Eden Arbors | VA68214 | Instructions / Assembly | Eden Arbors VA68214 Instructions / Assembly

A S S E M B LY I N S T R U C T I O N S
The Windsor Long Planter Box
www.edenarbors.com
18.38 in
15.5 in
34.75 in
11.5 in
41.75 in
15.5 in
Please read through before starting assembly.
Check Box for These Contents
In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346, ext #20 (Mon. to Fri. 8:00 AM to 4:00 PM EST).
1.
2.
3.
4.
Pre-Assembled Side Wall Panels (2)
Post Caps (4)
Floor Panel (1)
Pre-Assembled Front & Back Wall Panels with Posts Connected (2)
1
2
3
4
General Information
• Read Instructions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 4’x 8’ for unobstructed assembling.
• You should not need to use excessive force when assembling components.
Ver 1/Sep 2010
1
The Windsor Long Planter Box
STEP ONE
Connect the Front & Back Wall
to the Side Wall Panels
1
Lay out front wall panel on the work surface.
2
Insert the side walls into the routed holes on the front wall
panel posts. Push side walls until the locking tabs snap into place.
3
Fit the opposite back wall panel over the side walls.
STEP T WO
Insert Floor Panels & Post Caps
2
4
Pressure fit the floor panels into place.
5
Install the four post caps. Push caps until the locking tabs snap
into place
3
4
5
2
1915 Dove St., Port Huron MI USA 48060
Toll Free Phone: 1 800 282 9346 Toll Free Fax: 1 877 464 9286
www.edenarbors.com
Download PDF