Orbit | 57096 | Use and Care Manual | Orbit 57096 Use and Care Manual

Instructions
QUICK REFERENCE TIMER INSTRUCTIONS
1. Set Time and Date:
A. Turn rotary dial to time/date
B. To set time press “+” or “-” key to
advance clock to correct time of day.
Press enter. Blinking cursor moves
to year.
C. To set year press “+” or “-” key to
advance to current year. Press enter.
Blinking cursor moves to month.
D. To set month press “+” or “-” key
to advance to current month. Press
enter. (January is 1, February is 2, etc.).
Blinking cursor moves to day.
E. To set date press “+” or “-” key to
advance to current date. Press enter.
Current time appears on the display.
F. To review settings press next. To
change settings repeat steps A
through E.
proof no:
1
date: 09.04.09
des: SM spck: XX
job no: NA
2. Set Start Times for A or B Programs:
A. Turn rotary dial to A or B cycle start
times. The cursor will blink at start time
1 on the display.
B. Press “+” or “-” key to advance to
desired start time. Press enter. Cursor
advances to start time 2.
C. If more than one start time is required,
repeat step B for up to four start times
per day for A or B programs.
D. To review start times, press next.
To clear a start time press clear. To
change a start time repeat steps A
and B.
3. Set Zone Duration for A or B Programs:
A. Turn rotary dial to A or B zone/duration. The cursor blinks over station 1. To
select the watering duration for station
1 press “+” or “-” key to advance to the
desired duration from 1 to 99 minutes.
Press enter.
B. Repeat step A for any remaining stations (“A” or “B” appears over the station being programmed).
C. To review watering durations press
next. To clear a watering duration press
clear. To modify a watering duration
repeat step A.
4. Selecting Active Watering Days in the
A Program:
A. Turn the rotary dial to day of week. The
cursor blinks over “M” for Monday.
B. To activate a day for watering, Press
enter. The cursor advances to the next
day. A flag will appear over the days of
week indicating active watering days.
Watering will not occur on days without
the flag.
C. Repeat steps A and B. Any or all days of
the week may be selected.
dimensions:
Printers are responsible for
meeting print production
requirements. Any changes
must be approved by the
client and Fluid Studio.
printed piece must meet
designated specifications
on this form.
flat: w: 4.88" h: 2.55"
finished: w 4.88" d: " h 2.55"
colors
Registration
color
non printing
color
non printing
K
PMS
????
PMS
????
client: Orbit
sku: 57096
p 801 295 9820
f 801 951 5815
www.fluid-studio.net
1065 South 500 West
Bountiful, Utah 84010
upc: NA
file name: 57096-50E rB.indd
software: InDesign CS3
additional instructions:
· Font sizes cannot be smaller than 7 pt.
·
·
PMS
????
© 2007 Fluid Studio. This
work is the property of Fluid
Studio, and cannot be used,
reproduced or distributed
in any way without their
express permission.
D. For watering every 2nd day press next
to “2nd”. Press enter.
E. To skip a watering day press next. To
clear a watering day press clear. To
modify active watering days repeat
steps A and B.
Note: It is not possible to have days
entered weekly and every 2nd day.
5. Selecting a Watering Interval in the B
Program:
A. Turn the rotary dial to watering interval.
The cursor blinks at interval on the
display.
B. To enter an interval of days between
watering press “+” or “-” key (Example:
an interval of 5 will water every 5th day).
Press enter to activate interval.
C. To enter watering on odd or even days
press next until cursor is blinking to the
left of odd or even. Press enter.
D. To clear the interval and odd or even
days press clear. To modify repeat
steps A, B or C.
“- -”. Press “+” or “-” to advance to the
desired watering duration. Press enter
to activate watering.
6. Automatic Watering:
A. To water according to the automatic
plan entered, turn rotary dial to auto.
8. 24, 48, or 72 Hour Rain Delay:
A. Turn rotary dial to auto.
B. Press rain delay. Watering will be
discontinued for a 24 hour period from
the time you pressed rain delay without
modifying the program.
C. To increase the rain delay to 48 hours
press rain delay a second time. Press
again for 72 hours.
D. To discontinue rain delay and return to
automatic watering press clear.
7. Manual Watering:
A. Turn the rotary dial to auto.
B. Press manual to water all stations for
the watering durations active in the A
and B programs. Press enter to begin
watering.
C. To water only stations active in the A
or B program press next until “A” or
“B” appears under program in the left
corner of the display. Press enter to
begin watering.
D. To water a specific station press next
until the cursor is lined up over the
desired station. The display will read
9. Complete System Shut Down:
A. To completely stop all watering, turn
the rotary dial to the off position.
57096-50E Rev B
Download PDF