Home Decorators Collection 0512850100 Instructions / Assembly

Home Decorators Collection 0512850100 Instructions / Assembly
CORD COVER INSTALLATION INSTRUCTIONS
1. Install silver metal channel, open side out, onto wall using
screws provided. The top of the channel should be about 7-1/2
inches below the bottom edge of the swing arm lamp base, use
plastic anchors if needed for hollow wall installation.
2. Route wire through chann:l. Push brass cord covers onto channel,
Each cord cover should cover about one half of the channel. If
adjustments need to be made. Pull cord covers off of channel.
Reposition and them push back.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement