Spectre 3G-W Series Cellular Router Datasheet

Spectre 3G-W Series Cellular Router Datasheet
Cellular Router - Wi-Fi
Spectre 3G-W Series
PRODUCT FEATURES
•
•
•
•
•
•
The Spectre 3G-W cellular router is a single box solution that provides
local M2M network connectivity via its built-in Wi-Fi hotspot, Ethernet
10/100 and I/O ports and connects to the Internet via CDMA and HSPA+
cellular telephone networks. The Spectre 3G-W also creates reliable mobile
Ethernet connections.
With upload speeds of up to 5.7 Mbps and download speeds of up to 14.4
Mbps, the Spectre 3G-W provides ample bandwidth, even for applications
that require video. The standard configuration includes multiple 10/100
Ethernet ports, one USB host port, one binary input/output (I/O) port and
dual SIM card holders. The second SIM card holder provides network
redundancy, as the router can automatically switch between cellular
service providers if one connection fails.
Creates a Wi-Fi hotspot for M2M applications
Modbus compatible
Modular design to fit application requirements
Dual SIM Cards for redundant backhaul
Up to 5.7 Mbps upload/14.4 Mbps download
LINUX platform & advanced networking functions
Ordering Information
Model
Ethernet USB I/0 Rs232
Number
10/100
RT3G-300-W
1
1
1
RT3G-310-W
2
1
1
RT3G-320-W
1
1
1
1
RT3G-330-W
1
1
1
RT3G-340-W
1
1
1
RS422/485
I/0 Input/
output
1
1
USA, Canada.
Check with your local distributor for availability and options.
Accessories
MDR-20-24 24VDC, 20W, 1 A power supply C5UMB3FBG
Category 5E UTP 3 ft/1 m - Beige C5UMB10FBL
Category 5E 10 ft/3 m - Blue
Antenna options available
The router supports the creation of VPN tunnels using IPsec, OpenVPN
and L2TP. It supports DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by
SMS, and numerous other functions, as well as additional software like
SmartCluster VPN Server and R-SeeNet. A password-protected Web
interface allows users to configure and manage the SPECTRE 3G from
remote locations. The router can automatically upgrade its configuration
and firmware from the operator’s central server, allowing for simultaneous
mass reconfiguration of every router on the network.
Certified for use with these networks:
AT&T, T-Mobile, Rogers, Sprint, Verizon
Contact B&B Electronics for the latest approvals.
76 mm
42 mm
Users may insert Linux scripts and they can create up to four different
configurations for the same router. Examples would include the SMS and
binary input configurations. Users may switch from one configuration to
another at any time.
Mechanical diagram
42 mm
113 mm
AUX
113 mm
www.bb-elec.com
|
Spectre 3G-W Series_3713ds
Cellular Router - Wi-Fi
Spectre 3G-W Series
Specifications
Interfaces
Standard
Ethernet
10/100 Mbits
USB
USB Type A Host
Binary I/O
1 input / 1 output
SIM 1
SIM Card
SIM 2
SIM Card
Expansion Port Options
Port 1 Ethernet 10/100
RS-232/422/485
Modbus
CNT (I/O)
Port 2 RS-232/422/485
Modbus
CNT (I/O)
I/O CNT 4 Binary inputs, 1 Binary output (2 inputs maybe
configured as counters)
2 Analog inputs, I Binary output
Antenna:
Cellular & Wi-Fi
SMA – 50 Ohm
3G: 2 dBi, penta band, right angle dipole (2). WiFi: 1.8 dBi right angle dipole (1)
Frequency bands
Quad Band UMTS (WCDMA): 850, 900,1900 and 2100 MHz+
Quad-Band GSM/GPRS/EDGE: 850, 900, 1800 and 1900 MHz
Power
Source
10 – 30 VDC
300 mW receive mode
Consumption
Up to 3.5 W (GPRS transmission)
Up to 5.5 W (UMTS/HSDPA transmission)
Mechanical
Dimensions
42x76x113 mm/1.7x3.0x4.5 in (DIN 35 mm)
Enclosure
Metal
Weight
150 g
Environmental
Operating Temperature
-30 to 60°C
Storage Temperature
-40 to 85°C
[email protected]
[email protected]
Features
WIFI Specifications
RX Sensitivity
TX Output power
(802.11 b/g/n)
11b
11g
(HT20) 11n
(HT20) 11n 11b,
11g,
802.11n
802.11n
2.4 GHz
11Mbps
54Mbps
MSC7
MSC7
11Mbps
54Mbps
(HT20)
(HT20)
-85 dBm
-70 dBm
-66 dBm
-62 dBm
19 dBm
16 dBm
15 dBm
15 dBm
Frequency band
Networking
DHCP – automatic IP addressing in LAN network
NAT – IP address and ports translation between inside/outside network
Firewall: filtering of addresses, ports, protocols
VRRP – virtual backup router function
DynDNS client – access to the router with a dynamic IP address
VLAN 802.11Q: virtual LAN
QoS: quality of service
Dial-in – Communicate via CSD call
NTP client, NTP Server: time synchronization
PPPoE Bridge – PPP frames encapsulation inside ETH frames
VPN Tunneling
IPsec, OpenVPN, L2TP – secure encrypted tunnels
GRE tunnel – simple tunnel without security measures
Configuration and Diagnostics
HTTP server – configuration via web server
Telnet – configuration and access to the file system
SNMP – router diagnostics, communication with I/O and M-Bus
Cellular state signalization by LED
On-line info on cellular signal status (level, cell, neighbors)
SMS info – power on, cellular connection or disconnection
SMS control – on/off cellular connection, switch SIM, I/O, etc.
Transferred data counting, one more APN as backup
Remote router group configuration change, switching among configuration profiles
SSH – encrypted configuration and access to the file system
Additional Functions
Linux based: program your own applications
NTP client, NTP Server – time synchronization
SMS communication – AT commands on RS232, Ethernet and I/O
M-RAM memory inside – router statistic saved into memory
Approvals / Certifications
FCC Part 15
GGSM: AT&T, Rogers, T-Mobile
Certifications
CDMA: Sprint, Verizon
EN 301 511, v9.0.2
EN 301 908-1&2, v3.2.1
CE
ETSI EN 301 489-1 V1.8.1
EN 60950-1:06 ed.2 + A11:09 + A1:10
Emission
EN 55022/B
Immunity
ETS 300 342
Safety
EN 60950
Isolation
EN 60747
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement