Sea Gull Lighting 5940BLE-15 Installation Guide
Advertisement
Advertisement
INSTALLATION AND SAFETY INSTRUCTIONS A-779
C. CIRCLINE BALLASTS
BALLAST REPLACEMENT
*NOTE: Please have a qualified electrician replace the ballast from your fixture.
Turn Power off.
Remove Diffuser.
Replace ballast with the same model.
• Separate the 120v connection between the ballast and the house supply wire.
• Disconnect the secondary ballast wires to the lamp by disconnecting the plug.
• Remove ballast mounting screws and remove ballast from fixture assembly.
• Replace ballast with the same make and model, secure ballast to fixture assembly, make proper wiring connections to the supply wire and install the socket plug to the lamps.
REPLACE BALLAST DEPENDING ON BALLAST TYPE BELOW.
A. TWIST LOCK BALLAST
• Pull lamp straight out.
• Twist ballast assembly and remove from base.
• Install new ballast by twistlocking into place.
D. SELF-BALLASTED LAMP
• Twist self ballast lamp assembly (from ballast) and remove from base.
Be sure not to remove by twisting from spiral glass lamp.
• Install new ballast by twist-locking into place.
B. SQUARE CASED BALLASTS
• Disconnect the secondary ballast wires to the socket by inserting a small screwdriver into the rear of the socket to release the wire lead, or disconnecting the wire nuts.
• Remove ballast mounting screws and remove ballast from fixture assembly.
• Replace ballast with the same model, secure ballast to fixture assembly, insert secondary ballast wires by pushing them into the rear of the socket, or with wire nuts, and make proper wiring connections to the supply wire.
Installation And
Safety Instruction
A-779
011107
All components needed for additional support will be provided.
Fill In Item Number On Carton And
File This Sheet For Fixture Reference. ITEM#_______________

Public link updated
The public link to your chat has been updated.
Advertisement