Kissla | 601151 | Use and Care Manual | Kissla 601151 Use and Care Manual

Prepare Bottle
Pump
Collar
If your bottle has threads, screw adapter onto
bottle.
If your bottle does NOT have threads, remove the
cap and label from top of bottle.
Section B
Assemble Pump
Spout
Pump
Bottled
Water Pump
1.
Spout
2.
Collar
Section B
4.
Section B
Model 601151
© 2014
5.
Adapter
Section A
Distributed by:
Primo Water Corporation
104 Cambridge Plaza Drive
Winston-Salem, NC 27104
3.
Adapter
Assemble tubes by connecting sections to
desired length.
Attach assembled tubes to bottom of pump.
Attach spout to pump.
Insert assembled pump into bottle.
Turn collar to secure pump to bottle.
Use
Place cup, glass or pitcher under spout.
2. Press down on top of pump several times to
make water flow.
1.
Cleaning and Care
1. Clean pump with a cloth, mild dishwashing
soap and water.
2. Clean tubes and spout in dishwasher.
3. Store disassembled in a clean, dry location.
Questions
A
B
For expert advice, call us toll free at
866-429-7566 or visit www.KisslaDispensers.com
for additional information.
Download PDF