Cisco 3600X Video Data Sheet
Data Sheet
Cisco ME 3600X Series Ethernet Access Switches
Product Overview
®
The Cisco ME 3600X Series of Ethernet Access Switches is Cisco’s first series of switches built specifically for the
convergence of wireless and wire-line services. A natural evolution to Cisco’s Carrier Ethernet portfolio, the Cisco ME
3600X Series extends the portfolio’s transport speed to 10 Gbps in the access layer for business and mobile
applications. It also enables service providers to initiate Multiprotocol Label Switching (MPLS) -based VPN services
from within the access layer. Designed around key Carrier Ethernet features that simplify network operation, the Cisco
ME 3600X Series enables premium services with enhanced service-level agreement (SLA) capabilities. An optional
“pay-as-you-grow” feature and service activation model gives service providers a flexible, cost-effective solution.
The Cisco ME 3600X Series Ethernet Access Switches (Figure 1) are 1-rack-unit (1RU), fixed-form-factor
platforms available in copper and fiber hardware-optimized configurations:
●
Cisco ME 3600X-24TS (copper) with 24 10/100/1000 ports and two 10 Gigabit Ethernet SFP+ ports
●
Cisco ME 3600X-24FS (fiber) with 24 Gigabit Ethernet SFP ports and two 10 Gigabit Ethernet SFP+ ports
Figure 1.
Cisco ME 3600X Series Ethernet Access Switches
Benefits
Created for the delivery of today and tomorrow’s access services , the Cisco ME 3600X supports existing and
next-generation features and technology while remaining operationally simple to deploy and manage. It offers the
following key benefits.
Powered by the Cisco Carrier Ethernet ASIC
Powered by the Cisco Carrier Ethernet ASIC – designed specifically with service providers in mind, the Cisco ME
3600X series delivers essential Carrier Ethernet technologies including: H-QoS, MPLS and Virtual Private LAN
Services (VPLS). This custom and advanced ASIC design provides un-interrupted line rate performance while
delivering complex and taxing services such as ACL and H-QoS. The Carrier Ethernet ASIC integrates Cisco
traffic management innovation to deliver intelligent packet switching and routing operations.
© 2012–2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 10
MPLS in the Access Layer
The Cisco ME 3600X Series extends MPLS into the access layer by enabling service providers to initiate MPLSbased Layer 2 and Layer 3 VPN services from within the access layer. The Cisco ME 3600X Series gives service
providers the ability to expand MPLS toward their network edge to gain the advantages of a single unified MPLS
control plane across their network. The Cisco ME3600X offers full VPLS support allowing multipoint services
definition. For additional flexibility, VPLS can be deployed as a full mesh or with a hierarchy (H-VPLS).
“Pay-as-you-Grow” Investment Model
The use of licensing to activate features on the Cisco ME 3600X Series allows service providers to customize and
schedule their investment in access features for a time when network growth and customer demand justify the
investment. Unlike investments in the core and edge, where the physical location of network assets has minimal
impact on their accessibility and usage, the ROI on an access element is heavily influenced by its location in the
network and proximity to customers. The ability to deploy the Cisco ME 3600X Series and later activate features
as demand and growth dictate, with little if any need for service calls, delivers highly measureable investment
protection. This allows flexible timing for migrating from 1 Gbps to 10 Gbps, deploying MPLS services, and
boosting service capacity.
Advanced Service-Level Agreements (SLA)
Service-aware quality of service (QoS) allows service providers to expand and differentiate their services portfolio
with highly advanced and differentiating SLAs. The Hierarchical QoS capabilities of the Cisco ME 3600X Series
scale to eight queues per service, three levels of scheduling, and buffer volumes capable of accommodating
today’s most demanding wireline and wireless applications.
Mobile Timing and Synchronization Services
The Cisco ME 3600X Series provides the timing services required in today’s converged access network to support
mobile solutions including Radio Access Network (RAN) applications and offers integrated support for Building
Integrated Timing Supply (BITS) interface. The Cisco ME 3600X Series also supports synchronous Ethernet
(SyncE) with Ethernet Synchronization Messaging Channel (ESMC) and Synchronization Status Messages (SSM)
to allow best clock source traceability.
Operational Efficiency for Carrier Ethernet Access Deployments
The Cisco ME 3600X Series features key enhancements that help service providers simplify and facilitate the
management of their network, resulting in diminishing operational costs. This unique feature set enables the Cisco
ME 3600X Series to be deployed in a variety of applications including business service with 10 Gigabit Ethernet
User Network Interface (UNI) and Ethernet mobile backhaul. These features enhance performance awareness,
facilitate troubleshooting, and simplify service turn-up and restoration, ultimately reducing operational cost. “Dying
gasp” for power indicators and four external alarm inputs to detect changes in remote sites further help service
providers manage the health of network elements.
High-Performance Hardware
Based on the Cisco Carrier Ethernet ASIC, the Cisco ME 3600X Series is a non-blocking switching system
providing line-rate Carrier Ethernet performance. The custom Cisco Carrier Ethernet ASIC technology enables
next-generation Carrier Ethernet service integration without impacting line-rate performance. The 1RU switch
holds two slots for hot-swappable and redundant power supplies. Three fans are integrated into each power
supply, providing fan redundancy. High Availability is also achieved on the Cisco ME 3600X Series through
proactive diagnostic tools including Generic On-Line Diagnostics (GOLD) and Onboard Failure Logging (OBFL).
© 2012–2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 10
These tools help service providers avoid potential problems before they occur and troubleshoot and diagnose
once identified.
Table 1 lists the hardware part available for the Cisco ME 3600X Series.
Table 1.
Cisco ME 3600X Series Ethernet Access Switch Hardware Options
Part Number
Product Name
ME-3600X-24TS-M
Cisco ME 3600X-24TS Ethernet Access Switch
ME-3600X-24FS-M
Cisco ME 3600X-24FS Ethernet Access Switch
PWR-ME3KX-AC
Cisco ME 3600X/ME 3800X Series field- replaceable AC power supply and fan module
PWR-ME3KX-DC
Cisco ME 3600X/ME 3800X Series field- replaceable DC power supply and fan module
PWR-ME3KX-AC=
Cisco ME 3600X/ME 3800X Series spare field-replaceable AC power supply and fan module
PWR-ME3KX-DC=
Cisco ME 3600X/ME 3800X Series spare field-replaceable DC power supply and fan module
ME-FANTRAY=
Cisco ME 3600X/ME 3800X Series spare fan tray
RCKMNT-ME3KX-ETSI
ETSI Rack mount Option for the Cisco ME 3600X/ME 3800X Series
RCKMNT-ME3KX-23IN
23” Rack mount Option for Cisco ME 3600X//ME 3800X Series
RCKMNT-ME3KX-ANG
Angled Rack mount for Cisco ME 3600X/ME 3800X Series
RCKMNT-ME3KX-ETSI=
Spare ETSI Rack mount Option for the Cisco ME 3600X/ME 3800X Series
RCKMNT-ME3KX-23IN=
Spare 23” Rack mount Option for Cisco ME 3600X//ME 3800X Series
RCKMNT-ME3KX-ANG=
Spare Angled Rack mount for Cisco ME 3600X/ME 3800X Series
RCKMNT-ME3KX-19IN=
Spare 19” Rack mount Option for Cisco ME 3600X//ME 3800X Series
ME-3600X-24TS-M=
Spare Cisco ME 3600X-24TS Ethernet Access Switch
ME-3600X-24FS-M=
Spare Cisco ME 3600X-24FS Ethernet Access Switch
MEM-ME3K-2GB
Cisco ME 3600X and ME3800X SD Memory Card 2GB
MEM-ME3K-2GB=
Cisco ME 3600X and ME3800X SD Memory Card 2GB Spare
MEM-ME3K-4GB
Cisco ME 3600X and ME3800X SD Memory Card 4GB
MEM-ME3K-4GB=
Cisco ME 3600X and ME3800X SD Memory Card 4GB Spare
The Cisco ME 3600X Series supports a wide range of SFP and SPF+ optic modules. Table 2 lists their part numbers.
Table 2.
SFP and SFP+ Modules Supported with Cisco ME 3600X Series
Part number
SFP
GLC-FE-100FX, GLC-FE-100EX, GLC-FE-100ZX, GLC-FE-100LX, GLC-FE-100BX-U, GLC-FE-100BX-D,
GLC-LH-SM, GLC-SX-MM, GLC-SX-MMD, GLC-LH-SMD, GLC-ZX-SM, GLC-EX-SMD, GLC-T, GLC-BX-U (CPN
10-2094-02), GLC-BX-D (CPN 10-2093-02), SFP-GE-L, SFP-GE-S, SFP-GE-T, CAB-SFP-50CM, CWDM-SFP1470, CWDM-SFP-1490, CWDM-SFP-1510, CWDM-SFP-1530, CWDM-SFP-1550, CWDM-SFP-1570, CWDMSFP-1590, CWDM-SFP-1610, DWDM-SFP-6061, DWDM-SFP-5979, DWDM-SFP-5898, DWDM-SFP-5817,
DWDM-SFP-5736, DWDM-SFP-5655, DWDM-SFP-5575, DWDM-SFP-5413, DWDM-SFP-5494, DWDM-SFP5332, DWDM-SFP-5252, DWDM-SFP-5172, DWDM-SFP-5092, DWDM-SFP-5012, DWDM-SFP-4931, DWDMSFP-4851, DWDM-SFP-4772, DWDM-SFP-4692, DWDM-SFP-4612, DWDM-SFP-4532, DWDM-SFP-4453,
DWDM-SFP-4373, DWDM-SFP-4294, DWDM-SFP-4214, DWDM-SFP-4134, DWDM-SFP-4056, DWDM-SFP3977, DWDM-SFP-3898, DWDM-SFP-3819, DWDM-SFP-3739, DWDM-SFP-3661, DWDM-SFP-3582, DWDMSFP-3504, DWDM-SFP-3425, DWDM-SFP-3346, DWDM-SFP-3268, DWDM-SFP-3190, DWDM-SFP-3112,
DWDM-SFP-3033, DWDM-SFP-6141
SFP+
SFP-10G-SR, SFP-10G-LR, SFP-10G-ER, SFP-10G-ZR, SFP-10G-LRM, SFP-H10GB-CUxM, DWDM-SFP10G61.41, DWDM-SFP10G-60.61, DWDM-SFP10G-59.79, DWDM-SFP10G-58.98, DWDM-SFP10G-58.17, DWDMSFP10G-57.36, DWDM-SFP10G-56.55, DWDM-SFP10G-55.75, DWDM-SFP10G-54.94, DWDM-SFP10G-54.13,
DWDM-SFP10G-53.33, DWDM-SFP10G-52.52, DWDM-SFP10G-51.72, DWDM-SFP10G-50.92, DWDM-SFP10G50.12, DWDM-SFP10G-49.32, DWDM-SFP10G-48.51, DWDM-SFP10G-47.72, DWDM-SFP10G-46.92, DWDMSFP10G-46.12, DWDM-SFP10G-45.32, DWDM-SFP10G-44.53, DWDM-SFP10G-43.73, DWDM-SFP10G-42.94,
DWDM-SFP10G-42.14, DWDM-SFP10G-41.35, DWDM-SFP10G-40.56, DWDM-SFP10G-39.77, DWDM-SFP10G38.98, DWDM-SFP10G-38.19, DWDM-SFP10G-37.40, DWDM-SFP10G-36.61, DWDM-SFP10G-35.82, DWDMSFP10G-35.04, DWDM-SFP10G-34.25, DWDM-SFP10G-33.47, DWDM-SFP10G-32.68, DWDM-SFP10G-31.90,
DWDM-SFP10G-31.12, DWDM-SFP10G-30.33
© 2012–2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 10
Flexible Software Options
®
The Cisco ME 3600X Series supports the Cisco IOS Software Activation feature. With this feature Cisco IOS
Software feature sets can be activated by Cisco software licenses, enabling a “pay-as-services-grow” model. This
flexibility allows service providers to invest in software resources only when their business needs it. The Cisco ME
3600X Series offers three different Cisco IOS Software licenses:
●
The 10GE Upgrade license allows service providers to enable 10 Gigabit Ethernet on the uplink only when
required, supporting a pay-as-you-grow strategy.
●
The Metro IP Access license offers advanced QoS, Carrier Ethernet Layer 2 features, Ethernet OAM,
Layer 3 features for advanced IP routing protocols, multi-VPN routing, and Forwarding Customer Edge
(multi-VRF CE) capabilities.
●
The Advanced Metro IP Access license adds the following capabilities to the METRO IP ACCESS image:
MPLS, EoMPLS pseudowires, Virtual Private Lan Services (VPLS), MPLS traffic engineering, Fast Reroute
(FRR) and MPLS VPN support.
Table 3 lists the key feature in the Cisco IOS Software licenses for the Cisco ME 3600X Series and Table 4 lists
the software options.
Table 3.
Feature Set in Cisco ME 3600X Series Licenses
Metro IP Access
Advanced Metro IP Access
Layer 2 (EVC, 802.1Q)
All features in METROIPACCESS plus:
IP Routing (RIP, OSPF, EIGRP, IS-IS, BGP) and BFD
MPLS
PIM (SM, DM, SSM), SSM mapping
MPLS traffic engineering (TE) and Fast Reroute (FRR)
Ethernet OAM (802.1ag, 802.3ah, E-LMI, 1731 PM)
MPLS OAM
MST, REP, Flexlink, G.8032
MPLS VPN
Multicast VPN (MVPN)
Synchronous Ethernet, Ethernet Synchronization messaging Channel
(ESMC), Synchronization Status Messages
Ethernet Over MPLS (EoMPLS)
Switch Database Management (SDM) templates
Virtual Private LAN services (VPLS), Hierarchical VPLS (H-VPLS)
Multi-VRF CE (VRF-lite) with service awareness (ARP, ping, SNMP, syslog,
traceroute, FTP, TFTP)
Pseudowire redundancy
Table 4.
Cisco ME 3600X Series Ethernet Access Switch Software Options
Part Number
Product Name
License Options
ME3600X-I
Cisco ME 3600X Series METRO IP ACCESS Software Paper License
ME3600X-A
Cisco ME 3600X Series ADVANCED METRO IP ACCESS Software Paper License
ME3600X-10G
Cisco ME 3600X Series 10GE UPGRADE Software Paper License
Product Activation Keys
ME3600X-LIC=
Product activation key for ME3600X Series (Paper Delivery)
L-ME3600X-LIC=
Product activation key for ME3600X Series (E-Delivery)
License Upgrade Options
L-ME3600X-A
Cisco ME 3600X Series ADVANCED METRO IP ACCESS Software E License
L-ME3600X-10G
Cisco ME 3600X Series 10GE UPGRADE Software E License
Software Options
S360XVT-12252EY
Cisco ME 360X SERIES IOS UNI. W/O CRYPTO – Release 12.2(52)EY
© 2012–2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 10
Part Number
Product Name
S360XVK9T-12252EY
Cisco ME 360X SERIES IOS UNIVERSAL – Release 12.2(52)EY
S360XVT-15102EY
Cisco ME 360X SERIES IOS UNIVERSAL W/O CRYPTO TAR – Release 15.1(2)EY
S360XVK9T-15102EY
Cisco ME 360X SERIES IOS UNIVERSAL TAR – Release 15.1(2)EY
S360XVT-15202S
Cisco ME 360X SERIES IOS UNIVERSAL W/O CRYPTO TAR – Release 15.2(2)S
S360XVK9T-15202S
Cisco ME 360X SERIES IOS UNIVERSAL TAR – Release 15.2(2)S
S360XVT-15204S
Cisco ME 360X SERIES IOS UNIVERSAL W/O CRYPTO TAR – Release 15.2(4)S
S360XVK9T-15204S
Cisco ME 360X SERIES IOS UNIVERSAL TAR – Release 15.2(4)S
S360XVT-15301S
Cisco ME 360X SERIES IOS UNIVERSAL W/O CRYPTO TAR – Release 15.3(1)S
S360XVK9T-15301S
Cisco ME 360X SERIES IOS UNIVERSAL TAR – Release 15.3(1)S
S360XVT-15302S
Cisco ME 360X SERIES IOS UNIVERSAL W/O CRYPTO TAR – Release 15.3(2)S
S360XVK9T-15302S
Cisco ME 360X SERIES IOS UNIVERSAL TAR – Release 15.3(2)S
Key Features
Table 5 lists the features of the Cisco ME 3600X Series.
