MT-726TWIN COVER
DENVER MT-726 TWIN
PORTABLE DVD PLAYER WITH 7” TFT/LCD SCREEN AND 7” SLAVE UNIT
Content
1
2
3
4
7
05
08
PRECAUTIONS........................
CAUTIONS ON USING THIS PLAYER
PORTABLE DVD ACCESSORIES............10
SPECIFICATION........................11
TYPES OF DISCS PLAYABLE ON THIS
PLAYER................................11
PORTABLE DVD SPECIFICATIONS................11
MONITOR ACCESSORIES AND SPECIFICATIONS.....12
5
6
PARTS NAME AND FUNCTION.............
USING THE BATTERY.......................22
PRECAUTIONS BEFORE USING
THE BATTERY................................22
BATTERY STORAGE................................ 22
BATTERY LIFE................................... 22
USING THE BATTERY.............................. 22
INSTALLING AND REMOVING THE BATTERY............ 2
RECHARGING THE BATTERY BY USING
AC-DC ADAPTER............................. 24
CAUTIONS WHEN CHARGING THE BATTERY............. 24
13
PART IN THE FRONT OF THE PLAYER...........
KEYPAD IN THE PLAYER......................
PART IN THE FRONT OF THE MONITOR..........
KEYPAD IN THE MONITOR.....................
PART IN THE BACK OF THE PLAYER............
PART IN THE RIGHT SIDE OF THE PLAYER......
PART IN THE LEFT SIDE OF THE PLAYER.......
PART IN THE TOP OF THE PLAYER............
PART IN THE BACK OF THE MONITOR...........
PART IN THE LEFT SIDE OF THE MONITOR......
REMOTE CONTROL UNIT.......................
13
13
14
14
15
15
16
16
17
17
18
USING REMOTE CONTROL UNIT.........
20
8
CONNECTING THE PLAYER TO OTHER
COMPONENTS...........................25
CONNECTING TO AC-DC ADAPTER.................... 25
CONNECTING EARPHONE............................ 25
CONNECTING TO USB STORAGE...................... 26
CONNECTING TO MEMORY CARD...................... 2 6
CONNECTING TO A TV SET......................... 27
CONNECTING TO AN AMPLIFIER..................... 28
CONNECTING TO AN ACTIVE SPEAKER SYSTEM......... 29
CONNECTING TO AN AUDIO/VIDEO PLAYER
SYSTEM IF YOU WANT THE UNIT AS A MONITOR....... 30
CONNECT TO A MONITOR........................... 3 1
PRECAUTIONS BEFORE USING REMOTE
CONTROL UNIT......................... 20
RANGE................................ 20
INSTALL BATTERY FOR REMOTE
CONTROL UNIT.......................... 21
03
Content
9
BASIC OPERATIONS......................
32
TURNING ON/OFF THE MAIN UNIT.............. 32
PLACING DISC............................ 33
PLAYING DISCS..............................33
REMOVING DISCS.............................33
MODE SETTINGS (BRIGHTNESS/CONTRAST/
COLOR/TFT DISPLAY MODE/TFT REVERSE
MODE/AV OUT/IN MODE)....................34
STOPPING THE PLAYING.......................35
PAUSING THE DISC...........................35
SCANNING FORWARD AND BACKWARD..............35
REPEAT PLAYING THE DISC....................36
ZOOM PLAYING...............................36
PROGRAM PLAYING............................37
USING OSD..................................38
SELECTING A SUB-TITLE......................38
SELECTING AN AUDIO.........................38
SELECTING AN ANGLE.........................38
PLAYING AUDIO FILES AND JPEG DISC..........39
PLAYING THE FILE STORING IN A USB
STORAGE....................................40
PLAYING THE FILE STORING IN A
MEMORYCARD.................................40
10
MAIN UNIT SETTINGS......................41
SELECTING A TV SYSTEM..........................41
SETTING SCREEN SAVER............................
41
SELECTING A TV SCALE...........................42
SETTING PARENT LOCK............................42
SETTING PARENT LOCK LEVEL......................43
DEFAULT SETTING................................43
SELECTING A OSD LANGUAGE.......................44
SELECTING AN AUDIO LANGUAGE....................44
SELECTING A SUBTITLE LANGUAGE..................44
SELECT A MENU LANGUAGE.........................44
11
TROUBLE SHOOTING....................... 45
04
P recautions
1
Thank you for purchasing Portable DVD player. Please read this manual carefully before operating and
reserve it for future reference. It will be helpful to you if you encounter any operational problem.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE, DRIPPING OR SPLASHING AND THAT NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE
ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED
PERSONNEL ONLY.
ATTENTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT, FULLY INSERT.
LASER:
This Digital Video Disc player employs a Laser System.To ensure proper use of this
product, please read this owner s manual carefully and retain for future reference.
Should the unit require maintenance, contact an authorized service location - see
service procedure.
Use of controls, adjustments or the performance of procedures other than those
specified may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
Visible and invisible laser radiation when open and interlocks defeated.
DO NOT STARE INTO BEAM
LASER
Type
Wave length
Output Power
Beam divergence
Semiconductor laser GaAIAs
650 nm/780nm
5mW
60degree
CLASS 1
LASER PRODUCT
05
P recautions
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION:
Use of controls or adjustments or performance of proceduresthose specified may result in hazardous
radiation exposure.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN
To reduce the risk of electric shock, do not remove cover (or back).
No user serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol, with in an equilateraltriangle, is intended to
alert user to the presence of uninsulated“dangerous voltage” within the product enclosure
that may beof sufficient magnitude to constitute a risk of electric shock to persons.
!
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of imporant operating andmaintenance (servicing) instruction in the literature
accompanying the applianc
CAUTION:
INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCK FAILED OR DEFEATED.
AVOID DIRECT EXPOSURE TO LASER BEAM.
06
1
P recautions
1
07
Cautions on Using this P layer
Do not move the player during playback
During playback, the disc spins at high
speed, so do not lift or move the player.
Doing so may damage the disc.
Transporting the player
When transporting the player be sure to remove
the disc and turn off the power, then unplug
the power cord .
Place of installation
Select a stable place near the TV or stereo system
to which you are going to connect the player.
Do not place the player on top of a TV or color
monitor. Install the player away from cassette
decks or other devices which are easily affected
by magnetic forces.
Special note regarding use of
player in vehicles
Unit must not be used when the vehicle is
moving at all.
Most countries and states have laws which
prohibit or severely restrict the use of the
player in vehicles while driving.
Do not leave the player or the battery pack in
places where the temperature is extremely
low (about-10℃ or lower) or extremely high
(about 60℃ or higher), such as inside the
passenger cabin or trunk in midsummer.
Doing so may warp the outer case or reduce
the performance or quality
of the battery pack.
When carrying on planes
Do not place objects on top of the player
Do not place any objects on top of the player.
Heed the airline company's rules.
Turn off the power when not using the player
If the player is connected to your TV but not in
use then switch the power off this will prevent
interference with your normal TV picture.
Noise problems may also be experienced if used
near a radio.
08
When carrying in hospitals
Heed the hospital's rules.
2
Headrest bag
Partable DVD Specifications
The discs listed on the below
can be played on this player
without any adapter
Specifications
DVDs
JPG
CD-DA
JPEG
DVD Video
Video CD
Disc type
8cm/12cm;
Vedio CDs 8cm/12cm;
Audio output
Audio CDS 8cm/12cm;
Video output
JPG CDs
LINE OUT(20Hz-20kHz)
Earphone output
4
Video output
Video output: 1.0Vpp/75ohm
8cm/12cm.
7``color TFT
LCD panel
AC-DC adapter 12V/1.2A
Rechargeable AA 1.2V battery
Power
Noted:
Don't using the disc that is
scratched seriously
Unit size
220mmX150mmX34.5mm
665g
Weight
Working
temperature
5 C~45 C
11
Monitor accessories and specifications
After unpacking, check that all the accessories listed below are included.
AC&DC Cable(optional)
Operating instructions (this manual)
OPE
RAT
ION
INS
TRU
CTI
Ear phone
4
ONS
Specifications
Audio input
1Vrms
2Vrms
LCD panel
Video input
1.0Vpp/75ohm
Unit size
Power
DC 12V/0.6A
Weight
Earphone output
20Hz-20kHz
Working
temperature
12
7``color TFT
220mmX150mmX34.5mm
470g
5 C~45 C
Portable DVD parts name and function
Keypad in the main unit
Part in the front of the player
1
4
2
3
5
3
6
1
2
4
3
7
1.
1. T F T c o v e r
2. L C D d i s p l a y
3. S p e a k e r s
4. C o n t r o l k e y p a d
5. I R r e c e i v e r w i n d o w
6. P o w e r L E D i n d i c a t o r
Button
Press this to play disc. When press this
in the play mode, pause mode is set. Press
again to resume playback.
2.
5
Button
Press this to stop play mode
LED light: Power switch is on
/
3.
LED off: Power switch is off
Buttons
Using these buttons to scan backward or
forward through the tracks or chapters.
7.O p e n T F T c o v e r
4.
Pull the part according to the direction
then open the TFT cover.
Button
Press these buttons to increase/decrease
the volume when the main unit is in play mode.
13
Monitor parts name and function
Keypad in the monitor
Part in the front of the monitor
P/P
MENU
1
2
3
1
2
4
M U TE
3
M ODE
M /M+
4
5
1. P/P Button
2
Press the button to set BRIGHT or PASTEL
or VIVID or STANDARD or NORMAL.
2. MENU Button
Press the button to select Brightness,
Contrast,color,then use M-/M+ buttons
to adjust.
1. LCD display
2. Speakers
3. Control keypad
4. Power LED indicator
3. MUTE Button
5
Press the button to mute the audio output.
4. MODE Button
Press the button to select screen NORMAL L
TO R or NORMAL R TO L or REVERSE L TO R or
REVERSE R TO L,then use M-/M+ buttons to adjust .
LED light: Power switch is on
LED off: Power switch is off
5. M /M+ Buttons
Press these buttons
the volume when the
Press these buttons
Contrast,Color.
Press these buttons
14
to increase/decrease
monitor is in play mode.
to adjust Brightness,
to adjust screen mode.
Portable DVD parts name and function
Part in the back of the player
Part in the right side of the player
2
2
1
1
1
5
1.Memory card socket (optional)
1. Support
Suit for SD/MMC/MS card reader
Pull out the support to the proper
position in order to let the unit
stand.
2.USB(1.1)socket (optional)
connecting USB storage
2. Battery cover
Open the battery cover and place
six rechargeable AA 1.2V batteries
into it.
15
Portable DVD parts name and function
Part in the top of the player
Part in the left side of the player
ON/OFF
AV I N/ OU T
DC O UT 1 2V
DC I N 12 V
1
1
2
3
4
1. Earphone jack,
1.Power switch
connecting to earphone
Turn ON/OFF the unit
2. Audio/Video input or output,
input/output audio/video signal
3. 12V DC output
Connecting to the monitor.
4. 12V DC input
Connecting to the AC-DC adapter or car
adapter.
16
5
Monitor parts name and function
Part in the back of the monitor
Part in the left side of the monitor
AV I N
1
1
1
1. Support
Pull out the support to the proper
position in order to let the unit
stand.
2
DC O UT 1 2V
3
DC I N 12 V
4
1. Earphone jack
connecting to earphone
Part in the top of the monitor
5
2. Audio/Video input
Input audio/video signal
ON/OFF
3. 12V DC output
1
1.Power switch
Turn ON/OFF the unit
4. 12V DC input
Connecting to the DVD Player.
Push power switch to ON to turn on
the monitor when the unit is power,
power indicator led light.
Push power switch to OFF to turn off
the monitor,power indicator led off.
17
Portable DVD parts name and function
Remote control unit
1
Power on/off the unit
1
2
8
9
10
11
15
13
18
20
21
22
23
24
OK
4
3
2 MODE
5
7
6
12
14
16
17
19
25
26
3 OSD
Press this to switch LCD mode
Press this buttons to
displaythe disc and playing
information in the LCD
4
Switch off the speakers
or earphone
5 VOL+
27
28
29
Increasing the volume
6 VOLDecreasing the volume
7
30
Return to menu.
8 SETUP
Set up menu when the unit in play mode
9
Moving cursor Up
18
5
Portable DVD parts name and function
Remote control unit
20
10
Moving cursor let
11 OK
this to confirm settings
21 REPEAT
DVD: repeat play the title,
chapter
VCD,CD: repeat the track or
whole disc
12
Moving cursor Right
13
22 A-B
Moving cursor down
Stop playing disc
15
Skip previous track/chapter
Press this to select
the DVD angle
29 C
Clearing the digit
that is just input
5
23 Audio
DVD: selecting audio
language
VCD or CD: Selecting
the audio channel
16
Skip next track/chapter
17 ZOOM
24 SUBTITLE
Zooming the picture
19
Displaying DVD title
28 Angle
Press this to set A point, press
30 DIGIT INPUT
again to set B point, then the
unit playing from A to B repeated.
Press 3'rd to cancel the A-B play.
14
18
27 Title
Press this to play or pause
Selecting sub-title
Press this to fast backward
25 MENU
play when the unit in play mode
Menu play
Press this to fast forward play 26 PROGRAM
Programming the play
when the unit in play mode
sequence
19
USING REMOTE CONTROL UNIT
Precautions before using remote control unit
Please pull out the PVC when the remote control unit is first using
Don't drop or step on the remote control unit or subject it to shocks
Note that it may not be possible to operate the main unit if there are obstacles between
it and the remote sensor
Don't expose the remote sensor to strong light.
Using the remote control unit within the specified operating range.
Remote control unit operating range
。
+ 30
<1> Horizontal:+ 30。
<2> Vertical: <3> Distance: 5m
AV I N/ OU T
DC O UT 1 2V
6
DC I N 12 V
< 5米
Note:
Most of the player's functions can be performed from
the remote control unit. Some operations, however,
only be performed from the main unit.
20
OK
USING REMOTE CONTROL UNIT
Replacing
1
the battery
Place your finger nails onto A on the
diagram below, push A according to the
direction, then open th e battery cover .
Note:
To prevent leakage of fluid from the
battery, remove the battery when not
using the remote control unit for long
periods of time (one month or more).
If the battery leaksfluid, carefully
wipe it out of the battery case, then
change to a new battery.
6
A
R03"AAA"1.5V battery
2
Remove the old battery, then insert
the new battery into the battery
holder with the + side correctly.
3
Fit the battery holder back to its
place.
21
USING THE BATTERY
Precautions before using the battery
Battery life
Please fully charge the battery unit before
using it for the first time.The rechargeable
time is about 12-15 hours.
When the battery unit is recharged in a hot
environment, it may not recharge fully
The battery unit becomes hot after recharging,
but this is not malfunction.
To prevent leakage of fluid from the battery,
remove the battery when not using the unit for
long periods of time(one month or more). If the
battery leaks fluid,carefully wipe it out of
the battery case, then change to new batteries.
Battery storage
Please place the battery in a proper environment
(15℃ 25℃). To avoid place the battery in a hot
or lower temperature environment.
Please recharge one time every year if the
battery is not used in a long time.
22
The battery unit can be used for about
300 cycles of recharging and operations,
though this is variable depending on the
operating conditions.
Using the battery
The main unit can be playing over 1.5 hours
if the battery is fully recharged.
The picture may be unstable if the battery
power is not enough.
7
8
3 Power on the unit
4 Set unit to standby by remote control
CONNECTING THE PLAYER TO OTHER COMPONENTS
Before connecting
Turn off the power of the player and the devices to be connected.
Connecting to a TV set
Audio/video output/input
Main unit
left side
AV I N/ OU T
DC O UT 1 2V
DC I N 12 V
Bla c k
Video / audio cable
(included)
V i d eo i n p u t
Aud i o i n p u t
R
Note:
Yellow
White
Red
L
T o video input jack
(yellow)
T o audio input L jack
(white)
T o audio input R jack
(red)
Please set the main unit to AV output mode.
TV
:
8
Signal flow
27
CONNECTING THE PLAYER TO OTHER COMPONENTS
Connecting to a digital amplifier
Audi o / v i deo o utpu t / i nput
M a i n u nit
l e f t s ide
Notes:
Do not play DVDs when the
audio settings are not
correct. Or may cause
strong noise and damage
your speakers.
AV I N/ OU T
DC O UT 1 2V
DC I N 12 V
B l a ck
,
: Signalflow
Video / audio cable
(included)
Wh i t e
Re d
T o d i g ital a udi o
i n p ut j ack
Yellow
V i d e o i nput
Aud i o i n p u t
TV
Left
28
r ight
8
CONNECTING THE PLAYER TO OTHER COMPONENTS
Connecting to active speaker systems
A u dio/video o utput / i n p ut
AV I N/ OU T
DC O UT 1 2V
DC I N 12 V
Main unit left side
B l ack
Video/audio cable
(included)
: Signal flow
Note:
Please set the main unit
to AV output mode.
T o video input
jack
T o Audio input
jacks
Vide o i n put
Whi t e
Red
LEFT
Y ellow
8
RIGHT
TV
Active speaker systems
29
CONNECTING THE PLAYER TO OTHER COMPONENTS
Connecting to a Audio/Video player system if you want the unit as a monitor
A u d io/video o u tput/i n p u t
Main unit left side
AV I N/ OU T
DC O UT 1 2V
DC I N 12 V
Black
Video/audio cable
(included)
: Signal flow
Please set the main unit to
AV input mode.
Yell o w
R ed
Note:
White
To Audio Output
jacks
VIDEO OUT
To Video Output
jacks
Connect to AV system
video output
AV system
AUDIO OUT
L
R
30
8
CONNECTING THE PLAYER TO OTHER COMPONENTS
Connecting to a
monitor
A udio/v i d e o i n put
Monitor left side
DC O UT 1 2V
AV I N
DC I N 12 V
To audio/video
input jack
To DC IN j a c k
AC&DC cable
(included)
: Signal flow
Note:
Please set the main unit to
AV input mode.
AV I N/ OU T
T h e m a i n u n i t l eft s ide
To Audio/video
output jack
DC O UT 1 2V
DC I N 12 V
To DC out jack
8
A C - D C a dap t e r
31
BASIC OPERATIONS
Turning on/off the main unit
1 Turn power on
Push power switch to ON ( main unit) to turn
on the unit when the unit is powered,
power indicator led light.
Power
OK
2 Turn power off
Press POWER (remote control unit) or push
power switch to OFF (main unit) to turn
off the unit, power indicator led off.
9
32
33
Press MODE, setting picture , press ↑/↓ to select Bright,
Contrast and Color. Press←/→ to adjust value.
Press MODE, Setting Volume, press ←/→ to adjust value.
Press MODE , Setting Function, press↑/↓ to select normal
(reverse Mode), zoom (LCD display mode) source (AV
output mode), press ←/→ to confirm what you want.
4
BASIC OPERATIONS
Stopping the playing
1 Press STOP to pause the
playing, the unit can
memorize the play point
2 Press PLAY to continues
play from the pausing point
3 Press STOP to stop the disc
Scanning forward and backward
1. Press
/ (remote control unit)
1.5 seconds to fast the playing
when playing in forward/backward
direction;
2. Change the playing speed to X2, X4,
X8, X20 and normal for every pressing
REV/FWD in the remote control unit.
OK
STOP
PLAY
Note:
The unit can not play to continues
playing for some disc.
OK
Pausing the disc
REV
1 Press PLAY/PAUSE to pause
the playing when playing
2 Press PLAY/PAUSE to
continues playing
FW D
OK
PLAY/PAUSE
9
35
BASIC OPERATIONS
Repeat playing the disc
1
Zoom playing
A-B play mode
Press ZOOM every times,
the picture will change to
2X, 3X, 4X, 1/2X, 1/3X,
1/4X and normal.
Press A-B, the LCD will show
Repeat APress A-B again, the main
unit will repeat the play
from A to B.
Press A-B again, the unit repeat
"A-B "
will resume normal
playing.
OK
ZOOM
2 Repeat playing the title, chapter or track
Press REPEAT to select the title,
chapter or track when the unit is in
play mode
DVD: title, chapter; VCD or CD: track.
9
36
BASIC OPERATIONS
Program playing
The main unit may play the list according to the following
program list:
1. Press PROGRAM, the menu
will be shown in the LCD
PROG
Hint:
T is for Title, C is for
Chapter for DVD disc.
T for track for CD,VCD.
1
2
3
4
T
-----
--- 5
--- 6
--- 7
--- 8
T
-----
C
:
:
:
:
T
--- 9 ----10 ---- 11 ----12 --
Clear
C
2
4
: --: --: ---
C
:
:
:
:
Clear
T
--- 9 ----10 ---- 11 ----12 --
C
:
:
:
:
---------
Exit
4. Using the cursor key to move the
cursor to the CLEAR icon, and press
OK to clear the play list.
Note:
There is no title, chapter or track for some disc.
5. Press PLAY/PAUSE or select the
EXIT icon and press OK to exit
program menu.
Program
Note:
2. Using digit
and cursor to select the
list what you want. See the picture.
Play
T
-----
3. Using the cursor key to move the
cursor to the PLAY icon, and press
OK to start to play the list
: ---
Exit
OK
T C
: 001 5
02 : 002 6
-- : --- 7
-- : --- 8
1 01
3
C
:
:
:
:
Play
OK
PROG
The program list will be cancel when
the main unit is power off or eject the disc.
There is no program function for some disc.
The unit can not play the list if you
select the item that does not exit in
the disc.
9
37
BASIC OPERATIONS
Selecting an audio
Using OSD
1. Press OSD to show the play and disc
information in the LCD when the main unit
is in play mode
2. Press OSD again to disable the information
display
OSD
1. Press AUDIO to select the audio
language when the main unit is in play
mode for DVD disc
2. Press AUDIO to select the audio
channel when the main unit is in play
mode for VCD, CD disc.
AUDIO
OK
Selecting a sub-title
Selecting an angle
Press SUBTITLE to select the sub-title when
the main unit is in play mode
Press ANGLE to select the play angle
when the main unit is in play mode for
DVD disc, there is no function for
other disc.
SUBTITLE
Angle
9
38
BASIC OPERATIONS
Playing audio files and JPEG disc
[MP3_1] 1001.MP3
1
0 1 . M P 3 _ 1
2
0 1 . 1 0 0 1
0 2 . 1 0 0 2
0 3 . 1 0 0 3
0 4 . 1 0 0 4
3
1.
4.
4
Directory
JPEG icon
2.
0 1 . 1 0 0 1
0 2 . 1 0 0 2
0 3 . 1 0 0 3
File
3.
Mp3 icon
0 4 . 1 0 0 4
Using the cursor key
to move the cursor to the directory, file, icon
or JPEG icon
Selecting
icon and press OK if you want to play audio files, selecting JPEG icon
and press OK if you want to play JPEG
Selecting a file and press OK if you want to play the file.
Press PLAY/PAUSE to play sequence
Press A-B to repeat A-B playing.
Note:
The LCD will be off if there is no operation on the unit over 3 minutes when playing
CD.
LCD will be on for any operation on the unit .
9
39
BASIC OPERATIONS
Playing the file storing in a USB storage(optional)
Playing the file storing in a memory card(optional)
Connecting the USB storage to the USB socket
of the main unit, the file stored in the storage
will be read automatically.
Please insert the card (SD,MMC and MS) in to the
socket. The file will be played automatically.
1.Power on the unit, connecting the USB storage
to USB socket. (in no disc mode)
2.“READ USB” will be shown in LCD and the
files will be display in the LCD when the unit
finished the reading.
1. Power on the unit, inserting the card in to
the socket. (in no disc mode)
2.“READ CARD” will be shown in LCD and
the files will be display in the LCD when the
unit finished the reading.
[MP3_1] 1001.MP3
0 1 . M P 3 _ 1
[MP3_1] 1001.MP3
0 1 . 1 0 0 1
0 2 . 1 0 0 2
0 1 . M P 3 _ 1
0 3 . 1 0 0 3
0 1 . 1 0 0 1
0 2 . 1 0 0 2
0 4 . 1 0 0 4
0 3 . 1 0 0 3
0 4 . 1 0 0 4
3. Operation is like play audio file or JPEG file
4. Please remove the USB storage directly when
do not play the USB storage
The audio, video and JPEG file can be
play in this unit
The SD , MMC and MS can be read in this unit
Note:
USB in this unit is USB 1.1
The unit must be in no disc mode when play
the file stored in the USB storage
40
Note:
The unit must be in no disc mode when play
the file stored in the card
9
MAIN UNIT SETTINGS
Press SETUP when the main unit is in play mode. The set up menu will be displayed in LCD.
Selecting a TV system
Setting screen saver
Please select the proper video signal
system if you want to see on a TV set.
NTSC: please select this item when TV set
is NTSC system TV set
PAL: please select this item when TV set
is PAL system TV set
Default:NTSC
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
This function can save the TFT life if he
unit stay in stop, no disc over 1 minutes.
ON: screen saver enable
OFF: screen saver disable
Default: ON
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
NTSC
PAL
EXIT SETUP
ON
OFF
EXIT SETUP
Note:
The picture may be a grey picture if the
system is not correctly set.
10
41
MAIN UNIT SETTINGS
Selecting a TV scale
Setting parent lock
16:9 : Please select this item when
connecting this unit to a 16:9 TV set.
4:3LB : Please select this item when
connecting this unit to a normal TV set.
1.
Default setting: 0000
2.
When unlock, new parent lock can be
input and select the parent lock level
4:3PS : Please select this item when
connecting this unit to a normal TV set.
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
4:3PS
4:3LB
16:9
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
/
/
/
EXIT SETUP
退出设定菜单
EXIT SETUP
Note:
Picture scale is depending the disc.
42
10
MAIN UNIT SETTINGS
Setting parent lock level
Default setting
This setting can control the unit play parent
lock DVD disc.
To restore the factory setting, please
select this item and press OK
Level is divided into 8 level
Selecting ADULT, the lock is cancel
Default: ADULT
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
DEFAULT
EXIT SETUP
1
2
3
4
5
6
7
8
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
KID SAFE
G
PG
PG13
PG-R
R
NC-17
ADULT
RESTORE
EXIT SETUP
Note:
The parent lock level can not be
set if the parent lock is locked.
10
43
MAIN UNIT SETTINGS
Selecting a OSD language
Selecting a sub-title language
Please enter the sub-title language select
menu, use cursor key
to move the cursor
to the language what you want and press
OK
Please enter the OSD language select menu,
use cursor key
to move the cursor to the
language what you want and press OK
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
ENGLISH
CHINESE
GERMAN
SPANISH
FRENCH
FORTUGUESE
EXIT SETUP
EXIT SETUP
CHINESE
ENGLISH
JAPAN
FRENCH
SPANISH
FORTUGUESE
GERMAN
OFF
Select a menu language
Please enter the menu language select
menu, use cursor key
to move the cursor
to the language what you want and press
OK
Selecting a audio language
Please enter the audio language select menu,
use cursor key
to move the cursor to the
language what you want and press OK
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
CHINESE
ENGLISH
JAPAN
FRENCH
SPANISH
FORTUGUESE
LATIN
GERMAN
EXIT SETUP
Note:
CHINESE
ENGLISH
JAPAN
FRENCH
SPANISH
FORTUGUESE
FRENCH
LATIN
The language will be the disc default
language if the language you want is
not visible
Default language: English
44
10
TROUBLE SHOOTING
Trouble shooting
Please refer the following instruction when there are some problem with this unit. If the
problem still exit, please consult your nearest service center.
PROBLEM
POSSIBLE REASON
Disc error
Disc can not play
No picture in TV
Speaker no sound
No sound in TV
or amplifier
Disc dirty or scratch
SOLUTION
Place disc in right direction
Using good disc
Area code error
Using right area code disc
Cable loosen
Setting error
Earphone in use
Cable loosen
Insert the cable again
Set TV or this unit correctly
Removing earphone
Insert the cable again
Connecting cable error Connecting cable correctly
Different volume Disc recording in
for DVD/CD disc different way
Adjust volume level
45
-
EN-V0.1-
11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement