Thermometers 2013
Thermometers
& instrumentation for industry
2013
INDUSTRIAL THERMOMETERS
Industrial Thermometers
digital & dial
Selecting the correct thermometer for an application is by
definition very important, to achieve the maximum accuracy
and repeatability of the temperature reading.
The selection criteria for a digital thermometer should include:
l measurement range
l resolution of the reading 1 °C, 0.1 °C or 0.01 °C
l desired accuracy
l response time
Our digital thermometers utilise one of three types of
temperature sensors, thermocouple, NTC thermistor
and resistance temperature detectors (PT100 or RTD).
Thermocouple thermometers and probes are fast to respond to
changes in temperature, they also have a wide measurement
range. Resistance temperature detector and NTC thermistor
thermometers and probes are slower to respond to changes in
temperature, but generally more accurate, although thermistor
probes have a limited measurement range.
-200
0
200
400
600
800
1000
1200 °C
NTC
PT100 or RTD
THERMOCOUPLE TYPE T
THERMOCOUPLE TYPE K
NTC thermistors
NTC thermistor probes are also based on a temperature
dependent resistance change in the sensor element. But
unlike resistance thermometer detectors, thermistors
have a negative temperature coefficient, i.e the resistance
decreases with increasing temperature.
resistance temperature detectors
Resistance temperature detector (PT100 or RTD) probes
consist of a flat film or wire wound platinum resistance
sensor element. The measurement resistance value changes
in line with the temperature being measured.
thermocouples
2
Thermocouple probes consist of two wires of dissimilar
metals or metal alloys welded together. Thermocouples
are based on the thermoelectric (Seebeck) effect. There
are various types of thermocouple, types K and T being
the most common, although type K is by far the most
widely used.
for 2
Thermapen™ with
Backlit Display
page 6
Thermamite™ thermometer
NEW improved design
page 6
page no.
3000 series/3101 dry-well calibrators
21
6000 series therma-hygrometers
36
6500 series therma-hygrometer
37
7000 series moisture meters
37-38
BackLit Thermapen™
6
BlueTherm™ Duo
16
BlueTherm™ Probe
16
comparator18
HVAC & Legionnaires' kits
infrared thermometers
11
24-27
MicroCal 1/1 Plus Calibrator
ThermaCheck Plus
waterproof thermometer
page 7
page 16
Mini RayTemp™
Infrared Thermometer
page 25
S/Steel & Thermocouple
ThermaData™ Loggers
pages 31 & 34
6500 Therma-Hygrometer
page 37
8100 Plus pH Meter
page 41
20
moisture meters & probes
37-38
pH testers/meters & electrodes
39-42
Precision PT100 thermometers
22
probes - K thermocouple
BlueTherm™ Duo
Bluetooth® Data-Logger
CONTENTS
s
t
c
u
W
d
NE Pro 13
0
description 12-15
probes - heavy duty
14
probes - fast response
15
probes - PT100
23
PTR - Printing Temperature Recorder
17
RayTemp™ infrared thermometers
25-27
RF ThermaData™ Wireless Loggers
32-33
Reference Thermapen™
19
Reference thermometers
18
Therma Differential thermometer
10
Therma Series thermometers
8
Therma Waterproof thermometer
9
ThermaCheck thermometer
7
ThermaCheck Plus thermometer
7
ThermaData™ loggers
28-35
ThermaLite™ thermometers
4
Thermamite™ thermometer
7
Thermapen™ thermometers
5-6, 19
therma-hygrometers36-37
UKAS Temperature Calibration & Service
43
3
INDUSTRIAL THERMOMETERS
ThermaLite™ Thermometers
with assured accuracy for life
l temperature range -39.9 to 149.9 °C, with a high accuracy
l water resistant IP65 when used with silicone boot
l ThermaLite 2 includes CalCheck function
l FREE traceable certificate of calibration
The ThermaLite digital thermometers display temperature over the range of
-39.9 to 149.9 °C with a 0.1 °C resolution and an accuracy of ±0.5 °C
(-39.9 to 124.9 °C). This accuracy is guaranteed for life, due to the
instruments advanced electronics. The ThermaLite 2 incorporates
a CalCheck, °C/°F and hold functions.
The thermometers weigh only 45 grams including battery, and
feature a clear, easy to read LCD display with an open circuit
'Err' and low battery indication. The ThermaLite's auto-power
off facility turns the instrument off automatically after ten
minutes, maximising battery life. The thermometer is
housed in a high impact ABS plastic case which includes the
Biomaster additive that reduces bacterial growth.
The pointed, Ø3.3 x 130 mm stainless steel, penetration probe is
ideal for measuring the temperature of liquids and semi-solid materials.
The ThermaLite is available in six colours, suitable for different applications.
ThermaLite 2 with CalCheck function
The ThermaLite 2 incorporates a CalCheck 0 °C function. The
CalCheck is activated by pressing both the 'on/off' and 'hold' buttons simultaneously at the time of switching the unit on.
The
ThermaLite is waterproof to IP65 when used in
conjunction with the protective silicone boot (830-280)
order code
4
226-301
226-311
226-321
226-331
226-341
226-351
226-302
226-312
226-322
226-332
226-342
226-352
830-280
description
ThermaLite 1 - grey
ThermaLite 1 - white
ThermaLite 1 - yellow
ThermaLite 1 - green
ThermaLite 1 - red
ThermaLite 1 - blue
ThermaLite 2 - grey
ThermaLite 2 - white
ThermaLite 2 - yellow
ThermaLite 2 - green
ThermaLite 2 - red
ThermaLite 2 - blue
protective silicone boot
°C/°F
HOLD
AUTO
0FF
Assured
Accuracy
specification
ThermaLite 1 & 2
range
-39.9 to 149.9 °C
resolution
0.1 °C (0.1 °C/°F - ThermaLite 2)
accuracy
±0.5 °C (-39.9 to 124.9 °C)
battery
3 volt CR2032 lithium coin cell
battery life
3000 hours
sensor type
thermistor
display
10 mm LCD
dimensions
Ø29 x 246 mm
weight
45 grams
FREE traceable certificate of calibration included
INDUSTRIAL THERMOMETERS
Thermapen™ Thermometer
with air, surface or penetration probe
ltemperature range -49.9 to 299.9 °C
l lightweight, compact & easy to use
l foldaway stainless steel probe
l auto-power on/off facility
The Thermapen thermometer incorporates a large digital
display with a precise read-out over the range of -49.9
to 299.9 °C with a 0.1 °C resolution and an accuracy
of ±0.4 °C. The resolution can be switched to 1 °C, if
required, via a switch in the battery compartment. The
thermometer will power off automatically after ten minutes,
maximising battery life. This feature can be disabled if not
required. Both low battery (icon) and open circuit indication
are also displayed, when applicable. Each Thermapen is
powered by two lithium coin cell batteries with a minimum
life expectancy of 1500 hours.
air probe
The Thermapen thermometer probe conveniently folds
back through 180 degrees into the side of the instrument
when not in use. The casing is washable and includes
'Biomaster' additive that reduces bacteria growth and the
ergonomic rubber seal minimises the risk of the ingress of
water and dust particles.
surface probe
choice of probe styles
The Thermapen thermometer is also available with three alternative styles of probe; surface, air or penetration.
The fast response air probe is an invaluable tool in establishing the correct air temperature quickly in HVAC
and laboratory applications. The surface probe is particularly useful in determining the temperature of hot
plates or pipe temperatures etc. Please note: the accuracy and speed of response will be dependant on
whether the surface is flat and heat transfer compound is used.
penetration probe
This strong, versatile penetration
probe with a pointed, general
purpose tip is suitable for
insertion
into
liquids
and
semi-solid materials.
surface probe
air probe
This ribbon surface probe is
ideal for measuring the
temperature
of
bearings,
hotplates, pipework and other
flat surfaces.
This fast response air probe is
ideal for measuring the air
temperature in laboratories and
other temperature sensitive
working areas.
Ø3.3 x 108 mm
°C
Ø8 x 95 mm
AUTO
0FF
order code description
231-210 Thermapen white - penetration probe
231-212 Thermapen white - surface probe
231-214 Thermapen white - air probe
830-260 protective silicone boot
830-265 silicone boot - glow in dark
830-110 protective wallet
832-200 wall bracket
Thermapen is supplied in a zip pouch (830-001)
Ø3.3 x 95 mm
specification Thermapen range
-49.9 to 299.9 °C
resolution
0.1 °C or 1 °C - user selectable
accuracy
±0.4 °C (-49.9 to 199.9 °C) or ±1 °C
battery
2 x 3 volt CR2032 lithium coin cell
battery life
1500 hours
sensor type
K thermocouple
display
14.3 mm LCD
dimensions
19 x 47 x 153 mm
weight
97 grams
FREE traceable certificate of calibration included
5
INDUSTRIAL THERMOMETERS
Thermapen™
NEW
with intelligent backlit display
l temperature range -49.9 to 299.9 °C
l assists in areas where lighting is poor
This new model of the Thermapen thermometer features all
the benefits of the SuperFast Thermapen with the additional
feature of an intelligent backlit LCD display.
The intelligent backlit display continuously monitors light
levels and only illuminates the LCD display when ambient
light levels are low, making it easier to read in low light levels.
This feature also maximises battery life.
The battery life is reduced to a minimum of 100 hours when
the backlight is in continuous use. In normal use when the
backlight is not used the battery life is 1500 hours. For a full
specification, see page 5.
°C
order code
optional accessory
l NEW glow in the dark protective
silicone boot with magnets (830-265)
230-217
230-247
230-257
830-260
830-265
830-110
830-001
832-200
AUTO
0FF
description
Thermapen Backlight - white
Thermapen Backlight - red
Thermapen Backlight - blue
protective silicone boot
silicone boot - glow in dark
protective wallet
zip pouch
wall bracket
Thermamite™ Thermometer
complete with penetration probe
l FREE traceable certificate of calibration
l compact & robust design
The Thermamite thermometer offers accuracy, flexibility and ease of use,
coupled with the durability and reliability that is required by industry.
The thermometer incorporates a clear LCD display with a precise read-out of
temperature over the range of -50 to 300 °C with a 1 °C resolution. Low battery
and open circuit indication are also displayed, when applicable. The unit will
power off automatically after ten minutes, maximising battery life.
Each thermometer is supplied with a permanently
attached pointed, stainless steel penetration probe
(Ø3.3 x 100 mm) and a 500 mm PVC lead.
°C
order code
261-050
830-251
832-050
6
AUTO
0FF
description
Thermamite
protective silicone boot s/steel wall bracket & boot
specificationThermamite
range
-50 to 300 °C
resolution
1 °C
accuracy
±1 °C ±0.1 %
battery
3 x 1.5 volt AAA
battery life
minimum 5 years (10000 hours)
sensor type
K thermocouple
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
130 grams
FREE traceable certificate of calibration included
complete with thermistor penetration probe
l assured accuracy for the life of the thermometer
l high system accuracy ±0.4 °C
The ThermaCheck thermistor thermometer
has been specifically designed for use in industrial
processing and laboratories to cope with routine
day-to-day usage.
The instrument is housed in an ergonomic, robust
ABS case that includes 'Biomaster' additive which
reduces bacterial growth. The thermometer's
auto-power off facility turns the instrument off
automatically after ten minutes.
The ThermaCheck thermometer is supplied complete
with a permanently attached penetration probe with
a 130 mm stainless steel stem and a one metre
coiled PU lead.
order code
226-042
830-251
832-050
description
ThermaCheck
protective silicone boot
s/steel wall bracket & boot
°C
AUTO
0FF
Assured
Accuracy
specificationThermaCheck
range
-39.9 to 149.9 °C
resolution
0.1 °C
system accuracy
±0.4 °C (-20 to 70 °C)
battery & life
3 x 1.5 volt AAA - 20000 hours
sensor type
thermistor
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
220 grams
FREE traceable certificate of calibration included
ThermaCheck Plus
waterproof thermometer & probe
INDUSTRIAL THERMOMETERS
ThermaCheck Thermometer
NEW
l robust waterproof case offering IP66/67 protection
l backlight, auto-off, max/min & hold functions
The new ThermaCheck Plus thermistor thermometer
utilises state of the art electronic circuitry, designed
for reliability and ease of use and can be submerged
or washed under a running tap - ideal for industrial
applications
The instrument is housed in an ergonomic, ABS
case that includes 'Biomaster' additive which reduces
bacterial growth. Each ThermaCheck Plus has an
integrated rubber seal to ensure complete water
resistance and helps to reduce the possibility of damage
in harsh environments.