Table 5.
Cisco ME 3600X Series Features
Features
Ethernet Services
● Ethernet Virtual Connections (EVCs) for:
◦
QinQ
◦
Selective QinQ
◦
Inner and outer VLAN classification
◦
EVC Push and Pop rewrite
◦
EVC local Connect
● Layer 2 Protocol Tunneling (L2PT)
● Hierarchical VPLS (H-VPLS), Virtual Private LAN Services (VPLS), VPLS Border Gateway Protocol [BGP] Signaling,
● Virtual Private Wire Service (VPWS), Ethernet over MPLS (EoMPLS), pseudowire redundancy
● Ethernet Data Plane loopback (Terminal and Facility)
Layer 3 Services
● Layer 3 Routing
● IPv4 Routing (Border Gateway Protocol [BGP], Intermediate System-to-Intermediate System [IS-IS], and Open Shortest Path First [OSPF]), Hot
Standby Router Protocol (HSRP), Virtual Router Redundancy Protocol (VRRP)
● IPv6 Unicast Routing (Border Gateway Protocol [BGP], Intermediate System-to-Intermediate System [IS-IS], and Open Shortest Path First [OSPF])
● IPv6 Provider Edge (6PE)
● IPv6 VPN over MPLS (6VPE)
● MPLS
● Label Distribution Protocol (LDP), Targeted LDP (T-LDP), Resource Reservation Protocol (RSVP), Differentiated Services (DiffServ)-aware
traffic engineering, MPLS L3VPN
● MPLS Traffic Engineering (including TE-FRR)
● Carrier Supporting Carrier (CsC) with BGP as CE-PE routing protocol
● BGP with label distribution (RFC3107)
● Routed Pseudowire
● Integrated Routing and Bridging (IRB)
● Policy Based Routing (PBR)
© 2012–2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 10
Features
QoS
● Up to 4000 egress queues per system
● Class-Based Weighted Fair Queuing (CBWFQ)
● Priority Queuing
● 2-rate 3-color (2R3C) ingress Policing, Egress Policing (1R2C) for LLQ
● Ingress and Egress marking (CoS, DSCP, MPLS Experimental Bits)
● Egress shaping per port and per queue
● Modular QoS CLI (MQC)
● 3-level H-QoS
● Classification based on inner and outer class of service (CoS) or VLAN ID
● Copy inner to outer CoS
● WRED
● IPV6 QoS
● Table Map
Multicast
● IPv4 Multicast
● Protocol Independent Multicast sparse mode (PIM-SM), PIM Source-Specific Multicast (PIM SSM), PIM SSM mapping
● Internet Group Management Protocol Versions 1, 2, and 3 (IGMPv1, v2, and v3)
● IGMPv1, v2, and v3 snooping on Switchport, EVC interfaces and Pseudowires.
● PIM Snooping
● IPv4 multicast per VRF Lite
● Multicast VPN (MVPN)
Security
● Authentication, authorization and accounting (AAA); TACACS+; Secure Shell (SSH) Protocol; MAC limiting per Ethernet flow point (EFP) or
bridge domain; unicast, multicast, and broadcast storm control blocking on any interface or port;
● Layer 2 ACLs
● Layer 3 ACLs for IPv4 and IPv6
● ACL on switchport, EVC and routed interfaces
● Mac limit per Bridge Domain or VPLS instance
● Control Plane Policing
● DHCP Snooping with option 82
● Dynamic Arp Inspection (DAI)
● SPAN
● 802.1x Authenticator
Availability
● Resilient Ethernet Protocol (REP)
● ITU-T G.8032 Ethernet Ring Protection Switching
● IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
● IEEE 802.1s Multiple Spanning Tree Protocol (MST)
● Per-VLAN Rapid Spanning Tree (PVRST+)
● MPLS TE Fast Reroute (FRR)
● Flexlink
● BFD for Static, ISIS, OSPF, BGP
● BFD over Switched Virtual Interface (SVI)
● BFD triggered FRR
● 802.3ad Link Aggregation Bundles
● MPLS IGP-LDP Synchronization
● LACP 1-1 redundancy with Fast Switchover
● EoMPLS Link Path Through
© 2012–2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 10
Features
Operations, Administration, and Maintenance (OAM)
● CFM (802.1ag)
● Link OAM (802.3ah)
● MPLS OAM
● E-LMI (CE and PE)
● 1731 Performance Monitoring (ETH-DM and ETH-SLM) with concurrent and on demand operations
● Policy Based Routing (PBR)
Manageability
● Simple Network Management Protocol (SNMP)
● MIBs
● RMON
● Cisco Active Network Abstraction (ANA) Version 3.7.1: Physical and logical inventory, service-level views with support for the following
technologies: OSPF, BGP, EtherChannel, routing, LAG, ACL, Cisco Discovery Protocol, ARP
● CiscoWorks Lan Management Solution (LMS) 3.2
● Embedded Event Manager (EEM 4.0)
● Switch Database Management (SDM)
● 60 days build-in evaluation licenses
● External SD Flash Cards support
Timing
● ITU-T Synchronous Ethernet (syncE) with Ethernet Synchronization Messaging Channel (ESMC)
● Synchronization Status Messages (SSM)
Product Specifications
Tables 6 through 8 list product, power, and environmental specifications for the Cisco ME 3600X Series. Table 9
lists standards and protocols, and Table 10 gives safety and compliance information.
Table 6.
Product Specifications
Description
Cisco ME 3600X-24TS
Cisco ME 3600X-24FS
Performance
Forwarding bandwidth full duplex: Cisco ME 3600X-24TS
AC or DC: 44 Gbps
Forwarding bandwidth full duplex: Cisco ME 3600X-24FS
AC or DC: 44 Gbps
Forwarding rate: Cisco ME 3600X-24TS AC or DC: 65 Mpps
Forwarding rate: Cisco ME 3600X-24FS AC or DC: 65 Mpps
Configurable maximum transmission unit (MTU) of up to
9,800 bytes, for bridging on Gigabit and 10 Gigabit
Configurable maximum transmission unit (MTU) of up to
9,800 bytes, for bridging on Gigabit and 10 Gigabit
DRAM: 1GB
Flash: 64MB
Packet buffer: 44MB
DRAM: 1GB
Flash: 64MB
Packet buffer: 44MB
External SD Flash: 2GB and 4GB SD Flash cards (optional)
Memory
External SD Flash: 2GB and 4GB SD Flash cards (optional)
Connectors and
cabling
10/100/1000 ports:
10/100/1000 BASE-T ports: RJ-45 connectors, 4-pair
Category 5 unshielded twisted pair (UTP) cabling
© 2012–2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
SFP ports:
● 10/100/1000BASE-T SFP-based ports: RJ-45
connectors, 4-pair Category 5 UTP cabling
● 100BASE-FX and -LX: Duplex LC receptacle fiber
connectors (multimode and single-mode)
● 100BASE-BX: Single-fiber LC receptacle connector
(single-mode fiber)
● 100BASE-EX: SFP module for 100 Mb port, 1310 nm
wavelength, 40 km over single-mode fiber
● 100BASE-ZX: SFP module for 100 Mb port, 1550 nm
wavelength, 80 km over single-mode fiber
● 1000BASE-BX: Single-fiber LC receptacle connector
(single-mode fiber)
● 1000BASE-SX, -LX/LH, -EX and -ZX and CWDM and
DWDM: Duplex LC receptacle fiber connectors
(multimode and single-mode fiber)
Page 7 of 10
Description
Cisco ME 3600X-24TS
Cisco ME 3600X-24FS
SFP+ ports:
● SFP-10G-SR
● SFP-10G-LR
● SFP-10G-ER
● SFP-10G-ZR
● SFP-10G-LRM
● DWDM SFP-10GE
● SFP-H10GB-CUxM where x = 1, 3, 5 meters
SFP+ port supports 1000BASE-X except 1000BASE-T
Management console port: RJ-45-to-DB9 cable for PC connections
Management 10/100/1000 Ethernet: RJ-45 connector
BITS and alarm ports: RJ-45 connector
Indicators
Per-port status LEDs: Link integrity, port disabled, and activity indications
Power input /output status LED
Alarm status LED
SynchE status LED
System-status LED
Dimensions
All SKUs 1.72-in. x 17.50-in. x 20.33-in. (H x W x D)
Weight
ME-3600X-24TS-M 14.15 lb (6.41 kg)
ME-3600X-24FS-M 14.50 lb (6.57 kg)
PWR-ME3KX-AC 2.90 lb (1.31 kg)
PWR-ME3KX-AC 2.90 lb (1.31 kg)
PWR-ME3KX-DC 3.10 lb (1.40 kg)
PWR-ME3KX-DC 3.10 lb (1.40 kg)
ME-FANTRAY 1.65 lb (0.74 kg)
ME-FANTRAY 1.65 lb (0.74 kg)
ME3600X-24TS-M: 205,863 hours
ME3600X-24FS-M: 188,372 hours
PWR-ME3KX-DC: 319,000 hours (48V input at 40ºC)
PWR-ME3KX-DC: 319,000 hours (48V at 40ºC)
PWR-ME3KX-AC: 328,000 hours (120V at 40ºC)
342,000 hours (230V at 40ºC)
PWR-ME3KX-AC: 328,000 hours (120V at 40ºC),
342,000 hours (230V at 40ºC)
ME-FANTRAY: 2,177,000 hours (12V input at 40ºC)
ME-FANTRAY: 2,177,000 hours (12V input at 40ºC)
Mean time between
failure (MTBF)
Table 7.
Power Specifications
Description
Cisco ME 3600X-24TS
Cisco ME 3600X-24FS
Power consumption
Cisco ME 3600X-24TS, one AC and one fan tray: 150W
(typical), 192W (maximum), 512 Btus per hour (typical), 656
Btus per hour (maximum)
Cisco ME 3600X-24FS, one AC and one fan tray: 155W
(typical), 223W (maximum), 530 Btus per hour (typical), 762
Btus per hour (maximum)
Cisco ME 3600X-24TS, two AC: 158W (typical), 198W
(maximum), 540 Btus per hour (typical), 677 Btus per hour
(maximum)
Cisco ME 3600X-24FS, two AC: 163W (typical), 228W
(maximum), 557 Btus per hour (typical), 778 Btus per hour
(maximum)
Cisco ME 3600X-24TS, one DC and one FT: 151W (typical), Cisco ME 3600X-24FS, one DC and one FT: 156W (typical),
208W (maximum), 516 Btus per hour (typical), 711 Btus per 241W (maximum), 533 Btus per hour (typical), 823 Btus per
hour (maximum)
hour (maximum)
Cisco ME 3600X-24TS, two DC: 157W (typical), 204W
(maximum), 537 Btus per hour (typical), 697 Btus per hour
(maximum)
Cisco ME 3600X-24FS, two DC: 161W (typical), 233W
(maximum), 550 Btus per hour (typical), 796 Btus per hour
(maximum)
AC input voltage and 100 to 240VAC, 50 to 60Hz
frequency
DC input voltages
18V to 32VDC, 36V to 72VDC
© 2012–2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 8 of 10
Table 8.
Environmental Specifications
Cisco ME 3600X Series Environment Specification (NEBS)
Operating
environment and
1
altitude
Normal operating temperature and altitudes:
0 to +50ºC, up to 1000 feet (300m)
0 to +45ºC, up to 6000 feet (1800m)
0 to +40ºC, up to 10,000 feet (3000m)
2
Short-term exceptional conditions:
0 to +60ºC, up to 1000 feet (300m)
0 to +55ºC, up to 6000 feet (1800m)
0 to +50ºC, up to 10,000 feet (3000m)
0 to +45ºC, at sea level with single fan failure
3
Relative humidity
4
5% to 95%, non-condensing
Acoustic noise
LpA: 43 dB typical, 46 dB maximum
LwA: 5.4 Bel typical, 5.6 Bel maximum
Storage
environment:
Temperature: –25 to +70ºC altitude: 15,000 ft
1. Switch supports -5oC operation provided that it powers up at ambient equal to or greater than 0oC. SFP-10G-LRM SFP+ module may only be
used from 0oC. GLC-T SFP may only be used from 0 to +50ºC, up to 1000 feet (300m) environment, for normal operating and short-term conditions
2. Not more than the following in a one-year period: 96 consecutive hours, or 360 hours total, or 15 occurrences
3. This may be limited by specification of optical modules
4. Acoustic noise is measured per ISO 7779 and declared per ISO 9296
Table 9.
Standards and Protocols
Standards and Protocols
● IEEE 802.1s
● IEEE 802.1w
● IEEE 802.1Q VLAN
● IEEE 802.3 10BASE-T
● IEEE 802.3ad
● IEEE 802.3ah
● IEEE 802.3u 100BASE-T
● IEEE 802.3ab 1000BASE-T
● IEEE 802.1ag
● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and
1000BASE-T ports
● IEEE 802.1D Spanning Tree Protocol
● IEEE 802.3z 1000BASE-X
● BFD for OSPF, IS-IS, BGP, HSRP, EIGRP
● IEEE 802.1p CoS classification
● IP routing: Static, RIP versions 1 and 2, EIGRP, OSPF, BGPv4, PIMSM, and PIM-DM (metro IP access only)
● Management: SNMP versions 1, 2, and 3
● MEF 9 & 14 certified
● MEF CE 2.0 certified (E-LINE, E-LAN, E-TREE)
Table 10.
Safety and Compliance
Type
Standards
Electromagnetic
FCC Part 15 Class
Emissions
Compliance
● EN 55022 Class A (CISPR22 Class A)
● EN 55024
● EN 300 386
● VCCI Class A
● AS/NZS 3548 Class A or AS/NZS CISPR22 Class A
● KCC
● CE Marking
Safety
● UL 60950-1
● UL to CAN/CSA 22.2 No.60950-1
● TUV/GS to EN 60950-1 with all Amendments
● CB to IEC 60950-1 with all country deviations
● NOM to NOM-019-SCFI (through distributors)
● CE Marking
● CCC
© 2012–2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 9 of 10
Type
Standards
NEBS
GR-63-CORE, GR-1089-CORE – Level 3, Type 2
Verizon’s FOC Certification on optical SFPs
ETSI
EN 300 019 – Storage: Class 1.2, Transportation: Class 2.3, In-Use: Class 3.2
Service and Support
Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs
are delivered through a unique combination of people, processes, tools and partners, resulting in high levels of
customer satisfaction. Cisco services help you protect your network investment, optimize network operations, and
prepare your network for new applications to extend network intelligence and the power of your business. For more
information about Cisco services, refer to Cisco Technical Support Services or Cisco Advanced Services.
Cisco is committed to minimizing your total cost of ownership. Cisco offers a portfolio of technical support services to
help ensure that Cisco products operate efficiently, remain highly available, and benefit from the most up-to-date
system software. The services and support programs described in Table 11 are available as part of the Cisco Carrier
Ethernet Switching Service and Support solution, and are available directly from Cisco and through resellers.
Table 11.
Service and Support
Service and Support
Features
Benefits
Advanced Services
Cisco Total Implementation Solutions (TIS),
available directly from Cisco
● Project management
● Site survey, configuration, and deployment
● Supplement existing staff
● Help ensure functions meet needs
Cisco Packaged TIS, available through
resellers
● Installation, text, and cutover
● Training
● Mitigate risk
● Major moves, adds, and changes
● Design review and product staging
Cisco SP Base Support and Service ProviderBased Onsite Support, available directly from
Cisco
Cisco Packaged Service Provider- Based
Support, available through resellers
● 24-hour access to software updates
● Web access to technical repositories
● Telephone support through the Cisco
Technical Assistance Center (TAC)
● Advance replacement of hardware parts
Printed in USA
© 2012–2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
● Facilitate proactive or expedited problem
resolution
● Lower total cost of ownership by taking
advantage of Cisco expertise and
knowledge
● Minimize network downtime
C78-601946-10
03/13
Page 10 of 10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement