Item #1000-001-036

Model #847658005014

USE AND CARE GUIDE

3-LIGHT LED RAIL LIGHT CORD AND PLUG

Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service

8 a.m. - 6 p.m., EST, Monday - Friday

1-877-527-0313

HAMPTONBAY.COM

1500T3

THANK YOU

We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this 3-light LED rail light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!

Table of Contents

Table of Contents ..................................2

 

Safety Information .................................2

 

Warranty .................................................2

 

Pre-Installation ......................................3

 

Planning Installation ................................... 3  

Tools Required ........................................... 3  

Hardware Required .................................... 3  

Package Contents ...................................... 3  

Installation ............................................. 4

 

Power Plug Assembly ........................... 5

 

Safety Information

Read these installation instructions and review the diagrams thoroughly before installing the track system. Save these instructions.

□ This track light is rated at 120 volts, 60Hz,

170mA, 15.5W.

□ This product is damp-listed.

WARNING: Deviation from the assembly instructions may result in a risk of fire or electric shock.

WARNING: This equipment has been tested and found to comply with the limits for a Class B digital

Device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:



Reorient of relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into a different outlet and circuit from the receiver outlet and circuit.



Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Warranty

LIMITED WARRANTY

The manufacturer warrants this product to be free from defects in materials and workmanship for a period of three

(3) years from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer's only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer's discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect, or mishandling.

This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material workmanship. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including labor/expense costs involved in the replacement or repair of said product.

Contact the Customer Service Team at 855-HD-HAMPTON (1-855-434-2678) or visit www.Hamptonbay.com.

2

Pre-Installation

PLANNING INSTALLATION

Before you begin installation, check to ensure all parts listed in the Package Contents section are contained within the packaging and that there is no damage to any of the parts.

TOOLS REQUIRED

Drill

Phillips screwdriver

HARDWARE REQUIRED

NOTE: Hardware not shown to actual size.

AA BB CC

Part

AA

Description

Back panel screw (preassembled to Rail light (A)

BB Anchor

PACKAGE CONTENTS

A

Quantity

2

4

4

Part Description Quantity

1

Please contact 1-877-527-0313 for further assistance.

Installation

1

Preparing the light for installation

□ Remove the back panel screws (AA) from the back of the rail light (A).

□ Remove the back panel (1) from the light (A).

2

Installing the back panel

□ Determine the installation location and using the back panel (1) as a template, mark the installation holes with a pencil.

□ Drill two holes at the installation locations and insert the anchors (BB) into the wall holes.

□ Attach the back panel (1) to the wall using the wall screws (CC).

AA

BB

A

1

3

Installing the rail light

□ Install the rail light (A) to the back panel (1) using the previously-removed back panel screws (AA).

CC 1

4

Finalizing the installation

□ Adjust the lights and plug the rail light into an outlet.

□ To turn the lights on and adjust the brightness, turn the dimmable On/Off switch (1) clockwise.

A

AA

1

4

Power Plug Assembly

1

Preparing the wire

2

Attaching the wire to the plug

WARNING: Disconnect the power before wiring.

WARNING: This is a polarized plug. One blade is wider and marked WHITE. This blade must be connected to the ribbed side of the wire.

□ Cut the end of the wire. One line is shorter by 0.2 in.

(5.0 mm) than the other. Ensure there are no strands sticking out of the insulation.

□ Slide the cap off. With the plug in position as shown, place the wire with the ribbed side at the bottom.

CAUTION: Do not use type TPT extra flexible cords (as used on electric shavers) or type XT (as used on Christmas tree lights), or any small diameter cords. To avoid overheating, do not use on broilers, toasters, irons or devices rated over 1000 watts (8 amps and 125 volts).

□ Bend the end of the wire and push into the bottom of the groove.

□ Push the wire down with your thumb and slide the cap completely into place.

.2 in.

Ribbed Side

Wider Blade

Please contact 1-877-527-0313 for further assistance.

Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service

8 a.m.- 6 p.m., EST, Monday-Friday

1-877-527-0313

HAMPTONBAY.COM

Retain this manual for future use.

□

□









□

□

□ □

□

□

□

□

□

□

□

□