Epson EX100 Projector User manual
Epson EX100: Experience Captivating Presentations and Immersive Multimedia Content
Harness the power of Epson EX100, a versatile projector designed to elevate your presentations and multimedia experiences. With its advanced features, this device caters to the needs of professionals, educators, and home enthusiasts alike.
-
Immersive Visuals: Captivate your audience with stunning visuals, thanks to the projector's XGA resolution and 2500 lumens of brightness. The vibrant colors and sharp details will ensure your content shines.
-
Flexible Connectivity: Seamlessly connect your laptop, DVD player, or gaming console via multiple input options, including HDMI, VGA, and USB. Unleash your creativity and enjoy a wide range of multimedia content.
Advertisement
Advertisement
EX100
Quick Setup
Follow these instructions to connect the projector to your notebook. For other setup options, such as using the included VGA-to-Component Video adapter, see your User’s Guide.
Connect the projector to your notebook
Before using the projector, make sure you read the safety instructions in the User´s Guide on your projector CD.
1
Locate the required cables:
Power cord VGA computer cable
2
Connect the computer cable to the blue Computer/Component Video port on the projector.
3
Connect the other end to your notebook’s video-out or monitor port.
4
Connect the power cord to the projector, then plug the other end into an electrical outlet.
3
Make sure the Power light is orange and not flashing.
Power light
Power button
4
Press the Power button to turn on the projector.
CAUTION: Before unplugging the projector...
Shut down the projector properly:
1. Press the Power button twice.
2. When the orange light stops flashing and the projector beeps, you can unplug the projector.
Adjust the image
1
If you’ve turned on your notebook and you don’t see an image, press the Source Search button on the projector or remote control to select the image source.
NOTE: If you still see a blank screen or have other display problems,
see the troubleshooting tips on the back of this sheet.
2
To raise the image, press the blue foot release button for the front adjustable foot and lift the front. Release the button to lock the foot in position.
Turn on your equipment
1
Turn on your notebook.
2
Open the A/V Mute slide (lens cover).
3
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
Focus
Zoom
4
If your image looks like or , you’ve placed the projector off to one side of the screen at an angle. Place it directly in front of the center of the screen, facing the screen squarely.
5
If your image looks like or , press the or buttons on the projector to correct it.
NOTE: The slide must be opened completely.
*411491900*
*411491900*
Turn over
4114919 Rev.0
1-F C
4114919 Rev.0
1-F M
4114919 Rev.0
1-F Y
4114919 Rev.0
1-F K
Using the remote control
If this is your first time using the remote, make sure its batteries are installed as shown (two AAA batteries).
Turn off projector display and sound
Choose which source to display
Optimize the computer image
Turn projector on and off
Zoom in on part of the projected image
Navigate projector menus
Control projector volume
You can use the remote control to operate the projector. With the USB cable, you can use the remote as a wireless mouse. For more information on using the remote control, see your User’s Guide.
Where to get help
For more information about using the projector, install the User´s Guide from your projector CD.
Telephone Support Services
To use the Epson PrivateLine ® Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card included with your projector.
This service is available 6 AM to 6 PM , Pacific Time, Monday through
Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of these numbers:
U.S.: (562) 276-4394, 6 AM to 6 PM , Pacific Time,
Monday through Friday
Canada: (905) 709-3839, 6 AM to 6 PM , Pacific Time,
Monday through Friday
Days and hours of support are subject to change without notice. Toll or long distance charges may apply.
Internet Support
Visit Epson’s support website at epson.com/support and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions.
Visit http://www.presentersonline.com to access tips, templates, and training for developing successful presentations.
Register today to get product updates, special promotions, and customer-only offers. You can use the registration card or CD included with your projector, or register online at www.epson.com/webreg.
Quick Setup
EX100
Troubleshooting
If you see a blank screen...
If you see a blank screen or the No signal message after turning on your notebook, check the following:
•
Make sure the Power light on the projector is green and not flashing, and the A/V Mute slide is open.
•
Press the Source Search button on the projector or the remote control to select the computer as the image source.
•
If you’re using a Windows ® notebook, press the function key on your keyboard that lets you display on an external monitor. It may be labelled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it. Allow a few seconds for the projector to sync up after changing the setting.
If the projector and notebook don’t display the same image...
If your image displays either on the projector or notebook, but not on both, follow the steps below. Note that some notebooks cannot display the same resolution and/or aspect ratio on both the LCD screen and the projected image.
Windows
Try using the CRT/LCD or key as described above. On most systems, this key lets you toggle between the LCD screen and the projector, or display on both at the same time.
If that doesn’t work, check your monitor settings to make sure both the
LCD screen and the external monitor port are enabled.
1. From the Windows Control Panel, open the Display utility. In Windows
Vista ® , right-click on the desktop and select Personalize, then select
Display Settings.
2. In the Display Properties dialog box, click the
Settings tab, then click Advanced. In
Windows Vista, click Advance Settings.
3. The method for adjusting the setting varies; you may have to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled.
See your notebook’s manual or online help for details.
Mac OS ® X
1. From the Apple ® or Displays.
menu, select System Preferences, then select Display
2. Click Detect Displays.
3. Make sure the VGA Display or
Color LCD dialog box is selected.
4. Click the Arrangement or Arrange tab, then make sure the Mirror
Displays checkbox is selected.
Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson
Corporation. PrivateLine is a registered trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2008 Epson America, Inc. 5/08
Printed in XXXXXX CPD-25704
4114919 Rev.0
1-B C
4114919 Rev.0
1-B M
4114919 Rev.0
1-B Y
4114919 Rev.0
1-B K

Public link updated
The public link to your chat has been updated.
Advertisement