Hampton Bay | CHO1691S� | Instructions / Assembly | Hampton Bay CHO1691S� Instructions / Assembly

A
○
ASSEMBLY INSTRUCTION
SKU#254-531
NOTE: Please consult a qualified electrician if you are not certain of the installation.
CAUTION: Before starting the installation, disconnect the power by turning off the circuit breaker or by
removing the fuse at the fuse box. Caulk to the mounting surface at top and sides.
1. Fasten mounting strap onto outlet box using outlet box screws provided.
2. Connect the wires white to white and black to black. Cover the connections using 2 wire connectors
provided. Tie the ground wires from outlet box and from fixture to the ground screw on the mounting
strap.
3. Place the fixture body to the wall with nipple 2 to pass through the central hole of the wall plate and
secure the fixture to the wall with pipe cap.
4. Install the bulb. (Included)
5. Screw nipple 1 down to the bushing of the fixture and fasten it by tightening the hex nut.
6. Place the decorative shade over the nipple 1 on the fixture and fasten it with the finial.
7. Turn on the power.
Download PDF