Hampton Bay | 25723-HBU | Instructions / Assembly | Hampton Bay 25723-HBU Instructions / Assembly

Item #1000 031 357
Model #25723-HBU
USE AND CARE GUIDE
OLIVET 3-LIGHT VANITY FIXTURE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-855-HD-HAMPTON
HAMPTONBAY.COM
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this 3-light vanity
fixture. We strive to continually create quality products designed to enhance your home. Visit us online to see our full
line of products available for your home improvement needs. Thank you for choosing Hampton Bay!
Table of Contents
Table of Contents........................................2
Safety Information......................................2
Warranty..................................................... 2
Pre-Installation...........................................3
Planning Installation ................................3
Tools Required..........................................3
Hardware Included.................................3
Package Contents...................................4
Installation................................................5
Care & Cleaning........................................7
Troubleshooting........................................7
Safety Information
Read all instructions before assembling and
installing.
Consult a qualified electrician for installation of this
fixture.
If you have any non-electrical questions about this
fixture, please contact our Customer Service Team
at 1-855-HD-HAMPTON or visit
www.hamptonbay.com.
Please reference your SKU 1000 031 357 or
(UPC 773546247276).
Keep your receipt and these instructions for proof of
purchase.
CAUTION: Before starting installation of this fixture or
removal of a previous fixture, disconnect the power by turning
off the circuit breaker or by removing the fuse at the fuse box.
IMPORTANT: Do not install this lighting system in a wet
location.
IMPORTANT: Inspect the wire insulation for any cuts,
abrasions, or exposed copper that have occurred during
shipping. If there is a defect in the wire, do not continue the
assembly process. Please call our Customer Service Team at
1-855-HD-HAMPTON.
Warranty
LIMITED WARRANTY
WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period
of five (5) years from date of purchase. This warranty applies only to the original consumer purchaser and only to
products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation,
and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided
that the product has not been damaged through misuse, abuse, accident, modification, alteration, neglect, or
mishandling.
WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any
way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of
the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure
not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the
product, such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not
warrant and specially disclaims any warranty, whether express or implied, of fitness for a particular purpose, other
than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for
any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the
replacement or repair of said product.
Contact Customer Care at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
2
Pre-Installation
PLANNING INSTALLATION
Read all instructions before assembly and installation. To avoid damaging this product, assemble it on a soft,
non-abrasive surface, such as carpet or cardboard. Inspect each part for defects that may have occurred during
shipping. Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED
Safety goggles
Phillips screwdriver
Wire strippers
Flathead screwdriver
Wire cutters
Ladder
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA
FF
Part
AA
BB
CC
DD
EE
FF
GG
HH
II
JJ
BB
CC
DD
GG
HH
II
Description
Wire nut
Outlet box screw
Ground screw
Mounting screw
Backplate
Socket ring
Tapping screw
G9 bulb
Anchor
Socket ring tool
EE
JJ
Quantity
3
2
1
4
1
3
2
3
2
1
3
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Installation (continued)
PACKAGE CONTENTS
B
A
Part
A
B
Description
Fixture body
Glass shade
Quantity
1
3
4
Installation
1 Installing the universal crossbar 2 Making the electrical connections
NOTE: Always use the wire nuts (AA) to connect wires and
push all excess wires and connections back into the junction
box (not included).
WARNING: Turn off power at the main fuse box.
Fasten the open end of the ground wire (bare
copper or green wire) to the ground wire from
the junction box or the ground screw (CC) on
the backplate (EE).
Connect the black wire of the power supply to
the black wire of the fixture and connect the
white wire of the power supply to the white
wire of the fixture.
Carefully unpack the fixture. Lay out all the parts
on a clean surface.
Unscrew the mounting screws (DD) from the
fixture body (A) and remove the backplate (EE).
Using the backplate (EE) as a guide, mark on
the wall with the outlet box (not included) the
locations for anchors (II) with a pencil (not
included). Drill a 1/4 in. hole at marks, then
insert anchors (II). Secure the backplate (EE) to
the outlet box with the outlet box screws (BB).
Align the keyholes in the backplate (EE) with the
anchors (II) and insert the tapping screws (GG).
II
EE
DD
CC
AA
EE
BB
GG
WHITE WIRE
WHITE WIRE
FROM HOUSE
FROM FIXTURE
BLACK WIRE
BLACK WIRE
FROM HOUSE
FROM FIXTURE
GROUND WIRE
GROUND WIRE
FROM HOUSE
FROM CANOPY
3 Installing the fixture body
Attach the fixture body (A) to the backplate
(EE) and secure it with the supplied mounting
screws (DD).
EE
A
DD
5
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation (continued)
4 Installing the glass shades
5 Installing the bulbs
Remove the socket ring (FF) from the socket of
the fixture body (A) by hand.
Place the glass shade (B) on the socket. Secure
with the socket ring (FF) by using the socket
ring tool (JJ). Do not overtighten.
Repeat for the other glasses (B).
Install 60W max. G9 bulbs (HH) (included) to
each socket of the fixture body (A).
HH
A
JJ
FF
A
B
6
Care and Cleaning
Clean the light fixture carefully with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or
harsh abrasives.
Troubleshooting
Problem
The bulb will not light.
The fuse blows or the circuit
breaker trips when the light
is turned on.
Possible Cause
Solution
The bulb is burned out.
Replace the light bulb.
The power is off.
Ensure that the power supply is turned
on.
The circuit breaker is off.
Ensure that the circuit breaker is set to
the ON position.
There are too many items on
one circuit.
Unplug the other items on the circuit.
7
Contact a qualified electrician or
call the Customer Service Team at
1-855-HD-HAMPTON.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
Download PDF