0x14c012fb (348132091)
Number: 0x14c012fe (348132094)
Severity: Error
Severity: Warning
Component: mgr / ivmgrd_s_ldaprgy
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0764E An internal error has occurred.
HPDMG0767E The Distinguished Name (DN) has an
invalid syntax.
Explanation: This error indicates an unexpected
condition has occurred. For example, this may be
generated if a return code is received from the LDAP
server that was unexpected.
Action: Retry the operation and if the problem
persists contact your IBM service representative to
report the condition.
Explanation: A Distinguished Name (DN) consists of a
set of attribute value assertions (for example, o=ibm)
separated by commas. Either the DN specified is
invalid or a value input when used to construct the DN
caused an invalid DN to be constructed.
Action: Ensure the DN syntax is correct.
Name: ivmgrd_s_ira2_internal_error
Name: ivmgrd_s_ira2_invalid_dn_syntax
Number: 0x14c012fc (348132092)
Number: 0x14c012ff (348132095)
Severity: Error
Severity: Error
Component: mgr / ivmgrd_s_ldaprgy
Component: mgr / ivmgrd_s_ldaprgy
Chapter 1. Tivoli Access Manager Base Messages
183
HPDMG0768E Unable to login.
Explanation: The password or login Distinguished
Name (DN) is incorrect.
Action: Ensure that the admin-dn or admin-pwd in
the [ldap] stanza of the .conf configuration files have
not been modified. If the configuration has been
modified or corrupted, restore the configuration from a
backup copy or reconfigure.
Name: ivmgrd_s_ira2_invalid_credentials
Number: 0x14c01300 (348132096)
Severity: Error
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0771E Cannot delete the entry completely
because it has unexpected subentries in
the LDAP registry. This is usually
because the user or group being deleted
is a member of another domain.
Explanation: An attempt was made to delete an entry
in the LDAP namespace. However, the entry contains
subentries that cannot be deleted. If a user or group is
being deleted, ensure the user or group Distinguished
Name (DN) is not a member of another domain.
Action: Tivoli Access Manager is unable to delete the
entry. If a user or group is being deleted with the
-registry option, check to ensure that the user or group
is not a member of another domain and retry the
operation.
HPDMG0769E There were insufficient LDAP access
privileges to allow Tivoli Access
Manager to create and delete entries in
the registry.
Name: ivmgrd_s_ira2_not_allowed_on_ nonleaf
Explanation: The portion of the LDAP namespace
where users and groups are created or maintained must
have access contol lists (ACLs) set to permit the Tivoli
Access Manager Security Group proper authority. This
access is normally set when the policy server is
configured.
Component: mgr / ivmgrd_s_ldaprgy
Action: Ensure that the LDAP server access controls
allow the Tivoli Access Manager Security Group to
create and delete entries in the namespace.
Name: ivmgrd_s_ira2_insufficient_access
Number: 0x14c01301 (348132097)
Severity: Error
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0770E The settings defined for the entry are
invalid (object class violation).
Explanation: An attempt to create or update an entry
in the LDAP registry failed because it did not agree
with the LDAP schema definition. For example, an
attribute was given a value larger than the maximum
size allowed by the attribute’s LDAP schema definition.
Number: 0x14c01303 (348132099)
Severity: Error
HPDMG0772W The entry already exists.
Explanation: See message.
Action: Choose a different name or accept the existing
entry.
Name: ivmgrd_s_ira2_already_exists
Number: 0x14c01304 (348132100)
Severity: Warning
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0773E The request failed because the LDAP
server is down.
Explanation: See message.
Action: Activate the LDAP server, restart Tivoli Access
Manager, and retry the operation.
Name: ivmgrd_s_ira2_server_down
Number: 0x14c01305 (348132101)
Action: Ensure that the Tivoli Access Manager schema
is correctly applied. This is normally automatically
done when the policy server is configured.
Severity: Error
Name: ivmgrd_s_ira2_object_class_ violation
HPDMG0774E Illegal characters were specified in
the LDAP search filter.
Number: 0x14c01302 (348132098)
Severity: Error
Component: mgr / ivmgrd_s_ldaprgy
Component: mgr / ivmgrd_s_ldaprgy
Explanation: When Tivoli Access Manager attempted
a search request, the resulting filter was unacceptable to
LDAP.
Action: If a pattern is being specified, ensure that it is
syntactically correct. If a user or group name is being
specified, ensure that it does not contain special
characters that could cause the filter to be invalid.
184
Error Message Reference
Name: ivmgrd_s_ira2_filter_error
Severity: Error
Action: Ensure that the server’s SSL certificate is
correct and that the Tivoli Access Manager key file
contains a certificate of the Certificate Authority
(signer) that can validate the certificate.
Component: mgr / ivmgrd_s_ldaprgy
Name: ivmgrd_s_ira2_ssl_initialize_ failed
Number: 0x14c01306 (348132102)
Number: 0x14c0130a (348132106)
HPDMG0775E Not enough memory was available to
perform the operation.
Explanation: See message.
Action: Restart Tivoli Access Manager and retry the
operation.
Name: ivmgrd_s_ira2_no_memory
Number: 0x14c01307 (348132103)
Severity: Error
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0776E An error connecting to the LDAP
server has occurred.
Explanation: A connection could not be established
with the configured LDAP server.
Action: Ensure that the LDAP server has the correct
configured host name and port number and that the
server is active.
Name: ivmgrd_s_ira2_connect_error
Number: 0x14c01308 (348132104)
Severity: Error
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0777W The LDAP referral limit was
exceeded.
Explanation: The LDAP servers can be configured
with referrals from one server to another to split the
namespace. There is a maximum number of referrals
that is followed to locate the final server. This default is
10.
Severity: Error
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0779E An SSL parameter error occurred
when connecting to the LDAP server.
Explanation: Tivoli Access Manager attempted to
create an SSL connection with the LDAP server but the
SSL session could not be established.
Action: Ensure that the server’s SSL certificate is
correct and that the Tivoli Access Manager key file
contains a certificate of the Certificate Authority
(signer) which can validate that certificate.
Name: ivmgrd_s_ira2_ssl_param_error
Number: 0x14c0130b (348132107)
Severity: Error
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0780E The SSL handshake failed when
connecting to the LDAP server.
Explanation: Tivoli Access Manager attempted to
create an SSL connection with the LDAP server but the
SSL session could not be established.
Action: Ensure that the server’s SSL certificate is
correct and that the Tivoli Access Manager key file
contains a certificate of the Certificate Authority
(signer) which can validate that certificate.
Name: ivmgrd_s_ira2_ssl_handshake_failed
Number: 0x14c0130c (348132108)
Severity: Error
Action: Ensure that the network of LDAP servers
using referrals does not exceed the limit.
Component: mgr / ivmgrd_s_ldaprgy
Name: ivmgrd_s_ira2_referral_limit_ exceeded
HPDMG0781E SSL failed to establish the requested
encryption cipher level when connecting
to the LDAP server.
Number: 0x14c01309 (348132105)
Severity: Warning
Component: mgr / ivmgrd_s_ldaprgy
Explanation: Tivoli Access Manager attempted to
establish an SSL connection with the LDAP server but
was unable to acquire the required cipher.
HPDMG0778E The SSL initialization failed for
connection to the LDAP server.
Action: Configure the LDAP server SSL settings for a
lower encryption cipher level and retry the operation.
Explanation: Tivoli Access Manager attempted to
create an SSL connection with the LDAP server but the
SSL session could not be established.
Name: ivmgrd_s_ira2_ssl_get_cipher_ failed
Number: 0x14c0130d (348132109)
Severity: Error
Chapter 1. Tivoli Access Manager Base Messages
185
Component: mgr / ivmgrd_s_ldaprgy
correctly applied. This is normally automatically done
when the policy server is configured.
HPDMG0782E SSL was not available for connection
to the LDAP server.
Name: ivmgrd_s_ira2_no_attribute
Explanation: Tivoli Access Manager was configured to
use SSL for connection with the LDAP server but the
SSL support is not available.
Action: Ensure that the GSKit is properly installed.
See the Tivoli Access Manager Base Installation Guide
for information to install GSKit.
Name: ivmgrd_s_ira2_ssl_not_available
Number: 0x14c0130e (348132110)
Severity: Error
Component: mgr / ivmgrd_s_ldaprgy
Number: 0x14c01312 (348132114)
Severity: Error
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0787E Unable to sign certificate due to
unexpected error (0x%8.8lx).
Explanation: An unexpected internal processing error
has occurred while trying to create an SSL certificate.
Action: Refer to the Tivoli Access Manager error log
for more information. If the problem persists, contact
your IBM service representative to report the condition.
Name: ivmgrd_s_ira2_unexpected
HPDMG0783E The SSL Key Database File was not
found for connection to the LDAP
server.
Explanation: Tivoli Access Manager attempted to open
an SSL connection with the LDAP server but could not
locate the specified key database file.
Action: Ensure that the configured Key Database File
has the correct name and that the permissions allow
Tivoli Access Manager to read the file.
Name: ivmgrd_s_ira2_ssl_keyring_not_ found
Number: 0x14c0130f (348132111)
Severity: Error
Component: mgr / ivmgrd_s_ldaprgy
Number: 0x14c01313 (348132115)
Severity: Error
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0788E Unable to sign certificate due to an
unexpected error.
Explanation: An unexpected internal processing error
has occurred while trying to create an SSL certificate.
Action: Refer to the Tivoli Access Manager error log
for more information. If the problem persists, contact
your IBM service representative to report the condition.
Name: ivmgrd_s_ira2_certfailed
Number: 0x14c01314 (348132116)
HPDMG0784E The SSL password was not specified
for connection to the LDAP server.
Explanation: Tivoli Access Manager attempted to open
an SSL connection with the LDAP server but no
password for the key database file was specified.
Action: Ensure that the correct password is configured
for the Tivoli Access Manager key database file.
Name: ivmgrd_s_ira2_ssl_password_ not_specified
Number: 0x14c01310 (348132112)
Severity: Error
Component: mgr / ivmgrd_s_ldaprgy
Severity: Error
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0789W The user Distinguished Name (DN)
cannot be created because it already
exists.
Explanation: This error can occur when creating a
user. It is generated because the DN provided already
exists in the registry.
Action: You can either choose to delete this DN and
retry the operation or use the import command to
make the DN specified a Tivoli Access Manager user.
Name: ivmgrd_s_ira2_user_already_exists
HPDMG0786E Unable to sign certificate because of
missing attribute definitions in the
LDAP schema.
Explanation: The LDAP schema for the secCertDN
and secCertSerialNumber attributes is missing.
Action: Ensure that LDAP is properly configured and
that the Tivoli Access Manager schema has been
186
Error Message Reference
Number: 0x14c01315 (348132117)
Severity: Warning
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0790W The group Distinguished Name
(DN) cannot be created because it
already exists.
Explanation: This error can occur when creating a
group. It is generated because the DN provided already
exists in the registry.
Severity: Error
Component: mgr / ivmgrd_s_gso
HPDMG0902E LDAP server SSL initialization failed.
Explanation: Tivoli Access Manager cannot initialize
an SSL session with the LDAP server.
Action: You can either choose to delete this DN and
retry the operation or use the import command to
make the DN specified a Tivoli Access Manager group.
Action: Ensure the LDAP server is properly
configured and is up and running.
Name: ivmgrd_s_ira2_group_already_exists
Name: ivmgrd_s_gso_cant_init_ssl
Number: 0x14c01316 (348132118)
Number: 0x14c01386 (348132230)
Severity: Warning
Severity: Error
Component: mgr / ivmgrd_s_ldaprgy
Component: mgr / ivmgrd_s_gso
HPDMG0793E Duplicate member assignment was
attempted. No members have been
added.
HPDMG0903E The LDAP server cannot be located.
Explanation: All members to be added to a group
must be new members.
Action: Ensure the LDAP server is properly
configured and is up and running.
Action: Remove users from the list that are already
members of the group.
Name: ivmgrd_s_gso_no_ldap_serv
Name: ivmgrd_s_ira2_duplicate_group_ member
Number: 0x14c01319 (348132121)
Severity: Error
Explanation: Tivoli Access Manager cannot initialize
an SSL session with the LDAP server.
Number: 0x14c01387 (348132231)
Severity: Error
Component: mgr / ivmgrd_s_gso
Component: mgr / ivmgrd_s_ldaprgy
HPDMG0904E LDAP server bind options cannot be
initialized.
HPDMG0900E The Distinguished Name (DN) cannot
be determined.
Explanation: Tivoli Access Manager has encountered
bind option errors while attempting to contact the
LDAP server.
Explanation: The specified entry cannot be found on
the LDAP server, or more than one exists when only
one was expected.
Action: Ensure the resource or resource group name is
correct.
Action: Refer to the Tivoli Access Manager error log
for more information. If the problem persists, contact
your IBM service representative to report the condition.
Name: ivmgrd_s_gso_cant_init_ldap_opt
Name: ivmgrd_s_gso_cant_determine_dn
Number: 0x14c01388 (348132232)
Number: 0x14c01384 (348132228)
Severity: Error
Severity: Error
Component: mgr / ivmgrd_s_gso
Component: mgr / ivmgrd_s_gso
HPDMG0901E Cannot determine the exported
suffixes on the LDAP Server.
HPDMG0905E Invalid parameters passed to GSO
Management API.
Explanation: The LDAP server encountered an error
while performing a suffix search.
Explanation: Invalid parameter data has been
provided to the Global Sign-On (GSO) Management
API.
Action: Refer to the Tivoli Access Manager error log
for more information. If the problem persists, contact
your IBM service representative to report the condition.
Action: Refer to the Tivoli Access Manager error log
for more information. If the problem persists, contact
your IBM service representative to report the condition.
Name: ivmgrd_s_gso_no_suffixes
Name: ivmgrd_s_gso_mgmt_invalid_parm
Number: 0x14c01385 (348132229)
Number: 0x14c01389 (348132233)
Chapter 1. Tivoli Access Manager Base Messages
187
Severity: Error
Component: mgr / ivmgrd_s_gso
HPDMG0906E The configured LDAP server is not
correct version.
Explanation: A downlevel version of The LDAP server
is configured into Tivoli Access Manager. This can
result from upgrading Access Manager without
upgrading the LDAP server.
Action: Ensure the supported version of LDAP server
is configured into the Tivoli Access Manager
environment.
Name: ivmgrd_s_gso_ldap_not_version3
Number: 0x14c0138a (348132234)
Severity: Error
Component: mgr / ivmgrd_s_gso
HPDMG0907E A memory allocation error in the
GSO Management API.
Explanation: A error occurredThe Global Sign-On
(GSO) Management API attempted to allocate memory.
Action: This is potentially a temporary condition.
Attempt to free up memory by closing other running
applications. If the problem persists, increase the
system memory in the machine
Name: ivmgrd_s_gso_out_of_memory
Number: 0x14c0138b (348132235)
Severity: Error
Component: mgr / ivmgrd_s_gso
Action: Refer to the Tivoli Access Manager error log
for more information. If the problem persists, contact
your IBM service representative to report the condition.
Name: ivmgrd_s_gso_mgmt_invalid_data
Number: 0x14c0138d (348132237)
Severity: Error
Component: mgr / ivmgrd_s_gso
HPDMG0910E Cannot find the member resource.
Explanation: An attempt was made to remove a
Global Sign-On (GSO) resource from a resource group,
but the resource was not a member.
Action: Ensure that the name of the resource to be
removed exists and is a member of the resource group.
Name: ivmgrd_s_gso_location_notfound
Number: 0x14c0138e (348132238)
Severity: Error
Component: mgr / ivmgrd_s_gso
HPDMG0911E Cannot access GSO database. Invalid
user name or password.
Explanation: The Tivoli Access Manager policy server
attempted to access the Global Sign-On (GSO) database
but the identity was not authorized
Action: Ensure that the directory server access control
settings have not been altered. The policy server
identity, specified in the ivmgrd.conf file, must have the
authority to search and make updates to the Global
Sign-On (GSO) data.
Name: ivmgrd_s_gso_no_authentication
HPDMG0908E Cannot perform remove operation,
because subdirectories exist.
Explanation: An attempt was made to remove Tivoli
Access Manager Global Sign-On (GSO) resource object
without first removing its subobjects.
Action: Remove the GSO subobjects then retry the
operation.
Number: 0x14c0138f (348132239)
Severity: Error
Component: mgr / ivmgrd_s_gso
HPDMG0912E User not authorized to perform
operation.
Component: mgr / ivmgrd_s_gso
Explanation: The portion of the LDAP namespace
where users and groups are created or maintained must
have access contol lists (ACLs) set to permit the Tivoli
Access Manager Security Group proper authority. This
access is normally set when the policy server is
configured.
HPDMG0909E GSO Management API reports that
invalid data was specified.
Action: Ensure that the LDAP server access controls
allow the Tivoli Access Manager Security Group to
access entries in the namespace.
Name: ivmgrd_s_gso_children_exist
Number: 0x14c0138c (348132236)
Severity: Error
Explanation: Invalid parameter data has been
provided to the Global Sign-On (GSO) Management
API.
Name: ivmgrd_s_gso_no_authorization
Number: 0x14c01390 (348132240)
Severity: Error
188
Error Message Reference
Component: mgr / ivmgrd_s_gso
for the specified user to specify the account information
(user id and password).
HPDMG0913E Cannot connect to GSO database
LDAP Server. Either the LDAP Server is
inactive or busy.
Name: ivmgrd_s_gso_no_rescredaccount
Explanation: See text.
Action: Retry this operation when the LDAP Server is
available.
Name: ivmgrd_s_gso_no_connection
Number: 0x14c01391 (348132241)
Severity: Error
Component: mgr / ivmgrd_s_gso
HPDMG0914E GSO database not found on LDAP
server.
Explanation: The Tivoli Access Manager is unable to
locate the Global Sign-On (GSO) objects in the user
registry.
Action: Ensure the Tivoli Access Manager Global
Sign-On (GSO) definition is properly defined in the
user registry. Also, verify the Access Manager is
configured properly.
Name: ivmgrd_s_gso_no_gso_database
Number: 0x14c01392 (348132242)
Severity: Error
Component: mgr / ivmgrd_s_gso
HPDMG0915E No SSL connection exists between
Tivoli Access Manager and the LDAP
server.
Explanation: Tivoli Access Manager attempted to
create an SSL connection with the LDAP server but the
SSL session could not be established.
Action: Ensure that the server’s SSL certificate is
correct and that the Tivoli Access Manager key file
contains a certificate of the Certificate Authority
(signer) that can validate the certificate.
Name: ivmgrd_s_gso_no_sslconn
Number: 0x14c01393 (348132243)
Severity: Error
Component: mgr / ivmgrd_s_gso
HPDMG0916E No account information for GSO
resource credential found.
Explanation: A request was made to retrieve the
account information from a Global Sign-On (GSO)
resource credential but none was found.
Number: 0x14c01394 (348132244)
Severity: Error
Component: mgr / ivmgrd_s_gso
HPDMG0917E The specified GSO resource
credential was not found.
Explanation: The Global Sign-On (GSO) resource
credential was not found at the LDAP server.
Action: Ensure that the Global Sign-On (GSO)
resource credential is specified correctly for the user
indicated and that the resource credential type (web or
group) is specified correctly. The pdadmin rsrccred list
user command can be used to determine the set of
defined credentials for the user.
Name: ivmgrd_s_gso_no_rescred
Number: 0x14c01395 (348132245)
Severity: Error
Component: mgr / ivmgrd_s_gso
HPDMG0918E The requested GSO resource was not
found.
Explanation: The Global Sign-On (GSO) resource was
not found at the LDAP server.
Action: Ensure that the Global Sign-On (GSO)
resource is specified correctly. The pdadmin rsrc list
command can be used to determine the current set of
defined resources.
Name: ivmgrd_s_gso_no_resource
Number: 0x14c01396 (348132246)
Severity: Error
Component: mgr / ivmgrd_s_gso
HPDMG0919E The GSO resource type could not be
determined.
Explanation: The Global Sign-On (GSO) resource type
could not be retrieved from the LDAP server.
Action: Refer to the Tivoli Access Manager error log
for more information. If the problem persists, contact
your IBM service representative to report the condition.
Name: ivmgrd_s_gso_no_resource_type
Number: 0x14c01397 (348132247)
Severity: Error
Component: mgr / ivmgrd_s_gso
Action: Either create or modify the resource credential
Chapter 1. Tivoli Access Manager Base Messages
189
HPDMG0920E Resource group not found.
HPDMG0924E Object not found.
Explanation: The specified Global Sign-On (GSO)
resource group was not found at the LDAP server.
Explanation: The specified Global Sign-On (GSO)
resource, resource group or resource credential could
not be found.
Action: Ensure that the resource group was specified
correctly. The pdadmin rsrcgroup list command can be
used to determine the current set of defined resource
groups.
Name: ivmgrd_s_gso_no_gso_domain
Number: 0x14c01398 (348132248)
Severity: Error
Action: Ensure that the name of the resource, resource
group or resource credential is specified correctly.
Name: ivmgrd_s_gso_object_not_found
Number: 0x14c0139c (348132252)
Severity: Error
Component: mgr / ivmgrd_s_gso
Component: mgr / ivmgrd_s_gso
HPDMG0921E The specified user identity was not
found.
Explanation: The specified user is not known to Tivoli
Access Manager.
Action: Specify a user that is defined to Tivoli Access
Manager.
Name: ivmgrd_s_gso_no_user_identity
Number: 0x14c01399 (348132249)
Severity: Error
Component: mgr / ivmgrd_s_gso
HPDMG0922E The specified user is not a GSO user.
Explanation: The specified user is not configured as a
Global Sign-On (GSO) user.
Action: Use pdadmin to configure the user as a Global
Sign-On (GSO) user.
HPDMG0925E An unexpected exception occurred in
the GSO Management API.
Explanation: Tivoli Access Manager encountered an
unexpected error while processing Global Sign-On
(GSO) data.
Action: Check the Tivoli Access Manager error log for
additional information. If after re-trying the operation,
the error appears to be unrecoverable, report to your
IBM service representative.
Name: ivmgrd_s_gso_unexp_exception
Number: 0x14c0139d (348132253)
Severity: Error
Component: mgr / ivmgrd_s_gso
HPDMG0931E The specified user is inactive.
Explanation: The specified user is a defined Tivoli
Access Manager user, but is not active.
Number: 0x14c0139a (348132250)
Action: Ensure the desired user is both an active
Tivoli Access Manager user, and a Global Sign-On
(GSO) user.
Severity: Error
Name: ivmgrd_s_gso_user_inactive
Component: mgr / ivmgrd_s_gso
Number: 0x14c013a3 (348132259)
Name: ivmgrd_s_gso_no_gso_user
Severity: Error
HPDMG0923E Object already exists.
Explanation: The Global Sign-On (GSO) resource,
resource group or resource credential already exists.
Action: Either choose a different name for the object
being created or delete the existing object and re-create
it.
Name: ivmgrd_s_gso_object_exists
Number: 0x14c0139b (348132251)
Severity: Error
Component: mgr / ivmgrd_s_gso
Component: mgr / ivmgrd_s_gso
HPDMG0932E The GSO Management Function is
not implemented.
Explanation: Tivoli Access Manager attempted to
perform a Global Sign-On (GSO) function which is not
supported.
Action: Contact your IBM service representative to
report the condition.
Name: ivmgrd_s_gso_not_implemented
Number: 0x14c013a4 (348132260)
Severity: Error
190
Error Message Reference
Component: mgr / ivmgrd_s_gso
HPDMG0937E LDAP is not enabled in the ivmgrd
configuration file.
Explanation: LDAP is not enabled in the ldap stanza
of the iv.conf file.
Action: Modify the configuration file to enable LDAP.
Name: ivmgrd_s_gso_ldap_not_enabled
Number: 0x14c013a9 (348132265)
Severity: Error
Component: mgr / ivmgrd_s_gso
HPDMG0960E An LDAP limit (timelimit or
sizelimit) was exceeded.
Explanation: See text.
Action: Ensure the LDAP server is correctly
configured.
Name: ivmgrd_s_gso_ldap_limit_exceeded
Number: 0x14c013c0 (348132288)
Severity: Error
Component: mgr / ivmgrd_s_gso
HPDMG0961E An unrecoverable LDAP error has
occurred.
HPDMG0942E The GSO management function
returns unknown error.
Explanation: See text.
Explanation: An unknown error has been returned by
the Global Sign-On (GSO) Management API
Action: Refer to the Tivoli Access Manager error log
for more information. If the problem persists, contact
your IBM service representative to report the condition.
Action: Refer to the Tivoli Access Manager error log
for more information. If the problem persists, contact
your IBM service representative to report the condition.
Name: ivmgrd_s_gso_unrecoverable_ ldap_error
Number: 0x14c013c1 (348132289)
Name: ivmgrd_s_gso_unknown_error
Severity: Error
Number: 0x14c013ae (348132270)
Component: mgr / ivmgrd_s_gso
Severity: Error
Component: mgr / ivmgrd_s_gso
HPDMG0943E Invalid name.
Explanation: Tivoli Access Manager invoked the
Global Sign-On (GSO) interface with an invalid name.
Action: Report this error to your IBM service
representative.
Name: ivmgrd_s_gso_invalid_name
HPDMG1052E A registry memory allocation failed.
Explanation: An attempt to allocate memory using the
registry adapter API returned a NULL pointer.
Action: Contact your IBM service representative.
Name: ivmgrd_s_uraf_no_memory
Number: 0x14c0141c (348132380)
Severity: Error
Component: mgr / ivmgrd_s_uraf
Number: 0x14c013af (348132271)
Severity: Error
HPDMG1053E The configuration file is invalid.
Component: mgr / ivmgrd_s_gso
Explanation: One of the configuration files (for
example, domino.conf) could not be opened or was
missing some required information.
HPDMG0957E Resource Type
Action: none needed
Action: Repair or replace the server and/or registry
.conf files in the etc subdirectory or contact your IBM
service representative.
Name: ivmgrd_s_gso_chpwd_col1_title
Name: ivmgrd_s_uraf_config_invalid
Number: 0x14c013bd (348132285)
Number: 0x14c0141d (348132381)
Severity: Error
Severity: Error
Component: mgr / ivmgrd_s_gso
Component: mgr / ivmgrd_s_uraf
Explanation: none needed
Chapter 1. Tivoli Access Manager Base Messages
191
HPDMG1054E A registry input/output error has
occurred.
HPDMG1058E The user is not defined in the
registry.
Explanation: The registry server had an error while
processing a request.
Explanation: The specified user ID was not found in
the registry database.
Action: Verify that the registry server is functioning
normally before retrying the operation.
Action: Verify that the user ID is spelled correctly and
that it exists in the registry database for the domain to
which you are logged in.
Name: ivmgrd_s_uraf_ioerror
Number: 0x14c0141e (348132382)
Severity: Error
Component: mgr / ivmgrd_s_uraf
Name: ivmgrd_s_uraf_nouser
Number: 0x14c01422 (348132386)
Severity: Error
Component: mgr / ivmgrd_s_uraf
HPDMG1055E A registry SSL error has occurred.
Explanation: An error occurred during Secure Sockets
Layer (SSL) communications with the registry server.
Action: Contact your IBM service representative.
HPDMG1059E Group is not defined in the Registry.
Explanation: The specified group ID was not found in
the registry database.
Number: 0x14c0141f (348132383)
Action: Verify that the group ID is spelled correctly
and that it exists in the registry database for the
domain to which you are logged in.
Severity: Error
Name: ivmgrd_s_uraf_nogroup
Component: mgr / ivmgrd_s_uraf
Number: 0x14c01423 (348132387)
Name: ivmgrd_s_uraf_sslerror
Severity: Error
HPDMG1056E A registry initialization error has
occurred.
Explanation: A registry API call was made with an
invalid parameter, or the registry type could not be
determined or is not configured correctly.
Action: Contact your IBM service representative.
Component: mgr / ivmgrd_s_uraf
HPDMG1064E The group member was not found.
Explanation: The group has no members or the
specified member was not found in the group.
Number: 0x14c01420 (348132384)
Action: Verify that the group name and member ID is
spelled correctly and that they both exist in the registry
database for the domain to which you are logged in.
Severity: Error
Name: ivmgrd_s_uraf_member_invalid
Component: mgr / ivmgrd_s_uraf
Number: 0x14c01428 (348132392)
Name: ivmgrd_s_uraf_initerror
Severity: Error
HPDMG1057E A registry data error has occurred.
Explanation: One of several basic registry functions
has failed.
Action: Verify that the registry server is functioning
normally before retrying the operation.
Component: mgr / ivmgrd_s_uraf
HPDMG1065E An invalid user type was specified.
Name: ivmgrd_s_uraf_dataerror
Explanation: When the calling program requested a
list of users it did not specifiy one of the 3 allowed
types.
Number: 0x14c01421 (348132385)
Action: Contact your IBM service representative.
Severity: Error
Name: ivmgrd_s_uraf_usertype_invalid
Component: mgr / ivmgrd_s_uraf
Number: 0x14c01429 (348132393)
Severity: Error
Component: mgr / ivmgrd_s_uraf
192
Error Message Reference
HPDMG1066E An invalid group type was specified.
Explanation: When the calling program requested a
list of groups it did not specifiy one of the 3 allowed
types.
HPDMG1070E An invalid resource identification
was specified.
Explanation: A resource that was expected to be in the
registry was not found.
Action: Contact your IBM service representative.
Action: Contact your IBM service representative.
Name: ivmgrd_s_uraf_grouptype_invalid
Name: ivmgrd_s_uraf_resource_invalid
Number: 0x14c0142a (348132394)
Number: 0x14c0142e (348132398)
Severity: Error
Severity: Error
Component: mgr / ivmgrd_s_uraf
Component: mgr / ivmgrd_s_uraf
HPDMG1067E The Universal Unique Identifier
(UUID) was not specified.
HPDMG1071E An invalid resource group
identification was specified.
Explanation: The UUID used to find a user in the
registry was missing from the lookup operation.
Explanation: A resource group that was expected to
be in the registry was not found.
Action: Contact your IBM service representative.
Action: Contact your IBM service representative.
Name: ivmgrd_s_uraf_user_invalid
Name: ivmgrd_s_uraf_resgroup_invalid
Number: 0x14c0142b (348132395)
Number: 0x14c0142f (348132399)
Severity: Error
Severity: Error
Component: mgr / ivmgrd_s_uraf
Component: mgr / ivmgrd_s_uraf
HPDMG1068E An invalid group identification or
Distinguished Name (DN) was
specified.
HPDMG1072E Invalid resource credentials
identification was specified.
Explanation: A group operation was attempted for the
wrong domain or the group’s registryGID value (also
known as the DN) was invalid. The DN entered may
contain invalid characters or be in an invalid format.
Action: Correct the registry group ID (or DN) that you
specified and retry the operation.
Name: ivmgrd_s_uraf_group_invalid
Explanation: A resource credential that was expected
to be in the registry was not found.
Action: Contact your IBM service representative.
Name: ivmgrd_s_uraf_rescreds_invalid
Number: 0x14c01430 (348132400)
Severity: Error
Component: mgr / ivmgrd_s_uraf
Number: 0x14c0142c (348132396)
Severity: Error
Component: mgr / ivmgrd_s_uraf
HPDMG1069E An invalid policy identification was
specified.
Explanation: A user specific policy that was expected
to be in the registry was not found.
HPDMG1073E The user is already defined in the
registry.
Explanation: A user with the name you chose is
already in the registry.
Action: Select another name or a variation for this
user.
Name: ivmgrd_s_uraf_user_already_exists
Action: Contact your IBM service representative.
Number: 0x14c01431 (348132401)
Name: ivmgrd_s_uraf_policy_invalid
Severity: Error
Number: 0x14c0142d (348132397)
Component: mgr / ivmgrd_s_uraf
Severity: Error
Component: mgr / ivmgrd_s_uraf
Chapter 1. Tivoli Access Manager Base Messages
193
HPDMG1074E The group is already defined in the
registry.
HPDMG1078E The resource credentials are already
defined in the registry.
Explanation: A group with the name you chose is
already in the registry.
Explanation: A resource credential object with the
specified name already exists.
Action: Select another name or a variation for this
group.
Action: Select another name for which to create a
resource credential object.
Name: ivmgrd_s_uraf_group_already_exists
Name: ivmgrd_s_uraf_rescreds_already_ exists
Number: 0x14c01432 (348132402)
Number: 0x14c01436 (348132406)
Severity: Error
Severity: Error
Component: mgr / ivmgrd_s_uraf
Component: mgr / ivmgrd_s_uraf
HPDMG1075E The policy is already defined in the
registry.
HPDMG1079E The user registry identification is not
unique in the registry.
Explanation: A policy object already exists for the
chosen user.
Explanation: More than one user in the registry shares
the specified registryID.
Action: Contact your IBM service representative.
Action: Select another user registryID or modify the
users to have unique registry IDs.
Name: ivmgrd_s_uraf_policy_already_ exists
Number: 0x14c01433 (348132403)
Severity: Error
Component: mgr / ivmgrd_s_uraf
Name: ivmgrd_s_uraf_registry_user_ not_unique
Number: 0x14c01437 (348132407)
Severity: Error
Component: mgr / ivmgrd_s_uraf
HPDMG1076E The resource is already defined in the
registry.
Explanation: A resource object already exists with the
specified name.
Action: Select another name for the new resource
object.
Name: ivmgrd_s_uraf_resource_already_ exists
Number: 0x14c01434 (348132404)
Severity: Error
Component: mgr / ivmgrd_s_uraf
HPDMG1080E The group registry identification is
not unique in the registry.
Explanation: More than one group in the registry
shares the specified registryID.
Action: Select another group registryID or modify the
groups to have unique registry IDs.
Name: ivmgrd_s_uraf_registry_group_ not_unique
Number: 0x14c01438 (348132408)
Severity: Error
Component: mgr / ivmgrd_s_uraf
HPDMG1077E The resource group is already defined
in the registry.
Explanation: A resource group object with the
specified name already exists in the registry.
Action: Select another name for the new resource
group object.
Name: ivmgrd_s_uraf_resgroup_already_ exists
Number: 0x14c01435 (348132405)
Severity: Error
Component: mgr / ivmgrd_s_uraf
HPDMG1081W Not all requested users were
assigned to group (%s).
Explanation: There was a problem assigning one or
more users to a group.
Action: Make sure the users in the user list are
specified correctly.
Name: ivmgrd_s_uraf_not_all_users_
assigned_to_group
Number: 0x14c01439 (348132409)
Severity: Warning
Component: mgr / ivmgrd_s_uraf
194
Error Message Reference
HPDMG1082W Not all requested users were
removed from group (%s).
HPDMG1086W The domain has been re-created
successfully.
Explanation: There was a problem removing one or
more users from a group.
Explanation: The domain being created had
previously existed and had not been removed from the
registry.
Action: Make sure the users in the user list are
specified correctly.
Name: ivmgrd_s_uraf_not_all_users_
removed_from_group
Action: Ensure that the administrator intended to
re-create a previously deleted domain.
Name: ivmgrd_s_uraf_domain_recreated
Number: 0x14c0143a (348132410)
Number: 0x14c0143e (348132414)
Severity: Warning
Severity: Warning
Component: mgr / ivmgrd_s_uraf
Component: mgr / ivmgrd_s_uraf
HPDMG1083W The domain name already exists.
HPDMG1087E The domain name specified is
invalid.
Explanation: The name that you specified for the new
domain already exists in the registry.
Action: Choose another name for the new domain.
Name: ivmgrd_s_uraf_duplicate_domain_ name
Explanation: The domain name specified is not
allowed. Either the name is too long, contains invalid
characters, or does not match the Active Directory
domain name.
Severity: Warning
Action: Ensure that the domain name is not too long
and that for Active Directory it matches the Active
Directory domain name.
Component: mgr / ivmgrd_s_uraf
Name: ivmgrd_s_uraf_domain_name_invalid
Number: 0x14c0143b (348132411)
HPDMG1084W The domain name is unknown.
Explanation: The domain name that you specified
could not be found in the registry.
Action: Verify the spelling of the name of the domain
and retry the command.
Name: ivmgrd_s_uraf_no_such_domain_name
Number: 0x14c0143c (348132412)
Number: 0x14c0143f (348132415)
Severity: Error
Component: mgr / ivmgrd_s_uraf
HPDMG1088W The registry client is not available.
Explanation: An attempt was made to access a
registry type that is not installed.
Severity: Warning
Action: Make sure the same registry type is
configured for all servers.
Component: mgr / ivmgrd_s_uraf
Name: ivmgrd_s_uraf_client_not_available
HPDMG1085E The location specified in which to
create the management domain does not
exist.
Explanation: The location in which to create the
management domain that you specified could not be
found in the registry.
Action: Verify the location to be used to create the
management domain and retry the command.
Name: ivmgrd_s_uraf_no_such_domain_ suffix
Number: 0x14c0143d (348132413)
Severity: Error
Component: mgr / ivmgrd_s_uraf
Number: 0x14c01440 (348132416)
Severity: Warning
Component: mgr / ivmgrd_s_uraf
HPDMG1089W Multiple registry routing is not
supported.
Explanation: An attempt was made to use multiple
registry routing, which is not a supported function.
Action: Contact your IBM service representative.
Name: ivmgrd_s_uraf_registry_no_routing
Number: 0x14c01441 (348132417)
Severity: Warning
Component: mgr / ivmgrd_s_uraf
Chapter 1. Tivoli Access Manager Base Messages
195
HPDMG1090W The registry server is down or
cannot be contacted.
Explanation: An attempt to contact the registry server
failed. Either the server is not up or the
communications path to it has been disrupted.
Severity: Warning
Component: mgr / ivmgrd_s_uraf
HPDMG1094W The required list parameter is
missing from the API call.
Action: Verify that the registry server is up and
functioning normally and that this client can
communicate with it. If Active Directory is used as a
user registry, an incorrect distinguished name (DN)
input (if applicable) also results in this error.
Explanation: A program failed to provide a list
parameter that is required for the API call it made.
Name: ivmgrd_s_uraf_registry_server_down
Number: 0x14c01446 (348132422)
Number: 0x14c01442 (348132418)
Severity: Warning
Severity: Warning
Component: mgr / ivmgrd_s_uraf
Action: Contact your IBM service representative.
Name: ivmgrd_s_uraf_no_list
Component: mgr / ivmgrd_s_uraf
HPDMG1091W The user does not have the rights to
perform requested operation.
Explanation: The server has indicated the user does
not have the right to perform the requested operation.
Action: Verify that the user whose credentials are
being used has the authority to perform the requested
operation.
Name: ivmgrd_s_uraf_registry_insufficient_ access
Number: 0x14c01443 (348132419)
Severity: Warning
Component: mgr / ivmgrd_s_uraf
HPDMG1092W The registry client received a
non-SSL communications error when
communicating with the registry server.
Explanation: A non-SSL communication error occurred
between this server and the server that provides the
registry service.
Action: Verify that this server and its registry server
are configured correctly for non-SSL communications.
Name: ivmgrd_s_uraf_registry_nonssl_ error
Number: 0x14c01444 (348132420)
Severity: Warning
Component: mgr / ivmgrd_s_uraf
HPDMG1093W No more entries are in the list.
Explanation: A program processing a list of registry
entries has tried to get an entry beyond the end of the
list.
HPDMG1950E The user is already a member of the
group.
Explanation: The Tivoli Access Manager policy server
received a request to add a user to a group in which
the user was already a member.
Action: No action is required.
Name: ivmgrd_s_admin_user_member_ of_group
Number: 0x14c0179e (348133278)
Severity: Error
Component: mgr / ivmgrd_s_admin
HPDMG1951E The management domain is empty.
Explanation: The Tivoli Access Manager policy server
returned an empty value for the domain name.
Action: Ensure that the policy server is configured
correctly and is reachable.
Name: ivmgrd_no_management_domain_name
Number: 0x14c0179f (348133279)
Severity: Error
Component: mgr / ivmgrd_s_admin
HPDMG1952E The requested command is no longer
supported.
Explanation: An attempt was made to use a command
that is no longer supported in the installed version of
Tivoli Access Manager.
Action: Upgrade your application or revert to the
previously installed version of Tivoli Access Manager.
Name: ivmgrd_obsolete_command
Action: Contact your IBM service representative.
Number: 0x14c017a0 (348133280)
Name: ivmgrd_s_uraf_registry_end_of_list
Severity: Error
Number: 0x14c01445 (348132421)
Component: mgr / ivmgrd_s_admin
196
Error Message Reference
HPDMG1953E The admin command input data that
is required is missing or invalid.
Explanation: The Tivoli Access Manager policy server
received a request that contained incomplete or missing
input data.
Action: Ensure that all input data required for the
admin command is provided.
Name: ivmgrd_malformed_data
Number: 0x14c017a1 (348133281)
Severity: Error
Component: mgr / ivmgrd_s_admin
HPDMG1954E The requested command is not
supported for the registry specified.
Explanation: The Tivoli Access Manager policy server
received an administration command that is not
supported using the currently configured registry.
Action: Ensure that the administration command is
supported by the registry configured for Tivoli Access
Manager.
Name: ivmgrd_not_supported_for_registry
Number: 0x14c017a2 (348133282)
Severity: Error
Component: mgr / ivmgrd_s_admin
HPDMS0412E Invalid argument
Explanation: An invalid argument was passed to a
library routine that accesses a non-LDAP registry.
Action: Ensure that all arguments supplied to the
command line or programming interface are valid.
Name: miscivcore_invalid_argument
Number: 0x14c5219c (348463516)
Severity: Error
Component: mis / misc_s_ivcore
HPDMS0416E Unknown internal exception
Explanation: This typically means that there is interor intra-process contention for access to the policy
database.
Action: Stop and restart all of the Tivoli Access
Manager servers running on the system that exhibits
the error. If the problem persists, increase the
per-process limits of system resources (available
threads, available open file handles, and so forth),
reboot the system, and restart the Tivoli Access
Manager servers.
Name: miscivcore_unknown_internal_ exception
Number: 0x14c521a0 (348463520)
Severity: Error
Component: mis / misc_s_ivcore
HPDMG2100E The policy proxy server could not be
started (0x%8.8lx).
Explanation: The policy proxy server encountered an
error during initialization.
Action: Check pdmgrproxyd.log for additional
information.
Name: ivmgrd_s_proxy_could_not_start
Number: 0x14c01834 (348133428)
Severity: Fatal
Component: mgr / ivmgrd_s_general
HPDMS0406E Could not read from rule file %s
Explanation: The specified rule file could not be
opened or read.
Action: Ensure that the specified rule file exists on the
system and that the user who invoked pdadmin has
read permission on the file.
HPDMS0429E Invalid command
Explanation: The Tivoli Access Manager policy server
has received a command it does not recognize. This
may mean that the server is incompatible with the
client.
Action: Ensure the Tivoli Access Manager policy
server supports the release level of the clients.
Name: miscivcore_invalid_command
Number: 0x14c521ad (348463533)
Severity: Error
Component: mis / misc_s_ivcore
HPDMS0460I Could not open configuration file %s
Explanation: The specified configuration file could not
be opened or read.
Number: 0x14c52196 (348463510)
Action: Ensure that the specified configuration file
exists on the system and that the user who invoked
pdconf has read permission on the file. The file name
must include a valid absolute or relative path.
Severity: Error
Name: misccore_could_not_open_configuration_ fi
Component: mis / misc_s_ivcore
Number: 0x14c521cc (348463564)
Name: miscivcore_could_not_read_from_ file
Chapter 1. Tivoli Access Manager Base Messages
197
Severity: Notice
Component: mis / misc_s_ivcore
HPDMS0465E The write operation to the
configuration file %s failed with error
code %d.
HPDMS0461E Extract of entry %s from stanza %s in
configuration file %s failed
Explanation: The specified configuration file could not
be written to.
Explanation: The specified entry could not be found
in the specified stanza in the configuration file.
Action: Ensure that the user who invoked pdconf has
write permission on the configuration file.
Action: Ensure that the entry, stanza, and
configuration file have been specified correctly.
Name: misccore_write_failed
Name: misccore_extract_of_entry_failed
Number: 0x14c521cd (348463565)
Number: 0x14c521d1 (348463569)
Severity: Error
Component: mis / misc_s_ivcore
Severity: Error
Component: mis / misc_s_ivcore
HPDMS0466E Can not retrieve information from the
ldap.conf configuration file.
HPDMS0462E \tEntry does not exist
Explanation: Required information could not be read
from the %PD_HOME%\etc\ldap.conf file.
Explanation: The specified entry could not be found
in the specified stanza in the configuration file.
Action: Ensure that the entry, stanza, and
configuration file have been specified correctly.
Action: Ensure that the ldap.conf configuration file
exists and is not corrupted. If the file is missing or
corrupted, then unconfigure the Tivoli Access Manager
Runtime component and reconfigure.
Name: misccoreentry_does_not_exist
Name: misccore_can_t_retrieve_configuration_ re
Number: 0x14c521ce (348463566)
Number: 0x14c521d2 (348463570)
Severity: Error
Severity: Error
Component: mis / misc_s_ivcore
Component: mis / misc_s_ivcore
HPDMS0463E Extract of stanza %s from
configuration file %s failed
HPDMS0467I Server startup
Explanation: The specified stanza could not be found
in the configuration file.
Action: Ensure that the stanza and configuration file
have been specified correctly.
Name: misccore_extract_of_stanza_failed
Number: 0x14c521cf (348463567)
Explanation: The server is starting up.
Action: No action is required.
Name: misccore_server_startup
Number: 0x14c521d3 (348463571)
Severity: Notice
Component: mis / misc_s_ivcore
Severity: Error
Component: mis / misc_s_ivcore
HPDMS0468I Server ready
Explanation: The server is ready to service requests.
HPDMS0464I \tStanza does not exist
Explanation: The specified stanza could not be found
in the configuration file.
Action: Ensure that the stanza and configuration file
have been specified correctly.
Name: misccorestanza_does_not_exist
Number: 0x14c521d0 (348463568)
Severity: Notice
Component: mis / misc_s_ivcore
198
Error Message Reference
Action: No action is required.
Name: misccore_server_ready
Number: 0x14c521d4 (348463572)
Severity: Notice
Component: mis / misc_s_ivcore
HPDMS1700I Unknown entry type
Explanation: The ACL modify command requires an
ACL entry type of user, group, any-other, or
unauthenticated
Component: mis / misc_s_ivmgrd
HPDMS1780I Creating database
Explanation: This is an informational message.
Action: Specify a valid entry type
Action: No action is required.
Name: miscivmgrd_unknown_entry_type
Name: miscivmgrd_creating_database
Number: 0x14c526a4 (348464804)
Number: 0x14c526f4 (348464884)
Severity: Notice
Severity: Notice
Component: mis / misc_s_ivmgrd
Component: mis / misc_s_ivmgrd
HPDMS1728I Invalid network specified
HPDMS1785I Initialize client authorization
Explanation: The network parameter must have the
format %d.%d.%d.%d
Explanation: Initializing client authorization.
Action: Specify a valid network parameter
Name: miscivmgrd_invalid_network_ specified
Number: 0x14c526c0 (348464832)
Severity: Notice
Action: No action is required.
Name: miscivmgrd_initialise_client_ authorizati
Number: 0x14c526f9 (348464889)
Severity: Notice
Component: mis / misc_s_ivmgrd
Component: mis / misc_s_ivmgrd
HPDMS1791I Checking service parameters
HPDMS1729I Invalid netmask specified
Explanation: Checking service parameters
Explanation: The netmask parameter must have the
format %d.%d.%d.%d
Action: No action is required.
Action: Specify a valid netmask parameter
Name: miscivmgrd_checking_service_ parameters
Name: miscivmgrd_invalid_netmask_ specified
Number: 0x14c526ff (348464895)
Number: 0x14c526c1 (348464833)
Severity: Notice
Severity: Notice
Component: mis / misc_s_ivmgrd
Component: mis / misc_s_ivmgrd
HPDMS1925I ResourceName Size exceeded
HPDMS1778I Loading configuration
Explanation: The resource name cannot be longer than
115 characters
Explanation: The server configuration information is
being processed.
Action: Specify a shorter resource name
Action: No action is required.
Name: miscivmgrd_resname_size_exceeded
Name: miscivmgrd_loading_configuration
Number: 0x14c52785 (348465029)
Number: 0x14c526f2 (348464882)
Severity: Notice
Severity: Notice
Component: mis / misc_s_ivmgrd
Component: mis / misc_s_ivmgrd
HPDMS1779I Open database
Explanation: Opening database
Action: No action is required.
Name: miscivmgrd_open_database
Number: 0x14c526f3 (348464883)
HPDMS1926I Sign On ID size exceeded
Explanation: The sign-on ID cannot be longer than
256 characters
Action: Specify a shorter sign-on ID.
Name: miscivmgrd_signonid_size_exceeded
Number: 0x14c52786 (348465030)
Severity: Notice
Severity: Notice
Chapter 1. Tivoli Access Manager Base Messages
199
Component: mis / misc_s_ivmgrd
Name: miscivmgrd_invalid_qop
Number: 0x14c527b8 (348465080)
HPDMS1927I Sign On Password size exceeded
Explanation: The sign-on password cannot be longer
than 46 characters
Action: Specify a shorter sign-on password
Name: miscivmgrd_signonpwd_size_exceeded
Number: 0x14c52787 (348465031)
Severity: Notice
Component: mis / misc_s_ivmgrd
Severity: Notice
Component: mis / misc_s_ivmgrd
HPDMS1991I Invalid IP Address specified
Explanation: The network and/or netmask
argument(s) specified are not valid. They must be in
the format %d.%d.%d.%d
Action: Specify valid network and netmask arguments
Name: miscivmgrd_invalid_ip
HPDMS1928I Resource Group Name size exceeded
Number: 0x14c527c7 (348465095)
Explanation: The resource group name cannot be
longer than 115 characters
Severity: Notice
Component: mis / misc_s_ivmgrd
Action: Specify a shorter resource group name.
Name: miscivmgrd_resgrpname_size_ exceeded
HPDMS1992I Network specified already protected
Number: 0x14c52788 (348465032)
Explanation: The network specified is already present
in the IP endpoint authentication method attribute
(ipauth)
Severity: Notice
Component: mis / misc_s_ivmgrd
HPDMS1974I Invalid time of day specified
Explanation: See the Tivoli Access Manager Base
Administrator’s Guide for time-of-day syntax
information
Action: Specify a valid time of day argument
Action: Specify an alternate network to add to the IP
endpoint authentication method attribute
Name: miscivmgrd_network_already_ protected
Number: 0x14c527c8 (348465096)
Severity: Notice
Component: mis / misc_s_ivmgrd
Name: miscivmgrd_invalid_tod
Number: 0x14c527b6 (348465078)
Severity: Notice
Component: mis / misc_s_ivmgrd
HPDMS1975I Invalid audit level specified
Explanation: An audit level must be either all, none,
or some combination of permit, deny, and/or error
HPDMS1993I Network specified cannot be found
Explanation: The network specified is not in network
list of the IP endpoint authentication method attribute
(ipauth)
Action: Specify a network that is present in the
network list of the IP endpoint authentication method
attribute
Name: miscivmgrd_cannot_find_network
Action: Specify a valid audit level
Number: 0x14c527c9 (348465097)
Name: miscivmgrd_invalid_audit
Severity: Notice
Number: 0x14c527b7 (348465079)
Component: mis / misc_s_ivmgrd
Severity: Notice
Component: mis / misc_s_ivmgrd
HPDMS1976I Invalid quality of protection level
specified
Explanation: A quality of protection level must be one
of none, integrity, or privacy
Action: Specify a valid quality of protection level
200
Error Message Reference
HPDMS2400I Starting authorization service
Explanation: This is information on the progress of
the authorization client initialization.
Action: No action is required.
Name: misclibivacl_starting_authorization_ serv
Number: 0x14c52960 (348465504)
Severity: Notice
Component: mis / misc_s_libivacl
Name: miscivpolicy_zero_entered_error
Number: 0x14c52b60 (348466016)
HPDMS2402I Initializing replica database
Explanation: This is information on the progress of
the authorization client initialization.
Action: No action is required.
Name: misclibivacl_initialising_replica_ databa
Number: 0x14c52962 (348465506)
Severity: Notice
Component: mis / misc_s_ivpolicy
HPDMS4047E Non-local authentication (login) is
required to perform this operation
Component: mis / misc_s_libivacl
Explanation: For security reasons, most Tivoli Access
Manager administration operations require an
authenticated session with the Tivoli Access Manager
policy server.
HPDMS2801I Invalid command number
Action: Login using the ’login’ subcommand and retry
the operation. Do not use the login -l option.
Severity: Notice
Explanation: The value for this option must be an
integer
Action: Specify the value for this option as an integer
Name: miscivpolicy_invalid_command_value
Name: miscivmgrd_not_authenticated
Number: 0x14c52fcf (348467151)
Severity: Error
Component: mis / misc_s_ivadmin
Number: 0x14c52af1 (348465905)
Severity: Notice
Component: mis / misc_s_ivpolicy
HPDMS2806I Invalid command boolean value
Explanation: The value for this option must be
specified as a boolean. The valid boolean values are
true, false, yes, no, 1, 0, on, and off
Action: Specify a boolean value for this option
Name: miscivpolicy_invalid_command_bool
Number: 0x14c52af6 (348465910)
Severity: Notice
Component: mis / misc_s_ivpolicy
HPDMS4061E Local authentication (local login) is
required to perform this operation
Explanation: For security reasons, most Tivoli Access
Manager administration operations require an
authenticated session to perform local tasks.
Action: Login using the ’login -l’ subcommand and
retry the operation.
Name: miscivmgrd_not_local_authenticated
Number: 0x14c52fdd (348467165)
Severity: Error
Component: mis / misc_s_ivadmin
HPDMS2807I Invalid command time
HPDMS4067I The authentication_level value must
be entered as an integer or as
″forbidden″.
Explanation: This option must be specified as a time
value
Explanation: The value for authentication_level must
be an integer or ″forbidden″.
Action: Specify a time value for this option
Action: Specify the authentication_level value as an
integer or as ″forbidden″.
Name: miscivpolicy_invalid_command_time
Number: 0x14c52af7 (348465911)
Severity: Notice
Component: mis / misc_s_ivpolicy
Name: miscivadmin_nonnumeric_value
Number: 0x14c52fe3 (348467171)
Severity: Notice
Component: mis / misc_s_ivadmin
HPDMS2912I Valid integer values are 1 or greater.
Explanation: The value for this option must be an
integer greater than zero
Action: Specify the value for this option as an integer
greater than zero
HPDMS4068E The specified network IP address is
not in a valid IPv4 address format.
Explanation: The network IP address specified is not
in one of the industry standard formats permitted for
IPv4 addresses. See the IBM Tivoli Access Manager
Chapter 1. Tivoli Access Manager Base Messages
201
documentation for further information regarding IPv4
formats.
Action: Specify the address in a valid IPv4 format
Name: miscivadmin_popmodify_v4_net_ format
Number: 0x14c52fe4 (348467172)
alternative client platform to specify the IPv6 address.
Name: miscivadmin_popmodify_v6_mask_ format
Number: 0x14c52fe7 (348467175)
Severity: Error
Component: mis / misc_s_ivadmin
Severity: Error
Component: mis / misc_s_ivadmin
HPDMS4069E The specified netmask IP address is
not in a valid IPv4 address format.
Explanation: The netmask IP address specified is not
in one of the industry standard formats permitted for
IPv4 addresses. See the IBM Tivoli Access Manager
documentation for further information regarding IPv4
formats.
Action: Specify the address in a valid IPv4 format
HPDMS4072E The specified network and netmask
IP addresses must both be in IPv4 or
IPv6 address formats.
Explanation: The network IP address was specified in
IPv4 or IPv6 format and the netmask address was not
specified in the same format. Both IP addresses must be
specified in the same industry standard format for
either IPv4 or IPv6 addresses. See the IBM Tivoli Access
Manager documentation for further information
regarding IPv4 and IPv6 formats.
Name: miscivadmin_popmodify_v4_mask_ format
Action: Specify the network and netmask addresses
using the same IP address format.
Number: 0x14c52fe5 (348467173)
Name: miscivadmin_popmodify_mixed_v4_v6
Severity: Error
Number: 0x14c52fe8 (348467176)
Component: mis / misc_s_ivadmin
Severity: Error
Component: mis / misc_s_ivadmin
HPDMS4070E The specified network IP address is
not in a valid IPv6 address format.
Explanation: The network IP address specified is not
in one of the industry standard formats permitted for
IPv6 addresses. Alternatively, on Win2k clients, IPv6
addresses cannot be specified since IPv6 addresses are
not supported by this platform. See the IBM Tivoli
Access Manager documentation for further information
regarding IPv6 formats.
Action: Specify the IP address in a valid IPv6 format.
For Win2k clients, specify an IPv4 address or use an
alternative client platform to specify the IPv6 address.
Name: miscivadmin_popmodify_v6_net_ format
Number: 0x14c52fe6 (348467174)
HPDMS4073E The network or netmask IP address
was specified as zero.
Explanation: The network IP address or netmask IP
address was specified using zeros. See the IBM Tivoli
Access Manager documentation for further information
regarding IPv4 and IPv6 formats.
Action: Specify the network and netmask addresses as
valid, non-zero addresses.
Name: miscivadmin_popmodify_one_ip_zero
Number: 0x14c52fe9 (348467177)
Severity: Error
Component: mis / misc_s_ivadmin
Severity: Error
Component: mis / misc_s_ivadmin
HPDMS4074E The binary AND of network and
netmask addresses must be non-zero.
HPDMS4071E The specified netmask IP address is
not in a valid IPv6 address format.
Explanation: The network IP address and netmask IP
address are combined using a bitwise AND. The
resulting masked network address cannot be zero. See
the IBM Tivoli Access Manager documentation for
further information regarding IPv4 and IPv6 formats.
Explanation: The netmask IP address specified is not
in one of the industry standard formats permitted for
IPv6 addresses. Alternatively, on Win2k clients, IPv6
addresses cannot be specified since IPv6 addresses are
not supported by this platform. See the IBM Tivoli
Access Manager documentation for further information
regarding IPv6 formats.
Action: Specify the IP address in a valid IPv6 format.
For Win2k clients, specify an IPv4 address or use an
202
Error Message Reference
Action: Specify the network and netmask addresses
that do not result in a zero masked network when
combined.
Name: miscivadmin_popmodify_masked_zero
Number: 0x14c52fea (348467178)
Severity: Error
different user or a different ACL.
Component: mis / misc_s_ivadmin
Name: miscivmgrd_user_does_not_have_acl2
Number: 0x14c52fee (348467182)
HPDMS4075E Incorrect account-expiry-date.
Acceptable dates are between the
current date and 2035-12-31-23:59:59.
Explanation: The date specified was earlier than the
current date or greater than 2035-12-31-23:59:59.
Action: Specify an valid account-expiry-date for the
policy. Acceptable values can be the current date or
later but not greater than 2035-12-31-23:59:59
Severity: Error
Component: mis / misc_s_ivadmin
HPDMS4079E Group specified does not have an
entry in the ACL specified.
Explanation: The group specified does not exist for
the ACL specified.
Name: miscivpolicy_invalid_command_date2
Action: Specify a different group or a different ACL.
Number: 0x14c52feb (348467179)
Name: miscivmgrd_group_does_not_have_ acl2
Severity: Error
Number: 0x14c52fef (348467183)
Component: mis / misc_s_ivadmin
Severity: Error
Component: mis / misc_s_ivadmin
HPDMS4076E Incorrect max-return value specified.
Use a value that is greater than or equal
to zero. Use zero to return all found.
Explanation: The max-return value that was specified
was not an integer equal to or greater than 0.
HPDMS4080W The any-other entry does not exist for
the ACL specified.
Explanation: See message.
Action: Specify a valid integer value for the
max-return argument. Use a value that is greater than
or equal to 0. Use zero to return all entries that are
found.
Action: No action required.
Name: miscivadmin_invalid_maxreturn2
Severity: Warning
Number: 0x14c52fec (348467180)
Component: mis / misc_s_ivadmin
Severity: Error
Component: mis / misc_s_ivadmin
HPDMS4077E Name cannot begin with a space
character.
Name: miscivmgrd_no_anyther_entry_ in_acl2
Number: 0x14c52ff0 (348467184)
HPDMS4081W The unauthenticated entry does not
exist for the ACL specified.
Explanation: See message.
Action: No action required.
Explanation: The first character of the name was a
space character.
Name: miscivmgrd_no_unauthenticated_acl2
Action: Specify a valid name without leading space
characters. For string names, ensure there are no space
characters after the opening quotation mark.
Severity: Warning
Name: miscivmgrd_leading_blank2
Number: 0x14c52fed (348467181)
Severity: Error
Component: mis / misc_s_ivadmin
HPDMS4078E User specified does not have an entry
in the ACL specified.
Explanation: The user specified does not exist for the
ACL specified.
Action: No action required. If desired, specify a
Number: 0x14c52ff1 (348467185)
Component: mis / misc_s_ivadmin
HPDMS4082E ACL name contains characters that are
not allowed.
Explanation: The ACL name specified contains one or
more characters that are not allowed in ACL names.
Action: Specify an ACL name that contains valid
characters. For information about characters that are
valid in ACL names, see the ″IBM Tivoli Access
Manager Administration Guide″.
Name: miscivmgrd_invalid_acl_name2
Number: 0x14c52ff2 (348467186)
Chapter 1. Tivoli Access Manager Base Messages
203
Severity: Error
Component: mis / misc_s_ivadmin
HPDPZ0001E Exception: %s File: ″%s″ %d Error: %d
No text has been defined for this
exception.
HPDMS4083E Value for the ’type’ option is not an
integer greater than or equal to zero.
Explanation: An exception was caught that has no
appropriate text to display. This is an internal error.
Explanation: See message.
Action: Report this message to your IBM service
representative.
Action: Specify an integer value that greater than or
equal to zero.
Name: zerror_unmapped_zzexception
Name: miscobject_invalid_object_type2
Number: 0x35e51001 (904204289)
Number: 0x14c52ff3 (348467187)
Severity: Fatal
Severity: Error
Component: pdz / pdz_s_general
Component: mis / misc_s_ivadmin
HPDPZ0002E Memory allocation failure.
HPDMS4084E Value for the ’ispolicyattachable’
option is not a valid Boolean value.
Explanation: See message.
Action: Specify a valid Boolean value. Acceptable
values are ’yes’,’no’,’true’,’false’,’1’,’0’, ’on’, or ’off’.
Name: miscobject_invalid_ispolicyattachable_ param2
Number: 0x14c52ff4 (348467188)
Severity: Error
Component: mis / misc_s_ivadmin
Explanation: A request to allocate memory failed.
Action: Ensure that sufficient disk space and memory
are available in the system. If restarting the server does
not resolve the problem, contact your IBM service
representative.
Name: zerror_out_of_memory
Number: 0x35e51002 (904204290)
Severity: Fatal
Component: pdz / pdz_s_general
Explanation: See message.
HPDPZ0003E Unexpected error opening XPG4
converter for codepage %s to %s
conversion. The iconv_open error code
is %d.
Action: Specify an integer value greater than or equal
to zero.
Explanation: The required codepage tables could not
be located.
Name: miscivpolicy_zero_or_greater_error
Number: 0x14c52ff5 (348467189)
Action: On the Windows platforms, ensure that
LOCPATH and LANG environment variables are set
correctly.
Severity: Error
Name: zerror_iconv_open
Component: mis / misc_s_ivadmin
Number: 0x35e51003 (904204291)
HPDMS4085E Value is not an integer greater than or
equal to zero.
HPDMS4086E Value specified for option ’rsrctype’ is
not ’web’ or ’group’.
Explanation: See message.
Severity: Fatal
Component: pdz / pdz_s_general
Action: Specify a valid value for the rsrctype
parameter. Valid values include ’web’ and ’group’.
HPDPZ0004E Unexpected error from
pthread_mutex_init(). The error code is
%d.
Name: miscivmgrd_rescr_invalid_rtype2
Explanation: An internal coding error has occurred.
Number: 0x14c52ff6 (348467190)
Severity: Error
Action: This is an internal error. Contact your IBM
service representative.
Component: mis / misc_s_ivadmin
Name: zerror_mutex_init
Number: 0x35e51004 (904204292)
Severity: Fatal
204
Error Message Reference
Component: pdz / pdz_s_general
HPDPZ0005E Unexpected error from
pthread_mutex_destroy(). The error code
is %d.
HPDPZ0009E Unexpected error from
pthread_cond_destroy(). The error code
is %d.
Explanation: An internal coding error has occurred.
Explanation: An internal coding error has occurred.
Action: This is an internal error. Contact your IBM
service representative.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_condition_destroy
Name: zerror_mutex_destroy
Number: 0x35e51005 (904204293)
Severity: Fatal
Component: pdz / pdz_s_general
HPDPZ0006E Unexpected error from
pthread_mutex_lock(). The error code is
%d.
Number: 0x35e51009 (904204297)
Severity: Fatal
Component: pdz / pdz_s_general
HPDPZ0010E Unexpected error from
pthread_cond_wait(). The error code is
%d.
Explanation: An internal coding error has occurred.
Explanation: An internal coding error has occurred.
Action: This is an internal error. Contact your IBM
service representative.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_condition_wait
Name: zerror_mutex_lock
Number: 0x35e51006 (904204294)
Severity: Fatal
Component: pdz / pdz_s_general
HPDPZ0007E Unexpected error from
pthread_mutex_unlock(). The error code
is %d.
Number: 0x35e5100a (904204298)
Severity: Fatal
Component: pdz / pdz_s_general
HPDPZ0011E Unexpected error from
pthread_cond_signal(). The error code is
%d.
Explanation: An internal coding error has occurred.
Explanation: An internal coding error has occurred.
Action: This is an internal error. Contact your IBM
service representative.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_condition_signal
Name: zerror_mutex_unlock
Number: 0x35e51007 (904204295)
Severity: Fatal
Component: pdz / pdz_s_general
Number: 0x35e5100b (904204299)
Severity: Fatal
Component: pdz / pdz_s_general
HPDPZ0012E This function is not supported on this
platform.
HPDPZ0008E Unexpected error from
pthread_cond_init(). The error code is
%d.
Explanation: An attempt was made to use an API that
is not supported on the current operating system.
Explanation: An internal coding error has occurred.
Action: This is an internal error. Contact your IBM
service representative.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_invalid_platform
Name: zerror_condition_init
Number: 0x35e51008 (904204296)
Severity: Fatal
Number: 0x35e5100c (904204300)
Severity: Fatal
Component: pdz / pdz_s_general
Component: pdz / pdz_s_general
Chapter 1. Tivoli Access Manager Base Messages
205
HPDPZ0013E Unexpected error from Windows
RegOpenKeyEx(). Opening of the
registry key %s failed with error %s.
HPDPZ0017E Unexpected error from
pthread_attr_setdetachstate(). The error
code is %d.
Explanation: An attempt to open a Windows registry
key has failed.
Explanation: An internal coding error has occurred.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_regopenkeyex
Number: 0x35e5100d (904204301)
Severity: Fatal
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_attr_setdetachstate
Number: 0x35e51011 (904204305)
Severity: Fatal
Component: pdz / pdz_s_general
Component: pdz / pdz_s_general
HPDPZ0014E Unexpected error from Windows
RegQueryValueEx(). Reading of the
value %s failed with error %s.
Explanation: An attempt to read a value from a
Windows registry key has failed.
Action: This is an internal error. Contact your IBM
service representative.
HPDPZ0018E Unexpected error from
pthread_create(). The error code is %d.
Explanation: An internal coding error has occurred.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_create_thread
Number: 0x35e51012 (904204306)
Name: zerror_regqueryvalueex
Severity: Fatal
Number: 0x35e5100e (904204302)
Component: pdz / pdz_s_general
Severity: Fatal
Component: pdz / pdz_s_general
HPDPZ0015E Object is not cloneable.
Explanation: An internal coding error has occurred.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_not_clonable
Number: 0x35e5100f (904204303)
Severity: Fatal
HPDPZ0019E Unexpected error from
pthread_attr_destroy(). The error code is
%d.
Explanation: An internal coding error has occurred.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_attr_destroy
Number: 0x35e51013 (904204307)
Severity: Fatal
Component: pdz / pdz_s_general
Component: pdz / pdz_s_general
HPDPZ0016E Unexpected error from
pthread_attr_init(). The error code is %d.
Explanation: An internal coding error has occurred.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_attr_init
Number: 0x35e51010 (904204304)
Severity: Fatal
Component: pdz / pdz_s_general
206
Error Message Reference
HPDPZ0020E An unknown exception was caught.
No exception information is available.
Explanation: An internal coding error has occurred.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_unknown_exception
Number: 0x35e51014 (904204308)
Severity: Fatal
Component: pdz / pdz_s_general
HPDPZ0021E Unexpected error from pthread_join().
The error code is %d.
HPDPZ0025E Unexpected error from gethostname().
The error code is %d.
Explanation: An internal coding error has occurred.
Explanation: An internal coding error has occurred.
Action: This is an internal error. Contact your IBM
service representative.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_join_thread
Name: zerror_gethostname
Number: 0x35e51015 (904204309)
Number: 0x35e51019 (904204313)
Severity: Fatal
Severity: Fatal
Component: pdz / pdz_s_general
Component: pdz / pdz_s_general
HPDPZ0022E Unexpected error from
pthread_cond_timedwait(). The error
code is %d.
HPDPZ0026E Unexpected error from
gethostbyname(). The error code is %d.
Explanation: An internal coding error has occurred.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_condition_timedwait
Number: 0x35e51016 (904204310)
Severity: Fatal
Explanation: An internal coding error has occurred.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_gethostbyname
Number: 0x35e5101a (904204314)
Severity: Fatal
Component: pdz / pdz_s_general
Component: pdz / pdz_s_general
HPDPZ0023E A function or method was called with
an invalid parameter.
HPDPZ0027E Unexpected error from
pthread_cond_broadcast(). The error
code is %d.
Explanation: An internal coding error has occurred.
Explanation: An internal coding error has occurred.
Action: This is an internal error. Contact your IBM
service representative.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_invalid_parameter
Name: zerror_condition_broadcast
Number: 0x35e51017 (904204311)
Number: 0x35e5101b (904204315)
Severity: Fatal
Severity: Fatal
Component: pdz / pdz_s_general
Component: pdz / pdz_s_general
HPDPZ0024E Unexpected error from WSAStartup().
The error code is %d.
HPDPZ0028E The configuration file %s is missing
the required attribute %s in stanza %s.
Explanation: An internal coding error has occurred.
Explanation: A required attribute is missing probably
because the configuration file is damaged or was
modified incorrectly.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_wsastartup
Number: 0x35e51018 (904204312)
Severity: Fatal
Component: pdz / pdz_s_general
Action: Provide a valid value for the attribute or
reconfigure the application.
Name: zerror_missing_properties
Number: 0x35e5101c (904204316)
Severity: Fatal
Component: pdz / pdz_s_general
Chapter 1. Tivoli Access Manager Base Messages
207
HPDPZ0029E Unexpected error from
pthread_key_create(). The error code is
%d.
HPDPZ0033E An unexpected error was received
when trying to obtain a process lock.
The error code is %d.
Explanation: An internal coding error has occurred.
Explanation: An internal coding error has occurred.
Action: This is an internal error. Contact your IBM
service representative.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_key_create
Name: zerror_process_lock
Number: 0x35e5101d (904204317)
Number: 0x35e51021 (904204321)
Severity: Fatal
Severity: Fatal
Component: pdz / pdz_s_general
Component: pdz / pdz_s_general
HPDPZ0030E Unexpected error from
pthread_setspecific(). The error code is
%d.
HPDPZ0034E An unexpected error was received
when trying to release a process lock.
The error code is %d.
Explanation: An internal coding error has occurred.
Explanation: An internal coding error has occurred.
Action: This is an internal error. Contact your IBM
service representative.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_key_set
Name: zerror_process_unlock
Number: 0x35e5101e (904204318)
Number: 0x35e51022 (904204322)
Severity: Fatal
Severity: Fatal
Component: pdz / pdz_s_general
Component: pdz / pdz_s_general
HPDPZ0031E The requested function is not
implemented.
HPDPZ0035E A read operation failed for a process
lock. The error code is %d.
Explanation: An attempt was made to use an API that
is not implemented.
Explanation: An internal coding error has occurred.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_not_implemented
Number: 0x35e5101f (904204319)
Severity: Fatal
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_process_read
Number: 0x35e51023 (904204323)
Severity: Fatal
Component: pdz / pdz_s_general
Component: pdz / pdz_s_general
HPDPZ0032E An unexpected lock state was detected.
The current lock state is %s.
Explanation: An internal coding error has occurred.
The current state of the resource lock is not valid for
the requested operation.
Action: This is an internal error. Contact your IBM
service representative.
HPDPZ0036E A write operation failed for a process
lock. The error code is %d.
Explanation: An internal coding error has occurred.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_process_write
Number: 0x35e51024 (904204324)
Name: zerror_invalid_lock_state
Severity: Fatal
Number: 0x35e51020 (904204320)
Component: pdz / pdz_s_general
Severity: Fatal
Component: pdz / pdz_s_general
208
Error Message Reference
HPDPZ0037E A create operation failed for a process
lock. The error code is %d and the lock
file name is %s.
HPDPZ0041E The configuration file %s has an
invalid boolean value %s for key %s in
stanza %s.
Explanation: An internal coding error has occurred.
Explanation: A boolean attribute has an invalid value.
The configuration file might be damaged or was
modified incorrectly.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_process_create
Number: 0x35e51025 (904204325)
Severity: Fatal
Component: pdz / pdz_s_general
HPDPZ0038E A close operation failed for a process
lock. The error code is %d and the lock
file name is %s.
Explanation: An internal coding error has occurred.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_process_close
Number: 0x35e51026 (904204326)
Severity: Fatal
Component: pdz / pdz_s_general
HPDPZ0039E The configuration file %s has an
invalid value %s for key %s in stanza
%s.
Explanation: An attribute value is incorrect.
Action: Provide a valid value or reconfigure the
application.
Name: zerror_invalid_properties
Number: 0x35e51027 (904204327)
Action: Provide a valid value or reconfigure the
application.
Name: zerror_properties_inv_boolvalue
Number: 0x35e51029 (904204329)
Severity: Fatal
Component: pdz / pdz_s_general
HPDPZ0042E The iterator for configuration file %s is
in an invalid state for the operation.
Explanation: The current state of the iterator does not
permit the attempted access.
Action: This is an internal error. Contact your IBM
service representative.
Name: zerror_properties_iterator
Number: 0x35e5102a (904204330)
Severity: Fatal
Component: pdz / pdz_s_general
HPDPZ0043E An access function failed for
configuration file %s. The access
function was %s and return code was
%d.
Explanation: An Input/Output operation could not be
performed on a configuration file. The daemon process
might not have proper permissions to access the file.
Severity: Fatal
Action: Ensure that the file and directory permissions
permit program access to the file.
Component: pdz / pdz_s_general
Name: zerror_properties_ioerror
HPDPZ0040E The configuration file %s has an
invalid numeric value %s for key %s in
stanza %s.
Explanation: A numeric attribute has a non-numeric
value. The configuration file might be damaged or was
modified incorrectly.
Action: Provide a valid value or reconfigure the
application.
Name: zerror_properties_inv_numvalue
Number: 0x35e51028 (904204328)
Severity: Fatal
Component: pdz / pdz_s_general
Number: 0x35e5102b (904204331)
Severity: Fatal
Component: pdz / pdz_s_general
HPDPZ0044E The configuration file ″%s″ contains
invalid data at line %d. Data: ″%s″.
Explanation: The specified configuration file contains
valid data. This might be caused by a duplicate stanza
name in the file.
Action: Correct the invalid data or reconfigure the
application.
Name: zerror_properties_filedata
Number: 0x35e5102c (904204332)
Chapter 1. Tivoli Access Manager Base Messages
209
Severity: Fatal
Component: pdz / pdz_s_general
HPDPZ0049E A string could not be converted from
the local codeset ″%s″ to UTF-8.
Explanation: An internal error has occurred.
HPDPZ0045E The TISDIR environment variable is
not set.
Explanation: The TISDIR environment variable was
not available to the application.
Action: Contact your IBM service representative.
Name: zerror_convert_toutf8
Number: 0x35e51031 (904204337)
Action: Ensure that application is properly configured.
Severity: Fatal
Name: zerror_no_tis_env
Component: pdz / pdz_s_general
Number: 0x35e5102d (904204333)
Severity: Fatal
Component: pdz / pdz_s_general
HPDPZ0046E The tis_mblen() function failed.
Probable cause is an invalid multi-byte
character.
Explanation: The function returned -1 if it could not
determine the length of the multibyte character.
Action: Report this error to your IBM service
representative.
Name: zerror_tis_mblen
HPDPZ0050E A string could not be converted from
UTF-8 to the local codeset ″%s″.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: zerror_convert_fromutf8
Number: 0x35e51032 (904204338)
Severity: Fatal
Component: pdz / pdz_s_general
HPDPZ0051E Shared Library error (%s) %d. %s
Severity: Fatal
Explanation: An error occured loading or unloading a
shared library. Verify installation, permissions and path
settings to ensure that the library can be located.
Component: pdz / pdz_s_general
Action: Contact your IBM service representative.
Number: 0x35e5102e (904204334)
HPDPZ0047E The handle for codeset ″%s″ could not
be created. The TISDIR environment
variable is ″%s″.
Name: zerror_shared_lib_load
Number: 0x35e51033 (904204339)
Severity: Fatal
Explanation: The function failed. The TISDIR,
LC_CODE or LANG might not be correct.
Component: pdz / pdz_s_general
Action: Verify that the product is properly installed
and configured.
HPDPZ0052E Shared Library resolve error (%s:%s)
%d. %s
Name: zerror_cs_handle
Explanation: An error occured resolving a symbol in a
shared library. Verify installation to determine that the
correct library is being loaded.
Number: 0x35e5102f (904204335)
Severity: Fatal
Component: pdz / pdz_s_general
HPDPZ0048E The function or operation is not
supported.
Explanation: An internal error has occurred.
Action: Contact your IBM service representative.
Name: zerror_shared_lib_resolve
Number: 0x35e51034 (904204340)
Severity: Fatal
Component: pdz / pdz_s_general
Action: Contact your IBM service representative.
Name: zerror_not_supported
Number: 0x35e51030 (904204336)
Severity: Fatal
Component: pdz / pdz_s_general
210
Error Message Reference
HPDPZ0053E Unexpected end of file encounted
while reading %s.
Explanation: An end of file character was
unexpectedly encountered while reading a file. Verify
that the file is valid.
Action: Contact your IBM service representative.
Name: zerror_unexpected_eof
Number: 0x35e51035 (904204341)
Severity: Error
Component: pdz / pdz_s_general
HPDPZ0054E Internal error encountered while
loading Java property file %s.
Explanation: An internal state error was encountered
while loading a Java property file. The file was not
loaded.
Action: Contact your IBM service representative.
Name: zerror_javaprop_parse
Number: 0x35e51036 (904204342)
Severity: Error
Component: pdz / pdz_s_general
HPDRA0004E Component already exists.
Explanation: An internal error occurred.
Action: Contact your IBM service representative.
Name: pd_trace_s_component_already_ exists
Number: 0x308fa004 (814718980)
Severity: Error
Component: brs / pd_ras_s_trace
HPDRA0005E Component not found.
Explanation: The specified trace component is not a
known component.
Action: Retry the operation specifying a valid
component.
Name: pd_trace_s_component_not_found
Number: 0x308fa005 (814718981)
Severity: Error
HPDRA0001E Trace is not initialized.
Component: brs / pd_ras_s_trace
Explanation: An internal error occurred.
Action: Contact your IBM service representative.
Name: pd_trace_s_not_initialized
Number: 0x308fa001 (814718977)
Severity: Error
Component: brs / pd_ras_s_trace
HPDRA0006E Component handle is invalid.
Explanation: An internal error occurred.
Action: Contact your IBM service representative.
Name: pd_trace_s_invalid_component_hdl
Number: 0x308fa006 (814718982)
Severity: Error
HPDRA0002E Trace initialization failed.
Component: brs / pd_ras_s_trace
Explanation: An internal error occurred.
Action: Contact your IBM service representative.
Name: pd_trace_s_init_failed
Number: 0x308fa002 (814718978)
Severity: Error
Component: brs / pd_ras_s_trace
HPDRA0003I Trace is already initialized.
Explanation: Trace initialized more than once. This is
not an error condition.
Action: No action is required.
Name: pd_trace_s_already_initialized
Number: 0x308fa003 (814718979)
HPDRA0007E Trace level is invalid.
Explanation: An invalid trace level has been specified.
Action: Specify a valid trace level and retry the
operation.
Name: pd_trace_s_invalid_trace_lvl
Number: 0x308fa007 (814718983)
Severity: Error
Component: brs / pd_ras_s_trace
HPDRA0008E Component name is invalid.
Explanation: The specified component name does not
conform to the rules for a valid component name.
Severity: Notice
Action: Specify a valid component name and contact
your IBM service representative if the problem persists.
Component: brs / pd_ras_s_trace
Name: pd_trace_s_invalid_component_name
Number: 0x308fa008 (814718984)
Severity: Error
Chapter 1. Tivoli Access Manager Base Messages
211
Component: brs / pd_ras_s_trace
HPDRA0010E The specified destination is invalid.
Explanation: The log agent specified is invalid.
Action: Specify a valid log agent and retry the
operation.
Name: pd_trace_s_bad_destination
Number: 0x308fa00a (814718986)
Severity: Error
HPDRA0066E The requested task does not exist.
Explanation: A task name was specified that is not
handled by this server.
Action: Specify a valid task name and retry the
operation.
Name: trace_admin_error_task_not_found
Number: 0x308fa042 (814719042)
Severity: Error
Component: brs / pd_ras_s_trace
Component: brs / pd_ras_s_trace
HPDRA0011W Serviceability component ″%s″ could
not be registered for dynamic trace:
0x%x: %s
Explanation: A serviceability component could not be
registered for dynamic trace for the reason indicated.
This condition is benign and does not stop operation of
the product however trace points for the identified
component can not be activated dynamically.
Action: Contact your IBM service representative.
Name: pd_trace_m_bad_component
Number: 0x308fa00b (814718987)
Severity: Warning
Component: brs / pd_ras_s_trace
HPDRA0068E The specified destination (%s) is
invalid.
Explanation: The log agent specified is invalid.
Action: Correct the log agent specification and retry
the operation.
Name: trace_admin_bad_destination
Number: 0x308fa044 (814719044)
Severity: Error
Component: brs / pd_ras_s_trace
HPDRA0128I Logging commenced.
Explanation: Trace logging for the identified
component has commenced.
Action: No action is required.
HPDRA0064E Unable to perform requested task:
0x%x: %s
Explanation: The task could not be performed for the
indicated reason.
Name: trace_msg_commenced
Number: 0x308fa080 (814719104)
Severity: Notice
Action: Correct the problem indicated and retry the
operation.
Component: brs / pd_ras_s_trace
Name: trace_admin_error_task_failure
HPDRA0129I Logging ceased.
Number: 0x308fa040 (814719040)
Explanation: Trace logging for the identified
component has ceased.
Severity: Error
Component: brs / pd_ras_s_trace
Action: No action is required.
Name: trace_msg_ceased
HPDRA0065E The requested task is incomplete or
malformed.
Explanation: The task command is badly formed.
Action: Specify a valid task command and retry the
operation.
Number: 0x308fa081 (814719105)
Severity: Notice
Component: brs / pd_ras_s_trace
Name: trace_admin_error_bad_cmd
HPDRA0192E Statistics gathering is already
registered for this component.
Number: 0x308fa041 (814719041)
Explanation: An internal error occurred.
Severity: Error
Action: Contact your IBM service representative.
Component: brs / pd_ras_s_trace
Name: pd_trace_s_stats_already_registered_
212
Error Message Reference
Number: 0x308fa0c0 (814719168)
Severity: Error
HPDRA0197E The structure containing statistics
gathering functions is invalid.
Component: brs / pd_ras_s_trace
Explanation: An internal error occurred.
Action: Contact your IBM service representative.
HPDRA0193E Statistics gathering is not registered
for this component.
Explanation: No statistics gathering capability is
available for the specified component.
Name: pd_trace_s_invalid_stats_struct
Number: 0x308fa0c5 (814719173)
Severity: Fatal
Action: Only specify components with statistics
capabilities with statistics tasks.
Component: brs / pd_ras_s_trace
Name: pd_trace_s_stats_not_registered
HPDRA0256I Record: %s
Number: 0x308fa0c1 (814719169)
Explanation: The default string statistic format. This
format is used when the statistics monitor cannot
resolve the format string specified by the component
reporting the statistic from the message catalogs.
Severity: Error
Component: brs / pd_ras_s_trace
Action: No action is required.
HPDRA0194E Statistics gathering for this component
is already on.
Explanation: An internal error occurred.
Action: Contact your IBM service representative.
Name: pd_trace_s_stats_already_on
Number: 0x308fa0c2 (814719170)
Severity: Error
Component: brs / pd_ras_s_trace
HPDRA0195E Statistics gathering for this component
is always on.
Name: trace_stats_default_format_string
Number: 0x308fa100 (814719232)
Severity: Notice
Component: brs / pd_ras_s_trace
HPDRA0257I Record: %ld
Explanation: The default integer statistic format. This
format is used when the statistics monitor cannot
resolve the format string specified by the component
reporting the statistic from the message catalogs.
Action: No action is required.
Explanation: An internal error occurred.
Name: trace_stats_default_format_long
Action: Contact your IBM service representative.
Number: 0x308fa101 (814719233)
Name: pd_trace_s_stats_always_on
Severity: Notice
Number: 0x308fa0c3 (814719171)
Component: brs / pd_ras_s_trace
Severity: Error
Component: brs / pd_ras_s_trace
HPDRA0258I Record: %f
Explanation: An internal error occurred.
Explanation: The default floating point statistic
format. This format is used when the statistics monitor
cannot resolve the format string specified by the
component reporting the statistic from the message
catalogs.
Action: Contact your IBM service representative.
Action: No action is required.
Name: pd_trace_s_stats_not_on
Name: trace_stats_default_format_double
Number: 0x308fa0c4 (814719172)
Number: 0x308fa102 (814719234)
Severity: Error
Severity: Notice
Component: brs / pd_ras_s_trace
Component: brs / pd_ras_s_trace
HPDRA0196E Statistics gathering for this component
is not on.
Chapter 1. Tivoli Access Manager Base Messages
213
HPDRA0384I %ld components reporting statistics
Explanation: Statistics subsystem statistic: Number of
components reporting statistics.
Action: No action is required.
Name: pd_ras_m_n_components_format
HPDRG0100E The operation in the Active Directory
registry for %s failed with return error
%lx.
Explanation: An unknown Active Directory user
registry error has occurred.
Number: 0x308fa180 (814719360)
Action: Retry the failing operation. If the problem
persists, contact your IBM service representative.
Severity: Notice
Name: rgy_s_ad_unexpected_error
Component: brs / pd_ras_s_stats_monitor
Number: 0x16b48064 (380928100)
Severity: Error
HPDRA0385I %ld reports generated
Explanation: Statistics subsystem statistic: Number of
generated statistics reports.
Action: No action is required.
Name: pd_ras_m_n_reports_format
Number: 0x308fa181 (814719361)
Severity: Notice
Component: brs / pd_ras_s_stats_monitor
HPDRA0386I %s statistics report (partial period
commencing %s)
Explanation: Periodic statistics reports are generated
on an even period, such as every hour or half hour,
according to the period of the report specified. When
statistics are initially enabled a report is generated
reporting statistics gathered for an incomplete period.
This incomplete period is from the time the statistics
were enabled until the first even period.
Action: No action is required.
Name: pd_ras_m_partial_report
Number: 0x308fa182 (814719362)
Severity: Notice
Component: brs / pd_ras_s_stats_monitor
HPDRA0387I %s statistics report
Component: rgy / rgy_s_ad
HPDRG0101E The user password violates the Active
Directory user password policies.
Explanation: Make sure that the specified password
conforms to the password policies and/or complexity
requirements of the Active Directory domain controller.
Contact your IBM representative for further help.
Action: This password may violate one of the Active
Directory general password policies or the password
complexity requirements.
Name: rgy_s_ad_registry_violate_password_ policy
Number: 0x16b48065 (380928101)
Severity: Error
Component: rgy / rgy_s_ad
HPDRG0102E An invalid user name or distinguished
name (DN) was presented to Access
Manager. The user name or DN may
contain incorrect information, invalid
characters or violates a registry user
name limitation.
Explanation: If Tivoli Access Manager is configured
using Active Directory multiple domains, the username
or distinguished name may belong to different domains
or the domain suffix doesn’t exist or is unreachable.
Action: No action is required.
Action: Check the user name and DN information and
try again. For Active Directory user registry, note that a
″.″ as the 20th character of the user name is not
allowed.
Name: pd_ras_m_full_report
Name: rgy_s_ad_registry_invalid_username
Number: 0x308fa183 (814719363)
Number: 0x16b48066 (380928102)
Severity: Notice
Severity: Error
Component: brs / pd_ras_s_stats_monitor
Component: rgy / rgy_s_ad
Explanation: This is the statistics report header.
214
Error Message Reference
HPDRG0103E The specified group is a dynamic
group and dynamic group membership
cannot be modified.
Component: rgy / rgy_s_ad
HPDRG0106I LDAP Client using FIPS mode
Explanation: Use the tools or utilities provided with
the Microsoft Active Directory server product to
manage a dynamic group.
Explanation: Informational message.
Action: The specified group is a dynamic group in
which its membership is determined by its LDAP
query filter . Tivoli Access Manager can use dynamic
groups but cannot create or manage them. Use the tools
or utilities provided with the directory server product
to manage the group.
Name: rgy_ldap_client_in_fips_mode
Name: rgy_s_ad_cant_change_dynamic_
group_membership
HPDRG0107E The value of the userPrincipalName
in the Active Directory registry is not
unique. Duplicate userPrincipalName
values are not allowed to be used for
the Access Manager user or policy ID.
Number: 0x16b48067 (380928103)
Severity: Error
Component: rgy / rgy_s_ad
Action: No Action Required
Number: 0x16b4806a (380928106)
Severity: Notice
Component: rgy / rgy_s_ad
HPDRG0104E The specified group is a registry
dynamic group and Tivoli Access
Manager dynamic group support is not
enabled.
Explanation: There may exist more than one user in
the registry with the same userPrincipalName. Tivoli
Access Manager requires the userPrincipalName
attribute of the registry user object to be unique,
otherwise it can cause unexpected results for Tivoli
Access Manager operations.
Explanation: Must enable dynamic group support in
Tivoli Access Manager in order to use registry dynamic
group.
Action: Duplication of the userPrincipalName must be
resolved before using it as an object ID in Tivoli Access
Manager or choose a different object ID.
Action: Use the padmin command to modify the
configuration file to enable dyanmic group support.
Restart server service and retry.
Name: rgy_s_ad_duplicate_upn_entry
Name: rgy_s_ad_dynamic_group_not_enabled
Number: 0x16b48068 (380928104)
Severity: Error
Component: rgy / rgy_s_ad
HPDRG0105W Unable to remove Tivoli Access
Manager meta data from Active
Directory domain %s. Either the data
doesn’t exist in the Active Directory
domain or this domain can not be
contacted.
Explanation: Either the Active Directory domain is no
longer existed or is unreachable or the data doesn’t
exist in the specified Active Directory domain.
Action: To ensure that no Tivoli Access Manager data
is left behind after it is unconfigured, manually delete
the Tivoli Access Manager data from the domain once
it’s available. Contact your IBM service representative
for further help.
Name: rgy_s_ad_cant_delete_ad_domain_ data
Number: 0x16b4806b (380928107)
Severity: Error
Component: rgy / rgy_s_ad
HPDRG0108E The Active Directory Global Catalog
server may be down or unreachable.
The Global Catalog is required to be up
and reachable from the Tivoli Access
Manager configured Active Directory
domain.
Explanation: The Global Catalog server may be down
or unreachable by the Tivoli Access Manager
configured Active Directory Domain.
Action: Ensure the Global Catalog server is up and/or
check the firewall to ensure connections between the
Global Catalog server and the Active Directory
domain/client are allowed.
Name: rgy_s_ad_global_catalog_unavailable_
Number: 0x16b4806c (380928108)
Severity: Error
Component: rgy / rgy_s_ad
Number: 0x16b48069 (380928105)
Severity: Warning
Chapter 1. Tivoli Access Manager Base Messages
215
HPDRG0109W Unable to migrate user %s to the
alternate userPrincipalName/e-mail
format. Microsoft Active Directory
Registry error: 0x%x.
Explanation: Unable to modify registry data for the
user. Tivoli Access Manager blade server identity might
not have the privilege to modify registry user data.
Action: Make sure the Tivoli Access Manager blade
server identity has the administrative privilege to
modify user if it’s desired and the Microsoft returned
error is access denial. Otherwise, migration is done at a
later time.
Name: rgy_s_ad_upn_migrate_user_fail
Number: 0x16b4806d (380928109)
Severity: Warning
Component: rgy / rgy_s_ad
Number: 0x16b48097 (380928151)
Severity: Error
Component: rgy / rgy_s_ad_ldap
HPDRG0152W Unable to contact the Policy Server to
create the registry handle. The Policy
Server may be down.
Explanation: Blade Servers that use a LDAP client to
communicate with Active Directory servers require the
Policy Server to be up in order to perform the registry
write operation. The Policy Server may currently be
down.
Action: Make sure that the Policy Server is up and
running. Contact your IBM service representative for
further help.
Name: rgy_s_ad_ldap_cant_create_ivadmin_ context
Number: 0x16b48098 (380928152)
HPDRG0110I Successfully migrated user %s to the
alternate userPrincipalName/e-mail
format.
Explanation: Informational message.
Action: No Action Required
Name: rgy_s_ad_upn_migrate_user_success
Number: 0x16b4806e (380928110)
Severity: Notice
Component: rgy / rgy_s_ad
HPDRG0150E The registry object could not be
found.
Explanation: See message.
Action: Change the supplied DN to that of an existing
registry object.
Name: rgy_s_ad_ldap_object_notfound
Number: 0x16b48096 (380928150)
Severity: Error
Component: rgy / rgy_s_ad_ldap
HPDRG0151E Unable to load the IBM Directory
client library.
Explanation: Tivoli Access Manager could not be able
to locate and dynamically load the IBM Directory client
library in order to use the LDAP client to communicate
with the Microsoft Active Directory server.
Action: Ensure that the IBM Directory client is
installed and has the correct permissions to allow Tivoli
Access Manager to load the library.
Name: rgy_s_ad_ldap_cant_load_ldap_ client
216
Error Message Reference
Severity: Warning
Component: rgy / rgy_s_ad_ldap
HPDRG0153E Either Secure Socket Layer (SSL)
support is not enabled or the SSL key
file or key file password are missing or
incorrect. If the ’change user password
using LDAP APIs’ option is enabled,
SSL is required to be enabled with a
valid key file and key file password.
Explanation: Either Secure Socket Layer (SSL) is not
enabled or SSL key file and/or key file password are
missing. Change user passwords using LDAP APIs
requires SSL to be enabled with a valid key file and key
file password.
Action: Check to see if SSL is enabled and ensure the
key file and key file password are valid.
Name: rgy_s_ad_ldap_ssl_required
Number: 0x16b48099 (380928153)
Severity: Error
Component: rgy / rgy_s_ad_ldap
HPDRG0154E The Active Directory Global Catalog
server hostname(s) is either missing or
incorrect. The hostname(s) must be
specified and reachable when the
e-mail/UPN support is enabled.
Explanation: The Global Catalog server hostname is
required and must be available when the e-mail/UPN
format ID support is enabled.
Action: Mofify the registry configuration file and try
again.
Name: rgy_s_ad_ldap_gc_server_required
Number: 0x16b4809a (380928154)
Severity: Error
Component: rgy / rgy_s_ad_ldap
HPDRG0200E The specified group is a dynamic
group and cannot be modified.
Explanation: The specified group is a dynamic group
in which its membership is specified as a filter. Tivoli
Access Manager can use dynamic groups but cannot
create or manage them. Use the tools or utilities
provided with the directory server product to manage
the group.
Action: Use the tools or utilities provided with the
directory server product to manage a dynamic group.
HPDRG0202E Unable to load the IBM Directory
client library. The LDAP registry cannot
be initialized.
Explanation: To use the LDAP registry, Tivoli Access
Manager must locate and dynamically load the IBM
Directory client and it could not.
Action: Ensure that the IBM Directory client is
installed and has the correct permissions to allow Tivoli
Access Manager to load the library.
Name: rgy_s_ira_cant_load_ldap_client
Number: 0x16b480ca (380928202)
Severity: Error
Component: rgy / rgy_s_ira
Name: rgy_s_ira_cant_change_dynamic_ group
Number: 0x16b480c8 (380928200)
Severity: Error
Component: rgy / rgy_s_ira
HPDRG0201E Error code 0x%x was received from
the LDAP server. Error text: ″%s″.
Explanation: Tivoli Access Manager attempted to
perform a request to the LDAP server and received an
unexpected error code. The error code returned to
Access Manager from the LDAP server is displayed in
hexadecimal and error text describing the code is
displayed.
Action: Use the tools or utilities provided with the
directory server product to examine the error logs of
the LDAP server for possible additional information.
The documentation included with the LDAP server
being used, should have additional information for
possible causes for error codes. If the error code and
error text indicate a problem with Secure Socket Layer
(SSL) initialization, be sure that the correct SSL Key
Database (sometimes referred to as a ″keyring″ or
″keyfile″), password and label are configured. Also
ensure that the SSL Key Database file has read and
write permission for the process attempting to establish
an SSL connection to the LDAP server. If, after retrying
the operation, the error appears to be unrecoverable,
report this message to your IBM service representative.
Name: rgy_s_ira_ldap_unexpected_error
Number: 0x16b480c9 (380928201)
Severity: Error
Component: rgy / rgy_s_ira
HPDRG0203E Unable to load the Access Control
Information dynamic library. The LDAP
registry cannot be initialized.
Explanation: The Generic LDAP Access Control
Information dynamic library has been configured in the
ldap.conf configuration file and therefore Tivoli Access
Manager must dynamically load the library and it
could not.
Action: Ensure that the Access Control Information
dynamic library is configured properly, installed and
has the correct permissions to allow Tivoli Access
Manager to load the library. If the Access Control
Information dynamic library is not required,
unconfigure it by modifying the ldap.conf configuration
file and comment out the external-aci-libpath
parameter.
Name: rgy_s_ira_cant_load_gldapaci_ library
Number: 0x16b480cb (380928203)
Severity: Error
Component: rgy / rgy_s_ira
HPDRG0204E The LDAP server is an IBM Tivoli
Directory Server proxy and the required
cn=itamproxy container is missing. The
Policy Server cannot be configured.
Explanation: Tivoli Access Manager attempted to
configure the Policy Server but the LDAP server being
used is an IBM Tivoli Directory Server proxy. When the
proxy server is used, a container called cn=itamproxy is
required to exist on the proxy. This required container
was not found.
Action: Use the tools provided with the directory
server proxy to create a partition called cn=itamproxy
and instantiate the container object on the back-end
server. See the Access Manager documentation for
information about setting up and configuring the proxy
server for use with Access Manager. Also ensure that
the LDAP administration DN identity being used has
Chapter 1. Tivoli Access Manager Base Messages
217
sufficient authority to create LDAP objects on the
back-end server(s) being used. The LDAP
administration DN identity should usually be a
member of the global administration group (ex.
cn=manager,cn=ibmpolicies). If, after retrying the
operation, the error appears to be unrecoverable, report
this message to your IBM service representative.
Name: rgy_s_ira_secauthority_not_found
Name: rgy_s_ira_itamproxy_not_found
HPDRG0207W The LDAP server is an IBM Tivoli
Directory Server and is running in
configuration only mode. Access
Manager will not be able to operate
normally with the LDAP server in this
mode.
Number: 0x16b480cc (380928204)
Severity: Error
Component: rgy / rgy_s_ira
HPDRG0205E The LDAP server is an IBM Tivoli
Directory Server proxy. The requested
action cannot be performed with a proxy
server.
Explanation: Tivoli Access Manager attempted to
perform an action but the LDAP server being used is
an IBM Tivoli Directory Server proxy. The proxy server
has some restrictions about the set of LDAP actions
which can be performed. For example, schema cannot
be applied, Access Control Lists (ACLs) cannot be set
and the partition object cannot be modified via the
proxy.
Action: See the Access Manager documentation for
information about setting up and configuring the proxy
server for use with Access Manager. Also ensure that
the LDAP administration DN identity being used has
sufficient authority to create LDAP objects on the
back-end server(s) being used. The LDAP
administration DN identity should usually be a
member of the global administration group (ex.
cn=manager,cn=ibmpolicies). If, after retrying the
operation, the error appears to be unrecoverable, report
this message to your IBM service representative.
Name: rgy_s_ira_proxy_operation_not_ supported
Number: 0x16b480cd (380928205)
Severity: Error
Component: rgy / rgy_s_ira
HPDRG0206E The secAuthority=Default suffix is
required but was not found on the
LDAP server. The requested operation
cannot be performed.
Explanation: Tivoli Access Manager attempted to
create the management domain but the required LDAP
suffix (secAuthority=Default) was not found.
Action: See the Access Manager documentation for
information about setting up and configuring the
LDAP server for use with Access Manager. Ensure that
the secAuthority=Default suffix has been created and
that the LDAP server has been restarted to allow the
suffix to be used.
218
Error Message Reference
Number: 0x16b480ce (380928206)
Severity: Error
Component: rgy / rgy_s_ira
Explanation: The LDAP server is an IBM Tivoli
Directory Server and the server is currently running in
configuration only mode. In this mode, most normal
LDAP operations (such as update) cannot be
performed. Since many LDAP operations which Access
Manager performs are not possible, Access Manager
will not be able to operate normally until the LDAP
server is configured properly and restarted in normal
mode.
Action: View the IBM Tivoli Directory Server error
logs and correct any identified errors which prevent the
LDAP server from starting in normal mode. See the
IBM Tivoli Directory Server documentation for the
location of the error log and information for
configuring the server properly. Once the conditions
have been corrected, restart the LDAP server in normal
mode and restart Access Manager.
Name: rgy_s_ira_server_in_config_ only_mode
Number: 0x16b480cf (380928207)
Severity: Warning
Component: rgy / rgy_s_ira
HPDRG0208E The %s suffix is required but was not
found on the LDAP server. The
requested operation cannot be
performed.
Explanation: Tivoli Access Manager attempted to
create the management domain but the required LDAP
suffix was not found.
Action: See the Access Manager documentation for
information about setting up and configuring the
LDAP server for use with Access Manager. Ensure that
the suffix has been created and that the LDAP server
has been restarted to allow the suffix to be used.
Name: rgy_s_ira_suffix_not_found
Number: 0x16b480d0 (380928208)
Severity: Error
Component: rgy / rgy_s_ira
HPDRG0209E Ensure the LDAP administrator is a
member of the CN=Administrators
group of the partition.
Explanation: Tivoli Access Manager attempted to
create the management domain but the required LDAP
suffix was not found.
Component: rgy / rgy_s_ira
HPDRG0250E A user that you tried to add to a
group is already a member of that group
Explanation: Users that are already members of a
group cannot be added a second time.
Action: See the Access Manager documentation for
information about setting up and configuring the
ADAM server for use with Access Manager. Ensure
that the suffix has been created and that the LDAP
administrator has the authority to manage the partition.
Action: Use the pdadmin ’group show-members’
command to see the current group membership. Avoid
attempts to add those members a second time.
Name: rgy_s_ira_ensure_adam_administrator_
Number: 0x16b480fa (380928250)
Number: 0x16b480d1 (380928209)
Severity: Error
Severity: Error
Component: rgy / rgy_s_domino
Component: rgy / rgy_s_ira
HPDRG0210E The requested operation cannot be
performed. Ensure SSL has been
configured with the ADAM instance or
the ADAM SSL requirement for
password operations has been disabled.
Explanation: Tivoli Access Manager could not perform
a password operation with the ADAM registry. By
default, ADAM requires an SSL connection for any
password operation or the SSL requirement to be
disabled on the ADAM instance.
Action: See the Access Manager documentation for
information about setting up and configuring the
ADAM server for use with Access Manager.
Name: rgy_s_domino_duplicate_group_ member
HPDRG0251E A user registry request to the Domino
database failed with return code %lx.
Explanation: The Domino® server may be down, the
Domino server may be stopped, or the server is
unreachable over the network.
Action: Verify that the Domino server is functioning
normally. This can be accomplished by temporarily
starting the Notes client application and verifying that
the Notes name and address book is accessible.
Name: rgy_s_domino_unexpected_error
Number: 0x16b480fb (380928251)
Severity: Error
Component: rgy / rgy_s_domino
Name: rgy_s_ira_ensure_adam_ssl
Number: 0x16b480d2 (380928210)
HPDRG0252E The Domino error message is: %s
Severity: Error
Explanation: The Domino server may be down, the
Domino server may be stopped, or the server is
unreachable over the network.
Component: rgy / rgy_s_ira
HPDRG0211E The LDAP server reports a naming
violation. Ensure the distinguished
name (DN): %s is allowed by the LDAP
server schema.
Explanation: Tivoli Access Manager could not perform
the requested operation because the LDAP server did
not allow the DN used in the operation. The DN may
not be allowed because the LDAP server schema is not
configured to allow the DN containment or the RDN
values are not defined.
Action: See the Access Manager documentation for
information about setting up and configuring the
LDAP server for use with Access Manager.
Action: Refer to the Lotus Notes® or Domino
documentation for more information.
Name: rgy_s_domino_error_msg
Number: 0x16b480fc (380928252)
Severity: Error
Component: rgy / rgy_s_domino
HPDRG0300E Memory allocation failure.
Explanation: A memory allocation request issued by
the amldif2v6 program failed.
Number: 0x16b480d3 (380928211)
Action: Ensure that sufficient disk space and memory
are available in the system. If rerunning the amldif2v6
program does not resolve the problem, contact your
IBM service representative.
Severity: Error
Name: rgy_s_amldif2v6_memory_allocation_ failure
Name: rgy_s_ira_naming_violation
Chapter 1. Tivoli Access Manager Base Messages
219
Number: 0x16b4812c (380928300)
Severity: Error
HPDRG0304E A failure occurred while trying to
open file %s.
Component: rgy / rgy_s_amldif2v6
Explanation: A failure occurred while amldif2v6 was
trying to open the specified file.
HPDRG0301E The amldif2v6 program has
experienced an internal error caused by
the failure of a system call. (%s, rc=%d)
Action: Check the permissions on the directory that
contains the specified file.
Explanation: The amldif2v6 program experienced an
internal error caused by the failure of a system call.
Action: Ensure that sufficient disk space and memory
are available in the system. If rerunning the amldif2v6
program does not resolve the problem, contact your
IBM service representative.
Name: rgy_s_amldif2v6_internal_error
Number: 0x16b4812d (380928301)
Severity: Error
Component: rgy / rgy_s_amldif2v6
HPDRG0302E The amldif2v6 program has
experienced an internal error caused by
an unusable input LDIF file.
Explanation: While processing the input LDIF file, the
amldif2v6 program experienced an internal processing
error caused by an unusable input LDIF file.
Name: rgy_s_amldif2v6_file_open_failure
Number: 0x16b48130 (380928304)
Severity: Error
Component: rgy / rgy_s_amldif2v6
HPDRG0305E A failure occurred while trying to
make a temporary copy of the input
LDIF file (%s.tmp) .
Explanation: A failure occurred while amldif2v6 was
trying to make a temporary copy of the input LDIF file.
Action: Ensure that directory permissions allow this
file to be created.
Name: rgy_s_amldif2v6_copy_temp_ldif_ file_failure
Number: 0x16b48131 (380928305)
Severity: Error
Component: rgy / rgy_s_amldif2v6
Action: Ensure that the input LDIF file was generated
using one of the LDAP tools specified by the Access
Manager documentation.
HPDRG0306E A failure occurred while trying to
write to the file %s.
Name: rgy_s_amldif2v6_internal_error2
Explanation: A failure occurred while trying to write
to the specified file.
Number: 0x16b4812e (380928302)
Severity: Error
Action: Ensure that directory permissions allow this
file to be written.
Component: rgy / rgy_s_amldif2v6
Name: rgy_s_amldif2v6_file_write_failure
Number: 0x16b48132 (380928306)
HPDRG0303E The input LDIF file contains more
than one object with the distinguished
name %s.
Explanation: While processing the input LDIF file, the
amldif2v6 program detected more than one object with
the same distinguished name.
Action: Ensure that the input LDIF file was generated
using one of the LDAP tools specified by the Access
Manager documentation.
Severity: Error
Component: rgy / rgy_s_amldif2v6
HPDRG0307E A failure occurred while trying to read
file %s.
Explanation: A failure occurred while trying to read
the specified file.
Name: rgy_s_amldif2v6_duplicate_objects
Action: Ensure that directory permissions allow this
file to be read.
Number: 0x16b4812f (380928303)
Name: rgy_s_amldif2v6_file_read_failure
Severity: Error
Number: 0x16b48133 (380928307)
Component: rgy / rgy_s_amldif2v6
Severity: Error
Component: rgy / rgy_s_amldif2v6
220
Error Message Reference
HPDRG0308I Processing may take a long time for
large input files.
Name: rgy_s_amldif2v6_building_internal_ cache
Number: 0x16b48138 (380928312)
Explanation: This is a status message.
Severity: Notice
Action: No action is required.
Component: rgy / rgy_s_amldif2v6
Name: rgy_s_amldif2v6_longtime
Number: 0x16b48134 (380928308)
Severity: Notice
Component: rgy / rgy_s_amldif2v6
HPDRG0309I Begin copying all objects that do not
require processing directly to the output
LDIF file.
HPDRG0313I Writing the internal object cache to the
output LDIF file.
Explanation: This is a status message.
Action: No action is required.
Name: rgy_s_amldif2v6_writing_internal_
cache_to_output_file
Number: 0x16b48139 (380928313)
Explanation: This is a status message.
Severity: Notice
Action: No action is required.
Component: rgy / rgy_s_amldif2v6
Name: rgy_s_amldif2v6_first_phase_ beginning
Number: 0x16b48135 (380928309)
Severity: Notice
Component: rgy / rgy_s_amldif2v6
HPDRG0315I Processing complete.
Explanation: This is a status message.
Action: No action is required.
Name: rgy_s_amldif2v6_processing_ complete
HPDRG0310I Completed copying all objects that do
not require processing to the output
LDIF file.
Number: 0x16b4813b (380928315)
Explanation: This is a status message.
Component: rgy / rgy_s_amldif2v6
Action: No action is required.
Name: rgy_s_amldif2v6_first_phase_ complete
Number: 0x16b48136 (380928310)
Severity: Notice
Component: rgy / rgy_s_amldif2v6
Severity: Notice
HPDST0101I The security translation layer is already
initialized.
Explanation: Initialization of the security translation
layer has already been successfully performed.
Action: No action is required.
Name: amstli_s_already_initialized
HPDRG0311I Completed copying all objects that
require processing to a temporary input
LDIF file.
Number: 0x30923065 (814887013)
Explanation: This is a status message.
Component: bst / amstli_s_general
Action: No action is required.
Severity: Notice
Name: rgy_s_amldif2v6_second_phase_ complete
HPDST0102W The security translation layer is not
initialized.
Number: 0x16b48137 (380928311)
Explanation: See message.
Severity: Notice
Action: Initialize the security translation layer by
calling the security translation layer initialization
interface.
Component: rgy / rgy_s_amldif2v6
HPDRG0312I Building internal object cache from
objects read from the temporary input
LDIF file.
Explanation: This is a status message.
Name: amstli_s_not_initialized
Number: 0x30923066 (814887014)
Severity: Warning
Component: bst / amstli_s_general
Action: No action is required.
Chapter 1. Tivoli Access Manager Base Messages
221
HPDST0103I An attempt was made to use
unsupported functionality within the
security translation layer.
Explanation: See message.
Action: No action is required.
Name: amstli_s_not_supported
Number: 0x30923067 (814887015)
Severity: Notice
Component: bst / amstli_s_general
Component: bst / amstli_s_general
HPDST0118E The security context presented to the
security translation layer was not valid.
Explanation: The security context presented to the
security translation layer was not valid. Either it has
expired, has been destroyed, or the reference presented
was to a security context that has not been initialized.
Action: Establish a valid security context and retry the
failing operation. If the problem persists, contact your
IBM service representative.
Name: amstli_s_invalid_context
HPDST0104E A memory address that is not valid
was supplied to the security translation
layer.
Explanation: See message.
Action: Retry the failing operation. If the problem
persists, contact your IBM service representative.
Name: amstli_s_invalid_memory_reference
Number: 0x30923068 (814887016)
Severity: Error
Component: bst / amstli_s_general
HPDST0105E A credential that is not valid was
supplied to the security translation
layer.
Explanation: The credential supplied to the security
translation layer is not valid.
Action: Retry the failing operation after obtaining a
valid credential. If the problem persists, contact your
IBM service representative.
Name: amstli_s_invalid_credential
Number: 0x30923069 (814887017)
Severity: Error
Component: bst / amstli_s_general
HPDST0106E The context input token supplied to
the security translation layer is not
valid.
Explanation: The security translation layer was
presented a security token which could not be
validated for security context negotiation.
Action: Retry the failing operation with a valid
security token. If the problem persists, contact your
IBM service representative.
Name: amstli_s_invalid_context_input_ token
Number: 0x3092306a (814887018)
Severity: Error
222
Error Message Reference
Number: 0x30923076 (814887030)
Severity: Error
Component: bst / amstli_s_general
HPDST0120E The security translation layer was
unable to perform the memory
operation because memory is full.
Explanation: Memory has been exhausted and there is
no available memory to perform the memory operation.
Action: Check the memory status of the system and
retry the failing operation. If the problem persists,
contact your IBM service representative.
Name: amstli_s_no_memory
Number: 0x30923078 (814887032)
Severity: Error
Component: bst / amstli_s_general
HPDST0121E The security translation layer could not
load the security library.
Explanation: The security library required by the
security translation layer could not be found on the
system, or could not be loaded.
Action: Check that the security library is installed.
Retry the failing operation. If the problem persists,
contact your IBM service representative.
Name: amstli_s_security_library_load_ failed
Number: 0x30923079 (814887033)
Severity: Error
Component: bst / amstli_s_general
HPDST0122E The security translation layer could not
find the initializer function for the
security system.
Explanation: The security library that was loaded
does not have the required initializer function.
Action: Ensure that the correct security library is
installed on the system. Retry the failing operation. If
the problem persists, contact your IBM service
representative.
Name: amstli_s_security_init_function_ not_found
Number: 0x3092307a (814887034)
Severity: Error
Component: bst / amstli_s_general
HPDST0123E The security translation layer could not
initialize the security function table.
Explanation: The security translation layer
initialization using the security library initialization
function failed.
Action: Check the system security configuration and
system event log for details. Retry the failing operation.
If the problem persists, contact your IBM service
representative.
Name: amstli_s_security_function_ table_init_failed
Number: 0x3092307b (814887035)
Severity: Error
Component: bst / amstli_s_general
HPDST0126E The buffer type encountered by the
security translation layer is unknown.
Explanation: An unknown buffer type was
encountered by the security translation layer.
Action: Retry the failing operation. If the problem
persists, contact your IBM service representative.
Component: bst / amstli_s_general
HPDST0128E A routine was called with one or more
parameter values that were not correct.
Explanation: The parameter values supplied to the
security translation layer are very important. If the
values supplied by a caller are incorrect the routines
cannot continue to process the parameters. This
typically occurs when required length parameters have
a value of less than or equal to zero.
Action: Retry the failing operation. If the problem
persists, contact your IBM service representative.
Name: amstli_s_parameter_error
Number: 0x30923080 (814887040)
Severity: Error
Component: bst / amstli_s_general
HPDST0129E The security service function %s
returned major error code %d and minor
error code %d.
Explanation: A security service function failed and
provided a minor error code.
Action: Look in the Tivoli Access Manager Problem
Determination Guide section dealing with common
Web security SPNEGO problems. If no documentation
describing the solution is available, consult the OS
specific documentation for the security service
(Kerberos or SSPI) or contact your IBM service
representative.
Name: amstli_s_function_error
Name: amstli_s_unknown_buffer_type
Number: 0x30923081 (814887041)
Number: 0x3092307e (814887038)
Severity: Error
Severity: Error
Component: bst / amstli_s_general
Component: bst / amstli_s_general
HPDST0127E An undiagnosed error was detected by
the security translation layer. The
security system specific error code was:
%08x.
Explanation: An undiagnosed error was detected by
the security translation layer. The security system
specific error is provided to assist with debugging.
Action: Check system event logs and system
documentation for further details of the problem. Retry
the failing operation. If the problem persists, contact
your IBM service representative.
Name: amstli_s_unknown_error
Number: 0x3092307f (814887039)
Severity: Error
HPDST0130E The security service function %s
returned the error ’%s’ (code
0x%08x/%d).
Explanation: A security service function failed. The
error string and error code provide a more detailed
reason for the failure.
Action: Look in the Tivoli Access Manager Problem
Determination Guide section dealing with common
Web security SPNEGO problems. If no documentation
describing the solution is available, consult the OS
specific documentation for the security service
(Kerberos or SSPI) or contact your IBM service
representative.
Name: amstli_s_function_error2
Number: 0x30923082 (814887042)
Severity: Error
Chapter 1. Tivoli Access Manager Base Messages
223
Component: bst / amstli_s_general
224
Error Message Reference
Chapter 2. Tivoli Access Manager for e-business WebSEAL
Messages
This chapter describes the messages provided by Tivoli Access Manager for
e-business WebSEAL.
DPWAD0309E The WebSEAL administration service
has not been initalized.
Number: 0x38983141 (949498177)
Severity: Notice
Explanation: The WebSEAL administration service
plug-in failed to initialize properly.
Component: wad / admin_s_general
Action: Check for other initialization errors and/or
configuration problems that may have previously
occurred.
DPWAD0328E The junction import command
received invalid data
Name: admin_svc_uninitialized
Number: 0x38983135 (949498165)
Severity: Error
Component: wad / admin_s_general
DPWAD0311I Invalid object name.
Explanation: An object name was presented which is
not considered valid.
Action: Check the value of the object name being used
to make sure it is valid.
Name: admin_svc_bad_object_name
Number: 0x38983137 (949498167)
Severity: Notice
Component: wad / admin_s_general
Explanation: An error occurred when trying to extract
one or more of the junction attributes sent in the admin
command.
Action: Check that the data being passed into the
junction import command is valid.
Name: junc_imp_attrlist_extract_failed
Number: 0x38983148 (949498184)
Severity: Error
Component: wad / admin_s_general
DPWAD0329E The junction import command
received an invalid version
Explanation: The version in the junction definition is
not supported by this version of WebSEAL
Action: Check the version of the junction in the XML
definition
Name: junc_imp_attrlist_extract_version_ failed
DPWAD0312E Object list failed: %s
Explanation: The object list command failed to
complete correctly.
Action: This is a generic error which will contain
further details when output.
Name: admin_svc_object_list_failed
Number: 0x38983138 (949498168)
Severity: Error
Number: 0x38983149 (949498185)
Severity: Error
Component: wad / admin_s_general
DPWAD0330E The junction import could not create
the junction file
Explanation: WebSEAL can not create the junction file.
Component: wad / admin_s_general
Action: Check the filesystem to make sure there is
space available, or that the WebSEAL server has
permissions to create/write the file.
DPWAD0321I Invalid command.
Name: junc_imp_cannot_create_jct
Explanation: The command had a syntax error.
Number: 0x3898314a (949498186)
Action: Check the command name or the arguments
supplied to the command are correct.
Severity: Error
Component: wad / admin_s_general
Name: admin_invalid_command
© Copyright IBM Corp. 2001, 2008
225
DPWAD0331E The junction import could not write
the junction file
Explanation: An error occurred writing the junction
definition.
Action: Check the filesystem to make sure there is
space available, or that the WebSEAL server has
permissions to create/write the file.
Name: junc_imp_cannot_write_jct
Number: 0x3898314b (949498187)
Severity: Error
Component: wad / admin_s_general
Component: wad / admin_s_general
DPWAD0335E Error reading junction point %s.
Explanation: The file name representing the junction
could not constructed.
Action: An internal error occurred in WebSEAL when
trying to build the encoded filename. Check for
previous errors.
Name: junc_point_read_failed
Number: 0x3898314f (949498191)
Severity: Error
Component: wad / admin_s_general
DPWAD0332E The junction export could not read
the junction directory
DPWAD0336E Error reading junction file %s.
Explanation: An error occurred while trying to read
the contents of the junction database directory.
Explanation: There was an error opening or parsing
the junction definition file.
Action: Check to make sure that WebSEAL is able to
read the contents of the directory which is configured
to contain the junction definitions.
Action: Verify the .xml file exists, is readable, and has
valid data.
Name: junc_exp_cannot_read_db
Number: 0x3898314c (949498188)
Severity: Error
Name: junc_file_read_failed
Number: 0x38983150 (949498192)
Severity: Error
Component: wad / admin_s_general
Component: wad / admin_s_general
DPWAD0342E Error reading input user session id.
DPWAD0333E Unable to add junction attributes into
command handler
Explanation: An error occurred returning the junction
data to the client
Action: This is an internal error which occurs when
WebSEAL is marshalling the junction data to the export
command. Check for other errors occurring previously.
Name: junc_exp_attrlist_add_entry_failed
Number: 0x3898314d (949498189)
Explanation: There was an error parsing the user
session id.
Action: Verify that the input is being passed correctly.
Name: termsess_invalid_user_session_id
Number: 0x38983156 (949498198)
Severity: Error
Component: wad / admin_s_general
Severity: Error
DPWAD0343E Error reading input user id.
Component: wad / admin_s_general
Explanation: There was an error parsing the user ID.
DPWAD0334E An invalid junction point was
specified.
Action: Verify that user ID is being input correctly.
Name: termallsess_invalid_user_id
Explanation: WebSEAL was unable to build the
junction filename.
Number: 0x38983157 (949498199)
Action: An internal error occurred in WebSEAL when
trying to build the encoded filename. Check for
previous errors.
Component: wad / admin_s_general
Name: junc_bad_jct_point
Number: 0x3898314e (949498190)
Severity: Error
226
Error Message Reference
Severity: Error
DPWAD0344I User not logged in.
Explanation: Bad input, or User’s sessions were
already terminated.
Action: Verify validity of input, or assume sessions
were already terminated.
Name: termallsess_nonexistent_userid
Name: fsso_conf_mgmt_no_junction
Number: 0x3898316c (949498220)
Severity: Error
Number: 0x38983158 (949498200)
Component: wad / admin_s_general
Severity: Notice
Component: wad / admin_s_general
DPWAD0365E The junction: %s is not a valid
junction on this WebSEAL server.
DPWAD0345E No matching User Session found.
Explanation: An invalid junction point was provided.
Explanation: Bad input, or User session was already
terminated.
Action: Ensure that the junction attribute in indata is a
valid junction
Action: Verify validity of input, or assume session was
already terminated.
Name: fsso_conf_mgmt_invalid_jct
Name: termsess_nonexistent_user_session_ id
Number: 0x3898316d (949498221)
Severity: Error
Number: 0x38983159 (949498201)
Component: wad / admin_s_general
Severity: Error
Component: wad / admin_s_general
DPWAD0366E The junction: %s is not an fsso
junction on this WebSEAL server.
DPWAD0362E The dynurl configuration file %s
cannot be opened for reading.
Explanation: The junction specified is not an FSSO
junction.
Explanation: An attempt to open the dynurl
configuration file for reading failed
Action: Ensure that the junction specified is an FSSO
junction.
Action: Ensure that the file exists on the WebSEAL
server and is readable
Name: fsso_conf_mgmt_not_fsso_jct
Name: dynurl_read_no_file
Number: 0x3898316e (949498222)
Severity: Error
Number: 0x3898316a (949498218)
Component: wad / admin_s_general
Severity: Error
Component: wad / admin_s_general
DPWAD0367E The fsso configuration file: %s could
not be opened for reading.
DPWAD0363E The jmt configuration file %s cannot
be opened for reading.
Explanation: The junction specified could not be
opened.
Explanation: An attempt to open the jmt configuration
file for reading failed
Action: Ensure that the fsso configuration file for the
junction specified exists and is readable.
Action: Ensure that the file exists on the WebSEAL
server and is readable
Name: fsso_conf_mgmt_no_file
Name: jmt_read_no_file
Number: 0x3898316f (949498223)
Severity: Error
Number: 0x3898316b (949498219)
Component: wad / admin_s_general
Severity: Error
Component: wad / admin_s_general
DPWAD0368E Could not create dynurl configuration
file: %s
DPWAD0364E You must specify a junction point to
read or write an fsso configuration file.
Explanation: WebSEAL was unable to create the
dynurl conf file.
Explanation: A junction point is necessary to
determine which fsso configuration file to read or write
Action: Ensure that ivmgr has filesystem permissions
to create a file in the directory where the dynurl
configuration file will be stored
Action: Add the junction point to the junction
attribute of the indata attribute list
Name: dynurl_write_file_create_failed
Chapter 2. Tivoli Access Manager for e-business WebSEAL Messages
227
Number: 0x38983170 (949498224)
Number: 0x38983174 (949498228)
Severity: Error
Severity: Warning
Component: wad / admin_s_general
Component: wad / admin_s_general
DPWAD0369E Reloading the in memory dynurl
table failed
DPWAD0373E Could not create fsso configuration
file: %s
Explanation: An error occurred while trying to read
the dynurl configuration file.
Explanation: An error occurred while trying to read in
the new fsso configuration file.
Action: Ensure that the new file specified is in the
proper format
Action: Ensure that ivmgr has filesystem permissions
to create a file in the directory where the fsso
configuration file will be stored
Name: dynurl_write_reload_failed
Number: 0x38983171 (949498225)
Severity: Error
Component: wad / admin_s_general
Name: fsso_write_file_create_failed
Number: 0x38983175 (949498229)
Severity: Error
Component: wad / admin_s_general
DPWAD0370E Could not create jmt configuration
file: %s
DPWAD0374E The backup operation failed for %s
Explanation: An error occured while trying to open
the jmt configuration file.
Explanation: An error occurred while attempting to
create a backup copy of the original configuration file.
Action: Ensure that ivmgr has filesystem permissions
to create a file in the directory where the jmt
configuration file will be stored
Action: Ensure that ivmgr has filesystem permissions
to create a file in the directory where the configuration
file resides.
Name: jmt_write_file_create_failed
Name: cfg_file_mgmt_backup_failed
Number: 0x38983172 (949498226)
Number: 0x38983176 (949498230)
Severity: Error
Severity: Error
Component: wad / admin_s_general
Component: wad / admin_s_general
DPWAD0371E Reloading the in memory jmt table
failed
DPWAD0375E Reloading junction: %s failed
Explanation: An error occurred while trying to read in
the new jmt configuration file.
Action: Ensure that the new file specified is in the
proper format.
Name: jmt_write_reload_failed
Number: 0x38983173 (949498227)
Severity: Error
Explanation: An error occurred while trying to load
the fsso configuration file.
Action: Ensure that the new file specified is in the
proper format.
Name: fsso_write_reload_failed
Number: 0x38983177 (949498231)
Severity: Error
Component: wad / admin_s_general
Component: wad / admin_s_general
DPWAD0376E The restore operation failed for %s
DPWAD0372W The junction specified does not exist.
The configuration file: %s was created.
Explanation: An fsso junction may not be created
without the configuration file being inplace. This allows
the file to be created before the junction
Action: The junction may now be created using this
new configuration file
Name: fsso_write_no_such_junction
228
Error Message Reference
Explanation: An error occurred while trying to restore
a backed up version of a configuration file.
Action: Ensure that ivmgr has filesystem permissions
to create a file in the directory where the configuration
file resides.
Name: cfg_file_mgmt_restore_failed
Number: 0x38983178 (949498232)
Severity: Error
Name: ecsso_unable_to_setup_module_ configuration
Component: wad / admin_s_general
Number: 0x389831c6 (949498310)
Severity: Error
DPWAD0377I The old configuration file was
successfully restored.
Component: wad / admin_s_config
Explanation: A configuration file was restored and
reloaded successfully.
Action: None.
Name: cfg_file_restore_succeeded
DPWAD0455E The value ’%s’ is not a valid option
for ip-support-level. Use one of
’displaced-only’, ’generic-only’, or
’displaced-and-generic’.
Explanation: An invalid setting was set for the
webseald configuration file option ip-support-level.
Number: 0x38983179 (949498233)
Severity: Notice
Action: Change the setting for ip-support-level to a
valid one.
Component: wad / admin_s_general
Name: ip_support_level_invalid_level
DPWAD0452E eCSSO authentication is enabled but
no Master Authorization Server is
defined.
Number: 0x389831c7 (949498311)
Severity: Error
Explanation: The e-community-sso-auth has been set
without setting a master authorization server.
Component: wad / admin_s_config
Action: Update the configuration file and set a master
authorization server in the master-authn-server value
under the [e-community-sso] stanza.
DPWAD0456E The value displaced-only is not a
valid option for ip-support-level when
ipv6-support is enabled.
Name: ecsso_no_mas_configured
Explanation: displaced-only can not be set when
ipv6-support = yes.
Number: 0x389831c4 (949498308)
Action: Change the setting for ip-support-level to
generic-only or displaced-and-generic.
Severity: Error
Component: wad / admin_s_config
Name: ip_support_level_invalid_level_ for_ipv6
Number: 0x389831c8 (949498312)
DPWAD0453E Duplicate eCSSO domain ’%s’
defined under the [e-communitydomains] stanza.
Severity: Error
Component: wad / admin_s_config
Explanation: Each domain under the
[e-community-domains] stanza must be unique.
DPWAD0600E An error occurred attempting to
determine the current installed version
of WebSEAL. WebSEAL cannot start.
Action: Remove the duplicate entry and retry.
Name: ecsso_duplicate_domain_configured
Severity: Error
Explanation: This error occurs if the current installed
version of WebSEAL cannot be determined. This
indicates a severe problem.
Component: wad / admin_s_config
Action: Contact your IBM Support representative.
Number: 0x389831c5 (949498309)
Name: upgrade_s_no_current_version
DPWAD0454E Unable to configure the eCSSO
authentication module for domain/host
’%s’: status 0x%x.
Explanation: The eCSSO (consume or create)
authentication module configured for the domain/host
specified returned an error while being initialised.
Action: Either a bad shared library was specified for
the authentication module or the configuration is
incorrect, for example the key files specified are
missing or inaccessible.
Number: 0x38983258 (949498456)
Severity: Error
Component: wad / admin_s_upgrade
DPWAD0601E The version string ’%s’ is invalid.
Explanation: This error occurs if an invalid version
number is found.
Action: Contact your IBM Support representative.
Chapter 2. Tivoli Access Manager for e-business WebSEAL Messages
229
Name: upgrade_s_invalid_version
Number: 0x38983259 (949498457)
Severity: Error
Component: wad / admin_s_upgrade
DPWAD0602E An error occurred attempting to
determine the originally installed
version of WebSEAL to verify that the
configuration file is up-to-date.
WebSEAL cannot start.
Explanation: This error occurs if the originally
installed version of WebSEAL cannot be determined.
This indicates a severe problem.
Action: Contact your IBM Support representative.
Name: upgrade_s_no_orig_version
Number: 0x3898325a (949498458)
Severity: Error
Component: wad / admin_s_upgrade
DPWAD0603E An error occurred attempting to
backup the configuration file.
Explanation: This error occurs when WebSEAL is
trying to make a backup copy of the original
configuration file prior to upgrade.
DPWAD0605W The configuration file entry ″[%s]%s″
was not found.
Explanation: This error occurs when WebSEAL is
trying to determine the version of the WebSEAL server
that created the configuration file.
Action: No action is necessary - the WebSEAL server
will try another method to determine the original
version of WebSEAL installed, and update the
configuration file as necessary.
Name: upgrade_s_stanza_entry_missing
Number: 0x3898325d (949498461)
Severity: Warning
Component: wad / admin_s_upgrade
DPWAD0606E An error occurred attempting to
migrate the configuration file entry
[%s]%s.
Explanation: This error occurs when WebSEAL is
trying to perform migration of a configuration file
entry.
Action: You may need to manually update the entry
to allow migration to proceed. Examine the
configuration file and documentation for more
information on the particular entry.
Name: upgrade_s_entry_migration_failed
Action: Examine the log file for additional errors.
More information about the problem that occurred will
be present.
Number: 0x3898325e (949498462)
Name: upgrade_s_backup_failed
Component: wad / admin_s_upgrade
Severity: Error
Number: 0x3898325b (949498459)
Component: wad / admin_s_upgrade
DPWAD0607E An error occurred attempting to
migrate the configuration file entry
[%s].
DPWAD0604E An error occurred attempting to
restore the configuration file.
Explanation: This error occurs when WebSEAL is
trying to perform migration of a configuration file
stanza.
Severity: Error
Explanation: This error occurs when WebSEAL is
trying to restore a backed up copy of the configuration
file.
Action: Examine the log file for additional errors.
More information about the problem that occurred will
be present.
Action: You may need to manually update the entry
to allow migration to proceed. Examine the
configuration file and documentation for more
information on the particular entry.
Name: upgrade_s_stanza_migration_failed
Number: 0x3898325f (949498463)
Name: upgrade_s_restore_failed
Severity: Error
Number: 0x3898325c (949498460)
Component: wad / admin_s_upgrade
Severity: Error
Component: wad / admin_s_upgrade
DPWAD0608I A backup copy of the configuration
file has been saved using the file name
’%s’.
Explanation: This message indicates that WebSEAL
made a backup copy of the configuration file.
230
Error Message Reference
Action: No action is necessary.
Component: wad / admin_s_upgrade
Name: upgrade_s_made_backup
DPWAD0612I WebSEAL is correcting syntax errors
in the configuration file ’%s’.
Number: 0x38983260 (949498464)
Severity: Notice
Component: wad / admin_s_upgrade
DPWAD0609I The original configuration file ’%s’
has been restored.
Explanation: This message indicates that WebSEAL
has restored a backup copy of the configuration file.
Action: No action is necessary.
Explanation: Previous versions of WebSEAL allowed
certain syntax errors in configuration files that are no
longer permitted. WebSEAL is correcting the syntax
errors.
Action: No action is necessary.
Name: upgrade_s_config_clean
Number: 0x38983264 (949498468)
Severity: Notice
Name: upgrade_s_restored_backup
Component: wad / admin_s_upgrade
Number: 0x38983261 (949498465)
DPWAD0613I Configuration file migration was
successful.
Severity: Notice
Component: wad / admin_s_upgrade
DPWAD0610I WebSEAL is migrating the
configuration file ’%s’ from version %d
to version %d.
Explanation: This message indicates that WebSEAL is
performing configuration file migration.
Explanation: This message indicates that WebSEAL
has completed configuration file migration.
Action: No action is necessary.
Name: upgrade_s_config_migration_ complete
Number: 0x38983265 (949498469)
Severity: Notice
Action: No action is necessary.
Component: wad / admin_s_upgrade
Name: upgrade_s_config_migration_begun
Number: 0x38983262 (949498466)
DPWAD0752E A replica set must be specified for the
virtual host junction ’%s’.
Severity: Notice
Component: wad / admin_s_upgrade
DPWAD0611E A serious error occurred performing
configuration file migration. You may
need to perform manual migration of
some configuration options.
Explanation: This message indicates that a serious
problem occurred while attempting to update the
configuration file.
Action: Refer to other log messages to attempt to
determine the problem. You may be able to perform
manual migration of configuration file entries, or you
may need to contact your IBM support representative.
If you wish to attempt to manual migration, comment
the problematic entries out of the WebSEAL
configuration file and restart the WebSEAL server. Once
the WebSEAL server has started successfully, manually
modify the configuration file to restore the functionality
you have disabled, refering to the WebSEAL
Administration Guide where necessary.
Explanation: When the SMS is used for session
storage, all virtual host junctions must have a replica
set specified with the -z junction option.
Action: Create the junction using the -z <replica-set>
option. The <replica-set> must be one of the replica
sets listed in the WebSEAL configuration file.
Name: junction_requires_replica_set
Number: 0x389832f0 (949498608)
Severity: Error
Component: wad / admin_s_junction
DPWAD0753E A replica set must be specified for the
junction.
Explanation: When the SMS is used for session
storage, all virtual host junctions must have a replica
set specified with the -z junction option.
Name: upgrade_s_migration_failed
Action: Create the junction using the -z <replica-set>
option. The <replica-set> must be one of the replica
sets listed in the WebSEAL configuration file.
Number: 0x38983263 (949498467)
Name: junction_requires_replica_set_ no_arg
Severity: Error
Number: 0x389832f1 (949498609)
Chapter 2. Tivoli Access Manager for e-business WebSEAL Messages
231
Severity: Error
for a separate message if they are busy too.
Component: wad / admin_s_junction
Action: The command has had no effect on junctions,
retry the command at a later time.
DPWAD0754E The Virtual Host junction ’%s’ must
have an eCSSO domain key in the
configuation file for it’s virtual host
name ’%s’.
Name: junction_previous_reload_delayed
Explanation: When the Virtual Host junction was
created or restored from the junction database it’s
virtual host name was discovered not to have a eCSSO
domain key. These are configured using
[e-community-domains] and [e-community-domainkeys:\<domain>]
Component: wad / admin_s_junction
Action: Add a eCSSO key for the domain the Virtual
Host junction is in using the [e-community-domains]
and [e-community-domain-keys:\<domain>] stanzas
and restart WebSEAL so it recognises the changes. Then
retry creating the Virtual Host junction.
Name: vhjunction_requires_ecsso_domain
Number: 0x389832f2 (949498610)
Severity: Error
Component: wad / admin_s_junction
Number: 0x389832f4 (949498612)
Severity: Warning
DPWAD0757W The junction reload command did
not complete for Virtual Host junctions
as a previous reload is still in effect. Try
again later.
Explanation: A reload command issued earlier is still
waiting for some requests using the older Virtual Host
junction definitions to complete. New reload
commands will not have an effect until these requests
complete. Regular junctions are independent and you
should look for a separate message if they are busy too.
Action: The command has had no effect on Virtual
Host junctions, retry the command at a later time.
Name: vhjunction_previous_reload_delayed
Number: 0x389832f5 (949498613)
DPWAD0755E The Virtual Host junction must have
an eCSSO domain key in the
configuration file for it’s virtual host
name.
Severity: Warning
Explanation: When the Virtual Host junction was
created or restored from the junction database it’s
virtual host name was discovered not to have a eCSSO
domain key. These are configured using
[e-community-domains] and [e-community-domainkeys:\<domain>]
DPWAD0782E Could not take junction offline
Action: Add a eCSSO key for the domain the Virtual
Host junction is in using the [e-community-domains]
and [e-community-domain-keys:\<domain>] stanzas
and restart WebSEAL so it recognises the changes. Then
retry creating the Virtual Host junction.
Name: vhjunction_requires_ecsso_domain_ no_arg
Number: 0x389832f3 (949498611)
Severity: Error
Component: wad / admin_s_junction
DPWAD0756W The junction reload command did
not complete for regular junctions as a
previous reload is still in effect. Try
again later.
Explanation: A reload command issued earlier is still
waiting for some requests using the older junction
definitions to complete. New reload commands will not
have an effect until these requests complete. Virtual
Host junctions are independent and you should look
232
Error Message Reference
Component: wad / admin_s_junction
Explanation: This message is followed by an
explanation of why the junction could not be taken
offline.
Action: Correct the problem described in the message
displayed after this message.
Name: could_not_offline_junction
Number: 0x3898330e (949498638)
Severity: Error
Component: wad / admin_s_junction
DPWAD0783E Could not take Virtual Host junction
offline
Explanation: This message is followed by an
explanation of why the Virtual Host junction could not
be taken offline.
Action: Correct the problem described in the message
displayed after this message.
Name: vh_could_not_offline_junction
Number: 0x3898330f (949498639)
Severity: Error
Component: wad / admin_s_junction
DPWAD0784E Could not throttle junction
Explanation: This message is followed by an
explanation of why the junction could not be throttled.
Action: Correct the problem described in the message
displayed after this message.
DPWAD0788E You can only change the operation
state of TCP, SSL, TCP Proxy, and SSL
Proxy junctions.
Explanation: Not all junction types support
operational state changes.
Action: Ensure you are applying the command to the
correct junction.
Name: could_not_throttle_junction
Number: 0x38983310 (949498640)
Name: can_only_use_junction
Severity: Error
Number: 0x38983314 (949498644)
Component: wad / admin_s_junction
Severity: Error
Component: wad / admin_s_junction
DPWAD0785E Could not throttle Virtual Host
junction
Explanation: This message is followed by an
explanation of why the Virtual Host junction could not
be throttled.
Action: Correct the problem described in the message
displayed after this message.
DPWAD0789E You can only change the operation
state of TCP, SSL, TCP Proxy, and SSL
Proxy Virtual Host junctions.
Explanation: Not all Virtual Host junction types
support operational state changes.
Action: Ensure you are applying the command to the
correct Virtual Host junction.
Name: vh_could_not_throttle_junction
Number: 0x38983311 (949498641)
Name: vh_can_only_use_junction
Severity: Error
Number: 0x38983315 (949498645)
Component: wad / admin_s_junction
Severity: Error
Component: wad / admin_s_junction
DPWAD0786E Could not bring junction online
Explanation: This message is followed by an
explanation of why the junction could not be brought
online.
Action: Correct the problem described in the message
displayed after this message.
Name: could_not_online_junction
DPWAD0790E Invalid server ID
Explanation: The argument passed to -i was not a
valid server UUID.
Action: Obtain the correct UUID by using the ’show’
command.
Name: invalid_server_id
Number: 0x38983312 (949498642)
Number: 0x38983316 (949498646)
Severity: Error
Severity: Error
Component: wad / admin_s_junction
Component: wad / admin_s_junction
DPWAD0787E Could not bring Virtual Host junction
online
Explanation: This message is followed by an
explanation of why the Virtual Host junction could not
be brought online.
Action: Correct the problem described in the message
displayed after this message.
Name: vh_could_not_online_junction
Number: 0x38983313 (949498643)
Severity: Error
DPWAD0791E Invalid server ID
Explanation: The argument passed to -i was not a
valid server UUID.
Action: Obtain the correct UUID by using the
’virtualhost show’ command.
Name: vh_invalid_server_id
Number: 0x38983317 (949498647)
Severity: Error
Component: wad / admin_s_junction
Component: wad / admin_s_junction
Chapter 2. Tivoli Access Manager for e-business WebSEAL Messages
233
DPWAD0792E Server %s not found at junction %s
Explanation: An attempt was made to change the
operational state of a junction server based on a UUID
which did not match any of the servers of the junction.
Action: Use the ’show’ command to find the correct
UUID.
Name: server_not_found
Number: 0x38983318 (949498648)
Severity: Error
Component: wad / admin_s_junction
DPWAD0793E Server %s not found at Virtual Host
junction %s
Explanation: An attempt was made to change the
operational state of a Virtual Host junction server based
on a UUID which did not match any of the servers of
the Virtual Host junction.
Action: Use the ’virtualhost show’ command to find
the correct UUID.
Name: vh_server_not_found
Number: 0x38983319 (949498649)
Severity: Error
Component: wad / admin_s_junction
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0451E The Access Manager WebSEAL
installation directory could not be
found. Please install Access Manager
WebSEAL.
Explanation: The installation directory for AMWeb
could not be found in the registry. This is probably
because AMWeb is not installed.
Action: Make sure that Access Manager WebSEAL is
installed.
Name: amweb_cfg_m_get_webdir_fail
Number: 0x389d51c3 (949834179)
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0452E The configuration file ’%s’ could not
be opened.
Explanation: The configuration file may not exist, or
file system permissions may prevent it from being
opened.
Action: Make sure that the configuration file exists
and can be read and written.
Name: amweb_cfg_m_open_config_file_fail
DPWAD0794I The -P and -H options must be
supplied for SSL and TCP Proxy type
junction servers.
Explanation: See text.
Number: 0x389d51c4 (949834180)
Severity: Error
Component: wcf / amweb_cfg_s_error
Action: Specifiy the -P and -H options when running
the create and add commands with -t sslproxy or
tcpproxy.
DPWCF0453E The file ’%s’ could not be opened.
Error code: %d
Name: junction_missing_p_h_flags
Explanation: The file could not be opened. The system
function returned the indicated error code
Number: 0x3898331a (949498650)
Severity: Notice
Component: wad / admin_s_junction
Action: Make sure that the file exists in the system,
and that it is readable and writable. If necessary, look
up the system error code to determine the problem.
Name: amweb_cfg_m_open_file_fail
DPWCF0450E The Access Manager Runtime
installation directory could not be
found. Please install Access Manager
Runtime.
Explanation: The installation directory for AMRTE
could not be found in the registry. This is probably
because AMRTE is not installed.
Action: Make sure that AMRTE is installed.
Name: amweb_cfg_m_get_basedir_fail
Number: 0x389d51c2 (949834178)
234
Error Message Reference
Number: 0x389d51c5 (949834181)
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0454E The file ’%s’ could not be closed.
Error code %d.
Explanation: A file could not be closed because of the
indicated system error.
Action: Make sure that the file system on which the
file is located is not full. Also make sure that the
directory for the file exists and is writable. If necessary,
look up the system error code to identify the problem.
Name: amweb_cfg_m_close_file_fail
Number: 0x389d51ca (949834186)
Severity: Error
Component: wcf / amweb_cfg_s_error
Number: 0x389d51c6 (949834182)
Severity: Error
DPWCF0459E The instance name ’%s’ contains
invalid characters. Instance names must
consist of alphanumeric characters plus
the symbols: ’-’ ’_’ ’.’
Component: wcf / amweb_cfg_s_error
DPWCF0455E The directory ’%s’ could not be
opened. Error code: %d
Explanation: The provided instance name contains
illegal characters.
Explanation: The directory could not be opened
because of the indicated system error code.
Action: Use an instance name that contains only valid
characters.
Action: Make sure that the directory exists and file
system permissions allow it to be read.
Name: amweb_cfg_m_cfg_instname_alphanum
Number: 0x389d51cb (949834187)
Name: amweb_cfg_m_open_dir_fail
Severity: Error
Number: 0x389d51c7 (949834183)
Component: wcf / amweb_cfg_s_error
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0460E The IP address ’%s’ does not exist in
the system.
DPWCF0456E The directory ’%s’ could not be closed.
Error code: %d
Explanation: Closing a directory failed because of the
indicated system error code.
Action: Make sure that the directory exists and is
writable.
Explanation: The provided IP address does not exist
in the system.
Action: Make sure that the provided IP address exists
in the system.
Name: amweb_cfg_m_ipaddress_not_exist
Number: 0x389d51cc (949834188)
Name: amweb_cfg_m_close_dir_fail
Severity: Error
Number: 0x389d51c8 (949834184)
Component: wcf / amweb_cfg_s_error
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0461E The key file ’%s’ does not exist in the
system.
DPWCF0457E The instance name ’%s’ is already in
use.
Explanation: The instance name is already in use.
Explanation: The provided key file does not exist in
the system.
Action: Use a different instance name.
Action: Make sure the provided key file exists in the
system.
Name: amweb_cfg_m_cfg_instname_inuse
Name: amweb_cfg_m_file_not_exist
Number: 0x389d51c9 (949834185)
Number: 0x389d51cd (949834189)
Severity: Error
Severity: Error
Component: wcf / amweb_cfg_s_error
Component: wcf / amweb_cfg_s_error
DPWCF0458E The length of the instance name ’%s’
is more than %d characters.
DPWCF0462E The key file password is incorrect.
Explanation: The provided instance name is more
than 20 characters.
Action: Use an instance name that has less than 20
characters.
Name: amweb_cfg_m_cfg_instname_toolong
Explanation: The key file password may have been
entered incorrectly.
Action: Make sure that the key file password is
entered correctly.
Name: amweb_cfg_m_keyfilepwd_incorrect
Number: 0x389d51ce (949834190)
Chapter 2. Tivoli Access Manager for e-business WebSEAL Messages
235
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0467E Fields marked with an asterisk (*) are
required.
Explanation: Not all required inputs were provided.
DPWCF0463E The LDAP server could not be
contacted via SSL on port %d.
Explanation: The SSL LDAP port may have been
entered incorrectly, or the LDAP server may not be
running.
Action: Make sure the LDAP server is running.
Correct the SSL LDAP port if necessary.
Name: amweb_cfg_m_sslport_incorrect
Number: 0x389d51cf (949834191)
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0464E The key file for SSL communcation
with the LDAP server is invalid.
Explanation: The wrong key file may have been
entered.
Action: Make sure that the provided key file is a valid
key file for SSL communication with the LDAP server
Action: Fill in values for all of the required fields.
Name: amweb_cfg_m_asterisk_fields_ required
Number: 0x389d51d3 (949834195)
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0468E The Policy Server could not be
contacted. Please make sure the Policy
Server is running and try again.
Explanation: The Policy Server must be running in
order to configure WebSEAL.
Action: Make sure the Policy Server is functioning
properly. Restart the Policy Server if necessary.
Name: amweb_cfg_m_mgr_not_running
Number: 0x389d51d4 (949834196)
Severity: Error
Component: wcf / amweb_cfg_s_error
Name: amweb_cfg_m_invalid_keyfile
Number: 0x389d51d0 (949834192)
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0465E SSL environment could not be opened.
Error: %s.
Explanation: An internal SSL error occurred.
Action: The action to correct this problem depends on
details in the error message.
Name: amweb_cfg_m_open_gskenv_fail
Number: 0x389d51d1 (949834193)
DPWCF0469E The file ’%s’ could not be copied to
’%s’
Explanation: An error occurred when trying to copy a
file.
Action: Make sure the orginal file exists and the
directory for the new file exists. Make sure the file
system has sufficient space to copy the file. Make sure
the destination directory is writable.
Name: amweb_cfg_m_copy_file_fail
Number: 0x389d51d5 (949834197)
Severity: Error
Component: wcf / amweb_cfg_s_error
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0470E The directory ’%s’ could not be copied
to the directory ’%s’.
DPWCF0466E Port ’%s’ is already in use.
Explanation: The original directory or the path of the
new directory may not be existed.
Explanation: The provided port is already in use.
Action: Use a different port, or remove the service
that is using the port.
Name: amweb_cfg_m_port_inuse
Number: 0x389d51d2 (949834194)
Severity: Error
Component: wcf / amweb_cfg_s_error
236
Error Message Reference
Action: Make sure the orginal directory exists and the
path of the new directory also exists.
Name: amweb_cfg_m_copy_dir_fail
Number: 0x389d51d6 (949834198)
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0471E The directory ’%s’ could not be
created.
DPWCF0475E The specified document root directory
’%s’ does not exist.
Explanation: The path to the directory that want to be
created may be not existed in the system.
Explanation: The provided document root directory
does not exist.
Action: Make sure the path to the directory that want
to be created exists in the system.
Action: Make sure the document root directory exists
in the system.
Name: amweb_cfg_m_mkdir_fail
Name: amweb_cfg_m_docroot_notexist
Number: 0x389d51d7 (949834199)
Number: 0x389d51db (949834203)
Severity: Error
Severity: Error
Component: wcf / amweb_cfg_s_error
Component: wcf / amweb_cfg_s_error
DPWCF0472E The random password could not be
generated.
DPWCF0476E The specified option ’%s’ is invalid.
Explanation: Memory allocation operation failed.
Explanation: The specified option is invalid. Only the
flags in the usage message are valid.
Action: Check memory limits on your machine, and
increase availabel memory if possible
Action: The specified option is invalid. Use one of the
options from the usage and try again.
Name: amweb_cfg_m_genpwd_fail
Name: amweb_cfg_m_invalid_flag
Number: 0x389d51d8 (949834200)
Number: 0x389d51dc (949834204)
Severity: Error
Severity: Error
Component: wcf / amweb_cfg_s_error
Component: wcf / amweb_cfg_s_error
DPWCF0473E The WebSEAL instance ’%s’ failed to
configure.
DPWCF0477E The specified option ’%s’ needs a
parameter.
Explanation: WebSEAL instance cannot be configured
due to the error that displayed before this message
Explanation: The specified option must have a
parameter.
Action: Unconfigure this WebSEAL instance and run
configuration program again.
Action: Need to specify a parameter for the specified
action.
Name: amweb_cfg_m_config_server_fail
Name: amweb_cfg_m_invalid_parameter
Number: 0x389d51d9 (949834201)
Number: 0x389d51dd (949834205)
Severity: Error
Severity: Error
Component: wcf / amweb_cfg_s_error
Component: wcf / amweb_cfg_s_error
DPWCF0474E The WebSEAL instance ’%s’ failed to
unconfigure.
DPWCF0478E The ″action″ option needs to be
specified.
Explanation: WebSEAL instance cannot be
unconfigured due to the error that displayed before this
message
Explanation: The ″action″ option needs to be specified
to configure or unconfigure WebSEAL instance from
command line.
Action: Run unconfiguration program again.
Action: Need to specify the ″action″ option in the
command line inputs.
Name: amweb_cfg_m_unconfig_server_fail
Number: 0x389d51da (949834202)
Severity: Error
Component: wcf / amweb_cfg_s_error
Name: amweb_cfg_m_action_option_needed
Number: 0x389d51de (949834206)
Severity: Error
Component: wcf / amweb_cfg_s_error
Chapter 2. Tivoli Access Manager for e-business WebSEAL Messages
237
DPWCF0479E The specified certificate label ’%s’ is
invalid.
DPWCF0483E The entry ’%s’ in the response file
does not have a value
Explanation: The provided certificate label is incorrect.
Explanation: A needed entry in the response file did
not have a value.
Action: Make sure the certificate label is entered
correctly.
Name: amweb_cfg_m_invalid_cert_label
Number: 0x389d51df (949834207)
Severity: Error
Component: wcf / amweb_cfg_s_error
Action: Make sure that the value of the entry exists in
the response file.
Name: amweb_cfg_m_missing_entry_value
Number: 0x389d51e3 (949834211)
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0480E The response file ’%s’ could not be
opened.
Explanation: The provided response file does not
exist.
Action: Make sure the response file exists.
Name: amweb_cfg_m_open_rspfile_fail
DPWCF0484E Error: the configuration program must
be run as root.
Explanation: The configuration program needs to be
run as the root user in order to be able to function
properly.
Number: 0x389d51e0 (949834208)
Action: Run the configuration program as the root
user.
Severity: Error
Name: amweb_cfg_m_run_config_as_root
Component: wcf / amweb_cfg_s_error
Number: 0x389d51e4 (949834212)
Severity: Error
DPWCF0481E The instance name ’%s’ does not exist
to unconfigure.
Explanation: No instance with the provided name was
found on the system.
Action: Make sure the instance name was typed
correctly.
Name: amweb_cfg_m_ucfg_instance_not_ exist
Number: 0x389d51e1 (949834209)
Severity: Error
Component: wcf / amweb_cfg_s_error
Component: wcf / amweb_cfg_s_error
DPWCF0485E The ownership of ’%s’ cannot be
changed to user ivmgr, group ivmgr.
Error code: %d.
Explanation: An attempt to change the ownership of a
file or directory failed. The system error number can be
used to determine the cause of the failure.
Action: Make sure the file or directory exists.
Name: amweb_cfg_m_change_ownership_fail
Number: 0x389d51e5 (949834213)
DPWCF0482E Could not determine the hostname of
the machine. Error code: %d
Explanation: An error occurred when attempting to
determine the host name of the local system.
Action: Make sure the network configuration on the
machine is correct.
Name: amweb_cfg_m_gethostname_fail
Number: 0x389d51e2 (949834210)
Severity: Error
Component: wcf / amweb_cfg_s_error
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0486E Could not create symbolic link from
’%s’ to ’%s’. Error code: %d.
Explanation: An attempt to create a symbolic link
failed.
Action: Make sure the destination directory for the
symlink exists, and no file or directory exists in that
location already. Look up the system error code for
further information if necessary.
Name: amweb_cfg_m_make_symlink_fail
Number: 0x389d51e6 (949834214)
Severity: Error
238
Error Message Reference
Component: wcf / amweb_cfg_s_error
Action: Restart the machine and run the configuration
program again.
DPWCF0487E The hash table for configuration
options cannot be initialized.
Name: amweb_cfg_m_set_config_status_fail
Number: 0x389d51ea (949834218)
Explanation: The hash table can not be initialized
because the allocation of the options failed.
Action: Check memory limits on your machine, and
increase available memory if possible
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0491E The file ’%s’ could not be deleted.
Error code: %d.
Name: amweb_cfg_m_init_hashtable_fail
Number: 0x389d51e7 (949834215)
Explanation: An attempt to delete a file failed.
Severity: Error
Action: Make sure that the file and the directory
containing the file are both writable.
Component: wcf / amweb_cfg_s_error
Name: amweb_cfg_m_delete_file_fail
DPWCF0488E The file ’%s’ could not be moved to
’%s’
Explanation: An error occurred when trying to move
a file.
Action: Make sure the orginal file exists and the
directory for the new file exists. Make sure the file
system has sufficient space to move the file. Make sure
the destination directory is writable.
Name: amweb_cfg_m_move_file_fail
Number: 0x389d51e8 (949834216)
Number: 0x389d51eb (949834219)
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0492E The socket could not be created. Error
code: %d
Explanation: An error occured when attempting to
initialize a socket.
Action: Look up the system error code for additional
information. Check system resource limits on the
number of file descriptors, and increase the limits if
necessary.
Severity: Error
Component: wcf / amweb_cfg_s_error
Name: amweb_cfg_m_create_socket_fail
DPWCF0489E ERROR: For WebSEAL to function
correctly the maximum number of
threads per process should be at least
96. This value can be increased by
modifying the MAXTHREADPROC or
MAX_THREAD_PROC kernel parameter
via the sam utility.
Explanation: The MAXTHREADPROC or
MAX_THREAD_PROC must be greater than 96 for
WebSEAL to function correctly.
Action: Use the sam utility to increase the
MAXTHREADPROC or MAX_THREAD_PROC and
run the configuration program again.
Name: amweb_cfg_m_max_thread_proc_error
Number: 0x389d51ec (949834220)
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0493E \tThe ″-interactive″ option is not
supported on this platform.
Explanation: The amwebcfg utility does not support
the -interactive flag on Windows.
Action: Should not use interactive option for the
amwebcfg utility on windows
Name: amweb_cfg_m_interactive_notsupport
Number: 0x389d51ed (949834221)
Number: 0x389d51e9 (949834217)
Severity: Error
Severity: Error
Component: wcf / amweb_cfg_s_error
Component: wcf / amweb_cfg_s_error
DPWCF0490E The configuration status could not be
set.
Explanation: This problem should not occur. If it does
happen, the machine should be restarted and run the
configuration program again.
DPWCF0494E The executable file ’ldapsearch’ could
not be found.
Explanation: The installlation directory for the LDAP
client could not be found.
Chapter 2. Tivoli Access Manager for e-business WebSEAL Messages
239
Action: Make sure the LDAP client is installed
correctly.
Name: amweb_cfg_m_ldap_path_not_found
Number: 0x389d51ee (949834222)
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0495E The configuration value of an entry
[%s] ’%s’ could not be retrieved from
the configuration file ’%s’.
Explanation: An attempt to retrieve an entry from a
configuration file failed.
Action: Check logs for additional errors. The
configuration file may not exist or might not be
readable. The entry might not exist in the configuration
file.
Name: amweb_cfg_m_get_config_value_fail
Number: 0x389d51ef (949834223)
DPWCF0498E The user ’%s’ could not be removed
from the group ’%s’. Error message: ’%s’
Explanation: The function
ivadmin_group_removemember failed to remove the
user from the group because of the indicated error.
Action: Fix the problem indicated by the error
message.
Name: amweb_cfg_m_group_remove_member
Number: 0x389d51f2 (949834226)
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0499E The objectspace ’%s’ could not be
created. Error message: ’%s’
Explanation: The function ivadmin_objectspace_create
failed to create the objectspace because of the indicated
error.
Severity: Error
Action: Fix the problem indicated by the error
message.
Component: wcf / amweb_cfg_s_error
Name: amweb_cfg_m_objectspace_create
Number: 0x389d51f3 (949834227)
DPWCF0496E The user ’%s’ does not have
permission to unconfigure the server.
Explanation: Only Access Manager Administrators are
allowed to configure or unconfigure WebSEAL.
Action: Run the configuration program again,
supplying the ID and password of an Administrative
user.
Name: amweb_cfg_m_not_admin_privilege
Number: 0x389d51f0 (949834224)
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0497E The response file ’%s’ does not exist.
Explanation: The provided response file does not exist
or is not readable.
Action: Make sure the response file exists and is
readable.
Name: amweb_cfg_m_rspfile_not_exist
Number: 0x389d51f1 (949834225)
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0500E The ACL ’%s’ could not be created
with an error: ’%s’
Explanation: The function ivadmin_acl_create failed to
create the ACL because of the indicated error.
Action: Fix the problem indicated by the error
message.
Name: amweb_cfg_m_acl_create
Number: 0x389d51f4 (949834228)
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0501E The description of ACL ’%s’ could not
be set to ’%s’. Error message: ’%s’
Explanation: The function ivadmin_acl_setdescription
failed because of the indicated error.
Severity: Error
Action: Fix the problem indicated by the error
message.
Component: wcf / amweb_cfg_s_error
Name: amweb_cfg_m_acl_setdescription
Number: 0x389d51f5 (949834229)
Severity: Error
Component: wcf / amweb_cfg_s_error
240
Error Message Reference
DPWCF0502E The permissions for group ’%s’ in the
ACL ’%s’ could not be set. Error
message: ’%s’
Explanation: The function ivadmin_acl_setgroup failed
to set the group permissions because of the indicated
error.
Action: Fix the problem indicated by the error
message.
Number: 0x389d51f9 (949834233)
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0506E The ACL ’%s’ could not be attached to
the protected object ’%s’. Error message:
’%s’
Explanation: The function ivadmin_protobj_attachacl
failed to attach the acl to a protected object because of
the indicated error.
Name: amweb_cfg_m_acl_setgroup
Number: 0x389d51f6 (949834230)
Action: Fix the problem indicated by the error
message.
Severity: Error
Component: wcf / amweb_cfg_s_error
Name: amweb_cfg_m_protobj_attachacl
DPWCF0503E The permissions for user ’%s’ in the
ACL ’%s’ could not be set. Error
message: ’%s’
Explanation: The function ivadmin_acl_setuser failed
to set the user permissions because of the indicated
error.
Action: Fix the problem indicated by the error
message.
Number: 0x389d51fa (949834234)
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0507E The protected object ’%s’ could not be
created. Error message: ’%s’
Explanation: The function ivadmin_protobj_create
failed to create a protected object because of the
indicated error.
Name: amweb_cfg_m_acl_setuser
Number: 0x389d51f7 (949834231)
Action: Fix the problem indicated by the error
message.
Severity: Error
Name: amweb_cfg_m_protected_object_ create
Component: wcf / amweb_cfg_s_error
Number: 0x389d51fb (949834235)
DPWCF0504E The permissions for anyother in the
ACL ’%s’ could not be set. Error
message: ’%s’
Severity: Error
Component: wcf / amweb_cfg_s_error
Explanation: The function ivadmin_acl_setanyother
failed to set the permissions for anyother because of the
indicated error.
DPWCF0508E The protected object ’%s’ could not be
deleted. Error message: ’%s’
Action: Fix the problem indicated by the error
message.
Explanation: The function ivadmin_protobj_create
failed to delete the protected object because of the
indicated error.
Name: amweb_cfg_m_acl_setanyother
Number: 0x389d51f8 (949834232)
Action: Fix the problem indicated by the error
message.
Severity: Error
Name: amweb_cfg_m_protected_object_ delete
Component: wcf / amweb_cfg_s_error
Number: 0x389d51fc (949834236)
Severity: Error
DPWCF0505E The permissions for unauthenticated
in the ACL ’%s’ could not be set to ’%s’.
Error message: ’%s’
Explanation: The function ivadmin_acl_setunauth
failed to set the permissions for unauthenticated
because of the indicated error.
Action: Fix the problem indicated by the error
message.
Name: amweb_cfg_m_acl_setunauth
Component: wcf / amweb_cfg_s_error
DPWCF0509E The group ’%s’ could not be retrieved.
Error message: ’%s’
Explanation: The function ivadmin_group_get fails to
retrieve the group because of the indicated error.
Action: Fix the problem indicated by the error
message.
Chapter 2. Tivoli Access Manager for e-business WebSEAL Messages
241
Name: amweb_cfg_m_group_get
Severity: Error
Number: 0x389d51fd (949834237)
Component: wcf / amweb_cfg_s_error
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0510E The group ’%s’ could not be created.
Error message: ’%s’
Explanation: The function ivadmin_group_create
failed to create a group because of the indicated error.
Action: Fix the problem indicated by the error
message.
DPWCF0514E The ivadmin context could not be
created. Error message ’%s’. Use
pdadmin to manually create ’su-admins’
and ’su-excluded’ groups as instructed
in the appendix of WebSEAL upgrade
document.
Explanation: The function
ivadmin_context_createdefault2 failed because of the
indicated error.
Name: amweb_cfg_m_group_create
Action: Fix the problem indicated by the error
message.
Number: 0x389d51fe (949834238)
Name: amweb_cfg_m_create_context_ fail_su_groups
Severity: Error
Number: 0x389d5202 (949834242)
Component: wcf / amweb_cfg_s_error
Severity: Error
DPWCF0511E The descript for group ’%s’ could not
be set to ’%s’. Error message: ’%s’
Explanation: The function
ivadmin_group_setdescription failed because of the
indicated error.
Action: Fix the problem indicated by the error
message.
Component: wcf / amweb_cfg_s_error
DPWCF0515E Use pdadmin to manually create
’su-admins’ or ’su-excluded’ groups as
instructed in the appendix of WebSEAL
upgrade document.
Name: amweb_cfg_m_group_setdescription
Explanation: The ’su-admins’ or ’su-groups’ could not
be created in the upgrade process. It should be created
manually.
Number: 0x389d51ff (949834239)
Action: Fix the problem indicated by the message.
Severity: Error
Name: amweb_cfg_m_create_su_groups_fail
Component: wcf / amweb_cfg_s_error
Number: 0x389d5203 (949834243)
Severity: Error
DPWCF0512E The DN of the group ’%s’ could not
be retrieved. Error message: ’%s’
Component: wcf / amweb_cfg_s_error
Explanation: The function ivadmin_group_getdn
failed because of the indicated error.
DPWCF0516E The tivoli_common_dir entry in the
log.properties file has an empty value.
Action: Fix the problem indicated by the error
message.
Explanation: The tivoli_common_dir entry must
contain Tivoli Common Directory in log.properties file
if Tivoli Common Directory is used.
Name: amweb_cfg_m_get_group_dn
Number: 0x389d5200 (949834240)
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0513E The directory ’%s’ could not be
deleted.
Explanation: The directory may not exist.
Action: Make sure the directory exists.
Name: amweb_cfg_m_delete_dir_fail
Number: 0x389d5201 (949834241)
242
Error Message Reference
Action: Add a Tivoli Common Directory to
tivoli_common_dir entry in log.properties file.
Name: amweb_cfg_m_tcd_log_prop_empty
Number: 0x389d5204 (949834244)
Severity: Error
Component: wcf / amweb_cfg_s_error
DPWCF0517E The log.properties file does not exist.
Explanation: The log.properties file must exist in
Tivoli Common Directory if Tivoli Common Directory
is used.
DPWCF0521E The ’%s’ option only uses ’y’ or ’n’ for
its parameter.
Explanation: The option displayed in the message
requires ’y’ or ’n’ for its value.
Action: Make sure the log.properties file exists in
Tivoli Common Directory.
Action: Need to provide ’y’ or ’n’ as the value of the
option displayed in the message on the command line.
Name: amweb_cfg_m_tcd_log_prop_not_exist
Name: amweb_cfg_m_invalid_yn_parameter
Number: 0x389d5205 (949834245)
Number: 0x389d5209 (949834249)
Severity: Error
Severity: Error
Component: wcf / amweb_cfg_s_error
Component: wcf / amweb_cfg_s_error
DPWCF0518E Failed to create Tivoli Common
Directory for WebSEAL.
DPWCF0522E The administrator ID or password is
invalid.
Explanation: An error occurred when creating Tivoli
Common Directory for WebSEAL.
Explanation: A valid administrator ID and valid
password are required to configure WebSEAL.
Action: The action to correct this problem depends on
details displayed in previous error messages.
Action: Make sure that the administrator ID and
password provided are correct.
Name: amweb_cfg_m_create_tcd_for_ web_fail
Name: amweb_cfg_m_invalid_admin_idorpwd
Number: 0x389d5206 (949834246)
Number: 0x389d520a (949834250)
Severity: Error
Severity: Error
Component: wcf / amweb_cfg_s_error
Component: wcf / amweb_cfg_s_error
DPWCF0519E Failed to relocate Tivoli Common
Directory for WebSEAL.
DPWNS0150E Process can’t access directory ’%s’,
error: 0x%8.8lx
Explanation: An error occurred when relocating the
Tivoli Common Directory for WebSEAL.
Explanation: The process is trying to change it’s
working directory
Action: The action to correct this problem depends on
details displayed in previous error messages.
Action: Check the UID running the process has the
correct permissions
Name: amweb_cfg_m_relocate_tcd_for_ web_fail
Name: nsupper_s_chdir_error
Number: 0x389d5207 (949834247)
Number: 0x38b9a096 (951689366)
Severity: Error
Severity: Error
Component: wcf / amweb_cfg_s_error
Component: wns / nsupper_s_general
DPWCF0520E The ’%s’ option must be provided on
the command line.
DPWNS0165E The certificate revocation check result
was undetermined. The subject issuer is
’%s’.
Explanation: The option displayed in the message
must be provided in the command line in order to
successfully configure WebSEAL.
Action: Provide the option displayed in the message
on the command line.
Explanation: An OCSP CRL check could not
determine if the certificate is revoked. This is usually
due to an unresponsive OCSP responder.
Action: Check the OCSP responder is operating.
Name: amweb_cfg_m_missing_option
Name: nsupper_cert_rev_check_undetermined_
Number: 0x389d5208 (949834248)
Number: 0x38b9a0a5 (951689381)
Severity: Error
Severity: Error
Component: wcf / amweb_cfg_s_error
Component: wns / nsupper_s_general
Chapter 2. Tivoli Access Manager for e-business WebSEAL Messages
243
DPWNS0166E The junction server, ’%s’, certificate
revocation check result was
undetermined. The subject issuer is
’%s’.
Explanation: An OCSP CRL check could not
determine if the junctions certificate is revoked. This is
usually due to an unresponsive OCSP responder.
Action: Check the OCSP responder is operating.
Number: 0x38b9a1c3 (951689667)
Severity: Error
Component: wns / nsupper_s_mimetype
DPWNS0452E Invalid MIME type ’%s’.
Explanation: An attempt was made to lookup a match
for a MIME type that did not contain a ’/’.
Number: 0x38b9a0a6 (951689382)
Action: Check the MIME type configuration of your
servers to verify that they are returning valid MIME
types for all documents.
Severity: Error
Name: mimetype_s_invalid_type
Component: wns / nsupper_s_general
Number: 0x38b9a1c4 (951689668)
Name: nsupper_jct_cert_rev_check_ undetermined
Severity: Error
DPWNS0301W Junction server ’%s:%d’ is
renegotiating SSL sessions at a rate of
%d per minute.
Explanation: The SSL server junctioned behind
WebSEAL is forcing WebSEAL to renegotiate new SSL
Sessions at a rate higher than specified by [junction]
jct-ssl-reneg-warning-rate.
Action: Ensure the junctioned SSL server has SSL
session caching enabled and functioning correctly, or
check that any intervening load balancers are not
causing this issue by forcing WebSEAL to alternate
between two SSL servers.
Component: wns / nsupper_s_mimetype
DPWNS0453E Invalid MIME type.
Explanation: An attempt was made to lookup a match
for a MIME type that did not contain a ’/’.
Action: Check the MIME type configuration of your
servers to verify that they are returning valid MIME
types for all documents.
Name: mimetype_s_invalid_type_noarg
Number: 0x38b9a1c5 (951689669)
Name: ws_ssl_jct_reneg_too_fast
Severity: Error
Number: 0x38b9a12d (951689517)
Component: wns / nsupper_s_mimetype
Severity: Warning
Component: wns / nsupper_s_io
DPWNS0600E Compression initialization failed with
error code %d (%s).
DPWNS0450E The pattern ’%s’ is not a valid MIME
type matching pattern.
Explanation: Initialization of compression failed. This
error should never occur.
Explanation: MIME type patterns must be either exact
(type/subtype), subtype wild cards (type/*), or type
and subtype wildcards (*/*).
Action: Contact an IBM support representative.
Action: Make sure the mime type specified is valid.
Name: mimetype_s_invalid_pattern
Number: 0x38b9a1c2 (951689666)
Severity: Error
Name: compress_s_init_error
Number: 0x38b9a258 (951689816)
Severity: Error
Component: wns / nsupper_s_compress
Component: wns / nsupper_s_mimetype
DPWNS0601E Compression failed with error code
%d (%s).
DPWNS0451E Invalid MIME matching pattern.
Explanation: Compression of a document failed. This
error should never occur.
Explanation: Mime type patterns must be either exact
(type/subtype), subtype wild cards (type/*), or type
and subtype wildcards (*/*).
Action: Make sure the mime type specified is valid.
Name: mimetype_s_invalid_pattern_noarg
244
Error Message Reference
Action: Contact an IBM support representative.
Name: compress_s_deflate_error
Number: 0x38b9a259 (951689817)
Severity: Error
Component: wns / nsupper_s_compress
DPWNS0602E Completion of compression failed
with error code %d (%s).
Explanation: The completion of document
compression failed. This error should never occur.
Name: amweb_s_ses_update_failed
Number: 0x38b9a41b (951690267)
Severity: Error
Component: wns / nsupper_s_session
Action: Contact an IBM support representative.
Name: compress_s_end_error
DPWNS1052W A session cache entry was not found.
Number: 0x38b9a25a (951689818)
Explanation: This message indicates that an expected
session cache entry was not found.
Severity: Error
Action: No action is necessary unless other problems
are experienced.
Component: wns / nsupper_s_compress
DPWNS0603E An error occured during document
compression.
Explanation: This error is returned when a problem
was encountered during document compression.
Name: amweb_s_ses_not_found
Number: 0x38b9a41c (951690268)
Severity: Warning
Component: wns / nsupper_s_session
Action: Examine log files for additional information.
Name: compress_s_generic_error
DPWNS1053E Session owner tracking is not
supported in this configuration.
Number: 0x38b9a25b (951689819)
Explanation: This message indicates that an attempt
was made to get a list of the sessions associated with a
user when session owner tracking was not enabled.
Severity: Error
Component: wns / nsupper_s_compress
DPWNS0750E The HTTP header key ’%d’ is invalid.
Explanation: This message indicates an internal error.
An attempt was made to reference an HTTP header
using an invalid key.
Action: Contact an IBM support representative.
Action: Refer to the TAM WebSEAL Administration
Guide for instructions on how to enable tracking of
session owners.
Name: amweb_s_ses_owner_not_supported
Number: 0x38b9a41d (951690269)
Severity: Error
Name: amweb_s_http_invalid_header_key
Component: wns / nsupper_s_session
Number: 0x38b9a2ee (951689966)
Severity: Error
DPWNS1054E Invalid session ID.
Component: wns / nsupper_s_http
Explanation: This message indicates that an invalid
session ID was encountered when trying to generate an
internal representation of the ID. The most likely cause
of this error is a malformed session cookie from a
browser.
DPWNS1050E Session cache creation failed.
Explanation: This message can indicate a failure due
to system resource limitations.
Action: Check available system memory and process
resource usage limits.
Name: amweb_s_ses_cache_creation_failed
Action: No action is necessary. A new session and
session cookie is created as needed.
Name: amweb_s_ses_invalid_id
Number: 0x38b9a41e (951690270)
Number: 0x38b9a41a (951690266)
Severity: Error
Severity: Error
Component: wns / nsupper_s_session
Component: wns / nsupper_s_session
Explanation: This message indicates an internal error.
DPWNS1055E You are already logged in from
another client. You can either wait for
the other login to end or contact your
local support personnel to cancel the
existing login.
Action: Contact your IBM service representative.
Explanation: This message indicates that the
DPWNS1051E Addition or update of a session cache
entry failed.
Chapter 2. Tivoli Access Manager for e-business WebSEAL Messages
245
maximum number of concurrent sessions for the user
has been reached and no new sessions will be
permitted until one of the existing sessions has ended.
Action: Refer to the TAM WebSEAL Administration
Guide discussion of concurrent login sessions for more
complete information.
Name: amweb_s_ses_limit_reached
Number: 0x38b9a41f (951690271)
Severity: Error
Component: wns / nsupper_s_session
Action: Make sure the correct protocol, host name,
and port for the SMS in the WebSEAL configuration file
are correct. Make sure the SMS server is running and
can be reached from the WebSEAL server machine.
Make sure the SMS server is configured to host the
specified replica set. Check the log file for additional
errors. If necessary, look up the error code from the
message in the TAM Problem Determination Guide for
additional troubleshooting steps.
Name: amweb_s_ses_dsess_join_failed
Number: 0x38b9a422 (951690274)
Severity: Error
DPWNS1056W You are already logged in from
another client. Do you want to terminate
your existing login or cancel this new
login request?
Explanation: This message indicates that the
maximum number of concurrent sessions for the user
has been reached, and that the user can choose to
replace an existing session.
Action: The action depends on the reason for the
previous session. If the user closed their browser
without properly logging out or does not need their old
session, they can press the ’Terminate existing login’
button. If the user does need their old session, they
should press the ’Cancel this new login’ button.
Name: amweb_s_ses_limit_needs_override
Number: 0x38b9a420 (951690272)
Severity: Warning
Component: wns / nsupper_s_session
DPWNS1057E Unable to intialize the distributed
session API (error code 0x%08x)
Explanation: Initialization of the distributed session
API failed. This error should never occur. The error
code in the message might reveal more information
about the problem.
Action: Look up the error code included in the
message in the TAM Problem Determination Guide.
Name: amweb_s_ses_dsess_init_failed
Number: 0x38b9a421 (951690273)
Severity: Error
Component: wns / nsupper_s_session
DPWNS1058E Unable to join the replica set ’%s’
(error code 0x%08x)
Explanation: The WebSEAL server attempted to join a
particular replica set but the operation failed. The SMS
might not be available, or may have prevented the
WebSEAL server from joining the replica set for some
reason.
246
Error Message Reference
Component: wns / nsupper_s_session
DPWNS1059E Unable to shut down the distributed
session API (error code 0x%08x)
Explanation: Shutdown of the distributed session API
failed. This error should never occur. The error code in
the message might reveal more information about the
problem.
Action: Look up the error code included in the
message in the TAM Problem Determination Guide.
Name: amweb_s_ses_dsess_shutdown_failed
Number: 0x38b9a423 (951690275)
Severity: Error
Component: wns / nsupper_s_session
DPWNS1060E Unable to leave the replica set ’%s’
(error code 0x%08x)
Explanation: The WebSEAL server attempted to leave
a particular replica set but the operation failed. The
SMS might not be available or there might have been
another problem when leaving the replica set.
Action: Look up the error code included in the
message in the TAM Problem Determination Guide.
Name: amweb_s_ses_dsess_leave_failed
Number: 0x38b9a424 (951690276)
Severity: Error
Component: wns / nsupper_s_session
DPWNS1061E An attempt to create a session failed
with error code 0x%08x.
Explanation: An attempt to create a session at the
SMS failed.
Action: Repeat the operation. If the problem continues
to occur, look up the error code included in the
message in the TAM Problem Determination Guide. If
the action recommended for the error code still does
not resolve the problem, contact your IBM service
representative for assistance.
Name: amweb_s_ses_dsess_create_failed
DPWNS1065E Unknown replica set.
Number: 0x38b9a425 (951690277)
Explanation: An attempt was made to locate a replica
set that was not configured.
Severity: Error
Component: wns / nsupper_s_session
DPWNS1062E An attempt to update a session failed
with error code 0x%08x.
Explanation: An attempt to update a session at the
SMS failed.
Action: Repeat the operation. If the problem continues
to occur, look up the error code included in the
message in the TAM Problem Determination Guide. If
the action recommended for the error code still does
not resolve the problem, contact your IBM service
representative for assistance.
Name: amweb_s_ses_dsess_update_failed
Number: 0x38b9a426 (951690278)
Action: Check that the replica set requested is
included in the WebSEAL configuration file as a replica
set that the WebSEAL server should join.
Name: amweb_s_ses_unknown_replica_ set_noarg
Number: 0x38b9a429 (951690281)
Severity: Error
Component: wns / nsupper_s_session
DPWNS1066E An error with code 0x%08x occurred
when decoding a session from the SMS.
Explanation: An attempt to decode a session from the
SMS failed.
Action: Look up the error code included in the
message in the TAM Problem Determination Guide.
Severity: Error
Name: amweb_s_ses_decode_error
Component: wns / nsupper_s_session
Number: 0x38b9a42a (951690282)
DPWNS1063E An attempt to delete a session failed
with error code 0x%08x.
Explanation: An attempt to delete a session at the
SMS failed.
Action: Repeat the operation. If the problem continues
to occur, look up the error code included in the
message in the TAM Problem Determination Guide. If
the action recommended for the error code still does
not resolve the problem, contact your IBM service
representative for assistance.
Name: amweb_s_ses_dsess_delete_failed
Number: 0x38b9a427 (951690279)
Severity: Error
Component: wns / nsupper_s_session
Action: Check that the replica set requested is
included in the WebSEAL configuration file as a replica
set that the WebSEAL server should join.
Severity: Error
Component: wns / nsupper_s_session
DPWNS1067E An attempt to generate a new external
session ID failed with error code
0x%08x.
Explanation: An attempt to generate a new external
session ID for a session failed.
Action: Repeat the operation. If the problem continues
to occur, look up the error code included in the
message in the TAM Problem Determination Guide. If
the action recommended for the error code still does
not resolve the problem, contact your IBM service
representative for assistance.
Number: 0x38b9a42b (951690283)
Explanation: An attempt was made to locate a replica
set that was not configured.
Number: 0x38b9a428 (951690280)
Component: wns / nsupper_s_session
Name: amweb_s_ses_generate_error
DPWNS1064E Unknown replica set ’%s’
Name: amweb_s_ses_unknown_replica_set
Severity: Error
Severity: Error
Component: wns / nsupper_s_session
DPWNS1068E An attempt to register an
authentication failure for user ’%s’
failed with status code 0x%08x.
Explanation: An attempt to notify the SMS of an
authentication failure was unsuccessful.
Action: Check the log file for additional errors. If
necessary, look up the error code from the message in
the TAM Problem Determination Guide for additional
troubleshooting steps.
Name: amweb_s_ses_reg_auth_failure_error
Chapter 2. Tivoli Access Manager for e-business WebSEAL Messages
247
Number: 0x38b9a42c (951690284)
Severity: Error
Component: wns / nsupper_s_session
DPWNS1069I Session generated from single-sign-on.
Explanation: The SMS returned a session to WebSEAL
that was not generated by this replica set. The
WebSEAL server may need to modify the session before
using it.
Action: No action is necessary, the server will
automatically make any necessary changes.
Name: amweb_s_ses_single_sign_on
Number: 0x38b9a42d (951690285)
Severity: Notice
Component: wns / nsupper_s_session
DPWNS1070E Session version mismatch while
deserializing session data.
Explanation: WebSEAL attempted to deserialize
session data but encountered an invalid session version.
This indicates that the session was not compatible with
the WebSEAL server that generated this error. The
session was discarded.
DPWNS1072W WebSEAL received notification that
the SMS session cache for replica-set
’%s’ was cleared. All local references to
sessions are being discarded to
synchronize the local session cache with
the SMS session cache.
Explanation: The SMS notified the WebSEAL server
that the SMS session cache was lost. Any sessions
remaining on the WebSEAL server are no longer valid
and will be removed. This message will also be
displayed when the WebSEAL server first regains
contact with the SMS after WebSEAL is restarted.
Action: No action is necessary.
Name: amweb_s_ses_sms_restarted
Number: 0x38b9a430 (951690288)
Severity: Warning
Component: wns / nsupper_s_session
DPWNS1200W The application server you are
accessing has been taken offline by the
system administrator.
Explanation: The application server being accessed
has been taken offline or throttled by the system
administrator.
Action: No action is necessary. A new session will be
created as needed. Refer to the documentation for the
server that generated the invalid session version for
information on compatibility with the WebSEAL server
that generated this error.
Action: Try again at a later time or contact the system
administrator for more information.
Name: amweb_s_ses_version_mismatch
Severity: Warning
Number: 0x38b9a42e (951690286)
Component: wns / nsupper_s_httperrs
Name: amweb_s_appserver_offline
Number: 0x38b9a4b0 (951690416)
Severity: Error
Component: wns / nsupper_s_session
DPWNS1201E The server is temporarily unable to
service your request. Please try again
later.
DPWNS1071E The max-concurrent-web-sessions
policy value of ’%d’ is invalid.
Explanation: The WebSEAL server is unable to service
a request because a needed resource is unavailable.
Explanation: The max-concurrent-web-sessions policy
returned from the Access Manager Runtime had an
unexpected value. A default value of ’unlimited’ has
been assumed.
Action: The WebSEAL server log file will have more
detailed information about why the WebSEAL server is
unable to service the request. Check the WebSEAL
server log file and correct the problem.
Action: Reset the max-concurrent-web-sessions policy
for the user. If the problem is not resolved, contact an
IBM support representative.
Name: amweb_s_service_unavailable
Name: amweb_s_ses_invalid_ses_policy
Severity: Error
Number: 0x38b9a42f (951690287)
Component: wns / nsupper_s_httperrs
Severity: Error
Component: wns / nsupper_s_session
248
Error Message Reference
Number: 0x38b9a4b1 (951690417)
DPWNS1350W Failed to load ARM library ’%s’:
error code %d: error message ’%s’. ARM
support will be disabled.
Explanation: WebSEAL attempted to dynamically load
the ARM shared library and failed.
Action: Check the shared library name is correct and
present on the system. Refer to the error message for
more specific information. The shared library name is
specified by the library entry under the [arm] stanza. If
loading the ARM library is not desired set enable = no
under the [arm] stanza.
Name: wsarm_shlib_load_failed
Number: 0x38b9a546 (951690566)
Severity: Warning
Explanation: WebSEAL was unable to register the
transaction with ARM.
Action: Check ARM setup. Refer to the error message
for more specific information.
Name: wsarm_tran_registration_failed
Number: 0x38b9a549 (951690569)
Severity: Warning
Component: wns / nsupper_s_arm
DPWNS1354W Failed to start WebSEAL as an ARM
application: error code %d: error
message ’%s’. ARM support will be
disabled.
Explanation: WebSEAL was unable to start as an ARM
application.
Component: wns / nsupper_s_arm
DPWNS1351W ARM library is missing function
’%s’: error code %d: error message ’%s’.
ARM support will be disabled.
Explanation: WebSEAL dynamically loaded the ARM
shared library and can not find a required function in
it.
Action: Check the shared library name is correct.
Refer to the error message for more specific
information. The shared library name is specified by
the library entry under the [arm] stanza.
Action: Check ARM setup. Refer to the error message
for more specific information.
Name: wsarm_app_start_failed
Number: 0x38b9a54a (951690570)
Severity: Warning
Component: wns / nsupper_s_arm
DPWNS1355I ARM support detected and initialized
successfully.
Explanation: WebSEAL successfully started as an
ARM application.
Name: wsarm_shlib_missing_function
Number: 0x38b9a547 (951690567)
Action: None required.
Severity: Warning
Name: wsarm_support_started
Component: wns / nsupper_s_arm
Number: 0x38b9a54b (951690571)
DPWNS1352W Failed to register the WebSEAL
application with ARM: error code %d:
error message ’%s’. ARM support will
be disabled.
Severity: Notice
Component: wns / nsupper_s_arm
Explanation: WebSEAL was unable to register itself
with ARM.
DPWNS1356W Failed to stop WebSEAL running as
an ARM application: error code %d:
error message ’%s’.
Action: Check ARM setup is operational. Refer to the
error message for more specific information.
Explanation: WebSEAL was unable to stop running as
an ARM application using arm_stop_application().
Name: wsarm_app_registration_failed
Number: 0x38b9a548 (951690568)
Action: Refer to the error message for more specific
information.
Severity: Warning
Name: wsarm_app_stop_failed
Component: wns / nsupper_s_arm
Number: 0x38b9a54c (951690572)
Severity: Warning
DPWNS1353W Failed to register WebSEAL
transaction ’%s’ with ARM: error code
%d: error message ’%s’. ARM support
will be disabled.
Component: wns / nsupper_s_arm
Chapter 2. Tivoli Access Manager for e-business WebSEAL Messages
249
DPWNS1357W Failed to unregister the WebSEAL
application from ARM: error code %d:
error message ’%s’.
Explanation: WebSEAL was unable to unregister as an
ARM application using arm_destroy_application().
Action: Refer to the error message for more specific
information.
Name: wsarm_app_destroy_failed
Number: 0x38b9a54d (951690573)
Severity: Warning
Component: wns / nsupper_s_arm
DPWNS1358W Failed to get ARM transaction ’%s’
arrival time: error code %d: error
message ’%s’.
Explanation: The call to ARM function
arm_get_arrival_time() failed unexpectedly. The
transaction will not be reported.
Action: Refer to the error message for more specific
information.
Name: wsarm_get_arrival_time_failed
Number: 0x38b9a54e (951690574)
Severity: Warning
Component: wns / nsupper_s_arm
Number: 0x38b9a550 (951690576)
Severity: Warning
Component: wns / nsupper_s_arm
DPWNS1361W Failed to start ARM transaction ’%s’:
error code %d: error message ’%s’. The
transaction will not be reported.
Explanation: The call to ARM function
arm_start_transaction() failed unexpectedly. The
transaction will not be reported.
Action: ARM can limit the number of concurrent
transactions being reported. It may be possible to
increase the limit. Also refer to the error message for
more specific information.
Name: wsarm_start_transaction_failed
Number: 0x38b9a551 (951690577)
Severity: Warning
Component: wns / nsupper_s_arm
DPWNS1362W Failed to stop ARM transaction ’%s’:
error code %d: error message ’%s’.
Explanation: The call to ARM function
arm_stop_transaction() failed unexpectedly.
Action: Refer to the error message for more specific
information.
Name: wsarm_stop_transaction_failed
DPWNS1359W Failed to get the length of an ARM
correlator: error code %d: error message
’%s’.
Explanation: The call to ARM function
arm_get_correlator_length() failed unexpectedly. The
correlator will not be used.
Action: Refer to the error message for more specific
information.
Name: wsarm_get_correlator_len_failed
Number: 0x38b9a54f (951690575)
Severity: Warning
Component: wns / nsupper_s_arm
Number: 0x38b9a552 (951690578)
Severity: Warning
Component: wns / nsupper_s_arm
DPWNS1363W Unable to start ARM transaction
reporting as ARM initialization failed.
See log files for more information.
Explanation: The ’arm on’ command cannot complete
as the ARM initialization failed.
Action: Examine the log files for the reason ARM
initization failed. Correct this, restart WebSEAL and try
again.
Name: wsarm_s_unable_to_start_init_ failed
DPWNS1360W An invalid correlator string was
passed to WebSEAL: ’%s’. It will not be
used for subsequent transactions.
Number: 0x38b9a553 (951690579)
Severity: Warning
Explanation: An ARMCorrelator header was received
by WebSEAL with an invalid value.
Component: wns / nsupper_s_arm
Action: Check the application making the request to
WebSEAL. Or disable WebSEAL from using incoming
ARM Correlator by setting accept-correlators = no in
the [arm] stanza.
DPWNS1364W Unable to start ARM transaction
reporting as WebSEAL ARM support
has been disabled.
Name: wsarm_invalid_correlator_string
250
Error Message Reference
Explanation: The ’arm on’ command cannot complete
as the WebSEAL ARM support has been disabled in the
configuration file.
Component: wns / nsupper_s_arm
Action: To enable ARM support set enable = yes in
the [arm] stanza and restart WebSEAL.
DPWNS1368W Unable to start ARM transaction
reporting as WebSEAL ARM support
has been disabled.
Name: wsarm_s_unable_to_start_disabled
Explanation: The ’arm on’ command cannot complete
as the WebSEAL ARM support has been disabled in the
configuration file.
Number: 0x38b9a554 (951690580)
Severity: Warning
Component: wns / nsupper_s_arm
Action: To enable ARM support set enable-arm = yes
in the [arm] stanza and restart WebSEAL.
DPWNS1365W ARM transaction reporting is already
on.
Name: wsarm_s_unable_to_start_disabled2
Explanation: The ’arm on’ command is redundant and
will be ignored as arm transaction reporting is already
on.
Action: Don’t run the ’arm on’ command while
transaction reporting is on.
Severity: Warning
Component: wns / nsupper_s_arm
DPWNS1500E The interface ’%s’, defined in the [%s]
stanza, contains an invalid value for
’%s’. You must specify either ’http’ or
’https’.
Name: wsarm_s_already_started
Number: 0x38b9a555 (951690581)
Explanation: The web-http-protocol and
web-https-protocol interface settings can only contain
’http’ or ’https’.
Severity: Warning
Component: wns / nsupper_s_arm
DPWNS1366W ARM transaction reporting is already
off.
Explanation: The ’arm off’ command is redundant and
will be ignored as arm transaction reporting is already
off.
Action: Set the value to either ’http’ or ’https’
Name: wsinterface_illegal_protocol_value
Number: 0x38b9a5dc (951690716)
Severity: Fatal
Component: wns / nsupper_s_interface
Action: Don’t run the ’arm off’ command while
transaction reporting is off.
DPWNS1501E The option ’%s’, defined in the [%s]
stanza, contains an invalid value. You
must specify either ’http’ or ’https’.
Name: wsarm_s_already_stopped
Number: 0x38b9a556 (951690582)
Explanation: The web-http-protocol and
web-https-protocol settings can only contain ’http’ or
’https’.
Severity: Warning
Component: wns / nsupper_s_arm
DPWNS1367W Failed to load ARM library ’%s’:
error code %d: error message ’%s’. ARM
support will be disabled.
Explanation: WebSEAL attempted to dynamically load
the ARM shared library and failed.
Action: Check the shared library name is correct and
present on the system. Refer to the error message for
more specific information. The shared library name is
specified by the library entry under the [arm] stanza. If
loading the ARM library is not desired set enable-arm
= no under the [arm] stanza.
Name: wsarm_shlib_load_failed2
Number: 0x38b9a558 (951690584)
Action: Set the value to either ’http’ or ’https’
Name: wssystem_illegal_protocol_value
Number: 0x38b9a5dd (951690717)
Severity: Fatal
Component: wns / nsupper_s_interface
DPWNS1502E The option ’%s’ defined in the [%s]
stanza contains an invalid port value.
Explanation: The port value provided is either out of
the valid range, or is not a number.
Number: 0x38b9a557 (951690583)
Action: Provide a valid value for a TCP/IP port in the
range 1 to 65535.
Severity: Warning
Name: wssystem_illegal_port_value
Chapter 2. Tivoli Access Manager for e-business WebSEAL Messages
251
Number: 0x38b9a5de (951690718)
Severity: Fatal
Component: wns / nsupper_s_interface
252
Error Message Reference
Chapter 3. Tivoli Access Manager for e-business Plug-in for
Web Servers Messages
This chapter describes the messages provided by Tivoli Access Manager for
e-business Plug-in for Web Servers.
AMZCO0001I Tivoli Access Manager is configured
to use an LDAP user registry.
Explanation: This message is for informational
purposes only - no action is required.
Name: pdwpi_m_config_reg_domino
Number: 0x35e1e004 (903995396)
Severity: Notice
Component: pco / pd_wpi_config_s
Action: No action is required.
Name: pdwpi_m_config_reg_ldap
Number: 0x35e1e001 (903995393)
Severity: Notice
Component: pco / pd_wpi_config_s
AMZCO0002I Tivoli Access Manager is configured
to use an Active Directory single
domain user registry.
Explanation: This message is for informational
purposes only - no action is required.
Action: No action is required.
AMZCO0005W The Tivoli Access Manager user
registry type could not be determined.
Explanation: The type of user registry that Tivoli
Access Manager has been configured to use could not
be determined.
Action: Ensure that the Tivoli Access Manager runtime
environment is correctly configured.
Name: pdwpi_m_config_reg_unknown
Number: 0x35e1e005 (903995397)
Severity: Warning
Component: pco / pd_wpi_config_s
Name: pdwpi_m_config_reg_ad_single
Number: 0x35e1e002 (903995394)
Severity: Notice
Component: pco / pd_wpi_config_s
AMZCO0003I Tivoli Access Manager is configured
to use an Active Directory multiple
domain user registry with primary
domain %s.
Explanation: This message is for informational
purposes only - no action is required.
AMZCO0067I The server could not be started.
Explanation: The Tivoli Access Manager Plug-in for
Web Servers authorization server could not be started.
Action: Examine the Tivoli Access Manager Plug-in
for Web Servers authorization server log file for
detailed error information.
Name: pdwpi_m_config_fail_start
Number: 0x35e1e043 (903995459)
Severity: Notice
Component: pco / pd_wpi_config_s_rc
Action: No action is required.
Name: pdwpi_m_config_reg_ad_multi
AMZCO0074I Starting the server.
Number: 0x35e1e003 (903995395)
Explanation: This message is informational.
Severity: Notice
Action: No action is required.
Component: pco / pd_wpi_config_s
Name: pdwpi_m_config_start_server
Number: 0x35e1e04a (903995466)
AMZCO0004I Tivoli Access Manager is configured
to use a Lotus Domino user registry.
Severity: Notice
Explanation: This message is for informational
purposes only - no action is required.
Component: pco / pd_wpi_config_s_rc
Action: No action is required.
AMZCO0075E The server could not be started.
© Copyright IBM Corp. 2001, 2008
253
Explanation: The Tivoli Access Manager Plug-in for
Web Servers authorization server could not be started
the configuration program. This message is
informational.
Action: Examine earlier messages to determine the
reason why the Tivoli Access Manager Plug-in for Web
Servers authorization server could not be started and
take appropriate action.
Name: pdwpi_s_config_start_server_error
Number: 0x35e1e04b (903995467)
Severity: Error
Component: pco / pd_wpi_config_s_rc
Component: pco / pd_wpi_config_s_rc
AMZCO0080E The server could not be started.
Explanation: The Tivoli Access Manager Plug-in for
Web Servers authorization server could not be started
the configuration program. This message is
informational.
Action: Examine earlier messages to determine the
reason why the Tivoli Access Manager Plug-in for Web
Servers authorization server could not be started and
take appropriate action.
Name: pdwpi_m_config_start_server_error
Number: 0x35e1e050 (903995472)
AMZCO0076I Stopping the server.
Severity: Error
Explanation: This message is informational.
Component: pco / pd_wpi_config_s_rc
Action: No action is required.
Name: pdwpi_m_config_stop_server
Number: 0x35e1e04c (903995468)
Severity: Notice
Component: pco / pd_wpi_config_s_rc
AMZCO0077E The server could not be stopped.
Explanation: The Tivoli Access Manager Plug-in for
Web Servers authorization server could not be stopped
the configuration program. This message is
informational.
Action: Examine earlier messages to determine the
reason why the Tivoli Access Manager Plug-in for Web
Servers authorization server could not be stopped and
take appropriate action.
Name: pdwpi_s_config_stop_server_error
Number: 0x35e1e04d (903995469)
Severity: Error
Component: pco / pd_wpi_config_s_rc
AMZCO0079E The server could not be stopped.
Explanation: The Tivoli Access Manager Plug-in for
Web Servers authorization server could not be stopped
the configuration program. This message is
informational.
Action: Examine earlier messages to determine the
reason why the Tivoli Access Manager Plug-in for Web
Servers authorization server could not be stopped and
take appropriate action.
AMZCO0129I Gathering the necessary configuration
information ...
Explanation: This message is informational.
Action: No action is required.
Name: pdwpi_m_config_data_gathering
Number: 0x35e1e081 (903995521)
Severity: Notice
Component: pco / pd_wpi_request_s
AMZCO0130I Configuring the Tivoli Access
Manager Plug-in for Web Servers
authorization server. (This might take a
few minutes) ...
Explanation: This message is informational.
Action: No action is required.
Name: pdwpi_m_config_configuring
Number: 0x35e1e082 (903995522)
Severity: Notice
Component: pco / pd_wpi_request_s
AMZCO0131I Unconfiguring the Tivoli Access
Manager Plug-in for Web Servers
authorization server ...
Explanation: This message is informational.
Action: No action is required.
Name: pdwpi_m_config_unconfiguring
Name: pdwpi_m_config_stop_server_error
Number: 0x35e1e083 (903995523)
Number: 0x35e1e04f (903995471)
Severity: Notice
Severity: Error
Component: pco / pd_wpi_request_s
254
Error Message Reference
AMZCO0153I The plug-in configuration was
successful.
AMZCO0166E The specified LDAP SSL client key
file could not be opened.
Explanation: This message is informational.
Explanation: The specified LDAP SSL client key file
could not be opened for the indicated reason.
Action: No action is required.
Name: pdwpi_m_configuration_successful
Action: Correct the problem and retry the operation.
Name: pdwpi_s_invalid_ldap_ssl_key_file
Number: 0x35e1e099 (903995545)
Number: 0x35e1e0a6 (903995558)
Severity: Notice
Component: pco / pd_wpi_request_s
Severity: Error
Component: pco / pd_wpi_request_s
AMZCO0154I The plug-in unconfiguration was
successful.
Explanation: This message is informational.
Action: No action is required.
Name: pdwpi_m_unconfiguration_successful
Number: 0x35e1e09a (903995546)
Severity: Notice
Component: pco / pd_wpi_request_s
AMZCO0157I Note: The Web server must be
restarted before the configuration
changes will take effect.
Explanation: In order for the Tivoli Access Manager
Web server plug-in to be recognized be the Web server
the Web server must be restarted. No protection will be
provided to Web server resources until the Web server
is restarted.
Action: Restart the Web server.
AMZCO0167E All virtual hosts have already been
protected.
Explanation: You cannot perform a configuration
using the configuration utility if no virtual hosts have
been left unprotected. The configuration utility is only
useful for protecting currently unprotected virtual
hosts.
Action: Either add more virtual hosts to the web
server, or unprotected one or more existing virtual
hosts before running the configuration utility again.
Name: pdwpi_s_all_vhosts_configured
Number: 0x35e1e0a7 (903995559)
Severity: Error
Component: pco / pd_wpi_request_s
AMZCO0193I The configuration program was not
invoked with the correct command line
arguments
Explanation: The configuration program was not
invoked with the correct command line arguments
Name: pdwpi_m_restart_web_server
Number: 0x35e1e09d (903995549)
Severity: Notice
Action: Examine the usage for the configuration
program and execute the program accordingly.
Component: pco / pd_wpi_request_s
Name: pdwpi_s_usage_error
AMZCO0160E The LDAP SSL client key file %s
could not be opened: system error: %s
(system error code: %d).
Explanation: The specified LDAP SSL client key file
could not be opened for the indicated reason.
Action: Correct the problem and retry the operation.
Name: pdwpi_m_invalid_ldap_ssl_key_file
Number: 0x35e1e0a0 (903995552)
Severity: Error
Component: pco / pd_wpi_request_s
Number: 0x35e1e0c1 (903995585)
Severity: Notice
Component: pco / pd_wpi_config_error_s
AMZCO0196E A stanza in the configuration file
could not be located.
Explanation: A stanza being searched for could not be
located.
Action: Examine earlier messages for details of the
particular stanza and stanza file, correct the problem,
and retry the operation.
Name: pdwpi_s_no_stanza
Number: 0x35e1e0c4 (903995588)
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
255
Severity: Error
Component: pco / pd_wpi_config_error_s
Component: pco / pd_wpi_config_error_s
AMZCO0198E The authorization server IPC interface
was not configured successfully.
Explanation: The Tivoli Access Manager Plug-in for
Web Servers authorization server IPC interface was not
successfully configured.
Action: Examine earlier messages for details of the
failure, correct any problems and retry the operation.
Name: pdwpi_m_proxy_if_failed
Number: 0x35e1e0c6 (903995590)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0201W The authorization server IPC
interface failed to unconfigure.
Explanation: The Tivoli Access Manager Plug-in for
Web Servers authorization server IPC interface was not
successfully unconfigured.
Action: No action is required.
AMZCO0211E The authorization server could not be
configured to start automatically on
system restart.
Explanation: The Tivoli Access Manager Plug-in for
Web Servers authorization server could not be
configured to start automatically on system restart.
Action: Examine earlier messages for details of the
problem, correct it and retry the operation.
Name: pdwpi_m_auto_start_failed
Number: 0x35e1e0d3 (903995603)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0212E The authorization server could not be
configured to start automatically on
system restart.
Explanation: The Tivoli Access Manager Plug-in for
Web Servers authorization server could not be
configured to start automatically on system restart.
Name: pdwpi_m_proxy_if_unconfig_failure
Action: Examine earlier messages for details of the
problem, correct it and retry the operation.
Number: 0x35e1e0c9 (903995593)
Name: pdwpi_s_auto_start_failure
Severity: Warning
Number: 0x35e1e0d4 (903995604)
Component: pco / pd_wpi_config_error_s
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0205E The authorization server could not be
configured for the virtual hosts
specified.
Explanation: The virtual host was not successfully
configured.
Action: Examine earlier messages for details of the
failure, correct the problem, and retry the operation.
Name: pdwpi_m_virtual_host_failed
Number: 0x35e1e0cd (903995597)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0210I The authorization server is configured
to start automatically on system restart.
Explanation: This message is informational.
Action: No action is required.
Name: pdwpi_m_auto_start_success
Number: 0x35e1e0d2 (903995602)
Severity: Notice
256
Error Message Reference
AMZCO0213I The authorization server will no
longer be automatically started on
system restart.
Explanation: This message is informational.
Action: No action is required.
Name: pdwpi_m_auto_start_unconfig_ success
Number: 0x35e1e0d5 (903995605)
Severity: Notice
Component: pco / pd_wpi_config_error_s
AMZCO0214W The authorization server could not
be removed from the list of services to
be automatically started on system
restart.
Explanation: The Tivoli Access Manager Plug-in for
Web Servers authorization server could not be removed
from the list of services to be automatically started on
system restart.
Action: If the Tivoli Access Manager Plug-in for Web
Servers authorization server still appears as an
operating system service use the operating system
service administration tools to remove it manually.
Component: pco / pd_wpi_config_error_s
Name: pdwpi_m_auto_start_unconfig_ failure
AMZCO0220E Failure obtaining local host name:
system error: %s (system error code:
%d).
Number: 0x35e1e0d6 (903995606)
Severity: Warning
Component: pco / pd_wpi_config_error_s
Explanation: The host name of the machine could not
be determined for the indicated reason.
Action: Correct the problem and retry the operation.
AMZCO0215W The authorization server will no
longer be automatically started on
system restart.
Explanation: The Tivoli Access Manager Plug-in for
Web Servers authorization server could not be removed
from the list of services to be automatically started on
system restart.
Action: If the Tivoli Access Manager Plug-in for Web
Servers authorization server still appears as an
operating system service use the operating system
service administration tools to remove it manually.
Name: pdwpi_s_auto_start_unconfig_failed
Number: 0x35e1e0d7 (903995607)
Severity: Warning
Component: pco / pd_wpi_config_error_s
Name: pdwpi_m_hostname_failed
Number: 0x35e1e0dc (903995612)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0226E The authorization server IPC interface
file could not be created.
Explanation: The Tivoli Access Manager Plug-in for
Web Servers authorization server inter-process
communication (IPC) interface file could not be created.
Action: Examine earlier messages in the log file
containing this message for more detailed errors,
correct the problem, and retry the configuration
operation.
Name: pdwpi_s_proxy_if_error
AMZCO0216E The Tivoli Access Manager policy
server is not responding. Verify that the
Tivoli Access Manager policy server is
running.
Explanation: The Tivoli Access Manager Plug-in for
Web Servers configuration or unconfiguration cannot be
completed because the Tivoli Access Manager policy
server cannot be contacted.
Action: Ensure that the location of the Tivoli Access
Manager policy server was specified correctly during
configuration and retry the operation.
Name: pdwpi_m_mgr_not_responding
Number: 0x35e1e0e2 (903995618)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0227E The Sun Java System (formerly
SunONE) Web Server plug-in is not
supported on this operating system.
Explanation: An attempt was made to configure the
Tivoli Access Manager Plug-in for Sun Java System
(formerly SunONE) Web Server on an unsupported
operating system.
Severity: Error
Action: Do not configure the Tivoli Access Manager
Plug-in for Sun Java System (formerly SunONE) Web
Server on this operating system.
Component: pco / pd_wpi_config_error_s
Name: pdwpi_m_iplanet_not_supported
Number: 0x35e1e0d8 (903995608)
Number: 0x35e1e0e3 (903995619)
AMZCO0217E A Tivoli Access Manager
administration operation failed.
Explanation: A Tivoli Access Manager administration
operation has failed.
Action: Examine earlier messages for details on the
failure, correct the problem, and retry the operation.
Name: pdwpi_s_svr_complete_err
Number: 0x35e1e0d9 (903995609)
Severity: Error
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0228E An error occurred while parsing the
Sun Java System (formerly SunONE)
Web Server configuration file %s for the
virtual host %s.
Explanation: An error occurred while parsing the Sun
Java System (formerly SunONE) Web Server
configuration file.
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
257
Action: Check the Sun Java System (formerly
SunONE) Web Server configuration file to ensure that it
is of the correct format. Start the Sun Java System Web
Server to see if it accepts the configuration file.
Name: pdwpi_m_iplanet_invalid_configuration_ file
Number: 0x35e1e0e4 (903995620)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0232E The virtual host ’%s’ does not exist.
Explanation: The specified virtual host could not be
located in the Web server’s configuration data.
Action: Check the name of the virtual host and retry
the configuration.
Name: pdwpi_m_invalid_virtual_host
Number: 0x35e1e0e8 (903995624)
Severity: Error
AMZCO0229E There appears to be an error with the
IHS configuration file %s.
Component: pco / pd_wpi_config_error_s
Explanation: An error occurred while parsing the IBM
HTTP Server (IHS) configuration file.
AMZCO0233E The file %s could not be opened.
Action: Check the IBM HTTP Server (IHS)
configuration file to ensure that it is of the correct
format. Start the Web server to see if it accepts the
configuration file.
Name: pdwpi_m_ihs_invalid_configuration_ file
Number: 0x35e1e0e5 (903995621)
Explanation: The specified file could not be accessed.
Action: Check the availability of the specified file.
Name: pdwpi_m_invalid_file
Number: 0x35e1e0e9 (903995625)
Severity: Error
Component: pco / pd_wpi_config_error_s
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0234E The stanza %s in the %s
configuration file could not be accessed.
AMZCO0230E The IHS Web server plug-in is not
supported on this operating system.
Explanation: The requested stanza within the
configuration file could not be accessed.
Explanation: An attempt was made to configure the
Tivoli Access Manager Plug-in for IBM HTTP Server
(IHS) on an unsupported operating system.
Action: Check the availability of the specified file, and
also check whether the file contains the required stanza.
Action: Do not configure the Tivoli Access Manager
Plug-in for IBM HTTP Server (IHS) on this operating
system.
Number: 0x35e1e0ea (903995626)
Name: pdwpi_m_ihs_not_supported
Component: pco / pd_wpi_config_error_s
Name: pdwpi_m_invalid_stanza
Severity: Error
Number: 0x35e1e0e6 (903995622)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0231E The directory %s does not exist or is
not accessible: error: %s (error code:
%#x).
Explanation: The specified directory could not be
accessed.
AMZCO0235E The %s entry of the %s stanza of the
%s configuration file could not be
accessed.
Explanation: The requested stanza and entry within
the configuration file could not be accessed.
Action: Check the availability of the specified file, and
also check whether the file contains the required stanza
and entry.
Name: pdwpi_m_invalid_stanza_entry
Action: Check the availability of the specified
directory.
Number: 0x35e1e0eb (903995627)
Name: pdwpi_m_invalid_directory
Severity: Error
Number: 0x35e1e0e7 (903995623)
Component: pco / pd_wpi_config_error_s
Severity: Error
Component: pco / pd_wpi_config_error_s
258
Error Message Reference
AMZCO0236E The necessary configuration options
could not be found in the configuration
file.
Explanation: The required items could not be
retrieved from the file.
Action: Check that the correct file is specified.
Name: pdwpi_s_config_file_invalid
Number: 0x35e1e0f1 (903995633)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0242E The configuration was not successful.
Explanation: The configuration was not successful.
Action: Examine earlier messages for details of the
configuration failure, correct the problems identified,
and retry the operation.
Number: 0x35e1e0ec (903995628)
Severity: Error
Component: pco / pd_wpi_config_error_s
Name: pdwpi_m_config_failed
Number: 0x35e1e0f2 (903995634)
AMZCO0238W The Tivoli Access Manager Plug-in
for Web Servers could not be
unconfigured as a Tivoli Access
Manager server.
Severity: Error
Explanation: The Tivoli Access Manager Plug-in for
Web Servers could not be unconfigured as a Tivoli
Access Manager server.
AMZCO0243E The configuration was not successful.
Action: Use the svrsslcfg utility provided with the
Tivoli Access Manager runtime environment to
manually unconfigure Tivoli Access Manager Plug-in
for Web Servers as a Tivoli Access Manager server. The
server name to use when performing the
unconfiguration manually is ’PDWebPI’.
Name: pdwpi_m_aznapi_unconfig_failure
Number: 0x35e1e0ee (903995630)
Severity: Warning
Component: pco / pd_wpi_config_error_s
Component: pco / pd_wpi_config_error_s
Explanation: The configuration was not successful.
Action: Examine earlier messages for details of the
configuration failure, correct the problems identified,
and retry the operation.
Name: pdwpi_s_config_failed
Number: 0x35e1e0f3 (903995635)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0244E The unconfiguration was not
completed successfully.
Explanation: The unconfiguration failed.
AMZCO0240E The plug-in already appears to be
configured. Please unconfigure and try
again.
Action: Examine earlier messages for details of the
unconfiguration failure, correct the indicated problems,
and retry the operation.
Explanation: The Tivoli Access Manager Web server
plug-in is already configured.
Name: pdwpi_m_unconfig_failed
Action: Unconfigure the Tivoli Access Manager Web
server plug-in and retry the operation.
Severity: Error
Number: 0x35e1e0f4 (903995636)
Component: pco / pd_wpi_config_error_s
Name: pdwpi_s_already_configured
Number: 0x35e1e0f0 (903995632)
Severity: Error
AMZCO0245E The unconfiguration was not
successful.
Component: pco / pd_wpi_config_error_s
Explanation: The unconfiguration failed.
AMZCO0241E The Web server plug-in is not
configured.
Action: Examine earlier messages for details of the
unconfiguration failure, correct the indicated problems,
and retry the operation.
Explanation: An attempt has been made to
unconfigure the Web server plug-in when it is not
configured.
Name: pdwpi_s_unconfig_failed
Action: No action is required.
Severity: Error
Name: pdwpi_m_not_configured
Component: pco / pd_wpi_config_error_s
Number: 0x35e1e0f5 (903995637)
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
259
AMZCO0246E The Tivoli Access Manager Plug-in
for Web Server configuration as a Tivoli
Access Manager server failed.
Explanation: The Tivoli Access Manager Plug-in for
Web servers configuration as a Tivoli Access Manager
server was not successful.
Action: Examine earlier messages for details of the
configuration failure, correct the indicated problems,
and retry the operation.
Name: pdwpi_m_aznapi_config_failure
Number: 0x35e1e0f6 (903995638)
Severity: Error
Component: pco / pd_wpi_config_error_s
Number: 0x35e1e0f9 (903995641)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0250W The Tivoli Access Manager Plug-in
for Web Server ACLs could not be
deleted.
Explanation: The Tivoli Access Manager Plug-in for
Web Server ACLs could not be deleted.
Action: Examine earlier messages for details of the
unconfiguration failure, correct the indicated problems,
and retry the operation.
Name: pdwpi_m_acl_unconfig_failure
Number: 0x35e1e0fa (903995642)
AMZCO0247E The administration service failed to
configure.
Explanation: The administration service configuration
was not successful.
Action: Examine earlier messages for details of the
configuration failure, correct the indicated problems,
and retry the operation.
Name: pdwpi_m_admin_service_config_ failure
Number: 0x35e1e0f7 (903995639)
Severity: Error
Component: pco / pd_wpi_config_error_s
Severity: Warning
Component: pco / pd_wpi_config_error_s
AMZCO0251E No Web server plug-in package has
been installed.
Explanation: An attempt has been made to configure
the Tivoli Access Manager Web server plug-in when no
plug-in package has been installed.
Action: Install a Tivoli Access Manager Web server
plug-in package and retry the operation.
Name: pdwpi_m_no_web_plugin_pkg_installed_
Number: 0x35e1e0fb (903995643)
AMZCO0248W The administration service failed to
unconfigure.
Explanation: The administration service
unconfiguration was not successful.
Action: Examine earlier messages for details of the
unconfiguration failure, correct the indicated problems,
and retry the operation.
Name: pdwpi_m_admin_service_unconfig_ failure
Number: 0x35e1e0f8 (903995640)
Severity: Warning
Component: pco / pd_wpi_config_error_s
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0252E No Web server plug-in package has
been installed.
Explanation: An attempt has been made to configure
the Tivoli Access Manager Web server plug-in when no
plug-in package has been installed.
Action: Install a Tivoli Access Manager Web server
plug-in package and retry the operation.
Name: pdwpi_s_no_web_plugin_pkg_installed_
Number: 0x35e1e0fc (903995644)
AMZCO0249E The necessary ACLs could not be
created.
Explanation: The access control lists for the Tivoli
Access Manager Plug-in for Web Servers could not be
created.
Action: Examine earlier messages for details of the
configuration failure, correct the indicated problems,
and retry the operation.
Name: pdwpi_m_acl_config_failure
260
Error Message Reference
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0253E The requested Web server plug-in is
not currently supported.
Explanation: A request has been made to configure a
Tivoli Access Manager Web server plug-in that is
installed but is not supported.
Action: Contact your IBM service representative.
Name: pdwpi_m_web_plugin_pkg_not_ installed
Number: 0x35e1e0fd (903995645)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0254E The requested Web server plug-in is
not currently supported.
AMZCO0385E The Windows service database could
not be opened.
Explanation: The Windows service database could not
be opened.
Action: Ensure that you are logged in as a user with
sufficient privileges to administer Windows services. If
the problem persists, contact your IBM service
representative.
Explanation: A request has been made to configure a
Tivoli Access Manager Web server plug-in that is
installed but is not supported.
Name: pdwpi_s_couldnt_open_service_ manager
Action: Contact your IBM service representative.
Severity: Error
Name: pdwpi_s_web_plugin_pkg_not_ installed
Component: pco / pd_wpi_config_error_s
Number: 0x35e1e181 (903995777)
Number: 0x35e1e0fe (903995646)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0255E The IIS Web server plug-in is not
supported on this operating system.
Explanation: An attempt was made to configure the
Tivoli Access Manager Plug-in for Microsoft Internet
Information Services (IIS) on an unsupported operating
system.
AMZCO0386E The %s service could not be accessed
in the Windows service database: system
error: %s (system error code: %d).
Explanation: A service in the Windows service
database could not be opened for the reason indicated.
Action: Ensure that you are logged in as a user with
sufficient privileges to administer Windows services. If
the problem persists, contact your IBM service
representative.
Name: pdwpi_m_couldnt_open_service
Action: Do not configure the Tivoli Access Manager
Plug-in for Microsoft Internet Information Services (IIS)
on this operating system.
Number: 0x35e1e182 (903995778)
Name: pdwpi_s_iis_not_supported
Component: pco / pd_wpi_config_error_s
Severity: Error
Number: 0x35e1e0ff (903995647)
AMZCO0387E The service could not be accessed in
the Windows service database.
Severity: Error
Component: pco / pd_wpi_config_error_s
Explanation: A service in the Windows service
database could not be opened.
AMZCO0384E The Windows service database could
not be opened: system error: %s (system
error code: %d).
Action: Ensure that you are logged in as a user with
sufficient privileges to administer Windows services. If
the problem persists, contact your IBM service
representative.
Explanation: The Windows service database could not
be opened for the reason indicated.
Action: Ensure that you are logged in as a user with
sufficient privileges to administer Windows services. If
the problem persists, contact your IBM service
representative.
Name: pdwpi_s_couldnt_open_service
Number: 0x35e1e183 (903995779)
Severity: Error
Component: pco / pd_wpi_config_error_s
Name: pdwpi_m_couldnt_open_service_ manager
AMZCO0388E The current state of the %s service
could not be determined: system error:
%s (system error code: %d).
Number: 0x35e1e180 (903995776)
Severity: Error
Component: pco / pd_wpi_config_error_s
Explanation: A service in the Windows service
database could not be queried for its status for the
reason indicated.
Action: Ensure that you are logged in as a user with
sufficient privileges to administer Windows services. If
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
261
the problem persists, contact your IBM service
representative.
Name: pdwpi_m_couldnt_query_service_ status
Number: 0x35e1e184 (903995780)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0389E The current state of the service could
not be determined.
Explanation: A service in the Windows service
database could not be queried for its status.
Action: Ensure that you are logged in as a user with
sufficient privileges to administer Windows services. If
the problem persists, contact your IBM service
representative.
Name: pdwpi_s_couldnt_query_service_ status
Number: 0x35e1e185 (903995781)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0392E The %s service could not be started:
system error: %s (system error code:
%d).
Explanation: A service in the Windows service
database could not be started for the reason indicated.
Action: Ensure that you are logged in as a user with
the sufficient privileges to administer windows
services. If the problem persists, contact your IBM
service representative.
Name: pdwpi_m_couldnt_start_service
Number: 0x35e1e188 (903995784)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0393E The service could not be started.
Explanation: A service in the Windows service
database could not be started.
Action: Ensure that you are logged in as a user with
sufficient privilege to administer Windows services. If
the problem persists, contact your IBM service
representative.
AMZCO0390E The %s service could not be stopped:
system error: %s (system error code:
%d).
Name: pdwpi_s_couldnt_start_service
Explanation: A service in the Windows service
database could not be stopped for the reason indicated.
Severity: Error
Action: Ensure that you are logged in as a user with
sufficient privileges to administer Windows services. If
the problem persists, contact your IBM service
representative.
Name: pdwpi_m_couldnt_stop_service
Number: 0x35e1e186 (903995782)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0391E The service could not be stopped.
Explanation: A service in the Windows service
database could not be stopped.
Action: Ensure that you are logged in as a user with
sufficient privileges to administer Windows services. If
the problem persists, contact your IBM service
representative.
Name: pdwpi_s_couldnt_stop_service
Number: 0x35e1e187 (903995783)
Severity: Error
Component: pco / pd_wpi_config_error_s
Number: 0x35e1e189 (903995785)
Component: pco / pd_wpi_config_error_s
AMZCO0394E The %s service has taken longer than
%d seconds since the last checkpoint to
start.
Explanation: A service in the Windows service
database took longer than expected to start.
Action: Using the service control panel applet, wait
until the identified service starts. If the problem
persists, contact your IBM service representative.
Name: pdwpi_m_timed_out_starting_service
Number: 0x35e1e18a (903995786)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0395E The service took too long to start.
Explanation: A service in the Windows service
database took longer than expected to start.
Action: Using the service control panel applet, wait
until the identified service starts. If the problem
persists, contact your IBM service representative.
Name: pdwpi_s_timed_out_starting_service
Number: 0x35e1e18b (903995787)
262
Error Message Reference
Severity: Error
Name: pdwpi_s_config_web_server_restart_ failed
Component: pco / pd_wpi_config_error_s
Number: 0x35e1e18f (903995791)
Severity: Error
AMZCO0396E The %s service has taken longer than
%d seconds to stop.
Explanation: A service in the Windows service
database took longer than expected to stop.
Action: Using the service control panel applet, wait
until the identified service stops and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: pdwpi_m_timed_out_stopping_service
Number: 0x35e1e18c (903995788)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0397E The service took too long to stop.
Explanation: A service in the Windows service
database took longer than expected to stop.
Action: Using the service control panel applet, wait
until the identified service stops and retry the
operation. If the problem persists, contact your IBM
service representative.
Name: pdwpi_s_timed_out_stopping_service
Number: 0x35e1e18d (903995789)
Severity: Error
Component: pco / pd_wpi_config_error_s
Component: pco / pd_wpi_config_error_s
AMZCO0400E The configuration information for the
%s service could not be accessed: system
error: %s (system error code: %d).
Explanation: A service in the Windows service
database could not be queried for its configuration for
the reason indicated.
Action: Ensure that you are logged in as a user with
sufficient privilege to administer Windows services. If
the problem persists, contact your IBM service
representative.
Name: pdwpi_m_couldnt_query_service_ config
Number: 0x35e1e190 (903995792)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0401E The configuration information for the
service could not be accessed.
Explanation: A service in the Windows service
database could not be queried for its configuration.
Action: Ensure that you are logged in as a user with
privilege to administer Windows services. If the
problem persists, contact your IBM service
representative.
Name: pdwpi_s_couldnt_query_service_ config
AMZCO0398E The Web server could not be
restarted: error: %s (error code: %#x).
Explanation: An attempt to restart the Web server was
made but failed.
Action: If the problem persists, contact your IBM
service representative.
Name: pdwpi_m_config_web_server_restart_ failed
Number: 0x35e1e191 (903995793)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0402E The configuration program must be
run as root.
Explanation: The Tivoli Access Manager Plug-in for
Web Servers configuration program needs to be run as
the root user.
Number: 0x35e1e18e (903995790)
Severity: Error
Component: pco / pd_wpi_config_error_s
Action: Run the Tivoli Access Manager Plug-in for
Web Servers configuration program as the root user.
AMZCO0399E The Web server could not be
restarted.
Name: pdwpi_m_run_config_as_root
Explanation: The Tivoli Access Manager Plug-in for
Web Servers configuration program attempted to restart
the Web server but failed.
Number: 0x35e1e192 (903995794)
Severity: Error
Component: pco / pd_wpi_config_error_s
Action: Restart the Web server manually. If the
problem persists, contact your IBM service
representative.
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
263
AMZCO0403E No user was found for the virtual
host %s.
AMZCO0407I A Tivoli Access Manager
administration command %s failed: %s
Explanation: A user could not be found for a
particular virtual host. A user is required to allow
permissions to be set up correctly for the shared
memory used to communicate between the Tivoli
Access Manager Plug-in for Web Servers authorization
server and the Web server plug-in.
Explanation: The specified administration command
failed.
Action: Ensure that the Web server configuration is
correct.
Action: Ensure that the Tivoli Access Manager policy
server is running, and that the Tivoli Access Manager
runtime environment has been configured correctly.
Name: pdwpi_m_admin_command_failed
Number: 0x35e1e197 (903995799)
Name: pdwpi_m_no_user_found
Severity: Notice
Number: 0x35e1e193 (903995795)
Component: pco / pd_wpi_config_s_rc
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0404I The package must be unconfigured
before it can be removed.
Explanation: The package selected for uninstallation
must first be unconfigured.
Action: Unconfigure the selected package before
uninstalling it.
Name: pdwpi_m_unconfigure
AMZCO0409E The URAF initialization was not
successful: %s (%#x).
Explanation: The URAF initialization was not
successful.
Action: Contact your IBM service representative.
Name: pdwpi_m_uraf_initialize_failure
Number: 0x35e1e199 (903995801)
Severity: Error
Component: pco / pd_wpi_config_error_s
Number: 0x35e1e194 (903995796)
Severity: Notice
Component: pco / pd_wpi_config_s_rc
AMZCO0405I The configuration has been canceled.
AMZCO0410E The user %s could not be added to
the group %s: (URAF error code: %#x).
Explanation: The identified user could not be added
to the identified group.
Action: No action is required.
Action: Ensure that the user registry is available and
retry the operation. If the problem persists, contact
your IBM service representative.
Name: pdwpi_s_config_canceled
Name: pdwpi_m_uraf_add_group_failure
Number: 0x35e1e195 (903995797)
Number: 0x35e1e19a (903995802)
Severity: Notice
Severity: Error
Component: pco / pd_wpi_config_s_rc
Component: pco / pd_wpi_config_error_s
AMZCO0406I A Tivoli Access Manager
administration interface context could
not be created: %s
AMZCO0411I An internal failure occurred within
URAF.
Explanation: This message is informational.
Explanation: Communications to the Tivoli Access
Manager policy server could not be established.
Action: Ensure that the Tivoli Access Manager policy
server is running and that the Tivoli Access Manager
runtime environment has been configured correctly.
Explanation: An internal failure occurred within
URAF.
Action: Contact your IBM service representative.
Name: pdwpi_s_uraf_failure
Number: 0x35e1e19b (903995803)
Name: pdwpi_m_create_admin_context_ failed
Severity: Notice
Number: 0x35e1e196 (903995798)
Component: pco / pd_wpi_config_error_s
Severity: Notice
Component: pco / pd_wpi_config_s_rc
264
Error Message Reference
AMZCO0412E The response file %s could not be
processed: error: %s (error code: 0x%x).
Explanation: An invalid response file was provided to
the Tivoli Access Manager Plug-in for Web Servers
configuration program.
Action: Examine the Tivoli Access Manager Plug-in
for Web Servers configuration program log file for more
details on the errors found in the response file.
Name: pdwpi_m_rsp_file_failure
Number: 0x35e1e19c (903995804)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0413E An invalid DN was retrieved for the
admin group %s
Explanation: The admin group is required as a DN
template in creation of other groups. The DN for the
admin group which was retrieved does not contain the
name of the admin group.
Action: Contact your IBM support representative.
Name: pdwpi_m_invalid_admin_group_dn
Number: 0x35e1e19d (903995805)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0414E No Sun Java System (formerly
SunONE) Web Server configuration
information for the virtual host %s
could be found under the %s directory.
Ensure that the correct directory is
specified and that file permissions allow
read access to the appropriate users.
Explanation: No configuration file could be found
under the specified directory for the identified virtual
host.
Action: Retry the configuration option making sure
you specify the correct Sun Java System (formerly
SunONE) Web Server installation directory and valid
virtual host names. Ensure that the correct permissions
are assigned to the files contained within the Web
server installation directory, allowing read access for
the appropriate users.
AMZCO0415E The SSL keyfile %s permissions do
not permit read-write access by the user
%s or group %s.
Explanation: In order to use the identified SSL keyfile
the identified user requires read-write access. Normally,
the configuration program will change the ownership
or permissions of the file so that the identified user can
access the keyfile appropriately. It will not do this if the
keyfile is owned by the ivmgr user and a group other
than ivmgr and the group permissions on the file do
not permit read-write access. This protects
configurations where the administrator has carefully set
the keyfile permissions from being overridden by this
configuration program.
Action: Change the permissions of the file so that the
identified user will have read-write access or specify an
alternate keyfile to use.
Name: pdwpi_m_ldap_ssl_keyfile_no_perm
Number: 0x35e1e19f (903995807)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0416E The specified SSL keyfile permissions
do not permit read-write access.
Explanation: In order to use the identified SSL keyfile
the Tivoli Access Manager Plug-in for Web Servers
authorization server requires read-write access.
Normally, the configuration program will change the
ownership or permissions of the file so that the
authorization server can access the keyfile
appropriately. It will not do this if the keyfile is owned
by the ivmgr user and a group other than ivmgr and
the group permissions on the file do not permit
read-write access. This protects configurations where
the administrator has carefully set the keyfile
permissions from being overridden by this
configuration program.
Action: Change the permissions of the file so that the
identified user will have read-write access or specify an
alternate keyfile to use.
Name: pdwpi_s_ldap_ssl_keyfile_no_perm
Number: 0x35e1e1a0 (903995808)
Severity: Error
Component: pco / pd_wpi_config_error_s
Name: pdwpi_m_iplanet_no_config_for_ vhost
AMZCO0417E The file permissions for file %s could
not be set to %#o: error: %s (error code:
%#x).
Number: 0x35e1e19e (903995806)
Severity: Error
Component: pco / pd_wpi_config_error_s
Explanation: The configuration requires that the
identified file have the specified permissions and the
specified error occurred while attempting to change the
permissions.
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
265
Action: Change the permissions manually and retry
the operation.
Name: pdwpi_m_set_file_permissions_ failed
Number: 0x35e1e1a1 (903995809)
Severity: Error
AMZCO0422E The action ’%s’ is not a recognized
action.
Explanation: An invalid value for the ’-action’
parameter of the configuration program has been
specified either on the command line or in the response
file.
Component: pco / pd_wpi_config_error_s
Action: Run the configuration program specifying a
valid action.
AMZCO0418E The user %s could not be added to
the group %s: error: %s (error code:
%#x).
Name: pdwpi_m_invalid_config_action_ specified
Explanation: The identified user could not be added
to the identified group.
Severity: Error
Action: Ensure that the user registry is available and
retry the operation. If the problem persists, contact
your IBM service representative.
Name: pdwpi_m_system_add_group_failure
Number: 0x35e1e1a2 (903995810)
Severity: Error
Number: 0x35e1e1a6 (903995814)
Component: pco / pd_wpi_config_error_s
AMZCO0423E An unrecognized action was
specified.
Explanation: An invalid value for the ’-action’
parameter of the configuration program has been
specified either on the command line or in the response
file.
Component: pco / pd_wpi_config_error_s
Action: Run the configuration program specifying a
valid action.
AMZCO0419E The properties for file %s could not
be set to user %s, group %s, and
permissions %#o: error: %s (error code:
%#x).
Name: pdwpi_s_invalid_config_action_ specified
Explanation: The configuration requires that the
identified file have the specified permissions and
ownership properties and the specified error occurred
while attempting to change the properties.
Action: Change the ownership and permissions
manually and retry the operation.
Name: pdwpi_m_set_file_properties_failed
Number: 0x35e1e1a3 (903995811)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0420E The Web server plug-in is not
configured.
Explanation: An attempt has been made to
unconfigure the Web server plug-in when it is not
configured.
Action: No action is required.
Name: pdwpi_s_not_configured
Number: 0x35e1e1a4 (903995812)
Severity: Error
Component: pco / pd_wpi_config_error_s
266
Error Message Reference
Number: 0x35e1e1a7 (903995815)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0424E No value has been specified for the
required ’%s’ configuration item.
Explanation: No value has been specified for the
required configuration item.
Action: Run the configuration program specifying a
value for identified configuration item on the command
line or in a response file. Alternatively, you may run
the configuration program in interactive mode
(-interactive yes) and be prompted for the item value.
Name: pdwpi_m_missing_configuration_item
Number: 0x35e1e1a8 (903995816)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0425E No value has been specified for a
required configuration item.
Explanation: No value has been specified for the
required configuration item.
Action: Examine earlier error message to identify the
particular configuration item that has not been
specified. Run the configuration program specifying a
value for that configuration item on the command line
or in a response file. Alternatively, you may run the
configuration program in interactive mode (-interactive
yes) and be prompted for the item’s value.
Name: pdwpi_s_missing_configuration_item
Number: 0x35e1e1a9 (903995817)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0426E The value ’%s’ specified for the
’remove’ configuration item is not valid.
Explanation: An invalid value for the ’remove’
configuration item has been specified either on the
command line or in the response file.
Action: Run the configuration program specifying a
valid value for the ’remove’ configuration item.
Name: pdwpi_m_invalid_remove_value
Number: 0x35e1e1aa (903995818)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0427E The value specified for the ’remove’
configuration item is not valid.
Explanation: An invalid value for the ’remove’
configuration item has been specified either on the
command line or in the response file.
Action: Run the configuration program specifying a
valid value for the ’remove’ configuration item.
Name: pdwpi_s_invalid_remove_value
Number: 0x35e1e1ab (903995819)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0428E The virtual host does not exist.
Explanation: A virtual host could not be located in the
Web server’s configuration data.
Action: Examine earlier messages to identify the
virtual host that does not exist. Check the name of the
virtual host and retry the configuration.
Name: pdwpi_s_invalid_virtual_host
Number: 0x35e1e1ac (903995820)
AMZCO0429E The IHS Web server plug-in is not
supported on this operating system.
Explanation: An attempt was made to configure the
Tivoli Access Manager Plug-in for IBM HTTP Server
(IHS) on an unsupported operating system.
Action: Do not configure the Tivoli Access Manager
Plug-in for IBM HTTP Server (IHS) on this operating
system.
Name: pdwpi_s_ihs_not_supported
Number: 0x35e1e1ad (903995821)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0430E The configuration program must be
run as root.
Explanation: The Tivoli Access Manager Plug-in for
Web Servers configuration program needs to be run as
the root user.
Action: Run the Tivoli Access Manager Plug-in for
Web Servers configuration program as the root user.
Name: pdwpi_s_run_config_as_root
Number: 0x35e1e1ae (903995822)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0431E The Sun Java System (formerly
SunONE) Web Server plug-in is not
supported on this operating system.
Explanation: An attempt was made to configure the
Tivoli Access Manager Plug-in for Sun Java System
(formerly SunONE) Web Server on an unsupported
operating system.
Action: Do not configure the Tivoli Access Manager
Plug-in for Sun Java System (formerly SunONE) Web
Server on this operating system.
Name: pdwpi_s_iplanet_not_supported
Number: 0x35e1e1af (903995823)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0432E The command line option ’-%s’ is not
valid.
Severity: Error
Component: pco / pd_wpi_config_error_s
Explanation: The identified command line option is
not valid for the operation requested of the
configuration program.
Action: Re-run the configuration program either
without the option or with the correct option for the
operation.
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
267
Name: pdwpi_m_invalid_command_line_ option
Number: 0x35e1e1b0 (903995824)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0433E The option ’%s’ in the [%s] stanza of
the %s response file is not valid.
Explanation: The identified option read from the
response file is not valid for the operation requested of
the configuration program.
Action: Correct the options in the response file and
re-run the command.
Name: pdwpi_m_invalid_response_file_ option
Number: 0x35e1e1b1 (903995825)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0434E The value ’%s’ for command line
option ’-%s’ is inconsistent with the
previously set value ’%s’.
Explanation: The identified command line option is
has been specified more than once with different values
to the configuration program.
Action: Re-run the configuration program without
specifying inconsistent values for the option.
Name: pdwpi_m_duplicate_command_line_ option
Number: 0x35e1e1b2 (903995826)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0436E ’%s’ is not a valid Web server type.
Explanation: The specified Web server type is not
valid.
Action: Specify a valid Web server type and re-run the
command. The usage message of the configuration
program lists the valid Web server types.
Name: pdwpi_m_invalid_web_server_type
Number: 0x35e1e1b4 (903995828)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0437E The specified Web server type is not
valid.
Explanation: The specified Web server type is not
valid.
Action: Specify a valid Web server type and re-run the
command. The usage message of the configuration
program lists the valid Web server types.
Name: pdwpi_s_invalid_web_server_type
Number: 0x35e1e1b5 (903995829)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0438W The Web server type could not be
determined.
Explanation: The configuration program has reported
that there are configuration parameters that are invalid.
This might be because the parameters are specific to a
particular Web server plug-in but the type of Web
server plug-in to be configured was not explicitly
specified and could not be determined automatically.
AMZCO0435E The value ’%s’ for option ’%s’ in the
[%s] stanza of the %s response file is
inconsistent with the previously set
value ’%s’.
Action: Re-run the configuration program using the
’web_server’ configuration parameter to explicitly
specify the Web server type for which the Tivoli Access
Manager Plug-in for Web Severs is being configured.
Explanation: The identified option read from the
response file is not valid for the operation requested of
the configuration program.
Name: pdwpi_m_indeterminate_web_server_ type
Action: Correct the options in the response file and
re-run the command.
Severity: Warning
Number: 0x35e1e1b6 (903995830)
Component: pco / pd_wpi_config_error_s
Name: pdwpi_m_duplicate_response_ file_option
Number: 0x35e1e1b3 (903995827)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0439E The Web server type could not be
determined.
Explanation: More than one Web server plug-in
package has been installed and the configuration
program was not able to automatically determine
which Web server type to use.
Action: Re-run the configuration program using the
’web_server’ configuration parameter to explicitly
268
Error Message Reference
specify the Web server type for which the Tivoli Access
Manager Plug-in for Web Severs is being configured.
A Lotus No API has failed
Number: 0x35e1e1b7 (903995831)
Explanation: The Lotus Notes API is used to access
Lotus Domino databases and run Lotus Domino
commands. One of these API’s have failed.
Severity: Error
Action: Contact your IBM support representative.
Component: pco / pd_wpi_config_error_s
Name: pdwpi_s_notes_api_failed
Name: pdwpi_s_indeterminate_web_server_ type
Number: 0x35e1e1bb (903995835)
The Lotus
ino Web server plug-in is not supported
on this operating system.
Explanation: An attempt was made to configure the
Tivoli Access Manager Plug-in for Lotus® Domino Web
Server on an unsupported operating system.
Action: Do not configure the Tivoli Access Manager
Plug-in for Lotus Domino Web Server on this operating
system.
Name: pdwpi_m_domino_not_supported
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0444E ’%s’ is not a valid Apache server
version.
Explanation: The specified Apache server version is
not valid.
Severity: Error
Action: Specify a valid Apache server version and
re-run the command. The usage message of the
configuration program lists the valid Apache server
versions.
Component: pco / pd_wpi_config_error_s
Name: pdwpi_m_invalid_apache_version
Number: 0x35e1e1b8 (903995832)
Number: 0x35e1e1bc (903995836)
The config
tion utility could not retrieve the list of
configured virtual hosts from the Lotus
domino server. Please check to ensure
that the server has been installed and is
currently running.
Explanation: The configuration utility must be able to
communicate with the Lotus domino server in order to
be able to determine the list of virtual hosts supported
by the server. This communication did not succeed.
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0445E The specified Apache server version
is not valid.
Explanation: The specified Apache server version is
not valid.
Name: pdwpi_s_domino_server_unreachable
Action: Specify a valid Apache server version and
re-run the command. The usage message of the
configuration program lists the valid Apache server
versions.
Number: 0x35e1e1b9 (903995833)
Name: pdwpi_s_invalid_apache_version
Severity: Error
Number: 0x35e1e1bd (903995837)
Component: pco / pd_wpi_config_error_s
Severity: Error
Action: Check to ensure that the Lotus domino server
has been installed is currently operational.
Component: pco / pd_wpi_config_error_s
The Lotus
es API %s has failed: notes error: %s
(notes error code: %d).
Explanation: The Lotus Notes API is used to access
Lotus Domino databases and run Lotus Domino
commands. One of these API’s have failed.
Action: Contact your IBM support representative.
Name: pdwpi_m_notes_api_failed
Number: 0x35e1e1ba (903995834)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0446E The specified Apache Web Server
version is not supported on this
operating system.
Explanation: An attempt was made to configure the
Tivoli Access Manager Plug-in for Apache Web Server
against a version of the Apache Web Server that is not
supported on the operating system.
Action: Do not configure the Tivoli Access Manager
Plug-in for Apache Web Server against this version of
Apache Web server on this operating system.
Name: pdwpi_m_apache_version_not_ supported
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
269
Number: 0x35e1e1be (903995838)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0447E The specified Apache Web Server
version is not supported on this
operating system.
Explanation: An attempt was made to configure the
Tivoli Access Manager Plug-in for Apache Web Server
against a version of the Apache Web Server that is not
supported on the operating system.
Action: Do not configure the Tivoli Access Manager
Plug-in for Apache Web Server against this version of
Apache Web server on this operating system.
Name: pdwpi_s_apache_version_not_ supported
Number: 0x35e1e1bf (903995839)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0448E ’%s’ is not a valid IBM HTTP Server
version.
Explanation: The specified IBM HTTP Server version
is not valid.
Action: Specify a valid IBM HTTP Server server
version and re-run the command. The usage message
of the configuration program lists the valid IBM HTTP
Server versions.
AMZCO0450E The specified IBM HTTP Server
version is not supported on this
operating system.
Explanation: An attempt was made to configure the
Tivoli Access Manager Plug-in for IBM HTTP Server
against a version of the IBM HTTP Server that is not
supported on the operating system.
Action: Do not configure the Tivoli Access Manager
Plug-in for IBM HTTP Server against this version of
IBM HTTP Server on this operating system.
Name: pdwpi_m_ihs_version_not_supported
Number: 0x35e1e1c2 (903995842)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0451E The specified IBM HTTP Server
version is not supported on this
operating system.
Explanation: An attempt was made to configure the
Tivoli Access Manager Plug-in for IBM HTTP Server
against a version of the IBM HTTP Server that is not
supported on the operating system.
Action: Do not configure the Tivoli Access Manager
Plug-in for IBM HTTP Server against this version of
IBM HTTP Server on this operating system.
Name: pdwpi_s_ihs_version_not_supported
Number: 0x35e1e1c3 (903995843)
Name: pdwpi_m_invalid_ihs_version
Severity: Error
Number: 0x35e1e1c0 (903995840)
Component: pco / pd_wpi_config_error_s
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0449E The specified IBM HTTP Server
version is not valid.
Explanation: The specified IBM HTTP Server version
is not valid.
Action: Specify a valid IBM HTTP Server version and
re-run the command. The usage message of the
configuration program lists the valid IBM HTTP Server
versions.
AMZCO0452E An error occurred during the
configuration of the Tivoli Access
Manager Plug-in for Microsoft Internet
Information Services. Please ensure that
Microsoft Internet Information Services
is installed on the system.
Explanation: An attempt was made to configure the
Tivoli Access Manager Plug-in for Microsoft Internet
Information Services. This attempt failed and the most
likely reason for this is that IIS is not currently installed
on the system.
Name: pdwpi_s_invalid_ihs_version
Action: Ensure that the Microsoft Internet Information
Services component is installed on the system.
Number: 0x35e1e1c1 (903995841)
Name: pdwpi_s_iis_config_failure
Severity: Error
Number: 0x35e1e1c4 (903995844)
Component: pco / pd_wpi_config_error_s
Severity: Error
Component: pco / pd_wpi_config_error_s
270
Error Message Reference
AMZCO0453I Warning: It may be necessary to
increase the amount of shared memory
available to the Web server in order for
it to function correctly. Refer to the IBM
Tivoli Access Manager Plug-in for Web
Servers Administration Guide for
additional information.
Explanation: On certain platforms, the Operating
System does not provide enough shared memory for
both the Web server and the Web plug-ins by default.
For these platforms, the IBM Tivoli Access Manager
Plug-in for Web Servers Administration Guide
describes the steps necessary to inform the Operating
System that additional shared memory is required for
the Web server.
Action: Check the IBM Tivoli Access Manager Plug-in
for Web Servers Administration Guide to ensure that
the shared memory requirements for the Web server are
met.
contain a valid version number. Check the Apache Web
server installation.
Name: pdwpi_s_unknown_apache_version
Number: 0x35e1e1c7 (903995847)
Severity: Error
Component: pco / pd_wpi_config_error_s
AMZCO0456E No IHS Web server package has been
installed.
Explanation: An attempt has been made to configure
the Tivoli Access Manager Web server plug-in when no
IHS package has been installed.
Action: Install a supported version of the IHS Web
server package and retry the operation.
Name: pdwpi_s_no_ihs_web_server_installed_
Number: 0x35e1e1c8 (903995848)
Name: pdwpi_m_apache2_additional_shm
Severity: Error
Number: 0x35e1e1c5 (903995845)
Component: pco / pd_wpi_config_error_s
Severity: Notice
Component: pco / pd_wpi_request_s
AMZIC0001E The requested functionality is not
currently supported.
AMZCO0454W The following IIS Web sites cannot
be represented in a code page supported
by IBM Tivoli Access Manager Plug-in
for Web Servers. To be protected, IIS
Web site names must not contain
characters that cannot be represented in
a supported code page. Rename each
Web site to enable protection. %s
Explanation: An internal function used a feature that
has not been implemented.
Explanation: The listed IIS Web sites are named using
characters that cannot be represented in a supported
code page. Only those code pages corresponding to
languages with full translations are supported.
Action: Rename each of the listed Web sites using
only characters from supported code pages. Only those
code pages corresponding to languages with full
translations are supported.
Name: pdwpi_m_iis_invalid_virtual_hosts
Number: 0x35e1e1c6 (903995846)
Severity: Warning
Component: pco / pd_wpi_config_error_s
AMZCO0455E The version number of the Apache
Web server could not be determined.
Explanation: The version number could not be
obtained from the Apache Web server.
Action: An internal error occurred. Contact your IBM
service representative.
Name: pdwpi_s_not_supported
Number: 0x35f02001 (904929281)
Severity: Fatal
Component: pic / pd_wpi_s
AMZIC0002E The requested data is not available.
Explanation: An operation requested data that was
not available.
Action: This message is logged as the reason part of
an error message. Refer to the recommended action for
that error message. Examine earlier messages in the log
containing this message for more detailed information
about the failure. Review these, correct any problem
and retry the operation.
Name: pdwpi_s_not_available
Number: 0x35f02002 (904929282)
Severity: Error
Component: pic / pd_wpi_s
Action: The version number for the Apache Web
server is determined by passing the -v option to the
httpd command. The output of this command did not
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
271
AMZIC0003W The requested data could not be
written to the network buffer.
Explanation: A network write operation failed. This
error can occur if the Web browser is closed before the
plug-in sent a response.
Action: Examine other system error logs for other
conditions that may result in network write errors.
AMZIC0007I A transitional response has been set.
Explanation: A response is being built up for
transmission to the client.
Action: No action is required.
Name: pdwpi_s_plugin_rsp_pending
Number: 0x35f02007 (904929287)
Name: pdwpi_s_net_write_error
Severity: Notice
Number: 0x35f02003 (904929283)
Component: pic / pd_wpi_s
Severity: Warning
Component: pic / pd_wpi_s
AMZIC0004E Could not open the requested file.
Explanation: A file could not be opened.
Action: Examine earlier messages in the log
containing this message for more detailed information
about the failure. Review these, correct any problem
and retry the operation.
Name: pdwpi_s_file_open_error
Number: 0x35f02004 (904929284)
Severity: Error
Component: pic / pd_wpi_s
AMZIC0005E Could not open file %s: system error:
%s (system error code: %d).
Explanation: The identified file could not be opened
for the specified reason.
Action: Check to ensure that file exists and has the
correct permissions.
Name: pdwpi_m_sys_file_open_error
Number: 0x35f02005 (904929285)
Severity: Error
Component: pic / pd_wpi_s
AMZIC0006E Could not log the specified message.
AMZIC0008I A response has been generated and the
connection with the browser should be
kept open.
Explanation: A response is being built up for
transmission to the client. The connection between the
client and the Web server will be kept open if possible.
Action: No action is required.
Name: pdwpi_s_plugin_rsp_pending_ keep_alive
Number: 0x35f02008 (904929288)
Severity: Notice
Component: pic / pd_wpi_s
An authent
tion has completed successfully
resulting in a response being generated
for the client.
Explanation: This message is returned by an
authentication module’s authenticate routine when an
authentication completes successfully and a response
(such as a redirect back to original URL) has also been
generated.
Action: No action is required.
Name: pdwpi_s_rsp_pending_authn_complete_
NO_LONGER_USED
Number: 0x35f02009 (904929289)
Severity: Notice
Component: pic / pd_wpi_s
Explanation: A message could not be written to a log
file.
A transiti
Action: Ensure the file system on which the log files
reside has available capacity.
Explanation: A response is being built up for
transmission to the client. The Web server’s default
response body will be used.
Name: pdwpi_s_log_failed
Number: 0x35f02006 (904929286)
l response with no body has been set.
Action: No action is required.
Severity: Error
Name: pdwpi_s_rsp_no_body_pending_
NO_LONGER_USED
Component: pic / pd_wpi_s
Number: 0x35f0200a (904929290)
Severity: Notice
Component: pic / pd_wpi_s
272
Error Message Reference
AMZIC0012E Memory could not be allocated.
Explanation: An error occurred when the process
attempted to allocate memory from the heap. There is
not enough free memory available to complete the
request.
Action: Examine the system for processes consuming
excessive memory and restart them and ensure the
system has sufficient physical and virtual memory for
its expected load. If the problem persists, contact your
IBM service representative.
Name: pdwpi_s_no_memory
Severity: Error
Component: pic / pd_wpi_s
AMZIC0016E The object has not been initialized.
Explanation: An attempt has been made to use an
uninitialized object.
Action: Examine additional messages to determine the
cause of the error and correct the problem. Restart the
process. If the problem persists, contact your IBM
service representative.
Name: pdwpi_s_not_initialized
Number: 0x35f0200c (904929292)
Number: 0x35f02010 (904929296)
Severity: Error
Severity: Error
Component: pic / pd_wpi_s
Component: pic / pd_wpi_s
AMZIC0013E An allocator with outstanding
allocations may not be deleted.
Explanation: An internal memory allocation service
returned an error because an attempt was made to
remove the service while it was still in use.
Action: Contact your IBM service representative.
Name: pdwpi_s_outstanding_allocations
Number: 0x35f0200d (904929293)
AMZIC0017E Initialization of the trace component
failed.
Explanation: Initialization of the trace component
failed.
Action: Examine additional messages to determine the
cause of the error and correct the problem. Restart the
process. If the problem persists, contact your IBM
service representative.
Name: pdwpi_s_trace_initialization_ failed
Severity: Error
Number: 0x35f02011 (904929297)
Component: pic / pd_wpi_s
Severity: Error
AMZIC0014E An allocator with %d outstanding
allocations may not be deleted.
Component: pic / pd_wpi_s
Explanation: An internal memory allocation service
returned an error because an attempt was made to
remove the service while it was still in use.
AMZIC0018E An unknown internal exception has
occurred.
Action: Contact your IBM service representative.
Name: pdwpi_m_outstanding_allocations
Explanation: An unexpected error condition has
occurred.
Severity: Error
Action: Examine the log files for other error
information and correct any indicated problems. If this
message continues to appear, contact your IBM service
representative.
Component: pic / pd_wpi_s
Name: pdwpi_s_unknown_internal_exception
Number: 0x35f0200e (904929294)
Number: 0x35f02012 (904929298)
AMZIC0015E The object is already initialized.
Explanation: An attempt has been made to initialize
an object that has already been initialized.
Action: Examine additional messages to determine the
cause of the error and correct the problem. Restart the
process. If the problem persists, contact your IBM
service representative.
Name: pdwpi_s_already_initialized
Number: 0x35f0200f (904929295)
Severity: Error
Component: pic / pd_wpi_s
AMZIC0019E An authorization API failure has
occurred.
Explanation: A call to the authorization API failed
with an unexpected error.
Action: Examine the log for the context of the failure
and contact your IBM service representative.
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
273
Name: pdwpi_s_aznapi_failure
Number: 0x35f02013 (904929299)
Severity: Error
Component: pic / pd_wpi_s
Action: Examine the log for the context of the failure
and correct any indicated problem. In particular, ensure
that your user registry is available and accessible. If the
problem persists, contact your IBM service
representative.
Name: pdwpi_m_ivauthn_failure
AMZIC0020E An authorization API failure has
occurred: API error: %s (API error code:
[%#x:%#x]).
Explanation: A call to the authorization API failed
with an unexpected error.
Action: Examine the log for the context of the failure
and contact your IBM service representative.
Name: pdwpi_m_aznapi_failure
Number: 0x35f02014 (904929300)
Severity: Error
Component: pic / pd_wpi_s
Number: 0x35f02017 (904929303)
Severity: Error
Component: pic / pd_wpi_s
AMZIC0024E An invalid transaction has been passed
to the authorization server message
unmarshaller.
Explanation: The transaction that was passed to the
unmarshaller in the Tivoli Access Manager Plug-in for
Web Servers authorization server was incorrect.
Action: Contact your IBM service representative.
Name: pdwpi_s_invalid_transaction
AMZIC0021E An authorization API failure has
occurred: API error code: [%#x:%#x]
Explanation: A call to the authorization API failed
with an unexpected error.
Action: Examine the log for the context of the failure
and contact your IBM service representative.
Name: pdwpi_m_aznapi_failure_no_string
Number: 0x35f02015 (904929301)
Severity: Error
Component: pic / pd_wpi_s
Number: 0x35f02018 (904929304)
Severity: Error
Component: pic / pd_wpi_s
AMZIC0025E An unsupported command was passed
from the authorization server to the
plug-in.
Explanation: A command that has been passed from
the Tivoli Access Manager Plug-in for Web Servers
authorization server to the plug-in is not actually
supported by the plug-in.
Action: Contact your IBM service representative.
AMZIC0022E An authentication system failure has
occurred.
Explanation: A call to the authentication system failed
with an unexpected error.
Action: Examine the log for the context of the failure
and correct any indicated problem. In particular, ensure
that your user registry is available and accessible. If the
problem persists, contact your IBM service
representative.
Name: pdwpi_s_unsupported_proxy_command
Number: 0x35f02019 (904929305)
Severity: Error
Component: pic / pd_wpi_s
AMZIC0026E An invalid command was passed from
the authorization server to the plug-in.
Number: 0x35f02016 (904929302)
Explanation: A command that has been passed from
the Tivoli Access Manager Plug-in for Web Servers
authorization server to the plug-in is not valid.
Severity: Error
Action: Contact your IBM service representative.
Component: pic / pd_wpi_s
Name: pdwpi_s_invalid_proxy_command
Name: pdwpi_s_ivauthn_failure
Number: 0x35f0201a (904929306)
AMZIC0023E An authentication system failure has
occurred: error: %s (error code: %#x).
Explanation: A call to the authentication system failed
with an unexpected error.
274
Error Message Reference
Severity: Error
Component: pic / pd_wpi_s
AMZIC0029I Tivoli Access Manager Plug-in for Web
Servers Authorization Server Manager
v%s
AMZIC0033E The Active Directory Services Interface
is already initialized for a single
threaded environment.
Explanation: This message is displayed when the
Tivoli Access Manager Plug-in for Web Servers
authorization server manager is first started.
Explanation: The Active Directory Services Interface is
used to access IIS configuration information. The
interface could not be initialized in the multi threaded
manner required by Tivoli Access Manager Plug-in for
Web Servers.
Action: No action is required.
Name: pdwpi_m_proxy_mgr_version_tag
Number: 0x35f0201d (904929309)
Action: Contact your IBM service representative.
Name: pdwpi_m_adsi_initialized_as_sta
Severity: Notice
Number: 0x35f02021 (904929313)
Component: pic / pd_wpi_s
Severity: Error
AMZIC0030E The initialization of the server failed:
error ’%s’ (error code: %#x).
Explanation: The server failed to initialize due to an
internal error.
Action: Examine the log file for other error conditions
and correct any indicated problems. If the problem
persists, contact your IBM service representative.
Name: pdwpi_m_initialization_failed
Number: 0x35f0201e (904929310)
Component: pic / pd_wpi_s
AMZIC0034E The Active Directory Services Interface
is already initialized for a single
threaded environment.
Explanation: The Active Directory Services Interface is
used to access IIS configuration information. The
interface could not be initialized in the multi threaded
manner required by Tivoli Access Manager Plug-in for
Web Servers.
Action: Contact your IBM service representative.
Severity: Error
Name: pdwpi_s_adsi_initialized_as_sta
Component: pic / pd_wpi_s
Number: 0x35f02022 (904929314)
AMZIC0031I Initializing the authorization server.
Severity: Error
Explanation: This message is generated when the
Tivoli Access Manager Plug-in for Web Servers
authorization server is being initialized.
Component: pic / pd_wpi_s
Action: No action is required.
Name: pdwpi_m_server_is_initializing
Explanation: The Active Directory Services Interface is
used to access IIS configuration information. The
interface could not be initialized for the reason
indicated.
Number: 0x35f0201f (904929311)
Severity: Notice
Component: pic / pd_wpi_s
AMZIC0032I The authorization server is ready.
Explanation: This message indicates that the server is
available for processing requests.
Action: No action is required.
Name: pdwpi_m_server_is_ready
Number: 0x35f02020 (904929312)
Severity: Notice
Component: pic / pd_wpi_s
AMZIC0035E The Active Directory Services Interface
could not be initialized: ADSI error: %s
(ADSI error code: %#x).
Action: Take action to correct the problem indicated. If
the problem persists, contact your IBM service
representative.
Name: pdwpi_m_adsi_initialization_failed
Number: 0x35f02023 (904929315)
Severity: Error
Component: pic / pd_wpi_s
AMZIC0036E The Active Directory Services Interface
could not be initialized: ADSI error
code: %#x
Explanation: The Active Directory Services Interface is
used to access IIS configuration information. The
interface could not be initialized for the error indicated
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
275
and no text corresponding to the error code could be
found.
Action: Take action to correct the problem indicated. If
the problem persists, contact your IBM service
representative.
Name: pdwpi_m_adsi_initialization_ failed_no_string
Number: 0x35f02024 (904929316)
Severity: Error
Number: 0x35f02027 (904929319)
Severity: Error
Component: pic / pd_wpi_s
AMZIC0040E The value of ’%S’ property could not
be retrieved because it is of type %#x
instead of the expected integer type.
Component: pic / pd_wpi_s
Explanation: The Active Directory Services Interface is
used to access IIS configuration information. A property
of an object was not of an expected type and therefore
could not be retrieved.
AMZIC0037E The Active Directory Services Interface
could not be initialized.
Action: Contact your IBM service representative.
Explanation: The Active Directory Services Interface is
used to access IIS configuration information. The
interface could not be initialized for the reason
indicated.
Action: Examine earlier messages in the log
containing this message for more detailed information
about the failure. Review these, correct any problem
and retry the operation. If the problem persists, contact
your IBM service representative.
Name: pdwpi_s_adsi_initialization_failed
Number: 0x35f02025 (904929317)
Severity: Error
Component: pic / pd_wpi_s
Name: pdwpi_m_adsi_property_invalid_ type_int
Number: 0x35f02028 (904929320)
Severity: Error
Component: pic / pd_wpi_s
AMZIC0041E The value of ’%S’ property could not
be retrieved because it is of type %#x
instead of the expected unsigned integer
type.
Explanation: The Active Directory Services Interface is
used to access IIS configuration information. A property
of an object was not of an expected type and therefore
could not be retrieved.
Action: Contact your IBM service representative.
AMZIC0038E The requested value could not be
retrieved because it is not of the
requested type.
Explanation: The Active Directory Services Interface is
used to access IIS configuration information. A property
of an object was not of an expected type and therefore
could not be retrieved.
Action: Contact your IBM service representative.
Name: pdwpi_s_adsi_property_invalid_type
Number: 0x35f02026 (904929318)
Severity: Error
Component: pic / pd_wpi_s
Name: pdwpi_m_adsi_property_invalid_ type_uint
Number: 0x35f02029 (904929321)
Severity: Error
Component: pic / pd_wpi_s
AMZIC0042E The value of ’%S’ property could not
be retrieved because it is of type %#x
instead of the expected string type.
Explanation: The Active Directory Services Interface is
used to access IIS configuration information. A property
of an object was not of an expected type and therefore
could not be retrieved.
Action: Contact your IBM service representative.
AMZIC0039E The value of ’%S’ property could not
be retrieved because it is of type %#x
instead of the expected Boolean type.
Explanation: The Active Directory Services Interface is
used to access IIS configuration information. A property
of an object was not of an expected type and therefore
could not be retrieved.
Action: Contact your IBM service representative.
Name: pdwpi_m_adsi_property_invalid_ type_bool
276
Error Message Reference
Name: pdwpi_m_adsi_property_invalid_ type_string
Number: 0x35f0202a (904929322)
Severity: Error
Component: pic / pd_wpi_s
AMZIC0043E The value of ’%S’ property could not
be retrieved because it is of type %#x
instead of the expected array of string
type.
Explanation: The Active Directory Services Interface is
used to access IIS configuration information. A property
of an object was not of an expected type and therefore
could not be retrieved.
unexpected error occurred while accessing Active
Directory for configuration information.
Action: Examine the log for further details and if the
problem persists, contact your IBM service
representative.
Name: pdwpi_m_adsi_failure
Number: 0x35f0202e (904929326)
Action: Contact your IBM service representative.
Severity: Error
Name: pdwpi_m_adsi_property_invalid_
type_array_of_string
Component: pic / pd_wpi_s
Number: 0x35f0202b (904929323)
AMZIC0047E An unexpected error occurred
accessing the Active Directory Services
Interface: ADSI error code: %#x
Severity: Error
Component: pic / pd_wpi_s
AMZIC0044E An invalid integer size was specified
when setting a property to an integer
value.
Explanation: The Active Directory Services Interface is
used to access IIS configuration information. A new
integer value for a property of an object was not
specified correctly.
Action: Contact your IBM service representative.
Name: pdwpi_s_adsi_invalid_int_size
Explanation: The Active Directory Services Interface is
used to access IIS configuration information. An
unexpected error occurred while accessing Active
Directory for configuration information.
Action: Examine the log for further details and if the
problem persists, contact your IBM service
representative.
Name: pdwpi_m_adsi_failure_no_string
Number: 0x35f0202f (904929327)
Severity: Error
Component: pic / pd_wpi_s
Number: 0x35f0202c (904929324)
Severity: Error
AMZIC0048E The Active Directory object that is not
a container was accessed as a container.
Component: pic / pd_wpi_s
AMZIC0045E An unexpected error occurred while
accessing the Active Directory Services
Interface.
Explanation: The Active Directory Services Interface is
used to access IIS configuration information. An
unexpected error occurred while accessing Active
Directory for configuration information.
Explanation: The Active Directory Services Interface is
used to access IIS configuration information. An Active
Directory object is being accessed as a container of
other objects but it is not permitted to be a container.
Action: Contact your IBM service representative.
Name: pdwpi_s_adsi_object_not_container
Number: 0x35f02030 (904929328)
Action: Examine the log for further details and if the
problem persists, contact your IBM service
representative.
Severity: Error
Name: pdwpi_s_adsi_failure
AMZIC0049E The Active Directory object cannot be
created because it already exists.
Number: 0x35f0202d (904929325)
Component: pic / pd_wpi_s
Explanation: The Active Directory Services Interface is
used to access IIS configuration information. An Active
Directory object cannot be created because it already
exists.
Severity: Error
Component: pic / pd_wpi_s
AMZIC0046E An unexpected error occurred while
accessing the Active Directory Services
Interface: ADSI error: %s (ADSI error
code: %d).
Action: Examine the log for other error information
and if this condition is generating a more severe failure,
contact your IBM service representative.
Explanation: The Active Directory Services Interface is
used to access IIS configuration information. An
Number: 0x35f02031 (904929329)
Name: pdwpi_s_adsi_object_already_exists
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
277
Severity: Error
Severity: Error
Component: pic / pd_wpi_s
Component: pic / pd_wpi_s
AMZIC0050E The Active Directory object does not
exist.
AMZIC0054E A system routine failed.
Explanation: The Active Directory Services Interface is
used to access IIS configuration information. An Active
Directory object cannot be accessed because it does not
exist.
Action: Examine the log for other error information
and if this condition is generating a more severe failure,
contact your IBM service representative.
Name: pdwpi_s_adsi_object_does_not_exist
Explanation: A system routine failed.
Action: Examine log for additional information and if
the problem persists, contact your IBM service
representative.
Name: pdwpi_s_system_error
Number: 0x35f02036 (904929334)
Severity: Error
Component: pic / pd_wpi_s
Number: 0x35f02032 (904929330)
Severity: Error
Component: pic / pd_wpi_s
AMZIC0051E The resource does not exist.
Explanation: A resource being accessed does not exist.
Action: Examine log for additional information and if
the problem persists, contact your IBM service
representative.
Name: pdwpi_s_does_not_exist
Number: 0x35f02033 (904929331)
Severity: Error
Component: pic / pd_wpi_s
AMZIC0052E Access is denied.
AMZIC0055E The %s system routine failed: system
error: %s (system error code: %d).
Explanation: A system routine failed for the indicated
reason.
Action: Examine log for additional information and if
the problem persists, contact your IBM service
representative.
Name: pdwpi_m_system_error
Number: 0x35f02037 (904929335)
Severity: Error
Component: pic / pd_wpi_s
AMZIC0056E The %s system routine failed: system
error code: %d
Explanation: Insufficient permission to access a
resource.
Explanation: A system routine failed and for the
reason indicated by the system error code. No text
corresponding to the error code could be determined.
Action: Examine log for additional information and if
the problem persists, contact your IBM service
representative.
Action: Examine log for additional information and if
the problem persists, contact your IBM service
representative.
Name: pdwpi_s_access_denied
Name: pdwpi_m_system_error_no_string
Number: 0x35f02034 (904929332)
Number: 0x35f02038 (904929336)
Severity: Error
Severity: Error
Component: pic / pd_wpi_s
Component: pic / pd_wpi_s
AMZIC0053E Input data to a system routine is
invalid.
AMZIC0057E A Unicode string could not be
converted to a multi-byte character
string.
Explanation: Input data to a system routine is invalid.
Action: Examine log for additional information and if
the problem persists, contact your IBM service
representative.
Explanation: A Unicode string could not be converted
to a multi-byte character string.
Action: Contact your IBM service representative.
Name: pdwpi_s_invalid_data
Name: pdwpi_s_unicode_mbcs_conversion_ failure
Number: 0x35f02035 (904929333)
Number: 0x35f02039 (904929337)
278
Error Message Reference
Severity: Error
AMZIC0063I Upgrading configuration from version
%s to version %s.
Component: pic / pd_wpi_s
Explanation: A Unicode string could not be converted
to a multi-byte character string.
Explanation: While initializing, the Tivoli Access
Manager Plug-in for Web Servers authorization server
has detected a configuration file corresponding to the
prior version indicated and is automatically upgrading
it to the current version. All existing configuration will
be preserved and the original configuration file has
been backed up.
Action: Contact your IBM service representative.
Action: No action is required.
Name: pdwpi_m_unicode_mbcs_conversion_ failure
Name: pdwpi_m_upgrading
Number: 0x35f0203a (904929338)
Number: 0x35f0203f (904929343)
Severity: Error
Severity: Notice
Component: pic / pd_wpi_s
Component: pic / pd_wpi_s
AMZIC0059E A multi-byte character string could not
be converted to a Unicode string.
AMZIC0064I The HTTP method is not recognized.
Explanation: A multi-byte character string could not
be converted to a Unicode string.
Explanation: HTTP permits the extension of the
protocol by adding new methods. This status merely
indicates that such a request has been received.
Action: Contact your IBM service representative.
Action: No action is required.
Name: pdwpi_s_mbcs_unicode_conversion_ failure
Name: pdwpi_s_http_unrecognized_method
Number: 0x35f0203b (904929339)
Number: 0x35f02040 (904929344)
Severity: Error
Severity: Notice
Component: pic / pd_wpi_s
Component: pic / pd_wpi_s_http
AMZIC0060E A multi-byte character string could not
be converted to a Unicode string: %s
AMZIC0065E HTTP message has an invalid HTTP
version specifier in the request or status
line.
AMZIC0058E A Unicode string could not be
converted to a multi-byte character
string: %S
Explanation: A multi-byte character string could not
be converted to a Unicode string.
Action: Contact your IBM service representative.
Name: pdwpi_m_mbcs_unicode_conversion_ failure
Explanation: The HTTP message has an invalid HTTP
version specifier in the request or status line. The
correct format is: ’HTTP/<major>.<minor>’.
Severity: Error
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP message.
Component: pic / pd_wpi_s
Name: pdwpi_s_http_bad_version
Number: 0x35f0203c (904929340)
Number: 0x35f02041 (904929345)
AMZIC0061E This system error code could not be
converted to an error string.
Explanation: The system error code has no equivalent
error string.
Action: No action is required.
Name: pdwpi_s_no_system_error_message
Number: 0x35f0203d (904929341)
Severity: Error
Component: pic / pd_wpi_s
Severity: Error
Component: pic / pd_wpi_s_http
AMZIC0066E HTTP request has an invalid URI in
the request line.
Explanation: The received HTTP request has an
invalid URI in the request line.
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP request.
Name: pdwpi_s_http_missing_uri
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
279
Number: 0x35f02042 (904929346)
Severity: Error
Component: pic / pd_wpi_s_http
AMZIC0067E The HTTP message is missing an
HTTP version specifier in the request or
status line.
Explanation: The received HTTP message has no
HTTP version specifier in the request or status line.
HTTP version specifiers are required.
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP message.
AMZIC0070E The HTTP POST data is not correctly
terminated.
Explanation: The POST data of the received HTTP
request is not correctly terminated. HTTP POST data
must be terminated with CR LF.
Action: Investigate whether the client or other Web
server plug-in software is generating invalid HTTP
POST data.
Name: pdwpi_s_http_unterminated_post_ data
Number: 0x35f02046 (904929350)
Severity: Error
Component: pic / pd_wpi_s_http
Name: pdwpi_s_http_missing_version
Number: 0x35f02043 (904929347)
Severity: Error
Component: pic / pd_wpi_s_http
AMZIC0068E The HTTP request line is not correctly
terminated.
Explanation: The request line of the received HTTP
request is not correctly terminated. HTTP request lines
must be terminated with CR LF.
Action: Investigate whether the client or other Web
server plug-in software is generating an invalid HTTP
request.
Name: pdwpi_s_http_unterminated_request_ line
AMZIC0071E The HTTP POST data item is not
correctly delimited from the data item’s
value.
Explanation: HTTP POST data item names must be
separated from their values by an equal sign: ’=’. This
error indicates that the valid POST data characters were
not followed by an equal sign.
Action: Either the Web browser or other plug-in
software to the Web server is generating invalid HTTP
POST data.
Name: pdwpi_s_http_bad_post_data_ delimiter
Number: 0x35f02047 (904929351)
Severity: Error
Component: pic / pd_wpi_s_http
Number: 0x35f02044 (904929348)
Severity: Error
Component: pic / pd_wpi_s_http
AMZIC0072E The HTTP POST data is not correctly
formatted.
AMZIC0069E An HTTP header name is not correctly
delimited from the header value.
Explanation: Individual HTTP POST data items must
be separated by an ampersand: ’&’. This error indicates
that the valid POST data characters were not followed
by an ampersand.
Explanation: HTTP headers must be separated from
their values by a colon: ’:’. This error indicates that the
valid header characters were not followed by a colon.
Action: Either the Web browser or other plug-in
software to the Web server is generating invalid HTTP
POST data.
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP message.
Name: pdwpi_s_http_bad_post_data
Name: pdwpi_s_http_bad_header_delimiter
Severity: Error
Number: 0x35f02045 (904929349)
Component: pic / pd_wpi_s_http
Number: 0x35f02048 (904929352)
Severity: Error
Component: pic / pd_wpi_s_http
AMZIC0073E An HTTP header is unterminated.
Explanation: HTTP header lines in an HTTP message
must be terminated by CR LF. A header line in the
message was not terminated in this manner.
Action: Either the Web browser or other plug-in
280
Error Message Reference
software to the Web server is generating an invalid
HTTP message.
Component: pic / pd_wpi_s_http
Name: pdwpi_s_http_unterminated_header
AMZIC0077E A cookie Domain parameter was
specified but no value is present.
Number: 0x35f02049 (904929353)
Explanation: A cookie Domain parameter was
specified but no value is present.
Severity: Error
Component: pic / pd_wpi_s_http
AMZIC0074E The HTTP message ended
unexpectedly.
Explanation: A received HTTP request or response is
incomplete.
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP message or whether there are networking
problems in the Web server’s environment.
Name: pdwpi_s_http_end_of_buffer
Number: 0x35f0204a (904929354)
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP message.
Name: pdwpi_s_http_cookie_missing_ domain_value
Number: 0x35f0204d (904929357)
Severity: Error
Component: pic / pd_wpi_s_http
AMZIC0078E A cookie Path parameter was specified
but no value is present.
Explanation: A cookie is malformed. The cookie Path
parameter was specified but no value is present.
Severity: Error
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP message.
Component: pic / pd_wpi_s_http
AMZIC0075E An HTTP cookie with an invalid
parameter name was found in either a
’Cookie:’ or ’Set-Cookie:’ header.
Name: pdwpi_s_http_cookie_missing_ path_value
Number: 0x35f0204e (904929358)
Explanation: An HTTP cookie with an invalid
parameter name was found in either a Cookie or
Set-Cookie header. Valid names for the Cookie header
are $Version, $Path, and $Domain. Valid names for the
Set-Cookie header are Version, Path, Domain,
Comment, Secure, Max-Age, and Expires.
Severity: Error
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP message.
Explanation: A cookie is malformed. The cookie
Version parameter was specified but no value is
present.
Name: pdwpi_s_http_cookie_bad_param_name
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP message.
Number: 0x35f0204b (904929355)
Severity: Error
Number: 0x35f0204f (904929359)
AMZIC0076E The cookie parameter value could not
be interpreted.
Explanation: A cookie parameter value could not be
interpreted.
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP message.
Name: pdwpi_s_http_cookie_bad_param_ value
Severity: Error
AMZIC0079E A cookie Version parameter was
specified but no value is present.
Name: pdwpi_s_http_cookie_missing_ version_value
Component: pic / pd_wpi_s_http
Number: 0x35f0204c (904929356)
Component: pic / pd_wpi_s_http
Severity: Error
Component: pic / pd_wpi_s_http
AMZIC0080E A cookie Max-Age parameter was
specified but no value is present.
Explanation: A cookie is malformed. The cookie
Max-Age parameter was specified but no value is
present.
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP message.
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
281
Name: pdwpi_s_http_cookie_missing_ max_age_value
Number: 0x35f02050 (904929360)
Severity: Error
Component: pic / pd_wpi_s_http
AMZIC0081E A cookie Secure parameter was
specified and a value is unexpectedly
present.
Explanation: A cookie is malformed. The cookie
Secure parameter was specified and a value is
unexpectedly present. The Secure cookie parameter
does not have a value.
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP message.
Name: pdwpi_s_http_cookie_unexpected_
secure_value
Number: 0x35f02051 (904929361)
Severity: Error
Component: pic / pd_wpi_s_http
AMZIC0082E A cookie Comment parameter was
specified but no value is present.
Explanation: A cookie is malformed. The cookie
Comment parameter was specified but no value is
present.
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP message.
Name: pdwpi_s_http_cookie_missing_ comment_value
Number: 0x35f02052 (904929362)
Severity: Error
Component: pic / pd_wpi_s_http
AMZIC0084E A cookie Version value is present but
it is invalid.
Explanation: A cookie is malformed. The cookie
Version value is present but it is invalid. Cookie
Version values must be positive integers.
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP message.
Name: pdwpi_s_http_cookie_bad_version
Number: 0x35f02054 (904929364)
Severity: Error
Component: pic / pd_wpi_s_http
AMZIC0085E A cookie Version parameter was
specified but no value is present.
Explanation: A cookie is malformed. The cookie
Version parameter was specified but no value is
present.
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP message.
Name: pdwpi_s_http_cookie_no_version_ value
Number: 0x35f02055 (904929365)
Severity: Error
Component: pic / pd_wpi_s_http
AMZIC0086E An incorrect delimiter was
encountered while processing a cookie.
Explanation: Valid delimiters in cookie strings are
comma and semi-colon (’,’ and ’;’).
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP message.
Name: pdwpi_s_http_cookie_bad_delimiter
AMZIC0083E A cookie Expires parameter was
specified but no value is present.
Explanation: A cookie is malformed. The cookie
Expires parameter was specified but no value is
present.
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP message.
Name: pdwpi_s_http_cookie_missing_ expires_value
Number: 0x35f02053 (904929363)
Severity: Error
Component: pic / pd_wpi_s_http
Number: 0x35f02056 (904929366)
Severity: Error
Component: pic / pd_wpi_s_http
AMZIC0087E A cookie Path value is present but it is
invalid.
Explanation: A cookie is malformed. The cookie Path
value is present but it is invalid.
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP message.
Name: pdwpi_s_http_cookie_bad_path
Number: 0x35f02057 (904929367)
282
Error Message Reference
Severity: Error
software to the Web server is generating an invalid
HTTP response.
Component: pic / pd_wpi_s_http
Name: pdwpi_s_http_unterminated_status_ line
AMZIC0088E The HTTP response status code is
invalid.
Number: 0x35f0205b (904929371)
Severity: Error
Explanation: An HTTP response status code is invalid.
Valid response codes consist of three decimal digits.
Component: pic / pd_wpi_s_http
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP response.
AMZIC0092I A response has been set that contains
HTTP authentication headers only.
Number: 0x35f02058 (904929368)
Explanation: A response is being built up for
transmission to the client. The response will request
HTTP authentication by the client.
Severity: Error
Action: No action is required.
Component: pic / pd_wpi_s_http
Name: pdwpi_s_http_auth_rsp_set
Name: pdwpi_s_http_bad_status_code
Number: 0x35f0205c (904929372)
AMZIC0089E The HTTP response status line is
missing the status code.
Explanation: The status line of an HTTP response has
no status code. HTTP response status lines must
include a status code.
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP response.
Name: pdwpi_s_http_missing_status_code
Severity: Notice
Component: pic / pd_wpi_s
AMZIC0093I A response should be generated using
the standard login success page.
Explanation: A response is being built up for
transmission to the client. The response contains an
indication that a login has succeeded.
Action: No action is required.
Number: 0x35f02059 (904929369)
Name: pdwpi_s_login_success
Severity: Error
Number: 0x35f0205d (904929373)
Component: pic / pd_wpi_s_http
Severity: Notice
AMZIC0090E The HTTP response status line is
missing the status reason.
Component: pic / pd_wpi_s
Explanation: The status line of an HTTP response has
no status reason. HTTP response status lines must
include a status reason.
AMZIC0095E The command ″%s″ failed exiting with
code %d: %s.
Action: Either the Web browser or other plug-in
software to the Web server is generating an invalid
HTTP response.
Explanation: The command identified failed with the
given error code.
Name: pdwpi_s_http_missing_reason
Action: Examine the log for additional information
and if the problem persists, contact your IBM support
representative.
Number: 0x35f0205a (904929370)
Name: pdwpi_m_command_failed_with_output
Severity: Error
Number: 0x35f0205f (904929375)
Component: pic / pd_wpi_s_http
Severity: Error
Component: pic / pd_wpi_s
AMZIC0091E The HTTP response status line is
unterminated.
Explanation: The status line of an HTTP response is
not correctly terminated. HTTP response status lines
must be terminated by CR LF.
Action: Either the Web browser or other plug-in
AMZIC0128E A header could not be set in the
request.
Explanation: The processing of the request by the
Tivoli Access Manager Plug-in for Web Servers
authorization server required that a header be set in the
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
283
request before processing by the Web server. This
operation has failed.
Action: Look earlier in the log for the reason why the
header was unable to be set.
Name: pdwpi_s_iis_unable_to_set_header_ in_request
Number: 0x35f02080 (904929408)
Severity: Error
Component: pic / pd_wpi_s_iis
be deleted from the request before processing by the
Web server. This operation failed for the indicated
reason.
Action: The error code is a Windows error code and
will indicate the reason why the header could not be
deleted. If the problem persists, contact your IBM
service representative.
Name: pdwpi_m_iis_unable_to_delete_
header_from_request
Number: 0x35f02083 (904929411)
AMZIC0129E The header ’%s: %s’ could not be set
in the request: system error: %s (system
error code: %d).
Explanation: The processing of the request by the
Tivoli Access Manager Plug-in for Web Servers
authorization server required that a new header be set
in the request before processing by the Web server. This
operation failed for the indicated reason.
Action: The error code is a Windows error code and
will indicate the reason why the header could not be
set. If the problem persists, contact your IBM service
representative.
Name: pdwpi_m_iis_unable_to_set_header_ in_request
Number: 0x35f02081 (904929409)
Severity: Error
Component: pic / pd_wpi_s_iis
Severity: Error
Component: pic / pd_wpi_s_iis
AMZIC0132E A header could not be added to the
request.
Explanation: The processing of the request by the
Tivoli Access Manager Plug-in for Web Servers
authorization server required that a header be added to
the request before processing by the Web server. This
operation has failed.
Action: Examine earlier messages in the log
containing this message for more detailed information
about the failure. Review these, correct any problem
and retry the operation. If the problem persists, contact
your IBM service representative.
Name: pdwpi_s_iis_unable_to_add_header_ to_request
Number: 0x35f02084 (904929412)
AMZIC0130E A header could not be deleted from
the request.
Explanation: The processing of the request by the
Tivoli Access Manager Plug-in for Web Servers
authorization server required that a header be deleted
from the request before processing by the Web server.
This operation has failed.
Action: Examine earlier messages in the log
containing this message for more detailed information
about the failure. Review these, correct any problem
and retry the operation. If the problem persists, contact
your IBM service representative.
Name: pdwpi_s_iis_unable_to_delete_
header_from_request
Number: 0x35f02082 (904929410)
Severity: Error
Component: pic / pd_wpi_s_iis
Severity: Error
Component: pic / pd_wpi_s_iis
AMZIC0133E The header ’%s: %s’ could not be
added to the request: system error: %s
(system error code: %d).
Explanation: The processing of the request by the
Tivoli Access Manager Plug-in for Web Servers
authorization server required that the specified header
be added to the request before processing by the Web
server. This operation failed for the indicated reason.
Action: The error code is a Windows error code and
will indicate the reason why the header could not be
added. If the problem persists, contact your IBM
service representative.
Name: pdwpi_m_iis_unable_to_add_header_
to_request
Number: 0x35f02085 (904929413)
AMZIC0131E The ’%s’ header could not be deleted
from the request: system error: %s,
(system error code: %d).
Explanation: The processing of the request by the
Tivoli Access Manager Plug-in for Web Servers
authorization server required that the specified header
284
Error Message Reference
Severity: Error
Component: pic / pd_wpi_s_iis
AMZIC0134E A header could not be added to the
response.
Explanation: The processing of the request by the
Tivoli Access Manager Plug-in for Web Servers
authorization server required that a header be added to
the request’s response. This operation has failed.
Action: Examine earlier messages in the log
containing this message for more detailed information
about the failure. Review these, correct any problem
and retry the operation. If the problem persists, contact
your IBM service representative.
Name: pdwpi_s_iis_unable_to_add_header_
to_response
AMZIC0137E The response headers could not be
sent to the client: system error: %s
(system error code: %d).
Explanation: The response headers could not be sent
to the client.
Action: The error code is a Windows error code and
will indicate the reason why the response headers
could not be sent to the client. If the problem persists,
contact your IBM service representative.
Name: pdwpi_m_iis_unable_to_send_
response_headers
Number: 0x35f02089 (904929417)
Severity: Error
Number: 0x35f02086 (904929414)
Component: pic / pd_wpi_s_iis
Severity: Error
Component: pic / pd_wpi_s_iis
AMZIC0138E The response body could not be sent
to the client.
AMZIC0135E The header ’%s: %s’ could not be
added to the response: system error: %s
(system error code: %d).
Explanation: The processing of the request by the
Tivoli Access Manager Plug-in for Web Servers
authorization server required that the specified header
be added to the request’s response. This operation
failed for the indicated reason.
Action: The error code is a Windows error code and
will indicate the reason why the header could not be
added. If the problem persists, contact your IBM
service representative.
Name: pdwpi_m_iis_unable_to_add_header_
to_response
Number: 0x35f02087 (904929415)
Severity: Error
Explanation: The response body could not be sent to
the client.
Action: Examine earlier messages in the log
containing this message for more detailed information
about the failure. Review these, correct any problem
and retry the operation.
Name: pdwpi_s_iis_unable_to_send_ response_body
Number: 0x35f0208a (904929418)
Severity: Error
Component: pic / pd_wpi_s_iis
AMZIC0139E The response body could not be sent
to the client: system error: %s (system
error code: %d).
Component: pic / pd_wpi_s_iis
Explanation: The response body could not be sent to
the client.
AMZIC0136E The response headers could not be
sent to the client.
Action: The error code is a Windows error code and
will indicate the reason why the response could not be
sent to the client. If the problem persists, contact your
IBM service representative.
Explanation: The response headers could not be sent
to the client.
Action: Examine earlier messages in the log
containing this message for more detailed information
about the failure. Review these, correct any problem
and retry the operation.
Name: pdwpi_s_iis_unable_to_send_
response_headers
Number: 0x35f02088 (904929416)
Severity: Error
Component: pic / pd_wpi_s_iis
Name: pdwpi_m_iis_unable_to_send_ response_body
Number: 0x35f0208b (904929419)
Severity: Error
Component: pic / pd_wpi_s_iis
AMZIC0140E An incorrectly specified cookie has
been omitted from a response:
%.*s=%.*s
Explanation: An incorrectly specified cookie has been
omitted from a response.
Action: Contact your IBM service representative.
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
285
Name: pdwpi_m_iis_bad_cookie_omitted_
from_response
Component: pic / pd_wpi_s_iis
Number: 0x35f0208c (904929420)
AMZIC0145E An unexpected request handler result
was returned to the Tivoli Access
Manager Plug-in for IIS ISAPI filter:
%#x.
Severity: Error
Component: pic / pd_wpi_s_iis
AMZIC0141E The remote address could not be
parsed as an IPv4 address.
Explanation: The remote address could not be parsed
as an IPv4 address.
Action: Contact your IBM service representative.
Name: pdwpi_s_iis_bad_remote_addr
Number: 0x35f0208d (904929421)
Severity: Error
Component: pic / pd_wpi_s_iis
Explanation: An unexpected request handler result
was returned to the ISAPI filter.
Action: Contact your IBM service representative.
Name: pdwpi_m_iis_unexpected_req_ handler_result
Number: 0x35f02091 (904929425)
Severity: Error
Component: pic / pd_wpi_s_iis
AMZIC0146E A response is to be generated but no
response code has been specified.
Explanation: A reference to an invalid request cookie
set has occurred.
Explanation: The request has been handled by the
Tivoli Access Manager Plug-in for Web Servers
authorization server and an HTTP response is to be
generated; however no response code has been set by
the Tivoli Access Manager Plug-in for Web Servers
authorization server.
Action: Contact your IBM service representative.
Action: Contact your IBM service representative.
Name: pdwpi_s_iis_bad_request_cookie_set
Name: pdwpi_s_iis_no_response_code
Number: 0x35f0208e (904929422)
Number: 0x35f02092 (904929426)
Severity: Error
Severity: Error
Component: pic / pd_wpi_s_iis
Component: pic / pd_wpi_s_iis
AMZIC0143E A reference to an invalid request URI
has occurred.
AMZIC0147E The minimum post data size of ’%s’
specified for URI ’%s’ is invalid. The
value must be a positive integer.
AMZIC0142E A reference to an invalid request
cookie set has occurred.
Explanation: A reference to an invalid request URI has
occurred.
Name: pdwpi_s_iis_bad_request_uri
Explanation: The minimum POST data size for a URI
must be specified as a positive integer representing the
minimum number of bytes of POST data to read in the
request.
Number: 0x35f0208f (904929423)
Action: Correct the configuration value.
Severity: Error
Name: pdwpi_m_iis_invalid_minimum_
post_data_size
Action: Contact your IBM service representative.
Component: pic / pd_wpi_s_iis
Number: 0x35f02093 (904929427)
AMZIC0144E A response has been generated with a
content type specified but no body.
Explanation: A response has been generated with a
content type specified but no body.
Action: Contact your IBM service representative.
Name: pdwpi_s_iis_content_type_but_ no_body
Number: 0x35f02090 (904929424)
Severity: Error
286
Error Message Reference
Severity: Error
Component: pic / pd_wpi_s_iis
AMZIC0148E The response headers could not be
added.
Explanation: The processing of the request by the
Tivoli Access Manager Plug-in for Web Servers
authorization server required that headers be added to
the request’s response. This operation has failed.
Action: Examine earlier messages in the log
containing this message for more detailed information
about the failure. Review these, correct any problem
and retry the operation. If the problem persists, contact
your IBM service representative.
Name: pdwpi_s_iis_unable_to_add_response_ headers
Number: 0x35f02094 (904929428)
Severity: Error
Component: pic / pd_wpi_s_iis
AMZIC0152E The Tivoli Access Manager Plug-in for
IIS ISAPI extension is unable to handle
request: error: %s (error code: %#x).
Explanation: The IIS ISAPI extension component of
the IIS plug-in was not able to process the request for
the reason indicated in the message.
Severity: Error
Component: pic / pd_wpi_s_iis
AMZIC0149E The response headers could not be
added: system error: %s (system error
code: %d).
Explanation: The processing of the request by the
Tivoli Access Manager Plug-in for Web Servers
authorization server required that headers be added to
the request’s response. This operation has failed for the
indicated reason.
Action: The error code is a Windows error code and
will indicate the reason why the response headers
could not be added. If the problem persists, contact
your IBM service representative.
Name: pdwpi_m_iis_unable_to_add_response_
headers
Number: 0x35f02095 (904929429)
Action: Correct the problem indicated as the reason
for the initialization failure. If the problem persists,
contact your IBM service representative.
Name: pdwpi_m_iis_extension_unable_
to_handle_request
Number: 0x35f02098 (904929432)
Severity: Error
Component: pic / pd_wpi_s_iis
AMZIC0153W The POST request to URI %s must
supply at least %u bytes of POST data
but only %u bytes are available.
Explanation: The indicated URI is configured to
require a minimum amount of POST data however a
client submitted less than the amount required.
Action: Change the minimum POST data requirement
for this URI or correct the client software. If the
problem persists, contact your IBM service
representative.
Severity: Error
Component: pic / pd_wpi_s_iis
AMZIC0150E IIS global initialization failed: error:
%s (error code: %#x).
Explanation: The IIS plug-in global data could not be
initialized for the reason indicated in the message.
Action: Correct the problem indicated as the reason
for the initialization failure. If the problem persists,
contact your IBM service representative.
Name: pdwpi_m_iis_global_initialization_ failed
Number: 0x35f02096 (904929430)
Severity: Error
Name: pdwpi_m_iis_insufficient_post_data
Number: 0x35f02099 (904929433)
Severity: Warning
Component: pic / pd_wpi_s_iis
AMZIC0154E An invalid command from the
authorization server was received by the
Tivoli Access Manager Plug-in for IIS
ISAPI extension: %#x
Component: pic / pd_wpi_s_iis
Explanation: An invalid command was received from
the Tivoli Access Manager Plug-in for Web Servers
authorization server by the extension component of the
IIS plug-in.
AMZIC0151E Tivoli Access Manager Plug-in for IIS
global initialization failed.
Action: Contact your IBM service representative.
Explanation: The IIS global data could not be
initialized.
Action: Look in the log for additional information
regarding the failure. If the problem persists, contact
your IBM service representative.
Name: pdwpi_m_iis_invalid_proxy_command_
in_extension
Number: 0x35f0209a (904929434)
Severity: Error
Component: pic / pd_wpi_s_iis
Name: pdwpi_s_iis_global_initialization_ failed
Number: 0x35f02097 (904929431)
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
287
AMZIC0155W The IIS Web site %S has an invalid
binding: ’%S’.
Explanation: Server bindings specify the server name,
port, and host header used to identify the Web site to
which a request is addressed. This information is stored
in the IIS configuration database called the metabase.
The Tivoli Access Manager Plug-in for Web Servers
accesses the IIS metabase to discover the IIS
configuration. While reading the IIS configuration
information an ill-formed server binding was
encountered. This invalid server binding will be
ignored and operation will continue as if it were not
present.
request was addressed and the request has been
denied.
Action: Examine the log for further details and modify
the IIS configuration so that such requests can be
unambiguously resolved to a particular Web site or
rejected directly by IIS.
Name: pdwpi_s_iis_ambiguous_request
Number: 0x35f0209d (904929437)
Severity: Warning
Component: pic / pd_wpi_s_iis
Action: Remove or correct the invalid binding for the
indicated Web Site using the IIS Internet Services
Management tool.
AMZIC0158W A request to %s:%s with host header
’%s’ has been received and could not be
resolved to any IIS Web site.
Name: pdwpi_m_iis_invalid_binding
Explanation: Three properties of a request are used to
identify the IIS Web site to which the request is
received: server port, server address, and Host header.
For the received request the information available in
the request matched none of the configured IIS Web
sites.
Number: 0x35f0209b (904929435)
Severity: Warning
Component: pic / pd_wpi_s_iis
AMZIC0156W A request to %s:%s with host header
’%s’ has been received and cannot be
unambiguously resolved to a specific
IIS Web site. The Tivoli Access Manager
Plug-in for IIS cannot distinguish
between the two sites %s and %s.
Explanation: Three properties of a request are used to
identify the IIS Web site to which the request is
received: server port, server address and Host header.
For the received request the information available in
the request was insufficient to be able to
unambiguously identify the IIS Web site to which the
request was addressed and the request has been
denied.
Action: Modify the IIS configuration so that such
requests can be unambiguously resolved to a particular
Web site or rejected directly by IIS.
Name: pdwpi_m_iis_ambiguous_request
Number: 0x35f0209c (904929436)
Severity: Warning
Component: pic / pd_wpi_s_iis
Action: Modify the IIS configuration so that such
requests can be unambiguously resolved to a particular
Web site or rejected directly by IIS.
Name: pdwpi_m_iis_unresolved_request
Number: 0x35f0209e (904929438)
Severity: Warning
Component: pic / pd_wpi_s_iis
AMZIC0159W A request has been received and
could not be resolved to any IIS Web
site.
Explanation: Three properties of a request are used to
identify the IIS Web site to which the request is
received: server port, server address and Host header.
For the received request the information available in
the request matched none of the configured IIS Web
sites.
Action: Examine the log for further information and
modify the IIS configuration so that such requests can
be unambiguously resolved to a particular Web site or
rejected directly by IIS.
Name: pdwpi_s_iis_unresolved_request
AMZIC0157W A request has been received and
cannot be unambiguously resolved to a
specific IIS Web site.
Number: 0x35f0209f (904929439)
Explanation: Three properties of a request are used to
identify the IIS Web site to which the request is
received: server port, server address and Host header.
For the received request the information available in
the request was insufficient to be able to
unambiguously identify the IIS Web site to which the
Component: pic / pd_wpi_s_iis
288
Error Message Reference
Severity: Warning
AMZIC0160W The IIS Web site %S has an invalid
secure binding: ’%S’.
Explanation: Server bindings specify the server name,
port, and host header used to identify the Web site to
which a request is addressed. This information is stored
in the IIS configuration database called the metabase.
Tivoli Access Manager Plug-in for Web Servers accesses
the IIS metabase to determine the IIS configuration.
While reading the IIS configuration information, an
ill-formed secure server binding was encountered. This
invalid secure server binding will be ignored and
operation will continue as if it were not present.
AMZIC0163E The request header modifications
required for SPNEGO processing could
not be completed: error: %s (error code:
%#x).
Explanation: Part of the handling required for
SPNEGO based authentication schemes involves
modifying the request header internally. This
modification operation has failed for the indicated
reason.
Action: Contact your IBM service representative.
Name: pdwpi_m_iis_spnego_finalize_ header_failed
Action: Remove or correct the invalid secure binding
for the indicated Web site using the IIS Internet
Services Management tool.
Number: 0x35f020a3 (904929443)
Name: pdwpi_m_iis_invalid_secure_binding
Component: pic / pd_wpi_s_iis
Number: 0x35f020a0 (904929440)
Severity: Error
AMZIC0164E The request body modifications
required for SPNEGO processing could
not be completed: error: %s (error code:
%#x).
Severity: Warning
Component: pic / pd_wpi_s_iis
AMZIC0161E The request URI could not be set
during SPNEGO processing: error: %s
(error code: %#x).
Explanation: Part of the handling required for
SPNEGO based authentication schemes involves
modifying the URI of the request internally. This
modification operation has failed for the indicated
reason.
Action: Contact your IBM service representative.
Name: pdwpi_m_iis_spnego_set_uri_failed
Explanation: Part of the handling required for
SPNEGO based authentication schemes involves
modifying the request body internally. This
modification operation has failed for the indicated
reason.
Action: Contact your IBM service representative.
Name: pdwpi_m_iis_spnego_finalize_ body_failed
Number: 0x35f020a4 (904929444)
Severity: Error
Component: pic / pd_wpi_s_iis
Number: 0x35f020a1 (904929441)
Severity: Error
AMZIC0166E The IIS server version is %u.%u but
the Tivoli Access Manager Plug-in for
IIS configured for it requires at least IIS
version %u.%u.
Component: pic / pd_wpi_s_iis
AMZIC0162E The request query string could not be
set during SPNEGO processing: error:
%s (error code: %#x).
Explanation: Part of the handling required for
SPNEGO based authentication schemes involves
modifying the query string of the request internally.
This modification operation has failed for the indicated
reason.
Action: Contact your IBM service representative.
Name: pdwpi_m_iis_spnego_set_query_ failed
Number: 0x35f020a2 (904929442)
Severity: Error
Explanation: Tivoli Access Manager Plug-in for Web
Servers provides a plug-in for IIS version 5 and for IIS
version 6. This message indicates that IIS 6 plug-in
(pdwpi-iis6.dll) has been configured into an IIS 5 Web
server.
Action: Unconfigure and re-configure Tivoli Access
Manager Plug-in for Web Servers. If the problem
persists contact your IBM service representative.
Name: pdwpi_m_iis_server_version_too_low
Number: 0x35f020a6 (904929446)
Severity: Error
Component: pic / pd_wpi_s_iis
Component: pic / pd_wpi_s_iis
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
289
AMZIC0167E The IIS server version is %u.%u but
the Tivoli Access Manager Plug-in for
IIS configured for it is not supported for
IIS versions higher than %u.%u.
Explanation: Tivoli Access Manager Plug-in for Web
Servers provides a plug-in for IIS version 5 and for IIS
version 6. This message indicates that IIS 5 plug-in
(pdwpi-iis.dll) has been configured into an IIS 6 Web
server.
Action: Unconfigure and re-configure Tivoli Access
Manager Plug-in for Web Servers. If the problem
persists contact your IBM service representative.
AMZIC0170I A failure occurred while performing an
IIS operation: 0x%x
Explanation: An IIS failure occurred.
Action: Examine the log for further information.
Contact your IBM service representative if the problem
persists.
Name: pdwpi_m_iis_general_failure
Number: 0x35f020aa (904929450)
Severity: Notice
Component: pic / pd_wpi_s
Name: pdwpi_m_iis_server_version_ too_high
Number: 0x35f020a7 (904929447)
Severity: Error
Component: pic / pd_wpi_s_iis
AMZIC0168E The requested object space entry %s
could not be found.
Explanation: The user issued an ’object list’, ’object
listandshow’ or ’object show’ command specifying an
objectspace entry that could not be accessed.
Action: If the entry corresponds to a directory or file,
ensure the entry exists and is accessible by the Access
Manager Plug-in for Web Servers proxy. If the entry
corresponds to a Dynamic URL entry, ensure that the
Dynamic URL module is properly configured. If the
problem persists, contact your IBM service
representative.
Name: pdwpi_m_objectspace_entry_not_ found
AMZIC0192E The configuration file could not be
opened.
Explanation: The specified file could not be opened.
Action: Check that the file exists and has the correct
permissions.
Name: pdwpi_s_stanza_file_open
Number: 0x35f020c0 (904929472)
Severity: Error
Component: pic / pd_wpi_s_configmgr
AMZIC0193E The configuration file %s could not be
opened: error: %s (error code: %#x).
Explanation: The precise reason for the problem is
indicated in the message. This error can also be caused
by incorrect specification of the configuration file name
or insufficient permission to the configuration file.
Severity: Error
Action: Correct the problem and retry the operation. If
the problem persists, contact your IBM service
representative.
Component: pic / pd_wpi_s
Name: pdwpi_m_stanza_open
Number: 0x35f020a8 (904929448)
AMZIC0169I An unsupported data chunk was
located: %s
Explanation: An unsupported data chunk was located
when examining the HTTP request or the HTTP
response. The plug-in can only support data chunks
which are located in memory, or are contained within a
file.
Action: Contact your IBM service representative.
Name: pdwpi_m_unsupported_data_chunk
Number: 0x35f020a9 (904929449)
Severity: Notice
Component: pic / pd_wpi_s
290
Error Message Reference
Number: 0x35f020c1 (904929473)
Severity: Error
Component: pic / pd_wpi_s_configmgr
AMZIC0194E The configuration file is not open.
Explanation: An operation was requested on a file
that has not been opened.
Action: Contact your IBM service representative.
Name: pdwpi_s_stanza_file_closed
Number: 0x35f020c2 (904929474)
Severity: Error
Component: pic / pd_wpi_s_configmgr
AMZIC0195E An internal stanza file processing
routine was unexpectedly called with a
NULL argument.
Explanation: An internal stanza file processing routine
was called with a NULL argument when a non-NULL
argument was expected.
Action: Contact your IBM service representative.
Name: pdwpi_s_stanza_null_argument
Number: 0x35f020c3 (904929475)
Severity: Error
Component: pic / pd_wpi_s_configmgr
AMZIC0196E The configuration file could not be
read.
Explanation: A configuration file read operation
failed.
Action: Examine other error messages for more detail,
correct any problem, and retry the operation.
Name: pdwpi_s_stanza_file_read
Number: 0x35f020c6 (904929478)
Severity: Error
Component: pic / pd_wpi_s_configmgr
AMZIC0199E A configuration entry is invalid. There
is no separator between an entry name
and its value.
Explanation: No name/value separator was found.
Configuration parameter names and values must be
separated by an ’=’ character. Configuration parameter
names may not have white space within them.
Action: Examine earlier messages in the log
containing this message identifying the invalid
configuration entry and correct the entry.
Name: pdwpi_s_stanza_no_separator
Number: 0x35f020c7 (904929479)
Severity: Error
Component: pic / pd_wpi_s_configmgr
AMZIC0200E There is no terminating bracket on the
stanza name: %S.
Number: 0x35f020c4 (904929476)
Severity: Error
Component: pic / pd_wpi_s_configmgr
Explanation: Configuration file stanza names must be
terminated by a close bracket: ’]’.
Action: Correct the invalid configuration file entry.
AMZIC0197E Text in the configuration file could not
be updated.
Explanation: Text in the configuration file could not
be updated.
Action: Examine other error messages to find the
name of the particular configuration file, correct any
problem, and retry the operation.
Name: pdwpi_s_stanza_text_replace
Name: pdwpi_m_stanza_no_term_bracket
Number: 0x35f020c8 (904929480)
Severity: Error
Component: pic / pd_wpi_s_configmgr
AMZIC0201E There is no terminating bracket on a
stanza name.
Explanation: Configuration file stanza names must be
terminated by a close bracket: ’]’.
Number: 0x35f020c5 (904929477)
Severity: Error
Component: pic / pd_wpi_s_configmgr
Action: Examine earlier messages in the log
containing this message to identify the particular
invalid configuration file entry and correct the entry.
AMZIC0198E A configuration entry is invalid. There
is no separator between the entry name
and value on the line ’%S’ in stanza
[%s].
Name: pdwpi_s_stanza_no_term_bracket
Explanation: No separator was found between a
configuration parameter name and its value.
Configuration parameter names and values must be
separated by an equal sign: ’=’. Configuration
parameter names may not have white space within
them.
Component: pic / pd_wpi_s_configmgr
Action: Correct the invalid configuration file entry.
Explanation: The configuration file could not be
locked for the indicated reason.
Name: pdwpi_m_stanza_no_separator
Number: 0x35f020c9 (904929481)
Severity: Error
AMZIC0202E The configuration file could not be
locked: system error: %s (system error
code: %d).
Action: Check for other processes running specified
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
291
with the same configuration file. If the problem
persists, contact your IBM service representative.
Name: pdwpi_m_stanza_file_lock
AMZIC0206E A configuration file operation has not
been performed as it would block when
requested not to.
Severity: Error
Explanation: A configuration file operation has not
been performed as it would block when requested not
to.
Component: pic / pd_wpi_s_configmgr
Action: Contact your IBM service representative.
Number: 0x35f020ca (904929482)
AMZIC0203E Cannot acquire a lock on the stanza
file.
Name: pdwpi_s_stanza_would_block
Number: 0x35f020ce (904929486)
Explanation: The stanza file could not be locked.
Severity: Error
Action: Examine earlier messages in the log
containing this message for more detailed information
about the failure. Review these, correct any problem
and retry the operation. Check for other processes
running with the same configuration file. If the
problem persists, contact your IBM service
representative.
Component: pic / pd_wpi_s_configmgr
Name: pdwpi_s_stanza_file_lock
Action: Correct the permissions on the configuration
file.
Number: 0x35f020cb (904929483)
Severity: Error
Component: pic / pd_wpi_s_configmgr
AMZIC0207E The permissions on the configuration
file prevent it from being opened.
Explanation: A configuration file could not be opened
because of insufficient permission to access the file.
Name: pdwpi_s_stanza_file_perm
Number: 0x35f020cf (904929487)
Severity: Error
AMZIC0204E The configuration file was opened in
read-only mode and cannot be updated.
Component: pic / pd_wpi_s_configmgr
Explanation: An update operation was attempted on a
configuration file that was opened in read-only mode.
AMZIC0208E Memory could not be allocated for
configuration file processing.
Action: Contact your IBM service representative.
Explanation: An error occurred when the process
attempted to allocate memory while processing a
configuration file. There is not enough free memory
available to complete the request.
Name: pdwpi_s_stanza_file_read_only
Number: 0x35f020cc (904929484)
Severity: Error
Component: pic / pd_wpi_s_configmgr
AMZIC0205E An invalid argument was passed to an
internal stanza file processing routine.
Explanation: An internal stanza file routine failed
because of an invalid argument.
Action: Contact your IBM service representative.
Name: pdwpi_s_stanza_invalid_argument
Number: 0x35f020cd (904929485)
Severity: Error
Component: pic / pd_wpi_s_configmgr
Action: Examine the system for processes that are
consuming excessive memory. Then, restart them and
ensure that the system has sufficient physical and
virtual memory for its expected load. If the problem
persists, contact your IBM service representative.
Name: pdwpi_s_stanza_no_memory
Number: 0x35f020d0 (904929488)
Severity: Error
Component: pic / pd_wpi_s_configmgr
AMZIC0210E An expected configuration parameter is
not present in the configuration file.
Explanation: An expected configuration parameter is
not present in the configuration file.
Action: Examine the log for further details of the
error, correct the configuration, and retry the operation.
Name: pdwpi_s_stanza_no_entry
Number: 0x35f020d2 (904929490)
292
Error Message Reference
Severity: Error
Component: pic / pd_wpi_s_configmgr
AMZIC0211E The %s stanza of %s requires
specification of the %s configuration
parameter.
Explanation: An expected configuration item is not
present in the configuration file.
Action: Correct the configuration and retry the
operation.
Name: pdwpi_m_config_item_missing
Number: 0x35f020d3 (904929491)
Severity: Error
Component: pic / pd_wpi_s_configmgr
AMZIC0213E An error occurred when reading
configuration file %s: system error: %s
(system error code: %d).
Explanation: An error occurred while accessing a
configuration item in the configuration file.
Action: Check the syntax of the configuration file.
in the [modules] stanza. This error can be caused by a
misspelling in a module name.
Action: Examine the configuration file for a module
contained within a virtual host stanza, that does not
contain an entry in the modules stanza.
Name: pdwpi_m_missing_module_entry
Number: 0x35f020d7 (904929495)
Severity: Error
Component: pic / pd_wpi_s_configmgr
AMZIC0216E Required session entry values are
missing from the configuration file.
Explanation: A required session configuration
parameter is not specified.
Action: Examine earlier messages in the log
containing this messages for details of the missing
configuration parameter, compare the [sessions] stanza
and the module’s stanza within the configuration file
against the template file for missing entries.
Name: pdwpi_s_missing_session_entry
Number: 0x35f020d8 (904929496)
Severity: Error
Name: pdwpi_m_config_item_error
Component: pic / pd_wpi_s_configmgr
Number: 0x35f020d5 (904929493)
Severity: Error
Component: pic / pd_wpi_s_configmgr
AMZIC0218E An invalid schema was passed to the
configuration manager.
AMZIC0214E A module in the virtual host
configuration is missing a library name.
Explanation: An unregistered schema was passed to
the configuration manager through the loadData
interface.
Explanation: The [modules] stanza specifies mappings
between modules and the shared libraries that
implement them. A module is referenced by a virtual
host that has no corresponding shared library specified
in the [modules] stanza. This error can be caused by a
misspelling in a module name.
Action: Examine the configuration file for a module
contained within a virtual host stanza, that does not
contain an entry in the modules stanza.
Name: pdwpi_s_missing_module_entry
Number: 0x35f020d6 (904929494)
Action: Contact your IBM service representative.
Name: pdwpi_s_invalid_schema
Number: 0x35f020da (904929498)
Severity: Error
Component: pic / pd_wpi_s_configmgr
AMZIC0219E In stanza [%s] of %s, the %s
configuration parameter value ’%s’ is
invalid.
Explanation: The value specified for the indicated
configuration attribute is invalid.
Severity: Error
Component: pic / pd_wpi_s_configmgr
AMZIC0215E A library name could not be found for
the module %s for virtual host %s.
Explanation: The [modules] stanza specifies mappings
between modules and the shared libraries that
implement them. A module is referenced by a virtual
host that has no corresponding shared library specified
Action: Correct the invalid value and restart the
program. Examine earlier messages in the log
containing this message and consult the product
documentation for the valid values for this
configuration parameter.
Name: pdwpi_m_invalid_config_value
Number: 0x35f020db (904929499)
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
293
Severity: Error
Component: pic / pd_wpi_s_configmgr
action is required. Otherwise, correct the configuration
and restart the program.
Name: pdwpi_m_module_missing_config_ value
AMZIC0220E An invalid configuration value has
been specified.
Number: 0x35f020df (904929503)
Severity: Warning
Explanation: The value specified for a configuration
attribute is invalid.
Component: pic / pd_wpi_s_configmgr
Action: Examine the log for details of the invalid
configuration value, correct the invalid value and
restart the program.
AMZIC0224E A value for a required configuration
parameter has not been specified.
Name: pdwpi_s_invalid_config_value
Explanation: An expected configuration item is not
present in the configuration file.
Number: 0x35f020dc (904929500)
Severity: Error
Component: pic / pd_wpi_s_configmgr
AMZIC0221W Missing configuration value for %s in
stanza [%s] in %s: defaulting to ’%s’.
Explanation: A value specified for the indicated
configuration attribute has not been provided so the
specified default value has been assumed.
Action: If the default value is acceptable then no
action is required. Otherwise, correct the configuration
and restart the program.
Name: pdwpi_m_missing_config_value
Number: 0x35f020dd (904929501)
Severity: Warning
Component: pic / pd_wpi_s_configmgr
AMZIC0222E [%s:%s] The %s stanza of %s requires
specification of the %s configuration
parameter.
Explanation: An expected configuration item is not
present in the configuration file.
Action: Correct the configuration and retry the
operation.
Name: pdwpi_m_module_config_item_missing
Number: 0x35f020de (904929502)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0223W [%s:%s] Missing configuration value
for %s in stanza [%s] in %s: defaulting
to ’%s’.
Explanation: A value specified for the indicated
configuration attribute has not been provided so the
specified default value has been assumed.
Action: If the default value is acceptable then no
294
Error Message Reference
Action: Examine the log containing this message for
an earlier message specifying the configuration
parameter that is required and provide a value for this
configuration item.
Name: pdwpi_s_config_item_missing
Number: 0x35f020e0 (904929504)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0225E [%s:%s] The URL ’%s’ specified as the
value for %s in stanza [%s] of
configuration file %s is not a valid URL.
Explanation: The value for the identified configuration
item is expected to be a URL but was not recognized as
one.
Action: Correct the identified configuration parameter
value and retry the operation.
Name: pdwpi_m_module_invalid_url_spec
Number: 0x35f020e1 (904929505)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0226E A value for a configuration parameter
is not valid.
Explanation: An expected configuration item is not
present in the configuration file.
Action: Examine the log containing this message for
an earlier message specifying the configuration
parameter that is specified with a value that is not
valid and provide a valid value for this configuration
item.
Name: pdwpi_s_config_item_invalid
Number: 0x35f020e2 (904929506)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0227E [%s:%s] The %s header corresponding
to attribute %s for user %s could not be
added to the HTTP request: error %s
(error code: %#x).
Explanation: An HTTP header corresponding to the
identified credential attribute could not be added to the
request.
AMZIC0231W An unrecognized configuration entry
was found.
Explanation: Entries were located in the configuration
file that were unused by the system.
Action: Take action indicated by the error message.
Action: Examine earlier messages for detailed
information about the unused entries in the
configuration file. If necessary correct them and restart
the program.
Name: pdwpi_m_tag_value_add_header_ failed
Name: pdwpi_s_unused_config_entry_found
Number: 0x35f020e3 (904929507)
Number: 0x35f020e7 (904929511)
Severity: Error
Severity: Warning
Component: pic / pd_wpi_s_module
Component: pic / pd_wpi_s_configmgr
AMZIC0228E [%s:%s] Authentication was successful
but no session has been created.
AMZIC0256E A reference to an incorrect request
cookie set in the authorization server
has occurred.
Explanation: An internal error has occurred.
Name: pdwpi_m_authenticated_session_ is_null
Explanation: A reference to an incorrect request cookie
set in the Tivoli Access Manager Plug-in for Web
Servers authorization server has occurred.
Number: 0x35f020e4 (904929508)
Action: Contact your IBM service representative.
Severity: Error
Name: pdwpi_s_proxy_bad_request_cookie_ set
Component: pic / pd_wpi_s_module
Number: 0x35f02100 (904929536)
Action: Contact your IBM service representative.
Severity: Error
AMZIC0229E The distributed session module failed
to initialize.
Explanation: A failure occurred during the
initialization of the distributed session module.
Action: Examine the log file for other error conditions
and correct any indicated problems. If the problem
persists, contact your IBM service representative.
Name: pdwpi_s_dsess_initialization_ failure
Number: 0x35f020e5 (904929509)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0230W An unrecognized configuration entry,
%s = %s, was found in the %s stanza of
the %s configuration file.
Explanation: An unknown configuration entry was
found while parsing the configuration file.
Component: pic / pd_wpi_s_proxy
AMZIC0257E The received HTTP request is
incorrectly formed and has been
rejected.
Explanation: The HTTP request received by Access
Manager Web Plug-Ins is badly formed. It does not
conform to HTTP standards and has been rejected on
that basis.
Action: The HTTP request received by Tivoli Access
Manager Plug-in for Web Servers is incorrectly formed.
It does not conform to HTTP standards and has been
rejected on that basis. Ensure that the browser or other
client in use is a supported version. Contact your IBM
service representative if you are confident that the
HTTP request is well formed.
Name: pdwpi_s_bad_request
Number: 0x35f02101 (904929537)
Action: Examine the specified configuration entry to
ensure that it is not incorrectly spelt, or incorrectly
placed in the configuration file.
Severity: Error
Name: pdwpi_m_unused_config_entry_found
AMZIC0258W The received WebDAV %s request has
an empty ’Destination:’ header.
Number: 0x35f020e6 (904929510)
Severity: Warning
Component: pic / pd_wpi_s_configmgr
Component: pic / pd_wpi_s_proxy
Explanation: The WebDAV request received by Tivoli
Access Manager Plug-in for Web Servers requires
specification of a non-empty ’Destination:’ header.
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
295
Although the ’Destination:’ header was present in the
request, its value is empty.
Action: The WebDAV request received by Tivoli
Access Manager Plug-in for Web Servers requires
specification of a non-empty ’Destination:’ header.
Although the ’Destination:’ header was present in the
request, its value is empty. Ensure that the browser or
other client in use is a supported version. Contact your
IBM service representative if you are confident that the
WebDAV request is well formed.
Name: pdwpi_m_webdav_empty_destination
Number: 0x35f02102 (904929538)
Severity: Warning
Component: pic / pd_wpi_s_proxy
AMZIC0259W The received WebDAV %s request has
no ’Destination:’ header.
Explanation: The WebDAV request received by Tivoli
Access Manager Plug-in for Web Servers requires
specification of a ’Destination:’ header value and no
such header was present in the request.
Action: Ensure that the browser or other client in use
is of a supported version. Contact your IBM service
representative if you are confident that the WebDAV
request is well formed.
Name: pdwpi_m_webdav_no_destination
Number: 0x35f02103 (904929539)
Severity: Warning
Component: pic / pd_wpi_s_proxy
AMZIC0260E ’Destination:’ header lookup in
received WebDAV %s request failed:
error: %s (error code: %#x).
Explanation: The WebDAV request received by Tivoli
Access Manager Plug-in for Web Servers requires
specification of a ’Destination:’ header and the attempt
to locate that header failed.
Action: Contact your IBM service representative.
Name: pdwpi_m_webdav_destination_
header_search_failed
Number: 0x35f02104 (904929540)
Severity: Error
Component: pic / pd_wpi_s_proxy
AMZIC0262E The permission set for an
authorization decision is invalid.
Explanation: The permission set for an authorization
decision contains one or more permissions that are
unrecognized by Tivoli Access Manager.
296
Error Message Reference
Action: Ensure that all permissions specified for
authorizing each Web method are defined in the Tivoli
Access Manager policy database.
Name: pdwpi_s_bad_permission_set
Number: 0x35f02106 (904929542)
Severity: Error
Component: pic / pd_wpi_s_proxy
AMZIC0263E The permission set for an
authorization decision on ’%s:%s’ is
invalid: %x.
Explanation: The permission set for an authorization
decision contains permissions that are unrecognized by
Tivoli Access Manager.
Action: Ensure that all permissions specified for
authorizing each Web method are defined in the Tivoli
Access Manager policy database.
Name: pdwpi_m_bad_permission_set
Number: 0x35f02107 (904929543)
Severity: Error
Component: pic / pd_wpi_s_proxy
AMZIC0264E Unable to access information from
permission information attribute list:
API error: %s (API error code:
[%#x:%#x]).
Explanation: An internal processing failure occurred
while handling the result of an authorization decision.
This error might be due to system resource exhaustion
and as such might be transient.
Action: Examine the log containing this message.
Contact your IBM service representative if the problem
persists.
Name: pdwpi_m_perminfo_attrlist_operation_ failed
Number: 0x35f02108 (904929544)
Severity: Error
Component: pic / pd_wpi_s_proxy
AMZIC0265E Unable to access information from
permission information attribute list:
API error code: [%#x:%#x]
Explanation: An internal processing failure occurred
while handling the result of an authorization decision.
This error might be due to system resource exhaustion
and as such might be transient.
Action: Examine the log containing this message.
Contact your IBM service representative if the problem
persists.
Name: pdwpi_m_perminfo_attrlist_operation_
failed_no_string
Number: 0x35f02109 (904929545)
Number: 0x35f0210c (904929548)
Severity: Error
Component: pic / pd_wpi_s_proxy
Severity: Error
Component: pic / pd_wpi_s_proxy
AMZIC0269E Unable to determine authentication
level for %s: API error code: [%#x:%#x]
AMZIC0266E Unable to make authorization decision
for %s trying %s access to %s: API error:
%s (API error code: [%#x:%#x]).
Explanation: An internal processing failure occurred
while determining the required authentication level.
This error might be due to system resource exhaustion
and as such might be transient.
Explanation: An internal processing failure occurred
while making an authorization decision. This error
might be due to system resource exhaustion and as
such might be transient.
Action: Examine the log containing this message.
Contact your IBM service representative if the problem
persists.
Name: pdwpi_m_authorization_decision_ failure
Number: 0x35f0210a (904929546)
Action: Examine the log for other details of the error.
If the problem persists, contact your IBM service
representative.
Name: pdwpi_m_unable_to_determine_
required_authentication_level_no_string
Number: 0x35f0210d (904929549)
Severity: Error
Component: pic / pd_wpi_s_proxy
Severity: Error
Component: pic / pd_wpi_s_proxy
AMZIC0267E Unable to make authorization decision
for %s trying %s access to %s: API error
code: [%#x:%#x]
Explanation: An internal processing failure occurred
while making an authorization decision. This error
might be due to system resource exhaustion and as
such might be transient.
Action: Examine the log containing this message.
Contact your IBM service representative if the problem
persists.
Name: pdwpi_m_authorization_decision_
failure_no_string
AMZIC0270W Ignoring extraneous reauthentication
value %s on %s - using first value
found: %s.
Explanation: The Tivoli Access Manager authorization
API returned multiple reauthentication modes being
required to access the identified resource. Only one
reauthentication mode may be specified.
Action: If the problem persists after checking the
policy, contact your IBM service representative.
Name: pdwpi_m_ignoring_extra_reauth_ values
Number: 0x35f0210e (904929550)
Severity: Warning
Component: pic / pd_wpi_s_proxy
Number: 0x35f0210b (904929547)
Component: pic / pd_wpi_s_proxy
AMZIC0271W Ignoring extraneous reauthentication
value on %s - using first value found:
%s.
AMZIC0268E Unable to determine required
authentication level for %s: API error:
%s (API error code: [%#x:%#x]).
Explanation: The Tivoli Access Manager authorization
API returned multiple reauthentication modes being
required to access the identified resource. Only one
reauthentication mode may be specified.
Severity: Error
Explanation: An internal processing failure occurred
while determining the required authentication level.
This error might be due to system resource exhaustion
and as such might be transient.
Action: Examine the log for other details of the error.
If the problem persists, contact your IBM service
representative.
Name: pdwpi_m_unable_to_determine_
required_authentication_level
Action: If the problem persists after checking the
policy, contact your IBM service representative.
Name: pdwpi_m_ignoring_extra_reauth_
values_no_value
Number: 0x35f0210f (904929551)
Severity: Warning
Component: pic / pd_wpi_s_proxy
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
297
AMZIC0272E The reauthentication mode for %s
could not be determined: API error: %s
(API error code: [%#x:%#x]).
AMZIC0276E The Quality of Protection value for %s
could not be determined: API error
code: [%#x:%#x]
Explanation: An internal processing failure occurred
while determining the required reauthentication mode.
This error might be due to system resource exhaustion
and as such might be transient.
Explanation: An internal processing failure occurred
while determining the required QoP level. This error
might be due to system resource exhaustion and as
such might be transient.
Action: Examine the log for other details of the error.
If the problem persists, contact your IBM service
representative.
Action: Examine the log for other details of the error.
If the problem persists, contact your IBM service
representative.
Name: pdwpi_m_unable_to_determine_
reauthentication_mode
Name: pdwpi_m_unable_to_determine_ qop_no_string
Number: 0x35f02110 (904929552)
Severity: Error
Number: 0x35f02114 (904929556)
Severity: Error
Component: pic / pd_wpi_s_proxy
Component: pic / pd_wpi_s_proxy
AMZIC0274E The reauthentication mode for %s
could not be determined: API error
code: [%#x:%#x]
Explanation: An internal processing failure occurred
while determining the required reauthentication mode.
This error might be due to system resource exhaustion
and as such might be transient.
Action: Examine the log for other details of the error.
If the problem persists, contact your IBM service
representative.
Name: pdwpi_m_unable_to_determine_
reauthentication_mode_no_string
AMZIC0277E A failure occurred upgrading a session
from authentication level %u to level
%u while accessing ’%s:%s’: error: %s
(error code: %#x).
Explanation: An internal processing failure occurred
while upgrading a session from one authentication
level to a higher level. This error might be due to
system resource exhaustion and as such might be
transient.
Action: Examine the log for other details of the error.
If the problem persists, contact your IBM service
representative.
Name: pdwpi_m_session_upgrade_failed
Number: 0x35f02112 (904929554)
Number: 0x35f02115 (904929557)
Severity: Error
Severity: Error
Component: pic / pd_wpi_s_proxy
Component: pic / pd_wpi_s_proxy
AMZIC0275E The Quality of Protection value for %s
could not be determined: API error: %s
(API error code: [%#x:%#x]).
AMZIC0278E A failure occurred performing
post-authorization processing of a
request to ’%s:%s’: error: %s (error code:
%#x).
Explanation: An internal processing failure occurred
while determining the required QoP level. This error
might be due to system resource exhaustion and as
such might be transient.
Action: Examine the log for other details of the error.
If the problem persists, contact your IBM service
representative.
Name: pdwpi_m_unable_to_determine_qop
Number: 0x35f02113 (904929555)
Severity: Error
Component: pic / pd_wpi_s_proxy
Explanation: An internal processing failure occurred
while performing post-authorization processing of the
request. This error might be due to system resource
exhaustion and as such might be transient.
Action: Examine the log for other details of the error.
If the problem persists, contact your IBM service
representative.
Name: pdwpi_m_post_authorization_failed
Number: 0x35f02116 (904929558)
Severity: Error
Component: pic / pd_wpi_s_proxy
298
Error Message Reference
AMZIC0279E Processing failed while handling a
request to ’%s:%s’: error: %s (error code:
%#x).
AMZIC0282E The authorization server could not
handle a request: error: %s (error code:
%#x).
Explanation: An unrecoverable processing failure
occurred while handling a request. This error might be
due to system resource exhaustion and as such might
be transient.
Explanation: An unrecoverable processing failure
occurred while the Tivoli Access Manager Plug-in for
Web Servers authorization server was handling a
request. The problem might be due to system resource
exhaustion and as such might be transient.
Action: Examine the log for other details of the error.
If the problem persists, contact your IBM service
representative.
Name: pdwpi_m_server_error
Action: Examine the log for other details of the error.
If the problem persists, contact your IBM service
representative.
Name: pdwpi_m_unable_to_handle_request
Number: 0x35f02117 (904929559)
Number: 0x35f0211a (904929562)
Severity: Error
Severity: Error
Component: pic / pd_wpi_s_proxy
Component: pic / pd_wpi_s_proxy
AMZIC0280E Processing failed while handling a
request: error: %s (error code: %#x).
Explanation: An unrecoverable processing failure
occurred while handling a request. This error might be
due to system resource exhaustion and as such might
be transient.
Action: Examine the log for other details of the error.
If the problem persists, contact your IBM service
representative.
Name: pdwpi_m_server_error_no_uri
Number: 0x35f02118 (904929560)
AMZIC0283E The authorization server could not
finalize modifications to the HTTP
request and response while processing a
request to ’%s:%s’: error: %s (error code:
%#x).
Explanation: An unrecoverable processing failure
occurred while performing final processing on the
HTTP request and response by the Tivoli Access
Manager Plug-in for Web Servers authorization server.
This error might be due to system resource exhaustion
and as such might be transient.
Action: Examine the log for other details of the error.
If the problem persists, contact your IBM service
representative.
Severity: Error
Component: pic / pd_wpi_s_proxy
Name: pdwpi_m_unable_to_finalize_ transaction
AMZIC0281E The authorization server could not
generate a response to the plug-in while
handling a request to ’%s:%s’: error: %s
(error code: %#x).
Explanation: An unrecoverable processing failure
occurred setting up the response from the Tivoli Access
Manager Plug-in for Web Servers authorization server
to a Web server plug-in. This error might be due to
system resource exhaustion and as such might be
transient.
Action: Examine the log for other details of the error.
If the problem persists, contact your IBM service
representative.
Name: pdwpi_m_severe_error
Number: 0x35f02119 (904929561)
Severity: Error
Component: pic / pd_wpi_s_proxy
Number: 0x35f0211b (904929563)
Severity: Error
Component: pic / pd_wpi_s_proxy
AMZIC0284E None of the configured session
modules for the %s virtual host are able
to cache a session.
Explanation: There is an incorrect configuration which
means that a particular session could not be cached.
Action: Examine the configuration file and ensure that
appropriate session modules have been configured for
the types of Web server accesses being authorized.
Name: pdwpi_m_no_session_cacheing
Number: 0x35f0211c (904929564)
Severity: Error
Component: pic / pd_wpi_s_proxy
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
299
AMZIC0290E The serviceability message
initialization has failed.
Explanation: The Tivoli Access Manager Plug-in for
Web Servers authorization server could not initialize
the serviceability message component.
Action: Ensure that the language pack for Tivoli
Access Access Manager Plug-in for Web Servers is
installed correctly.
Name: pdwpi_s_msg_initialization_failed
Number: 0x35f02122 (904929570)
Severity: Error
Component: pic / pd_wpi_s_proxy
AMZIC0291E Error: %s (error code: %#x).
Explanation: The Tivoli Access Manager Plug-in for
Web Servers authorization server has failed for the
indicated reason.
Action: Examine the log files for further error
messages and take the action indicated for those
messages.
Name: pdwpi_m_error_returned_to_main
Number: 0x35f02126 (904929574)
Severity: Error
Component: pic / pd_wpi_s_proxy
AMZIC0295E The administration service could not
read the configuration information for
branch %s: error: %s (error code: %#x).
Explanation: Initialization of the administration
service failed because the configuration information for
a branch of configured virtual host could not be
determined.
Action: Administration service configuration
parameters must be specified in a stanza named
[<web-server-type>:<branch>] such as
[ihs:/PDWebPI/foo.com]. Check the configuration file
and verify that the configuration parameter values are
specified for the identified branch.
Name: pdwpi_m_admin_svc_unable_to_
configure_branch
Number: 0x35f02127 (904929575)
Severity: Error
Component: pic / pd_wpi_s_proxy
Number: 0x35f02123 (904929571)
Severity: Error
Component: pic / pd_wpi_s_proxy
AMZIC0293E The administration service is unable to
read the value of the %s configuration
parameter for virtual host %s.
Explanation: The administration service attempted to
determine the necessary configuration item for the
specified virtual host but failed while trying to do so.
AMZIC0296E The administration service could not
locate configuration information
required to list child objects of the
protected object %s: error: %s (error
code: %#x).
Explanation: Initialization of the administration
service failed because the configuration information for
a configured virtual host could not be determined.
Action: Ensure that an appropriate value for the
virtual host is set for the configuration parameter
identified.
Action: Administration service configuration
parameters must be specified in a stanza named
[<web-server-type>:<branch>] such as
[ihs:/PDWebPI/foo.com]. Check the configuration file
and verify that the configuration parameter values are
correct.
Name: pdwpi_m_admin_svc_unable_to_
determine_config
Name: pdwpi_m_admin_svc_unable_to_
resolve_config
Number: 0x35f02125 (904929573)
Number: 0x35f02128 (904929576)
Severity: Error
Severity: Error
Component: pic / pd_wpi_s_proxy
Component: pic / pd_wpi_s_proxy
AMZIC0294E No virtual host is specified in the
administration service initialization
parameters.
AMZIC0297W The administration service could not
be initialized for branch %s.
Administration service features will not
be available for this branch.
Explanation: Initialization of the administration
service failed because no virtual host was specified in
the service’s initialization parameters.
Action: Contact your IBM service representative.
Name: pdwpi_m_admin_svc_no_virtual_host
300
Error Message Reference
Explanation: Initialization of the administration
service failed for reasons indicated earlier in the log
containing this message. The administration service
functions will not be available for virtual hosts using
the identified branch.
Action: Administration service configuration
parameters must be specified in a stanza named
[<web-server-type>:<branch>] such as
[ihs:/PDWebPI/foo.com]. Check the configuration file
and verify that the configuration parameter values.
Name: pdwpi_m_admin_svc_not_available
Action: Examine the log for further details of the error
and correct the configuration for the identified virtual
hosts.
Name: pdwpi_m_ambiguous_vh_configuration
Number: 0x35f0212c (904929580)
Severity: Error
Component: pic / pd_wpi_s_proxy
Number: 0x35f02129 (904929577)
Component: pic / pd_wpi_s_proxy
AMZIC0301E The ’id’ and ’protocols’ configuration
values for the defined virtual hosts are
ambiguous.
AMZIC0298E The virtual host %s has an invalid
value for the ’protocols’ configuration
parameter: %s. Valid values are ’http’,
’https’ and ’both’.
Explanation: At least two virtual hosts have been
configured with same ID and overlapping protocols.
This is an ambiguous configuration. Virtual hosts with
the same ID must not match against any of the same
protocols.
Explanation: The identified virtual host has been
configured with an invalid protocol value. Valid values
are ’http’, ’https’ and ’both’.
Action: Examine the log for further details of the error
and correct the configuration for the identified virtual
hosts.
Action: Correct the configuration for the identified
virtual host.
Name: pdwpi_s_ambiguous_vh_configuration
Severity: Warning
Name: pdwpi_m_vh_protocol_value_invalid
Number: 0x35f0212a (904929578)
Number: 0x35f0212d (904929581)
Severity: Error
Component: pic / pd_wpi_s_proxy
Severity: Error
Component: pic / pd_wpi_s_proxy
AMZIC0299E A virtual host has an invalid value for
the ’protocols’ configuration parameter.
Valid values are ’http’, ’https’ and ’both’.
Explanation: A virtual host has been configured with
an invalid protocol value. Valid values are ’http’, ’https’
and ’both’.
Action: Examine the log for further details of the error
and correct the configuration for the identified virtual
host.
Name: pdwpi_s_vh_protocol_value_invalid
AMZIC0302W An HTTP response has been received
by %s that matched no configured
virtual host.
Explanation: A response was received for a virtual
host with the identified server ID; however, this ID did
not match any of the defined protected or unprotected
virtual hosts.
Action: Contact your IBM service representative.
Name: pdwpi_m_unrecognized_rsp_virtual_ host
Number: 0x35f0212e (904929582)
Severity: Warning
Component: pic / pd_wpi_s_proxy
Number: 0x35f0212b (904929579)
Severity: Error
Component: pic / pd_wpi_s_proxy
AMZIC0300E Virtual hosts ’%s’ and ’%s’ with ID
’%s’ have overlapping protocol
configurations ’%s’ and ’%s’. This is an
ambiguous configuration.
Explanation: At least two virtual hosts have been
configured with same ID and overlapping protocols.
This is an ambiguous configuration. Virtual hosts with
the same ID must not match against any of the same
protocols.
AMZIC0303W %d requests for server ID %s and
protocol %s have been received that
matched no configured virtual host. The
latest such request was addressed to
URL ’%s’.
Explanation: A request was received for a virtual host
with the identified server ID and protocol; however,
this ID and protocol combination did not match any of
the defined protected or unprotected virtual hosts. The
request is treated as if it were made to an unprotected
virtual host.
Action: Correct the Tivoli Access Manager Plug-in for
Web Servers in configuration so that all virtual host ID
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
301
and protocol combinations accepted by the Web server
are matched by either a protected virtual host or an
unprotected one.
Name: pdwpi_m_unrecognized_virtual_host
Number: 0x35f0212f (904929583)
Severity: Warning
Component: pic / pd_wpi_s_proxy
AMZIC0308W The module manager could not be
shut down for virtual host %s: error: %s
(error code: %#x).
Explanation: An error occurred during shut down.
Action: No action is required.
Name: pdwpi_m_module_manager_shutdown_ failed
Number: 0x35f02134 (904929588)
Severity: Warning
Component: pic / pd_wpi_s_proxy
Number: 0x35f02136 (904929590)
Severity: Warning
Component: pic / pd_wpi_s_proxy
AMZIC0311E The multi-factor authentication mode
for %s could not be determined: API
error: %s (API error code: [%#x:%#x]).
Explanation: A processing failure occurred trying to
determine the required multi-factor authentication
mode. This error might be due to system resource
exhaustion and as such might be transient.
Action: Examine the log for other details of the error.
If the problem persists, contact your IBM service
representative.
Name: pdwpi_m_unable_to_determine_
multi_factor_auth_mode
Number: 0x35f02137 (904929591)
Severity: Error
Component: pic / pd_wpi_s_proxy
AMZIC0309W The extraneous multi-factor
authentication value: ’%s’ on %s is
being ignored. The first value found
’%s’ will be used.
AMZIC0312E The multi-factor authentication mode
for %s could not be determined: API
error code: [%#x:%#x]
Explanation: More than one multi-factor
authentication modes have been configured for the
identified object in the Tivoli Access Manager policy
database. Only one mode may be specified.
Explanation: A processing failure occurred trying to
determine the required multi-factor authentication
mode. This error might be due to system resource
exhaustion and as such might be transient.
Action: Check the policy and correct it by making
sure only a single multi-factor authentication mode is
specified for the object.
Action: Examine the log for other details of the error.
If the problem persists, contact your IBM service
representative.
Name: pdwpi_m_ignoring_extra_multi_
factor_auth_values
Name: pdwpi_m_unable_to_determine_
multi_factor_auth_mode_no_string
Number: 0x35f02135 (904929589)
Number: 0x35f02138 (904929592)
Severity: Warning
Severity: Error
Component: pic / pd_wpi_s_proxy
Component: pic / pd_wpi_s_proxy
AMZIC0310W An extraneous multi-factor
authentication value on %s is being
ignored. The first value found will be
used: %s.
AMZIC0313W An attempt to upgrade a user’s
session failed due to a difference
between the original user ID: ’%s’, and
the new user ID: ’%s’.
Explanation: More than one multi-factor
authentication modes have been configured for the
identified resource in the Tivoli Access Manager policy
database. Only one mode may be specified.
Explanation: The plug-in has been configured to
require verification of user IDs in step-up operations.
The user stepping up must specify the same user ID at
all authentication levels but in this case has specified a
different ID.
Action: Check the policy and correct it by making
sure only a single multi-factor authentication mode is
specified. If the problem persists after checking the
policy, contact your IBM service representative.
Name: pdwpi_m_ignoring_extra_multi_
factor_auth_values_no_value
302
Error Message Reference
Action: The user must specify the same user ID at
each authentication level.
Name: pdwpi_m_step_up_user_verification_ failed
Number: 0x35f02139 (904929593)
Severity: Warning
Component: pic / pd_wpi_s_proxy
AMZIC0314W An attempt to upgrade a user’s
session failed due to a difference
between the original user ID and the
new user ID.
Explanation: The plug-in has been configured to
require verification of user IDs in step-up operations.
The user stepping up must specify the same user ID at
all authentication levels but in this case has specified a
different ID.
Action: The user must specify the same user ID at
each authentication level.
Name: pdwpi_s_step_up_user_verification_ failed
Number: 0x35f0213a (904929594)
Severity: Error
AMZIC0316E The requested resource was not found.
Explanation: The requested resource is secure and is
being hidden from the client - a Not Found response
will be sent.
Action: No action is required.
Component: pic / pd_wpi_s_proxy
AMZIC0319E Second phase initialization of session
module %s for virtual host %s failed:
error: %s (error code: %#x).
Explanation: Modules are initialized in two phases.
The first phase occurs before the Tivoli Access Manager
Plug-in for Web Servers authorization server connects
to the Access Manager infrastructure, the second occurs
after this. This error indicates that a module that
performs second phase initialization specific to its
session module interface has encountered an error
while doing so.
Name: pdwpi_s_resource_not_found
Number: 0x35f0213c (904929596)
Severity: Error
Component: pic / pd_wpi_s_proxy
AMZIC0317E Second phase initialization of module
%s for virtual host %s failed: error: %s
(error code: %#x).
Explanation: Modules are initialized in two phases.
The first phase occurs before the Tivoli Access Manager
Plug-in for Web Servers authorization server connects
to the Access Manager infrastructure, the second occurs
after this. This error indicates that a module that
performs second phase initialization has encountered
an error while doing so.
Action: Examine the log file for more specific error
messages generated by the module itself, carry out the
recommended actions for that error and restart the
Tivoli Access Manager Plug-in for Web Servers
authorization server.
Name: pdwpi_m_base_initialization_ 2_failed
Component: pic / pd_wpi_s_proxy
Action: Examine the log file for more specific error
messages generated by the module itself, carry out the
recommended actions for that error and restart the
Tivoli Access Manager Plug-in for Web Servers
authorization server.
Number: 0x35f0213e (904929598)
Component: pic / pd_wpi_s_proxy
Severity: Error
Explanation: Modules are initialized in two phases.
The first phase occurs before the Tivoli Access Manager
Plug-in for Web Servers authorization server connects
to the Access Manager infrastructure, the second occurs
after this. This error indicates that a module that
performs second phase initialization specific to its
authentication module interface has encountered an
error while doing so.
Name: pdwpi_m_authn_initialization_ 2_failed
Severity: Warning
Number: 0x35f0213d (904929597)
AMZIC0318E Second phase initialization of
authentication module %s for virtual
host %s failed: error: %s (error code:
%#x).
Action: Examine the log file for more specific error
messages generated by the module itself, carry out the
recommended actions for that error and restart the
Tivoli Access Manager Plug-in for Web Servers
authorization server.
Name: pdwpi_m_session_initialization_ 2_failed
Number: 0x35f0213f (904929599)
Severity: Error
Component: pic / pd_wpi_s_proxy
AMZIC0320E An error occurred during thread
initialization.
Explanation: An unexpected error occurred when a
thread was initializing.
Action: Examine additional messages to determine the
cause of the error and correct the problem. Restart the
process. If the problem persists, contact your IBM
service representative.
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
303
Name: pdwpi_s_thread_init_failure
Number: 0x35f02140 (904929600)
Severity: Error
Component: pic / pd_wpi_s_thread
AMZIC0321E An error occurred during thread
initialization: system error: %s (system
error code: %d).
Explanation: An unexpected error occurred during the
initialization of a thread.
Action: Use the returned error code and error text to
diagnose and correct the problem. If the problem
persists, contact your IBM service representative.
Name: pdwpi_m_thread_init_failure
Number: 0x35f02141 (904929601)
Severity: Error
AMZIC0324E An error occurred while locking a
mutex: system error: %s (system error
code: %d).
Explanation: An unexpected error occurred when
obtaining a mutex lock for serialization.
Action: Use the returned error code and error text to
diagnose and correct the problem. If the problem
persists, contact your IBM service representative.
Name: pdwpi_m_thread_lock_failure
Number: 0x35f02144 (904929604)
Severity: Error
Component: pic / pd_wpi_s_thread
AMZIC0325E An error occurred while unlocking a
mutex: system error: %s (system error
code: %d).
Component: pic / pd_wpi_s_thread
Explanation: An unexpected error occurred when
releasing a mutex lock.
AMZIC0322E An error occurred while locking a
mutex.
Action: Use the returned error code and error text to
diagnose and correct the problem. If the problem
persists, contact your IBM service representative.
Explanation: An unexpected error occur when
obtaining a mutex lock for serialization.
Name: pdwpi_m_thread_unlock_failure
Action: Examine additional messages to determine the
cause of the error and correct the problem. Restart the
process. If the problem persists, contact your IBM
service representative.
Name: pdwpi_s_thread_lock_failure
Number: 0x35f02142 (904929602)
Severity: Error
Number: 0x35f02145 (904929605)
Severity: Error
Component: pic / pd_wpi_s_thread
AMZIC0326E An error occurred while destroying the
mutex: system error: %s (system error
code: %d).
Component: pic / pd_wpi_s_thread
Explanation: An unexpected error occurred when
destroying the mutex.
AMZIC0323E An error occurred while unlocking a
mutex.
Action: Use the returned error code and error text to
diagnose and correct the problem. If the problem
persists, contact your IBM service representative.
Explanation: An unexpected error occur when
releasing a mutex lock.
Name: pdwpi_m_mutex_destroy_failure
Action: Examine additional messages to determine the
cause of the error and correct the problem. Restart the
process. If the problem persists, contact your IBM
service representative.
Name: pdwpi_s_thread_unlock_failure
Number: 0x35f02143 (904929603)
Severity: Error
Component: pic / pd_wpi_s_thread
Number: 0x35f02146 (904929606)
Severity: Error
Component: pic / pd_wpi_s_thread
AMZIC0327E An error occurred while destroying the
mutex.
Explanation: An unexpected error occurred when
destroying the mutex.
Action: Examine the log containing this message for
earlier messages indicating the reason for the failure.
Name: pdwpi_s_mutex_destroy_failure
Number: 0x35f02147 (904929607)
304
Error Message Reference
Severity: Error
AMZIC0386E The authenticated session could not be
stored.
Component: pic / pd_wpi_s_thread
AMZIC0328E An error occurred while waiting on a
condition variable.
Explanation: An unexpected error occurred while
waiting on a condition variable.
Action: Examine the log containing this message for
earlier messages indicating the reason for the failure.
Name: pdwpi_s_thread_condvar_failure
Number: 0x35f02148 (904929608)
Explanation: An authenticated session could not be
stored by any of the configured session modules.
Action: Examine the configuration file and ensure that
appropriate session modules have been configured for
the kinds of Web server accesses being authorized.
Name: pdwpi_s_could_not_store_session
Number: 0x35f02182 (904929666)
Severity: Error
Component: pic / pd_wpi_s_module
Severity: Error
AMZIC0387E An authentication operation failed.
Component: pic / pd_wpi_s_thread
AMZIC0329I The wait on a condition variable timed
out.
Explanation: A timeout occurred while waiting on a
condition variable.
Explanation: An authentication operation failed. The
failure has occurred either because the user has entered
invalid authentication information (such as username
and password) or the underlying authentication system
has failed.
Severity: Notice
Action: Verify that the user has entered valid
authentication information. If they have, verify the
configuration of the authentication modules,
authentication mechanisms, and the availability of the
authentication services. If the problem persists, contact
your IBM service representative.
Component: pic / pd_wpi_s_thread
Name: pdwpi_s_auth_failed
Action: No action is required.
Name: pdwpi_s_thread_condvar_timeout
Number: 0x35f02149 (904929609)
Number: 0x35f02183 (904929667)
AMZIC0384E The requested session was not found.
Severity: Error
Explanation: The requested session was not found.
Component: pic / pd_wpi_s_module
Action: Retry the operation specifying an existing
session.
Name: pdwpi_s_session_not_found
AMZIC0388E The authentication information
provided is invalid.
Explanation: The user provided invalid authentication
information (such as an incorrect password) so the
user’s authentication was denied.
Number: 0x35f02180 (904929664)
Severity: Error
Component: pic / pd_wpi_s_module
Action: The user should retry the operation with valid
authentication information.
AMZIC0385E The module handle is invalid.
Name: pdwpi_s_auth_info_invalid
Explanation: A request has been made through an
invalid module.
Number: 0x35f02184 (904929668)
Action: Examine additional messages to determine the
cause of the error and correct the problem. Restart the
process. If the problem persists, contact your IBM
service representative.
Name: pdwpi_s_invalid_module_handle
Number: 0x35f02181 (904929665)
Severity: Error
Component: pic / pd_wpi_s_module
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0389E The requested authentication
information is already contained within
the request.
Explanation: A request for authentication information
was made when the request already contained the
required information.
Action: Examine additional messages to determine the
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
305
cause of the error and correct the problem. Restart the
process. If the problem persists, contact your IBM
service representative.
post-authorization module’s corresponding
authentication module. This is an internal state tracking
status code only.
Name: pdwpi_s_auth_data_already_present
Severity: Error
Action: Examine additional messages to determine the
cause of the error and correct the problem. Restart the
process. If the problem persists, contact your IBM
service representative.
Component: pic / pd_wpi_s_module
Name: pdwpi_s_authn_required
Number: 0x35f02185 (904929669)
Number: 0x35f02189 (904929673)
AMZIC0390E Authentication is required by a
module but the module does not
provide an authentication interface.
Explanation: A module’s post-authorization interface
determined that the module should perform an
authentication based on the request but the module
does not provide an authentication interface.
Action: Contact your IBM service representative.
Name: pdwpi_s_authn_required_but_
not_auth_module
Number: 0x35f02186 (904929670)
Severity: Error
Component: pic / pd_wpi_s_module
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0396E Could not find the requested symbol.
Explanation: The requested symbol was not found
within the shared library.
Action: Examine additional messages to determine the
cause of the error and correct the problem. Restart the
process. If the problem persists, contact your IBM
service representative.
Name: pdwpi_s_symbol_not_found
Number: 0x35f0218c (904929676)
Severity: Error
AMZIC0391E The account password has expired.
Component: pic / pd_wpi_s_module
Explanation: A user’s account password has expired.
Action: The user’s password must be reset either by
an administrator or by the user.
Name: pdwpi_s_password_expired
Number: 0x35f02187 (904929671)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0392E The account has been locked.
Explanation: A user’s account has been locked.
Action: If the user requires access, an administrator
must unlock the user’s account.
AMZIC0397E Could not load the module library %s:
%s
Explanation: The identified module library could not
be loaded.
Action: Check that the specified library exists, is
found within the configured library path, and is a valid
Tivoli Access Manager Plug-in for Web Servers module
library.
Name: pdwpi_m_module_open_failed
Number: 0x35f0218d (904929677)
Severity: Error
Component: pic / pd_wpi_s_module
Name: pdwpi_s_account_locked
Number: 0x35f02188 (904929672)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0393E Authentication by corresponding
authentication module is now required.
Explanation: A post authorization module has
indicated that a request it is processing contains
authentication proof material that must be tested be
making an authentication attempt using the
306
Error Message Reference
AMZIC0398E Could not load the symbol %s from
the module library %s.
Explanation: The required symbol could not be loaded
from the library.
Action: Check that the library is a valid Tivoli Access
Manager Plug-in for Web Servers module library.
Name: pdwpi_m_symbol_load_failed
Number: 0x35f0218e (904929678)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0399E An attempt has been made to use the
module %s but it is uninitialized.
Explanation: An attempt has been made to use an
uninitialized module.
Action: Contact your IBM service representative.
Name: pdwpi_m_uninitialized_module
Number: 0x35f0218f (904929679)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0403E [%s:%s] The submitted form is missing
a required field: %s.
Explanation: The form did not contain the necessary
fields.
Severity: Error
Action: Check the configured form and ensure that
the correct fields are contained within the form.
Component: pic / pd_wpi_s_module
Name: pdwpi_m_invalid_form_info
Number: 0x35f02193 (904929683)
AMZIC0400E The %s session module configured for
virtual host %s requires specification of
the %s session cache configuration
parameter.
Severity: Error
Component: pic / pd_wpi_s_module
Explanation: Not all of the necessary session cache
data was found in the configuration file for the
identified module for the identified virtual host.
AMZIC0404E Invalid POST data is contained in a
form submission when attempting a
change password operation.
Action: Examine the configuration of the session
module for the virtual host identified for the session
cache configuration information and specify the
missing configuration parameter value. Refer to the
administration guide for the required information.
Explanation: Incorrect password data was entered by
the user.
Name: pdwpi_m_missing_session_data
Name: pdwpi_s_bad_password_data
Number: 0x35f02190 (904929680)
Number: 0x35f02194 (904929684)
Severity: Error
Severity: Error
Component: pic / pd_wpi_s_module
Component: pic / pd_wpi_s_module
AMZIC0401E [%s:%s] The ’Authorization:’ header
present in the request is incorrectly
formed.
AMZIC0405E Authentication is required by the ’%s’
module but the module does not
provide an authentication interface.
Explanation: An invalid ’Authorization:’ header was
received from the browser.
Explanation: The module’s post-authorization
interface determined that the module should perform
an authentication based on the request but the module
does not provide an authentication interface.
Action: Verify that the browser is generating correctly
formed ’Authorization:’ headers.
Name: pdwpi_m_invalid_auth_info
Action: User has entered incorrect password data.
Re-enter the data correctly.
Action: Contact your IBM service representative.
Number: 0x35f02191 (904929681)
Name: pdwpi_m_authn_required_but_
not_auth_module
Severity: Error
Number: 0x35f02195 (904929685)
Component: pic / pd_wpi_s_module
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0402E POST data that is not valid is
contained in a form submission.
Explanation: The form did not contain the necessary
fields.
Action: Check the configured form and ensure that
the correct fields are contained within the form.
Name: pdwpi_s_invalid_form_info
Number: 0x35f02192 (904929682)
AMZIC0406E [%s:%s] The IV Header type ’%s’ is
invalid.
Explanation: An invalid header type has been
specified in the IV-headers module configuration.
Action: Correct the entry in the IV-headers module
configuration. Refer to the administration guide for
information about IV Headers configuration options.
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
307
Name: pdwpi_m_invalid_ivheader_type
Name: pdwpi_m_ltpa_token_encode_failed
Number: 0x35f02196 (904929686)
Number: 0x35f0219a (904929690)
Severity: Error
Severity: Error
Component: pic / pd_wpi_s_module
Component: pic / pd_wpi_s_module
AMZIC0407E An invalid IV Header type has been
specified in the configuration.
AMZIC0411E The LTPA module could not encode a
token.
Explanation: An invalid header type has been
specified in the iv-headers module configuration.
Explanation: An LTPA token could not be created for
the specified user.
Action: Correct the entry in the IV-headers module
configuration. Refer to the administration guide for
information about IV Headers configuration options.
Action: Check the LTPA module configuration to
ensure that the correct key file and password have been
added.
Name: pdwpi_s_invalid_ivheader_type
Name: pdwpi_s_ltpa_token_encode_failed
Number: 0x35f02197 (904929687)
Number: 0x35f0219b (904929691)
Severity: Error
Severity: Error
Component: pic / pd_wpi_s_module
Component: pic / pd_wpi_s_module
AMZIC0408E [%s:%s] The LTPA module could not
read the %s key file: error: %s
AMZIC0412E [%s:%s] The LTPA token ’%s’ could
not be decoded: error: %s (error code:
%#x).
Explanation: The specified LTPA key file could not be
opened with the specified key.
Action: Check the plug-in configuration to ensure that
the correct key file and password have been added.
Name: pdwpi_m_ltpa_read_key_failed
Number: 0x35f02198 (904929688)
Severity: Error
Component: pic / pd_wpi_s_module
Explanation: An LTPA token cookie inserted into the
HTTP request could not be decoded. This cookie was
most likely inserted by a front-end proxy server
handling the request before passing it on to be handled
by the server logging this message.
Action: Ensure that the front-end proxy server and the
server logging this message are configured to use
matching encryption keys for LTPA token encoding and
decoding.
Name: pdwpi_m_ltpa_token_decode_failed
AMZIC0409E The LTPA module could not read the
specified key file.
Explanation: The specified LTPA key file could not be
opened with the specified key.
Action: Check the plug-in configuration to ensure that
the correct key file and password have been added.
Name: pdwpi_s_ltpa_read_key_failed
Number: 0x35f02199 (904929689)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0410E [%s:%s] The LTPA module could not
encode the token for user %s: error: %s
Explanation: An LTPA token could not be created for
the specified user.
Action: Check the LTPA module configuration to
ensure that the correct key file and password have been
specified.
308
Error Message Reference
Number: 0x35f0219c (904929692)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0413E [%s:%s] The supplied LTPA cookie has
expired.
Explanation: An LTPA token cookie inserted into the
HTTP request could not be accepted for authentication
as it has expired. This cookie was most likely inserted
by a front-end proxy server handling the request before
passing it on to be handled by the server logging this
message.
Action: Ensure that the system clocks of the front-end
proxy server and the server logging this message are
synchronized.
Name: pdwpi_m_ltpa_token_expired
Number: 0x35f0219d (904929693)
Severity: Error
Component: pic / pd_wpi_s_module
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0414E The LTPA key file could not be
opened.
Explanation: The LTPA key file could not be opened.
Action: Examine earlier messages in the log
containing this messages to identify the key file that
could not be opened and ensure that the key file exists
and that the file permissions permit access.
AMZIC0418E An internal error occurred within the
LTPA module.
Explanation: An internal error occurred within the
LTPA module.
Action: Contact your IBM service representative.
Name: pdwpi_s_ltpa_internal_error
Name: pdwpi_s_ltpa_keyfile_open
Number: 0x35f021a2 (904929698)
Number: 0x35f0219e (904929694)
Severity: Error
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0415E The version of the LTPA key file is
incorrect.
Explanation: The version of the LTPA key file is
incorrect.
Action: Obtain a new copy of the key file from the
owner of the LTPA encryption key or regenerate a new
key and corresponding key file.
Name: pdwpi_s_ltpa_keyfile_version
Number: 0x35f0219f (904929695)
Component: pic / pd_wpi_s_module
AMZIC0419E An LTPA token could not be encoded.
Explanation: An internal processing failure occurred
while encoding an LTPA token for inclusion in an LTPA
cookie.
Action: Contact your IBM service representative.
Name: pdwpi_s_ltpa_encode_failure
Number: 0x35f021a3 (904929699)
Severity: Error
Component: pic / pd_wpi_s_module
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0416E The LTPA key file could not be parsed
correctly.
Explanation: The LTPA key file could not be parsed
correctly.
AMZIC0420E An LTPA cookie could not be decoded.
Explanation: A failure occurred while decoding an
LTPA token received in an HTTP request.
Action: Ensure that the LTPA encryption key being
used to decrypt the cookie matches the key used to
encrypt the cookie.
Action: Obtain a new copy of the key file from the
owner of the LTPA encryption key or regenerate a new
key and corresponding key file.
Name: pdwpi_s_ltpa_decode_failure
Name: pdwpi_s_ltpa_keyfile_parse
Severity: Error
Number: 0x35f021a0 (904929696)
Component: pic / pd_wpi_s_module
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0417E The LTPA key file password is not
valid for the key file.
Number: 0x35f021a4 (904929700)
AMZIC0421E An expired LTPA cookie has been
presented.
Explanation: An LTPA cookie received in an HTTP
request has expired.
Explanation: The LTPA key file password is not valid
for the key file.
Action: Ensure that the system clocks of the server
providing the LTPA cookie and the server logging this
message are synchronized.
Action: Ensure that the password specified for the
LTPA key file is correct.
Name: pdwpi_s_ltpa_expired
Name: pdwpi_s_ltpa_keyfile_password
Number: 0x35f021a1 (904929697)
Number: 0x35f021a5 (904929701)
Severity: Error
Component: pic / pd_wpi_s_module
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
309
AMZIC0422E An invalid realm name was present
within the LTPA cookie.
Explanation: The realm specified within the LTPA
cookie is invalid. This is an internal error.
Action: Contact your IBM service representative.
Name: pdwpi_s_ltpa_bad_realm
Number: 0x35f021a6 (904929702)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0426E The %s module for %s has
inappropriately changed an
authentication result from ’result: %s
(result code: %#x)’ to ’result: %s, result
code: %#x)’ - original result restored.
Explanation: The identified module changed the result
of an authentication incorrectly and the change has
been ignored.
Action: Contact your IBM service representative.
Name: pdwpi_m_illegal_authentication_ result_change
Number: 0x35f021aa (904929706)
AMZIC0423E A problem occurred while constructing
the ISO padding for the LTPA cookie.
Explanation: This error represents an internal
processing failure.
Action: Contact your IBM service representative.
Name: pdwpi_s_ltpa_iso_pad
Number: 0x35f021a7 (904929703)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0424E A problem occurred while the LTPA
cookie was being converted to the
UTF-8 encoding.
Explanation: An internal error occurred within the
LTPA module.
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0427W The new session created by the %s
pre-authorization module for %s was
not able to be stored: error: %s (error
code: %#x).
Explanation: The identified pre-authorization module
requires the session state to be recorded but no session
state could be recorded.
Action: Check the configuration of session modules. If
the problem persists, contact your IBM service
representative.
Name: pdwpi_m_unable_to_store_session_
from_pre_authzn
Number: 0x35f021ab (904929707)
Action: Contact your IBM service representative.
Severity: Warning
Name: pdwpi_s_ltpa_iconv
Component: pic / pd_wpi_s_module
Number: 0x35f021a8 (904929704)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0425E An unexpected internal LTPA
processing failure occurred: LTPA error:
%d
Explanation: An internal error occurred within the
LTPA module.
Action: Contact your IBM service representative.
Name: pdwpi_m_ltpa_failure
Number: 0x35f021a9 (904929705)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0428W Module definitions in a virtual host
stanza take precedence over a
configured module stanza. The
configured module stanza %s for virtual
host %s has been ignored.
Explanation: Modules for use by a virtual host may
be configured either in-line in the virtual host stanza or
indirectly by referencing a module stanza. Modules
defined in the virtual host stanza take precedence over
a configured module stanza.
Action: Either specify the virtual host’s module
definitions in-line in the virtual host stanza or specify
them in a module stanza, do not do both.
Name: pdwpi_m_module_stanza_ignored
Number: 0x35f021ac (904929708)
Severity: Warning
Component: pic / pd_wpi_s_module
310
Error Message Reference
AMZIC0429E The %s module of the %s virtual host
must also be configured as an
authentication module.
Explanation: The configuration requires that the
specified module be added as an authentication
module.
Action: Modify the configuration to remove the
reference to the specified module or add the specified
module as an authentication module.
Name: pdwpi_m_module_dependency_failed_ authn
Number: 0x35f021ad (904929709)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0430E The %s module of the %s virtual host
must also be configured as a session
module.
which dependency checks have failed. Modify the
configuration to either not reference the module or to
reference all of the interfaces required by the module.
Name: pdwpi_s_module_dependency_failed
Number: 0x35f021b0 (904929712)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0433E The module does not provide the entry
points required to act as an
authentication module.
Explanation: A module has been configured as an
authentication module but it does not provide the entry
points required of an authentication module.
Action: Correct the configuration so that the module
is not specified as an authentication module.
Name: pdwpi_s_module_not_auth_module
Explanation: The configuration requires that the
specified module be added as a session module.
Number: 0x35f021b1 (904929713)
Action: Modify the configuration to remove the
reference to the specified module or add the specified
module as a session module.
Component: pic / pd_wpi_s_module
Name: pdwpi_m_module_dependency_failed_ session
Number: 0x35f021ae (904929710)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0431E The %s module of the %s virtual host
must also be configured as a
post-authorization module.
Explanation: The configuration requires that the
specified module be added as a post-authorization
module.
Action: Modify the configuration to remove the
reference to the specified module or add the specified
module as a post-authorization module.
Name: pdwpi_m_module_dependency_failed_
post_authzn
Number: 0x35f021af (904929711)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0432E The module dependency check failed.
Explanation: One of the configured modules has a
requirement that other interfaces of that module be
enabled.
Action: Examine messages earlier in the log
containing this message for details of the modules for
Severity: Error
AMZIC0434E The %s module (defined as library %s)
is configured as an authentication
module for virtual host %s but does not
provide the entry points required to act
as an authentication module.
Explanation: A module has been configured as an
authentication module but it does not provide the entry
points required of an authentication module.
Action: Correct the configuration so that the module
is not specified as an authentication module.
Name: pdwpi_m_module_not_auth_module
Number: 0x35f021b2 (904929714)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0435E The module does not provide the entry
points required to act as a session
module.
Explanation: A module has been configured as a
session module but it does not provide the entry points
required of a session module.
Action: Correct the configuration so that the module
is not specified as a session module.
Name: pdwpi_s_module_not_session_module
Number: 0x35f021b3 (904929715)
Severity: Error
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
311
Component: pic / pd_wpi_s_module
AMZIC0436E The %s module (defined as library %s)
is configured as a session module for
virtual host %s but does not provide the
entry points required to act as a session
module.
Explanation: A module has been configured as a
session module but it does not provide the entry points
required of a session module.
Action: Correct the configuration so that the module
is not specified as a session module.
Name: pdwpi_m_module_not_session_module
AMZIC0439E The module does not provide the entry
points required to act as a
post-authorization module.
Explanation: A module has been configured as a
post-authorization module but it does not provide the
entry points required of a post-authorization module.
Action: Correct the configuration so that the module
is not specified as a post-authorization module.
Name: pdwpi_s_module_not_post_authzn_ module
Number: 0x35f021b7 (904929719)
Severity: Error
Component: pic / pd_wpi_s_module
Number: 0x35f021b4 (904929716)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0437E The module does not provide the entry
points required to act as a
pre-authorization module.
Explanation: A module has been configured as a
pre-authorization module but it does not provide the
entry points required of a pre-authorization module.
Action: Correct the configuration so that the module
is not specified as a pre-authorization module.
Name: pdwpi_s_module_not_pre_authzn_ module
Number: 0x35f021b5 (904929717)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0438E The %s module (defined as library %s)
is configured as a pre-authorization
module for virtual host %s but does not
provide the entry points required to act
as a pre-authorization module.
Explanation: A module has been configured as a
pre-authorization module but it does not provide the
entry points required of a pre-authorization module.
Action: Correct the configuration so that the module
is not specified as a pre-authorization module.
Name: pdwpi_m_module_not_pre_authzn_ module
AMZIC0440E The %s module (defined as library %s)
is configured as a post-authorization
module for virtual host %s but does not
provide the entry points required to act
as a post-authorization module.
Explanation: A module has been configured as a
post-authorization module but it does not provide the
entry points required of a post-authorization module.
Action: Correct the configuration so that the module
is not specified as a post-authorization module.
Name: pdwpi_m_module_not_post_authzn_ module
Number: 0x35f021b8 (904929720)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0441E The module does not provide the entry
points required to act as a response
module.
Explanation: A module has been configured as a
response module but it does not provide the entry
points required of a response module.
Action: Correct the configuration so that the module
is not specified as a response module.
Name: pdwpi_s_module_not_response_module
Number: 0x35f021b9 (904929721)
Severity: Error
Component: pic / pd_wpi_s_module
Number: 0x35f021b6 (904929718)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0442E The %s module (defined as library %s)
is configured as a response module for
virtual host %s but does not provide the
entry points required to act as a
response module.
Explanation: A module has been configured as a
response module but it does not provide the entry
points required of a response module.
312
Error Message Reference
Action: Correct the configuration so that the module
is not specified as a response module.
Name: pdwpi_m_module_not_response_module
Number: 0x35f021ba (904929722)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0443E The module could not be opened.
Explanation: The module library could not be opened.
Action: Examine earlier messages in the log
containing this message to identify the module that
could not be opened. Check that the identified library
exists and is found within the configured library path.
Name: pdwpi_s_module_open_failed
recorded in the ’AMWebPI-BA-Session-ID:’ header. This
allows intercepted sub-requests generated by the Web
server to be identified as part of the same session. This
error indicates that the ’AMWebPI-BA-Session-ID:’
header could not be added to the request.
Action: The reason included in this message indicates
the cause of the failure. Take the action recommended
for the reason message.
Name: pdwpi_m_cant_preserve_ba_header
Number: 0x35f021bd (904929725)
Severity: Warning
Component: pic / pd_wpi_s_module
AMZIC0446E The account was locked due to too
many failed logins.
Explanation: The account was locked due to too many
failed logins.
Number: 0x35f021bb (904929723)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0444W The session identified by the
’Authorization:’ header could not be
preserved for sub-request processing in
the ’AMWebPI-BA-Session-ID:’ header.
Explanation: When the ’Authorization:’ header is
replaced by values specified by global sign-on (GSO)
data for a session that used the ’Authorization:’ header
to identify the session, the session ID of the session is
recorded in the ’AMWebPI-BA-Session-ID:’ header. This
allows intercepted sub-requests generated by the Web
server to be identified as part of the same session. This
error indicates that the ’AMWebPI-BA-Session-ID:’
header could not be added to the request.
Action: Examine earlier messages in the log
containing this message for more detailed information
as to why the header could not be added and correct
the problem. If the problem persists, contact your IBM
support representative.
Action: Contact your system administrator to have the
account reset.
Name: pdwpi_s_retry_limit_reached
Number: 0x35f021be (904929726)
Severity: Error
Component: pic / pd_wpi_s_module
AMZIC0447W Failed to lock the located session.
Explanation: A session was located in the session
cache, but the session could not be locked. This error is
caused if another thread is blocking for a long period
of time while maintaining the session lock. This might
be caused by other systems with which the Tivoli
Access Manager Plug-in for Web Servers interacts.
Name: pdwpi_s_cant_preserve_ba_session
Action: Ensure that other systems with which the
Tivoli Access Manager Plug-in for Web Servers is
integrated are available and functioning well. In
particular, investigate the Tivoli Access Manager Policy
Server and the user registry. If the problem persists,
contact your IBM service representative.
Number: 0x35f021bc (904929724)
Name: pdwpi_m_session_lock_failed
Severity: Warning
Number: 0x35f021bf (904929727)
Component: pic / pd_wpi_s_module
Severity: Warning
Component: pic / pd_wpi_s_module
AMZIC0445W [%s:%s] The session identified by the
’Authorization:’ header could not be
preserved for sub-request processing in
the ’AMWebPI-BA-Session-ID:’ header:
error: %s (error code: %#x).
Explanation: When the ’Authorization:’ header is
replaced by values specified by global sign-on (GSO)
data for a session that used the ’Authorization:’ header
to identify the session, the session ID of the session is
AMZIC0448E A system API returned an error.
Explanation: One of the system APIs returned an
error.
Action: Examine earlier messages in the log
containing this message for more detailed information
on the error condition. If the problem persists, contact
your IBM service representative.
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
313
Name: pdwpi_s_system_api_error
Number: 0x35f021c0 (904929728)
Severity: Error
Component: pic / pd_wpi_s_processmgr
AMZIC0451E The process cannot change its user
identity to the configured user because
the user is not known to the operating
system.
Explanation: The process logging this message is
configured to run with a user identity not known to the
operating system.
Action: Correct or create the configured user to be one
known to the operating system for the process that has
logged this error message.
Name: pdwpi_s_unknown_user
Number: 0x35f021c3 (904929731)
Severity: Error
Component: pic / pd_wpi_s_processmgr
AMZIC0452E The process cannot change its group
identity to the configured group as the
group is not known to the operating
system.
Explanation: The process logging this message is
configured to run with a group identity not known to
the operating system.
Action: Correct the configured group to be one known
to the operating system for the process that has logged
this error message.
Name: pdwpi_s_unknown_group
Number: 0x35f021c4 (904929732)
Severity: Error
AMZIC0454E A signal was received from an
unknown child process: %d
Explanation: This message is generated when a signal
is received from a process not recognized as a child of
the process manager.
Action: Contact your IBM service representative.
Name: pdwpi_m_unknown_child
Number: 0x35f021c6 (904929734)
Severity: Error
Component: pic / pd_wpi_s_processmgr
AMZIC0455E %s> terminated abnormally.
Explanation: This message is generated when a child
process of the process manager has terminated
abnormally.
Action: Examine the log for the identified program to
determine the reason why it has terminated
abnormally.
Name: pdwpi_m_process_terminated
Number: 0x35f021c7 (904929735)
Severity: Error
Component: pic / pd_wpi_s_processmgr
AMZIC0456I %s> terminated cleanly.
Explanation: This message is generated when a child
process has terminated normally.
Action: No action is required.
Name: pdwpi_m_process_terminated_cleanly
Number: 0x35f021c8 (904929736)
Severity: Notice
Component: pic / pd_wpi_s_processmgr
Component: pic / pd_wpi_s_processmgr
AMZIC0457I %s started.
AMZIC0453I %s shutting down.
Explanation: This message is generated when a
process is being shut down.
Action: No action is required.
Name: pdwpi_m_process_terminating
Number: 0x35f021c5 (904929733)
Severity: Notice
Component: pic / pd_wpi_s_processmgr
314
Error Message Reference
Explanation: This message is generated when a child
process is started successfully.
Action: No action is required.
Name: pdwpi_m_process_started
Number: 0x35f021c9 (904929737)
Severity: Notice
Component: pic / pd_wpi_s_processmgr
AMZIC0458E %s could not be started: error: %s
(error code: %#x).
AMZIC0462E Could not monitor the child processes:
error: %s (error code: %#x).
Explanation: This message is generated when a child
process has terminated abnormally.
Explanation: The manager process could not start
monitoring the authorization server process for the
reason indicated.
Action: Examine the log for the identified program,
correct any problem and restart the process manager.
Number: 0x35f021ca (904929738)
Action: Examine earlier messages in the log
containing this message for information describing the
precise nature of the failure. If the problem persists,
contact your IBM service representative.
Severity: Error
Name: pdwpi_m_monitor_failed
Component: pic / pd_wpi_s_processmgr
Number: 0x35f021ce (904929742)
Name: pdwpi_m_could_not_start_child
Severity: Error
AMZIC0459E Could not run as the requested
user/group: error: %s (error code: %#x).
Explanation: This message is generated when the
authorization server manager is told to run as an
invalid user or group.
Action: Change the user/group in the configuration
file.
Name: pdwpi_m_invalid_user
Number: 0x35f021cb (904929739)
Severity: Error
Component: pic / pd_wpi_s_processmgr
Component: pic / pd_wpi_s_processmgr
AMZIC0463E Unable to start the child process.
Explanation: A sub-process could not be started.
Action: Examine earlier messages in the log
containing this message for more detailed information
and verify that Tivoli Access Manager Plug-in for Web
Servers is installed and configured correctly. If the
problem persists, contact your IBM service
representative.
Name: pdwpi_s_create_process_failed
Number: 0x35f021cf (904929743)
AMZIC0460E Could not daemonize: error: %s (error
code: %#x).
Explanation: The manager process could not become a
daemon.
Action: Examine the system for any resources that
may be exhausted, such as virtual memory or disk
space, correct them and restart the process manager.
Name: pdwpi_m_could_not_daemonize
Number: 0x35f021cc (904929740)
Severity: Error
Component: pic / pd_wpi_s_processmgr
AMZIC0461E Could not start the program %s: error:
%s (error code: %#x).
Severity: Error
Component: pic / pd_wpi_s_processmgr
AMZIC0464E Unable to start the %s child process:
system error: %s (system error code:
%d).
Explanation: The identified sub-process could not be
started for the indicated reason.
Action: Examine earlier messages in the log
containing this message for more detailed information
and verify that Tivoli Access Manager Plug-in for Web
Servers is installed and configured correctly. If the
problem persists, contact your IBM service
representative.
Name: pdwpi_m_create_process_failed
Explanation: The process manager could not start the
identified program for the reason indicated.
Number: 0x35f021d0 (904929744)
Action: Check the process manager configuration file
for the correct configuration for the identified program.
Component: pic / pd_wpi_s_processmgr
Name: pdwpi_m_could_not_start_child_ process
AMZIC0465E Unable to start %s service: system
error: %s (system error code: %d).
Number: 0x35f021cd (904929741)
Severity: Error
Component: pic / pd_wpi_s_processmgr
Severity: Error
Explanation: The service could not be started due to a
system error.
Action: Take any action indicated by the reported
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
315
system error. Ensure that Tivoli Access Manager Plug-in
for Web Servers is installed and configured correctly. If
the problem persists, contact your IBM service
representative.
Name: pdwpi_m_service_start_failed
Number: 0x35f021d1 (904929745)
Severity: Error
Component: pic / pd_wpi_s_processmgr
AMZIC0469E Unable to retrieve group information
for group %s.
Explanation: The group identified does not have an
entry in the system user registry.
Action: Verify that Tivoli Access Manager Plug-in for
Web Servers is installed and configured correctly. If the
problem persists, contact your IBM service
representative.
Name: pdwpi_m_unable_to_retrieve_ group_info
AMZIC0466E Unable to register %s service with
system: system error: %s (system error
code: %d).
Explanation: The service could not be registered due
to a system error.
Action: Contact your IBM service representative.
Name: pdwpi_m_service_register_failed
Number: 0x35f021d2 (904929746)
Severity: Error
Component: pic / pd_wpi_s_processmgr
AMZIC0467E Unable to set %s service as running:
system error: %s (system error code:
%d).
Explanation: The service could not be set as running
due to a system error.
Action: Contact your IBM service representative.
Number: 0x35f021d5 (904929749)
Severity: Error
Component: pic / pd_wpi_s_processmgr
AMZIC0470E Unable to change group ID to %d:
system error: %s (system error code:
%d).
Explanation: The process was unable to change its
group ID to the desired value.
Action: Verify that Tivoli Access Manager Plug-in for
Web Servers is installed and configured correctly. If the
problem persists, contact your IBM service
representative.
Name: pdwpi_m_setgid_failed
Number: 0x35f021d6 (904929750)
Severity: Error
Component: pic / pd_wpi_s_processmgr
Name: pdwpi_m_service_set_status_ running_failed
Number: 0x35f021d3 (904929747)
Severity: Error
AMZIC0471E Unable to change user ID to %d:
system error: %s (system error code:
%d).
Component: pic / pd_wpi_s_processmgr
Explanation: The process was unable to change its
user ID to the desired value.
AMZIC0468E Unable to retrieve user information for
user %s.
Action: Verify that Tivoli Access Manager Plug-in for
Web Servers is installed and configured correctly. If the
problem persists, contact your IBM service
representative.
Explanation: The user identified does not have an
entry in the system user registry.
Action: Verify that Tivoli Access Manager Plug-in for
Web Servers is installed and configured correctly. If the
problem persists, contact your IBM service
representative.
Name: pdwpi_m_unable_to_retrieve_ user_info
Number: 0x35f021d4 (904929748)
Severity: Error
Component: pic / pd_wpi_s_processmgr
Name: pdwpi_m_setuid_failed
Number: 0x35f021d7 (904929751)
Severity: Error
Component: pic / pd_wpi_s_processmgr
AMZIC0472W The %s process is restarting too
rapidly. The process manager is now
waiting for %d seconds before
attempting start it again.
Explanation: This message is generated when the
process is continually failing to start within a short
period of time.
316
Error Message Reference
Action: Examine the log for the identified program to
determine why it is not starting. Try starting the
program manually to see if it starts correctly.
AMZIC0476W The child process did not start within
one minute.
Explanation: This error status indicates that a child
process of the pdwebpimgrd program took more time
than allowed by the startup-timeout configuration
parameter of pdwebpimgrd.
Name: pdwpi_m_process_spin
Number: 0x35f021d8 (904929752)
Severity: Warning
Component: pic / pd_wpi_s_processmgr
AMZIC0473W Child process did not start: error: %s
(error code: %#x).
Action: Examine the error log for the identified
program and correct any problem. If the identified
program is really taking longer than the
startup-timeout configuration parameter allows then
increase the value of this parameter.
Explanation: This message is generated when the
child process of the pdwebpimgrd fails to start.
Name: pdwpi_s_child_startup_timed_out
Action: Examine the error logs and correct any
problem. If the problem persists, contact your IBM
service representative.
Severity: Warning
Number: 0x35f021dc (904929756)
Component: pic / pd_wpi_s_processmgr
Name: pdwpi_m_child_did_not_start
AMZIC0477E The process manager could not fork:
system error: %s (system error code:
%d).
Number: 0x35f021d9 (904929753)
Severity: Warning
Component: pic / pd_wpi_s_processmgr
AMZIC0474W Child process did not start.
Explanation: This message is generated when the
child process of the pdwebpimgrd fails to start.
Explanation: The process manager could not fork a
new child process required to start a new child. The
fork operation failed for the reason indicated. This may
occur when the system is heavily loaded and running
too many processes.
Action: Examine the error logs and correct any
problem. If the problem persists, contact your IBM
service representative.
Action: Examine the processes already running on the
system and ensure that the system is not overloaded.
Additional physical or virtual memory resources might
be required to handle the system load.
Name: pdwpi_s_child_did_not_start
Name: pdwpi_m_fork_failed
Number: 0x35f021da (904929754)
Number: 0x35f021dd (904929757)
Severity: Warning
Severity: Error
Component: pic / pd_wpi_s_processmgr
Component: pic / pd_wpi_s_processmgr
AMZIC0475W The %s program did not completely
start after %d seconds.
AMZIC0478E The standard output stream could not
be redirected to the file %s: system
error: %s (system error code: %d).
Explanation: This message is generated when a child
process of the pdwebpimgrd program took more time
than allowed by the startup-timeout configuration
parameter of pdwebpimgrd.
Action: Examine the error log for the identified
program and correct any problem. If the identified
program is really taking longer than the
startup-timeout configuration parameter allows then
increase the value of this parameter.
Name: pdwpi_m_child_startup_timed_out
Number: 0x35f021db (904929755)
Explanation: In order to ensure that output messages
generated by the process are captured in a log file the
standard output stream is being redirected to the
process’s log file. This redirection failed for the
indicated reason.
Action: Ensure that the disk on which log file resides
is not full, that the directory that should contain the log
file exists, and that the process has permission to create
the log file in that directory.
Name: pdwpi_m_stdout_redirection_failed
Number: 0x35f021de (904929758)
Severity: Warning
Component: pic / pd_wpi_s_processmgr
Severity: Error
Component: pic / pd_wpi_s_processmgr
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
317
AMZIC0479E The standard error stream could not be
redirected to the file %s: system error:
%s (system error code: %d).
Explanation: In order to ensure that error messages
generated by the process are captured in a log file the
standard output stream is being redirected to the
process’s log file. This redirection failed for the
indicated reason.
Action: Ensure that the disk on which log file resides
is not full, that the directory that should contain the log
file exists, and that the process has permission to create
the log file in that directory.
Name: pdwpi_m_manager_is_initializing
Number: 0x35f021e2 (904929762)
Severity: Notice
Component: pic / pd_wpi_s_processmgr
AMZIC0483I The process manager is ready.
Explanation: This message is generated when the
Tivoli Access Manager Plug-in for Web Servers process
manager is ready to monitor the authorization server.
Action: No action is required.
Name: pdwpi_m_stderr_redirection_failed
Name: pdwpi_m_manager_is_ready
Number: 0x35f021df (904929759)
Number: 0x35f021e3 (904929763)
Severity: Error
Severity: Notice
Component: pic / pd_wpi_s_processmgr
Component: pic / pd_wpi_s_processmgr
AMZIC0480E Unable to retrieve user information for
user ID %u.
AMZIC0484I The process manager has stopped.
Explanation: The user ID identified does not have an
entry in the system user registry.
Explanation: This message is generated when the
Tivoli Access Manager Plug-in for Web Servers process
manager is stopped by the administrator.
Action: Verify that Tivoli Access Manager Plug-in for
Web Servers is installed and configured correctly. If the
problem persists, contact your IBM service
representative.
Action: No action is required.
Name: pdwpi_m_unable_to_retrieve_ uid_info
Severity: Notice
Number: 0x35f021e0 (904929760)
Component: pic / pd_wpi_s_processmgr
Severity: Error
Component: pic / pd_wpi_s_processmgr
AMZIC0481E Unable to retrieve group information
for group ID %u.
Explanation: The group identified does not have an
entry in the system user registry.
Action: Verify that Tivoli Access Manager Plug-in for
Web Servers is installed and configured correctly. If the
problem persists, contact your IBM service
representative.
Name: pdwpi_m_manager_has_stopped
Number: 0x35f021e4 (904929764)
AMZIC0485I The process manager is starting %s.
Explanation: This message is generated when the
Tivoli Access Manager Plug-in for Web Servers process
manager is starting the identified program.
Action: No action is required.
Name: pdwpi_m_manager_child_is_starting
Number: 0x35f021e5 (904929765)
Severity: Notice
Component: pic / pd_wpi_s_processmgr
Name: pdwpi_m_unable_to_retrieve_ gid_info
Number: 0x35f021e1 (904929761)
Severity: Error
Component: pic / pd_wpi_s_processmgr
AMZIC0482I Initializing the process manager.
Explanation: This message is generated when the
Tivoli Access Manager Plug-in for Web Servers process
manager is being initialized.
Action: No action is required.
318
Error Message Reference
AMZIC0486I The process manager is re-starting %s.
Explanation: This message is generated when the
Tivoli Access Manager Plug-in for Web Servers process
manager is re-starting the identified program after it
has failed.
Action: Examine the child programs log file for
reasons why it has failed and take any action indicated
for those messages.
Name: pdwpi_m_manager_child_is_restarting_
Number: 0x35f021e6 (904929766)
Severity: Notice
Component: pic / pd_wpi_s_processmgr
AMZIC0512E The authorization server interface has
not been initialized.
Explanation: An internal processing error occurred in
the IPC sub-system.
Action: Contact your IBM service representative.
Name: pdwpi_s_proxy_not_initialized
AMZIC0515E An invalid parameter was passed to an
internal function.
Explanation: An internal processing error occurred in
the IPC sub-system.
Action: Contact your IBM service representative.
Name: pdwpi_s_proxy_bad_param
Number: 0x35f02203 (904929795)
Severity: Error
Component: pic / pd_wpi_s_proxy_if
Number: 0x35f02200 (904929792)
Severity: Error
Component: pic / pd_wpi_s_proxy_if
AMZIC0516E The authorization server interface has
already been initialized.
AMZIC0513E There is no factory for the request.
Explanation: An internal processing error occurred in
the IPC sub-system.
Explanation: A ’factory’ is used to build an internal
representation of an IPC message. Each new IPC
message type requires a new factory. This message
indicates that the authorization server does not have a
factory for an IPC message received from the Web
server plug-in. This can only happen if the Web server
plug-in and the authorization server are not from the
same version of Tivoli Access Manager Plug-in for Web
Servers.
Action: Verify that Tivoli Access Manager Plug-in for
Web Servers is installed and configured correctly. In
particular verify that the Web server and authorization
server have been restarted after any upgrade or fix
pack installation. To determine version information on
these components run the command ’pdwpi-version -l’
and look for mismatches. Installations with fixpacks
applied may have components with differing
maintenance levels as indicated by the last element of
the version number.
Action: Contact your IBM service representative.
Name: pdwpi_s_proxy_already_initialized
Number: 0x35f02204 (904929796)
Severity: Error
Component: pic / pd_wpi_s_proxy_if
AMZIC0517E An error occurred while unmarshalling
a plug-in message.
Explanation: An internal processing error occurred in
the IPC sub-system.
Action: Contact your IBM service representative.
Name: pdwpi_s_proxy_unmarshal_err
Number: 0x35f02205 (904929797)
Severity: Error
Component: pic / pd_wpi_s_proxy_if
Name: pdwpi_s_proxy_no_factory
Number: 0x35f02201 (904929793)
AMZIC0518E No handler has been registered for the
requested message.
Severity: Error
Component: pic / pd_wpi_s_proxy_if
Explanation: An internal processing error occurred in
the IPC sub-system.
AMZIC0514E An invalid worker buffer was
specified.
Action: Contact your IBM service representative.
Explanation: An internal processing error occurred in
the IPC sub-system.
Number: 0x35f02206 (904929798)
Name: pdwpi_s_proxy_no_handler
Action: Contact your IBM service representative.
Severity: Error
Name: pdwpi_s_proxy_invalid_wkrbuf
Component: pic / pd_wpi_s_proxy_if
Number: 0x35f02202 (904929794)
AMZIC0519E There are no more memory segments
within the iterator.
Severity: Error
Component: pic / pd_wpi_s_proxy_if
Explanation: An internal processing error occurred in
the IPC sub-system.
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
319
Action: Contact your IBM service representative.
Name: pdwpi_s_proxy_no_more_elements
Number: 0x35f02207 (904929799)
Severity: Error
Component: pic / pd_wpi_s_proxy_if
AMZIC0524E No IPC memory could be allocated for
the specified key.
Explanation: An internal processing error occurred in
the IPC sub-system.
Action: Contact your IBM service representative.
Name: pdwpi_s_ipc_nomem
AMZIC0520E Failed to create the IPC key.
Number: 0x35f0220c (904929804)
Explanation: An internal processing error occurred in
the IPC sub-system.
Severity: Error
Component: pic / pd_wpi_s_proxy_if
Action: Contact your IBM service representative.
Name: pdwpi_s_ipc_key_create
AMZIC0525E An IPC system limit has been reached.
Number: 0x35f02208 (904929800)
Explanation: An internal processing error occurred in
the IPC sub-system.
Severity: Error
Component: pic / pd_wpi_s_proxy_if
Action: Contact your IBM service representative.
Name: pdwpi_s_ipc_syslimit
AMZIC0521E The IPC key already exists.
Number: 0x35f0220d (904929805)
Explanation: An internal processing error occurred in
the IPC sub-system.
Severity: Error
Component: pic / pd_wpi_s_proxy_if
Action: Contact your IBM service representative.
Name: pdwpi_s_ipc_exist
Number: 0x35f02209 (904929801)
Severity: Error
Component: pic / pd_wpi_s_proxy_if
AMZIC0526E The IPC call would not complete
immediately.
Explanation: An IPC call would take time rather than
completing immediately. The presence of this message
in the log indicates that an internal processing error
occurred in the IPC sub-system.
AMZIC0522E The IPC key has been removed.
Action: Contact your IBM service representative.
Explanation: An internal processing error occurred in
the IPC sub-system.
Name: pdwpi_s_ipc_wouldblock
Action: Contact your IBM service representative.
Severity: Error
Name: pdwpi_s_ipc_removed
Component: pic / pd_wpi_s_proxy_if
Number: 0x35f0220e (904929806)
Number: 0x35f0220a (904929802)
Severity: Error
Component: pic / pd_wpi_s_proxy_if
AMZIC0523E No IPC segment exists for the
specified key.
AMZIC0527E The IPC operation was interrupted by
a signal from the system.
Explanation: An internal processing error occurred in
the IPC sub-system.
Action: Contact your IBM service representative.
Explanation: An internal processing error occurred in
the IPC sub-system.
Name: pdwpi_s_ipc_intr
Action: Contact your IBM service representative.
Severity: Error
Name: pdwpi_s_ipc_noent
Component: pic / pd_wpi_s_proxy_if
Number: 0x35f0220b (904929803)
Severity: Error
Component: pic / pd_wpi_s_proxy_if
320
Error Message Reference
Number: 0x35f0220f (904929807)
AMZIC0528E The specified IPC ID is not valid.
Explanation: An internal processing error occurred in
the IPC sub-system.
Action: Contact your IBM service representative.
Name: pdwpi_s_ipc_id_invalid
Severity: Error
Component: pic / pd_wpi_s_proxy_if
AMZIC0534E A semaphore was posted to too many
times.
Number: 0x35f02210 (904929808)
Explanation: An internal processing error occurred in
the IPC sub-system.
Severity: Error
Action: Contact your IBM service representative.
Component: pic / pd_wpi_s_proxy_if
Name: pdwpi_s_ipc_too_many_posts
Number: 0x35f02216 (904929814)
AMZIC0529E An internal IPC error has occurred.
Explanation: An internal processing error occurred in
the IPC sub-system.
Action: Contact your IBM service representative.
Name: pdwpi_s_ipc_internal
Number: 0x35f02211 (904929809)
Severity: Error
Component: pic / pd_wpi_s_proxy_if
AMZIC0530E An IPC timeout has occurred.
Explanation: An internal processing error occurred in
the IPC sub-system.
Action: Contact your IBM service representative.
Name: pdwpi_s_ipc_timeout
Severity: Error
Component: pic / pd_wpi_s_proxy_if
AMZIC0535E Access is denied to IPC resources.
Explanation: The authorization server has been
restarted and does not have access to the shared
memory region used to communicate with the Web
server plug-in. This can happen when changing the
system user or group that the authorization server runs
as and restarting the authorization server without first
shutting down the Web server. This can also happen
when restarting the authorization server from the
command line using the ’-foreground’ command line
option without restarting the Web server.
Action: Shut down the Web server, restart the
authorization server, and then restart the Web server.
Name: pdwpi_s_ipc_no_access
Number: 0x35f02212 (904929810)
Number: 0x35f02217 (904929815)
Severity: Error
Component: pic / pd_wpi_s_proxy_if
Severity: Error
Component: pic / pd_wpi_s_proxy_if
AMZIC0531E The IPC operation was abandoned.
Explanation: An internal processing error occurred in
the IPC sub-system.
Action: Contact your IBM service representative.
Name: pdwpi_s_ipc_abandoned
Number: 0x35f02213 (904929811)
Severity: Error
Component: pic / pd_wpi_s_proxy_if
AMZIC0532E An incompatible IPC object already
exists.
Explanation: An internal processing error occurred in
the IPC sub-system.
Action: Contact your IBM service representative.
Name: pdwpi_s_ipc_exist_incompatible
Number: 0x35f02214 (904929812)
AMZIC0536E You must shutdown both the
authorization server and the Web server
before restarting the authorization
server after reconfiguring the number of
worker threads.
Explanation: Reconfiguration of the number of worker
threads has been detected on restart of the
authorization server. The number of worker threads
controls the amount of IPC resources used in
communication between the Web server and the
authorization server. Since this configuration parameter
applies to both the Web server and the authorization
server, changing the parameter requires the restart of
both servers.
Action: Shut down the Web server and the
authorization server and then restart both.
Name: pdwpi_s_ipc_reconfig_full_restart_ required
Number: 0x35f02218 (904929816)
Severity: Error
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
321
Component: pic / pd_wpi_s_proxy_if
persists, contact your IBM service representative.
Name: pdwpi_m_error_limit_reached_ recovery_failed
AMZIC0537E Unable to detach the worker pool from
the pool manager shared memory: error:
%s (error code: %#x).
Number: 0x35f0221c (904929820)
Severity: Error
Explanation: The worker pool was unable to detach
from the pool manager shared memory segment.
Component: pic / pd_wpi_s_proxy_if
Action: Contact your IBM service representative.
AMZIC0541E IPC error limit reached. Recovery
failed.
Name: pdwpi_m_unable_to_detach_from_
pool_mgr_shm
Number: 0x35f02219 (904929817)
Severity: Error
Component: pic / pd_wpi_s_proxy_if
AMZIC0538E Unable to detach the worker pool from
the worker shared memory: error: %s
(error code: %#x).
Explanation: The worker pool was unable to detach
from the worker shared memory segment.
Explanation: A worker thread has encountered a large
number of errors while attempting to service IPC
requests and the attempt to recover has failed.
Action: Restart the Tivoli Access Manager Plug-in for
Web Servers authorization server. If the problem
persists, contact your IBM service representative.
Name: pdwpi_s_error_limit_reached_ recovery_failed
Number: 0x35f0221d (904929821)
Severity: Error
Component: pic / pd_wpi_s_proxy_if
Action: Contact your IBM service representative.
Name: pdwpi_m_unable_to_detach_from_
worker_shm
Number: 0x35f0221a (904929818)
Severity: Error
Component: pic / pd_wpi_s_proxy_if
AMZIC0539E Error limit reached on worker thread
%d. Attempting recovery.
Explanation: A worker thread has encountered a large
number of errors while attempting to service IPC
requests and has been placed in a recovery mode.
Action: If the recovery is not successful, restart the
authorization server. The success of the recovery will be
indicated later in the log. If the problem persists,
contact your IBM service representative.
Name: pdwpi_m_error_limit_reached_
attempting_recovery
Number: 0x35f0221b (904929819)
Severity: Error
Component: pic / pd_wpi_s_proxy_if
AMZIC0542W Error limit reached on worker thread
%d. Recovery succeeded.
Explanation: A worker thread has encountered a large
number of errors while attempting to service IPC
requests and the attempt to recover has succeeded.
Action: Examine earlier messages in the log
containing this message to determine the errors
encountered by the worker thread. If the problems
persists, contact your IBM service representative.
Name: pdwpi_m_error_limit_reached_
recovery_succeeded
Number: 0x35f0221e (904929822)
Severity: Warning
Component: pic / pd_wpi_s_proxy_if
AMZIC0543W The worker thread has been reset.
Explanation: A worker thread has taken longer than
the maximum time to service it’s request and the result
has been discarded.
Action: If the problem persists, contact your IBM
service representative.
Name: pdwpi_s_worker_cleaned
AMZIC0540E Error limit reached on worker thread
%d - recovery failed.
Explanation: A worker thread has encountered a large
number of errors while attempting to service IPC
requests and the attempt to recover has failed.
Action: Restart the Tivoli Access Manager Plug-in for
Web Servers authorization server. If the problem
322
Error Message Reference
Number: 0x35f0221f (904929823)
Severity: Warning
Component: pic / pd_wpi_s_proxy_if
AMZIC0544E There is not enough allocated memory,
used for communication between the
plug-in and the authorization server, to
hold the specified data.
Explanation: Shared memory is used for
communication between the plug-in and the
authorization server. The amount of shared memory
allocated cannot be dynamically increased and as such
is configured through the configuration file. An attempt
has been made to copy a larger amount of data into the
shared memory than is currently available.
Action: Either locate the cause of the excessive use of
memory and correct the problem, or increase the size of
allocated shared memory. If the problem persists,
contact your IBM service representative.
Name: pdwpi_m_no_shared_mem_left
Number: 0x35f02220 (904929824)
Severity: Error
Component: pic / pd_wpi_s_proxy_if
The system
mit for the maximum number of IPC
shared memory segments has been
reached.
Explanation: An attempt to set up the IPC between
the plug-in and the authorization server failed due to
an operating system limitation on the maximum
number of IPC shared memory segments which may be
opened by a single process.
Action: Increase the system limit for the maximum
number of shared memory segments allowed per
process. On AIX® this can be done by setting the
EXTSHM environment variable to ON. If the problem
persists contact your IBM service representative.
AMZIC0579E The command line option ’-%c’ is not
recognized.
Explanation: The identified option is not recognized
by the command generating the message.
Action: Specify correct options to the command.
Name: pdwpi_m_invalid_option
Number: 0x35f02243 (904929859)
Severity: Error
Component: pic / pd_wpi_s_version
AMZIC0640E There is no message string for message
code %#x.
Explanation: No message string is defined for the
identified error code.
Action: Ensure that the correct version of the Tivoli
Access Manager Plug-in for Web Servers language pack
is installed. If the problem persists, contact your IBM
service representative.
Name: pdwpi_m_invalid_message
Number: 0x35f02280 (904929920)
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0641E An error was received from the
authorization server: error: %s (error
code: %#x).
Explanation: The Tivoli Access Manager Plug-in for
Web Servers authorization server returned an error to
the plug-in.
Number: 0x35f02221 (904929825)
Action: Examine the log file for the Tivoli Access
Manager Plug-in for Web Servers authorization server
for more detailed messages about the error.
Severity: Error
Name: pdwpi_m_proxy_error
Component: pic / pd_wpi_s_proxy_if
Number: 0x35f02281 (904929921)
Name: pdwpi_s_ipc_open_file_limit
Severity: Error
AMZIC0577E pdwpi-version: The command line
option ’-%c’ is not recognized.
Component: pic / pd_wpi_s_plugin
Explanation: The option passed to the identified
command is invalid.
AMZIC0642E An unknown message type was
received from the authorization server:
%#x
Action: Specify correct options to the command.
Number: 0x35f02241 (904929857)
Explanation: The Tivoli Access Manager Plug-in for
Web Servers authorization server returned an unknown
message type to the plug-in.
Severity: Error
Action: Contact your IBM service representative.
Component: pic / pd_wpi_s_version
Name: pdwpi_m_proxy_unknown_msg
Name: pdwpi_m_version_invalid_option
Number: 0x35f02282 (904929922)
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
323
Severity: Error
Component: pic / pd_wpi_s_plugin
Component: pic / pd_wpi_s_plugin
AMZIC0643E The HTTP buffer could not be
marshalled: error: %s (error code: %#x).
Explanation: The HTTP buffer could not be
marshalled for transmission to the Tivoli Access
Manager Plug-in for Web Servers authorization server.
Action: Contact your IBM service representative.
Name: pdwpi_m_http_buffer_marshal
Number: 0x35f02283 (904929923)
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0644E The client IP address could not be
marshalled: error: %s (error code: %#x).
Explanation: The client IP address could not be
marshalled for transmission to the Tivoli Access
Manager Plug-in for Web Servers authorization server.
Action: Contact your IBM service representative.
Name: pdwpi_m_client_ip_marshal
Number: 0x35f02284 (904929924)
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0645E The request URI could not be
marshalled: error: %s (error code: %#x).
Explanation: The request URI could not be marshalled
for transmission to the Tivoli Access Manager Plug-in
for Web Servers authorization server.
Action: Contact your IBM service representative.
Name: pdwpi_m_uri_marshal
Number: 0x35f02285 (904929925)
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0646E The request security level could not
marshalled: error: %s (error code: %#x).
Explanation: The request security level (HTTP or
HTTPS) could not be marshalled for transmission to the
Tivoli Access Manager Plug-in for Web Servers
authorization server.
AMZIC0647E The request security information could
not marshalled: error: %s (error code:
%#x).
Explanation: The request security information could
not be marshalled for transmission to the Tivoli Access
Manager Plug-in for Web Servers authorization server.
Action: Contact your IBM service representative.
Name: pdwpi_m_security_session_marshal
Number: 0x35f02287 (904929927)
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0649E An invalid transaction has been
received from the authorization server.
Explanation: The transaction received from the Tivoli
Access Manager Plug-in for Web Servers authorization
server is invalid.
Action: Contact your IBM service representative.
Name: pdwpi_m_invalid_transaction
Number: 0x35f02289 (904929929)
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0651E Failed to set the header in the request:
error: %s (error code: %#x).
Explanation: The plug-in could not set the header in
the HTTP request.
Action: Contact your IBM service representative with
the specified message.
Name: pdwpi_m_set_header_failed
Number: 0x35f0228b (904929931)
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0652E Failed to add a header to the request:
error: %s (error code: %#x).
Explanation: The plug-in could not add a header to
the HTTP request.
Action: Contact your IBM service representative with
the specified message.
Action: Contact your IBM service representative.
Name: pdwpi_m_add_header_failed
Name: pdwpi_m_security_marshal
Number: 0x35f0228c (904929932)
Number: 0x35f02286 (904929926)
Severity: Error
Severity: Error
Component: pic / pd_wpi_s_plugin
324
Error Message Reference
AMZIC0653E Failed to set the URI on the request:
error: %s (error code: %#x).
AMZIC0657E Failed to set the body of the response:
error: %s (error code: %#x).
Explanation: The plug-in could not set the URI on the
HTTP request.
Explanation: The plug-in could not set the body of the
HTTP response.
Action: Contact your IBM service representative with
the specified message.
Action: Contact your IBM service representative with
the specified message.
Name: pdwpi_m_set_uri_failed
Name: pdwpi_m_set_body_failed
Number: 0x35f0228d (904929933)
Number: 0x35f02291 (904929937)
Severity: Error
Severity: Error
Component: pic / pd_wpi_s_plugin
Component: pic / pd_wpi_s_plugin
AMZIC0654E Failed to set the query on the request:
error: %s (error code: %#x).
AMZIC0658E Failed to set the content type of the
response: error: %s (error code: %#x).
Explanation: The plug-in could not set the query on
the HTTP request.
Explanation: The plug-in could not set the content
type of the HTTP response.
Action: Contact your IBM service representative with
the specified message.
Action: Contact your IBM service representative with
the specified message.
Name: pdwpi_m_set_query_failed
Name: pdwpi_m_set_content_type_failed
Number: 0x35f0228e (904929934)
Number: 0x35f02292 (904929938)
Severity: Error
Severity: Error
Component: pic / pd_wpi_s_plugin
Component: pic / pd_wpi_s_plugin
AMZIC0655E Failed to set a header in the response:
error: %s (error code: %#x).
AMZIC0659E Failed to set the response code of the
response: error: %s (error code: %#x).
Explanation: The plug-in could not set a header in the
HTTP response.
Explanation: The plug-in could not set the response
code of the HTTP response.
Action: Contact your IBM service representative with
the specified message.
Action: Contact your IBM service representative with
the specified message.
Name: pdwpi_m_set_header_failed_response
Name: pdwpi_m_set_rsp_code_failed
Number: 0x35f0228f (904929935)
Number: 0x35f02293 (904929939)
Severity: Error
Severity: Error
Component: pic / pd_wpi_s_plugin
Component: pic / pd_wpi_s_plugin
AMZIC0656E Failed to add a header to the response:
error: %s (error code: %#x).
AMZIC0660E Failed to request a client certificate:
error: %s (error code: %#x).
Explanation: The plug-in could not add a header to
the HTTP response.
Explanation: The plug-in could not request a client
certificate.
Action: Contact your IBM service representative with
the specified message.
Action: Contact your IBM service representative with
the specified message.
Name: pdwpi_m_add_header_failed_response
Name: pdwpi_m_req_client_cert_failed
Number: 0x35f02290 (904929936)
Number: 0x35f02294 (904929940)
Severity: Error
Severity: Error
Component: pic / pd_wpi_s_plugin
Component: pic / pd_wpi_s_plugin
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
325
AMZIC0661E An unsupported command was
received from the authorization server
(%#x)
Explanation: A ’command’ represents an operation
that the authorization server requires the Web server
plug-in to perform to process an HTTP request or
response. This message indicates that the Web server
plug-in does not implement a command received from
the authorization server. This can only happen if the
Web server plug-in and the authorization server are not
from the same version of Tivoli Access Manager
Plug-in for Web Servers.
Action: Verify that Tivoli Access Manager Plug-in for
Web Servers is installed and configured correctly. In
particular verify that the Web server and authorization
server have been restarted after any upgrade or fix
pack installation. To determine version information on
these components run the command ’pdwpi-version -l’
and look for mismatches. Installations with fixpacks
applied may have components with differing
maintenance levels as indicated by the last element of
the version number.
Name: pdwpi_m_unsupported_proxy_command
Number: 0x35f02295 (904929941)
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0662E An invalid command was received
from the authorization server (%#x)
AMZIC0663E An invalid certificate was passed to
the plug-in: error: %s (error code: %#x).
Explanation: An invalid certificate was passed to the
plug-in.
Action: Contact your IBM service representative with
the specified message.
Name: pdwpi_m_invalid_cert
Number: 0x35f02297 (904929943)
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0664E The Web server configuration file did
not contain the necessary authorization
server ID.
Explanation: The Sun Java System Web Server
configuration file does not contain the authorization
server IPC ID for the Tivoli Access Manager plug-in to
use when communicating with the Tivoli Access
Manager Plug-in for Web Servers authorization server.
This parameter must be specified on the ’Init fn’ line
for the Sun Java System plug-in in the magnus.conf file
for the Sun Java System Web Server reporting this
error.
Action: Unconfigure and reconfigure the Tivoli Access
Manager Plug-in for Web Servers for all virtual hosts
serviced by the Sun Java System Web Server. If the
problem persists, contact your IBM service
representative.
Explanation: A ’command’ represents an operation
that the authorization server requires the Web server
plug-in to perform to process an HTTP request or
response. This message indicates that the Web server
plug-in does not recognize a command received from
the authorization server. This can only happen if the
Web server plug-in and the authorization server are not
from the same version of Tivoli Access Manager
Plug-in for Web Servers.
Name: pdwpi_m_no_proxy_id
Action: Verify that Tivoli Access Manager Plug-in for
Web Servers is installed and configured correctly. In
particular verify that the Web server and authorization
server have been restarted after any upgrade or fix
pack installation. To determine version information on
these components run the command ’pdwpi-version -l’
and look for mismatches. Installations with fixpacks
applied may have components with differing
maintenance levels as indicated by the last element of
the version number.
Explanation: The Sun Java System Web Server
configuration file does not contain the HTTP response
code for the Tivoli Access Manager plug-in to use when
generating a response that indicates the Tivoli Access
Manager Plug-in for Web Servers authorization server
is not available. This parameter must be specified on
the ’Init fn’ line for the Sun Java System plug-in in the
magnus.conf file for the Sun Java System Web Server
reporting this error.
Number: 0x35f02298 (904929944)
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0665E The Web server configuration file does
not contain the necessary response code.
Severity: Error
Action: Unconfigure and reconfigure the Tivoli Access
Manager Plug-in for Web Servers for all virtual hosts
serviced by the Sun Java System Web Server. If the
problem persists, contact your IBM service
representative.
Component: pic / pd_wpi_s_plugin
Name: pdwpi_m_no_wpi_rsp_code
Name: pdwpi_m_invalid_proxy_command
Number: 0x35f02296 (904929942)
Number: 0x35f02299 (904929945)
326
Error Message Reference
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0666E Failed to initialize the authorization
server interface: error: %s (error code:
%#x).
Explanation: The Tivoli Access Manager Plug-in for
Web Servers authorization server does not appear to be
running.
Action: Contact your IBM service representative.
Name: pdwpi_m_proxy_if_init_failed
AMZIC0669E A client certificate could not
automatically be requested by the Web
server. The Web server configuration
must be modified to require the browser
to present a client certificate.
Explanation: The client certificate authentication
module has been enabled but the Web server cannot
renegotiate an existing SSL or TLS connection to
request a client certificate from the client.
Action: Modify the Web server configuration to
require client certificates.
Number: 0x35f0229a (904929946)
Name: pdwpi_m_plugin_req_client_cert_
not_supported
Severity: Error
Number: 0x35f0229d (904929949)
Component: pic / pd_wpi_s_plugin
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0667E A request could not be dispatched to
the authorization server: error: %s (error
code: %#x).
Explanation: A request could not be sent to the Tivoli
Access Manager Plug-in for Web Servers authorization
server for processing.
Action: Restart the Web server and the Tivoli Access
Manager Plug-in for Web Servers authorization server.
If the problem persists, contact your IBM service
representative.
Name: pdwpi_m_proxy_dispatch_error
Number: 0x35f0229b (904929947)
AMZIC0670E The plug-in trace level could not be set
according to the level in the request:
error: %s (error code: %#x).
Explanation: The plug-in trace level could not be set
according to the level in the request.
Action: Contact your IBM service representative.
Name: pdwpi_m_set_trace_level
Number: 0x35f0229e (904929950)
Severity: Error
Component: pic / pd_wpi_s_plugin
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0671E The body of the request could not be
changed: error: %s (error code: %#x).
AMZIC0668E The plug-in could not be initialized:
error: %s (error code: %#x).
Explanation: The plug-in could not set the body of the
HTTP request.
Explanation: The plug-in module could not be
successfully initialized. This error most likely occurred
because the Tivoli Access Manager Plug-in for Web
Servers authorization server is not available.
Action: Contact your IBM service representative.
Action: Ensure that the Tivoli Access Manager Plug-in
for Web Servers authorization server is running.
Otherwise contact your IBM service representative with
the specified message.
Severity: Error
Name: pdwpi_m_plugin_init_error
Number: 0x35f0229c (904929948)
Name: pdwpi_m_req_set_body_failed
Number: 0x35f0229f (904929951)
Component: pic / pd_wpi_s_plugin
AMZIC0672E The Web response could not be
captured: error: %s (error code: %#x).
Severity: Error
Explanation: The plug-in could not capture the Web
response.
Component: pic / pd_wpi_s_plugin
Action: Contact your IBM service representative.
Name: pdwpi_m_set_capture_rsp_failed
Number: 0x35f022a0 (904929952)
Severity: Error
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
327
Component: pic / pd_wpi_s_plugin
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0673E The buffer for the Web server request
body is too small to contain all of the
data.
Explanation: The Tivoli Access Manager Web server
plug-in attempted to replace the body of a request but
could not do it because the buffer supplied by the Web
server was too small.
Action: Contact your IBM service representative.
Name: pdwpi_s_body_buffer_too_small
Number: 0x35f022a1 (904929953)
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0674E The plug-in could not connect to the
plug-in response listener.
Explanation: The plug-in attempted to capture a Web
response but could not connect to the listener that
would read the response.
Action: Restart the Web server. If the problem persists,
contact your IBM service representative.
AMZIC0677E The Web server configuration file did
not contain the necessary response
workers field.
Explanation: The Sun Java System Web Server
configuration file does not specify the number of
response worker threads required for the Tivoli Access
Manager plug-in to use when intercepting responses
generated by the Web Server. This parameter must be
specified on the ’Init fn’ line for the Sun Java System
plug-in in the magnus.conf file for the Sun Java System
Web Server reporting this error.
Action: Unconfigure and reconfigure the Tivoli Access
Manager Plug-in for Web Servers for all virtual hosts
serviced by the Sun Java System Web Server. If the
problem persists, contact your IBM service
representative.
Name: pdwpi_m_no_wpi_rsp_workers
Number: 0x35f022a5 (904929957)
Severity: Error
Component: pic / pd_wpi_s_plugin
Name: pdwpi_s_no_response_listener
Number: 0x35f022a2 (904929954)
Severity: Error
AMZIC0678E The user to be recorded in the Web
server log could not be modified: error:
%s (error code: %#x).
Component: pic / pd_wpi_s_plugin
Explanation: The plug-in could not modify the user
name to be recorded in the Web server log.
AMZIC0675E The plug-in response listener could
not be initialized.
Action: Contact your IBM service representative.
Explanation: The plug-in response listener could not
be initialized.
Number: 0x35f022a6 (904929958)
Action: Restart the Web server. If the problem persists,
contact your IBM service representative.
Name: pdwpi_m_set_web_log_user_failed
Severity: Error
Component: pic / pd_wpi_s_plugin
Name: pdwpi_s_response_listener_initialization_ failed
Number: 0x35f022a3 (904929955)
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0679E The method of the request could not
be set: error: %s (error code: %#x).
Explanation: The plug-in could not set the method on
the HTTP request.
Action: Contact your IBM service representative.
AMZIC0676E Invalid data was received while
capturing a Web response.
Explanation: The plug-in was expecting certain data
while capturing a response from the Web server, but
instead received other data.
Action: Contact your IBM service representative.
Name: pdwpi_m_invalid_captured_rsp_data
Number: 0x35f022a4 (904929956)
328
Error Message Reference
Name: pdwpi_m_set_method_failed
Number: 0x35f022a7 (904929959)
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0680E The version of the request could not
be set: error: %s (error code: %#x).
Explanation: The plug-in could not set the version on
the HTTP request.
AMZIC0684E This request cannot be processed
successfully as the hook mechanism was
not initialized.
Name: pdwpi_m_set_version_failed
Explanation: The hook mechanism was not initialized
successfully. The functionality that depends on the
hook mechanism will not work until the problem is
corrected.
Number: 0x35f022a8 (904929960)
Action: Contact your IBM service representative.
Severity: Error
Name: pdwpi_s_apache_hook_failed_ uninitialized
Component: pic / pd_wpi_s_plugin
Number: 0x35f022ac (904929964)
Action: Contact your IBM service representative.
Severity: Error
AMZIC0681E The Web response under construction
could not be reset to an empty response:
error: %s (error code: %#x).
Explanation: The Web response under construction
could not be reset to an empty response.
Action: Contact your IBM service representative.
Name: pdwpi_m_begin_new_rsp_failed
Number: 0x35f022a9 (904929961)
Component: pic / pd_wpi_s_plugin
AMZIC0685E The hook mechanism failed because
thread-specific data could not be stored.
Explanation: An attempt to store thread-specific data
as part of the hook mechanism failed.
Action: Contact your IBM service representative.
Name: pdwpi_s_apache_hook_failed_tsd
Severity: Error
Number: 0x35f022ad (904929965)
Component: pic / pd_wpi_s_plugin
Severity: Error
AMZIC0682E The response body could not be set to
the default response body: error: %s
(error code: %#x).
Explanation: The plug-in could set the response body
to the default response body.
Component: pic / pd_wpi_s_plugin
AMZIC0686E The hook mechanism could not be
initialized because the Apache EAPI
hook registration failed.
Severity: Error
Explanation: The Apache EAPI hook function
registration failed. This usually indicates an
out-of-memory condition, but could also be an Apache
configuration problem. Functionality that depends on
the hook mechanism will not work until this problem is
corrected.
Component: pic / pd_wpi_s_plugin
Action: Contact your IBM service representative.
Action: Contact your IBM service representative.
Name: pdwpi_m_set_body_to_default_failed
Number: 0x35f022aa (904929962)
AMZIC0683W The hook mechanism could not be
initialized because the thread-specific
data key could not be created.
Explanation: The hook mechanism could not be
initialized. Some functionality will not work until this
problem is corrected, but the plug-in will continue to
run.
Action: Contact your IBM service representative.
Name: pdwpi_s_apache_hook_initialize_ failed_tsd
Number: 0x35f022ab (904929963)
Severity: Warning
Component: pic / pd_wpi_s_plugin
Name: pdwpi_s_apache_hook_initialize_
failed_aphook
Number: 0x35f022ae (904929966)
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0687E The hook mechanism failed because
the Apache EAPI hook registration
failed.
Explanation: Apache EAPI hook function registration
failed. This usually indicates an out-of-memory
condition, but could also be an Apache configuration
problem. Functionality that depends on the hook
mechanism will not work until this problem is
corrected.
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
329
Action: Contact your IBM service representative.
Severity: Error
Name: pdwpi_s_apache_hook_failed_aphook
Component: pic / pd_wpi_s_plugin
Number: 0x35f022af (904929967)
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0688E The response sub-code could not be
set: error: %s (error code: %#x).
Explanation: The plug-in could not set the sub-code
portion of the response status code for the HTTP
response.
Action: Contact your IBM service representative.
Name: pdwpi_m_set_rsp_sub_code_failed
Number: 0x35f022b0 (904929968)
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0689E The data could not be interpreted as
base64 encoded data.
AMZIC0693E The response to a request to URI %s in
virtual host %s using protocol %s could
not be captured.
Explanation: The Apache plug-in detected a condition
in which it could not correctly capture the response to
the request. The only such situation is when an internal
redirect or sub-request is issued in response to a
request made over the HTTP protocol, when using the
IBM HTTP Server with the SSL module loaded. The
response that was intended to be captured has been
sent to the client.
Action: There are several possible solutions to this
problem: change the way the response is generated, so
that an internal redirect or sub-request is not required;
change the configuration of the Tivoli Access Manager
Plug-in for Web Servers authorization module that
requires the response to be captured, so that it does not
attempt to capture the response to requests to this URI;
remove the SSL module from the IBM HTTP Server
configuration; or require requests to be made using the
HTTPS protocol.
Explanation: The data could not be interpreted as
base64 encoded data.
Name: pdwpi_m_apache_response_capture_ failed
Action: Contact your IBM service representative.
Number: 0x35f022b5 (904929973)
Name: pdwpi_s_base64_decode_failed
Severity: Error
Number: 0x35f022b1 (904929969)
Component: pic / pd_wpi_s_plugin
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0690E The data could not be interpreted as
an X.509 certificate.
Explanation: The data could not be interpreted as an
X.509 certificate.
Action: Contact your IBM service representative.
Name: pdwpi_s_x509_decode_failed
Number: 0x35f022b2 (904929970)
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0691E The body of the request could not be
requested: error: %s (error code: %#x).
Explanation: The plug-in could not request the body
of the HTTP request.
Action: Contact your IBM service representative with
the specified message.
Name: pdwpi_m_req_get_body_failed
Number: 0x35f022b3 (904929971)
330
Error Message Reference
AMZIC0694E A request body could not be supplied
for a request to URI %s in virtual host
%s using protocol %s. A Server Error
response has been sent to the client.
Explanation: The Apache plug-in detected a condition
in which it could not supply the request body for the
request. This situation occurs when a sub-request or
internal redirect is issued before the request body has
been read, when the request was not made using the
SSL protocol, and the IBM HTTP Server SSL module is
loaded. The most common cause of this situation is the
use of the Action directive in the IBM HTTP Server
configuration file to specify a request handler for a
given MIME type.
Action: There are several possible solutions to this
problem: change the way the request is handled, so
that an internal redirect or sub-request is not required;
change the configuration of the Tivoli Access Manager
Plug-in for Web Servers authorization module that is
supplying a body for the request; remove the SSL
module from the IBM HTTP Server configuration; or
require requests to be made using the HTTPS protocol.
Name: pdwpi_m_apache_set_request_ body_failed
Number: 0x35f022b6 (904929974)
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0695E An attempt to execute an Sun Java
System Web Server directive (%s) has
failed: %d.
Explanation: The Sun Java System plugin, as a part of
capturing the response, has attempted to execute a
matching directive and the directive has failed.
Action: Check the configuration for the directive
within the obj.conf file and ensure that it is valid.
Name: pdwpi_m_iplanet_execute_failure
Number: 0x35f022b7 (904929975)
AMZIC0698I The Apache 2.0 Plug-in was unable to
retrieve the SSL variable lookup
function. SSL-related functionality will
not be available.
Explanation: The Apache 2.0 Plug-in relies on a
function provided by the Apache SSL module to access
SSL variable data. This function was not located.
Action: Ensure the Apache SSL module is correctly
configured and installed.
Name: pdwpi_m_apache20_no_ssl_var_ lookup_fn
Number: 0x35f022ba (904929978)
Severity: Notice
Component: pic / pd_wpi_s
Severity: Error
Component: pic / pd_wpi_s_plugin
AMZIC0704E The cross domain single sign-on
operation failed.
AMZIC0696E A failure has been detected during the
processing of an internal Sun Java
System Web Server sub-request.
Explanation: A call into the cross domain single
sign-on system failed with an unexpected error.
Explanation: A Sun Java System Web Server internal
sub-request is instigated when the plug-in attempts to
capture a response. A failure has been detected while
attempting to process the sub-request.
Action: Examine the log file for the Sun Java System
Web Server for more detailed messages about the error.
Action: Examine the log for the context of the failure
and contact your IBM service representative.
Name: pdwpi_s_cdsso_failure
Number: 0x35f022c0 (904929984)
Severity: Error
Component: pic / pd_wpi_s_cdsso
Name: pdwpi_s_iplanet_sub_request_ failure
Number: 0x35f022b8 (904929976)
AMZIC0705E The cross domain single sign-on
system failed with an unexpected error:
%#x
Severity: Error
Component: pic / pd_wpi_s
Explanation: A call into the cross domain single
sign-on system failed with an unexpected error.
AMZIC0697E No service directives were found to
handle the request for %s.
Explanation: A HTTP request has been received by
the web server for which there is no matching service
directive.
Action: Examine the log file for the Sun Java System
Web Server for more detailed messages about the error.
Ensure that the Sun Java System Web Server has been
configured to correctly handle the request.
Name: pdwpi_m_iplanet_no_service_handler
Number: 0x35f022b9 (904929977)
Severity: Error
Component: pic / pd_wpi_s
Action: Examine the log for the context of the failure
and contact your IBM service representative.
Name: pdwpi_m_cdsso_failure
Number: 0x35f022c1 (904929985)
Severity: Error
Component: pic / pd_wpi_s_cdsso
AMZIC0706W The authentication token could not be
decoded.
Explanation: The decoding of the token has failed.
Action: Examine earlier messages in the log
containing this message for more information regarding
the particular decoding operation that has failed.
Ensure that the configuration of the Tivoli Access
Manager Plug-in for Web Servers authorization server
specifies the correct encryption key to decode tokens
generated by the source of the token.
Name: pdwpi_s_dec_authtok
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
331
Number: 0x35f022c2 (904929986)
Action: Contact your IBM service representative.
Severity: Warning
Name: pdwpi_s_no_failover_key
Component: pic / pd_wpi_s_cdsso
Number: 0x35f022c8 (904929992)
Severity: Warning
AMZIC0707E The authentication token could not be
encoded.
Explanation: The authentication token could not be
encoded. This is an unexpected internal error.
Action: Contact your IBM service representative.
Name: pdwpi_s_enc_authtok
Number: 0x35f022c3 (904929987)
Severity: Error
Component: pic / pd_wpi_s_cdsso
AMZIC0710E [%s:%s] The URL ’%s’ is incorrectly
formatted to use for single sign-on.
Explanation: Either a cross domain single sign-on link
has been incorrectly set up on a remote system or an
incorrectly formed e-community single sign-on request
has been received. If you are using both single sign-on
mechanisms, the particular module is indicated in the
message.
Action: In the cross domain single sign-on case, ask
the administrator of the remote site to check the link. In
the e-community single sign-on case contact your IBM
service representative.
Name: pdwpi_m_bad_cdsso_url
Number: 0x35f022c6 (904929990)
Severity: Error
Component: pic / pd_wpi_s_cdsso
Component: pic / pd_wpi_s_cdsso
AMZIC0713W An internal error occurred while
encoding or decoding the authentication
token.
Explanation: An internal error occurred while
encoding or decoding the authentication token. This is
an internal processing failure.
Action: Contact your IBM service representative.
Name: pdwpi_s_authtok_internal
Number: 0x35f022c9 (904929993)
Severity: Warning
Component: pic / pd_wpi_s_cdsso
AMZIC0714W There is no encryption key configured
for the server or domain identified in
the request.
Explanation: There is no encryption key configured
for the server or domain identified in the request.
Action: Set up the Tivoli Access Manager Plug-in for
Web Servers authorization server configuration to
identify the correct key file for the server or domain.
Name: pdwpi_s_no_cdsso_key
Number: 0x35f022ca (904929994)
Severity: Warning
Component: pic / pd_wpi_s_cdsso
AMZIC0711W The failover cookie contents have
expired.
Explanation: The failover cookie contents have
expired.
Action: No action is required.
Name: pdwpi_s_expired_failover
Number: 0x35f022c7 (904929991)
Severity: Warning
Component: pic / pd_wpi_s_cdsso
AMZIC0715W A cryptography error occurred during
cross domain single sign-on processing.
Explanation: A cryptography error occurred during
cross domain single sign-on processing.
Action: Contact your IBM service representative.
Name: pdwpi_s_cdsso_crypto_error
Number: 0x35f022cb (904929995)
Severity: Warning
Component: pic / pd_wpi_s_cdsso
AMZIC0712W The key for failover cookie encryption
and decryption could not be retrieved
from the internal key store.
Explanation: The key for failover cookie encryption
and decryption could not be retrieved from the internal
key store. This is an internal processing failure.
332
Error Message Reference
AMZIC0716E No failover cookie key is configured.
Explanation: Failover cookies have been enabled but
no key file has been specified.
Action: Either disable failover cookies or specify a key
file to use for failover cookies.
Name: pdwpi_s_no_failover_key_config
Number: 0x35f022cf (904929999)
Number: 0x35f022cc (904929996)
Severity: Warning
Severity: Error
Component: pic / pd_wpi_s_cdsso
Component: pic / pd_wpi_s_cdsso
AMZIC0717W The cross domain single sign-on
referrer could not be retrieved from the
request.
Explanation: Either the browser has not provided the
’Referer:’ header or the user has incorrectly entered a
cross domain single sign-on URL directly and not been
directed by a link.
Action: Ensure that the clients in use are generating
the ’Referer:’ header if required and educate users not
to enter cross domain single sign-on URLs directly in
their browsers.
AMZIC0720W [%s:%s] E-community cookie
generated by %s has expired.
Explanation: An e-community cookie was received in
a request but it has expired and is ignored.
Action: Check for clock skew between the generating
machine reported in the error and the receiving
machine. If the clocks are synchronized then the
ec-cookie-lifetime parameter might need to be increased
to allow for long network delays.
Name: pdwpi_m_ecsso_cookie_expired
Number: 0x35f022d0 (904930000)
Severity: Warning
Name: pdwpi_s_no_cdsso_referer
Component: pic / pd_wpi_s_cdsso
Number: 0x35f022cd (904929997)
Severity: Warning
AMZIC0721W [%s:%s] The vouch-for token
generated by %s has expired.
Component: pic / pd_wpi_s_cdsso
AMZIC0718W The token has a mismatched
protection level.
Explanation: The received token does not match the
configured token protection level. The token protection
level configuration of the token generator and
consumer must match.
Action: Modify the protection level in the
configuration file of the Tivoli Access Plug-in for Web
Servers authorization server or modify the token
protection level configuration specified at the source
server.
Explanation: The vouch-for token received in a
request has expired.
Action: Check for clock skew between the generating
machine reported in the error and the receiving
machine. If the clocks are synchronized, then the
vf-token-lifetime parameter might need to be increased
to allow for long network delays.
Name: pdwpi_m_ecsso_vf_token_expired
Number: 0x35f022d1 (904930001)
Severity: Warning
Component: pic / pd_wpi_s_cdsso
Name: pdwpi_s_cdsso_token_protlevel
Number: 0x35f022ce (904929998)
AMZIC0722W [%s:%s] The e-community cookie
generated by %s is for e-community
’%s’ - the expected e-community is ’%s’.
Severity: Warning
Component: pic / pd_wpi_s_cdsso
AMZIC0719W The e-community name in the request
does not match the configured
e-community name.
Explanation:
e-community
that does not
e-community
e-community
e-community
Another server participating in the
is configured with an e-community name
match this server’s configured
name. All participating servers within an
must be configured with the same
name.
Action: Ensure that the e-community name is
configured to be the same for all servers participating
in the e-community.
Explanation: The e-community cookie that was
received is for a different e-community than the one
that the identified virtual host is participating in.
Action: Check the value of the e-community-name
parameter on both this machine and the machine
reported as generating the cookie and correct the
configuration. The two community names must match.
Name: pdwpi_m_ecsso_cookie_ec_id_ mismatch
Number: 0x35f022d2 (904930002)
Severity: Warning
Component: pic / pd_wpi_s_cdsso
Name: pdwpi_s_cdsso_ecname_match
Chapter 3. Tivoli Access Manager for e-business Plug-in for Web Servers Messages
333
AMZIC0723W [%s:%s] The vouch-for token
generated by %s is for e-community
’%s’ - the expected e-community is ’%s’.
Explanation: A vouch-for token was received that is
for an e-community different from the one that the
identified virtual host is participating in.
Action: Check the value of the e-community-name
parameter on both this machine and the machine
reported as generating the vouch-for token and correct
the configuration. The two community names must
match.
Name: pdwpi_m_ecsso_vf_token_ec_id_ mismatch
Number: 0x35f022d3 (904930003)
Severity: Warning
Component: pic / pd_wpi_s_cdsso
AMZIC0724W [%s:%s] Vouch-for request received
from %.*s is for e-community ’%.*s’.
The expected e-community is ’%.*s’.
Explanation: A vouch-for token was received that is
for an e-community different from the one that the
identified virtual host is participating in.
Action: Check the value of the e-community-name
parameter on both this machine and the machine
reported as generating the vouch-for token and correct
the configuration. The two community names must
match.
AMZIC0726W [%s:%s] No e-community domain key
could be found matching domain ’%s’.
Explanation: A vouch-for token was received from a
machine that has no matching e-community domain
key configured.
Action: Servers generating vouch-for tokens in an
e-community must have an e-community domain key
configured that matches their domain name in order for
vouch-for tokens generated by them to be accepted.
Check and correct the e-community domain key
configuration for the machine that generated the
vouch-for token for the virtual host identified in the
error message.
Name: pdwpi_m_ecsso_unknown_domain
Number: 0x35f022d6 (904930006)
Severity: Warning
Component: pic / pd_wpi_s_cdsso
AMZIC0727E The fully qualified host name for the
server handling the request could not be
determined.
Explanation: The fully qualified host name for the
server handling the request could not be retrieved.
Action: Contact your IBM service representative.
Name: pdwpi_s_cdsso_hostname
Number: 0x35f022d7 (904930007)
Name: pdwpi_m_ecsso_vf_request_ec_ id_mismatch
Severity: Error
Number: 0x35f022d4 (904930004)
Component: pic / pd_wpi_s_cdsso
Severity: Warning
Component: pic / pd_wpi_s_cdsso
AMZIC0725W [%s:%s] The vouch-for request
contains an invalid URL: ’%.*s’.
Explanation: The URL received in a vouch-for request
was invalid. Either the generator of the vouch-for
request is generating invalid requests or a user has
entered a