USE AND CARE GUIDE

5-LIGHT CHANDELIER

Item #000-000

Model #89547

Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service

8 a.m. - 6 p.m., EST, Monday - Friday

1-877-527-0313

HAMPTONBAY.COM

THANK YOU

We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this fixture. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!

Table of Contents

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Service Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Safety Information

1.

2.

3.

4.

5.

6.

Read and understand all instructions and illustrations completely before proceeding with assembly and installation of this fixture.

Never attempt any work without shutting off the electricity.

Go to the main fuse box, or circuit breaker, in your home. Place the main power switch in the “OFF” position and unscrew the fuse(s), or switch off the circuit breaker switch(es), that control the power to the fixture or room that you are working on.

Place the wall switch in the "OFF" position. If the fixture to be replaced has a switch or pull chain, place it in the "OFF" position.

If you have any doubts about how to install this lighting fixture, or if the fixture fails to operate completely, please contact a licensed electrical contractor.

All parts must be used as indicated in these instructions. Do not substitute any parts, leave parts out, or use any parts that are worn-out or broken. Failure to obey this instruction could invalidate the ETL listing and/or C.S.A. certification of this fixture.

DANGER: Hazardous voltages cause severe injury or death.

Disconnect all sources of power before servicing.

WARNING: Hazardous voltage! Disconnect power before servicing.

CAUTION: Do not use bulbs that exceed the recommended wattage specified on the fixture.

Warranty

1-YEAR LIMITED WARRANTY

The manufacturer warrants that this product will be free from defects in material and workmanship for one (1) year following the date of shipment. If any of the warranted products are found by the manufacturer to be defective, such products will, at the manufacturer’s option, be replaced or repaired at manufacturer’s cost. The parties hereto expressly agree that the buyer’s sole and exclusive remedy against the manufacturer shall be for the repair or replacement of defective products as provided herein, or, at the manufacturer's sole option, the manufacturer may refund the purchase price of the products. The foregoing warranty is in lieu of all other warranties, expressed or implied, including those of merchantability, fitness for any particular purpose, or infringement. No affirmation of the manufacturer, by words or action, other than set forth in this paragraph shall constitute a warranty. Goods which may be sold by the manufacturer, but which are not manufactured by the manufacturer, are not warranted by the manufacturer, but are sold only with the warranties, if any, of the manufacturer thereof.

This warranty does not cover bulbs or finish on outdoor product. In addition, it does not cover labor or other costs or expenses to remove or install any defective, repaired, or replaced product. The manufacturer's warranty does not apply to any products that have been subjected to misuse, mishandling, misapplication, neglect (including, but not limited to improper maintenance), accident, improper installation, modification (including, but not limited to use of unauthorized parts or attachments), adjustment, or repair.

2

Pre-Installation

Please read and understand this entire manual before attempting to assemble, operate, or install the product.

NOTE: Before beginning assembly of this product, make sure all parts are present. If any part is missing or damaged, do not attempt to assemble the product.

TOOLS REQUIRED

Claw hammer Safety goggles

Phillips screwdriver

Electrical tape Ladder Wire strippers

HARDWARE INCLUDED

Pliers

AA BB CC DD EE

Part Description

CC

DD

EE

AA Wire Connector

BB Short Machine Screw

Hex Nut

Mounting Bracket

Threaded Nipple

Quantity

3

1

1

3

2

3

HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Pre-Installation (continued)

PACKAGE CONTENTS

C

E

D

A

F

G

L

I

B

H

K

J

E

F

C

D

Part Description

A

B

Canopy

Threaded Socket

Screw Collar Ring

Screw Collar Loop

Chain

Fixture Loop

Quantity

1

1

1

5

1

1

K

L

J

I

Part Description

G

H

Threaded Post

Threaded Socket Ring

Inner Shade

Outer Shade

Arm Support Ring

Arm

4

Quantity

1

5

1

5

5

5

Installation

1

Installing the mounting bracket

Orient the mounting bracket (DD) so that the raised center portion protrudes into the outlet box.

Connect the mounting bracket (DD) to the outlet box with machine screws (BB).

Screw the threaded nipple (EE) into the screw collar loop (D) a minimum of 1/4 in. Lock it in place with a hex nut (CC).

