cordless radio - Canadian Tire
model no. 054-0932-4
CORDLESS RADIO
P
M
S
IMPORTANT:
Read and understand this instruction manual thoroughly
before using the product.
INSTRUCTION
MANUAL
headline bars
continuation tabs
notes
warnings
3
Technical Specifications
4
Safety Guidelines
5
Key Parts Diagram
8
Operating Instructions
10
Maintenance
14
Troubleshooting
15
Parts List
16
Warranty
18
NOTE:
If any parts are missing or damaged, or if you have any questions,
please call our toll-free helpline at 1-800-689-9928.
SAVE THESE INSTRUCTIONS
• This manual contains important safety and operating instructions. Read all
instructions and follow them with use of this product.
TABLE OF CONTENTS
TABLE OF CONTENTS
headline bars
4
model no. 054-0932-4 | contact us 1-800-689-9928
TECHNICAL SPECIFICATIONS
AM Tuner
520–1710 KHz
FM Tuner
87.5–108 MHz
Auxiliary Cable
3.5 mm plug
USB Charge Port
5V DC, 1A (max)
TECHNICAL SPECIFICATIONS
Weight (without battery)
1 lb 8 oz (0.69 kg)
continuation tabs
Compatible Battery Packs
1.5 Ah Li-ion (054-3124-0) (Sold separately)
3.0 Ah Li-ion (054-3125-8) (Sold separately)
Battery Chargers
054-3126-6 (Sold separately)
Preset channels
Speaker
20 AM/20 FM
notes
3 modes
5W
AM/FM/AUX
warnings
5
SAFETY GUIDELINES:
WARNING!
Safety symbols in this instruction manual are used to flag possible dangers. The safety
symbols and their explanations require your full understanding. The safety warnings do not,
by themselves, eliminate any danger, nor are they substitutes for proper accident prevention
measures.
WARNING!
KNOW YOUR TOOL
To operate this tool, carefully read this instruction manual and all labels affixed to the radio before
using. Keep this manual available for future reference.
IMPORTANT
This tool should only be serviced by a qualified service technician. For more information, call the tollfree helpline at 1-800-689-9928.
READ ALL INSTRUCTIONS THOROUGHLY
SAVE THESE INSTRUCTIONS
GENERAL SAFETY WARNINGS
WARNING!
Read all safety warnings and instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
WORK AREA SAFETY
•
Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
•
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks, which may ignite the dust or
fumes.
SAFETY GUIDELINES
This safety alert symbol indicates caution, warning, or danger. Failure to obey a safety
warning can result in serious injury to yourself or others. To reduce the risk of injury, fire, or
electric shock, always follow the safety precautions.
headline bars
6
model no. 054-0932-4 | contact us 1-800-689-9928
ELECTRICAL SAFETY
•
A battery operated product with integral batteries or a separate battery pack must be
recharged only with the specified charger for the battery. A charger that may be suitable
for one type of battery may create a risk of fire when used with another battery.
•
Use battery operated product only with specifically designated battery pack. Use of any
other batteries may create a risk of fire.
•
Use only with battery and charger listed.
SAFETY GUIDELINES
PERSONAL SAFETY
continuation tabs
•
Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
•
Do not use on a ladder or unstable support. Stable footing on a solid surface enables better
control of the product in unexpected situations.
PRODUCT USE AND CARE
notes
•
Do not use the product if the switch does not turn it on or off. Any product that cannot be
controlled with the switch is dangerous and must be repaired.
•
Disconnect battery pack from product or place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the product. Such
preventive safety measures reduce the risk of starting the product accidentally.
•
When battery pack is not in use, keep it away from other metal objects like: paper
clips, coins, keys, nails, screws, or other small metal objects that can make a
connection from one terminalwarnings
to another. Shorting the battery terminals together may cause
sparks, burns, or a fire.
•
Keep the radio and its handle dry, clean and free from oil and grease. Always use a
clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any
strong solvents to clean your radio. Following this rule will reduce the risk of loss of control and
deterioration of the enclosure plastic.
•
Do not use this apparatus near water.
•
Clean only with dry cloth.
•
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
•
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
•
Only use attachments/accessories specified by the manufacturer.
SERVICE
•
Have your product serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
7
•
Know your product. Read the operator’s manual carefully. Learn the applications and
limitations, as well as the specific potential hazards related to this product. Following
this rule will reduce the risk of electric shock, fire, or serious injury.
•
Battery products do not have to be plugged into an electrical outlet; therefore, they
are always in operating condition. Be aware of possible hazards when not using your
battery product or when changing accessories. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
•
Do not place battery products or their batteries near fire or heat. This will reduce the risk
of explosion and possibly injury.
•
To reduce the risk of electric shock, do not expose to water or rain.
•
Do not use the radio to listen to music or other audio programs while operating
machinery. Doing so may cause distractions that could result in serious personal injury.
•
This radio is capable of producing sound levels that can be dangerous to long-term
hearing. Listening to music at high volume for any period of time may cause noiseinduced hearing loss. The higher the volume, the less time required before your hearing may
be affected.
•
Save these instructions. Refer to them frequently and use them to instruct others who
may use this product. If you loan someone this product, loan them these instructions also.
•
The label on your product may include the following symbols. The symbols and their
definitions are as follows:
V ..................... Volts
A ..................... Amperes
Hz ................... Hertz
W .................... Watts
min ................. Minutes
................. Alternating current
............. Direct current
n0 ................... No-load speed
............... Class II Construction
…/min ........... Revolutions or reciprocation per minute
............... Grounding terminal
BPM ............... Beats per minute
.............. WARNING – To reduce the risk of injury, user must read instruction manual.
SAFETY GUIDELINES
SAFETY GUIDELINES FOR RADIO
headline bars
8
model no. 054-0932-4 | contact us 1-800-689-9928
PACKAGE CONTENTS:
Radio and instruction manual.
KEY PARTS DIAGRAM
continuation tabs
KEY PARTS DIAGRAM
1
2
P
M
S
notes
3
4
5
6
warnings
7
8
MHz
kHz
9
AM
FM
10
WARNING!
14
CH 88
BASS
PM
12
13
11
• Remove the radio from the package and examine it carefully. Do not discard the carton or any packaging material until all
parts have been examined.
No.
Description
No.
Description
1
Antenna
8
Volume down button
2
LCD display
9
Volume up button
3
Retainer strap
10
Tune/seek down button
4
USB power port
11
Tune/seek up button
5
Integrated auxiliary cable
12
On/off button
6
Battery port
13
Mode/scan button
7
Preset button
14
Bass/clock button
KEY PARTS DIAGRAM
9
headline bars
10
model no. 054-0932-4 | contact us 1-800-689-9928
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
TO INSTALL/REMOVE AAA
BATTERIES (fig 1)
fig 1
It is advisable to write down stored frequencies
before replacing the AAA batteries if, at the time of
AAA battery replacement, the 20V battery pack is
removed or has no charge. The radio will lose all
continuation
settings previously stored in memory when
replacingtabs
the AAA batteries in this situation, and they will
require reprogramming.
Screw
Always use new alkaline batteries for replacement.
1. Use a cross-head screwdriver to loosen the screw from the battery cover. Remove the screw.
2. Remove the battery cover.
notes
3. Install two new AAA batteries according to polarity indicators inside the battery compartment.
4. Replace the battery cover and secure it with the screw.
TO INSTALL/REMOVE 20 V BATTERY
PACK (fig 2)
To install:
1. Place the battery pack in the radio, aligning the
raised rib on the battery pack with the groove in the
warnings
radio’s battery port.
fig 2
Battery-release
button
2. Make sure that the latch on the battery pack snaps
into place and the battery pack is secured to the
radio.
To remove:
1. Depress the battery-release button, located on the front of the battery pack, to release the battery pack.
2. Pull the battery pack and remove it from the radio.
WARNING!
• Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
11
LCD DISPLAY
The LCD display on the front of the radio illuminates when the radio is turned on. It will display the
radio mode and frequency/channel setting. The LCD will be dark if there is no operation within 10
seconds.
Turning the radio on/off
Press and hold the button
for three seconds to turn the radio on or off.
When the radio is turned ON, it will initially return to the last volume setting used.
To increase the volume: Press the
button.
To decrease the volume: Press the
button.
To change volume quickly: Hold the
or
button.
EQ adjustment
To increase the bass sound, press the
button and quickly release it.
To go back to the preset balance setting press the
button and quickly release it again.
Mode selection
To switch modes, press the
digital display.
button and quickly release it. The selected mode will be shown in the
There are three modes:
•
FM mode.
•
AM mode.
•
AUX mode.
NOTICE:
• If AAA batteries have been installed, the time will be displayed when the radio is off, even if the 20 V battery pack is removed.
• If both 20 V battery pack and AAA batteries are removed from the radio or have no charge, the radio will return to the default
volume setting.
• When turned on, the radio will return to the last mode that was used, unless both AAA batteries and 20 V battery pack are
removed or have lost their charge.
OPERATING INSTRUCTIONS
Adjusting the volume
headline bars
12
model no. 054-0932-4 | contact us 1-800-689-9928
Changing channels
The buttons
are used to manually tune to the desired radio frequency. The selected frequency
is displayed on the digital display.
To use the tune feature:
1. Press the
or
button and quickly release it to manually scroll through radio channels one
frequency at a time.
OPERATING INSTRUCTIONS
To use the seek feature:
continuation tabs
1. Press and hold the
reception.
button for three seconds to tune to the next lowest frequency that has clear
2. Press and hold the
reception.
button for three seconds to tune to the next highest frequency that has clear
To use scan feature:
1. Press and hold the
notes
button for three seconds to scan through the band.
2. The scanning will pause when a channel is found, and all channels will be saved automatically in the
memory.
3. Press the
or
button to stop scanning.
To use the FM antenna:
Raise or lower radio antenna until the radio channel can be heard clearly.
Storing a preset in memory
warnings
The memory feature saves up to 40 frequencies as presets in the radio’s memory. You can save 20
frequencies in FM mode and 20 in AM mode.
To store a frequency in memory:
1. Tune to the frequency you want to save.
2. Press and hold the
button. A number designating a memory location will blink on and off.
3. Press the
or
4. Press the
button and quickly release it to store the frequency in the selected memory location.
button to select another memory location.
To recall a preset frequency:
1. Press the
button and quickly release it to cycle through the stored frequencies.
13
Setting the clock
The time is always displayed when the radio is turned off and in AUX mode.
To set the clock:
1. Press and hold the
button. The number representing the hours will blink on and off.
3. Press the
button quickly. The number representing the minutes will blink on and off.
4. Press the
or
5. Press the
button again to save.
button to set the minutes.
Using media player
1. Select AUX mode. Refer to “mode selection”.
2. The retainer strap may be used to secure the media player into position.
3. Connect the integrated auxiliary cable to the media player .
4. The media player must be ON and in PLAY mode for sound to be heard through the speaker.
5. All media player controls can be used normally while connected to the radio.
Charging/powering a USB device
The USB POWER PORT charges/powers most devices that can accept power through a USB connection.
The symbol
will be displayed when charging a USB device.
NOTICE:
• If both AAA batteries and 20 V battery pack are removed or lose their charge, the clock settings will be lost. Settings are not
affected by the removal of only the 20 V battery pack.
• If you do not press a button within 10 seconds, the clock programming feature will automatically return to the previous
setting.
• Volume for any device connected through the auxiliary connector can be adjusted using the volume control for that device or
with the the
or
buttons on the radio.
• Turning the radio OFF will not turn the media player OFF.
• The integrated auxiliary cable does not provide a charging function for auxiliary devices.
OPERATING INSTRUCTIONS
2. Press the
or
button to set the hour. For AM/PM settings, scroll through the first 12 numbers until
AM/PM is displayed.
headline bars
14
model no. 054-0932-4 | contact us 1-800-689-9928
MAINTENANCE
BEFORE EACH USE
1. Inspect the radio and the accessories for damage.
2. Check for damaged, missing, or worn parts.
3. Check for loose screws, misalignment or binding of moving parts, or any other condition that may affect
the operation.
tabs
4. If abnormal vibration or noise occurs,continuation
turn the product
off immediately and have the problem corrected
before further use.
5. Remove the batteries or battery pack from the radio before cleaning or performing any maintenance.
6. Using compressed air may be the most effective cleaning method. Always wear safety goggles when
cleaning product using compressed air.
MAINTENANCE
notes
warnings
WARNING!
• Do not let brake fluids, gasoline and petroleum-based products, penetrating oil, etc. come into contact with
plastic parts. These substances contain chemicals that can damage, weaken, or destroy plastic.
• When servicing, use only identical replacement parts. The use of any other parts may create a hazard or
cause damage to the product.
• Use only accessories that are recommended for this radio by the manufacturer. Accessories that may be
suitable for one tool may become hazardous when used with another tool.
• To ensure safety and reliability, all repairs should be performed by a qualified service technician.
15
TROUBLESHOOTING
Problem
Possible Causes
The radio does not work
The 20 V battery pack is depleted Charge the battery pack
Solution
The radio lost clock memory
and preset channels after the
20 V battery pack is removed
The AAA size batteries are
depleted
Replace the AAA batteries and
reprogram the settings.
TROUBLESHOOTING
If the problem remains unsolved after performing the checks described above, call the toll-free helpline
at 1-800-689-9928.
headline bars
16
model no. 054-0932-4 | contact us 1-800-689-9928
EXPLODED VIEW
continuation tabs
PARTS LIST
notes
warnings
17
No. Part No.
Description
No.
Part No.
Description
1
0540932401
Speaker grill
9
0540932409
Usb rubber cover
2
0540932402
Front cabinet
10
0540932410
Belt
3
0540932403
Speaker
11
0540932411
Fm antenna
4
0540932404
Main pcb board
12
0540932412
Back cabinet
5
0540932405
Charge socket
13
0540932413
Fm antenna connect pin
6
0540932406
Battery connect pin
14
0540932414
Fm antenna cover
7
0540932407
Aux cable fastener
15
0540932415
Lcd and control pcb board
8
0540932408
Battery cover
16
0540932416
Button cover
PARTS LIST
If the problem remains unsolved after performing the checks described above, call the toll-free helpline
at 1-800-689-9928.
headline bars
18
model no. 054-0932-4 | contact us 1-800-689-9928
continuation tabs
This Mastercraft product is guaranteed for a period of 3 years from the date of original retail
purchase against defects in workmanship and materials, except for the following components:
WARRANTY
a) Component A: Batteries, chargers and carrying case, which are guaranteed for a period of 2 years from
notes
the date of original retail purchase against defects in workmanship and materials;
b) Component B: Accessories, which are guaranteed for a period of 1 year from the date of original retail
purchase against defects in workmanship and materials.
Subject to the conditions and limitations described below, this product, if returned to us with proof
of purchase within the stated warranty period and if covered under this warranty, will be repaired or
replaced (with the same model, or one of equal value or specification), at our option. We will bear the
cost of any repair or replacement and any costs of labour relating thereto.
These warranties are subject to the following conditions and limitations:
a) a bill of sale verifying the purchase and
purchase date must be provided;
warnings
b) this warranty will not apply to any product or part thereof which is worn or broken or which has become
inoperative due to abuse, misuse, accidental damage, neglect or lack of proper installation, operation or
maintenance (as outlined in the applicable owner’s manual or operating instructions) or which is being
used for industrial, professional, commercial or rental purposes;
c) this warranty will not apply to normal wear and tear or to expendable parts or accessories that may be supplied
with the product that are expected to become inoperative or unusable after a reasonable period of use;
d) this warranty will not apply to routine maintenance and consumable items such as, but not limited to, fuel,
lubricants, vacuum bags, blades, belts, sandpaper, bits, fluids, tune-ups or adjustments;
e) this warranty will not apply where damage is caused by repairs made or attempted by others (i.e. persons
not authorized by the manufacturer);
f) this warranty will not apply to any product that was sold to the original purchaser as a reconditioned or
refurbished product (unless otherwise specified in writing);
g) this warranty will not apply to any product or part thereof if any part from another manufacturer is
installed therein or any repairs or alterations have been made or attempted by unauthorized persons;
19
h) this warranty will not apply to normal deterioration of the exterior finish, such as, but not limited to,
scratches, dents, paint chips, or to any corrosion or discolouring by heat, abrasive and chemical cleaners;
and
i) this warranty will not apply to component parts sold by and identified as the product of another company,
which shall be covered under the product manufacturer’s warranty, if any.
Additional Limitations
This warranty applies only to the original purchaser and may not be transferred. Neither the retailer nor
the manufacturer shall be liable for any other expense, loss or damage, including, without limitation,
any indirect, incidental, consequential or exemplary damages arising in connection with the sale, use or
inability to use this product.
Notice to Consumer
Made in China
Imported by
Mastercraft Canada Toronto, Canada M4S 2B8
WARRANTY
This warranty gives you specific legal rights, and you may have other rights, which may vary from
province to province. The provisions contained in this warranty are not intended to limit, modify, take
away from, disclaim or exclude any statutory warranties set forth in any applicable provincial or federal
legislation.
INSTRUCTION MANUAL
20V max* LITHIUM-ION
CORDLESS LED WORK LIGHT
054-3187-0
I
If any parts are missing
or damaged, or if you
have any questions,
please call our toll-free
helpline at 1-800-6899928.
Read and understand this
instruction manual thoroughly
before using the product.
It contains important
information for your safety
as well as operating and
maintenance advice.
Keep this instruction manual
for future use. Should this
product be passed on to a
third party, then this instruction
manual must be included.
20V max* LITHIUM-ION CORDLESS LED WORK LIGHT - 054-3187-0
3
SAFETY GUIDELINES 4–10
DESCRIPTION11
OPERATING INSTRUCTIONS 12–13
MAINTENANCE 14
TROUBLESHOOTING 15
PARTS LIST 16
WARRANTY 17–19
20V max* LITHIUM-ION CORDLESS LED WORK LIGHT - 054-3187-0
TABLE OF CONTENTS
2
TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS
3
HEAD PIVOT
0-115°
NUMBERS OF LED
20 pcs
ILLUMINATION AT 1m
>300 lux
RUN TIME
9 hours
TOOL WEIGHT
(WITHOUT BATTERY)
6 oz (0.17 kg)
BATTERY TYPE
Lithium-ion
BATTERY VOLTAGE
20V max* DC
CHARGER INPUT
120V, 60 Hz AC only
OPTIMUM CHARGING
TEMPERATURE0–40°C (32–104°F)
*Maximum battery voltage without workload; with workload
nominal voltage is 18V.
20V max* LITHIUM-ION CORDLESS LED WORK LIGHT - 054-3187-0
4
S afety symbols in this Instruction Manual are used to flag
possible dangers. The safety symbols and their explanations
require your full understanding. The safety warnings do
not, by themselves, eliminate any danger, nor are they
substitutes for proper accident prevention measures.
WARNING!
T his Safety Alert Symbol indicates caution, warning, or
danger. Failure to obey a safety warning can result in serious
injury to yourself or others. To reduce the risk of injury, fire,
or electric shock, always follow the safety precautions.
Know your tool
To operate this tool, carefully read this Instruction Manual and
all labels affixed to the Cordless LED Work Light before using.
Keep this manual available for future reference.
Important
This tool should only be serviced by a qualified service
technician. For more information, call the toll-free helpline at
1-800-689-9928.
Read all instructions thoroughly
Save these instructions
General power tool safety warnings
WARNING!
Read all safety warnings and instructions. Failure to
follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
20V max* LITHIUM-ION CORDLESS LED WORK LIGHT - 054-3187-0
SAFETY GUIDELINES
WARNING!
SAFETY GUIDELINES
5
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless)
power tool.
Work area safety
• Keep the work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks, which may ignite the
dust or fumes.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
• Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified plugs
and matching outlets will reduce the risk of electric shock.
• Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep the cord
away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
20V max* LITHIUM-ION CORDLESS LED WORK LIGHT - 054-3187-0
Personal safety
• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use the tool
while tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating power
tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, nonskid safety shoes, hard hat, or hearing protection, used for
appropriate conditions, will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying the
tool. Carrying power tools with your finger on the switch
or energising power tools that have the switch on invites
accidents.
• Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
20V max* LITHIUM-ION CORDLESS LED WORK LIGHT - 054-3187-0
SAFETY GUIDELINES
6
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground-fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the risk of
electric shock.
SAFETY GUIDELINES
7
• If devices are provided for the connection of dust
extraction and collection facilities, ensure that these
are connected and properly used. Use of these devices can
reduce dust-related hazards.
Power tool use and care
• Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and more safely at the rate for which it was designed.
• Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
• Use the power tool, accessories, tool bits, etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
20V max* LITHIUM-ION CORDLESS LED WORK LIGHT - 054-3187-0
8
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
• Use power tools only with specifically designated
battery packs. Use of any other battery packs may create a
risk of injury and fire.
• When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys, nails,
screws or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, also
seek medical help. Liquid ejected from the battery may
cause irritation or burns.
Service
• Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Safety guidelines for cordless LED work light
WARNING!
When using electric appliances, basic precautions
should always be followed, including the following:
• Read all the instructions before using the appliance.
• To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
• Do not contact moving parts.
20V max* LITHIUM-ION CORDLESS LED WORK LIGHT - 054-3187-0
SAFETY GUIDELINES
Battery tool use and care
SAFETY GUIDELINES
9
• Only use attachments recommended or sold by the
manufacturer.
• Do not use outdoors.
• To reduce the risk of electrical shock, do not put work
light and battery pack in water or other liquid. Do not
place or store appliance where it can fall or be pulled into a
tub or sink.
• Use only the recommended battery packs and charger
listed below. Any attempt to use another battery pack will
cause damage to the work light; it could possibly explode or
cause a fire or personal injury.
Battery pack
Charger
054-3124-0
054-3125-8
054-3126-6
• The label on your tool may include the following
symbols. The symbols and their definitions are as
follows:
V ..................... Volts
A ..................... Amperes
Hz ................... Hertz
W .................... Watts
min ................. Minutes
............... Alternating current
............. Direct current
n0 ................... No-load speed
Class II Construction
............... …/min ........... ............... Revolutions per minute
Grounding terminal
20V max* LITHIUM-ION CORDLESS LED WORK LIGHT - 054-3187-0
10
Beats per minute
.............. WARNING – To reduce the risk of injury,
user must read instruction manual.
Contents:
Cordless LED Light and instruction manual.
WARNING!
emove the Cordless LED Work Light from the
R
package and examine it carefully. Do not discard the
carton or any packaging material until all parts have
been examined.
WARNING!
If any part of the work light is missing or damaged,
do not attach the battery pack to the tool or use the
tool until the part has been repaired or replaced.
Failure to heed this warning could result in serious
injury.
20V max* LITHIUM-ION CORDLESS LED WORK LIGHT - 054-3187-0
SAFETY GUIDELINES
BPM ............... 11
DESCRIPTION
Know your tool
3
1
2
No.Description
No.Description
1
LEDs
3
2
On/Off Button
Work light Head
Before attempting to use this tool, become familiar with
all of its operating features and safety requirements. For
optimum performance and safety, read the following operating
instructions carefully before using.
WARNING!
o not allow familiarity with the Cordless LED Work
D
Light to cause a lack of alertness. A fraction of a
second of carelessness is enough to cause severe
injury.
20V max* LITHIUM-ION CORDLESS LED WORK LIGHT - 054-3187-0
12
fig 1
Latch
Detach
1.Align the raised platform
on the battery pack with
the grooves on the bottom
of the work light, and then
Attach
attach battery pack to the
work light as shown in fig 1.
2.Make sure that the latch on the battery pack snaps into place
and the battery pack is secured to the work light before
beginning operation.
NOTICE: When inserting the battery pack into the tool, make
sure that the raised platform on the pack aligns with the
grooves on the bottom of the tool and that the latches snap
properly into place. Improper assembly of the battery pack can
cause damage to internal components.
To detach the battery pack (fig 1)
1.Depress the battery-release buttons located on the front of
the battery pack to release the battery pack.
2.Pull the battery pack out and remove it from the tool.
Turn on/off the work
light (fig 2)
fig 2
Depress the on/off button to
turn on the work light; depress
On/Off
the switch button again to
button
turn off the work light.
20V max* LITHIUM-ION CORDLESS LED WORK LIGHT - 054-3187-0
OPERATING INSTRUCTIONS
To attach the battery
pack (fig 1)
OPERATING INSTRUCTIONS
13
To adjust the work light
head (fig 3)
fig 3
115°
The work light head
independently pivots 115° for
maximum flexibility. Move the
head by manually adjusting it
to any position within the 115°
pivot range. Do not force the head beyond the 115° range.
20V max* LITHIUM-ION CORDLESS LED WORK LIGHT - 054-3187-0
14
Avoid using solvents when cleaning plastic parts. Most plastics
are susceptible to damage from various types of commercial
solvents and may be damaged by their use. Use clean cloths to
remove dirt, dust, oil, grease, etc.
WARNING!
hen servicing, use only identical replacement
W
parts. Use of any other parts may create a hazard
or cause product damage. To ensure safety and
reliability, all repairs should be performed by a
qualified service technician.
WARNING!
o not at any time let brake fluids, gasoline,
D
petroleum-based products, penetrating oils, etc. to
come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic.
20V max* LITHIUM-ION CORDLESS LED WORK LIGHT - 054-3187-0
MAINTENANCE
General maintenance
15
TROUBLESHOOTING
PROBLEM
The work light
does not light
POSSIBLE CAUSES
The battery is
depleted
SOLUTIONS
Charge the battery
If the problem remains unsolved after performing the
checks described above, call the toll-free helpline at
1-800-689-9928.
20V max* LITHIUM-ION CORDLESS LED WORK LIGHT - 054-3187-0
16
Exploded view
2
18
3
17
4
16
5
15
6
14
7
13
8
12
9
11
10
No.Part No.
Description
No.Part No.
Description
1 3126251000Upper Housing 103402385000Contact
Receptacle
Assembly
2
3126250000 Transparent Guard 11 3126261000 Rubber Gasket
3 3705114000Reflector
123126258000Plate
4
13 4890821000 PCB Assembly
4890822000 PCB Assembly
5 5610012000Tapping Screw 143660318000Spring
6
3126252000 Lower Housing
15 3126253000 Switch Cover
7 3127173000Right Base
163126260000Pin
8
17 5610015000 Tapping Screw
5690004000 O Ring
9 3126259000Pin
183127172000Left Base
If any parts are missing or damaged, or if you have any
questions, please call the Toll-free Helpline, at 1-800-689-9928.
20V max* LITHIUM-ION CORDLESS LED WORK LIGHT - 054-3187-0
PARTS LIST
1
WARRANTY
17
This Mastercraft product is guaranteed three (3) years
from the date of original retail purchase against defects in
materials and workmanship, except for the following components:
a) Component A: Batteries, chargers and carrying case, which
are guaranteed for a period of 2 years from the date of original
retail purchase against defects in workmanship and materials;
b) Component B: Accessories, which are guaranteed for a
period of 1-year from the date of original retail purchase
against defects in workmanship and materials.
Subject to the conditions and limitations described below, this
product, if returned to us with proof of purchase within the
stated warranty period and if covered under this warranty, will be
repaired or replaced (with the same model, or one of equal value
or specification), at our option. We will bear the cost of any repair
or replacement and any costs of labour relating thereto.
These warranties are subject to the following
conditions and limitations:
a)a bill of sale verifying the purchase and purchase date must
be provided;
20V max* LITHIUM-ION CORDLESS LED WORK LIGHT - 054-3187-0
20V max* LITHIUM-ION CORDLESS LED WORK LIGHT - 054-3187-0
WARRANTY
18
b)this warranty will not apply to any product or part thereof
which is worn or broken or which has become inoperative
due to abuse, misuse, accidental damage, neglect or lack of
proper installation, operation or maintenance (as outlined in
the applicable owner’s manual or operating instructions) or
which is being used for industrial, professional, commercial
or rental purposes;
c)this warranty will not apply to normal wear and tear or to
expendable parts or accessories that may be supplied with
the product which are expected to become inoperative or
unusable after a reasonable period of use;
d)this warranty will not apply to routine maintenance and
consumable items such as, but not limited to, fuel, lubricants,
vacuum bags, blades, belts, sandpaper, bits, fluids, tune-ups
or adjustments;
e)this warranty will not apply where damage is caused by
repairs made or attempted by others (i.e. persons not
authorized by the manufacturer);
f) this warranty will not apply to any product that was sold
to the original purchaser as a reconditioned or refurbished
product (unless otherwise specified in writing);
g)this warranty will not apply to any product or part thereof if
any part from another manufacturer is installed therein or
any repairs or alterations have been made or attempted by
unauthorized persons;
h)this warranty will not apply to normal deterioration of the
exterior finish, such as, but not limited to, scratches, dents,
paint chips, or to any corrosion or discolouring by heat,
abrasive and chemical cleaners; and
WARRANTY
19
i) this warranty will not apply to component parts sold by and
identified as the product of another company, which shall be
covered under the product manufacturer’s warranty, if any.
Additional limitations
This warranty applies only to the original purchaser
and may not be transferred. Neither the retailer nor the
manufacturer shall be liable for any other expense, loss or
damage, including, without limitation, any indirect, incidental,
consequential or exemplary damages arising in connection with
the sale, use or inability to use this product.
Notice to consumer
This warranty gives you specific legal rights, and you may
have other rights, which may vary from province to province.
The provisions contained in this warranty are not intended to
limit, modify, take away from, disclaim or exclude any statutory
warranties set forth in any applicable provincial or federal
legislation.
IMPORTED BY MASTERCRAFT CANADA TORONTO, CANADA
M4S 2B8
20V max* LITHIUM-ION CORDLESS LED WORK LIGHT - 054-3187-0
INSTRUCTION MANUAL
20V max* LITHIUM-ION
BATTERY CHARGER
054-3126-6
If any parts are
missing or damaged,
or if you have any
questions, please call
our toll-free helpline
at 1-800-689-9928.
Read and understand this instruction manual
thoroughly before using the product. It contains
important information for your safety as well as
operating and maintenance advice.
Keep this instruction manual for future use. Should
this product be passed on to a third party, then this
instruction manual must be included.
20V max* LITHIUM-ION BATTERY CHARGER - 054-3126-6
3
SAFETY GUIDELINES 4–8
DESCRIPTION9
OPERATING INSTRUCTIONS 10–12
MAINTENANCE 13
TROUBLESHOOTING 14
PARTS LIST 15
WARRANTY16–17
20V max* LITHIUM-ION BATTERY CHARGER - 054-3126-6
TABLE OF CONTENTS
TECHNICAL SPECIFICATIONS 2
TECHNICAL SPECIFICATIONS
3
CHARGER INPUT
120V ~ 60Hz 45W
CHARGING TIMES FOR BATTERIES
054-3124-0:
054-3125-8:
CHARGER WEIGHT
1 lb (0.45kg)
OPTIMUM CHARGING
TEMPERATURE RANGE
5-40°C (41-104°F)
20V max* LITHIUM-ION BATTERY CHARGER - 054-3126-6
60 min
120 min
WARNING!
Safety symbols in this Instruction Manual are used to flag possible dangers. The safety
symbols and their explanations require your full understanding. The safety warnings do
not, by themselves, eliminate any danger, nor are they substitutes for proper accident
prevention measures.
WARNING!
This Safety Alert Symbol indicates caution, warning, or danger. Failure to obey a safety
warning can result in serious injury to yourself or others. To reduce the risk of injury, fire, or
electric shock, always follow the safety precautions.
Know your tool
To operate this tool, carefully read this Instruction Manual and all labels affixed to the Charger before
using it. Keep this Instruction Manual available for future reference.
Important
This tool should only be serviced by a qualified service technician. For more information, call the tollfree helpline at 1-800-689-9928.
Read all instructions thoroughly
Save these instructions
General power tool safety warnings
WARNING!
Read all safety warnings and instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or batteryoperated (cordless) power tool.
20V max* LITHIUM-ION BATTERY CHARGER - 054-3126-6
SAFETY GUIDELINES
4
5
Work area safety
SAFETY GUIDELINES
• Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks, which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
Electrical safety
• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
the cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the
risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a ground-fault circuit
interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
Personal safety
• Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of
inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as
dust mask, non-skid safety shoes, hard hat, or hearing protection, used for appropriate conditions,
will reduce personal injuries.
• Prevent unintentional starting. Ensure that the switch is in the off-position before connecting to
a power source and/or battery pack, picking up or carrying the tool. Carrying power tools with
your finger on the switch or plugging in power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool may result in personal injury.
20V max* LITHIUM-ION BATTERY CHARGER - 054-3126-6
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection
facilities, ensure that these are connected and properly used. Use of these devices can
reduce dust-related hazards.
Power tool use and care
• Do not force the power tool. Use the correct power tool for your application. The correct power
tool will do the job better and more safely at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may affect the power tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories, tool bits, etc., in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
Battery tool use and care
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated battery packs. The use of any other
battery pack may create a risk of injury and fire.
• When the battery pack is not in use, keep it away from other metal objects, such as paper
clips, coins, keys, nails, screws, or other small metal objects that can make a connection
from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
20V max* LITHIUM-ION BATTERY CHARGER - 054-3126-6
SAFETY GUIDELINES
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
6
SAFETY GUIDELINES
7
• Under abusive conditions, liquid may be ejected from the battery. Avoid contact. If contact
occurs, flush with water. If liquid comes into contact with the eyes, seek medical help. Liquid ejected
from the battery may cause irritation or burns.
Service
• Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Important safety instructions
WARNING!
Read and understand all instructions. Failure to follow all instructions listed below may
result in electric shock, fire, and/or serious personal injury.
CAUTION!
To reduce the risk of electric shock or damage to the charger and the battery, charge only
recommend rechargeable batteries as specifically designated on your charger. Other types
of batteries may burst, causing personal injury or damage.
• For indoor use only.
• Dry location use only.
• Risk of fire and electric shock.
• Risk of injury.
• SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for
battery charger Model 054-3126-6.
• Before using battery charger, read all instructions and cautionary markings on battery charger,
battery, and product using battery.
• CAUTION – To reduce risk of injury, charge only Mastercraft® 054-3124-0, 054-3125-8 20V
Rechargeable Battery Packs. Other types of battery packs may burst, causing injury to persons
and damage.
• To reduce risk of battery explosion, follow these instructions and those marked on the battery.
• Never charge a frozen battery.
• Do not operate charger in a closed-in area or restrict ventilation in any way.
• Do not use the charger outdoors or expose it to wet or damp conditions. Water entering the
charger will increase the risk of electric shock.
20V max* LITHIUM-ION BATTERY CHARGER - 054-3126-6
• Do not abuse the cord or charger. Never use the cord to carry the charger. Do not pull the
charger cord to disconnect the plug from a receptacle. Damage to the cord or charger could occur
and create an electric shock hazard. Replace damaged cords immediately.
• Make sure that the cord is located so that it will not be stepped on or tripped over, come
in contact with sharp edges or moving parts, or otherwise be subjected to damage or
stress. This will reduce the risk of accidental falls, which could cause injury and damage to the
cord, which could then result in electric shock.
• Keep the cord and charger away from heat to prevent damage to the housing or internal
parts.
• Do not allow gasoline, oils, petroleum-based products, etc., to come in contact with plastic
parts. These materials contain chemicals that can damage, weaken, or destroy plastic.
• Do not operate the charger with a damaged cord or plug, which could cause shorting and
electric shock. If damaged, have the charger repaired or replaced by a qualified service technician.
• Do not operate the charger if it has received a sharp blow, been dropped, or has
otherwise been damaged in any way. Take it to a qualified service technician for an electrical
check to determine if the charger is in good working order.
• Do not disassemble the charger. Take it to a qualified service technician when service or repair is
required. Incorrect reassembly may result in a risk of electric shock or fire.
• Unplug the charger from the electrical outlet before attempting any maintenance or
cleaning to reduce the risk of electric shock.
• Disconnect the charger from the power supply when it is not in use. This will reduce the risk
of electric shock or damage to the charger if metal items should fall into the opening. It will also help
prevent damage to the charger during a power surge.
• Risk of electric shock. Do not touch the uninsulated portion of the output connector or
uninsulated battery terminal.
• Save these instructions. Refer to them frequently and use them to instruct others who may use
this tool. If you lend this tool to someone else, also lend these instructions to them to prevent misuse
of the product and possible injury.
Contents
Battery Charger, Instruction Manual
20V max* LITHIUM-ION BATTERY CHARGER - 054-3126-6
SAFETY GUIDELINES
• Use of an attachment not recommended or sold by the battery-charger manufacturer may
result in a risk of fire, electric shock or injury to persons.
8
DESCRIPTION
9
Know your 20V max* lithium-ion battery charger
2
3
1
No.Description
1
LED lights
2
Electric contacts
No.Description
3
Air vents
Before attempting to use the charger, familiarize yourself with all of its operating features and safety
requirements.
WARNING!
Do not allow familiarity with the charger to cause carelessness. Remember that one
careless moment is enough to cause severe injury. Before attempting to use any tool, be
sure to become familiar with all of the operating features and safety instructions.
20V max* LITHIUM-ION BATTERY CHARGER - 054-3126-6
When to charge the battery pack
The Lithium-Ion battery pack can be charged at any time and will not develop a “memory” when charged
after only a partial discharge. It is not necessary to run down the battery pack charge before recharging.
Remove the battery pack from the tool and recharge it when it is convenient for you and your job.
• You can “top-off” your battery pack’s charge before starting a big job or a long period of use.
• Due to Lithium-Ion’s fade-free properties, the only time it is necessary to charge the Lithium-Ion
battery pack is when the pack has reached the end of its charge. To signal the end of charge, power
to the tool will drop quickly. Charge the battery pack as needed.
How to charge the battery pack (fig 1)
A fully discharged battery pack will charge in
about 60-120 minutes, depending on the battery,
at a temperature between 5-40°C (41-104°F).
fig 1
Attach
1. Charge the battery pack with the correct charger.
2. Connect the charger to a power supply.
3. Attach the battery pack to the charger by
aligning the raised ribs of the battery pack
with the slot in the charger. Slide the battery
pack onto the charger (fig 1).
4. The charger will communicate with the battery
pack circuitry to evaluate the condition of the battery pack.
5. The green LED light will flash continuously during normal charging.
6. After charging is complete, the green LED on the charger will remain on.
7. The battery pack will fully charge, but will not overcharge, if left on the charger.
20V max* LITHIUM-ION BATTERY CHARGER - 054-3126-6
Detach
OPERATING INSTRUCTIONS
10
OPERATING INSTRUCTIONS
11
LED functions of charger (fig 2)
LED Indicator
Battery Pack
Red LED
Green LED
Action
Temperature
Hot/Cold battery
On
Off
Fast charge will begin when
battery returns to between 5-40°C
(41-104°F)
Defective
Defective
Flashing
Off
Battery pack or charger is
defective
Charging
Charging
Off
Flashing
Charging
Charged
Fully charged
Off
On
Charging is complete
Charging a hot battery pack
If the battery pack is above the normal temperature range, the red LED will illuminate and the green
LED will be off. When the battery pack cools down to approximately 104°F (40°C), the charger will
automatically begin charging.
Charging a cold battery pack
If the battery pack is below the normal temperature range, the red LED will illuminate and the green
LED will be off. When the battery warms to a temperature of more than 41°F (5°C), the charger will
automatically begin charging.
Defective battery
If the charger detects a problem, the red LED will begin flashing and the green LED will be off.
1. If registering as defective, remove and reinsert the battery pack in the charger. If the LED status
reads “defective” a second time, try to charge a different battery pack.
2. If a different battery pack charges normally, dispose of the defective battery pack (see Maintenance
section).
3. If a different battery pack also indicates “defective,” the charger may be defective.
Battery charging
If the battery pack is within the normal temperature range, the green LED will begin flashing and the
red LED will be off.
20V max* LITHIUM-ION BATTERY CHARGER - 054-3126-6
Battery full
After the battery is fully charged, the green LED light on the charger will be on and the red LED light
will be off.
NOTICE: The battery pack will fully charge, but will not overcharge, if left on the charger.
NOTICE: Charger may warm with several continuous charge cycles. This is part of the normal operation
of the charge. Always charge in a well-ventilated area.
20V max* LITHIUM-ION BATTERY CHARGER - 054-3126-6
OPERATING INSTRUCTIONS
12
MAINTENANCE
13
WARNING!
To ensure safety and reliability, all repairs should be performed by a qualified service
technician.
WARNING!
When servicing, use only identical replacement parts. The use of any other parts may
create a hazard or cause damage to the product.
WARNING!
To avoid serious personal injury, always remove the battery pack from the tool when
cleaning it or performing any maintenance.
WARNING!
Always wear safety goggles or safety glasses with side shields when using compressed air
to clean the tool. If the operation is dusty, also wear a dust mask.
20V max* LITHIUM-ION BATTERY CHARGER - 054-3126-6
14
The battery pack isn’t
charging
POSSIBLE CAUSES
The battery pack is not connected to the
charger
SOLUTIONS
Attach the battery pack to the charger again
If the problem remains unsolved after performing the checks described above, call the tollfree helpline at 1-800-689-9928.
20V max* LITHIUM-ION BATTERY CHARGER - 054-3126-6
TROUBLESHOOTING
PROBLEM
Exploded view
PARTS LIST
15
No. Part No.
Description
13125529000 Drive Bracket
2 2823639000 Wiring Harness Assembly
3 3125527000 Upper Housing
45610012000 Tapping Screw
5 5610016000 Tapping Screw
No. Part No.
Description
64890750000 PCB Assembly
7 4890721000 PCB Assembly
8 3125528000 Lower Housing
95610218000 Screw
10 4810002000 Power Cord & Plug
If any parts are missing or damaged, or if you have any questions,
please call the Toll-free Helpline, at 1-800-689-9928.
20V max* LITHIUM-ION BATTERY CHARGER - 054-3126-6
This Mastercraft product is guaranteed for two (2) years from the date of original retail purchase
against defects in materials and workmanship, except for the following components
a) Component A: Batteries, chargers and carrying case, which are guaranteed for a period of 2 years
from the date of original retail purchase against defects in workmanship and materials;
b) Component B: Accessories, which are guaranteed for a period of 1-year from the date of original
retail purchase against defects in workmanship and materials.
Subject to the conditions and limitations described below, this product, if returned to us with proof
of purchase within the stated warranty period, and if covered under this warranty, will be repaired or
replaced (with the same model, or one of equal value or specification) at our option. We will bear the
cost of any repair or replacement and any costs of labour relating thereto.
These warranties are subject to the following conditions and
limitations:
a) a bill of sale verifying the purchase and the purchase date must be provided;
b) this warranty will not apply to any product or part thereof that is worn or broken or that has
become inoperative due to abuse, misuse, accidental damage, neglect or lack of proper installation,
operation or maintenance (as outlined in the applicable owner’s manual or operating instructions),
or that is being used for industrial, professional, commercial or rental purposes;
c) this warranty will not apply to normal wear and tear or to expendable parts or accessories that
may be supplied with the product and that are expected to become inoperative or unusable after a
reasonable period of use;
d) this warranty will not apply to routine maintenance and consumable items, including but not limited
to fuel, lubricants, vacuum bags, blades, belts, sandpaper, bits, fluids, tune-ups or adjustments;
e) this warranty will not apply where damage is caused by repairs made or attempted by others (i.e.
persons not authorized by the manufacturer);
20V max* LITHIUM-ION BATTERY CHARGER - 054-3126-6
WARRANTY
16
WARRANTY
17
f) this warranty will not apply to any product that was sold to the original purchaser as a
reconditioned or refurbished product (unless otherwise specified in writing);
g) this warranty will not apply to any product or part thereof if any part from another manufacturer
is installed therein or any repairs or alterations have been made or attempted by unauthorized
persons;
h) this warranty will not apply to normal deterioration of the exterior finish, including but not limited
to scratches, dents, paint chips, or to any corrosion or discolouring caused by heat, abrasive and
chemical cleaners; and
i) this warranty will not apply to component parts sold by and identified as the product of another
company, which shall be covered under the product manufacturer’s warranty, if any.
Additional Limitations
This warranty applies only to the original purchaser and cannot be transferred. Neither the retailer nor
the manufacturer shall be liable for any other expense, loss or damage, including but not limited to any
indirect, incidental, consequential or exemplary damages arising in connection with the sale, use or
inability to use this product.
Notice to the Consumer
This warranty gives you specific legal rights, and you may have other rights, which may vary from province to
province. The provisions contained in this warranty are not intended to limit, modify, take away from, disclaim
or exclude any statutory warranties set forth in any applicable provincial or federal legislation.
IMPORTED BY MASTERCRAFT CANADA TORONTO, CANADA M4S 2B8
20V max* LITHIUM-ION BATTERY CHARGER - 054-3126-6
INSTRUCTION MANUAL
20V max* LITHIUM-ION
CORDLESS IMPACT DRIVER
054-3175-8
If any parts are
missing or damaged,
or if you have any
questions, please call
our toll-free helpline
at 1-800-689-9928.
Read and understand this instruction manual
thoroughly before using the product. It contains
important information for your safety as well as
operating and maintenance advice.
Keep this instruction manual for future use. Should
this product be passed on to a third party, then this
instruction manual must be included.
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
3
SAFETY GUIDELINES 4–8
DESCRIPTION9
OPERATING INSTRUCTIONS 10–14
MAINTENANCE 15
TROUBLESHOOTING 16
PARTS LIST 17–18
WARRANTY 19–20
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
TABLE OF CONTENTS
TECHNICAL SPECIFICATIONS 2
TECHNICAL SPECIFICATIONS
3
MOTOR
20V DC
NO-LOAD SPEED
0–2500 RPM
IMPACT RATE
0–3200 BPM
COLLET CAPACITY
Hex 1/4" (6.35 mm)
MAX. TORQUE
1400 in-lb
TOOL WEIGHT (WITHOUT BATTERY)
2 lb 12 oz (1.22 kg)
BATTERY TYPE
Lithium-Ion
BATTERY VOLTAGE
20V max* DC
CHARGE INPUT
120V, 60 Hz AC only
OPTIMUM CHARGING TEMPERATURE 0–40°C (32–104°F)
*Maximum battery voltage without workload; with workload nominal voltage is 18V.
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
Safety symbols in this Instruction Manual are used to flag possible dangers. The safety
symbols and their explanations require your full understanding. The safety warnings do
not, by themselves, eliminate any danger, nor are they substitutes for proper accident
prevention measures.
WARNING!
This Safety Alert Symbol indicates caution, warning, or danger. Failure to obey a safety
warning can result in serious injury to yourself or others. To reduce the risk of injury, fire, or
electric shock, always follow the safety precautions.
Know your tool
To operate this tool, carefully read this Instruction Manual and all labels affixed to the Cordless Impact
Driver before using. Keep this manual available for future reference.
Important
This tool should only be serviced by a qualified service technician. For more information, call the
toll-free helpline at 1-800-689-9928.
Read all instructions thoroughly
Save these instructions
General power tool safety warnings
WARNING!
Read all safety warnings and instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or batteryoperated (cordless) power tool.
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
SAFETY GUIDELINES
WARNING!
4
5
Work area safety
SAFETY GUIDELINES
• Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks, which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
Electrical safety
• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a ground-fault circuit
interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
Personal safety
• Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not use the tool while tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or hearing protection, used for appropriate conditions,
will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting
to power source and/or battery pack, picking up or carrying the tool. Carrying power tools
with your finger on the switch or energising power tools that have the switch on invites accidents.
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
• Do not overreach. Keep proper footing and balance at all times. This enables better control of
the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure
that these are connected and properly used. Use of these devices can reduce dust-related hazards.
Power tool use and care
• Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and more safely at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories, tool bits, etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
Battery tool use and care
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
SAFETY GUIDELINES
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool may result in personal injury.
6
SAFETY GUIDELINES
7
• When battery pack is not in use, keep it away from other metal objects like paper clips,
coins, keys, nails, screws or other small metal objects that can make a connection from
one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, also seek medical
help. Liquid ejected from the battery may cause irritation or burns.
Service
• Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Safety guidelines for cordless impact driver
• To reduce the risk of electric shock or damage to the charger and battery, use only the
batteries and charger listed.
Battery pack
Charger
054-3124-0054-3126-6
054-3125-8
• Hold power tools by insulated gripping surfaces when performing an operation where the
tool may contact hidden wiring or its own cord. Contact with a “live” wire may make exposed
metal parts of the power tool “live” and could give the operator an electric shock.
• The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ..................... Volts
A ..................... Amperes
Hz ................... Hertz
W .................... Watts
min ................. Minutes
............... Alternating current
............. Direct current
n0 ................... No-load speed
............... Class II Construction
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
…/min ........... Revolutions per minute
............... Grounding terminal
BPM ............... Beats per minute
.............. WARNING – To reduce the risk of injury, user must read instruction manual.
• Secure the workpiece. Clamping devices or a vise will hold the workpiece in place better than the hand.
• Always wait until the tool has come to a complete stop before placing it down. The tool insert
can jam, which can lead to loss of control.
• Always set the rotational direction switch to centre position before performing any kind of
work on the machine (e.g., maintenance, tool change, etc.) and when transporting and storing
it. Unintentional activation of the On/Off switch may result in personal injury.
• Wear ear protectors when using the impact driver. Exposure to noise can cause hearing loss.
• Use protective gloves when removing the bit from the tool, or allow the clamp to cool down
first. The bit may be hot after prolonged use.
• Use protective gloves when operating the tool. Protective gloves can help to keep you from being
burnt and hurt.
• Keep your hands away from the motor housing vents. Hot gas comes from the vents during
operation.
• Release the trigger immediately when the screw is tightened to avoid breaking the screw.
Contents:
Cordless impact driver, 2 single ended bits, nylon tote and instruction manual.
WARNING!
Remove the cordless impact driver from the package and examine it carefully. Do not
discard the carton or any packaging material until all parts have been examined.
WARNING!
If any part of the impact driver is missing or damaged, do not attach the battery pack to
the tool or use the tool until the part has been repaired or replaced. Failure to heed this
warning could result in serious injury.
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
SAFETY GUIDELINES
8
Know your tool
6
DESCRIPTION
9
1
3
2
4
5
No.Description
1Sleeve
2
Variable-speed Trigger Switch
3
Direction-of-rotation Selector
No.Description
4LED Worklight
5
Bit Clip
6
Forward/reverse LED indicator
Before attempting to use this tool, become familiar with all of its operating features and safety
requirements. For optimum performance and safety, read the following operating instructions carefully
before using.
WARNING!
Do not allow familiarity with the Cordless impact driver to cause a lack of alertness. A
fraction of a second of carelessness is enough to cause severe injury.
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
WARNING!
fig 1
To avoid the possibility of accidental
starting, always take care not to
activate the trigger switch when you are
attaching the battery pack or performing
other adjustments to the tool.
1.Lock the trigger switch on the impact driver
by placing the direction-of-rotation selector
(forward/centre lock/reverse) in the centre position.
Attach
Detach
2.Align the raised rib on the battery pack with the grooves of the impact driver, and then attach the
battery pack to the impact driver.
3.Make sure that the latch on the battery pack snaps into place, and that the battery pack is attached
securely to the tool before beginning operation.
NOTICE: When placing a battery pack on the tool, be sure that the raised rib on the battery pack
aligns with the groove on the cordless impact driver and the latches snap into place properly. Improper
assembly of the battery pack can cause damage to internal components.
To detach the battery pack (fig 1)
1.Lock the trigger switch on the impact driver by placing the direction-of-rotation selector (forward/
centre lock/reverse) in the centre position.
2.Depress the battery-release button located on the front of the battery pack to release the battery
pack.
3.Pull the battery pack out and remove it from the tool.
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
OPERATING INSTRUCTIONS
To attach the battery pack (fig 1)
10
OPERATING INSTRUCTIONS
11
Trigger switch (fig 2)
1.To turn the impact driver ON, depress the trigger
switch.
fig 2
VariableSpeed
Trigger
Switch
2.To turn it OFF, release the trigger switch.
Variable speed (fig 2)
The variable-speed trigger switch delivers higher
speed with increased trigger pressure and lower
speed with decreased trigger pressure.
Direction-of-rotation selector
(forward/centre lock/reverse)
(fig 2-4)
Directionof-Rotation
Selector
fig 3
The direction of bit rotation is reversible, and is
controlled by a selector located above the trigger
switch. With the impact driver held in normal
operating position:
Position the direction-of-rotation selector to the
left of the tool for forward rotation. The forward/
reverse LED indicator on the impact driver will
shine green (fig 4).
Forward
Reverse
fig 4
Position the direction-of-rotation selector to the
right of the tool for reverse rotation. The forward/
reverse LED indicator on the impact driver will
shine red (fig 4).
Position the switch in the OFF (centre lock)
position helps reduce the possibility of accidental
starting when not in use.
Green
Red
NOTICE: To prevent gear damage, always allow the impact driver to come to a complete stop before
changing the direction of rotation.
NOTICE: The impact driver will not run unless the direction-of-rotation selector is engaged fully to the
left or right.
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
Electric brake
To stop the impact driver, release the trigger switch and allow the tool to come to a complete stop.
The electric brake quickly stops the rotation. This feature engages automatically when you release the
trigger switch.
LED worklight (fig 5)
fig 5
LED Worklight
The LED worklight, located on the base of the
impact driver, will illuminate when the trigger
switch is depressed. The LED worklight will turn
off when the trigger switch is released.
Bit storage (fig 6)
When not in use, a bit may be stored on either side
of the cordless impact driver by snapping it into
place in the bit clip.
fig 6
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
Bits clip
OPERATING INSTRUCTIONS
12
OPERATING INSTRUCTIONS
13
Installing a driver bit or socket
bit (fig 7)
fig 7
1.Lock the trigger switch by placing the directionof-rotation selector in the OFF (centre) position.
2.With one hand, pull the sleeve toward the front
of the tool, and hold it in place.
3.With the other hand, insert the 1/4" (6.35 mm)
bit into the hexagonal hole in the bit retainer.
4.Release the sleeve, and verify that it returns to
its original position.
WARNING!
If the sleeve does not return to its original position, the bit is not correctly installed. Retry
until the bit is properly installed.
WARNING!
Only use sockets designed for impact drivers. Sockets not designed for impact drivers
could break and result in user injury. Inspect sockets prior to use to ensure that they have
no cracks or other visible damage.
Removing a driver bit or socket bit (fig 7)
1.Lock the trigger switch by placing the direction-of rotation selector in the OFF (centre) position.
2.Pull the sleeve toward the front of the tool, and hold it in place.
3.Remove the bit from the hexagonal hole in the bit retainer.
4.Release the sleeve.
WARNING!
Use protective gloves when removing the bit from the tool, or allow the bit to cool down
first. The bit may be hot after prolonged use.
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
1.Install the correct bit.
fig 8
2.Apply just enough pressure to keep the bit
engaged on the screw or nut.
3.Position the direction-of-rotation selector to the
left of the tool for forward rotation.
4.Apply minimal pressure to the trigger switch
initially. Increase the speed only when full
control can be maintained.
WARNING!
Do not over-tighten, because the force of the impact driver can break the fastener. Keep
the impact driver pointed straight at the fastener to avoid damaging the fastener head.
NOTICE: Before starting your job, always perform a test operation to determine the proper fastening time.
Loosening screws and nuts (fig 9)
1.Install the correct bit.
fig 9
2.Apply just enough pressure to keep the bit
engaged on the screw or nut.
3.Position the direction-of-rotation selector to the
right of the tool for reverse rotation.
4.Apply minimal pressure to the trigger switch
initially. Increase the speed only when full
control can be maintained.
Tightening torque
The fastening torque is affected by a wide variety of factors including the following. After fastening,
always check the torque with a torque wrench.
• Voltage: Low voltage, due to a nearly discharged battery, will reduce fastening torque.
• Socket size: Failure to use the correct socket size will cause a reduction in fastening torque.
• Bolt Size: Larger bolt diameters generally require higher fastening torque. Fastening torque will also
vary according to length, grade, and torque coefficient.
• Bolt: Ensure that all threads are free of rust and other debris to allow proper fastening torque.
• Material: The type of material and surface finish of the material will affect fastening torque.
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
OPERATING INSTRUCTIONS
Tightening screws or nuts (fig 8)
14
15
Before each use
MAINTENANCE
1.Inspect the cordless impact driver, the trigger switch, and the battery pack for damage.
2.Check for damaged, missing, or worn parts.
3.Check for loose screws, misalignment or binding of moving parts, or any other condition that may
affect the operation.
4.If abnormal vibration or noise occurs, turn the tool off immediately and have the problem corrected
before further use. Remove the battery from the power tool before cleaning or performing any
maintenance. Using compressed air may be the most effective cleaning method. Always wear safety
goggles when cleaning tools using compressed air.
WARNING!
Do not allow brake fluids, gasoline, petroleum-based products, penetrating oil, etc. come
into contact with plastic parts. These substances contain chemicals that can damage,
weaken, or destroy plastic.
WARNING!
When servicing, use only identical replacement parts. The use of any other parts may
create a hazard or cause damage to the product.
WARNING!
Use only accessories that are recommended for this cordless impact driver by the
manufacturer. Accessories that may be suitable for one tool may become hazardous when
used with another tool.
WARNING!
To ensure safety and reliability, all repairs should be performed by a qualified service
technician.
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
PROBLEM
POSSIBLE CAUSES
SOLUTIONS
The impact driver does
not work
The battery is depleted
Charge the battery
The bit cannot be
installed
The sleeve is not released
Release the sleeve
The bit does not fit the sleeve
Use a suitable bit
The motor overheats
Be sure the cooling vents are free
of dust and obstacles
Clean and clear vents. Do not
cover with hand during operation
WARNING!
Turn the trigger switch to the “OFF” (centre) position and remove the battery from the
power tool before performing troubleshooting procedures.
If the problem remains unsolved after performing the checks described above, call the tollfree helpline at 1-800-689-9928.
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
TROUBLESHOOTING
16
Exploded view
PARTS LIST
17
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
No. Part No.
Description
23 3126562000 Rear Gear Housing
24
5690007000O Ring
25
5620037000Screw
26
5650007000Spring Washer
27
3703951000Bracket
28
3520658000Pinion
29
2730195000DC Motor
30 3126503000 Lens
31
4890709000PCB Assembly
32 3321620000 Left Housing Assembly
33 3680140000 Magnet Ring
343126501000 F/R Button
35 4870452000 Trigger Switch
363402385000 Contact Receptacle Assembly
374360225000 LED
38 3126500000 LED Cover
39 4860003000 Inner Wire
404920154000 Shrinkable Tube
414920158000 Shrinkable Tube
42 3321616000 Right Housing Assembly
43 5610013000 Tapping Screw
44 3703673000 Bits Holder
If any parts are missing or damaged, or if you have any questions,
please call the Toll-free Helpline, at 1-800-689-9928.
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
PARTS LIST
No. Part No.
Description
1 5660035000 Circlips For Shaft
25650192000Washer
35700178000Steel Ball
43660177000Spring
53550606000Bushing
65610106000Tapping Screw
73126543000Cover
8 3421381000 Front Gear Housing
93551807000Spindle
10 5700226000 Steel Ball
11 3551809000 Impact Block
125650430000 Washer
13 3660528000 Compression Spring
145690274000 Rubber Ring
155650163000 Spring Washer
16 3520657000 Planet Gear 17 5670319000 Torque Pin 183551808000 Spindle 195650429000 Washer 20 3520656000 Ring Gear 21 5690142000 O Ring
22 5700179000 Bearing 18
WARRANTY
19
This Mastercraft product is guaranteed three (3) years from the date of original retail purchase
against defects in materials and workmanship, except for the following components:
a)Component A: Batteries, chargers and carrying case, which are guaranteed for a period of 2 years
from the date of original retail purchase against defects in workmanship and materials;
b)Component B: Accessories, which are guaranteed for a period of 1-year from the date of original
retail purchase against defects in workmanship and materials.
Subject to the conditions and limitations described below, this product, if returned to us with proof
of purchase within the stated warranty period and if covered under this warranty, will be repaired or
replaced (with the same model, or one of equal value or specification), at our option. We will bear the
cost of any repair or replacement and any costs of labour relating thereto.
These warranties are subject to the following conditions and
limitations:
a)a bill of sale verifying the purchase and purchase date must be provided;
b)this warranty will not apply to any product or part thereof which is worn or broken or which has
become inoperative due to abuse, misuse, accidental damage, neglect or lack of proper installation,
operation or maintenance (as outlined in the applicable owner’s manual or operating instructions) or
which is being used for industrial, professional, commercial or rental purposes;
c)this warranty will not apply to normal wear and tear or to expendable parts or accessories that
may be supplied with the product which are expected to become inoperative or unusable after a
reasonable period of use;
d)this warranty will not apply to routine maintenance and consumable items such as, but not limited to,
fuel, lubricants, vacuum bags, blades, belts, sandpaper, bits, fluids, tune-ups or adjustments;
e)this warranty will not apply where damage is caused by repairs made or attempted by others (i.e.
persons not authorized by the manufacturer);
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
g)this warranty will not apply to any product or part thereof if any part from another manufacturer is
installed therein or any repairs or alterations have been made or attempted by unauthorized persons;
h)this warranty will not apply to normal deterioration of the exterior finish, such as, but not limited
to, scratches, dents, paint chips, or to any corrosion or discolouring by heat, abrasive and chemical
cleaners; and
i) this warranty will not apply to component parts sold by and identified as the product of another
company, which shall be covered under the product manufacturer’s warranty, if any.
Additional limitations
This warranty applies only to the original purchaser and may not be transferred. Neither the retailer
nor the manufacturer shall be liable for any other expense, loss or damage, including, without
limitation, any indirect, incidental, consequential or exemplary damages arising in connection with the
sale, use or inability to use this product.
Notice to consumer
This warranty gives you specific legal rights, and you may have other rights, which may vary from province to
province. The provisions contained in this warranty are not intended to limit, modify, take away from, disclaim
or exclude any statutory warranties set forth in any applicable provincial or federal legislation.
IMPORTED BY MASTERCRAFT CANADA TORONTO, CANADA M4S 2B8
20V max* LITHIUM-ION CORDLESS IMPACT DRIVER - 054-3175-8
WARRANTY
f) this warranty will not apply to any product that was sold to the original purchaser as a reconditioned
or refurbished product (unless otherwise specified in writing);
20
INSTRUCTION MANUAL
20V max* (1.5 AH) LITHIUM-ION
RECHARGEABLE BATTERY
054-3124-0
If any parts are
missing or damaged,
or if you have any
questions, please call
our toll-free helpline
at 1-800-689-9928.
Read and understand this instruction manual
thoroughly before using the product. It contains
important information for your safety as well as
operating and maintenance advice.
Keep this instruction manual for future use. Should
this product be passed on to a third party, then this
instruction manual must be included.
20V max* LITHIUM-ION 1.3 AH RECHARGEABLE BATTERY - 054-3124-0
3
SAFETY GUIDELINES 4–6
DESCRIPTION7
OPERATING INSTRUCTIONS 8–10
MAINTENANCE 11–12
PARTS LIST 13
WARRANTY 14–15
20V max* LITHIUM-ION 1.5 AH RECHARGEABLE BATTERY - 054-3124-0
TABLE OF CONTENTS
TECHNICAL SPECIFICATIONS 2
TECHNICAL SPECIFICATIONS
3
BATTERY TYPE
Lithium-lon
BATTERY PACK VOLTAGE
20V max* DC
CAPACITY
1.5 Ah
CHARGE TIME
60 min.
BATTERY PACK WEIGHT
15 oz (0.43 kg)
BATTERY CHARGER054-3126-6
5331
*Maximum battery voltage without workload; with workload nominal voltage is 18V.
20V max* LITHIUM-ION 1.5 AH RECHARGEABLE BATTERY - 054-3124-0
Know your tool
To operate this tool, carefully read this Instruction Manual and all labels affixed to the battery pack
before using. Keep this Instruction Manual available for future reference.
Important
This tool should only be serviced by a qualified service technician. For more information, call the
toll-free helpline, at 1-800-689-9928.
Read all instructions thoroughly
Safety guidelines for power tools
WARNING!
Read all safety warnings and all instructions. Failure to follow all warnings and
instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains operated (corded) power tool or battery
operated (cordless) power tool.
Work Area Safety
• Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
20V max* LITHIUM-ION 1.5 AH RECHARGEABLE BATTERY - 054-3124-0
SAFETY GUIDELINES
Rules for safe operation
4
SAFETY GUIDELINES
5
Electrical Safety
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
Battery Tool Use And Care
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
• When the battery pack is not in use, keep it away from other metal objects, like paper
clips, coins, keys, nails, screws or other small metal objects that can make a connection
from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, also seek medical help. Liquid ejected
from the battery may cause irritation or burns.
Service
• Have your battery pack serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
20V max* LITHIUM-ION 1.5 AH RECHARGEABLE BATTERY - 054-3124-0
USE THIS BATTERY PACK ONLY WITH THE CHARGER LISTED.
BATTERY PACK
CHARGER
054-3124-0054-3126-6/5331
• Know your power tool. Read the Instruction Manual carefully. Learn the tool’s applications and
limitations, as well as the specific potential hazards related to this tool. Following this rule will reduce
the risk of electric shock, fire, or serious injury.
• Do not place the battery near fire or heat. This will reduce the risk of explosion and possible injury.
• Do not crush, drop or damage the battery pack. Do not use a battery pack or charger that has
been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose
of a dropped or damaged battery immediately.
• Batteries vent hydrogen gas and can explode in the presence of a source of ignition, such
as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the
presence of an open flame. An exploded battery can propel debris and chemicals. If exposed, flush
with water immediately.
• Do not charge the battery pack in a damp or wet location. Following this rule will reduce the
risk of electric shock.
• For best results, your battery pack should be charged in a location where the temperature is
more than 0°C (32°F) but less that 40°C (104°F). Do not store the battery pack outside or in vehicles.
• Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes
in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or
vinegar. If liquid gets in your eyes, flush them with clean water for at least 10 minutes, and then seek
immediate medical attention. Following this rule will reduce the risk of serious personal injury.
• Do not let gasoline, oils, petroleum-based products, etc. come in contact with plastic
parts. They contain chemicals that can damage, weaken or destroy plastic.
• Have your battery pack serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the battery pack is maintained.
• Save these instructions. Refer to them frequently and use them to instruct others who may use
this tool. If you lend someone this tool, lend them these instructions also to prevent misuse of the
product and possible injury.
20V max* LITHIUM-ION 1.5 AH RECHARGEABLE BATTERY - 054-3124-0
SAFETY GUIDELINES
Specific safety guidelines for battery pack
6
DESCRIPTION
7
Know your lithium-ion rechargeable battery
1
2
3
No.Description
1
Electrical Contacts
2
Battery-Release Button
No.Description
3
Fuel Gauge
Before using this product, familiarize yourself with all operating features and safety rules.
20V max* LITHIUM-ION 1.5 AH RECHARGEABLE BATTERY - 054-3124-0
Fuel gauge
80-100% Charge
60-79% Charge
40-59% Charge
20-39% Charge
Under 20% Charge
Completely Discharged
This Lithium-Ion battery pack is equipped with a Fuel Gauge, which displays the remaining charge of
the battery pack. Press the Fuel Gauge button to display the LED lights. The LED lights will stay lit for
approximately 4 seconds.
NOTE: The Fuel Gauge can be used when the battery pack is attached to or removed from the tool.
Low capacity warning
If one LED on the Fuel Gauge begins to flash, the battery pack’s charge is under 20% capacity and
should be recharged.
Unlike other battery types, Lithium-Ion batteries deliver fade-free power for their entire run time. The
tool will not experience a slow, gradual loss of power as you work. To signal that the battery pack is at
the end of its run time and needs to be charged, power to the tool will drop quickly. The Fuel Gauge will
begin to display four flashing LED lights when it is completely discharged. When this happens, remove
the tool from the work piece, remove the battery pack and charge the battery pack as needed.
20V max* LITHIUM-ION 1.5 AH RECHARGEABLE BATTERY - 054-3124-0
OPERATING INSTRUCTIONS
8
OPERATING INSTRUCTIONS
9
Battery protection
To protect the battery pack from damage and prolong its life, the battery pack’s circuitry will turn off
the battery pack if it becomes overloaded or if the temperature becomes too high during use. This may
happen in extremely high torque, binding and stalling situations. The battery pack will begin normal
operation when it cools down.
The Fuel Gauge will display four flashing LED lights if the circuitry detects a momentary overload.
You can conveniently reset the battery pack by releasing the power tool trigger switch. Press the Fuel
Gauge button again to display the remaining charge.
NOTE: If the Fuel Gauge continues to flash four LED lights after reset, place the battery pack on the
charger to evaluate the battery pack condition.
NOTE: A significantly reduced run time after fully charging the battery pack indicates that the battery
pack is near the end of its usable life and must be replaced.
Cold weather operation
When the battery pack is very cold, it may “pulse” for the first minute of use to warm itself. Put the
battery pack on a tool and use the tool in a light application. After about a minute, the battery pack will
have warmed itself and will operate normally.
When to charge the battery pack
NOTE: This Lithium-Ion battery pack is shipped partially charged. Before using it the first time, fully
charge the battery pack.
The Lithium-Ion battery pack can be charged at any time and will not develop a “memory” when
charged after only a partial discharge. It is not necessary to run down the battery pack charge before
recharging. Remove the battery pack from the tool when it is convenient for you and your job.
1.Use the Fuel Gauge to determine when you need to recharge the battery pack.
2.You can “top-off” your battery pack’s charge before starting a big job or long period of use.
3.Due to Lithium-Ion’s fade-free properties, the only time it is necessary to charge the Lithium-Ion
battery pack is when the pack has reached the end of its charge. To signal the end of charge, power
to the tool will drop quickly. Charge the battery pack as needed.
20V max* LITHIUM-ION 1.5 AH RECHARGEABLE BATTERY - 054-3124-0
How to charge the battery pack
NOTE: This Lithium-Ion battery pack is shipped partially charged. Before using it the first time, fully
charge the battery pack.
A fully discharged battery pack will charge about 60 minutes in a surrounding temperature between
0°C (32° F) and 40°C (104° F).
1.Charge the Lithium-Ion battery pack with the correct charger (Mastercraft 054-3126-6, 5331).
2.Connect the charger to a power supply.
3.Attach the battery pack to the charger by
aligning the raised ribs of the battery pack with
the slot in the charger. Slide the battery pack
onto the charger (fig 1).
fig 1
4.The charger will communicate with the battery
pack’s circuitry to evaluate the condition of the
battery pack.
5.The Fuel Gauge LED lights will cycle from right
to left during charging. This is part of the normal
charging operation.
6.After charging is complete, the green LED on the charger will be on and the Fuel Gauge LED lights
will turn off. The Fuel Gauge LED lights will not be displayed when the Fuel Gauge button is pressed
while the battery pack is on the charger.
7.The battery pack will fully charge, but will not overcharge, if left on the charger.
20V max* LITHIUM-ION 1.5 AH RECHARGEABLE BATTERY - 054-3124-0
OPERATING INSTRUCTIONS
10
MAINTENANCE
11
WARNING!
To ensure safety and reliability, all repairs should be performed by a qualified service
technician.
WARNING!
When servicing, use only identical replacement parts. The use of any other parts may
create a hazard or cause damage to the product.
WARNING!
To avoid serious personal injury, always remove the battery pack from the tool when
cleaning or performing any maintenance.
WARNING!
Always wear safety goggles or safety glasses with side shields when using compressed air
to clean the tool. If the operation is dusty, also wear a dust mask.
Batteries:
The battery pack is equipped with Lithium-Ion rechargeable batteries. The duration of use from each
charge will depend on the type of work performed.
This battery pack has been designed to provide maximum trouble-free life. Like all batteries, they will
eventually wear out. Do not disassemble the battery pack or attempt to replace the batteries. Handling
of the batteries, especially when wearing rings and jewelry could result in a serious burn.
• To obtain the longest possible battery life, read and understand the Instruction Manual.
• It is good practice to unplug the charger and remove the Lithium-Ion battery pack when not in use.
FOR LITHIUM-ION BATTERY PACK STORAGE LONGER THAN 30 DAYS:
• Store the Lithium-Ion battery pack where the temperature is below 26°C (80°F) and free of moisture.
• Store Lithium-Ion battery packs in a 30%-50% charged condition.
• Every six months of storage, fully charge the Lithium-Ion battery pack.
• Exterior may be cleaned with a cloth or soft non-metallic brush.
Please see page 8 for disposal instructions.
20V max* LITHIUM-ION 1.5 AH RECHARGEABLE BATTERY - 054-3124-0
To preserve natural resources, please recycle or dispose of batteries
properly. This product contains lithium-ion batteries. Provincial or municipal
laws may prohibit disposal of Lithium-Ion batteries in ordinary trash.
Consult your local waste authority for information regarding available
recycling and/or disposal options.
WARNING!
pon removal of the battery pack for disposal or recycling, cover the battery pack’s
U
terminals with heavy-duty adhesive tape. Do not attempt to destroy or disassemble the
battery pack or remove any of its components. Lithium-Ion batteries must be recycled or
disposed of properly. Also, never touch both terminals with metal objects and/or body parts,
as short circuit may result. Keep away from children. Failure to comply with these warnings
could result in fire and/or serious injury.
20V max* LITHIUM-ION 1.5 AH RECHARGEABLE BATTERY - 054-3124-0
MAINTENANCE
Battery pack removal and preparation for
recycling
12
Exploded view
PARTS LIST
13
No. Part No.
01 2770231000
02 3121038000
033126204000
04 3126465000
05 3126466000
063126467000
Description
Battery Assembly
Rubber Stick
Plate
Power Pack Cover
Power Pack Housing
Battery-Release Button
No. Part No.
07 3126468000
08 3660522000
093704001000
10 4870487000
11 5610010000
125610241000
Description
Power Indicator Cover
Compression Spring
Dust Cover
Film Switch
Tapping Screw
Screw
If any parts are missing or damaged, or if you have any questions,
please call the Toll-free Helpline, at 1-800-689-9928.
20V max* LITHIUM-ION 1.5 AH RECHARGEABLE BATTERY - 054-3124-0
This Mastercraft product is guaranteed two (2) years from the date of original retail purchase
against defects in materials and workmanship.
Subject to the conditions and limitations described below, this product, if returned to us with proof
of purchase within the stated warranty period, and if covered under this warranty, will be repaired or
replaced (with the same model, or one of equal value or specification), at our option. We will bear the
cost of any repair or replacement and any costs of labour relating thereto.
These warranties are subject to the following conditions and
limitations:
a)A bill of sale verifying the purchase and purchase date must be provided;
b)This warranty will not apply to any product or part thereof that is worn or broken or that has become
inoperative due to abuse, misuse, accidental damage, neglect or lack of proper installation, operation
or maintenance (as outlined in the applicable Instruction Manual or operating instructions) or that is
being used for industrial, professional, commercial or rental purposes;
c)This warranty will not apply to normal wear and tear or to expendable parts or accessories that may
be supplied with the product that are expected to become inoperative or unusable after a reasonable
period of use;
d)This warranty will not apply to routine maintenance and consumable items, including but not limited
to fuel, lubricants, vacuum bags, blades, belts, sandpaper, bits, fluids, tune-ups or adjustments;
e)This warranty will not apply where damage is caused by repairs made or attempted by others (i.e.,
persons not authorized by the manufacturer);
f) This warranty will not apply to any product that was sold to the original purchaser as a reconditioned
or refurbished product (unless otherwise specified in writing);
g)This warranty will not apply to any product or part thereof if any part from another manufacturer is
installed therein or any repairs or alterations have been made or attempted by unauthorized persons;
20V max* LITHIUM-ION 1.5 AH RECHARGEABLE BATTERY - 054-3124-0
WARRANTY
14
WARRANTY
15
h)This warranty will not apply to normal deterioration of the exterior finish, including but not limited to
scratches, dents, paint chips, or to any corrosion or discolouring by heat, abrasive and chemical cleaners;
i) This warranty will not apply to component parts sold by and identified as the product of another
company, which shall be covered under the product manufacturer’s warranty.
Additional limitations
This warranty applies only to the original purchaser and may not be transferred. Neither the retailer nor
the manufacturer shall be liable for any other expense, loss or damage, including, without limitation,
any indirect, incidental, consequential or exemplary damages arising in connection with the sale, use or
inability to use this product.
Notice to Consumer
This warranty gives you specific legal rights, and you may have other rights, which may vary from province to
province. The provisions contained in this warranty are not intended to limit, modify, take away from, disclaim
or exclude any statutory warranties set forth in any applicable provincial or federal legislation.
IMPORTED BY MASTERCRAFT CANADA TORONTO, CANADA M4S 2B8
20V max* LITHIUM-ION 1.5 AH RECHARGEABLE BATTERY - 054-3124-0
INSTRUCTION MANUAL
20V max* LITHIUM-ION
CORDLESS DRILL/DRIVER
054-3118-6
If any parts are
missing or damaged,
or if you have any
questions, please call
our toll-free helpline
at 1-800-689-9928.
Read and understand this instruction manual
thoroughly before using the product. It contains
important information for your safety as well as
operating and maintenance advice.
Keep this instruction manual for future use. Should
this product be passed on to a third party, then this
instruction manual must be included.
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
3
SAFETY GUIDELINES 4–8
DESCRIPTION9
OPERATING INSTRUCTIONS
10–16
MAINTENANCE 17–18
TROUBLESHOOTING 19
PARTS LIST 20
WARRANTY 21–22
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
TABLE OF CONTENTS
TECHNICAL SPECIFICATIONS 2
TECHNICAL SPECIFICATIONS
3
MOTOR
20V DC
CHUCK
1/2" Keyless chuck
NO-LOAD SPEED 0–420 RPM
0–1500 RPM
MAX. TORQUE 330 in-lb
CLUTCH
23+1 Position
CORDLESS DRILL/DRIVER WEIGHT (WITHOUT BATTERY)
2 lb 10 oz (1.2 KG)
BATTERY TYPELithium-Ion
BATTERY VOLTAGE
20V max* DC
COMPATIBLE BATTERIES
1.5 Ah Li-ion (054-3124-0)
3.0 Ah Li-ion (054-3125-8)
BATTERY CHARGER
054-3126-6, 5331
*Maximum battery voltage without workload; with workload nominal voltage is 18V.
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
WARNING!
Safety symbols in this Instruction Manual are used to flag possible dangers. The safety
symbols and their explanations require your full understanding. The safety warnings do not,
by themselves, eliminate any danger, nor are they substitutes for proper accident prevention
measures.
WARNING!
This Safety Alert Symbol indicates caution, warning, or danger. Failure to obey a safety
warning can result in serious injury to yourself or others. To reduce the risk of injury, fire, or
electric shock, always follow the safety precautions.
Know your tool
To operate this tool, carefully read this Instruction Manual and all labels affixed to the Cordless Drill/Driver
before using. Keep this instruction manual available for future reference.
Important
This tool should only be serviced by a qualified service technician. For more information, call the toll-free
helpline at 1-800-689-9928.
READ ALL INSTRUCTIONS THOROUGHLY.
SAVE THESE INSTRUCTIONS.
Safety guidelines for cordless power tools
WARNING!
Read all safety warnings and instructions. Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury. Save all warnings and instructions for future
reference. The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
Work area safety
• Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks, which may ignite the dust or fumes.
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
SAFETY GUIDELINES
4
5
SAFETY GUIDELINES
• Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.
Electrical safety
• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep the
cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of
electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a ground-fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
Personal safety
• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not
use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while
operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection, used for appropriate conditions, will reduce
personal injuries.
• Prevent unintentional starting. Ensure that the switch is in the off-position before connecting to a
power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger
on the switch or plugging in power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power
tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure that
these are connected and properly used. Use of these devices can reduce dust-related hazards.
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
• Do not force the power tool. Use the correct power tool for your application. The correct power tool will
do the job better and more safely at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the hands
of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories, tool bits, etc., in accordance with these instructions, taking into
account the working conditions and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
Battery tool use and care
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated battery packs. The use of any other battery pack
may create a risk of injury and fire.
• When the battery pack is not in use, keep it away from other metal objects, such as paper clips,
coins, keys, nails, screws, or other small metal objects that can make a connection from one
terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery. Avoid contact. If contact occurs,
flush with water. If liquid comes into contact with the eyes, seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Service
• Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
SAFETY GUIDELINES
Power tool use and care
6
SAFETY GUIDELINES
7
Safety guidelines for cordless drill/driver
• Hold power tools by the insulated gripping surfaces when performing an operation where the tool
may contact hidden wiring or its own cord. Contact with a “live” wire may make exposed metal parts
of the power tool “live” and could give the operator an electric shock.
• When working with the power tool, always hold it firmly with both hands and provide for a secure
stance. The power tool is guided more securely with both hands.
• Keep the cord and charger from heat to prevent damage to the housing or internal parts.
• Secure the workpiece. Clamping devices or a vise will hold the workpiece in place more effectively
than your hand can.
• Do not allow gasoline, oils, petroleum-based products, etc., to come in contact with plastic parts.
These materials contain chemicals that can damage, weaken, or destroy plastic.
• Always wait until the machine has come to a complete stop before placing it down. The tool insert
can jam and lead to loss of control over the power tool.
• Before performing any kind of work on the machine (e.g., maintenance, tool change, etc.) or
when transporting and storing the tool, always set the direction-of-rotation switch to the centre
(locked) position. Unintentional activation of the On/Off switch may result in personal injury.
• Do not open the battery. There is a risk of a short circuit.
• Protect the battery from heat and fire. There is a risk of explosion.
• Wear ear protectors when using the drill/driver. Exposure to noise can cause hearing loss.
• Use protective gloves when removing the bit from the tool, or first allow the bit to cool down. The
bit may be hot after prolonged use.
• Use protective gloves when operating the tool. Protective gloves can help to keep you from being
burnt or injured.
• Keep your hands away from the motor-housing vents. Hot gas comes from the vents during
operation.
• Release the trigger immediately when a screw is tightened to avoid breaking the screw.
• For best results, your battery tool should be charged in a location where the temperature is more
than 0°C (32°F) but less that 40°C (104°F). Do not store outside or in vehicles.
Contents
Cordless Drill/Driver, 2 double-ended bits, and Instruction Manual
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
WARNING!
Remove the Cordless Drill/Driver from the package, and examine it carefully. Do not discard
the carton or any packaging material until all parts have been examined.
WARNING!
If any part of the Cordless Drill/Driver is missing or damaged, do not attach the battery pack
to the tool or use the tool until the part has been repaired or replaced. Failure to heed this
warning could result in serious injury.
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
SAFETY GUIDELINES
8
Know your cordless drill/driver
DESCRIPTION
9
2
1
7
8
3
6
5
4
No.Description
1
Two-speed gearbox switch
2
Forward/reverse LED indicator
3
Direction-of-rotation selector
4
Bit clip
No.Description
5
LED Worklight
6
Trigger switch
7
Torque-adjustment ring
8
Keyless chuck
WARNING!
Do not allow familiarity with the Cordless Drill/Driver to cause a lack of alertness. A fraction of a second of carelessness is enough to cause severe injury.
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
WARNING!
Carefully read the Instruction Manuals for your Mastercraft 20V max* Lithium-Ion Battery
(054-3124-0/054-3125-8) and Mastercraft 20V max* Lithium-Ion Charger (054-3126-6,
5320.3) for safety and operation instructions.
To attach battery pack (fig 1)
CAUTION!
Avoid the possibility of accidental
starting. Always take care not to
activate the trigger switch when you
are attaching the battery pack or
performing other adjustments to the
tool.
fig 1
Battery-release button
NOTE: When placing a battery pack on the tool, be sure that the raised rib on the battery pack aligns with
the groove on the cordless drill/driver and the latches snap into place properly. Improper assembly of the
battery pack can cause damage to internal components.
1.Lock the trigger switch on the drill/driver by placing the direction-of-rotation (forward/centre-lock/
reverse) selector in the centre position.
2.Align the raised portion on the battery pack with the groove on the bottom of the drill/driver, and then
attach the battery pack to the drill/driver as shown.
3.Make sure that the latch on the battery pack snaps into place and that the battery pack is secured to the
drill/driver before beginning operation.
To detach battery pack (fig 1)
CAUTION!
Avoid the possibility of accidental starting. Always take care not to activate the trigger switch when you are detaching the battery pack or performing other adjustments to the tool.
1.Lock the trigger switch on the drill/driver by placing the direction-of-rotation selector (forward/
centre-lock/reverse) in the centre position.
2.Depress the battery-release button located on the front of the battery pack to release the battery pack.
3.Pull forward on the battery pack to remove it from the drill/driver.
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
OPERATING INSTRUCTIONS
10
11
OPERATING INSTRUCTIONS
Trigger switch (fig 2)
To turn the drill/driver ON, depress the trigger
switch. To turn it OFF, release the trigger switch.
fig 2
Variable speed
trigger switch
Variable speed (fig 2)
The variable-speed trigger switch delivers higher
speed with increased trigger pressure and lower
speed with decreased trigger pressure.
Direction-of-rotation selector
(forward/centre-lock/reverse)
(fig 3-4)
Direction-of-rotation
selector
fig 3
The direction of rotation of the bit is reversible and
is controlled with a selector located above the
trigger switch. With the drill/driver held in normal
operating position:
Forward
Position the direction-of-rotation selector to the left
of the tool for forward rotation. The forward/reverse
LED indicator the drill/driver will shine green (fig 4).
Position the direction-of-rotation selector to the right
of the tool for reverse rotation. The forward/reverse
LED indicator on the drill/driver will shine red (fig 4).
fig 4
Position the direction-of-rotation selector in the
centre to lock the tool off.
NOTE: To prevent gear damage, always allow the
drill/driver to come to a complete stop before
changing the direction of rotation.
NOTE: The drill/driver will not run unless the
direction-of-rotation selector is engaged fully to
the left or right.
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
Reverse
The LED worklight, located on the base of the
cordless drill/driver, will illuminate when the trigger
switch is depressed. This provides additional light
on the surface of the workpiece for operation in
lower light situations. The LED worklight will turn
off when the trigger switch is released.
fig 5
LED Worklight
Electric brake
To stop the tool, release the trigger switch and
allow the chuck to come to a complete stop. The
electric brake quickly stops rotation. This feature
engages automatically when you release the trigger
switch.
Keyless chuck (fig 6)
The arrows on the chuck indicate the direction of
rotation of the body of the chuck to: GRIP (tighten)
or OPEN (release) the jaws of the chuck on the drill
bit.
Bit storage (fig 7)
When not in use, the bits may be stored on either
side of the cordless drill/driver by snapping the bit
into place in one of the bit clips.
fig 6
RELEASE
Keyless chuck
GRIP
fig 7
Bit clip
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
OPERATING INSTRUCTIONS
LED Worklight (fig 5)
12
13
OPERATING INSTRUCTIONS
Two-speed gear box (fig 8)
This drill/driver features a two-speed gearbox that
is designed for drilling or driving at LO speed or HI
speed. A slide switch is located on the top of the
cordless drill/driver to select either LO or HI speed.
fig 8
Slide switch
When using the cordless drill/driver in the LO speed
range, the speed will decrease and the cordless drill/
driver will have more power and torque.
When using the cordless drill/driver in the HI speed
range, the speed will increase and the cordless
drill/driver will have less power and torque.
Use LO speed for high power and torque
applications, and use HI speed for fast drilling
applications.
fig 9
Torque-adjustment ring
CAUTION!
Do not change between LO speed and
HI speed while the tool is running.
Failure to obey this caution could
result in serious damage to the
cordless drill/driver.
Arrow
Adjustable torque clutch (fig 9)
The torque clutch can be adjusted to any of 24 different settings (23 driving and 1 drilling). The higher the
torque setting, the more force the cordless drill/driver produces to turn an object in either LO or HI rotation
speed.
When using the cordless drill/driver for driving applications, it is necessary to increase or decrease the
torque to help prevent damage to screw heads, threads, and the workpiece. Adjust the torque by rotating
the torque-adjustment ring. The proper setting depends on the job and the type of bit, fastener, and material
you will be using.
In general, use greater torque for larger screws, but if the torque is too high, the screws may be damaged
or broken. For delicate operations, such as removing a partially stripped screw, use a low torque setting. For
operations such as drilling into hardwood, use a higher torque setting.
NOTE: Do not change the torque setting when the tool is running.
NOTE: When adjusting the torque ring, make sure that the speed switch is either completely in the LO or the
HI position.
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
1. Lock the trigger switch by placing the
direction-of-rotation selector in the OFF (centre)
position.
2. Rotate the chuck in the “OPEN” direction to
release the jaws of the chuck on the bit.
fig 10
RELEASE
Keyless chuck
3. Insert the drill bit.
GRIP
4. Rotate the chuck in the “GRIP” direction to tighten
the jaws of the chuck securely on the bit.
fig 11
WARNING!
Do not hold the body of the chuck with
one hand while using the power of the
drill/driver to tighten the jaws of the
chuck on the drill bit. The body of the
chuck could slip in your hand, or your
hand could slip and come into contact
with the rotating bit. This could cause
an accident and result in serious
personal injury.
WARNING!
Be sure to insert the drill bit straight into the jaws of the chuck. Do not tighten the jaws of the
chuck with the drill bit inserted at an angle, as shown in fig 11. Doing so could cause the drill
bit to be thrown from the drill/driver, which could result in possibly serious personal injury or
damage to the chuck.
Removing a bit (fig 10)
1. Lock the trigger switch by placing the direction-of rotation selector in the OFF (centre) position.
2. Open the jaws of the chuck (rotate in the “OPEN” direction.)
3. Remove the drill bit.
WARNING!
Use protective gloves when removing the bit from the tool, or first allow the bit to cool down.
The bit may be hot after prolonged use.
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
OPERATING INSTRUCTIONS
Installing a bit (fig 10)
14
OPERATING INSTRUCTIONS
15
General drilling (fig 12)
fig 12
WARNING!
Always wear safety goggles or safety
glasses with side shields during power
tool operation or when blowing dust.
If the operation is dusty, also wear a
dust mask.
1. Check the direction-of-rotation selector for the correct setting (forward or reverse).
2. Use a vise or clamps to secure the material to be drilled to keep it from turning as the drill bit rotates.
3. Hold the cordless drill/driver firmly, and place the bit at the point to be drilled.
4. Depress the trigger switch to start the cordless drill/driver.
5. Move the drill bit into the workpiece, applying only enough pressure to keep the bit cutting.
6. Do not force the cordless drill/driver or apply sideways pressure to elongate a hole. Allow the tool to do
the work.
7. When drilling hard, smooth surfaces, use a centre punch to mark the desired location of the hole. This will
prevent the drill bit from slipping off-centre when the hole is started.
8. When drilling metal, use light oil on the drill bit to prevent it from overheating. The oil will prolong the life
of the bit and will increase the drilling efficiency.
9. If the bit jams in the workpiece or if the drill/driver stalls, stop the tool immediately. Reverse the direction
of rotation and gently squeeze the trigger to remove the bit from the workpiece. Investigate and correct
the cause of jamming before resuming work.
WARNING!
Be prepared for binding when the bit breaks through the workpiece, because the drill/driver
has a tendency to grab and kick opposite to the direction of rotation, which could cause a loss
of control. If the operator is not prepared, this loss of control could result in serious injury.
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
FOR DRILLING IN WOOD, USE TWIST BITS, SPADE BITS, POWER AUGER BITS OR HOLE SAWS.
1. When drilling “through” holes, place a block of wood behind the workpiece to prevent ragged or
splintered edges on the back side of the hole.
2. Select the desired speed to match the planned operation.
3. Begin drilling at a very low speed to prevent the bit from slipping off of the starting point, and then
increase the speed as the drill bit bites into the material.
4. If the drill/driver stalls, it is usually because it is being overloaded. Release the trigger switch
immediately, remove the drill bit from the work, and determine the cause of stalling.
5. Keep the motor running when pulling the bit back out of the drilled hole. This will prevent jamming.
FOR DRILLING IN METAL, USE HIGH SPEED STEEL TWIST DRILL BITS.
1. Use light oil on the drill bit to keep it from overheating; the oil will prolong the life of the bit and increase
the drilling action.
2. When drilling a large hole, first use a smaller bit to drill a small pilot hole to prevent the larger bit from
slipping.
3. Select the desired speed to match the planned operation.
4. Begin drilling at a very low speed to prevent the bit from slipping off the starting point. Maintain a speed
and pressure which allows cutting without overheating the bit.
5. If the drill stalls, it is usually because it is being overloaded. Release the trigger switch immediately,
remove the drill bit from the work, and determine the cause of stalling.
6. Keep the motor running when pulling the bit back out of the drilled hole. This will prevent jamming.
Screwdriver operation
1. Select the desired speed/torque range to match the planned operation.
2. Attach the desired fastener accessory into the chuck.
3. Make a few practice runs in a scrap piece before working.
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
OPERATING INSTRUCTIONS
Drilling mode operation
16
17
MAINTENANCE
General maintenance
WARNING!
To avoid personal injury, always remove the battery pack from the tool when cleaning or
performing any maintenance.
WARNING!
Do not let brake fluids, gasoline, petroleum-based products, penetrating oil, etc. come into
contact with plastic parts. These substances contain chemicals that can damage, weaken, or
destroy plastic.
The tool may be cleaned most effectively with compressed dry air. Always wear safety
goggles when cleaning tools with compressed air.
Before each use:
• Inspect the cordless drill/driver, the trigger switch, and the cord for damage.
• Check for damaged, missing, or worn parts.
• Check for loose screws, misalignment or binding of moving parts, or any other condition
that may affect the operation.
• If abnormal vibration or noise occurs, turn the cordless drill/driver off immediately, and
have the problem corrected before further use.
WARNING!
When servicing, use only identical replacement parts. The use of any other parts may create a
hazard or cause damage to the product.
WARNING!
Use only accessories that are recommended for this drill/driver by the manufacturer. Accessories that may be suitable for one tool may become hazardous when used with another tool.
WARNING!
To ensure safety and reliability, all repairs should be performed by a qualified service
technician.
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
The chuck can be removed and replaced with a new
one.
fig 13
Mallet
Chuck jaws
1. Remove the battery.
2. Lock the trigger switch by placing the directionof-rotation selector in the centre position.
3. Open the chuck jaws. Using a screwdriver,
remove the chuck screw by turning it clockwise.
Hex wrench
4. Insert a 5/16-in. or larger hex key into the chuck
of the drill/driver and tighten the chuck jaws
securely.
5. Tap the hex key sharply with a mallet in a counter-clock wise direction. This will loosen the chuck for
easy removal.
6. Attach a new chuck to the spindle and tighten the chuck screw.
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
MAINTENANCE
Chuck removal (fig 13)
18
TROUBLESHOOTING
19
PROBLEM
POSSIBLE CAUSES
SOLUTIONS
The drill/driver does
not work.
The battery is depleted.
Charge the battery.
1. The chuck is not opened.
1. Open the chuck.
The bit cannot be
installed.
The motor is overheating.
2. The bit does not fit the chuck.
2. Use a suitable bit.
Be sure the cooling vents are free from dust
and obstacles.
Clean and clear the vents. Do not cover with
your hand during operation.
If the problem remains unsolved after performing the checks described above, call the t­oll‑free helpline at
1-800-689-9928.
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
20
PARTS LIST
Exploded view
No. Part No.
01 2790306000
02 2790307000
03 3126500000
04 3126501000
05 3126502000
063126503000
07 3126506000
08 3321410000
09 3321411000
10 3402385000
113660466000
12 3700961000
133703673000
14 3810357000
15 3810405000
Description
Gear Case Assembly
Motor And Gear Assembly
LED Cover F/R Button
Speed Change Button
Lens
Clutch Cap
Left Housing Assembly
Right Housing Assembly
Contact Receptacle Assembly
Compression Spring
Stop Spring
Bits Holder
Screw Bit
Screw Bits
No. Part No.
17 4120311001
184360225000
19 4860003000
20 4860007000
21 4870452000
22 4890709000
23 4920154000
24 4920156000
25 4920158000
26 5610013000
275620422000
28 5620488000
295650007000
30 5660142000
31 5700178000
Description
Lead Resistor
LED
Inner Wire
Inner Wire
Trigger Switch
PCB Assembly
Shrinkable Tube
Shrinkable Tube
Shrinkable Tube
Tapping Screw
Screw
Screw (L.H.)
Spring Washer
Circlips For Shaft-Type B
Steel Ball
163860112000 Chuck
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
WARRANTY
21
3
YEAR
LIMITED WARRANTY†
This Mastercraft product is guaranteed three (3) years from the
date of original retail purchase against defects in materials and
workmanship, except for the following components:
a) Component A: Batteries, chargers and carrying case, which are
guaranteed for a period of 2 years from the date of original retail
purchase against defects in workmanship and materials;
b) Component B: Accessories, which are guaranteed for a period of
1-year from the date of original retail purchase against defects
in workmanship and materials.
Subject to the conditions and limitations described below, this product, if returned to us with proof
of purchase within the stated warranty period and if covered under this warranty, will be
repaired or replaced (with the same model, or one of equal value or specification), at our option. We will
bear the cost of any repair or replacement and any costs of labour relating there to.
These warranties are subject to the following conditions and
limitations:
a)a bill of sale verifying the purchase and purchase date must be provided;
b)this warranty will not apply to any product or part thereof which is worn or broken or which has become
inoperative due to abuse, misuse, accidental damage, neglect or lack of proper installation, operation or
maintenance (as outlined in the applicable owner’s manual or operating instructions) or which is being
used for industrial, professional, commercial or rental purposes;
c) this warranty will not apply to normal wear and tear or to expendable parts or accessories that may be
supplied with the product which are expected to become inoperative or unusable after a reasonable
period of use;
d)this warranty will not apply to routine maintenance and consumable items such as, but not limited to,
fuel, lubricants, vacuum bags, blades, belts, sandpaper, bits, fluids, tune-ups or adjustments;
e)this warranty will not apply where damage is caused by repairs made or attempted by others (i.e.
persons not authorized by the manufacturer);
f) this warranty will not apply to any product that was sold to the original purchaser as a reconditioned or
refurbished product (unless otherwise specified in writing);
g) this warranty will not apply to any product or part thereof if any part from another manufacturer is
installed therein or any repairs or alterations have been made or attempted by unauthorized persons;
h) this warranty will not apply to normal deterioration of the exterior finish, such as, but not limited to,
scratches, dents, paint chips, or to any corrosion or discolouring by heat, abrasive and chemical cleaners;
and
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
22
Additional Limitations
This warranty applies only to the original purchaser and may not be transferred. Neither the retailer
nor the manufacturer shall be liable for any other expense, loss or damage, including, without limitation,
any indirect, incidental, consequential or exemplary damages arising in connection with the sale,
use or inability to use this product.
Notice to Consumer
This warranty gives you specific legal rights, and you may have other rights, which may vary from province
to province. The provisions contained in this warranty are not intended to limit, modify, take away from,
disclaim or exclude any statutory warranties set forth in any applicable provincial or federal legislation.
IMPORTED BY MASTERCRAFT CANADA TORONTO, CANADA M4S 2B8
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
WARRANTY
i) this warranty will not apply to component parts sold by and identified as the product of another company,
which shall be covered under the product manufacturer’s warranty, if any.
INSTRUCTION MANUAL
20V max* Lithium-Ion
Cordless RECIPROCATING
Saw
054-8151-4
If any parts are
missing or damaged,
or if you have any
questions, please call
our toll-free helpline
at 1-800-689-9928.
Read and understand this instruction manual
thoroughly before using the product. It contains
important information for your safety as well as
operating and maintenance advice.
Keep this instruction manual for future use. Should
this product be passed on to a third party, then this
instruction manual must be included.
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
3
SAFETY GUIDELINES 4
DESCRIPTION9
OPERATING INSTRUCTIONS
10
MAINTENANCE 17
TROUBLESHOOTING 18
PARTS LIST 19
WARRANTY 21
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
TABLE OF CONTENTS
TECHNICAL SPECIFICATIONS 2
TECHNICAL SPECIFICATIONS
3
MOTOR
20V DC
No-Load Speed
0–2800 SPM
Blade Stroke 7/8” (22 mm)
Weight (without battery)
4 lb 2 oz (1.86 kg)
*Maximum battery voltage without workload; with workload nominal voltage is 18V.
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
Safety symbols in this Instruction Manual are used to flag possible dangers. The safety
symbols and their explanations require your full understanding. The safety warnings do not,
by themselves, eliminate any danger, nor are they substitutes for proper accident prevention
measures.
WARNING!
This Safety Alert Symbol indicates caution, warning, or danger. Failure to obey a safety
warning can result in serious injury to yourself or others. To reduce the risk of injury, fire, or
electric shock, always follow the safety precautions.
Know your tool
To operate this tool, carefully read this Instruction Manual and all labels affixed to the Cordless
Reciprocating Saw before using it. Keep this Instruction Manual available for future reference.
Important
This tool should only be serviced by a qualified service technician. For more information, call the toll-free
helpline at 1-800-689-9928.
READ ALL INSTRUCTIONS THOROUGHLY.
SAVE THESE INSTRUCTIONS.
Safety guidelines for cordless power tools
WARNING!
Read all safety warnings and instructions. Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury. Save all warnings and instructions for future
reference. The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
Work area safety
• Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks, which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
SAFETY GUIDELINES
WARNING!
4
SAFETY GUIDELINES
5
Electrical safety
• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep the
cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of
electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a ground-fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
Personal safety
• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not
use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while
operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection, used for appropriate conditions, will reduce
personal injuries.
• Prevent unintentional starting. Ensure that the switch is in the off-position before connecting to a
power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger
on the switch or plugging in power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power
tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure that
these are connected and properly used. Use of these devices can reduce dust-related hazards.
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
• Do not force the power tool. Use the correct power tool for your application. The correct power tool will
do the job better and more safely at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the hands
of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories, tool bits, etc., in accordance with these instructions, taking into
account the working conditions and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
Battery tool use and care
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated battery packs. The use of any other battery pack
may create a risk of injury and fire.
• When the battery pack is not in use, keep it away from other metal objects, such as paper clips,
coins, keys, nails, screws, or other small metal objects that can make a connection from one
terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery. Avoid contact. If contact occurs,
flush with water. If liquid comes into contact with the eyes, seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Service
• Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
SAFETY GUIDELINES
Power tool use and care
6
SAFETY GUIDELINES
7
Specific safety guidelines for cordless reciprocating saws
WARNING!
To reduce the risk of electric shock or damage to the charger and battery, use only the
batteries and charger listed.
Battery Pack
054-3124-0
054-3125-8
Charger
054-3126-6
• Hold the power tool by its insulated gripping surfaces when performing an operation where the
cutting accessory may contact hidden wiring. If a cutting accessory contacts a “live” wire, it may
make exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Use clamps or another practical way to support the workpiece and secure it to a stable platform.
Holding the work by hand or against your body leaves it unstable and may lead to loss of control.
• Always remove the battery pack before changing the saw blade and/or adjusting the saw base.
• The saw blade must be securely locked in its holder. Check that it has been securely seated before
use.
• Make certain that all adjusting levers and the blade holder are tight before making a cut. Loose
adjusting levers and holders can cause the tool or blade to slip; loss of control may result.
• Check that the switch is “off” before attaching a battery pack. Accidental starting could cause
injury.
• Secure material before cutting. Never hold the workpiece in your hand or across your legs. Small or
thin material may flex or vibrate with the blade, causing loss of control.
• Never touch the saw blade immediately after use. It may be hot after prolonged use.
• Always wear safety goggles or eye protection when using this tool. Use a dust mask or respirator or
connect the tool to an external dust vacuum if cutting generates a great amount of dust.
• Keep hands away from cutting area. Do not reach under the material being cut. The proximity of the
blade to your hand is hidden from your sight.
• Do not use dull or damaged saw blades and accessories.
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
8
Contents
WARNING!
Remove the Cordless Reciprocating Saw from the package and examine it carefully. Do not
discard the carton or any packaging material until all parts have been examined.
WARNING!
If any part of the Cordless Reciprocating Saw is missing or damaged, do not attach the
battery pack to the tool or use the tool until the part has been repaired or replaced. Failure to
heed this warning could result in serious injury.
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
SAFETY GUIDELINES
Cordless Reciprocating Saw, hex wrench, 2 wood-cutting blades, instruction manual
Know your cordless reciprocating saw
DESCRIPTION
9
4
5
3
2
6
1
No.Description
1
Pivot shoe
2
Tool-less Blade clamp lever
3
Variable-speed trigger switch
No.Description
4
Lock-off button
5
LED worklight
6
Tool-less Blade clamp
Before attempting to use this tool, become familiar with all of its operating features and safety
requirements. For optimum performance and safety, read the following operating instructions carefully
before using this product.
WARNING!
Do not allow familiarity with the Cordless Reciprocating Saw to cause a lack of alertness. A fraction of a second of carelessness is enough to cause severe injury.
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
CAUTION!
Avoid the possibility of accidental starting. Always take care not to
activate the trigger switch when you
are attaching the battery pack or
performing other adjustments to the
tool.
fig 1
NOTE: When placing a battery pack on the tool, be sure that the raised rib on the battery pack aligns with
the groove on the cordless Reciprocating Saw and the latches snap into place properly. Improper assembly
of the battery pack can cause damage to internal components.
1. Ensure that the trigger switch is in the “off” position.
2. Align the raised rib on the battery pack with the grooves on the bottom of the saw, and then attach the
battery pack to the saw.
To detach battery pack (fig 1)
CAUTION!
Avoid the possibility of accidental starting. Always take care not to activate the trigger switch
when you are detaching the battery pack or performing other adjustments to the tool.
1. Ensure that the trigger switch is in the “off” position.
2. Depress the battery-release button located on the front of the battery pack to release the battery pack.
3. Pull the battery forward to remove from the tool.
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
OPERATING INSTRUCTIONS
To attach battery pack (fig 1)
10
11
OPERATING INSTRUCTIONS
Blade selection
To obtain the best performance from the saw, it is important to select the correct blade for the particular
application and type of material to be cut.
Blades with fewer teeth, e.g., 10 teeth per inch (TPI), are typically used for cutting wood; blades with more
teeth are better for cutting metal or plastic. We recommend 14 TPI blades for plastics and soft metals and
18 TPI blades for hard metals.
Installing a saw blade (fig 2)
1. Remove the battery pack from the saw.
fig 2
2. Pivot the blade-clamp lever to open the blade
clamp.
3. Insert the saw blade into the blade clamp as far
as possible, then release the blade-clamp lever
to lock the blade in position.
4. Check that the blade is securely attached.
Removing the saw blade (fig 2)
1. Remove the battery pack from the saw.
2. Pivot the blade-clamp lever to open the blade
clamp.
fig 3
3. Remove the saw blade from the blade clamp.
WARNING!
Never touch the saw blade
immediately after use. It may be hot
after prolonged use.
Base shoe adjustment (fig 3)
For maximum control and longer blade life, the base assembly slides in and out to adjust the effective
stroke length.
1. Remove the battery pack from the saw.
2. Use the hex key (included) to loosen the two screws on the bottom of saw housing.
3. Adjust pivot to the desired position, and retighten both screws.
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
The shoe pivots to provide maximum contact with
the surface being cut.
fig 4
1. Remove the battery pack from the saw.
2. Hold the saw securely, and then pivot the shoe
to the desired angle.
WARNING!
To avoid injury and damage, do not
operate the saw without the pivoting
shoe in place. The spindle may strike
against the workpiece and damage
the reciprocating mechanism.
fig 5
Variable-speed trigger switch
(fig 5)
Your reciprocating saw is equipped with a trigger
switch to turn the saw on and off, and to control the
speed.
1. To start the saw, depress the lock-off button and then squeeze the trigger switch.
2. To stop the saw, release the trigger switch and allow it to return to the “OFF” position.
3. To vary the speed, simply increase or decrease the pressure on the trigger switch. The more tightly the
trigger switch is squeezed, the higher the speed.
Electric brake
To stop the tool, release the trigger switch and allow the blade to come to a complete stop. The electric
brake quickly stops the motion. This feature engages automatically when you release the trigger switch.
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
OPERATING INSTRUCTIONS
Pivoting the shoe (fig 4)
12
OPERATING INSTRUCTIONS
13
LED Worklight (fig 6)
The LED worklight, located on the front of the saw,
provides additional light on the surface of the
worklight for operation in lower-light areas.
fig 6
The LED worklight will come on when the trigger
switch is depressed. The LED worklight will turn off
when the trigger switch is released.
General cutting (fig 7)
WARNING!
Before attaching the battery pack to
the tool, always check to determine
that the switch performs properly and
returns to the “OFF” position when
released.
WARNING!
fig 7
Hold the tool only by the plastic handle and the insulated grip area to help
prevent electrical shock. You may encounter electrical wiring when sawing into walls or floors.
Sawing into a “live” wire will cause electric shock.
1. Remove the battery pack from the saw.
2. Make sure that the workpiece is firmly clamped in place.
3. Use the appropriate type and size of blade for the workpiece material and size.
4. Adjust the pivoting shoe as necessary to make sure that the blade will extend beyond the shoe and the
workpiece at all times.
5. Adjust the pivoting shoe as necessary to expose unworn blade teeth for longer blade life.
6. Check for clearance behind the workpiece so that the blade will not impact another surface.
7. Mark the line of cut clearly. If cutting metal, apply cutting oil to the line.
8. Attach the battery pack to the saw.
9. Hold the saw firmly with both hands. Make sure to keep your hands on the insulated gripping areas only.
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
11.Place the flat surface of the shoe firmly on the workpiece while cutting. Use only enough steady
pressure on the blade to keep the saw cutting; do not force the tool.
12.Reduce pressure as the blade comes to the end of the cut.
13.Allow the saw to come to a complete stop before removing the blade from the workpiece.
14.If sawing fiberglass, plaster, wallboard, or spackling compound, clean the motor vents frequently with
a vacuum or compressed air. These materials are highly abrasive and may accelerate the wear on
motor bearings and brushes.
WARNING!
Always wear safety goggles when cleaning tools with compressed air.
WARNING!
Do not allow familiarity with the saw to make you careless. One careless fraction of a second
is enough to inflict serious injury.
NOTE: Cutting speeds should vary with the workpiece. Hard materials, such as metals, require lower
speeds; use higher speeds for softer materials.
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
OPERATING INSTRUCTIONS
10.Depress the lock-off button and trigger switch to start the saw and bring it to the maximum desired
cutting speed before applying the blade to the workpiece.
14
OPERATING INSTRUCTIONS
15
Plunge cutting (fig 8)
Your reciprocating saw is ideal for plunge cutting
directly into surfaces that cannot be cut from an
edge, such as walls or floors. Plunge cutting may be
performed two ways, depending on how the blade is
inserted.
fig 8
Column A shows how to plunge cut with the teeth
of the blade facing down. Column B shows how to
plunge cut with the teeth of the blade facing up.
WARNING!
Do not plunge cut into metal surfaces.
1. Remove the battery pack from the saw.
2. Make sure that the workpiece is firmly clamped
in place.
3. Use the appropriate type and size of blade for the workpiece material and size.
4. Insert the blade into the tool.
5. Adjust the pivoting shoe as necessary to make sure that the blade will extend beyond the shoe and the workpiece at all times.
6. Adjust the pivoting shoe as necessary to expose unworn blade teeth for longer blade life.
7. Check for clearance behind the workpiece so that the blade will not impact another surface.
8. Attach the battery pack to the saw.
9. If the blade is inserted with the teeth facing downward, hold the tool as shown in column A, resting the
edge of the shoe on the workpiece.
10.With the blade just above the workpiece, depress the lock-off button and trigger the switch to start the
saw and bring it to the maximum desired cutting speed. Then, using the edge of the shoe as a pivot,
lower the blade into the workpiece.
11.As the blade starts cutting, raise the handle of the tool slowly, until the flat surface of the shoe rests
firmly on the workpiece.
12.After the blade has penetrated through the workpiece, continue sawing along the marked cutting line.
NOTE: To make plunge cutting easier, use a heavy gauge blade and install the blade with the teeth facing
upward as show in Column B.
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
WARNING!
To reduce the risk of explosion, electric shock and property damage, always check the work
area for hidden gas pipes, electrical wires or water pipes when making blind or plunge cuts.
WARNING!
To avoid loss of control and serious injury, make sure that the blade reaches maximum speed
before touching it to the workpiece.
WARNING!
Do not make plunge cuts in metal materials.
Metal cutting
The saw can be used to cut metals, such as sheet steel, pipe, steel rods, aluminum, brass, and copper. Be
careful not to twist or bend the saw blade. Do not force the tool.
The use of cutting oil is recommended when cutting soft metals and steel. Cutting oil will keep the blade
cool, increase cutting action, and prolong blade life.
WARNING!
Never use gasoline, because normal sparking could ignite the fumes.
1. Securely clamp the workpiece in position, and make the cut close to the clamping point to minimize vibration.
2.When cutting conduit pipe or angle iron, clamp the work in a vise, if possible, and cut close to the vise.
3. To cut thin sheet material, “sandwich” the material between pieces of hardboard or plywood, and clamp the layers together to reduce vibration and tearing of the material.
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
OPERATING INSTRUCTIONS
16
17
MAINTENANCE
General maintenance
WARNING!
To avoid personal injury, always remove the battery pack from the tool when cleaning or
performing any maintenance.
WARNING!
Do not let brake fluids, gasoline, petroleum-based products, penetrating oil, etc. come into
contact with plastic parts. These substances contain chemicals that can damage, weaken, or
destroy plastic.
The tool may be cleaned most effectively with compressed dry air. Always wear safety goggles when
cleaning tools with compressed air. Before each use:
• Inspect the cordless tool and the trigger switch for damage.
• Check for damaged, missing, or worn parts.
• Check for loose screws, misalignment or binding of moving parts, or any other condition that may affect
the operation.
• If abnormal vibration or noise occurs, turn the cordless tool off immediately, and have the problem
corrected before further use.
WARNING!
When servicing, use only identical replacement parts. The use of any other parts may create a
hazard or cause damage to the product.
WARNING!
Use only accessories that are recommended for this Reciprocating Saw by the manufacturer.
Accessories that may be suitable for one tool may become hazardous when used with another
tool.
WARNING!
To ensure safety and reliability, all repairs should be performed by a qualified service
technician.
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
18
The motor does not start.
The blade binds, jams, or
burns the wood.
The saw vibrates or
shakes.
POSSIBLE CAUSES
SOLUTIONS
The battery is depleted.
Charge the battery pack.
The blade is dull.
Replace the blade.
An improper blade is being used.
Replace the blade.
The blade is warped.
Replace the blade.
The blade is damaged.
Replace the blade.
The blade is loose.
Remove the blade and reinstall it.
If the problem remains unsolved after performing the checks described above, call the t­oll‑free helpline at
1-800-689-9928.
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
TROUBLESHOOTING
PROBLEM
19
PARTS LIST
Exploded view
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
33 3660260000
Torsion Spring
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
PARTS LIST
No. Part No.
Description
No. Part No.
Description
01 3810008000 Reciprocating Saw Blade
34 5670244000 Pin
201
2822578000Plunger Assembly
35
3704168000Clamp
02 5660145000 Circlips For Shaft 36 2822287000 Pivot Shoe
03 3421211000 Rotate Bush 37 3704272000 Slip Bush
045670194000 Pin
385620050000 Screw
055670199000 Pin
394360001000 LED
063551279000 Bush
403321455000 Right Housing
07 3660386000 Torsion Spring
41 5610106000 Tapping Screw
083125769000 Sleeve
423660075000 Spring
102823422000 Plunger Assembly
433126627000 Button
115670247000 Pin
444870391000 Switch
125670303000 Pin
455690192000 O Ring
133520428000 Clamp Block
463520429000 Pinion
143704263000 Plate
472730193000 Motor
15 5610057000 Thread Forming Screw
48 3402627000 Contact Receptacle Assembly
16 5620489000 Screw With Washer
49 5680031000 Hexagon Wrench
17 3704262000 Gear Case Cover
18 5660027000 Circlips For Shaft
19 3520431000 Crank Roller
205650302000 Washer
21 2822591000 Gear Set
22 5700006000 Ball Bearing
23 5660164000 Circlips for Hole
24 5700199000 Ball Bearing
25 3420844000 Gear Case
26 3124566000 Clamp Block
28 5620213000 Hexagon Socket Screw
29 5650015000 Spring Washer
30 3124565000 Clamp Block
313402364000 Lever
32 3321456000 Left Housing
20
WARRANTY
21
3
YEAR
LIMITED WARRANTY†
This Mastercraft product is guaranteed three (3) years from the
date of original retail purchase against defects in materials and
workmanship, except for the following components:
a) Component A: Batteries, chargers and carrying case, which are
guaranteed for a period of 2 years from the date of original retail
purchase against defects in workmanship and materials;
b) Component B: Accessories, which are guaranteed for a period of
1-year from the date of original retail purchase against defects
in workmanship and materials.
Subject to the conditions and limitations described below, this product, if returned to us with proof
of purchase within the stated warranty period and if covered under this warranty, will be
repaired or replaced (with the same model, or one of equal value or specification), at our option. We will
bear the cost of any repair or replacement and any costs of labour relating there to.
These warranties are subject to the following conditions and
limitations:
a)a bill of sale verifying the purchase and purchase date must be provided;
b)this warranty will not apply to any product or part thereof which is worn or broken or which has become
inoperative due to abuse, misuse, accidental damage, neglect or lack of proper installation, operation or
maintenance (as outlined in the applicable owner’s manual or operating instructions) or which is being
used for industrial, professional, commercial or rental purposes;
c) this warranty will not apply to normal wear and tear or to expendable parts or accessories that may be
supplied with the product which are expected to become inoperative or unusable after a reasonable
period of use;
d)this warranty will not apply to routine maintenance and consumable items such as, but not limited to,
fuel, lubricants, vacuum bags, blades, belts, sandpaper, bits, fluids, tune-ups or adjustments;
e)this warranty will not apply where damage is caused by repairs made or attempted by others (i.e.
persons not authorized by the manufacturer);
f) this warranty will not apply to any product that was sold to the original purchaser as a reconditioned or
refurbished product (unless otherwise specified in writing);
g) this warranty will not apply to any product or part thereof if any part from another manufacturer is
installed therein or any repairs or alterations have been made or attempted by unauthorized persons;
h) this warranty will not apply to normal deterioration of the exterior finish, such as, but not limited to,
scratches, dents, paint chips, or to any corrosion or discolouring by heat, abrasive and chemical cleaners;
and
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
Additional Limitations
This warranty applies only to the original purchaser and may not be transferred. Neither the retailer
nor the manufacturer shall be liable for any other expense, loss or damage, including, without limitation,
any indirect, incidental, consequential or exemplary damages arising in connection with the sale,
use or inability to use this product.
Notice to Consumer
This warranty gives you specific legal rights, and you may have other rights, which may vary from province
to province. The provisions contained in this warranty are not intended to limit, modify, take away from,
disclaim or exclude any statutory warranties set forth in any applicable provincial or federal legislation.
Imported by Mastercraft Canada Toronto, Canada M4S 2B8
IMPORTED BY MASTERCRAFT CANADA TORONTO, CANADA M4S 2B8
20V max* Lithium-Ion Cordless RECIPROCATING Saw - 054-8151-4
WARRANTY
i) this warranty will not apply to component parts sold by and identified as the product of another company,
which shall be covered under the product manufacturer’s warranty, if any.
22
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising