schedule of quantities

schedule of quantities
SCHEDULE OF QUANTITIES
Name of work: Construction of Archery Competition venue
and Training venues for Archery, Hockey & Lawn Bowls
and refurbishment of training venues for Aquatics and
Rhythmic Gymnastics at Yamuna Sports Complex for
Commonwealth Games, 2010.
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
1.0 Earth Work
1.1 Earth work in excavation by mechanical means
(Hydraulic excavator) / manual means over areas
(exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on
plan) including disposal of excavated earth, lead up to 50 m
and lift up to 1.5 m, disposed earth to be leveled and neatly
dressed.
All kinds of soil
cum
3445.00
cum
3329.00
cum
6322.00
1.2 Earth work in excavation by mechanical
means (Hydraulic excavator) / manual
means in foundation trenches or drains
(not exceeding 1.5 m in width or 10 sqm
on plan) including dressing of sides and
ramming of bottoms, lift upto 1.5 m,
including getting out the excavated soil
and disposal of surplus excavated soil as
directed, within a lead of 50 m. for all kinds
of soil.
1.3 Filling
available
excavated
earth
(excluding rock) in trenches, plinth, sides
of foundations etc. in layers not exceeding
20cm in depth, consolidating each
deposited layer by ramming and watering,
lead up to 50 m and lift upto 1.5 m.
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
1.4 Excavating trenches of required width for
pipes, cables, etc including excavation for
sockets, and dressing of sides, ramming
of bottoms,depth upto 1.5 m including
getting out the excavated soil, and then
returning the soil as required, in layers not
exceeding 20 cm in depth including
consolidating each deposited layer by
ramming, watering,etc. and disposing of
surplus excavated soil as directed, within
a lead of 50 m :
a) All kinds of soil.
Pipes, cables etc. exceeding 80 mm dia.
Metre
but not exceeding 300 mm dia.
418.00
1.5 Extra for every additional lift of 1.5 m or
part thereof in.
cum
All kinds of soil.
2252.00
1.6 Supplying and filling in plinth with Jamuna
sand under floors including, watering,
ramming consolidating and dressing
complete.
cum
2718.00
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
2.0 Concrete Work
2.1 Providing and laying in position ready
mixed concrete manufactured in fully
automatic batching plant and transported
to site of work in transit mixer for all leads
and lifts having continuous agitated mixer,
manufactured as per mix design of
specified grade for cement concrete work
including pumping of R.M.C. from transit
mixer to site of laying , excluding the cost
of centering, shuttering and finishing but
including
cost
of
admixtures
in
recommended proportions as per IS :
9103 to accelerate/ retard setting of
concrete, improve workability without
impairing strength and durability as per
direction of the Engineer - in - charge. M25 grade Cement concrete by using 410kg
of cement per cum of concrete. All works
up to floor V level.
cum
486.00
cum
2099.00
2.2 Providing and laying in position ready
mixed concrete manufactured in fully
automatic batching plant and transported
to site of work in transit mixer for all leads
and lifts having continuous agitated mixer,
manufactured as per mix design of
specified grade for cement concrete work
including pumping of R.M.C. from transit
mixer to site of laying , excluding the cost
of centering, shuttering and finishing, but
including the cost of admixtures in
recommended proportions as per IS :
9103 to accelerate/ retard setting of
concrete, improve workability without
impairing strength and durability as per
direction of the Engineer - in - charge. M10 grade cement concrete by using 164 kg
of cement per cum of concrete. All works
up to floor V level.
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
2.3 Making plinth protection 50mm thick of
cement concrete 1:3:6 (1 cement :3
coarse sand : 6graded stone aggregate
20mm nominal size) over 75mm bed of
dry brick ballast 40mm nominal size well
rammed and consolidated and grouted
with fine sand including finishing the top
smooth
Quantity
sqm
596.00
3.1 Centering
and
shuttering
including
strutting, propping etc. and removal of
form for :
a Foundations, footings, bases of columns,
sqm
etc. for mass concrete.
2659.00
b Suspended
floors,
roofs,
landings,
balconies and access platform. with water
sqm
proof ply 12mm thick.
15963.00
c Lintels, beams, plinth beams, girders,
bressumers and cantilevers. with water
sqm
proof ply 12mm thick.
6231.00
d Columns, Pillars, Piers, Abutments, Posts
sqm
and Struts.
3444.00
e Stairs(excluding landings) except spiral
sqm
staircases
323.00
f Small lintels not exceeding 1.5m clear
span, moulding as in cornices, window
sqm
sills, string courses, bands,
178.00
g Edges of slabs and breaks in floors and
walls
Meter
Under 20cm wide
607.00
Rate in fig. and
in Words (INR) Amount in INR
3.0 Reinforced Cement Concrete Work
h Walls (any thickness) including attached
pilasters, butteresses, plinth and string
sqm
courses, etc.
1793.00
i Vertical and horizontal fins individually or
forming box louvers band, facias and
sqm
eaves boards
118.00
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
3.2 Reinforcement for R.C.C work including
straightening, cutting, bending, placing in
position
binding
and
anticorrosive
treatment of reinforcement bars as per
specifications by making slurry to cement
by adding inhibitor solution to cement in
the ratio 0.6:1 (0.6/600 c.c. 0f inhibitor : 1
cement) or as specified by the
manufacturer(Fe500).
a Thermo-Mechanically Treated bars.
kg
496398.00
3.3 Providing and laying in position ready
mixed concrete manufactured in fully
automatic batching plant and transported
to site of work in transit mixer for all leads
and lifts having continuous agitated mixer,
manufactured as per mix design of
specified grade for reinforced cement
concrete work including pumping of
R.M.C. from transit mixer to site of laying ,
excluding the cost of centering, shuttering
finishing and reinforcement but including
the cost of admixtures in recommended
proportions as per IS : 9103 to accelerate/
retard setting of concrete, improve
workability without impairing strength and
durability as per direction of the Engineer in - charge. M-25 grade Reinforced
cement concrete by using 410kg of
cement per cum of concrete. All works up
to floor V level.
cum
4964.00
3.4 Extra for providing M-30 grade concrete
by using 420kg of cement per cum of
concrete instead of M-25 grade B.M.C/
R.M.C..
cum
431.00
3.5 Deduct for using less cement than the
quantity as provided in the item of batch
mix concrete/RMC as arrived as per mix
design.
quintal
491.50
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
4.0 Brick Work
4.1 Brick work with Cement flyash brick of
class designation 75 in foundation and
plinth with cement mortar 1:6 (1 cement :
6 coarse sand).
Unit
Quantity
cum
638.00
Cement Mortar 1:6 (1 cement:6 coarse
cum
sand)
2508.00
Rate in fig. and
in Words (INR) Amount in INR
4.2 Brick work with Cement Flyash Bricks of
class designation 75
in superstructure
above plinth level upto floor five level in:
4.3 Half Brick masonry with Cement Flyash
bricks of Class designation 75 in super
structure above plinth level upto floor V
level with Cement mortar 1:4 (1 cement:4
coarse sand).
sqm
3642.00
4.4 Extra for providing and placing in position
2 Nos. 6mm dia. M.S. bars at every third
course of half brick masonry.
sqm
3642.00
4.5
Providing and laying Gypsum panel
partitions 100mm thick with water proof
Gypsum panels of size 666x500x100mm,
made of calcite phosphor Gypsum fixed
with tongue and groove, jointed with
bonding plaster as per manufacturers
specifications in superstructure above
plinth level up to floor V level. Gypsum
blocks will have a minimum compressive
strength of 9.3 kg/cm2
YAMUNA SPORTS COMPLEX
sqm
755.00
TENDER
S.No. Description of Item
Unit
Quantity
5.0 Wood Work
5.1 Providing and fixing ISI marked flush door
shutters conforming to IS: 2202 (Part I)
non-decorative type, core of block board
construction with frame of 1st class hard
wood and well matched commercial 3mm
ply veneering with vertical grains or cross
bands and face veneers on both faces of
shutters :
a 35 mm thick including ISI marked
Stainless Steel butt hinges with necessary
sqm
screws.
603.00
b Extra for providing lipping with 2nd class
teak wood battens 6 mm minimum depth
on all edges of shutters (over all area of
door shutter to be measured) Over item
no. 5.1
sqm
603.00
5.2 Deduct if fixed shutters (without hinges)
are provided instead of openable shutters
for doors, windows or clerestory windows
with :
a Stainless steel butt hinges with stainless
sqm
steel screws :
603.00
5.3 Providing and fixing stainless steel Handle
with Mortice Lockset of Make - Dorset
Model No.SDORSS, or superior or
equivalent as approved by the Engineer- each
in-Charge.
pair
166.00
Rate in fig. and
in Words (INR) Amount in INR
5.4
Providing and fixing double action
hydraulic floor spring of approved brand
and manufacture IS : 6315 marked, for
doors including cost of cutting floors as
required, embedding in floors and cover
plates with brass pivot and single piece
M.S. sheet outer box with slide plate etc.
complete as per the direction of Engineerin-charge.
With stainless steel cover plate
YAMUNA SPORTS COMPLEX
each
154.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
5.5 Providing and fixing Floor Spring for doors with width
upto 1100mm or weight upto 120 Kgs of DORMA
BTS 75 V, Größe EN 1-4, or equivalent or better,
universal floor spring to DIN EN 1154, with adjustable
closing force and closing speed. Closing action effective
from approx. 175°, with full hydraulic sequential control
and backcheck. Including cement box,replaceable spindle
and cover plate. Non-handed; also suitable for double
action doors. Cover plate material and finish: stainless
steel. as per sample approved by Engineer-in-charge.
each
23.00
5.6 Providing and fixing frame less glass
sliding double door with fittings including
providing glass panel height 3000mm,
width 1400mm (or as per site
requairements) and thickness 12mm .Max.
weight Capacity 150 kg including one set
of runnerrs / carriers manufactured by
Dorma or equivalent or better make all
complete as per directions of Engineer -incharge.
5.7 Supplying and fixing of dorma or equivalent approved
make fire rated for double leaf panic exit devices to the
entire satisfaction of Engineer-in-charge.
YAMUNA SPORTS COMPLEX
sqm
108.00
each
24.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
6.0 Steel Work
6.1 Structural steel work in single section fixed
with or without connecting plate including
cutting, hoisting, fixing in position and
applying a priming coat of approved steel
primer all complete.
kg
23823.00
kg
4022.00
Kg
4516.00
6.4 Welding by gas or electric plant including
transportation of plant at site etc.
cm
complete.
31800.00
6.5 Providing and fixing bolts including nuts
Kg
and washers complete.
1020.00
6.2 Steel work welded in built up sections/ framed work
including cutting, hoisting, fixing in position and applying
a priming coat of approved steel primer using structural
steel etc. as required.
In stringers, treads, landings etc. of stair cases including
use of chequered plate wherever required, all complete.
6.3 Steel work in built up tubular trusses
including cutting, hoisting fixing in position
and applying a priming coat of approved
steel primer, welded and bolted including
special shaped washers etc. complete.
Hot finished welded type tubes.
6.6 Steel work welded in built up sections/
framed work including cutting,hoisting,
fixing in position and applying a priming
coat of approved steel primer using
structural steel etc. as required.
In gratings, frames, guard bar, ladder,
railings, brackets,gates and similar works.
YAMUNA SPORTS COMPLEX
Kg
974.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
6.7 Fabrication, supply and installation of
perforated steel rolling door shutter (50%
perforations) with Laths and top cover
made out of 1.25mm TCT Colour Coated
Galvanized steel sheets/strips complete
with necessary Guide Channels, Top
shaft, Ball bearings, Top cover and Lock
plate etc. finished in Polymer powder
Coated finish of thickness not less then
50 microns of approved colour shade to
the entire satisfaction of Engineer-incharge.
6.8 Extra for providing mechanical device
chain and crank operation for operating
rolling shutters.
upto 16.80 sqm in the area.
sqm
62.00
sqm
62.00
6.9 Providing,fabricating,transportation,assemblin
g,hoisting and erection of 3-dimensional
Spatial structure trusses made of structural
steel, plates, structural steel hollow sections
conforming to IS 1161 (circular tubes), IS 4923
(Rectangular tubes) having yield strength >
310 MPA), as well as structural steel, to the
required profile and shape as per relevant
architectural and structural drawings /
specifications.
This item includes submission of fabrication
shop drawings and getting the same approved
by the Engineer In Charge, necessary
templates,adequate
temporary
supports
scaffolding/staging, all cutting grinding,welding
(using automatic submerged arc welding and
gas metal ARC (MIG) wherever specified) & all
labour,tools,plants
&
equipments
and
operations etc . for all heights/lifts and leads
required to complete the job as per drawings
and specifications.All the structural steel shall
be finished with acrylic polysiloxane coatings
(for high performance aesthetics and
anticorrosion protection) item also include all
tests on materials and welded fabricated parts
as per specification and direction of Engineerin-charge.
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
All the work will be fabricated at workshop,no
fabrication will be allowed at site of work. The
rate includes all labour & material mentioned
above and cost of transportation from
workshop to the site of work.
YAMUNA SPORTS COMPLEX
Unit
Kg
Quantity
Rate in fig. and
in Words (INR) Amount in INR
119247.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
7.0 Flooring
7.1 Providing and Laying matt finish 8.0 mm thick, chamfered
fully vitrified tiles of size 300 x 100 mm without warpage of
approved make, in all colours fixed over 3mm (average
thick) bed polymer adhesive as per IS : 15477 (Ardex,
Endura, Ferrous crete by Manchanda Enterprises,
pidilite make) to correct line and level and plan over a
levelling layer of 12 mm thick cement mortar 1:3 (1 Cement :
3 coarse sand) with 2-3 mm joint between, the tiles grouted
with epoxy grout complete in all respects at all heights as
per direction of Engineer-in-charge. (Shade
BIANCO of Boss profiles or equivalent or better
shades of other manufacturers), as per sample approved by
Engineer-in-charge.
sqm
(ii) Shade BLANE / NOIR of Boss Profiles or
equivalent or better shades of other
manufacurer's as per the sample
approved by Engineer-in-charge
4945.00
sqm
275.00
sqm
275.00
Providing and laying C.C. pavement of mix
M25 with ready mixed concrete from batching
plant. The ready mixed concrete shall be laid
and finished with screed board vibrator ,
vacuum dewatering process and finally
finished by floating, brooming with wire brush
etc. complete as per specifications and
directions of Engineer-in-charge. (The panel
shuttering work shall be paid for separately). cum
267.00
(iii) Shade CIELO / OLIVETTA of boss profiles
or equivalent or better shades of other
manufacturer's as per the sample
approved by Engineer-in-charge.
7.2
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
7.3 Providing and fixing 18 mm thick mirror
polished, gang-saw cut granite in flooring
and similar locations of required size of
approved shade, colour and texture laid
over 20 mm thick base cement mortar
1:4(1 cement : 4 coarse sand) fixed with
cement paste / cement slurry with joints
treated with white cement, mixed with
matching pigment, epoxy touch ups,
including rubbing, curing etc. complete at
all levels to the satisfaction of Engineerin-charge.
sqm
Quantity
Rate in fig. and
in Words (INR) Amount in INR
1722.00
7.4 Providing and fixing 18 mm thick fine shot
blasted, gang-saw cut granite in flooring
and similar locations of required size of
approved shade, colour and texture laid
over 20 mm thick base cement mortar
1:4(1 cement : 4 coarse sand) fixed with
cement paste / cement slurry with joints
treated with white cement, mixed with
matching pigment, epoxy touch ups,
including rubbing, curing etc. complete at
all levels to the satisfaction of Engineerin-charge.
sqm
9596.00
7.5 Providing and fixing 18 mm thick gang
saw cut (polished and edges machine cut)
granite stone in risers of steps, skirting,
dado and pillars laid on 12mm (average)
thick cement mortar 1:3 ( 1 cement :3
coarse sand ) including pointing with white
cement slurry mixed with pigment to
match the shade of the slab including
rubbing, curring etc complete at all levels
to the satisfaction of Engineer-in-charge.
sqm
YAMUNA SPORTS COMPLEX
486.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
7.6 Providing and fixing 40mm thick shot blasted granite
flooring at stair case, external concourse, entrance steps
and internal concourse (sample of granite shall be approved
by Engineer incharge) over 20 mm thick base of cement
mortar 1:4(1 cement : 4 coarse sand) laid and joints treated
with white cement, mixed with matching pigment, epoxy
touch ups including rubbing, curing etc. complete. The
work shall be executed as per CPWD specifications
including all incidental to complete the job at all levels to
the entire satisfaction of Engineer-in-charge.
Granite of ruby red, dessert gold, steel grey or any other
colour as approved by the Engineer-in-charge. 0.2 sqm to 1
sqm size
sqm
244.00
sqm
102.00
7.7 Providing and fixing 18mm thick gang saw
cut mirror polished premoulded and
prepolished) machine cut for kitchen
platforms, vanity counters, window sills ,
facias and similar locations of required
size of approved shade, colour and texture
laid over 20mm thick base cement mortar
1:4 (1 cement : 4 coarse sand) with joints
treated with white cement, mixed with
matching pigment, epoxy touch ups,
including rubbing, curing, moulding and
polishing to edge to give high gloss finish
etc. complete at all levels, to the
satisfaction of Engineer-in-charge.
Granite of any colour and shade
Area of slab over 0.50 sqm.
7.8 Extra for providing edge moulding to
18mm thick marble stone counters,
Vanities etc. including machine polishing
to edge to give high gloss finish etc.
complete as per design approved by
Engineer-in- Charge.
metre
Granite work.
YAMUNA SPORTS COMPLEX
140.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
7.9 Extra for providing opening of required
size & shape for wash basins/ kitchen sink
in kitchen platform, vanity counters and
similar location in marble/Granite/stone
work including necessary holes for pillar
taps etc. including rubbing and polishing of
cut edges etc. complete.
each
198.00
7.10 Mirror polishing on marble work/Granite
work/stone work where ever required to
sqm
give high gloss finish complete.
102.00
7.11 Providing and laying 100 x 100 x100 thick
minimum size Delhi Quartz cobble stone
pavers laid in the pattern as shown in the
drawing laid on 75mm ( average ) thick
base of cement concrete 1:5:10
( 1
cement : 5 coarse sand : 10 graded stone
aggregate) of approved design /shape
including pointing with cement mortar 1:2
(1 cement : 2 stone dust) with admixture of
pigment to match the shade of stone,
complete, but excluding the cost of
cement concrete 1:5:10 ( 1 cement : 5
coarse sand : 10 graded stone aggregate)
as per direction of Engineer-in-charge.
sqm
YAMUNA SPORTS COMPLEX
330.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
7.12 Providing and fixing 1st quality Pool tiles
conforming to IS : 15622: 2006 (Group
Blb) of minimum thickness 9mm for
various tiles of approved make like HR
Johnson or equivalent make in all colours,
shades design and prints as approved by
Engineer-in-charge to be fixed over 3 to
4mm bed of polymer adhesive as per IS :
15477 (Ardex, Endura Ferrous crete by
Manchanda Enterprises, pidilite make) to
correct line, level and plan with 2mm joint
between the tile (method in application will
be guided by manufactures specifications)
and grouted with readymade polymer
groute (Bal Endura make or equivalent or
better make).
( 1 ) Floor & Inner wall of main swimming
pool
with
rectangular
size
tiles
247x122x9mm.
sqm
( a ) with light shade.
1665.00
sqm
185.00
metre
430.00
( b ) with dark shade.
( c) Internal cove of walls and floors
junction with size of tiles 250x50x9mm.
( d ) Internal angles of floor/wall junctions
with size of tiles 50x50x9mm each.
each
9.00
7.13 Providing and fixing glass mossaic tiles of
superior quality in any approved colour,
design and laid in pattern as directed by
Engineer-in-charge. Tiles to be fixed over
3mm (average thick) bed of approved
polymer adhesive as per IS: 15477 (Bal
Endura, Ardex, Ferrous crete by
Manchanda Enterprises, pidilite make) to
correct line, level and plumb(application
method as directed by manufracture
specification) and grouted with ready
made polymer grout.
( a ) 50x50mm.
sqm
1430.00
( b ) 20x20mm
sqm
70.00
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
7.14
Providing and laying Timber sports
Mapple Wood floors to be of 57 x 26 mm
first quality selected timber at mill grade T
& G offset rounded tounge, including all
necessary incidental works Specified
under FOP Specifications. Timber Sports
(Maple Wood) flooring of Corners / Robins
/ Harp / Better or Equivalent meeting the
requirements of Project Specifications and
Drawings as per directions of Engineer-inCharge.
sqm
YAMUNA SPORTS COMPLEX
1500.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
8.0 Roofing
8.1
Design, supply, fabrication and installation
of suitable MS structure made of M. S.
Tube, painted with suitable primer and
polyurethane paint.The Structure shall be
designed as per IS 875 for Wind Load.,
which shall be cladded with Tensile Ferrari
fabric Membrane 702-S FERRARI Fabric
or equivalent or better make, including
base plate, holding down bolts and anchor
blocks as per design.The Membrane shall
be supplied, cut and manufactured by
using high frequency PVC welding
machine, complete in all colours and
shades as per the sample approved by the
Engineer-in-charge. (The Surface Area of
the installed fabric shall be measured for
the payment)
sqm
8385.00
8.2 Painting top of roofs with bitumen of
approved quality at 17kg per 10 sqm
impregnated with a coat of coarse sand at
60 cu dm per 10sqm including cleaning
the slab surface with brushes and finally
with a piece of cloth lightly soaked in
kerosene oil complete :
With residual type petroleum bitumen of
sqm
penetration 80/100
5340.00
8.3
Making khurras 45x45 cm with average
minimum thickness of 5 cm cement
concrete 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate of 20 mm
nominal size) over P.V.C. sheet
1mx1mx400micron, finished with 12mm
cement plaster 1:3 (1 cement : 3 coarse
sand) and a coat of neat cement rounding
the edge sand making and finishing the
outlet complete.
Each
YAMUNA SPORTS COMPLEX
35.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
8.4 Providing and fixing at all height false
ceiling including providing and fixing of
frame work made of special sections
power pressed from M.S. sheet and
galvanised in accordance with zinc coating
of grade 350 as per IS : 277 and
consisting of angle cleats of size 25mm
wide x 1.6mm thick with flanges of 22mm
and 37mm at 1200mm centre to centre
one flange fixed to the ceiling with dash
fastener 12.5mm diax40mm long with
6mm dia bolts to the angle hangers of
25x25x0.55mm of required length, and
other end of angle hanger being fixed with
nut and bolts to G.I. channels
45x15x0.9mm running at the rate of
1200mm
centre to centre to which the ceiling
section 0.5mm thick button wedge of
80mm with tapered flanges of 26mm each
having clips of 10.5mm at 450mm centre
to centre shall be fixed in a direction
perpendicular to G.I. channel with
connecting clips made out of 2.64mm
diax230mm long G.I. wire at every junction
including fixing the gypsum board with
ceiling section and perimeter channels
0.5mm thick 27mm high having flanges of
20mm and 30mm long, the perimeter of
ceiling fixed to wall/partition with the help
of rawl plugs at 450mm centre to centre
with 25mm long drive-all screws @
230mm interval
including jointing and fixing to a flush finish
of tapered and square edges of the board
with recommended filler, jointing tapes,
finisher and two coats of primer suitable
for board as per manufactures
specification and also
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
including the cost of making openings for
light fittings, grills, diffusers, cutouts made
with frame of perimeter channels suitably
fixed all complete as per drawing and
specification and direction of the Engineer
in Charge but excluding the cost of
painting with :
12.5 mm thick tapered edge gypsum
sqm
board conforming to IS: 2095- Part I.
8560.00
8.5 Providing and fixing Luxalon / Lennox
300C Aluminium; Unperforated false
ceiling system consisting of 300 mm wide
panels pre-roll formed from 0.7mm thick
enamelled aluminum strip. The 29mm
high upstands at the ends to give
enhanced rigidity and a smart hairline joint
in staggered pattern. All panels to feature
5mm bevelled edges length-wise to form
visually closed V-groove joints. Panels
shall be manufactured from prepainted,
stone enamelled, alloy EN-AW-3005
accordingly to EN 1396 and ECCA. Rows
of 0.95 Aluminium. Roll formed carriers
shall be installed at 300 mm from the
panel edge and 1250 mm centre to centre
thereafter. Carrier span shall be at a
distance of 1500mm to 2000mm centre to
centre by
means of rigid suspension system.
Luxalon carrier shall be with integrated
locking clips to prevent the dislocation of
the panels. All materials shall be installed
in strict compliance with local codes,
ordinances
and
manufacturers
recommendations
including
specific
additional requirements as may be called
for in the specifications or shown on the
drawings.
sqm
YAMUNA SPORTS COMPLEX
1837.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
8.6 Providing and fixing Luxalon / Lennox aluminum 30Bd
unperforated false ceiling system consisting of 30mm wide x
15mm deep made out of 0.5mm thick prepainted enamelled
unperforated aluminum strip. The coating will consist of a
tough and durable 2 layer polyester finish in nominal
thickness of 20 microns, applied in a continuous coil
coating process. Panels shall be clipped to a baked
enamelled aluminum carrier 62mm wide made out of 0.95mm
thick aluminum. There shall be an open gap of 20mm
between the panels. Carrier shall be suspended by means of
rod hanger and clips at distance
of 300 mm from edge and 1700mm centre to centre. Panel
span shall be 150mm from the edge and 1850mm
centre to centre. All materials shall be installed in strict
compliance with local codes, ordinances and manufacturers
recommendations
including
specific
additional
requirements as may be called for in the specifications or
shown on the drawings.
sqm
807.00
sqm
4480.00
8.7 10 cm thick (average) mud phaska of
damped brick earth on roofs laid to slope
consolidated and plastered with 25 mm
thick mud mortar mixed with bhusa at 35
kg per cum of earth and gobri leaping with
mix 1:1 (1 clay : 1 cow dung) and covered
with flat tile bricks of class designation 100
grouted with cement mortar 1:3 (1
cement : 3 fine sand) mixed with 2% of
integral water proofing compound by
weight of cement and
finished neat :
With F.P.S. brick tiles
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
8.8 Providing gola 75x75 mm in cement
concrete 1:2:4 (1 cement : 2 coarse sand :
4 stone aggregate 10mm and down
gauge) including finishing with cement
mortar 1:3 (1 cement : 3 fine sand) as per
standard design :
metre
In 75x75mm deep chase
Quantity
Rate in fig. and
in Words (INR) Amount in INR
750.00
8.9 Providing and fixing Luxalon / Lennox 180 B aluminum
unperforated false ceiling system. Panel shall be 130mm
wide x 15mm deep made out of 0.6mm thick prepainted
enamelled aluminum strip. Panels shall be clipped to
Luxalon Aluminum carrier made from 0.95 mm thick
enamelled aluminum in a module of 50mm with the prongs to
hold the panels. Carriers shall be joined by means of special
carrier splices to provide a visible fatal appearance.
Carrier shall be suspended by means of 4mm dia rod hanger
by using a suspension clip to provide the correct level.
Panel span shall be 150mm from the edge and 1450 mm centre
to centre. Carrier span shall be 300mm from the edge and
1700mm centre to centre. All accessories shall be provided
as per manufacturers catalogues & as per directions of
Engineer-in-charge. Between the panels there shall be an
open gap of 20mm, which can be filled with a recessed Vshaped profile.
sqm
YAMUNA SPORTS COMPLEX
427.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
8.10 Providing and fixing 0.45mm precoated
galvanized
steel
sheet
roofing
accessories with minimum 550Mpa yield
strength , metallic hot dip coated with
zinc / aluminium alloy ( 55% aluminium,
45% zinc) as per AS 1397. Zincalume AZ
150 ( minimum 150 gm per sqm total on
both sides with colour bond steel quality
paint coat as per AS/ NZS 2728 class 3 of
bluescope steel make. the paint shall have
a total coating thickness of 35 micron,
comprising of 20 micron on exterior coat
on top surface and 5 micron on reverse
coat on back surface over 5micron primer
coat on both surface of approved colour
and shall be fastened with min 40 micron
zinc coated/ minimum 25 micron zinc tin
alloy coated hexheaded,self drilling screws
/seam nuts as per AS 3566-2002 class 3
fasteners of approved make( Buildex or
equivalent)all complete as per the
direction of Engineer-In-Charge
Square
metre
155.00
8.11 Providing and fixing of Double skin LYSAGHT
Insulated roofing system with top sheet is LYSAGHT
KLIP-LOK concealed system profile sheeting with
nominal 700 mm effective cover width, nominal 43 mm crest
depth at pitch of nominal 233 mm centre to centre distance
along with stiffeners perpendicular to ribs for strength. The
bottom sheet is LYSAGHT TRIMDEK profile
sheet of nominal 1015 mm effective cover width and nominal
28 mm deep ribs with subtle square fluting in the five pan at
nominal 203 mm centre-to-
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
centre. The feed material for top and bottom sheet is
manufactured out of 0.45 mm Base Metal Thickness
(BMT), Hi-Tensile steel with min. 550 MPa yield
strength, metallic hot dip coated with Zinc/Aluminium
alloy (55% Aluminium, 45% Zinc) as per AS 1397 Zincalume AZ150 (min. 150 gms/sq.mt total on both
sides) with Colorbond steel quality paint coat as per AS/
NZS 2728 Class 3 of BlueScope Steel make. The paint
shall have a total coating thickness of nominal 35μm,
comprising of nominal 20μm exterior coat on top surface
and nominal
5μm reverse coat on back surface over nominal 5μm primer
coat on both surfaces of approved colour shade for the top
sheet by the concern authority. The top profile sheet shall be
rolled over specially designed concealed fixing clip KL70, manufactured from hi-tensile Zinc/Aluminium alloy
Zincalume steel base and galvanized hooks as per
manufacturers recommendation and approved by concern
authority. The clip KL-70 shall be fastened with min.
40μm Zinc coated/min. 25μm Zinc-Tin alloy coated,
Hex head, self-drilling screw as per AS 3566-2002 Class
3 fasteners of approved make (Buildex or equivalent). The
two sheets shall sandwich a layer 100 mm thick Glass-wool
24 Kg/m3 insulation with aluminium
foil. All the accessories like gutter /
flashing / capping shall be made from the
G550 or G330 in approved colour shade
as per manufacturers’ recommendation.
The entire Double skin system is installed
over
the
structure
purlin.
The
measurement shall be based on
finished/covered
surface
area.
All
complete as per direction of Engineer-incharge.
sqm
YAMUNA SPORTS COMPLEX
1880.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
9.0 walls & surface finishes
9.1 12 mm cement plaster of mix :
a 1:4 (1 cement: 4 fine sand)
sqm
14310.00
9.2 15 mm cement plaster on the rough side
of single or half brick wall of mix :
sqm
a 1:4 (1 cement: 4 fine sand)
6393.00
9.3 6 mm cement plaster of mix :
a 1:3 (1 cement: 3 fine sand)
sqm
13770.00
9.4 6 mm cement plaster 1:3 (1 cement: 3 fine
sand) finished with a floating coat of neat
cement and thick coat of Lime wash on
top of walls when dry for bearing of R.C.C.
slabs and beams.
sqm
473.00
9.5 Providing and fixing 24 guage and 18mm
size chicken wire mesh at junction of
concrete and brick work and other location
including cutting to required size and side
laps of minimum 75mm and fixing in
position with nails, clips as directed.
sqm
517.00
sqm
27748.00
sqm
27748.00
9.6 Providing & applying Two or more coats of
ULTRASATEN, or equivalent or better make
acrylic enamel for walls, that comes in a gloss, or satin
finish on prepared underbase as per sample approved by the
Engineer-in-charge. Material Should conform to the
norm DIN 53 778.
9.7 Providing and applying plaster of paris putty of 2 mm
thickness over plastered surface to prepare the surface even
and smooth complete
9.8 Add or deduct for plaster drip course/ groove in plastered
surface or moulding to R.C.C. projections.
YAMUNA SPORTS COMPLEX
metre
730.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
9.9 Supplying and applying Matrix Coolaid /
regalis or better or equivalent, silicate
based mineral paint fortified with silane
modified elastomeric latex medium with
400% elongation in approved shade and
finish. The paint shall be fully inorganic
with alkaline-resistant inorganic pigments .
The salient features of paint will be inhibit
micro biotic growth, acid rain resistance,
reduce carbonization of cementitious
materials, anti-fungal, dust proofing, antiefflorescence, crack bridging and thermal
insulation upto 60C. The application
procedure shall comprise of 2 coat of
matching colour primer and 2 coats of
Paint as per specifications and directions
of Engineer-in-charge.
sqm
7042.00
sqm
1807.00
9.11. Applying one coat of cement primer of
approved brand and manufacture on wall
surface :
sqm
Cement primer.
1807.00
9.10 Distempering with 1st quality acrylic
washable distemper (ready mixed) of
approved manufacturer and of required
shade and colour complete.as per
manufacturer's specification.
Two or more coats on new work.
9.12. Painting with synthetic enamel paint of
approved brand and manufacture of
required colour to give an even shade:
Two or more coats on new work over an
under coat of suitable shade with ordinary
paint of approved brand and manufacture.
sqm
3181.00
sqm
977.00
9.13. Finishing with Epoxy paint (two or more coats)
at all locations prepared and applied as per
manufacturer's specifications including
appropriate priming coat, preparation of
surface, etc. complete, as per direction of
Engineer-in-charge.
On steel work / Wood Work
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
9.14 20 mm cement plaster of mix :
1:4 (1 cement: 4 fine sand)
Unit
Quantity
Sqm
180.00
9.15 12 mm cement plaster 1:3 (1 cement: 3
coarse sand) finished with a floating coat
sqm
of neat cement.
12.00
Rate in fig. and
in Words (INR) Amount in INR
9.16 Painting with black anti-corrosive bitumastic
paint of approved brand and manufacture to
give an even shade:
Two or more coats on new work.
sqm
25.00
10.0 Fire & Sound Proofing
10.1 77MM THICK ACOUSTIC CUM
FIRE / SMOKE CHECK DOOR OF
120 MINUTES FIRE RATING
a DOOR FRAME: Supply and fixing of Wooden
Door Frame of section 145mm x 70mm with heat activated
intumescent fire seal strip of size 10mm x 4mm
(Astroflame U.K.) and one coat of anti-termite fire
retardant Primer.
b DOOR SHUTTER : Supply and fixing of double
leaf shutter of 77mm thick having 38 dB acoustic cum fire
door of 120 min. fire rating having infill of 47mm thick resin
bonded glasswool of 24kg / M3 density with FR Acrylic
Sealant sandwiched between two 9mm thick Starpan
Calcium Silicate boards 100% without asbestos, Brucite
and Meerschaum having a density not less than 1150kg/
M3 and thermal conductivity 0.14 W/m*k(watt per meter
per kelving) faced with 6mm thick teak Maple/Beach ply
with heat activated intumescent fire seal strip of size 10mm
x 4mm mounted in the grooves having teakwood lipping and
Raven RP 38 as automatic door bottom seal with RP 16
as astragal seal. The doors shall be of Sukhri Navoir
Godrej or equivalent or better make as per manufacture
specification and direction of Engineer-in-charge.
c RAVEN ACCOUSTIC SEALS
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
ci RP 24 – An adjustable door stop seal for frame for noise,
light and smoke. The RP 24 seal uses independently
adjustable fastners to achieve upto 8mm sealing adjustment
for maximum noise control.
cii RP 16 – An astragal seal for use with plain or rebated
meeting stiles on double doors.
ciii RP 38 – RP 38 is a heavy duty self levelling automatic
door bottom seal which is spring loaded to lift clear of the
floor as soon as the door leaf is opened by a few millimeters.
The seal is operated automatically by pressure against the
door jamb on the adjusting screw. It seals when the door
closes and retracts automatically when door is opened.
sqm
31.00
each
19.00
10.2 Supplying and fixing ingersoll rand briton or equivalent
or better make 2 hrs fire rated 121 series door closer with 10
yrs warranty tested to BS-476 Part 22 all complete as per
directions of Engineer-in-charge.
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
11.0 Stainless Steel work
11.1
Providing and fixing in position stainless
steel Hand Rail system (Aravalli Craft,
Cannon or equivalent) including mid rails
welded built-up section using pipes and
connecting plates of stainless steel grade
304 polished to satin finish, of required
diameter and thickness including cutting,
welding, grinding, bending to required
profile and shape, hoisting, buffing,
polishing, cutting chases/embedding in
RCC/masonry, fixing with stainless steel
(grade 304) screws, nuts, bolts rossette
covers and washers or stainless steel
fasteners to make it rigidly fixed and stable
against impact force with necessary bends
and terminations having in fill of 12 mm
thick toughened glass or 2 mm thick
perforated sheet AISI202 grade etc. and
making good the walls / plaster etc. all
complete generally as per drawings and
satisfaction of Engineer-in-Charge.
a The item includes epoxy grouts welding
etc. which shall not be measured for
purpose of payment and for weight of
stainless steel pipes for blusters and mid
rails , stainless steel plates rossette cover,
nut and bolts etc as actually provided shall
only be mesured in Kg.) [ The in fill panels
of toughened glass or perforated steel
sheet shall be measured and paid for
separately in respective items].
kg
11.2 Providing and fixing pull handle Model No.
SH18PSS Dorset Make, superior to or
equivalent with necessary screws etc., all
complete as approved by the Engineer-In- each
Charge.
pair
YAMUNA SPORTS COMPLEX
3077.00
50.00
TENDER
S.No. Description of Item
11.3 Providing and fixing bright / matt finished
stainless steel floor mounted door stopper
of Dorma Make
or superior to or
equivalent with necessary screws etc., all
complete as approved by the Engineer-InCharge.
Unit
Quantity
each
266.00
metre
284.00
Make: Jindal Architecture Ltd. or
equivalent or better, as per the sample
approved by the Engineer-in-charge.
metre
103.00
Rate in fig. and
in Words (INR) Amount in INR
11.4 Fabrication, supply & installation of
stainless steel top Mounted Railing (DType) (Conforming to 304 Grade), at a c/c
distance of 900mm, consisiting of handrail
50mm diax2 mm thick, neck pipes 19mm
dia, 2mm thick, 3 nos midrails 19mm dia,
1.6mm thick pierced through balusters,
base plates 6mm thick as per drawing /
details.
Make: Jindal Architecture Ltd. or
equivalent or better.as per the sample
approved by the Engineer-in-charge.
11.5 Fabrication & supply and installation of
stainless steel side mounted railing (DType) conforming to J-4 grade at a centre
to centre distance of 900 mm consisting of
hand rail 50 mm dia, 1.6 mm thick
balusters 50mm dia x 2 mm thick, neck
pipes 19mm dia x 2 mm thick, 3 Nos mid
rails 19mm dia 1.6 mm thick pierced
through balusters, base plates 6 mm thick
as per drawing / details.
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
12.0 Fitments of toilets and change rooms
12.1 Providing and fixing 5.5mm thick mirror
of Superior quality fixed to 6mm thick
waterproof and termite resistant backing
with 3M micron tape complete as
approved by Engineer-in-Charge , Make
Modi Float or equivalent.
sqm
135.60
each
24.00
12.3 Providing and fixing
automatic soap
dispenser
(Code
No.:0741008)
manufactured by M/s Pudumjee health
products or equivalent or better make,
complete as per directions of Engineer-incharge
each
69.00
12.2 Providing and fixing stainless steel Green
Line recessed Hand towel dispenser
(Code No.:- 0741020 / 21) manufactured
by M/s Pudumjee health products or
equivalent or better make complete as per
directions of Engineer-in-charge
12.4 Providing and fixing in position "BESCO"
support grab bar system made of
seamless polymide 6 grade nylon versatile
tube 32mm dia x 3mm thick reinforced
with anticorrosive aluminum rod 30mm x
3.2 mm with concealed wall fixing of
80mm dia rose made of anticorrosive
steel, polymide disc and polymide Cap
with plugs and screws complete as per
instruction of Engineer-in-charge.
a L safety support, Art. 822
each
9.00
b Intermidiate wall support, Art. 823/BL.
each
9.00
c Vertical safety Art. 840.
each
9.00
each
9.00
each
9.00
d Horizontal safety, Art. 840/A /
(650)mm
e Basin guard rail, Art 840/L.
YAMUNA SPORTS COMPLEX
570
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
12.5 Providing and fixing urinal partition of
1200x500 mm of required shape and
colour shade of Besco make consisting of
18 mm thick compact laminates, fixed 600
mm above the floor level with required
stainless steel accessories and SS 304
screws and plugs etc complete, as per the
directions of Engineer-in-charge.
each
36.00
12.6 Providing, fabricating and erecting in
position 100% water, chemical, moisture,&
impact resistant, floor anchored, (as per IS
: 2046) Bath, shower, W.C. enclosure /
cubicle (modules) of make merino-Titan
Standard series or equivalent, made of
compact laminates, consisting of 12 mm
thick intermediate panel and / or 18mm
thick pilasters and doors panels, treated
with phenolic treated craft paper on both
sides & edges of panel, decorative paper
of approved design (as approved by
engineer-in-charge), and finally with a
protective / impermeable top layer coated
with melamine resin of high concentration.
(The board should pass BS 476 class I
test for fire; the xenon arc wool grade 6;
cigarette
burn
test
as
per
ISI
Specifications;
and also the board should be joint free in
widths up to 1550mm). All pilasters and
doors shall be 18 mm thick and
intermediate panels shall be 12 mm thick
solid compact laminates with edges
chamfered, the solid compact laminate
(phenolic
core
board)
shall
be
impregnated with phenolic resin based on
thermosetting resins,
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
homogeniously reinforced with cellulose
fibres and laminates on both sides with
sued finish melamine, performance of the
panel
board
shall
possess
the
characterstics of colour, scratch & impact
resistance and shall include cost of
providing and fixing of doors with extruded
aluminium channels,Bottom Cladding,UChannels, aluminium L-angle, stainless
steel plate SS-304, SS box plate SS304,
latch lock & occupancy indicator, SS solid
door knob SS304 30 mm dia, 4 Nos, SS
304 coat hooks 22mm dia, SS304 box up
shoe, SS304, hinge and cover, rubber
strips for grooves, necessary SS304 grade
screws, complete to the full satisfaction of
Engineer-in-charge.
each
172.00
12.7 Providing, fabricating and erecting in
position 100% water, chemical, moisture,&
impact resistant, side hung, (as per IS :
2046) lockers of make merino or
equivalent, made of compact laminates,
treated with phenolic treated craft paper
on both sides & edges of panel, decorative
paper of approved design (as approved by
engineer-in-charge), and finally with a
protective / impermeable top layer coated
with melamine resin of high concentration.
(The board should pass BS 476 class I
test for fire; the xenon arc wool grade
6;cigarette burn test as
per ISI specifications; and also the board
should be joint free in widths up to
1550mm). All pilasters and doors shall be
18 mm thick and intermediate panels shall
be 12 mm thick solid compact laminates
with edges chamfered, the solid compact
laminate (phenolic core board) shall be
impregnated with phenolic resin based on
thermosetting resins,
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
homogeniously reinforced with cellulose
fibres and laminates on both sides with
sued finish melamine, performance of the
panel
board
shall
possess
the
characterstics of colour, scratch & impact
resistance and shall include cost of
providing and fixing of doors, locks,
hinges, louvers all complete as detailed
below
A2 Locker System, Z-type model, size of per locker as
915x320x450mm, 3mm thick sides and back partion walls;
9mm thick top, bottom and shelves, Depth of locker unit as
450mm, over all height of locker unit as 915mm having
necessary accessories as; Cam/Pad locks, SS Hinges,
Aluminium interlocking supporting frame work, rubber
door stopper lining, screws and wall plugs etc., all complete
as per directions of Engineer-in-charge.
each
column
of two
lockers
158.00
12.8 Supply and Fixing Floor mounted fixed,
four seater SS Bench confirming to grade
304, Satin finish size 1742 x 400 x 435
mm comprising of 50mm dia. 2 mm thick
S.S. Pipes with perforated sheets and
back rest 1742 x 251 mm made of 1.6mm
thick., S.S. Sheet (RB5B) as approved by
the Engineer-in -Charge.
Make - Jindal Architecture. or equivalent
or better.
each
YAMUNA SPORTS COMPLEX
28.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
13.0 Aluminium Work
13.1 Providing and fixing aluminium work for
doors, windows, ventilators and partitions
with extruded built up standard tubular
sections/ appropriate Z sections and other
sections of approved make conforming to
IS: 733 and IS : 1285, fixed with rawl plugs
and screws or with fixing clips, or with
expansion hold fasteners including
necessary filling up of gaps at junctions, at
top, bottom and sides with required
VC/neoprene felt etc. Aluminium sections
shall be smooth, rust free, straight, mitred
and jointed mechanically wherever
required including cleat angle, Aluminium
snap beading for glazing / paneling,C.P.
brass / stainless steel screws, all complete
as per architectural drawings and the
directions of Engineer-in-charge. (Glazing
and paneling to be paid for separately) :
a For fixed portion
ai Anodised
aluminium
(anodised
transparent or dyed to required shade
according to IS: 1868, Minimum anodic
coating of grade AC 15)
kg
b For shutters of doors, windows &
ventilators including providing and fixing
hinges/ pivots and making provision for
fixing of fittings wherever required
including the cost of PVC / neoprene
gasket required (Fittings shall be paid for
separately).
bi Anodised
aluminium
(anodised
transparent or dyed to required shade
according to IS: 1868, Minimum anodic
coating of grade AC 15) aluminium
(minimum thickness of polyester powder
coating 50 micron)
YAMUNA SPORTS COMPLEX
kg
5514.00
949.73
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
14.0 Miscellaneous
14.1 Providing and fixing in position Arena Stadia Seating
with seat and back upholstered, of make albany, camatic,
sebel or equivalent or better, as specified in specifications,
in the required curved / straight aisle, Floor mounted / wall
mounted as per the layout plan including drilling holes etc.,
and fittings, all complete as per directions of Engineer-incharge.
14.2
Each
560.00
Extra Rates for Providing and fixing of Additional
armrest with cup holder in arena seating as directed by the
Engineer in charge.
Each
700.00
14.3 Providing and fixing in position Arena Stadia Seating
of make albany, camatic, sebel or equivalent or better, as
specified in specifications, in the required curved / straight
aisle, Floor mounted / wall mounted as per the layout plan
including drilling holes etc., and fittings, all complete as
per directions of Engineer-in-charge.
Each
2270.00
14.4 Providing and laying water proofing treatment
to vertical and horizontal surfaces of
depressed portions of W.C., kitchen and the
like consisting of :
i) Ist course of applying cement slurry @ 4.4
Kg/sqm mixed with water proofing compound
conforming to IS 2645 in recommended
proportions including rounding off junction of
vertical and horizontal surface.
ii) IInd course of 20mm cement plaster 1:3
(1 cement : 3 coarse sand) mixed with water
proofing
compound
in
recommended
proportion including rounding off junction of
vertical and horizontal surface.
iii) IIIrd course of applying blown or residual
bitumen applied hot at 1.7 Kg. per sqm of
area.
iv) IVth course of 400 micron thick PVC
sheet. (Overlaps at joints of PVC sheet should
be 100 mm wide and pasted to each other
sqm
with bitumen @ 1.7 Kg/sqm.)
YAMUNA SPORTS COMPLEX
1296.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
14.5 Providing and laying construction joint by
making a saw cut grove of 6mmx6mm
vertically or horizontally in form of "V"
shape, priming surface with ardex WPM
256 or equivalent at least 150mm (75mm
of each side of the grove), filling the grove
with cement admixed with ardex WPM
256, or equivalent, applying one coat of
ardex WPM 002 on the primed surfaces,
while the coating remains wet and fluid,
placing ardex deck web on to the wet
material and throughly wetting it out by
rolling with flutted aluminium fibre glassing
roller, applying liverly second final coat of
ardex WPM 002 immedaitely on top of the
tape etc. complete as per manufactures
specifications and direction of engineer-incharge.
metre
375.00
14.6 Providing and treating all the pipes and
fittings and electrical fittings carefully with
ardex WPM 256 mixed with cement and
sand (1 part of WPM 256 with 1part of
cement and 3 parts of fine sand) as per
manufactures specifications and direction
of engineer-in-charge
each
50.00
14.7 Providing and applying a binder coat and
protection plaster with ardex WPM 405
mixed with water and cement ( 1part of
ardex WPM with 1 part of water and 4 part
of cement) to a thin slurry and separating
the mix over the surface with brass
(thickness not more than 2mm) and
providing and applying 12 to 15mm
cement mortar 1:3 (1cement : 3 fine sand)
over the wet binder coat with a wooden
floor trowel, etc complete as per
manufactures specifications and direction
of engineer-in-charge.
(Rupees
two and paise fifty only)
sqm Two hundred seventy
2692.00
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
14.8 Demolition and removal of part of existing
structure (duly shown in relevant
drawings) required to be demolished for
new structure including removal of
servicable/unservicable material for all
leads andf lifts from periphery of the area,
as per directions of Engineer-in-charge.
The contractor shall thoroughly inspect the
site of work before quoting the rates and
has to assess the existing construction
required to be demolished. The demolition
work has to be carried out in strict
supervision of the contractor to ensure
that no other structural member beyond
the scope of demolition / dismantelling is
disturbed / damaged;
however it should be explicitly understood
by the contractor, that if any work beyond
the scope of demolition is disturbed by the
contractors men, the same has to be
made good by the contractor at his own
cost. The contractor shall also take proper
safety measures while undertaking the
demolition / dismanteling works, to avoid
any sort of accidents and damage to the
nearby structures. No payment on account
of demolition, disposal etc., shall be paid
by the DDA (Rates quoted shall be the
amount payable by the contractor to
Department and it will be presume that the
contractor has thoroughly seen /
understood the existing structure to be
demolished, before quoting his rates)
The work of refurbishment shall be taken
up after demolition of the relevant
structures as shown in the Drawings and
as per direction of Engineer-in-charge.
YAMUNA SPORTS COMPLEX
each job
1.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
14.9 Demolition and removal of part of existing
structure (duly shown in relevant
drawings) including steel truss required to
be demolished for new structure including
removal
of
servicable/unservicable
material for all leads andf lifts from
periphery of the area, as per directions of
Engineer-in-charge. The contractor shall
thoroughly inspect the site of work before
quoting the rates and has to assess the
existing construction required to be
demolished. The demolition work has to
be carried out in strict supervision of the
contractor to ensure that no other
structural member beyond the scope of
demolition / dismantelling is disturbed /
damaged;
however it should be explicitly understood
by the contractor, that if any work beyond
the scope of demolition is disturbed by the
contractors men, the same has to be
made good by the contractor at his own
cost. The contractor shall also take proper
safety measures while undertaking the
demolition / dismanteling works, to avoid
any sort of accidents and damage to the
nearby structures. No payment on account
of demolition, disposal etc., shall be paid
by the DDA (Rates quoted shall be the
amount payable by the contractor to
Department and it will be presume that the
contractor has thoroughly seen /
understood the existing structure to be
demolished, before quoting his rates)
The work of refurbishment shall be taken
up after demolition of the relevant
structures as shown in the Drawings and
as per direction of Engineer-in-charge.
YAMUNA SPORTS COMPLEX
Each Job
1.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
15.0 Glazing & External Facad
15.1 Providing, fabricating and fixing in position
exterior
grade
LENNOX/
REYNO
BOND/ALPOLIC make, superior or
equivalent
3mm
thick
perforated
aluminium composite panel cladding for all
heights including fixing over framing of
M.S.
angle
50x50x6mm
of
size
3600x1200mm with bracket etc. duly hot
dipped galvanized stiffeners for fixing in
brick wall, R.C.C wall, columns and like.
Aluminium frame shall be fixed on this
frame after making shape of tray as per
required panel size providing equal gap
all round. The panels to be filled with
dowcorning
sealant
as
per
drawing/directions of Engineer-in-Charge.
Panel to be fixed over aluminium frame
made of (50x25mmX1.6mm) cleats etc.
Aluminum cladding with 70% KYNAR 500
PVDF(3 coats + 2 Bake) coating on
exposed surface with 3003 H16 or 5005
H16 aluminium alloy sheet 0.21 mm thick
skin sheet on both side with LDPE anti
toxic core material having density 0.92
gm/Cubic Cm, sandwiched between
aluminium sheet making overall thickness
of composite sheet as 3mm.
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
This composite sheet with CNC predrilled/
punched perforations as per shapes, sizes
and
pattern
provided
by
the
architect/Engineer-in-Charge of approved
shade colour and size. All supporting
structure to be designed to satisfy the
existing loading conditions. Rates are
inclusive of the entire frame work and
aluminum cladding etc. all labour,
scaffolding, sundries etc. complete
including achieving flatness of surface
without
undulation. The agency shall
provide Bank Guarantee for 10 (Ten)
years towards its wear and tear in all
respect as per directionss of Engineer-inCharge.
Sqm
2955.00
15.2
Providing, fabricating and installation of Metal framed Suspended ceiling comprises of 4 mm thick Aluminium composite panel with mineral filled core Lennox/ Reynobond/Alpolic or equivalent make and frame of G.I perimeter channel having 0.55mm thickness, two unequal flanges of 20 and 30mm and web of 27mm is fixed to surrounding walls / partition using nylon sleeves and screws at 450mm centers. Then Intermediate Channel (0.91mm thick) having two equal flanges of 15 mm. each and a web of 45mm is suspended from the soffit at 1220mm center with ceiling angle of width 25mm x 10mm x 0.55mm thick, fixed to soffit with G.I cleat (size 25mm wide with two unequal legs of 27 mm & 35mm with 1.8mm thick) and steel expansion fasteners (12mm dia. & 38mm long expandable aluminium alloy fastener). YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Ceiling section of 0.55mm thickness having knurled web of 50.5 mm and flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with connecting clips (2.64mm dia. Spring steel wire to hold the ceiling section & intermediate channel to form a regular frame) across to the Intermediate channel, at 457mm centers. The composite Aluminium panels are screw fixed along/across the ceiling sections with 25 mm long self drilling & tapping screws having Phillips head with under head cutter, at 200mm centers through the board the joints of the face boards are finished with specially formulated jointing compound and 48mm wide fiber tape to provide seamless finish. Accoustic/fire sealent shall be filled in the junctions sof the floors, ceilings, door openings & windows openings to create a barrier for leakage of sound as well as fire.
G.I. perimeter channel and supporting materials are to be provided to make any opening for light fittings, diffusers etc. and should be supported properly to maintain the integrity of the ceiling complete to the sqm
satisfaction of Engineer-in-charge.
Quantity
Rate in fig. and
in Words (INR) Amount in INR
300.00
15.3 Supplying, Fabrication and fixing in position pressed Aluminium louvers comprising of outer frame work made out of pressed channel of size suitable for the span of the structure in Anodised finish with inverted Z type louver blades (of Bhoruka Aluminium or equivalent or better Z-sections) fixed to the frame work with mechanical means, and PVC bird mesh on inside to prevent entry of birds etc. as per instructions and satisfaction of Engineer-in-charge.
Sqm
YAMUNA SPORTS COMPLEX
13.00
TENDER
S.No. Description of Item
16.0 Plumbing & sanitary services
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
16.1 Providing and fixing white glazed vitreous china double trap syphonic pattern having back inlet, supporting on Geberit duofix wall fastening set (111.815.00.1) / Angel Parryware concealed (C8136) for wall hung type (European type) water closet, providing and fixing soft close seat cover with CP brass hinges and rubber buffers, adapter, rubber joints fixed to WC. CP brass screwed washers including cutting and making good the walls and floors wherever required, as per sample approved by Engineer-in-charge.
Giralda wall hung W.C. Of Roca make or Cardif walvit panset parryware Cat no. C0264 or ARMADA Wall hung of Hindware Cat no.92036 with duofix mounting element Cat no.111.100.00.1, Concealed cistern Dual Flush cat no. 115.745.00.1 and stainless steel actuator plate (high line) Cat no. 115.151.00.1
Each
109.00
Range of single urinal basin with Integrated EFS of Roca make, or equivalent or bettermake as per the sample Each
approved by Engineer-in-charge. 47.00
16.2 Providing and fixing Urinals of Parryware Roca model Integrated EFS DC (Code C 8098)/EFS AC with Power source as decided by Engineer-in-charge, or equivalent or better makes of Hindware / Cera, Integrated EFS DC, CP Brass syphon ( for waste water), complete including cutting and making good the walls and floors wherever required.
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
16.3 Providing and fixing ultra Alpine white glazed vitreous china wash basin circular or oval or Rectangular shape below counter, with rubber plug 32 mm CP brass waste of Jaquar Cat no.ALD-709, 32 mm dia CP Brass bottle trap/P trap Jaquar Cat no.ALD-769 and union 32 mm dia CP pipes to wall flange complete including cutting and making good walls wherever required, as per sample approved by Engineer-in-charge. Roca make or duro plus of duravit make belowcounter wash basin or any other equivalent or better make, including Sensotranic sensor faucet Jaquar Cat no. Each
SNR 51021.
Quantity
Rate in fig. and
in Words (INR) Amount in INR
135.00
16.4 Providing and fixing in position C.P.Angle Valve of
Arco make with Copper Connecting pipe with wall
flanges, complete as per standared including cutting and
making good the walls wherever require. (Angle Valve Arco Make or equivalent or better make as per sample
approved by Engineer-in-charge)
Each
271.00
16.5 Providing and fixing Wall Mixer divertor with provision
of shower head of Jaquar/crabtree/grohe make or better or
equivalent make complete as per standared design including
cutting
and making good the walls wherever require, as per sample
approved by Engineer-in-charge, (Divertor - Jaquar
Kubix Single lever range -Art.no. KUB - 35143)
(Over head Shower Single lever - Cat No.CON-493)
or equivalent or better make.
Each
YAMUNA SPORTS COMPLEX
62.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
16.6 Providing and fixing Toilet paper dispenser complete
including cutting and making good the walls and floors
wherever required.(Pudumjee Hygiene - Art.no.
Greenlime 0741024WH) or equivalent or better as per the
sample approved by the Engineer-in-charge.
Each
109.00
Each
109.00
metre
1340.00
16.7 Providing & fixing C.P. brass Bib cock of Jaquar make
complete as per standared including cutting and making
good the walls wherever require. (Bib Cock - Jaquar Cat.no. 037) or equivalent or better as per the sample
approved by the Engineer-in-charge
16.8 Providing and fixing centrifugally cast (spun) iron S&S
Soil,Waste and Vent pipes including all fittings/
accessories such as bends, junctions, heel rest sanitary
bends, terminal guards,collars, holder bat clamps,floor trap,
cleanout plugs,lead caulked joints and any other fitting
required as per EIC, complete in all respect:
100 mm dia
16.9 Providing and fixing Polyethelene-AluminiumPolyethelene (PE-AL-PE) Composite Pressure
Pipes confirming to IS 15450 U.V.stablised with carbon
black having thermal stability for hot and
cold water supply, capable to withstand temperature upto
80° C including all special fittings of composite material
( engineering
plastic blend and brass inserts wherever required) e.g
elbows,tees, reducers, couplers and connectors etc with
clamps at one metre spacing. This includes the cost of
cutting chases testing of joints complete as per direction of
Engineer in charge.
Concealed work including cutting chases and making good
the walls etc., complete.
a) 1216 (16 mm OD) pipe
Metre
YAMUNA SPORTS COMPLEX
980.00
TENDER
S.No. Description of Item
Unit
Quantity
b) 1620 (20 mm OD) pipe
Metre
790.00
c) 2025 (25 mm OD) pipe
Metre
538.00
d) 2532 (32 mm OD) pipe
Metre
568.00
e) 3240 (40 mm OD) pipe
Metre
237.00
f) 4050 (50 mm OD) pipe
Metre
145.00
External work
a) 3240 (40 mm OD) pipe
Metre
551.00
b) 4050 (50 mm OD) pipe
Metre
192.00
Each
89.00
a) 3240 (32 mm OD) pipe
Each
67.00
b) 4050 (50 mm OD) pipe
Each
22.00
Rate in fig. and
in Words (INR) Amount in INR
16.10 Providing
and fixing Polyethelene-AluminiumPolyethelene (PE-AL-PE) Composite Pressure
Pipes confirming to IS 15450 U.V.stablised with carbon
black having thermal stability for hot and
cold water supply, capable to withstand temperature upto
80° C including all special fittings of composite
material( engineering
plastic blend and brass inserts wherever required) e.g
elbows,tees, reducers, couplers and connectors etc with
trenching,refilling and testing of joints complete as per
direction of Engineer-in-charge
16.11 Making connection of G.I. distribution branch with
G.I. main of following sizes by providing and fixing tee,
including cutting and threading the pipe etc. complete.
a) 25 to 50 mm nominal bore
16.12 Providing and fixing gun metal gate valve with C.I. wheel
of approved quality. (screwed end).
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
16.13 Providing and fixing gun metal non-return valve of
approved quality (screwed end).
a) 3240 (32 mm OD) pipe
Each
67.00
b) 4050 (50 mm OD) pipe
Each
22.00
a) 100 mm diametre
Metre
450.00
b) 150 mm diametre
Metre
172.00
a) 100 mm diametre S.W. Pipe
Metre
450.00
b) 150 mm diametre S.W. Pipe
Metre
172.00
c) 250 mm diametrer Pipe
Metre
162.00
d) 300 mm diametre Pipe
Metre
238.00
Each
39.00
17.0 External Services
17.1 Providing , laying and jointing glazed stoneware pipes
grade ‘A’with stiff mixture of cement in the proportion of
1:1 (1 cement : 1fine sand) including testing of joints etc.
complete.
17.2 Providing and laying cement concrete 1:5:10 (1 cement: 5
coarse sand : 10 graded stone aggregate 40 mm nominal size)
alround S.W./ R.C.C. pipes including bed concrete as
per
standard design.
17.3 Providing & fixing square - mouth S.W. gully trap grade
'A' complete with C.I grating brick masonry chamber with
water tight C.I. Cover with frame of 300 x 300mm size
( inside ) the weight of cover to be not less than 4.50kg &
frame to be not less than 2.70 kg as per standard design.
a) 100 x 100 mm size P type with bricks of class designation
75
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
17.4 Constructing brick masonry manhole in cement mortar 1:4
(1cement : 4 coarse sand) R.C.C. top slab with 1:2:4 mix
(1cement : 2 coarse sand :4 graded stone aggregate 20 mm
nominal size) foundation concrete 1:4:8 mix (1 cement : 4
coarse sand : 8 graded stone aggregate 40 mm nominal size)
inside plastering 12 mm thick with cement mortar 1:3 ( 1
cement : 3 coarse sand) finished with floating coat of neat
cement and making channels in cement concrete 1:2:4 ( 1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) finished with a floating coat of neat cement as
per standard design.
1 Inside size 90 x 80 cm and 45 cm deep including C.I.
cover with frame (light duty) 455 x 610 mm internal
dimensions total weight of over and frame to be not less than
38 kg (weight of cover 23 kg and weight of frame 15 kg).
a) With FPS bricks of class designation 75
Each
41.00
17.5 Constructing brick masonry circular type manhole 0.91m
internal dia at bottom and 0.56m dia at in cement mortar 1:4
(1 cement :
4 coarse sand) in side cement plaster 12mm thick with
cement moratr 1:3 (1 cement : 3 coarse sand)finishied with a
floating coat of neat cement, foundation concrete 1:3:6 mix
(1 cement :2 coarse sand : 6 graded stone aggregate 40 mm
nominal size) and making necessary channal, in cment
concrete 1:2:4 (1
cement :2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) finished with a floating coat of neat cement as
per
standard design.
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
1 0.91 m deep with S.F.R.S. cover and frame (heavy duty,
HD-20 grade designation ) 560 mm internal diameter
conforming to I.S. 12592,total weight of cover and frame to
be not less than 182 kg,, fixed in cement concrete 1:2:4 (1
cement : 2 coarse sand:4 graded stone aggregate 20mm
nominal size ) including
centering shuttering all complete. (Excavation, foot rests
and 12mm thick cement plaster at the external surface shall
be paid for separately )
a) With F.P.S. bricks class designation 75
Each
17.00
Each
17.00
a) 250 mm dia R.C.C. Pipe
Metre
182.00
b) 300 mm dia RCC pipe
Metre
248.00
17.6 Constructing brick masonry road gully chamber 50 x 45 x
60 cm with bricks of class designation 75 in cement mortar
1:5 (1 cement : 5 fine sand ) including 500 X 450 mm
precast R.C.C. horizontal grating with frame complete as
per standard
With F.P.S. bricks
17.7 Providing and laying non-pressure NP2 class (light
duty) R.C.C. pipes with collars jointed with stiff
mixture of cement mortar in the proportion of 1:2 (1 cement :
2 fine sand) including testing of joints etc. complete.
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
18 Pool Basin Equipments
Supply, installation, testing and commissioning
1 of Swimming Pool :
MAIN DRAIN Frame and Grille 350mm
x450mm Frame and grille in Stainless Steel
with grille fixing screws.Make: Abyss, Astral or
equivalent or better as per sample approved
Each
by Engineer-in-charge
6.00
Supply, installation, testing and commissioning
2 of Swimming Pool :
FLOOR INLET External eye ball thread of 2”
glued to internal slope 50mm UPVC pipe
suitable for flow 9cum/hr
Make: Abyss, Astral or equivalent or better as
per sample approved by the Engineer-inEach
charge
125.00
Supply, installation, testing and commissioning
3 of Swimming Pool :
LADDER 3 STEPS, Stainless Steel TREADS,
Hand rails Dia 43 mm and polished Stainless
Steel 304; with Stainless Steel treads,Plastic
non-slip surface and anchors.Tread width 500
mm. 3 Steps ladder
Make: Abyss, Astral or equivalent or better as
per sample approved by the Engineer-inEach
charge
4.00
Supply, installation, testing and commissioning
4 of Swimming Pool :
LADDER 5 STEPS Stainless Steel TREADS Hand
rails Dia 43 mm Hand polished SS 304 with
S.S. treads,Plastic non-slip surface and
anchors.Tread width 500 mm. 3 Steps
Make: Abyss, Astral or equivalent or better as
per sample approved by the Engineer-inEach
charge
10.00
Supply, installation, testing and commissioning
5 of Swimming Pool :
GRATING Tile Grating made of stabilized
polypropylene Against Ultra Violet rays, white
in color, Shape rectangular 10 pcs. 293mm.
joint together to make cross Wide section of
295mm and 20mm thickness.
Make: Abyss, Astral or equivalent or better as
per sample approved by the Engineer-inmetre
charge
YAMUNA SPORTS COMPLEX
560.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
Supply, installation, testing and commissioning
6 of Swimming Pool :
GRATING PROFILE Grating support holder for
grating inner dimension is 24mmx37mm
Make: Abyss, Astral or equivalent or better as
per sample approved by the Engineer-inMetre
charge
880.00
Supply, installation, testing and commissioning
7 of Swimming Pool :
FLOAT LINES Float lines 50m long With
orange and white balls.
Make: Abyss, Astral or equivalent or better as
per sample approved by the Engineer-inEach
charge
19.00
Supply, installation, testing and commissioning
8 of Swimming Pool :
Anchors Cup for line rope With rod for
concrete poolsMade of stainless steel.
Make: Abyss, Astral or equivalent or better as
per sample approved by the Engineer-inEach
charge
19.00
Supply, installation, testing and commissioning
9 of Swimming Pool :
FALSE START INDICATOR Made of 2 stainless
posts 1.8m height and 43mm dia.
Make: Abyss, Astral or equivalent or better as
per sample approved by the Engineer-inEach
charge
2.00
Supply, installation, testing and commissioning
10 of Swimming Pool :
BACK STROKE INDICATOR For indicating back
stroke swimmers Proximity of the end of the
pool. Comprising of 4 posts in stainless steel
43mm dia with 1.8m height
Make: Abyss, Astral or equivalent or better as
per sample approved by the Engineer-inEach
charge
4.00
Supply, installation, testing and commissioning
11 of Swimming Pool :
STARTING BLOCKS Starting block with base in
stainlesssteel platform
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
Steps in polyester and fibre glass anti-slip
material. Horizontal platform adjusts to
regulations 120mm fixing by anchor
nuts.Supplied Platform of R.C.C. Ht. in 700mm
Make: Abyss, Astral or equivalent or better as
per sample approved by the Engineer-inEach
charge
18.00
Supply, installation, testing and commissioning
12 of Swimming Pool :
FLOAT LINE STORAGE Made in SS-316,
Storage of the float lanes beneath the
deck.Float lane Box is embedded in the pool
surround
Make: Abyss, Astral or equivalent or better as
per sample approved by the Engineer-inEach
charge
19.00
Supply, installation, testing and commissioning
13 of Swimming Pool :
Deck Anchors Made of Stainless Steel -316
With slip-fit cap for covering socket
Make: Abyss, Astral or equivalent or better as
per sample approved by the Engineer-inEach
charge
12.00
Supply, installation, testing and commissioning
14 of Swimming Pool :
LIFE HOOKS Life Saving Loop, made of
Stainless Steel 304 ,Connected to telescopic
handles Butterfly nut ALS001
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Make: Abyss, Astral or equivalent or better as
per sample approved by the Engineer-inEach
charge
Quantity
Rate in fig. and
in Words (INR) Amount in INR
8.00
Supply, installation, testing and commissioning
15 of Swimming Pool :
LIFE GUARD CHAIR Made in S.S. 304,Dia 43
mm pipe with dismountable base plate.Steps,
platform including parasol holder made of S.S.
Chair in Polypropylene/ fiberglass.
Make: Abyss, Astral or equivalent or better as
per sample approved by the Engineer-inEach
charge
4.00
Supply, installation, testing and commissioning
16 of Swimming Pool :
LIFE BUOYS Life Buoy made of Orange colour
plastic,External dia. 730 mm
Make: Abyss, Astral or equivalent or better as
per sample approved by the Engineer-inEach
charge
17
14.00
Supply and installation of all interconnecting
pipe and fittings and valves in UPVC
10Kg/cm2
Make
:
FINOLEX/
SUPREME/Gorge Fisher or equivalent, as per
the sample approved by the Engineer-incharge.The various pipe sizes shall be design
to achieve the following velocities of flow
including cost of Elbows, Tees and such other
fittings, as per directions of Engineer-incharge. (Concealed work)
I) Return Line : 1.8 - 2.1m/sec.
II) Suction Line : 1.2 - 1.5m/sec.
III) Over flow Line : 0.6 - 0.8m/sec.
a) 63mm outer dia. Pipes
metre
70.00
b) 90mm outer dia. Pipes
metre
145.00
c) 110mm outer dia. Pipes
metre
90.00
d) 140mm outer dia. Pipes
metre
240.00
e) 200mm outer dia. Pipes
metre
255.00
YAMUNA SPORTS COMPLEX
TENDER
S.No. Description of Item
Unit
Quantity
f) 250mm outer dia. Pipes
metre
190.00
g) 315mm outer dia. Pipes
metre
140.00
YAMUNA SPORTS COMPLEX
Rate in fig. and
in Words (INR) Amount in INR
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
19 Field of Plays
1 Earth Work
a
b
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual means
in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on plan)
including dressing of sides and ramming of
bottoms, lift upto 1.5 m, including getting out
the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50
m.
All kinds of soil.
Cum
326.00
Earth work in surface excavation not
exceeding 30 cm in depth but exceeding 1.5 m
in width as well as 10 sqm on plan including
disposal of excavated earth upto 50 m and lift
upto 1.5 m, disposed soil to be levelled and
neatly dressed :
All kinds of soil.
100 sqm
6388.00
2 Concrete Work
a
Providing and laying in position ready
mixed concrete manufactured in fully
automatic batching plant and transported
to site of work in transit mixer for all leads
and lifts having continuous agitated mixer,
manufactured as per mix design of
specified grade for cement concrete work
including pumping of R.M.C. from transit
mixer to site of laying , excluding the cost
of centering, shuttering and finishing, but
including the cost of admixtures in
recommended proportions as per IS :
9103 to accelerate/ retard setting of
concrete, improve workability without
impairing strength and durability as per
direction of the Engineer - in - charge. M10 grade cement concrete by using 164 kg
of cement per cum of concrete. All works
cum
up to floor V level.
YAMUNA SPORTS COMPLEX
40.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
b Providing and laying in position ready mixed
concrete manufactured in fully automatic
batching plant and transported to site of work
in transit mixer for all leads and lifts having
continuous agitated mixer, manufactured as
per mix design of specified grade for cement
concrete work including pumping of R.M.C.
from transit mixer to site of laying , excluding
the cost of centering, shuttering and finishing
including cost of admixtures in recommended
proportions as per IS : 9103 to accelerate/
retard setting of concrete, improve
workability without impairing strength and
durability as per direction of the Engineer - in
- charge. M-25 grade cement concrete by
using 410kg of cement per cum of concrete.
All works up to floor V level.
cum
10.00
3 Brick Work
a Brick work with Cement flyash brick of
class designation 75 in foundation and
plinth with cement mortar 1:6 (1 cement :
cum
6 coarse sand).
58.00
4 Hockey Field of Play without turf
a
Providing, laying, spreading and compacting
specified graded sand, stone aggregate or any
other coarse material as per MoRTH
specifications (Table 400-1) gradation-III of
C.B.R. value not less than 20 in lower granular
sub-base course 150mm thick including
premixing the material to OMC in mechanical
mixer (pug mill) carriage of mixed material.
spreading with motor grader on a prepared
base compacting with power roller to achieve
the required density i/c all material, labour,
machinery, lightening, guarding, barricading
etc.
cum
YAMUNA SPORTS COMPLEX
1916.00
TENDER
S.No. Description of Item
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
b
Providing, laying, spreading and compacting
wet mix macadam (WMM) base comprising of
graded stone aggregate and granular material
conforming to MOST specification (Section
400) as per Table No.400.11 in one uniform
thick layer compacted thickness 125mm.
consolidating including p[remixing the
material with water at OMC in mechanical
mixer (pugmill), carriage by mechanical
transport spreading on a well prepared sub
base and compacting with power vibratory
roller to achieve desired density at OMC i/c all
materials, labours, machinery lighting
guarding, barricading etc., complete for all
lead and lift. (Based on MoRTH Specification
401)
cum
1598.00
Providing and laying Bituminous Macadam on
prepared surface with specified graded
crushed stone aggregate for profile corrective
base/ binder course including loading of
aggregate with F.E. loader , hot mixing of
stone aggregates and bitumen in hot mix
plant, transporting the mixed material by
tippers to paver and laying the mixed material
with paver finisher fitted with electronic
sensing device to the required level and grade
and rolling with road rollers, as per MORTH
specification to achieve the desired density
and compaction but excluding the cost of
primer/ tack coat.
40mm average compacted thickness with
bitumen of 60/70 grade @ 3.5% (Percentage
cum
by weight of total mix)
512.00
c
d Providing and applying tack coat using hot
straight run bitumen of grade 80/ 100
including heating the bitumen, spraying the
bitumen with mechanically operated spray
unit fitted on bitumen boiler, cleaning and
preparing the existing road surface as per
specifications :
On W.B.M. @ 0.75 Kg / sqm.
YAMUNA SPORTS COMPLEX
sqm
12776.00
TENDER
S.No. Description of Item
YAMUNA SPORTS COMPLEX
Unit
Quantity
Rate in fig. and
in Words (INR) Amount in INR
TENDER
Abstract of Cost
Name of work: Construction of Archery Competition venue and Training venues
for Archery, Hockey & Lawn Bowls and refurbishment of training venues for
Aquatics and Rhythmic Gymnastics at Yamuna Sports Complex for
Commonwealth Games, 2010.
S.No.
Name of Sub head
1 Earth Work
2 Concrete Work
3 Reinforced Cement Concrete Work
4 Brick Work
5 Wood Work
6 Steel Work
7 Flooring
8 Roofing
9 walls & surface finishes
10 Fire & Sound Proofing
11 Stainless Steel work
12 Fitments of toilets and change rooms
13 Aluminium Work
14 Miscellaneous
15 Glazing & External Facad
16 Plumbing & sanitary services
17 External Services
18 Pool Basin Equipments
19 Field of Plays
Amount
2
RsRsRsRsRsRsRsRsRsRsRsRsRsRsRsRsRsRsRsRs2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement