Rain Bird | 1804F | Installation guide | Rain Bird 1804F Installation Guide

1800® Series Spray Heads
and MPR Nozzles
Rain Bird® 1800 Series Spray Heads and
MPR Nozzles are installed by more
contractors than all other brands combined.
This worry-free combination distributes
water evenly, ensuring a consistently
green lawn.
Smaller grassy areas around sidewalks and driveways;
can also be used for watering flowerbeds or shrubs.
Outstanding Results:
•• A wide selection of MPR nozzles is available so the
distribution of water can be tailored to meet the
unique and diverse needs of your landscape.
•• MPR nozzles are designed to provide uniform coverage,
ensuring that your lawn is green throughout, with no
dry or brown spots.
•• The wiper seal on 1800 Sprays significantly reduces the
amount of water that may leak out when the sprinkler
pops back down, saving you water and money.
•• 4" 6" and 12" pop-up heights for varying grass or
shrub heights.
•• Seal‑A‑Matic (SAM) check valves, which prevents the
pooling of water at the base of slopes or hillsides.
•• Pressure Regulating Stem (PRS), which regulates
pressure, eliminating misting or fogging at the head.
Rain Bird Corporation
6991 East Southpoint Road
Tucson, AZ 85706
Phone: (520) 741-6100
Fax: (520) 741-6522
Technical Service and Support
(800) RAINBIRD (U.S. and Canada only)
The Right Choice for
a Beautiful Landscape
The Intelligent Use of Water™ — Visit www.rainbird.com to learn about our efforts.
® Registered Trademark of Rain Bird Corporation
© 2007 Rain Bird Corporation 12/07
Download PDF