Thread another hex nut (CC) to the center of the threaded nipple (EE), and screw the threaded nipple (EE) into the mounting bracket (DD). Lock the threaded nipple (EE) in place with a hex nut

(CC).

DD

BB

CC

EE

D

2

Attaching the canopy

Pass the canopy (A) over the screw collar loop (D).

Turn the screw collar loop (D) in or out of the mounting bracket (DD) until 1/2 of the screw collar loop (D) exterior threads are exposed.

After a desired position is found, lock the threaded nipple (EE) in place by tightening the second hex nut (CC) up against the mounting bracket (DD).

Attach the screw collar ring (C) to the screw collar loop (D).

DD

D

CC

EE

A

C

5

HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Installation

3

Making the electrical connections

DANGER: Hazardous voltages cause severe injury or death.

Disconnect all sources of power before servicing.

Make the wiring connections using the wire connectors (AA) according to the diagram.

Wrap the ground wire from the outlet box around the ground screw on the mounting bracket (DD) no less than 2 in. from the end of the wire.

If the fixture is supplied with a ground wire, connect it to the outlet ground wire with a wire connector (AA).

NOTE: For installation in Canada, if the fixture is supplied with a ground wire, wrap it around the ground screw on the mounting bracket (DD), and tighten the ground screw.

NOTE: When parallel wire (SPT I & SPT II) is used, the neutral wire is square shaped and ridged and the hot wire will be round in shape and smooth.

BARE COPPER, OR

GREEN GROUND

SUPPLY WIRE

BLACK SUPPLY

WIRE

WHITE SUPPLY

WIRE

BLACK SUPPLY

WIRE

WHITE SUPPLY

WIRE

4

Attaching the fixture loop

Screw the fixture loop (F) onto the threaded post

(G).

G

BARE COPPER, OR

GREEN GROUND

FIXTURE WIRE

BLACK FIXTURE

WIRE

WHITE FIXTURE

WIRE

OR

PARALLEL FIXTURE CORD

(ROUND AND SMOOTH)

PARALLEL FIXTURE CORD

(“D” SHAPED AND RIDGED)

F

6

Installation

5

Hanging the fixture

Attach the chain (E) to the screw collar loop (D).

Raise the fixture up, and attach the chain (E) to the fixture loop (F).

F

D

E

6

Installing the arm support ring

Insert the stand-offs on the arms support ring (K) into the arms (L).

NOTE: Be sure the fixture arms are spaced evenly before installing the arm support ring.

L

K

7

HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Installation

6

Installing the bulbs and shades

Lower the inner shade (I) over the threaded socket

(B) and and secure it with the threaded socket ring

(H).

Lower the outer shade (J) onto the inner shade (I) so that it rests comfortably on top.

Repeat this process for the remaining fixture arms

(L).

Install five 60W max., candelabra base bulbs (not included) into the threaded sockets (B).

I

B

H

J

Care and Cleaning

When replacing bulbs, use 60W max., candelabra base bulbs.

Always be certain that the electric current is turned off before cleaning this item.

Use a soft, moist cloth with mild, non-abrasive soap to clean the fixture. Never use glass cleaner on the fixture, as it will damage the metal finish.

All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher.

Troubleshooting

Problem

The fixture does not light.

Solution

Check the wiring.

Replace the bulb(s).

8

Service Parts

Chandelier

AA BB CC DD EE A

C D E F H I

J K

DD

EE

A

C

AA

BB

CC

Part Description

Wire Connector

Short Machine Screw

Hex Nut

Mounting Bracket

Threaded Nipple

Canopy

Screw Collar Ring

Part #

WC001

SCR832X050

NUT832

XBAR01

TN18200

C89547

SCG-MIZ

J

K

I

H

D

E

F

Part Description

Screw Collar Loop

Chain

Fixture Loop

Threaded Socket Ring

Inner Glass

Outer Glass

Arm Support Ring

9

Part #

SCL-MIZ

CHAIN-MIZ

FL89547

LR040

IG89547

OG89547

ASR89547

HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Questions, problems, missing parts? Before returning to the store, call Hampton Bay customer service

8 a.m.-6 p.m., EST Monday-Friday

1-877-527-0313

HAMPTONBAY.COM

Retain this manual for future use.