Hampton Bay | 03236-4 | Installation guide | Hampton Bay 03236-4 Installation Guide

Item #000-000
Model #03236-4
INSTALLATION GUIDE
1 LIGHT PENDANT
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-877-527-0313
HAMPTONBAY.COM
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this light. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for
choosing Hampton Bay!
Table of Contents
Tools required ..........................................................................3 Hardware Included ...................................................................3 Package Contents ....................................................................4 Installation ..................................................................... 5 Table of Contents .......................................................... 2 Safety Information......................................................... 2 Warranty ......................................................................... 2 Pre-Installation .............................................................. 3 Planning Installation ................................................................3 Safety Information
Turn off the electricity and read this instruction manual before
installation.
WARNING: To reduce the risk of fire or injury, use this
light indoors only.
The installation must be handled by a qualified electrician with a
license.
WARNING: Risk of electric shock. Do not operate the
luminaire with a missing or damaged shield. Do not use if
there is any damage to the light or cord insulation. Inspect
periodically.
Ensure that the power is turned off before replacing the bulb and
cleaning the fixture.
Warranty
ONE YEAR MANUFACTURER WARRANTY
WHAT IS COVERED
The manufacturer warrants this light fixture to be free from defects in materials and workmanship for a period of one (1) year from date of
purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product
is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the
neglect or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, setup, or used in any
way not in accordance with the instruction supplied with the product. This warranty shall not apply to a failure of the product as a result of
an accident misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material or workmanship.
wear and tear.
WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance
with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse,
abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall
not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear. The
manufacturer does not warrant and specially disclaims any warranty, whether express or implied, of fitness for a particular purpose, other
than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or
incidental loss or damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-877-527-0313 or visit www.HamptonBay.com.
2
Pre-Installation
PLANNING INSTALLATION
Compare all parts with the Hardware Included and Package Contents lists below. If any part is missing or damaged, do not install this
product. Call the Customer Service Team at 1-877-527-0313 or visit www.HamptonBay.com.
TOOLS REQUIRED
Phillips
screwdriver
Wire
cutters
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA
Part
BB
Description
CC
DD
EE
FF
Quantity
AA
Wire connector
3
BB
Mounting bar with screws
1
CC
Mounting screw
2
DD
Mounting nut
2
EE
Rubber washer
4
FF
Nut
4
3
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Pre-Installation (continued)
PACKAGE CONTENTS
NOTE: This product does not come with a bulb. You
will need to supply one 60-Watt max. Type A bulb or
energy saving equivalent (LED or CFL).
A
D
B
E
F
C
Part
Description
Quantity
A
Canopy
1
B
Frame
1
C
Glass plate
2
D
Steel bracket with decoration
1
E
Socket
1
F
Socket ring
1
4
Installation
1 Installing the mounting bar
□
2 Connecting the wires
□
Attach the mounting bar with preassembled screws (BB) to
the outlet box using the mounting screws (CC). Ensure the
preassembled screws are pointing down from the outlet
box.
□
□
□
Connect the “L” live wire from the light to the black live
wire from the main power supply. Connect the “N” neutral
wire from the light to the white neutral wire from the main
power supply. Connect the earth (ground) bare copper wire
from the light and the green earth (ground) wire from the
main power to the green screw on the mounting bar (BB).
Connect each wiring connection using wire connectors (AA)
and gently tuck all connections into the outlet box.
Fasten the canopy (A) to the mounting bar (BB) by inserting
the canopy (A) through the screws of the mounting bar (BB)
and securing in place with the nuts (DD).
To adjust the fixture to your desired hanging length,
unscrew the nut on the canopy (A) and then shorten or
lengthen the fixture cord to the desired length.
AA
BB
CC
BB
A
DD
5
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Installation (continued)
3
□
Attaching the glass shades to the
frame
4
□
Attach the glass plates (C) to the frame (B) with rubber
washers (EE), and nuts (FF).
Attaching the steel bracket to the
frame
Attach the steel bracket with decoration (D) to the frame (B)
using the nuts that are preassembled to the steel bracket
(D).
EE
C
D
FF
B
B
5 Installing the bulb
□
□
□
Attach the frame (B) to the socket (E) using the socket ring
(F).
Install the bulb (not included) into the socket (E).
Verify that the installation is complete and turn on the
power.
E
C
D
B
F
6
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-877-527-0313
HAMPTONBAY.COM
Retain this manual for future use.
Download PDF