Each unit is supplied complete with a permanently
attached penetration probe with a 130 mm stainless
steel stem and one metre coiled PU lead.
order code description
232-042
830-257
ThermaCheck Plus
protective silicone boot
°C/°F
HOLD
MAX
MIN
AUTO
OFF
IP66/67
specification
ThermaCheck Plus
range
-39.9 to 149.9 °C
resolution
0.1 °C
system accuracy
±0.4 °C (-10 to 70 °C)
battery & life
3 x 1.5 volt AAA - 10000 hours
sensor type
thermistor
display
15 mm LCD
dimensions
32 x 71 x 141 mm
weight
220 grams
FREE traceable certificate of calibration included
7
INDUSTRIAL THERMOMETERS
Therma 1, 3 & Elite Thermometers
with interchangeable thermocouple probes
l FREE traceable certificate of calibration included
l Elite model includes max/min & backlight
l wide temperature measurement range
l minimum five-years battery life
The Therma 1 and 3 digital thermometers are rugged and easy to use instruments
that operate through the range of -100 to 1372 °C with a 0.1 °C or 1 °C
resolution. The thermometers are housed in a robust ABS case that contains
'Biomaster' additive that helps to reduce bacterial growth.
The Therma 1 and 3 feature a large, easy to read, LCD display with open circuit
'Err', hold and low battery indication. Each thermometer is powered by three 1.5
volt AAA batteries that give a minimum of five years battery life. The units will
power off automatically after ten minutes, maximising battery life. This feature can
be disabled by the user, if required.
ETI offer an extensive range of interchangeable type K thermocouple probes, for a variety
of different applications, see pages 12 to 15 for full details.
Therma Elite
The Therma Elite incorporates all the features of a Therma 1 thermometer, but with the
addition of a backlit display, max/min memory function and a mode button for the selection
of 0.1/1 °C/°F. The thermometer also incorporates a calibration trim function (±2 °C)
which allows users to compensate for thermocouple probe errors.
optional accessories
l protective black silicone boot (830-253) the Therma series is
waterproof to IP63 when used in conjunction with this boot
l stainless steel wall bracket (screws not supplied) and
protective black silicone boot (832-053)
°C/°F
HOLD
specification
order code
8
description
221-041
Therma 1
221-043
Therma 3
221-061
Therma Elite
830-253
protective black silicone boot
832-053
s/steel wall bracket & boot
the Therma series is exclusive of probe
MAX
MIN
AUTO
0FF
Therma 1/Elite
Therma 3
range 0.1 °C
-99.9 to 299.9 °C
range 1 °C
300 to 1372 °C
-100 to 1372 °C
resolution
0.1 °C & 1 °C
1 °C
accuracy
±0.4 °C ±0.1 %
±1 °C ±0.1 %
battery
3 x 1.5 volt AAA
battery lifeminimum 5 years (10000 hours)
sensor type
K thermocouple
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
130 grams
FREE traceable certificate of calibration included
with interchangeble thermocouple probes
l robust waterproof case offering IP66/67 protection
l backlight, max/min & hold functions
l integrated rubber seal for durability
l designed for reliability & ease of use
The Therma Waterproof thermometer is housed in a robust
waterproof black ABS case which offers IP66/67 protection. The
thermometer utilises state of the art electronic circuitry, designed
for reliability and ease of use and can be submerged or washed
under a running tap - ideal for industrial applications.
The thermometer measures temperature over the range of -99.9
to 299.9 °C with a 0.1 °C resolution, auto-ranging to 1 °C
resolution over the range of 300 to 1372 °C.
INDUSTRIAL THERMOMETERS
Therma Waterproof Thermometer
The Therma Waterproof thermometer features a large easy to read,
LCD display with max/min, hold, open circuit, low battery indication
and an optional backlight. The unit also incorporates an auto-power
off facility that automatically turns the instrument off after ten minutes,
maximising battery life.
Each unit is housed in a durable, ABS case that incorporates an
integrated rubber seal to ensure complete water tightness and help
reduce the possibility of damage in harsh environments.
ETI offer an extensive range of interchangeable type K thermocouple
probes, for a variety of different applications, see pages 12 to 15
for full details.
°C/°F
optional accessories
l protective
silicone boot (830-257)
l UniWipes - ideal for cleaning probes and everyday work surfaces (836-030)
order code description
232-101
Therma Waterproof
830-257
protective silicone boot
the Therma Waterproof is exclusive of probe
HOLD
MAX
MIN
AUTO
OFF
IP66/67
specification
Therma Waterproof
range 0.1 °C
-99.9 to 299.9 °C
range 1 ° C
300 to 1372 °C
resolution
0.1 °C to 299.9 °C thereafter 1 °C
accuracy
±0.4 °C ±0.1 % of reading
battery
3 x 1.5 volt AAA
battery life
minimum 5 years (10000 hours)
sensor type
K thermocouple
display
15 mm LCD
dimensions
32 x 71 x 141 mm
weight
220 grams
FREE traceable certificate of calibration included
9
INDUSTRIAL THERMOMETERS
Therma Differential Thermometer
two channel, T1 or T2 or T1 minus T2 differential
l ideal for radiator balancing or HVAC applications
l FREE traceable certificate of calibration
l backlight, max/min & hold functions
l integrated rubber seal for durability
The Therma Differential is a digital thermometer that allows the
user to use two type K thermocouple probes simultaneously. The
display can be switched to show probe T1 or T2 temperature or
the difference between probes T1 and T2 (T1-T2). This allows,
for example, the temperature drop across radiators or the
temperature rise or fall of two items to be measured.
The Therma Differential measures temperature over the
range of -99.9 to 299.9 °C with a 0.1 °C resolution or 300 to
1372 °C with a 1 °C resolution. The thermometer features a
custom, LCD display with °C, T1, T2, diff, hold, open circuit, low
battery indication and an optional backlight. The unit incorporates
an auto-power off facility that automatically turns the instrument
off after approximately ten minutes, maximising battery life.
Each unit is housed in a durable, ABS case that has an integrated
rubber seal to ensure complete water tightness and help reduce
the possibility of damage in harsh environments.
ETI offer an extensive range of interchangeable type K
thermocouple probes, for a variety of different applications, see
pages 12 to 15 for full details.
optional accessories
l protective silicone boot c/w foot
stand and magnet for mounting on
pipes, radiators etc.. (830-258)
l UniWipes - ideal for cleaning
probes and everyday work surfaces
(836-030)
°C/°F
HOLD
specification
order code description
231-022
Therma Differential
830-258
protective silicone boot
the Therma Differential is exclusive of probe
10
MAX
MIN
AUTO
0FF
Therma Differential
range 0.1 °C
-99.9 to 299.9 °C
range 1 ° C
300 to 1372 °C
resolution
0.1 °C to 299.9 °C thereafter 1 °C
accuracy
±0.4 °C ±0.1 % of reading
battery
3 x 1.5 volt AAA
battery life
7500 hours
sensor type
K thermocouple
display
15 mm LCD
dimensions
32 x 71 x 141 mm
weight
220 grams
FREE traceable certificate of calibration included
excellent value for money - FREE carrying case
This thermometer kit is designed for specific industrial applications. For a full specification on the Differential
thermometer see opposite. This kit represents excellent value for money as it is supplied in a FREE carrying case.
each kit contains:
l Differential
thermometer (231-022)
penetration probe (123-160)
l 2 x pipe clamp probes (133-040)
l ABS carrying case (834-300)
l
°C/°F
HOLD
MAX
MIN
INDUSTRIAL THERMOMETERS
HVAC Thermometer Kit
AUTO
0FF
order code description
860-090 HVAC thermometer kit
FREE traceable certificate of calibration included
Legionnaires' Thermometer Kit
temperature monitoring of water
Incorrect water temperature is a key risk factor for legionella growth. The legionella bacteria multiply in water at
temperatures between 20 to 45 °C, particularly if a supply of nutrients is present, such as scale, rust, sludge or
algae. A typical method of control is to store cold water below 20 °C. Hot water should be stored above 60 °C
and distributed above 50 °C.
each kit contains:
l Therma
1 thermometer (221-041)
penetration probe (123-160)
l precision ribbon surface probe (123-030)
l PTFE wire probe (133-362)
l countdown timer (806-150)
l tub of 40 UniWipes (836-032)
l ABS carrying case (834-150)
l
°C
HOLD
AUTO
0FF
order code description
860-860 Legionnaires' thermometer kit
FREE traceable certificate of calibration included
11
TEMPERATURE PROBES
Hand Held Temperature Probes
type K thermocouple
order code
penetration probe
123-160
This stainless steel penetration probe is strong and
versatile. Ideal for measuring a wide variety of applications
323-160
including liquids and semi-solids. Response time less
(coiled lead)
than three seconds. Probe temperature range -60 to 250 °C.
Ø3.3 x 130 mm
penetration probe
Ø3.3 x 300 mm
fast response probe
This extended, stainless steel penetration probe is 123-168
versatile. Ideal for measuring a wide variety of
applications including liquids and semi-solids. Response 323-168
time less than three seconds. Probe temperature range (coiled lead)
-60 to 250 °C.
This reduced tip, fast response, stainless steel penetration 123-159
probe is ideal for liquids or semi-solids i.e. soft rubber and
other similar materials. Response time less than two seconds. 323-159
(coiled lead)
Probe temperature range -60 to 250 °C.
Ø3.3 x 100 mm
needle penetration probe
Ø1.8 x 130 mm
PTFE handle probe
Ø3.3 x 130 mm
T h i s f a s t r e s p o n s e , s t a i n l e s s s t e e l , n e e d l e 123-100
penetration probe is suitable for liquids and semi-solids
including soft rubber/plastic etc. Response time less than 323-100
(coiled lead)
two seconds. Probe temperature range -60 to 250 °C.
T h i s h i g h t e m p e r a t u r e p e n e t r a t i o n p r o b e 133-162
incorporates a PTFE handle and a two metre PTFE
lead, making it ideal for ovens. Response time
less than three seconds. Probe temperature range -60
to 250 °C.
133-170
This oven probe has a stainless steel handle and a two metre
PTFE high temperature lead. An oven probe without a handle
133-173
is available. Response time less than four seconds. Probe
(no handle)
temperature range -60 to 250 °C
oven probe
Ø3.3 x 130 mm
high temperature probe
Ø1.5 x 130 mm
high temperature probe
Ø3 x 130 mm
Binder probe
Ø3 x 130 mm
This flexible, MI probe can be bent to any shape without 123-204
affecting its performance. Ideal for measuring high
temperatures, i.e. fryers/ furnaces. Response time less than 323-204
(coiled lead)
two seconds. Probe temperature range -200 to 1100 °C.
This flexible, MI probe can be bent to any shape without
123-212
affecting its performance. Ideal for measuring high
temperatures, i.e. fryers/furnaces. Response time less than 323-212
two seconds. Probe temperature range -200 to 1100 °C. (coiled lead)
This rounded tip, stainless steel probe is designed for 123-240
inserting into Binder self-sealing glands to measure the
temperature of vessels or radiators. Response time less 323-240
than three seconds. Probe temperature range -60 to 250 °C. (coiled lead)
Please note: For hand held type T thermocouple probes, replace the third digit (3) of the order code with the number 7
12
type K thermocouple
order code
air or gas probe
Ø4.5 x 130 mm
PTFE roller surface probes
50 x 45 mm
ribbon surface probe
Ø15 x 130 mm
ribbon surface probe
Ø8 x 130 mm
surface probe
Ø6 x 130 mm
heavy duty surface probe
Ø12 x 130 mm
magnet surface probe
Ø24 x 28 mm
pipe clamp probe
for pipes from Ø6 to Ø30 mm
velcro pipe probe
20 x 500 mm
TEMPERATURE PROBES
Hand Held Temperature Probes
This stainless steel, fast response air/gas probe is ideal for 123-300
measuring the air temperature in air conditioning units,
ventilating systems and similar. Response time less than 323-300
0.5 of a second. Probe temperature range -60 to 250 °C. (coiled lead)
These roller surface probes have either s/steel or 123-038
PTFE wheels and are designed for measuring moving
(s/steel)
surfaces and rotating rollers. Max. speed 100 metres per
minute. Response time less than 0.5 of a second. Probe 123-036
(PTFE)
temperature range -60 to 250 °C.
This precision, straight, ribbon surface probe utilises flat 123-030
ribbon technology that ensures a fast, accurate response
with minimal heat loss. Response time less than 0.5 of a
second. Probe temperature range -60 to 250 °C.
This ribbon surface probe is ideal for measuring 123-044
stationary metallic surfaces. A right-angled version
is also available. Response time less than 0.5 of 123-052
(right-angled)
a second. Probe temperature range -60 to 250 °C.
This surface probe incorporates a spring-loaded 123-000
copper disc sensing tip. The probe is ideal for a
variety of surface temperature measurements. Response
time less than two seconds. Probe temperature range
-60 to 600 °C.
123-020
This high temperature surface probe is ideal for measuring
the temperature of hotplates. A right-angled version
123-028
is also available. Response time less than one second.
(right-angled)
Probe temperature range -60 to 1000 °C.
This magnet probe is supplied with a 500 mm PTFE lead. 133-017
Ideal for monitoring the surface temperature of ferrous
metals, e.g. radiators or hotplates. Response time less than
20 seconds. Probe temperature range -60 to 200 °C.
This robust, pipe clamp probe is suitable for 133-040
measuring the surface temperature of pipes in
heating and ventilating systems etc. Response time
less than two seconds. Simple clamp-on design.
Probe temperature range -10 to 100 °C.
This 500 mm wrap-around velcro pipe probe is suitable 133-080
for medium and large pipe temperature measurement in
the HVAC industry. Response time less than 20 seconds.
Probe temperature range -10 to 100 °C.
Please note: For hand held type T thermocouple probes, replace the third digit (3) of the order code with the number 7
13
TEMPERATURE PROBES
Heavy Duty Temperature Probes
type K thermocouple
order code
penetration probe
This robust Ø4 mm stainless steel penetration probe 133-124
incorporates a T-shaped blue polypropylene handle. The
probe is ideal for a variety of heavy duty applications.
Response time less than four seconds. Probe temperature
range -60 to 250 °C.
Ø4 x 100 mm
penetration probe
This robust Ø6.35 mm stainless steel penetration 133-126
probe incorporates a T-shaped blue polypropylene
handle. The probe is suitable for a variety of
heavy duty applications. Response time less than
nine seconds. Probe temperature range -60 to 250 °C. Ø6.35 x 100 mm
reduced tip probe
This Ø6.35 mm stainless steel, reinforced needle probe 133-120
incorporates a T-shaped blue polypropylene handle
and a reduced sensing tip for faster response.
Ideal for a variety of heavy duty applications. Response
time less than 10 seconds. Probe temperature
range -60 to 250 °C.
Ø6.35 x 300 mm
reduced tip probe
Ø8 x 500 mm
reduced tip probe
This Ø8 mm stainless steel, reinforced needle 133-130
probe incorporates a T-shaped blue polypropylene (500 mm)
handle and a reduced sensing tip for faster
response. Ideal for a variety of heavy duty
applications. Response time less than 10 seconds.
Probe temperature range -60 to 250 °C.
This Ø9.5 mm stainless steel, reinforced needle probe
incorporates a T-shaped blue polypropylene handle
and a reduced sensing tip for faster response. Ideal
for applications where a longer probe is required,
i.e. grain silos. Response time less than 17 seconds.
Probe temperature range -60 to 250 °C.
133-136
(1000 mm)
133-135
(1400 mm)
Ø9.5 x 1000 or 1400 mm
reduced tip probe
This Ø9.5 mm stainless steel reinforced needle probe 133-133
incorporates a T-shaped, blue polypropylene handle and
a reduced sensing tip for faster response. Ideal
for applications where a very long probe is required,
i.e. grain silos. Response time less than 17 seconds.
Probe temperature range -60 to 250 °C.
Ø9.5 x 2000 mm
corkscrew probe
Ø8 x 100 mm
This stainless steel probe incorporates a heavy duty 133-175
T-shaped, blue polypropylene handle and a corkscrew
design sensing tip. Ideal for industrial applications. Each
probe is supplied with a one metre PVC detachable
lead. Response time less than nine seconds. Probe
temperature range -60 to 250 °C.
Please note: for hand held type T thermocouple probes, replace the third digit (3) of the order code with the number 7
14
exposed junction wire type K thermocouple
order code
PTFE wire probe
133-362
This PTFE insulated, exposed junction wire probe is
suitable for measuring the air temperature in fridges, freezers,
ovens etc. Response time less than 0.5 of a second. Probe
temperature range -60 to 250 °C.
Ø1.5 x 1000 mm
PTFE wire probe
Ø1.5 x 2000 mm
heavy duty PTFE wire probe
133-363
T h i s P T F E i n s u l a t e d , e x p o s e d j u n c t i o n w i r e
probe is suitable for measuring the air temperature in fridges,
freezers, ovens etc. Response time less than 0.5 of a second.
Probe temperature range -60 to 250 °C.
TEMPERATURE PROBES
Fast Response Temperature Probes
133-372
This heavy duty, PTFE insulated wire probe is ideal for
measuring the air temperature in fridges, freezers etc.
Response time less than 0.5 of a second. Probe temperature
range -60 to 250 °C.
Ø2.4 x 1000 mm
heavy duty PTFE wire probe
Ø2.4 x 2000 mm
fibreglass wire probe
133-373
This heavy duty, PTFE insulated wire probe is ideal for
measuring the air temperature in fridges, freezers etc.
Response time less than 0.5 of a second. Probe
temperature range -60 to 250 °C.
133-382
This fibreglass, exposed junction wire probe is ideal for
measuring the air temperature of ovens, hot cupboards
and similar appliances. Response time less than
0.5 of a second. Probe temperature range -60 to 350 °C.
Ø1.5 x 1000 mm
fibreglass wire probe
Ø1.5 x 2000 mm
attachment pads
12 x 18 mm
miniature plug
133-383
This fibreglass, exposed junction wire probe is ideal for
measuring the air temperature of ovens, hot cupboards
and similar appliances. Response time less than 0.5 of a
second. Probe temperature range -60 to 350 °C.
600-485
These easy to use attachment pads are supplied in
packs of 25. The pads are recommended for attaching
small diameter wire thermocouples to surfaces. These PTFE
pads operate in the range of -50 to 200 °C.
625-217
Miniature thermocouple plugs are a must for accurate
readings when joining probe cables. The flat pins
are manufactured from compatible thermocouple
material and can accommodate wires up to Ø0.5 mm.
16 x 19 mm
miniature socket
16 x 25 mm
421-501
Miniature thermocouple sockets are a must for accurate
readings when joining probe cables. The socket
incorporates compatible thermocouple material and can
accommodate wires up to Ø0.5 mm.
Please note: for hand held type T thermocouple probes, replace the third digit (3) of the order code with the number 7
15
INDUSTRIAL THERMOMETERS
BlueTherm™ Probe
with Bluetooth wireless technology
®
l eliminates wires, cables & connectors
®
l securely transmits data up to twenty metres
This BlueTherm Probe transmits temperature data to
your Android, Windows CE mobile, iOS (179-200 only)
or Bluetooths wireless device via a secure connection.
Each unit will transmit temperature data up to a maximum
of twenty metres (line of sight).
®
The probe is specifically designed to eliminate the need
for wires and connectors which often cause many
traditional probes to break or fail.
The BlueTherm Probe incorporates a red and blue
LED. The flashing blue LED indicates Bluetooth comms
transfer, the red LED indicates on/off and power status.
®
Each probe is supplied with basic App software. A SDK is
also available on request. Alternative probes are available,
contact our sales office for more information.
order code
179-100
179-200
830-750
description
BlueTherm Probe - Android
BlueTherm Probe - iOS
protective silicone boot
fast response reduced tip
°C/°F
specification
range
resolution
accuracy
battery
battery life
sensor type
dimensions
probe dimensions
weight
BlueTherm™ Duo
BlueTherm Probe
-49.9 to 249.9 °C
0.1/1 °C/°F
±0.4 °C ±0.1 % of reading
1 x AAA NiMH Rechargeable
36 hours
K thermocouple
40 x 260 mm
Ø3.3 x 130 mm
90 grams
NEW
with Bluetooth wireless technology
®
l two channel type K thermocouple input
®
l visual display of high & low alarm status
The BlueTherm Duo transmits temperature data to your
Android, Windows CE mobile, iOS or Bluetooth wireless
device via a secure connection.
®
Each Duo measures and transmits temperature over the
range of -99.9 to 1372 °C with a 0.1 °C resolution. The
unit will securely transmit temperature data from one or
two probes up to a maximum of twenty metres (line of sight).
The unit incorporates a backlit LCD display, red and blue
LED. The flashing blue LED indicates Bluetooth comms
transfer, the red LED indicates on/off and power status.
®
Each BlueTherm Duo is supplied with basic App
software. ETI offer a wide range of interchangeable type
K thermocouple probes, see pages 12 to 15 for details.
order code description
292-601
BlueTherm Duo
830-210
protective silicone boot
the BlueTherm Duo is exclusive of probes
16
°C/°F
specification BlueTherm Duo
range
-99.9 to 1372 °C
resolution
0.1/1 °C/°F
accuracy
±0.4 °C ±0.1 % of reading
battery
1 x AA NiMH Rechargeable
battery life
36 hours
sensor type
K thermocouple (two channel)
display
10 mm LCD
dimensions
35 x 67 x 109 mm
weight
200 grams
FREE traceable certificate of calibration included
four channel interchangeable thermocouples
l prints on demand or at user set intervals
l 8000 readings per channel
l personalised hard copy print-out
l features real date/time clock
The PTR (Printing Temperature Recorder), printing thermometer
has been specifically designed to provide a cost effective way of
automatically measuring and recording temperature and time at
regular preset intervals. The PTR can save you time and money
as it can log temperatures unsupervised overnight, weekends or
during the normal working day.
The instrument is housed in a robust ABS case and incorporates
an easy to use keypad. The print functions can be operated
from the keypad on the PTR to provide a printed record of the
temperature measurements and the real time they were taken.
INDUSTRIAL THERMOMETERS
Printing Temperature Recorder
The PTR printing thermometer features an easy to read, LCD
display with low battery indication displaying temperature over
the range of -200 to 299.9 °C with a 0.1 °C resolution or 300
to 1372 °C with a 1 °C resolution.
The user, via the compatible software provided with the PTR,
can programme high and low alarms for each of the four input
channels, each channel can also be personalised with its own
label (maximum 12 characters) i.e. machine 1, machine 2 etc.
The software also allows the user to personalise the printed ticket
with a company name, address and logo.
At the end of each day or week, an audit trail, in the form
of a comma separated (.csv) or Excel (.xls) file, can be
downloaded from the PTR. Each unit is supplied with a
USB lead, battery charger, two rolls of paper, protective
boot and software, all supplied in a carrying case.
ETI offer a wide range of interchangeable type K
thermocouple probes, see pages 12 to 15 for details.
°C/°F
AUTO
OFF
specification
john davis
order code description
226-275
PTR printing thermometer
812-270
additional paper roll - single
832-757
stainless steel wall bracket
the PTR is exclusive of probes
Printing Temperature Recorder
range
-200 to 1372 °C
resolution
0.1 °C to 299.9 °C thereafter 1 °C
accuracy
±0.4 °C ± 0.1 %
memory
32000 or 4 x 8000 temperature readings
sample rate
1 minute to 255 minutes
battery
Ni-MH 3.6 volt
battery life
approximately 500 prints
sensor type
K thermocouple
display
12.7 mm LCD
dimensions
54 x 110 x 183 mm
weight
660 grams
FREE traceable certificate of calibration included
17
CALIBRATION EQUIPMENT
Reference Thermometers
±0.05 °C high system accuracy
l 5-point UKAS Certificate of Calibration included
l supplied complete with high accuracy probe
l temperature range -199.99 to 199.99 °C
l ideal for calibration comparison checks
The Reference thermometers are high accuracy PT100 instruments
that are supplied with a 5-point UKAS Certificate of Calibration.
Each certificate indicates deviations from standards at various
check points: -18, 0, 40, 70 and 100 °C. Special ranges may
be certified by arrangement with our UKAS calibration laboratory.
The Reference thermometers are ideal for comparison checking
the calibration and accuracy of other thermometers and
probes, when used in conjunction with a stable temperature
heat or chill source, see page 21. The instruments measure
temperature over the range of -199.99 to 199.99 °C with
a resolution of 0.01 °C and an accuracy of ±0.05 °C.
The units feature a simple on/off push button with
open circuit 'Err' and low battery indication, when
applicable. The Reference Plus thermometer incorporates
the additional features of a max/min and hold function.
The Reference thermometers are supplied with a permanently
attached, high accuracy probe incorporating a 1/10th
DIN PT100 sensor. The probe measures Ø3.3 x 130 mm
and is supplied with a one metre PVC lead.
0601
"A 5-point UKAS Certificate of Calibration is
included with each Reference thermometer"
°C
specification
Comparator
The Reference thermometer (above) is
being used in conjunction with an infrared
thermometer and the Comparator.
order code
222-055
222-063
814-132
18
description
Reference
Reference Plus
Comparator
range
resolution
accuracy
battery
battery life
sensor type
display
dimensions
weight
HOLD
MAX
MIN
AUTO
0FF
UKAS
Reference & Reference Plus
-199.99 to 199.99 °C
0.01 °C
±0.05 °C (-30 to 150 °C) ±0.1 °C (-50 to 200 °C)
3 x 1.5 volt AAA
2000 hours
PT100 1/10th DIN
10 mm LCD
25 x 56 x 128 mm
210 grams
a UKAS Certificate of Calibration is included
0.01 °C resolution, high accuracy thermometer
0601
l 5-point UKAS Certificate of Calibration included
l ideal for calibration comparison checks
l auto-power on/off facility
l one-handed operation
The Reference Thermapen thermometer is a high accuracy PT100
instrument that is supplied with a 5-point UKAS Certificate of
Calibration. Each certificate indicates deviations from standards at
various check points: -18, 0, 40, 70 and 100 °C. Special ranges may
be certified by arrangement with our UKAS calibration laboratory.
CALIBRATION EQUIPMENT
Reference Thermapen™
The Reference Thermapen thermometer is ideal for comparison
checking the calibration and accuracy of other thermometers
and probes, when used in conjunction with a stable temperature
heat or chill source, see page 21. The instrument measures
temperature over the range of -69.99 to 199.99 °C with a
resolution of 0.01 °C and an accuracy of ±0.07 °C.
The thermometer will power off automatically after ten minutes,
maximising battery life. This feature can be disabled if not required.
Both low battery (icon) and open circuit indication are displayed, when
applicable. Each Reference Thermapen is powered by two lithium
coin cell batteries with a minimum life expectancy of 1000 hours.
The Reference Thermapen incorporates a stainless steel,
liquid/penetration probe Ø3.3 x 108 mm, that conveniently
folds back through 180 degrees into the side of the instrument
when not in use.
supplied in a zip pouch
with belt strap
optional accessories
l protective
PVC wallet with belt strap (830-110)
l protective
silicone boot (830-260)
NEW glow in the dark protective silicone boot
l with magnets (830-265)
°C
AUTO
0FF
UKAS
specification
order code
description
222-213
Reference Thermapen
830-260
protective silicone boot
830-265
silicone boot - glow in dark
830-110
protective wallet
832-200
wall bracket
Thermapen is supplied in a zip pouch (830-001)
Reference Thermapen
range
-69.99 to 199.99 °C
resolution
0.01 °C
accuracy
±0.07 °C (-30 to 149.99 °C) otherwise ±0.2 °C
battery
2 x 3 volt CR2032 lithium coin cell
battery life
1000 hours
sensor type
PT100
display
12 mm LCD
dimensions
19 x 47 x 153 mm
weight
97 grams
a UKAS Certificate of Calibration is included
19
CALIBRATION EQUIPMENT
MicroCal 1 & 1 Plus Calibrator
simulator or simulator & thermometer
l two models - simulator or simulator/thermometer
l 12 adjustable temperature points
l for frequent checking of thermometer accuracies
l tests thermocouple type K, J, T, R, N, S & E thermometers
The MicroCal 1 and 1 Plus thermocouple simulators help ensure that the
frequent checking of thermometer accuracies is a routine operation. Both
instruments are designed to simulate a chosen temperature to test thermocouple
type K, J, T, R, N, S and E thermometers without the need for specialised
equipment or conversion tables. The MicroCal 1 Plus also measures and
simulates temperature.
Both models feature a custom 10 mm LCD display with alpha-numeric display
line to prompt the user when changing parameters. Selectable parameters
include: °C/°F, auto-power off - enable/disable, CJC - internal/external and
display contrast adjustment.
An optional lead set is also available, that comprises of seven leads, one for
each thermocouple type K, J, T, R, N, S and E. Each PVC lead is one metre
long and incorporates two miniature thermocouple plugs.
Each MicroCal is supplied with a one metre PVC type K thermocouple lead
with miniature connectors and a five-point UKAS Certificate of Calibration.
Each certificate indicates deviations from standards at the various points.
thermocouple type K - range -200
thermocouple type J - range -200
thermocouple type T - range -270
thermocouple type R - range 0
thermocouple type N- range -200
thermocouple type S - range 0
thermocouple type E - range -140
to
to
to
to
to
to
to
1372 °C
1200 °C
400 °C
1768 °C
1300 °C
1768 °C
1000 °C
"A 5-point UKAS Certificate of Calibration is
included with each MicroCal simulator"
0601
°C/°F
specification
order code
20
271-100
271-101
816-100
830-205
description
MicroCal 1
MicroCal 1 Plus
lead set (7 types)
protective PVC boot
AUTO
0FF
UKAS
MicroCal 1 & MicroCal 1 Plus
range
(see table above)
temp points
12 adjustable presets
accuracy
±0.3 °C (dependent upon thermocouple type)
battery
2 x 1.5 volt AAA alkaline
battery life
300 hours
sensor type
thermocouple type K, J, T, R, N, S & E (selectable)
display
custom LCD
dimensions
35 x 73 x 141 mm
weight
220 grams
a UKAS Certificate of Calibration is included
small & lightweight calibrators
l portable temperature heat source
l ideal for checking the accuracy of thermometers
The 3000 dry-well calibrators are small and lightweight
heat sources, ideal for checking the accuracy of digital
thermometers and temperature probes. The units have a
temperature range of 33 to 300 °C with a resolution of 0.1 °C.
The dry-wells offer a high level of stability (±0.5 °C) and
a stabilisation time of five minutes. Plug it in, switch it on,
set the verification temperature with the front panel buttons
and insert your probe into the correct size well. Compare
the temperature reading of your thermometer against the
display and the difference is the error.
The 3001 dry-well will accept probe sizes Ø3.3, 4, 4.76 and
6.35 mm. The 3002 dry-well will accept probe sizes Ø3.3,
4.76, 6.35 and 9.6 mm. The 3003 dry-well will accept probe
sizes Ø4.76 and 12.7 mm.
order code
271-301
271-302
271-303
description
3001 dry-well
3002 dry-well
3003 dry-well
°C/°F
specification 3000 series dry-wells
range
33 to 300 °C
resolution
0.1 °C
accuracy
±0.5 °C (33 to 199.9 °C)
±1 °C (200 to 300 °C)
heating time
ambient to 300 °C after 10 mins
well depth
100 mm
power
230 volt AC (115 volt available)
dimensions
57 x 125 x 158 mm
weight
900 grams
FREE traceable certificate of calibration included
CALIBRATION EQUIPMENT
3000 Series Dry-Well
3101 Dry-Well
heat/cool source calibrator
l accepts a wide variety of probe diameters
l ideal for checking the accuracy of thermometers
The 3101 dry-well features an easy to read LED display with
a temperature range of -10 to 110 °C with a resolution of
0.1 °C. Heating time, ambient to 100 °C or cooling time,
ambient to 0 °C is 10 minutes for both.
The 3101 is excellent for checking the calibration of a wide
range of instrumentation including digital thermometers and
temperature probes that need calibration checks, either below
or above ambient temperature. The unit incorporates two
removable wells/inserts, both Ø13 mm in diameter and will
accept probe sizes Ø3.3, 4.1, 4.8, 6.4 and 9.6 mm. Each
3101 is supplied with two inserts of the customer's choice.
order code
271-401
271-321
271-322
271-323
271-324
271-325
description
3101 dry-well
Ø3.3 mm ID brass insert
Ø4.1 mm ID brass insert
Ø4.8 mm ID brass insert
Ø6.4 mm ID brass insert
Ø9.6 mm ID brass insert
°C/°F
specification 3101 dry-well
range
-10 to 110 °C
resolution
0.1 °C
accuracy
±0.5 °C (-10 to 99.9 °C)
±1 °C (100 to 110 °C)
heating time
ambient to 100 °C after 10 mins
cooling time
ambient to 0 °C after 10 mins
well depth
100 mm
power
230 volt AC (115 volt available)
dimensions
89 x 152 x 186 mm
weight
1800 grams
FREE traceable certificate of calibration included
21
INDUSTRIAL THERMOMETERS
Precision PT100 Thermometers
0.1 °C or 0.01 °C resolution with a high accuracy
l high accuracy ±0.2 °C or 0.05 °C
l max/min memory function
l interchangeable PT100 probes
l FREE certificate of calibration included
High accuracy is one of the outstanding features of the Precision thermometers.
There are two models available, the Precision and Precision Plus. The
Precision measures temperature over the range of -199.9 to 499.9 °C
with a 0.1 °C resolution and high accuracy of ±0.2 °C. The Precision
Plus measures temperature over the range of -199.99 to 199.99 °C with a
0.01 °C resolution and high accuracy of ±0.05 °C. Please note: the
accuracies quoted are for the instruments only.
Conveniently located on the front of the instrument are the on/off, max/min
and display hold buttons. The Binder probe socket is positioned at the top of
the instrument which enables a variety of probes to be used depending on the
application.
The Precision thermometers feature a large, easy to read, LCD display with open
circuit 'Err' and low battery indication. Each thermometer is powered by three 1.5 volt
AAA batteries that gives a minimum of 2000 hours battery life. The units will power off
automatically after ten minutes, maximising battery life. This feature can be disabled by
the user, if required.
ETI offer a range of interchangeable PT100 Class A probes for use with the Precision
thermometer, see page 56 for full details. The Precision Plus is supplied with a 160-222
PT100 1/10th DIN liquid probe and a UKAS Certificate of Calibration.
For regularly checking the accuracy of each Precision thermometer, a range of
calibration PT100 test caps complete with a UKAS Certificate of Calibration
are available - visit our website or contact our sales office for more
information on specification and prices.
optional accessories
l protective silicone boot - the Precision/
Precision
Plus
thermometers
are
waterproof to IP63 when used in
conjunction with this boot (830-251)
l stainless
steel wall bracket (screws not
supplied) and protective silicone boot
(832-050)
l UniWipes - ideal for cleaning probes
and everyday work surfaces (836-030)
order code description
22
222-053
Precision thermometer
222-051
Precision Plus thermometer
830-251
protective silicone boot
832-050
s/steel wall bracket & boot
222-053 Precision is exclusive of probe
222-051 Precision Plus is inclusive of probe
°C
HOLD
MAX
MIN
AUTO
0FF
specification Precision
Precision Plus
range
-199.9 to 499.9 °C
-199.99 to 199.99 °C
resolution
0.1 °C 0.01 °C
accuracy
±0.2 °C ±0.05 °C
battery
3 x 1.5 volt AAA
battery life
2000 hours
sensor type
PT100
display
10 mm LCD
dimensions
25 x 56 x 128 mm
weight
130 grams
222-053 Precision includes a traceable certificate of calibration
222-051 Precision Plus includes a UKAS Certificate of Calibration
for use with the Precision 0.1 °C thermometer
order code
penetration probe
This stainless steel penetration probe is strong and versatile,
ideal for measuring liquids and semi-solids accurately in a
variety of applications. Response time less than four seconds.
Probe temperature range -50 to 200 °C.
160-160
This stainless steel air or gas probe is ideal for measuring
air or gas temperatures accurately in rooms and
ducts in HVAC and industrial applications. Response
time less than four seconds. Probe temperature range
-50 to 200 °C.
160-300
This heavy duty, stainless steel, between pack probe is
strong and versatile, designed to accurately measure
between packets/boxes of produce. Response time less than
14 seconds. Probe temperature range -50 to 200 °C.
160-060
This liquid probe features a rigid, stainless steel stem with
a flat tip. The probe is suitable for accurate temperature
measurement in a wide variety of laboratory applications.
Response time less than four seconds. Probe temperature
range -50 to 200 °C.
160-220
This FEP insulated air or gas wire probe is ideal for measuring
air or gas temperatures accurately in a variety of HVAC and
industrial applications. Response time less than four seconds.
Probe temperature range -50 to 200 °C.
160-372
Ø3.3 x 130 mm
air or gas probe
Ø4.5 x 130 mm
between pack probe
TEMPERATURE PROBES
PT100 Class A Temperature Probes
Ø6 x 130 mm
liquid probe
Ø3.3 x 130 mm
air or gas wire probe
Ø3.7 x 30 mm with 1000 mm FEP lead
PT100 1/10 DIN Temperature Probes
for use with the Precision Plus 0.01 °C thermometer
order code
liquid probe
Ø3.3 x 130 mm
liquid probe
Ø4.8 x 250 mm with 2 m PTFE lead
This hand held liquid probe features a rigid, stainless
steel stem with a flat tip. The probe is suitable for
high accuracy temperature measurement in a wide
variety of laboratory applications. Response time
less than four seconds. Probe temperature range
-50 to 200 °C.
160-222
This liquid probe features a rigid, stainless steel stem
with a flat tip. The probe is suitable for high accuracy
temperature measurement in a wide variety of
laboratory applications. Response time less than ten
seconds. Probe temperature range -50 to 200 °C.
160-446
23
INFRARED THERMOMETERS
TN1 Infrared Thermometer
with max/min function
The TN1 is a non-contact infrared thermometer.
Simply aim the thermometer at the target
and press the measurement button to display
the surface temperature instantly. The TN1
indicates temperature over the range of -32.9 to
219.9 °C with a resolution of 0.1 °C and is
switchable between °C/°F.
Each unit incorporates maximum and minimum
temperature functions together with an autopower off facility that automatically turns the
instrument off after fifteen seconds, maximising
battery life. The TN1 also includes a lock function
for continuous temperature measurement.
The distance to target ratio is 1:1 and therefore
the thermometer should be positioned as close
to the target as possible. The default emissivity
is 0.95 but can be changed from 0.01 to 1.
order code
814-050
description
TN1 infrared thermometer
°C/°F
MAX
MIN
AUTO
0FF
specificationTN1
range
resolution
accuracy
field of view
emissivity
battery
battery life
display
dimensions
weight
-32.9 to 219.9 °C
0.1 °C/°F
±2 % of reading or ±2 °C whichever is greater
target ratio 1:1
0.95 default - adjustable 0.01 to 1 emissivity
3 volt CR2032 lithium coin cell
40 hours continuous use
custom LCD
18 x 37 x 68 mm
32 grams
TN2 Infrared Thermometer
with laser alignment & max/min function
The TN2 infrared thermometer incorporates
laser alignment. Simply aim the TN2 at the
target and press the read button to display the
surface temperature instantly over the range
of -32.9 to 249.9 °C with a resolution of
0.1 °C/°F (switchable).
The distance to target ratio is 6:1 and therefore
the thermometer should be positioned as close
to the target as practical without touching.
Each unit incorporates maximum and minimum
temperature functions together with an autopower off facility that automatically turns the
instrument off after fifteen seconds, maximising
battery life. The TN2 also includes a lock function
for continuous temperature measurement.
order code description
814-055
TN2 infrared thermometer
24
°C/°F
MAX
MIN
AUTO
0FF
specificationTN2
range
resolution
accuracy
field of view
emissivity
battery
battery life
display
dimensions
weight
-32.9 to 249.9 °C
0.1 °C/°F
±2 % of reading or ±2 °C whichever is greater
target ratio 6:1
0.95 default - adjustable 0.01 to 1 emissivity
3 volt CR2032 lithium coin cell
40 hours continuous use
custom LCD
18 x 50 x 100 mm
62 grams
infrared thermometer
NEW
l temperature range -50 to 330 °C
l compact, lightweight & easy to use
l laser dot alignment
l target ratio 12:1
The Mini RayTemp infrared thermometer is a compact, lightweight and low cost
infrared thermometer. Simply aim and pull the trigger to display the temperature
of the item being measured.
This infrared thermometer measures temperature over the range of -50 to 330 °C
with an assured accuracy of ±2 °C over the range of 0 to 330 °C, outside of
this range (-50 to 0 °C) accuracy is ±4 °C.
INFRARED THERMOMETERS
Mini RayTemp™
The Mini RayTemp has a clear, easy to read, LCD display with low battery,
backlight indication and an auto-power off facility that turns the instrument off
after 10 seconds, maximising battery life. This thermometer is ideal for
numerous temperature measurement applications where contact with the item
to be measured is an issue.
The thermometer also incorporates laser assisted alignment as standard,
to assist in pin-pointing the area of measurement. The unit incorporates a
12:1 optic ratio (target distance/diameter ratio) and a fixed emissivity of 0.95
making it suitable for a wide range of industrial applications.
optional accessories
l
protective nylon pouch with belt strap (830-040)
l
Comparator (814-132)
low cost calibration checker
The Comparator provides an inexpensive
way of checking the temperature of
infrared thermometers when used in
conjunction with a Reference thermometer,
see pages 18 or 19 for details.
°C/°F
specification
order code
814-080
830-040
814-132
description
Mini RayTemp
protective nylon pouch
Comparator
range
resolution
accuracy - infrared
field of view
emissivity
battery
battery life
display
dimensions
weight
AUTO
0FF
Mini RayTemp
-50 to 330 °C
0.1 °C/°F
±2 °C (0 to 330 °C) otherwise ±4 °C
target ratio 12:1
0.95 fixed
9 volt PP3
80 hours continuous use
custom LCD
36 x 88 x 131 mm
130 grams
25
INFRARED THERMOMETERS
RayTemp™ 8 Infrared Thermometer
with type K thermocouple socket
l temperature range IR -60 to 500 °C, probe -64 to 1370 °C
l includes differential & average temperatures
l two-in-one instrument
l target ratio 12:1
The RayTemp 8 portable gun-shaped infrared thermometer is compact, lightweight and
easy to use. Simply aim and pull the trigger to display the temperature of the item being
measured. The thermometer displays temperature over the range of -60 to 500 °C.
The instrument has a clear, easy to read, LCD display with low battery indication. The
RayTemp 8 incorporates an auto-power off facility that turns the instrument off after 60
seconds, maximising battery life. The unit features a laser dot alignment for ease of use.
The RayTemp 8's four-button keypad, allows the user to select °C/°F and max/min. Additionally,
the difference between the max and min temperature and the average temperature can
be displayed.
two instruments in one
The RayTemp 8 infrared thermometer incorporates a miniature thermocouple
type K probe socket that enables a wide range of type K thermocouple probes
to be used for a variety of temperature measurement applications, including
air, liquid and surface temperatures. For details of compatible type K
thermocouple probes, see pages 12 to 15.
RayTemp 8 kit
The RayTemp 8 together with a penetration probe is
available as a kit complete with FREE tub of UniWipes
and FREE ABS carrying case.
each kit contains:
l RayTemp
l penetration
l tub
l ABS
°C/°F
specification
order code description
26
814-045
RayTemp 8
860-845
RayTemp 8 kit
830-040
protective pouch
834-740
ABS carrying case
the RayTemp 8 is exclusive of probe
8 infrared thermometer (814-045)
probe (123-160)
of 40 UniWipes (836-032)
carrying case (834-740)
MAX
MIN
AUTO
0FF
RayTemp 8
range - infrared -60 to 500 °C
range - probe
-64 to 1370 °C
resolution
0.1 °C/°F (-9.9 to 199.9 °C) or 1 °C
accuracy - infrared±2 % of reading or ±2 °C whichever is greater
accuracy - probe ±1 % of reading or ±1 °C whichever is greater
field of view
target ratio 12:1
emissivity
0.95 default - adjustable 0.10 to 1.00
battery
2 x AAA alkaline
battery life
180 hours continuous use
display
custom LCD
dimensions
39 x 72 x 175 mm
weight
180 grams
ideal for high temperature applications
l target ratio 50:1 for measuring small targets
l wide temperature range -59.9 to 999.9 °C
l auto-power off & backlight facilities
l robust housing for durability
The RayTemp 38 is a professional infrared, gun-shaped, non-contact
thermometer with dual laser dot alignment. The thermometer
incorporates a 50:1 optic ratio (target distance/diameter ratio), this enables
users to measure small targets from a distance. The user stands a safe and
comfortable distance from the target, points the thermometer at the surface to be
measured, pulls the trigger and instantly reads the temperature. Ideal for measuring
the temperature of any other item that is difficult to reach. This enables the user to
measure most surfaces accurately and quickly.
INFRARED THERMOMETERS
RayTemp™ 38 Infrared Thermometer
This infrared thermometer measures the surface temperature over the range of -59.9 to
999.9 °C with a 0.1 °C/°F resolution. The RayTemp 38 incorporates an auto-power
off facility that turns the instrument off after 60 seconds, this function can be disabled,
if required. Each unit incorporates a backlit custom LCD display that indicates both the
temperature and the emissivity. The thermometer features a four-button keypad, allowing
the user to select the mode required, i.e. max, min, differential and average temperatures, view
the max/min high and low alarms and adjust the emissivity from 0.1 to 1.0 in 0.01 increments
(default set at 0.95).
The RayTemp 38 is two instruments in one as it incorporates a thermocouple socket that will
accept a type K thermocouple probe, see pages 12 to 15 for available probes. Each RayTemp
38 is supplied in a protective ABS carrying case. An optional strong magnetic holder is also
available. The holder screws into the bottom of the thermometer's housing, allowing the
unit to be mounted onto a metal surface for continuous monitoring.
magnetic holder
°C/°F
specification
order code description
814-038
RayTemp 38
814-150
magnetic holder
the RayTemp 38 is exclusive of probe
range
resolution
accuracy - infrared
field of view
emissivity
battery
battery life
display
dimensions
weight
MAX
MIN
AUTO
0FF
RayTemp 38
-59.9 to 999.9 °C
0.1 °C/°F
±2 % of reading or ±2 °C whichever is greater
target ratio 50:1
0.95 default, 0.1 to 1.0 adjustable in 0.01 increments
2 x AAA alkaline
180 hours continuous use
custom LCD with backlight
47 x 197 x 203 mm
386 grams
27
DATA-LOGGERS
ThermaData™ Logger
recording thermometers
l waterproof housing offering IP66/67 protection
l temperature range -40 to 85 °C or 125 °C
l resolution 0.1 °C, high accuracy ±0.5 °C
l meets EN 12830, S & T , C & D, 1
The ThermaData logger mk II series consists of a comprehensive
range of portable data-loggers utilising the latest in electronic
technology. The ThermaData loggers are housed in waterproof,
ergonomic cases that are designed to meet IP66/67 protection.
The ThermaData logger mk II range offers the choice of either blind
data-loggers or data-loggers with a LCD display. Other options
include internal and external temperature sensors/probes. The
external probes can be either fixed or detachable via a waterproof
three-pin connector. The remote temperature probes are supplied
with either a one or three metre (where stated) PVC/PFA (fixed) or
PUR/PVC (detachable) lead.
Each logger incorporates a red and green LED, the flashing green
LED indicates that the logger is active/logging and the flashing
red LED indicates that your customised preset alarms have been
exceeded. For details of the range of loggers, see overleaf.
ThermaData logger PC software
The ThermaData logger is connected to a PC via a USB cradle. By selecting the relevant icon the data can be
downloaded and displayed either as a graph, table or summary. The information can be analysed by zooming
in, storing to disc or exporting as a text (.txt) or Excel (.xls) file to other software packages.
The ThermaData logger software incorporates several useful functions, including the ability to display two traces
on a graph, the trace colours are user selectable. All files can be viewed as thumbnail icons for easy identification.
The ThermaData logger software will work equally with all
ThermaData loggers except the RF version. The software is
both powerful and sophisticated, yet user-friendly enabling
temperature data to be organised and analysed to provide
management information. The software allows the user to
programme the logging sample/interval rate (0.1 to 255
minutes), the real-time clock, °C or °F, delayed start (maximum
23 hours, 59 minutes) or select a magnetic start option. It is
also possible to include a 32-character user ID for each logger.
By selecting continuous logging in the software options, it is
possible to start the ThermaData logger only once and never
have to reset its parameters again, even if downloaded regularly.
Unlike most low cost loggers, the ThermaData logger will
continue recording during and after downloading the data.
The ThermaData logger software is supplied with each USB
cradle. Please note: when initially ordering loggers it is
necessary to order at least one ThermaData logger cradle.
°C/°F
28
MAX
MIN
IP66/67
blind with an internal sensor
ThermaData logger - model TD
LCD with an internal sensor
This logger incorporates
an internal NTC thermistor
sensor that measures over
the range of -40 to 85 °C
and can record up to 4000
readings.
This logger incorporates
an internal NTC thermistor
sensor that measures over
the range of -30 to 85 °C
and can record up to 4000
readings.
order code description
295-001
model TB
order code description
296-001
model TD
ThermaData logger - model TBF
ThermaData logger - model TDF
blind logger with an external fixed sensor
LCD with an external fixed sensor
This logger incorporates
an external NTC thermistor
probe with a one metre
PVC/PFA lead that measures
over the range of -40 to
125 °C and can record up
to 4000 readings.
This logger incorporates
an external NTC thermistor
probe with a one metre
PVC/PFA lead that measures
over the range of -40 to
125 °C and can record up
to 4000 readings.
order code description
295-101
model TBF
order code description
296-101
model TDF
ThermaData logger - model TDC
USB cradle, software & start magnet
LCD with an external sensor with connector
This logger cradle is
supplied complete
with
ThermaData
logger PC software
and a start magnet.
This logger incorporates
an external NTC thermistor
sensor with a one metre
PUR/PVC lead and probe
connector that measures
over the range of -40 to
125 °C and can record up
to 4000 readings.
order code
296-501
description
model TDC
DATA-LOGGERS
ThermaData logger - model TB
Each USB cradle is
supplied with a one metre
PVC lead.
order code
293-804
description
cradle, software & start magnet
optional accessories
Loggers are supplied with a
white seal as standard, however
coloured seals are available in
packs of seven colours: black,
blue, brown, green, red, white
and yellow. This allows for colourcoding in various applications.
An optional protective silicone
boot is also available.
order code description
830-270
protective silicone boot
296-990
coloured seals - pack of 7
specification
all models
range - internal -30/-40 to 85 °C - model dependant
range - external -40 to 125 °C - model dependant
resolution
0.1 °C
accuracy
±0.5 °C
memory
4000 or 2 x 2000 readings
sample rate
0.1 to 255 minutes
battery
3.6 volt ½ AA lithium
battery life
approximately 18 months
display - blind
2 LED's
display - LCD 10 mm LCD/2 LED's
dimensions
Ø76 x 23 mm
weight
71 to 113 grams - model dependant
29
DATA-LOGGERS
ThermaData™ Logger
blind recording thermometers
l blind recording thermometer & data-logger
l visual display shows if limits are exceeded
l customised high/low alarm facility
l temperature range -40 to 85 °C
The ThermaData logger is a cost effective, self-contained temperature data-logger or blind recording thermometer
that is designed to record the temperature of the surrounding environment. The ThermaData logger is housed in a
water-resistant polyethylene case and incorporates two LED status indicators.
The ThermaData logger software allows the user to programme the logging sample/interval rate (1 to 255 minutes),
the real-time clock, °C/°F, delayed start (maximum 23 hours, 59 minutes) or push-button start and a 12-character
user ID. The software also incorporates a password protected calibration adjustment feature that allows the user to
check the calibration of loggers and make minor adjustments 0.5 °C (±3 °C).
By selecting continuous logging in the software options, it is possible to start the ThermaData logger only once and
never have to reset its parameters again, even if downloaded regularly. Unlike most low cost loggers, the ThermaData
logger will continue recording during and after downloading the data.
The user can also set, within the software, high and low alarm values for a specific application. A push of the button
will allow a simple visual inspection of the unit to show if either of these limits has been exceeded. A flashing red
LED will warn the user that the alarm limits have been exceeded (reject) or a flashing green LED will advise the user
that the alarm limits have not been exceeded (accept).
ThermaData logger PC software
The ThermaData logger is connected to a PC via a serial or USB port lead. By selecting the relevant icon the
data can be downloaded and displayed either as a graph, table or summary. The information can then be
analysed by zooming in, storing to disc or exporting to other software packages.
colour-coded data-loggers
The ThermaData loggers are available in a variety of coloured
cases; blue, white, yellow, green, red, brown and black. The
colour-coded cases help to prevent cross-contamination by
allowing the user to allocate a colour to a specific product or
application.
Other applications include different coloured loggers for easy
identification in, eg. storage areas and the building and
construction industry where loggers can often blend in with the
environment.
°C/°F
order code
30
293-001
293-105
293-205
293-305
293-405
293-605
293-701
293-005
293-101
293-104
description
ThermaData logger - blue
ThermaData logger - white
ThermaData logger - yellow
ThermaData logger - green
ThermaData logger - red
ThermaData logger - brown
ThermaData logger - black
ThermaData logger - blue - box of 10
software & RS232 serial lead
software & USB lead
specification
range
resolution
accuracy
memory
sample rate
battery
battery life
dimensions
weight
MAX
MIN
ThermaData logger
-40 to 85 °C
0.5 °C
±1 °C (±0.5 °C with calibration utility)
2048 temperature readings
1 minute to 255 minutes
3.6 volt ½ AA lithium
minimum 3 years
Ø55 x 25 mm
45 grams
blind recording thermometers
l high temperature range -20 to 105 °C
l food grade 316 stainless steel housing
NEW
l integral USB interface for setup and download
l two models available with or without probe
DATA-LOGGERS
Stainless Steel ThermaData™Logger
These new stainless steel data-loggers are ideal for a variety of
applications including industrial and pharmaceutical where a high
temperature data-logger is required. The ThermaData logger is
housed in a water resistant, food grade 316 stainless steel case
to protect the logger from corrosion, impact and moisture (IP67).
The ThermaData logger software allows the user to programme
the logging sample/interval rate (1 to 255 minutes), the real-time
clock, °C/°F, delayed start (maximum 23 hours, 59 minutes) and a
12-character user ID. The software also incorporates a password
protected calibration adjustment feature that allows the user to
check the calibration of loggers and make minor adjustments
0.5 °C (±3 °C).
By selecting continuous logging in the software options, it is possible to start the ThermaData logger only once and
never have to reset its parameters again, even if downloaded regularly. Unlike most low cost loggers, the ThermaData
stainless steel logger will continue recording during and after downloading the data.
Two models of the ThermaData logger are available, with or without a probe (probe Ø3.3 x 50 mm). Each logger
is supplied with a two metre USB lead and ThermaData logger software.
ThermaData logger software
The ThermaData logger is connected to a PC
via the internal USB connector or a USB lead
(supplied). By selecting the relevant icon the
data can be downloaded and displayed either
as a graph, table or summary. The user can
also set, within the software, high and low alarm
values for a specific application. The information
can then be analysed by zooming in, storing to disc
or exporting to other software packages.
USB Connection Point
Simply remove the end cap to
access the USB port. This allows
the user to connect the logger to a
PC and upload any data collected.
order code description
293-900
stainless steel logger - w/out probe
293-930
stainless steel logger - with probe
supplied with a two metre USB lead &
ThermaData logger software
°C/°F
specification
range
resolution
accuracy
memory
sample rate
battery
battery life
dimensions
weight
MAX
MIN
IP66/67
S/Steel ThermaData logger
-20 to 105 °C
0.5 °C
±1 °C (±0.5 °C with calibration utility)
2048 temperature readings
1 minute to 255 minutes
3.6 volt 2/3 AA lithium
minimum 3 years
Ø22.5 x 129 mm (excluding probe)
170 grams
31
DATA-LOGGERS
RF ThermaData™ Loggers
wireless temperature monitoring
l SMS text facility alerts user when limits are exceeded
l reduces time spent taking manual readings
l up to 16 loggers can be monitored
l RF wireless temperature recording
The RF ThermaData wireless loggers consist of a comprehensive range of portable
data-loggers utilising the latest in electronic technology. The loggers are a battery powered,
cost-effective, temperature monitoring system that records remotely the temperature of appliances and buildings.
Via radio frequency each logger can transmit the recorded data to a receiver connected to a PC, laptop or tablet.
The RF ThermaData wireless data-logging system consists of a number of RF (wireless) data-loggers, a RF base
station connected to a PC and software which enables the user to upload data or download programme information
to each logger. The RF loggers are housed in a waterproof, ergonomic case that is designed to meet IP66/67
protection. Each RF logger is a self-contained, battery powered unit that can receive, log, store and transmit data
to the RF receiver.
The loggers have a range of up to 100 metres (line of sight), and up to a maximum of 16 ThermaData wireless
loggers can be utilised at any one time. Each logger incorporates a red and green LED, the flashing green LED
indicates that the logger is active/logging and the flashing red LED indicates that your customised preset alarms
have been exceeded.
Options include internal and external temperature sensor/probe/s. The external probes can be either fixed or
detachable via a waterproof three-pin connector. The remote temperature probes are supplied with either a one or
three metre PVC/PFA (fixed) or PUR/PVC (detachable) lead.
ThermaData Studio Software
laptop not
included
°C/°F
IP66/67
specification
RF range
display
radio frequency
power source
current consumption
antenna
antenna dimensions
dimensions
weight
RF ThermaData Base Station
<100 metres (line of sight)
2 LED's
868 MHz (licence free)
USB connection
<100 mA
50 Ω half wave single band
Ø11 x 230 mm
27 x 57 x 87 mm
115 grams
order code description
293-805
RF ThermaData Base Station
supplied with a two metre USB lead, start magnet
& ThermaData Studio Software
32
The ThermaData Studio Software is both powerful and
sophisticated, yet user-friendly, enabling temperature
data to be organised and analysed to provide
management information.
The ThermaData Studio Software has the ability to
display up to 32 traces on a graph, the trace colours
are user selectable. All files can be viewed as
thumbnail icons for easy identification.
The software allows the user to programme the logging
sample/interval rate (0.1 to 255 minutes), the real-time
clock, °C or °F, delayed start (maximum 23 hours,
59 minutes) or select a manual start option. It is also
possible to include a 32-character user ID for each
logger.
RF Wireless logger - model WTBC
blind with an internal sensor
blind with an external sensor with connector
This logger incorporates an
external NTC thermistor
sensor with a one metre
PUR/PVC lead and probe
connector that measures
over the range of -40 to
125 °C and can record up
to 16000 readings.
This logger incorporates
an internal NTC thermistor
sensor that measures over
the range of -40 to 85 °C
and can record up to 16000
readings.
order code description
297-001
model WTB
order code description
297-501
model WTBC
RF Wireless logger - model WTBF
RF Wireless logger - model WTB1C
blind with an external fixed sensor
blind with an internal & external sensor with connector
This logger incorporates
both an internal and external
NTC thermistor probe with
a one metre PUR/PVC lead
and probe connector that
measures over the range
of -40 to 85 or 125 °C
(external) and can record
up to 2 x 8000 readings.
This logger incorporates
an external NTC thermistor
probe with an optional one
or three metre PVC/PFA
lead that measures over the
range of -40 to 125 °C and
can record up to 16000
readings.
order code description
297-101
model WTBF - 1000 mm lead
297-103
model WTBF - 3000 mm lead
297-051
RF Wireless logger - model WTB1F
RF Wireless logger - model WTB2F
order code
blind with an internal & external fixed sensor
description
model WTB1C
blind with two external fixed sensors
This logger incorporates
two external fixed NTC
thermistor probes with two
one or three metre PVC/
PFA leads that measure over
the range of -40 to 125 °C
and can record up to 2 x
8000 readings.
This logger incorporates
both an internal and external
NTC thermistor probe with
optional one or three metre
PVC/PFA lead that measure
over the range of -40 to 85
or 125 °C (external) and can
record up to 2 x 8000 readings.
order code
297-011
297-013
order code
description
model WTB1F - 1000 mm lead
model WTB1F - 3000 mm lead
297-111
297-113
optional accessories
Loggers are supplied with a white seal,
however coloured seals are available
in packs of seven colours: black,
blue, brown, green, red, white
and yellow. This allows
c o l o u r- c o d i n g f o r
various applications.
A protective silicone
boot is also available.
order code description
296-990
coloured seals - pack of seven
830-270
protective silicone boot
DATA-LOGGERS
RF Wireless logger - model WTB
description
model WTB2F - 1000 mm lead
model WTB2F - 3000 mm lead
specification
range internal
range external
resolution
accuracy
memory
sample rate
antenna
RF range
transmission rate
radio frequency
battery
battery life
display
dimensions
weight
all models
-40 to 85 °C
-40 to 125 °C
0.1 °C or °F - user selectable
±0.5 °C
16000 or 2 x 8000 readings
0.1 to 255 minutes
internal 50 W omni-directional chip
<100 metres line of sight
0.1 to 255 minutes
868 MHz (licence free)
3.6 volt ½ AA lithium
approx. 18 months
2 LED's
Ø76 x 23 mm
80 grams approx. - model dependant
Please note: the above loggers require a RF ThermaData Base Station (293-805) to communicate with a PC
33
DATA-LOGGERS
Thermocouple ThermaData™ Logger
for high temperature applications
l waterproof housing offering IP66/67 protection
NEW
l wide temperature range -99.9 to 1372 °C
l two channel type K thermocouple input
l visual display of high & low alarm status
These two input Thermocouple ThermaData loggers are
housed in a waterproof, ergonomic case that is designed to
meet IP66/67 protection. Two models are available, either
blind or with LCD display.
The ThermaData loggers measure temperature over the
range of -99.9 to 1372 °C with a 0.1 °C resolution,
auto-ranging to 1 °C over the range of 301 to 1372 °C.
At programmable intervals the loggers will record the
temperature, up to a maximum of 16000 readings or 2 x
8000 readings.
Each logger incorporates a red and green LED, the flashing
green LED indicates that the logger is active/logging
and the flashing red LED indicates that your customised
pre-set alarms have been exceeded. Each logger is supplied
with a USB lead and ThermaData Studio Software.
For details of the wide range of type K thermocouple probes
available, see pages 12 to 15.
ThermaData logger PC software
ThermaData Studio Software
The ThermaData logger is connected to a PC via a
serial or USB port lead. By selecting the relevant icon
the data can be downloaded and displayed either
as a graph, table or summary. The information can
then be analysed by zooming in, storing to disc or
exporting to other software packages.
USB Connection Point
Simply remove the end cap
to access the USB port. This
allows the user to connect the
logger to a PC via the USB
lead (supplied) and upload
the temperature readings
collected.
order code description
291-501
T/C ThermaData Logger - blind
292-501
T/C ThermaData Logger - LCD
830-210
protective silicone boot
T/C ThermaData Loggers are exclusive of probes
34
°C/°F
specification
IP66/67
T/C ThermaData Logger
range
-99.9 to 1372 °C
resolution
0.1 °C to 300 °C thereafter 1 °C
accuracy
±0.4 °C ±0.1 % of reading
memory
16000 or 2 x 8000 readings
battery
AA Tadiran - Li-SOCl
battery life
3 years @ 20 °C
sensor type
K thermocouple
display
10 mm LCD
dimensions
35 x 67 x 109 mm
weight
200 grams
FREE traceable certificate of calibration included
DATA-LOGGERS
ThermaData™ Loggers
humidity & temperature recording meters
l display toggles between humidity & temperature
l visual display of high & low alarm status
l records up to a maximum of 16000 readings
l choice of internal or remote sensors
The humidity and temperature ThermaData loggers measure
and record both temperature and relative humidity (%rh) over
the range of -20 to 85 °C and 0 to 100 %rh. At programmable
intervals, the loggers will record simultaneously both temperature
and humidity, recording up to a maximum of 16000 readings
(8000 humidity and 8000 temperature).
The ThermaData loggers offer the choice of either a blind logger
or an LCD display logger, both options include an internal or
external humidity and temperature sensor with a one metre lead.
Each logger incorporates two LED's, a flashing green LED indicates
that the logger is active/logging and a flashing red LED indicates
that your customised preset alarms have been exceeded.
The humidity and temperature ThermaData loggers are suitable
for a diverse range of applications which include HVAC climate
monitoring, QA monitoring of storage areas etc.
ThermaData logger PC software
The ThermaData logger is connected to
a PC via a USB cradle. By selecting the
relevant icon the data can be downloaded
and displayed either as a graph, table
or summary. The information can be
analysed by zooming in, storing to
disk or exporting to Excel (.xls) or as a
text (.txt) file to other software packages.
Please note: when initially ordering these
loggers, it is necessary to order at least one
ThermaData logger cradle.
°C/°F
%rh
MAX
MIN
order code
description 295-061
blind model HTB - internal sensors
296-061
LCD model HTD - internal sensors
295-062
blind model HTBF - external sensors
296-062
LCD model HTDF - external sensors
293-804
USB cradle, software & magnet
890-111
*UKAS 3-point Humidity Certificate
*price when purchased with a new instrument
specificationtemperature
humidity
range
-20 to 85 °C
0 to 100 %rh
resolution
0.1 °C
0.1 %rh
accuracy
±0.5 °C (0 to 45 °C) ±2 %rh @ 25 °C (10 to 90 %rh)
±1 °C (-20 to 70 °C)
±1.5 °C (70 to 85 °C)
hysteresis
n/a
±1 %rh
sensor type
silicon bandgap
capacitance polymer
memory
2 x 8000 readings
sample rate
0.1 to 255 minutes
battery
3.6 volt ½ AA lithium
battery life
minimum 2 years
display
10 mm LCD - toggles every 6 seconds/2 LED's
dimensions
Ø76 x 23 mm
weight
80 grams approx. - model dependant
optional UKAS Certificate of Calibration is available
35
HUMIDITY METERS
6000 Series Therma-Hygrometers
dew point calculation & max/min function
l remote or integral %rh & temperature probe
l displays max/min humidity or temperature
l optional backlit display
The 6000 series therma-hygrometers are easy to use relative humidity and air
temperature measuring instruments. The units measure %rh over the range of
0 to 100 %rh with a resolution of 0.1 %rh and temperature over the range of
-20 to 70 °C (-20 to 50 °C with a fixed probe) with a resolution of 0.1 °C/°F.
The therma-hygrometers incorporate a clear custom LCD with °C, %rh,
max/min, hold and dew point indication. There is an automatic display of
both open circuit and low battery. The 6000/6100 display the temperature
and humidity at the push of a button separately whereas the 6002/6102
display humidity and temperature simultaneously and additionally incorporate
a backlit display.
All units are powered by three 1.5 volt AAA batteries with a minimum life expectancy
of 10000 hours. An auto-power off facility turns the therma-hygrometer off
automatically after ten minutes, maximising battery life.
6100/6102 therma-hygrometers with remote probe
These therma-hygrometers utilise an interchangeable probe that incorporates
a one-metre lead with a 6-pin Lumberg connector. If the probe needs to
be replaced, the instrument will not require re-calibration as the probes are
fully interchangeable.
0601
UKAS Calibration Certificate
An optional 3-point UKAS Humidity Calibration
Certificate is available at a preferential price,
when purchased with these therma-hygrometers.
°C/°F
%rh
DEW
POINT
HOLD
MAX
MIN
specificationtemperature
order code
36
description
224-600
6000 therma-hygrometer
224-610
6100 therma-hygrometer
224-602
6002 therma-hygrometer
224-612
6102 therma-hygrometer
830-253
protective black silicone boot
224-615
6100/6102 spare probe
890-111
*UKAS 3-point Certificate
*price when purchased with a new instrument
AUTO
OFF
humidity
range
-20 to 50/70 °C 0 to 100 %rh
resolution
0.1 °C/°F 0.1 %rh
accuracy
±1 °C ±1 digit ±2 % (10 to 90 %rh)
sensor type
silicone bandgap capacitance polymer
battery
3 x 1.5 volt AAA
battery life minimum 5 years (10000 hours)
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
130/160 grams
optional UKAS Certificate of Calibration is available
NEW
measures humidity & air temperature
l dew point calculation & max/min function
l remote %rh & temperature probe
The new 6500 therma-hygrometer measures both
relative humidity and air temperature. The instrument
displays %rh over the range of 0 to 100 %rh with a
resolution of 0.1 %rh and temperature over the range
of -20 to 70 °C with a resolution of 0.1 °C
The unit incorporates a clear custom LCD with °C,
%rh, max/min, hold and dew point indication. An
auto-power off facility turns the therma-hygrometer off
automatically after ten minutes, maximising battery life.
The 6500 therma-hygrometer incorporates four, easy
to use, push buttons allowing the user to select on/off,
°C/°F, max/min and mode functions. Each unit is
supplied with a remote sensor and integral PVC lead.
order code description
224-655
6500 therma-hygrometer
830-253
protective black silicone boot
890-111
*UKAS 3-point Certificate
*price when purchased with a new instrument
°C/°F
%rh
DEW
POINT
HOLD
MAX
MIN
AUTO
OFF
specificationtemperature
humidity
range
-20 to 70 °C
0 to 100 %rh
resolution
0.1 °C/°F
0.1 %rh
accuracy
±1 °C ±1 digit ±3 % (10 to 90 %rh)
sensor type
silicone bandgap capacitance polymer
battery/battery life 3 x 1.5 volt AAA - 10000 hours
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
160 grams
HUMIDITY & MOISTURE METERS
6500 Therma-Hygrometer
7200 Moisture Meter
for monitoring moisture in plaster/concrete
l general purpose building moisture meter
l supplied with a probe, protective wallet & 50 spare pins
The 7200 is a compact, easy to use, general purpose, building moisture meter
designed to be used by building professionals and tradesmen to check the
moisture level of building materials (plaster and concrete) for moisture content
diagnosis.
The colour-coded analogue meter indicates high or low levels of WME %
moisture content of plaster or concrete over the range of 4 to 20 %. A reference
scale of 1 to 10 is also included for comparison readings without reference to
a particular percentage moisture content.
Scale 1 -calibrated from 8 to 20 % moisture content
Scale 2 -calibrated from 4 to 14 % moisture content
Scale 3 -reference scale calibrated from 1 to 10
For alternative probes available, see page 38.
order code
224-072
602-530
830-207
description
7200 building moisture meter
spare pins - pack of 50
protective PVC boot
specification
7200 moisture meter
rangescale 1 - plaster 8 to 20 %
scale 2 - concrete 4 to 14 %
scale 3 - linear 1 to 10
accuracy
±3 %
battery
9 volt PP3
battery life
120 hours
sensor type
resistance probe (12.7 mm spacing)
dimensions
36 x 80 x 147 mm
weight
190 grams
37
MOISTURE METERS
7000 Moisture Meter
for timber & general building materials
l five scales - concrete, plaster, two timber & reference
l colour-coded scales for ease of reading
The 7000 is ideal for assessing the moisture content in buildings. The unit can
be used for making rapid moisture assessments in a wide range of building
materials including wood, brickwork, plaster and concrete. The instrument is
housed in a flip-top polypropylene case and incorporates a clear analogue
display that has five colour-coded scales:- wood 1, wood 2, plaster,
concrete and a reference scale.
Each unit is supplied with a remote 2-pin moisture probe with a
one-metre PVC connecting lead and 50 spare pins. For alternative
probes available, see below.
specification
range scale 1 - wood 1
scale 2 - wood 2
scale 3 - plaster
scale 4 - concrete
scale 5 - linear
accuracy
battery & battery life
sensor type
dimensions
weight
7000 moisture meter
14 to 30 %
15 to 30 %
8 to 20 %
5 to 14 %
1 to 10
±3 %
9 volt PP3 alkaline - 120 hours
resistance probe (12.7 mm spacing)
58 x 127 x 195 mm
448 grams (including probe)
order code description
224-070
7000 moisture meter
602-530
spare pins - pack of 50
Moisture Probes
for use with 7000, 7150 & 7200 moisture meters
order code
general purpose probe
26 x 33 x 60 mm overall
This standard, general purpose, two-pin (12.7 mm spacing)
moisture meter probe is ideal for measuring moisture in a
variety of building materials. Supplied with a one metre
PVC lead and BNC connector.
180-160
Spare pins Ø1.2 x 7 mm (fitted) - pack of 50
602-530
180-170
heavy duty hammer probe This probe is designed for measuring moisture in
Ø40 x 290 mm overall
deep wall probe
Ø3.3 x 150 mm overall
38
wood and similar materials. The pin's insulated
shanks ensure the measurements are taken at the pin tip,
allowing varying depth measurements. Supplied with a one
metre PVC lead and BNC connector.
Spare standard pins Ø2.4 x 30 mm (fitted) - pack of 10
602-537
This insulated deep wall probe measures moisture
deep within walls, regardless of surface dampness. The
insulated shanks should be inserted into pre-drilled
holes. Each pair of probe assemblies is supplied
with a one metre PVC lead and BNC connector.
180-180
Spare standard probes Ø3.3 x 130 mm - pack of 2
602-539
PH INSTRUMENTATION
pH Pal Plus pH Tester
ideal for laboratories & water treatment facilities
l pocket-sized meter, ideal for everyday use
l automatic re-calibration feature
l easy to read 8 mm LCD display
l display hold function
The pH Pal Plus pH tester is a user-friendly, simple to use
pocket-sized pH meter that incorporates an automatic
re-calibration feature. At the touch of a button, the
instrument will automatically re-calibrate itself when
used in conjunction with a 7.00 pH buffer solution.
The unit is housed in a water resistant case and features
an easy to read 8 mm LCD display indicating pH over
the range of 0 to 14 pH with a resolution of 0.1 pH
and an accuracy of ±0.2 pH.
The pH Pal Plus tester will power off automatically after
ten minutes, maximising battery life. This pH Pal is ideal
for measuring the pH in water testing applications. The
pH tester is an invaluable tool when mixing concentrates
with water.
For pH buffer solutions and capsules, see page 42.
supplied with protective cap
acid 0 1
2
3
4
5
pH
order code description
813-513
pH Pal Plus pH tester
816-051
7.00 pH buffer solution
specification
range
resolution
accuracy
battery
battery life
display
dimensions
weight
6
neutral 7 8
HOLD
AUTO
0FF
9
alkaline
10 11 12 13 14
IP65
pH Pal Plus pH tester
0 to 14 pH
0.1 pH
±0.2 pH
4 x 1.5 volt LR44 button cell
150 hours
8 mm LCD
15 x 32 x 170 mm
70 grams
39
PH INSTRUMENTATION
8000 pH meter
interchangeable electrode
NEW
l simple & easy to use
l automatic re-calibration function
The 8000 pH meter features an easy to read, LCD
display and is supplied with a general purpose
combination glass electrode and carrying case.
The 8000 pH meter indicates pH over the range
of 0 to 14 pH with a resolution of 0.01 pH and
an accuracy of ±0.05 pH. The pH readings are
manually temperature compensated over the
range of 0 to 60 °C (default 25 °C).
The unit will power off automatically after ten
minutes, maximising battery life.
At the touch of a button, the instrument will
automatically re-calibrate itself when used in
conjunction with pH buffer solutions. For pH
buffer solutions, see page 42.
order code description
860-800
8000 pH meter
830-251
protective silicone boot
the 8000 pH meter is inclusive of pH electrode
AUTO
0FF
pH
specification
8100 pH Kit
8000 pH meter
0 to 14 pH
0.01 pH
±0.05 pH
3 x 1.5 volt AAA - 5000 hours
combination electrode
custom LCD
25 x 56 x 128 mm
130 grams
range
resolution
accuracy
battery & battery life sensor type
display
dimensions
weight
NEW
pH & temperature meter
l simultaneously displays pH & temperature
l automatic temperature compensation (ATC)
The 8100 pH meter features an easy to read, LCD
display and is supplied as a kit which includes a
8100 pH meter, general purpose combination
glass electrode, temperature probe, 4.01 and
7.00 pH buffer solutions and carrying case.
The 8100 pH meter indicates pH over the range
of 0 to 14 pH with a resolution of 0.01 pH and
temperature over the range of 0 to 99.9 °C with
a resolution of 0.1 °C. The pH readings are
automatically temperature compensated over
the operating range of 0 to 60 °C utilising the
temperature probe supplied.
At the touch of a button, the instrument will
automatically re-calibrate itself when used in
conjunction with pH buffer solutions. For pH buffer
solutions, see page 42.
order code description
860-810
8100 pH kit
40
°C
pH
temperature probe (170-101)
AUTO
0FF
specificationpH temperature
range
resolution
accuracy
battery & battery life sensor type
display
dimensions
weight
0 to 14 pH
0 to 99.9 °C
0.01 pH
0.1 °C
±0.05 pH
±0.5 °C
3 x 1.5 volt AAA - 5000 hours
combination electrode / thermistor
custom LCD
25 x 56 x 128 mm
130 grams
pH & temperature meter
PH INSTRUMENTATION
8100 Plus pH meter
NEW
l robust waterproof case offering IP66/67 protection
l manual/automatic temperature compensation
l integrated rubber seal for durability
lsimple pH re-calibration function
The new 8100 Plus pH meter is a three-in-one instrument
that features a large easy to read, LCD display that
indicates pH over the range of 0 to 14 pH with a resolution
of 0.01 pH, mV over the range of -999 to 999 mV
and temperature over the range of -39.9 to 149.9 °C with
a resolution of 0.1 °C. The LCD display features both
low battery indication and an optional backlight.
The pH readings are either manually or automatically
temperature compensated over the operating range of 0
to 60 °C. To automatically compensate, it is necessary
to utilise a thermistor temperature probe. Each unit
incorporates an auto-power off facility that automatically
turns the instrument off after ten minutes, maximising
battery life.
The 8100 Plus has an integrated rubber seal to ensure
complete water resistance and helps to reduce the possibility
of damage in harsh environments. At the touch of a button,
the instrument will automatically re-calibrate itself when
used in conjunction with pH buffer solutions. For pH buffer
solutions, see page 42.
Each unit incorporates an easy to use BNC connector
and waterproof Lumberg screw-locking type connector,
allowing a wide range of interchangeable thermistor probes
to be used. Contact our sales office for information on the
variety of probes available.
The 8100 Plus is available as a meter only or as a complete
kit which includes:
general purpose electrode
(823-501)
temperature probe
(170-100)
8100 Plus pH meter kit
l 8100
Plus pH meter (225-085)
l temperature probe (170-100)
l general purpose pH electrode (823-501)
l 4.01 pH buffer solution (816-050)
l 7.00 pH buffer solution (816-051)
l carrying case (830-080)
order code description
225-085
8100 Plus pH meter*
860-820
8100 Plus Kit
830-257
protective silicone boot
* 8100 Plus is exclusive of pH electrode & probe
°C
pH
mV
AUTO
0FF
IP66/67
specificationpH
range
resolution
accuracy
battery
battery life sensor type
display
dimensions
weight
mV
temperature
0 to 14 pH ±999 mV -39.9 to 149.9 °C
0.01 pH
1 mV
0.1 °C
±0.02 pH ±1 mV
±0.5 °C
3 x 1.5 volt AAA
minimum 5 years (2500 hours)
combination electrode / thermistor
15 mm LCD
32 x 71 x 141 mm
220 grams
41
PH INSTRUMENTATION
pH Electrodes
with BNC connector
pH meters are only part of the system, of equal importance is the design of the pH probes that are used to physically
measure the product. This range of standard hand held pH electrodes are fully interchangeable via a BNC connector
and are designed for use with the 8000/8100 pH meters or similar.
order code
general purpose electrode
This plastic bodied, electrode is ideal for measuring
the pH in liquids and semi-solids in a wide variety of
industries including water treatment, agriculture and
pharmaceutical.
823-501
12 mm spear-shaped electrode This glass penetration pH electrode is ideal for insertion
823-502
Ø12 x 120 mm
into semi-solid materials in a wide variety of industries
including water treatment and agriculture.
Ø12 x 120 mm
6 mm spear-shaped electrode This glass penetration pH electrode is suitable for
823-503
measuring the pH in a variety of applications. The probe
is ideal for inserting into semi-solid and soft materials.
Ø6 x 120 mm
knife probe electrode
Ø15 x 150 mm
This stainless steel, sheathed protected glass pH
electrode is ideal for insertion into semi-solid materials.
The knife probe can be used in a variety of industries
from food processing to agriculture.
823-510
Calibration Solutions & Capsules
for pH meters & electrodes
42
pH buffer solutions
pH buffer capsules
These ready-made pH buffer solutions are suitable for
checking pH instrumentation and pH electrodes.
These DIY pH buffer capsules are available in three
standard values, 4.00, 7.00 and 9.00 pH.
Buffer solutions are available for 4.01, 7.00 and
10.01 pH. All solutions are supplied in 100 ml bottles.
Each capsule makes 100 ml of solution when mixed
with distilled water. Supplied in packs of ten capsules.
order code
816-050
816-051
816-052
order code
816-004
816-007
816-009
description
4.01 pH buffer solution - 100 ml
7.00 pH buffer solution - 100 ml
10.01 pH buffer solution - 100 ml
description
4.00 pH buffer capsules (10)
7.00 pH buffer capsules (10)
9.00 pH buffer capsules (10)
in-house accredited laboratory
0601
l thermometer temperature range -50 to 200 °C
l rapid turnaround & flexible certification
l certified uncertainties from ±0.04 °C
l one to five-point UKAS Certificates
Our in-house UKAS accredited calibration laboratory for
temperature has a wide measurement range of -50 to
200 °C with a calibration and measurement capability of
0.02 °C. The laboratory can also measure resistance up
to 16 MΩ (i.e. resistance decade boxes and PT100/RTD
temperature simulators) and DC voltage 0 to 200 mV
(i.e. thermocouple simulators and calibrators). Original
UKAS Certificates provide proof that instruments and
probes have been calibrated against nationally approved
standards.
UKAS CALIBRATION & SERVICE
UKAS Temperature Calibration
thermometers & probes
Each UKAS Certificate indicates the deviations
from standards at various check points, the standard
being -18, 0, 40, 70 and 100 °C with a guaranteed
uncertainty, dependant on the probe type, see
calibration and measurement capability table below.
test caps & simulators
Each UKAS Certificate indicates the deviations from
standards at specific check points (-18, 0, 3, 70 and
100 °C) to an uncertainty of ±0.1 °C (resistance) or
±0.15 °C (thermocouple).
data-loggers
Each UKAS Certificate indicates the deviations from
standards at three check points (-18, 0 and 40 °C)
to an uncertainty of ±0.04 °C.
standard certificate uncertainty
thermistor thermometer & probe
-50 to 150 °C CMC 0.04 °C
PT100 (resistance sensors) thermometer & probe
-50 to 200 °C CMC 0.04 °C
thermocouple thermometer & probe
-50 to 120 °C CMC 0.15 °C
120 to 200 °C CMC 0.2 °C
temperature data-loggers
-50 to 100 °C CMC 0.04 °C
order code UKAS Certificate - temperature
890-200
890-210
890-215
890-230
890-235
890-240
instrument only standard 5-point
instrument & probe system 5-point
checker 3-point
test cap 1-point
simulator 5-point
data-logger 3-point
thermistor & PT100 test caps
-18 to 100 °C CMC 0.1 °C
thermocouple simulators
-200 to -50 °C CMC 0.25 °C
-50 to 1372 °C CMC 0.15 °C
43
distributed by:
issue 1 - 764-030/2013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement