UPS DELPHYS MX
Three-phase
UPS
DELPHYS MX
from 250 to 500 kVA
your MaXi protection up to 3 000 kVA
High quality power supply
• High quality output voltage and frequency
thanks to fast digital SVM control (Space
Vector Modulation) on-line double conversion.
• Perfect sinusoidal output, even with nonlinear loads, for optimum equipment
performance (Crest Factor 3:1).
High reliability and availability
• Fault tolerant architecture with built-in
redundancy.
• A choice of parallel redundant configurations.
• A global solution providing redundancy in
close proximity to applications: UPS and
Static Transfer Systems.
More power for latest-generation
leading IT loads
Easy integration into your electrical
network: DELPHYS MX elite
The DELPHYS MX elite range is designed to
supply latest-generation leading servers
without over rating the UPS power.
12% more active power for the latest
generation of servers.
The 0.9 rated output leading to lagging
power factor responds perfectly to computer
system high power factor load requirements.
Capability to power leading and lagging
loads without derating.
• “Clean input” rectifier absorbing sinusoidal
current without filter to keep your supply
network clean.
• Reduced current consumption due to highlevel input power factor: 0.93 constant.
• Fully compatible with generating sets, without
generator oversizing.
Protecting your battery investment
• An innovative battery charging mode for
increased battery lifetime.
• An advanced monitoring system, capable of
locating and correcting problems interacting
with the charger, so you can be sure your
back-up will always be available.
Cost effective equipment
• Compact with smaller footprint.
• DELPHYS MX elite has a built-in rectifier,
considerably reducing your infrastructure
costs (generator and distribution).
• Exceptional efficiency and the ENERGY
SAVER function in on-line mode and keep
the redundancy required.
User-friendly operation
• Specially designed graphic touch screen for
easy and ergonomic operation.
• An array of “com-slot” plug-in communication
interfaces, for upgrading your operating
requirements.
Remote monitoring
DEFYS 112 C 1 CAT
• Easy remote monitoring via web browser or
via customer’s supervision systems (web,
intranet, extranet...).
• Very open connectivity (Modbus/Jbus,
Jbus tunnelling, LAN...).
Your protection
for
> Data centre
> Industry
> Telecommunications
> Processes
1
Three-phase
UPS
DELPHYS MX
from 250 to 500 kVA
The voltage you require: whatever the load
LEADING
cos ϕ 0,9
LAGGING
kW
100% kW cos ϕ 1
cos ϕ 0,9
1
DEFYS 153 A GB
0,75
0,50
Without derating
vaA
kV
Components and power bridges (integrating
the latest high performance IGBT) enable the
supply:
• non-linear loads with high crest factor up to 3,
• capability to power leading and lagging loads
without derating.
0%
10
DELPHYS MX elite ensures your power
supply is of the utmost quality by using SVM
(Space Vector Modulation) digital regulation:
• perfectly sinusoidal output voltage THDV
< 2% with linear loads and < 3% with nonlinear loads,
• output voltage precision even when load is
completely unbalanced between phases,
• an immediate response to major variations
in load, without deviating the output
voltage (± 2% in less than 5 ms),
• a very high short circuit capacity up to 4 In
(Ph / N) allows selectivity.
0,25
-1
-0,8
-0,6
-0,4
-0,2
0
0,2
0,4
0,6
0,8
1
kVAr
Integration into your electrical network: a “clean” and economical rectifier
• gradual, sequential start-up of the rectifiers
in parallel, facilitating take up by the
generating set,
• delayed battery recharge when running
on generating set to reduce power
consumption.
THDI %
30 %
28 %
25 %
20 %
15 %
10 %
2
7%
3,2 %
1%
Fault tolerant architecture
Protecting your battery investment
EBS (Expert Battery System) technology
significantly prolongs the battery life:
• charge according to an algorithm which
adapts to the environmental conditions
and the condition of the battery,
• eliminates overloading effects due to
permanent floating, which accelerates the
corrosion of the positive plates and causes
the separators to dry out,
• isolation of the DC battery bus,
(independent charger function). Premature
ageing, caused by residual ripple from the
inverter bridge is eliminated.
Guaranteed battery availability
• the battery and DC circuit are regularly and
automatically tested and the operator is
notified of their condition,
• the optional BHC (Battery Health Check)
function tests and analyses the following
parameters: current supplied by branch
and voltage of each segment or each
block. In the event of a problem, the
function automatically takes corrective
measures, if the problem continues, an
alarm showing the location of the fault
(branch, segment or block) allows
maintenance to be easily organised.
DEFYS 092 A 1 CAT
DELPHYS MX elite
integrates
internal
redundancy that ensures permanent power
supply even during system failure:
• redundant ventilation system,
• ring bus synchronisation,
• no single point of failure since the
synchronisation bus uses a fault tolerant
token ring topology that accepts an
accidental opening of the synchronisation
loop, without UPS malfunctioning or load
losses and an alarm is given to the operator
at the first fault.
• “Cascade failure” protection function
eliminates fault propagation downstream
of a module in parallel system when
configured with central bypass
• internal or external “backfeed” protection
eliminates any risk of energy feedback
upstream of the UPS,
• Hardware and software watchdog ensures
that the power supplied to applications is
secure in case of a circuit and control
software fault,
• redundancy of the power supplied to the
electronics, locating ventilation faults,
preventive detection of faults on a battery
component on request.
9%
8%
5%
DEFYS 096 B GB
DELPHYS MX elite,
guarantees
total
compatibility with your low voltage electrical
power supply system and, in particular, with
generating sets:
• sinusoidal current at rectifier THDI input:
4.5 % without filter,
• increased power factor upstream of the
rectifier: 0.93 without filter, reducing the
current consumed, and therefore the size of
cables and protective devices,
6%
5%
4,7 %
2,5 %
2%
0%
H5
H7
H11
H13
Traditional three-phase rectifier with thyristor
12 pulse rectifier
Low distortion rectifier DELPHYS MX elite
H17
H19
HARMONICS
Three-phase
UPS
DELPHYS MX
from 250 to 500 kVA
Parallel architectures
• DELPHYS MX elite redundant bypass,
for greater availability.
To fulfil the most demanding needs for power
supply availability, for flexibility and for the
installation to be upgradeable.
• DELPHYS MX elite with Static Transfer
Systems:IT SWITCH and LTM to provide
security as close to the applications as
possible.
• DELPHYS MX elite modular,
growth without limits.
ACS
DEFYS 065 A
DELPHYS
MX elite
ACS
DEFYS 093 A
• DELPHYS MX elite double bypass,
for easier operation.
DELPHYS
MX elite
• DELPHYS MX elite centralised bypass,
programmed growth.
LTM 1
LTM 2
Load 2
• DELPHYS MX elite multi bypass,
to separate application types.
DEFYS 095 B GB
DEFYS 094 A
DEFYS 059 B
Load 1
IT-SWITCH
Load 3
Standard equipment
DEFYS 026A
• Slots for 7 communication cards.
• Backfeed protection: detection circuit.
• Standard interface
- 3 inputs (emergency stop, generating
set, battery protection)
- 4 outputs (general alarm, back-up,
bypass, preventive maintenance needs).
• EBS (Expert Battery System).
Graphic display
Design adapted to the user: control panel with LEDs and LCD display.
Accessories
DEFYS 111 A GB
• BHC battery unit monitoring.
• Graphic touch screen.
• ACS function for synchronisation with an
external source.
• Reinforced IP protection degree.
• Ventilation filters.
• Ventilation control.
Communication options
Graphic touch screen (GTS)
The operator has access to the control functions with only a few intuitive touches of the
screen.
Operating mode
icons
Direct access zones
to sub-unit menus
Help menu for
correct operation
UPS load rate
(bar graph)
Status bar
DEFYS 102 A
Quick access to each
installation module
• Remote access panel.
• ADC (Advanced Dry Contacts) data input
and output by dry contacts.
• RS232, RS422, RS485 serial connection
JBUS/MODBUS, PROFIBUS or DEVICENET
protocol.
• MODBUS TCP interface (JBUS / MODBUS
tunneling).
• NET VISION interface for LAN Ethernet
network.
• GSM modem for SMS alerts.
Access to installation
mimic panel
Remote maintenance
Preventive
maintenance request
• TELESERVICE for continuous monitoring
via the SOCOMEC UPS maintenance
service.
3
Three-phase
UPS
DELPHYS MX
from 250 to 500 kVA
UPS and batteries
A compact and integrated system.
Battery for back-up time
10 minutes
W
mm
2400
2400
3200
3200
15 minutes
Weight
kg
3670
3670
4890
5560
W
mm
2400
3200
4000
4800
Weight
kg
3770
4600
6110
7115
1930
UPS power
kVA
250
300
400
500
DELPHYS MX DELPHYS MX
elite
Weight
Weight
kg
kg
1650
2210
1700
2260
1800
2450
2900
DEFYS 085 B GB
UPS
W
16
Common cabinet
W
mm
600
600
1000
1000
1300
2600
95
0
Double conversion architecture
For parallel systems with central bypass.
Power(1)
kVA
300
400
600
800
1200
2000
00
D
mm
800
800
800
800
800
1200
Maintenance
Bypass
Weight
kg
270
300
420
450
600
1800
Q5
Automatic
Bypass
Q4
Inverter
Rectifier
(1) For other power ranges, please consult us.
Q1
Q3
Charger
DEFYS 088 A GB
Q20
1930
Battery
W
D
Bypass transformer
For galvanic isolation.
Power(1)
kVA
300
400
500
600
800
1000
1200
W
mm
1000
1200
1200
1200
1200
1200
1600
Weight
kg
800
1000
1500
1800
2000
2500
2700
DEFYS 087 A GB
1930
(1) For other power ranges, please consult us.
W
80
0
Sn [kVA]
Pn [kW] (elite version, output PF: 0.9)
Pn [kW] (base version, output PF: 0.8)
RECTIFIER INPUT
Voltage
Acceptable tolerance
Frequency
Power factor
DELPHYS MX elite current distortion rate
OUTPUT
Voltage (configurable)
Tolerance
In static load conditions
In dynamic load conditions from 0 to 100%
Voltage distortion rate
with non-linear loads according to EN/IEC 62040-3
250
225
200
< 1%
± 2% in 5 ms
Ph/N: < 3%
Ph/Ph: < 2.5%
3:1
lag. to 0.9 lead.
50 - 60 Hz
± 0.2%
1 min: 150%
10 min: 125%
94%
98%
72 dBA
IEC62040-1-2/IEC60950
IEC62040-2
IEC62040-3
Voltage Frequency Independent, on-line double conversion VFI - SS - 111
VALID FOR FRANCE
Non contractual document. © 2009, Socomec SA.
All rights reserved.
www.socomec.com
500
450
-
three-phase + N 380 V - 400 V - 415 V (1)
(1) Three-phase 220-230-240 V on demand. - (2) As per power range.
4
400
360
320
three-phase 380 V - 400 V - 415 V (1)
340 to 460 V
50 - 60 Hz (45 to 65 Hz)
0.93 constant
THDI: 4.5% without filter
Acceptable crest factor without de-rating
PF acceptable without de-rating
Frequency (configurable)
Autonomous frequency tolerance
Overload
Efficiency
Global (2)
In ECO-MODE configuration
ENVIRONMENT
Noise level (ISO 3746) (2)
Compliance to standards
Safety
EMC
Technical data
Classification according to IEC62040-3
300
270
240
VALID FOR ITALY
ISO 9001: 2000
FM 28237
DOC 111013 - 06/09 - Réalisation : SOCOMEC Service Communication
DEFYS 086 A GB
Technical data
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement