Hampton Bay 89542 Installation Guide

Item #000-000
Model #89542
USE AND CARE GUIDE
5-LIGHT CHANDELIER
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-877-527-0313
HAMPTONBAY.COM
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this fixture. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Hampton Bay!
Table of Contents
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Service Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety Information
1.
2.
3.
4.
5.
6.
Read and understand all instructions and illustrations completely
before proceeding with assembly and installation of this fixture.
Never attempt any work without shutting off the electricity.
Go to the main fuse box, or circuit breaker, in your home. Place the
main power switch in the “OFF” position and unscrew the fuse(s), or
switch off the circuit breaker switch(es), that control the power
to the fixture or room that you are working on.
Place the wall switch in the "OFF" position. If the fixture to be
replaced has a switch or pull chain, place it in the "OFF" position.
If you have any doubts about how to install this lighting fixture, or
if the fixture fails to operate completely, please contact a licensed
electrical contractor.
All parts must be used as indicated in these instructions. Do not
substitute any parts, leave parts out, or use any parts that are
worn-out or broken. Failure to obey this instruction could
invalidate the ETL listing and/or C.S.A. certification of this fixture.
DANGER: Hazardous voltages cause severe injury or death.
Disconnect all sources of power before servicing.
WARNING: Hazardous voltage! Disconnect power before
servicing.
CAUTION: Do not use bulbs that exceed the recommended
wattage specified on the fixture.
Warranty
1-YEAR LIMITED WARRANTY
The manufacturer warrants that this product will be free from defects in material and workmanship for one (1) year following the date of
shipment. If any of the warranted products are found by the manufacturer to be defective, such products will, at the manufacturer’s option,
be replaced or repaired at manufacturer’s cost. The parties hereto expressly agree that the buyer’s sole and exclusive remedy against the
manufacturer shall be for the repair or replacement of defective products as provided herein, or, at the manufacturer's sole option, the
manufacturer may refund the purchase price of the products. The foregoing warranty is in lieu of all other warranties, expressed or implied,
including those of merchantability, fitness for any particular purpose, or infringement. No affirmation of the manufacturer, by words or
action, other than set forth in this paragraph shall constitute a warranty. Goods which may be sold by the manufacturer, but which are not
manufactured by the manufacturer, are not warranted by the manufacturer, but are sold only with the warranties, if any, of the manufacturer
thereof.
This warranty does not cover bulbs or finish on outdoor product. In addition, it does not cover labor or other costs or expenses to remove or
install any defective, repaired, or replaced product. The manufacturer's warranty does not apply to any products that have been subjected to
misuse, mishandling, misapplication, neglect (including, but not limited to improper maintenance), accident, improper installation, modification (including, but not limited to use of unauthorized parts or attachments), adjustment, or repair.
2
Pre-Installation
Please read and understand this entire manual before attempting to assemble, operate, or install the product.
NOTE: Before beginning assembly of this product, make
sure all parts are present. If any part is missing or damaged,
do not attempt to assemble the product.
TOOLS REQUIRED
Claw hammer
Safety goggles
Phillips
screwdriver
Wire strippers
Electrical tape
Ladder
Pliers
HARDWARE INCLUDED
GND
NOTE: Hardware not shown to actual size
.
AA
BB
DD
CC
Part
Description
AA
Wire Connector
3
BB
Short Machine Screw
2
CC
Hex Nut
3
DD
Mounting Bracket
1
EE
Threaded Nipple
1
EE
Quantity
3
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Pre-Installation (continued)
PACKAGE CONTENTS
A
C
D
E
F
H
G
I
J
L
K
B
Part
Description
A
B
Canopy
Threaded Socket
C
D
E
F
Screw Collar Ring
Screw Collar Loop
Chain
Fixture Loop
Quantity
Part
1
G
H
Threaded Post
Threaded Socket Ring
1
I
J
K
L
Inner Shade
Outer Shade
Bobeche
Arm
5
5
5
5
1
1
1
1
4
Description
Quantity
5
5
Installation
1 Installing the mounting bracket
Orient the mounting bracket (DD) so that the
raised center portion protrudes into the outlet box.
Connect the mounting bracket (DD) to the outlet
box with machine screws (BB).
Screw the threaded nipple (EE) into the screw
collar loop (D) a minimum of 1/4 in. Lock it in
place with a hex nut (CC).
Thread another hex nut (CC) to the center of the
threaded nipple (EE), and screw the threaded
nipple (EE) into the mounting bracket (DD). Lock
the threaded nipple (EE) in place with a hex nut
(CC).
DD
BB
CC
EE
D
2 Attaching the canopy
Pass the canopy (A) over the screw collar loop (D).
Turn the screw collar loop (D) in or out of the
mounting bracket (DD) until 1/2 of the screw collar
loop (D) exterior threads are exposed.
After a desired position is found, lock the threaded
nipple (EE) in place by tightening the second hex
nut (CC) up against the mounting bracket (DD).
Attach the screw collar ring (C) to the screw collar
loop (D).
DD
CC
EE
A
D
C
5
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Installation
3
Making the electrical connections
BARE COPPER, OR
GREEN GROUND
FIXTURE WIRE
BARE COPPER, OR
GREEN GROUND
SUPPLY WIRE
DANGER: Hazardous voltages cause severe injury or death.
Disconnect all sources of power before servicing.
Make the wiring connections using the wire
connectors (AA) according to the diagram.
Wrap the ground wire from the outlet box around
the ground screw on the mounting bracket (DD)
no less than 2 in. from the end of the wire.
If the fixture is supplied with a ground wire,
connect it to the outlet ground wire with a wire
connector (AA).
BLACK SUPPLY
WIRE
BLACK FIXTURE
WIRE
WHITE SUPPLY
WIRE
WHITE FIXTURE
WIRE
OR
BLACK SUPPLY
WIRE
NOTE: For installation in Canada, if the
fixture is supplied with a ground wire, wrap it
around the ground screw on the mounting
bracket (DD), and tighten the ground screw.
PARALLEL FIXTURE CORD
(ROUND AND SMOOTH)
PARALLEL FIXTURE CORD
(“D” SHAPED AND RIDGED)
WHITE SUPPLY
WIRE
NOTE: When parallel wire (SPT I & SPT II)
is used, the neutral wire is square
shaped and ridged and the hot wire will
be round in shape and smooth.
4
Attaching the fixture loop
Screw the fixture loop (F) onto the threaded post
(G).
F
G
6
Installation
5
Hanging the fixture
Attach the chain (E) to the screw collar loop (D).
Raise the fixture up, and attach the chain (E) to the
fixture loop (F).
D
E
F
6
H
Installing the bulbs and shades
I
Pass the bobeche (K) over the threaded socket (B).
Pass the outer shade (J) and inner shade (I) over
the threaded socket (B), and secure them with the
threaded socket ring (H).
Repeat this process for the remaining fixture arms
(L).
Install five 100W max., medium base bulbs (not
included) into the socket assemblies (B).
J
K
B
7
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Care and Cleaning
When replacing bulbs, use 100W max., medium base bulbs.
Always be certain that the electric current is turned off before cleaning this item.
Use a soft, moist cloth with mild, non-abrasive soap to clean the fixture. Never use glass cleaner on the fixture, as it will damage the
metal finish.
All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic
dishwasher.
Troubleshooting
Problem
Solution
The fixture does not light.
Check the wiring.
Replace the bulb(s).
8
Service Parts
GND
Chandelier
AA
BB
C
D
J
Part
Description
DD
CC
F
E
EE
H
A
I
K
Part #
Part
Description
Part #
AA
BB
Wire Connector
Short Machine Screw
WC001
SCR832X050
D
E
Screw Collar Loop
Chain
SCL-OZ
CHAIN-OZ
CC
DD
EE
A
Hex Nut
Mounting Bracket
Threaded Nipple
Canopy
NUT832
XBAR01
TN18200
C89542
C
Screw Collar Ring
SCG-OZ
F
H
I
J
K
Fixture Loop
Threaded Socket Ring
Inner Glass
Outer Glass
Bobeche
FL89542
LR009
IG89542
OG89542
B89542
9
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay customer service
8 a.m.-6 p.m., EST Monday-Friday
1-877-527-0313
HAMPTONBAY.COM
Retain this manual for future use.