Kenroy Home 32445BZC Assembly Instructions

 MODEL: 32445B7C
PACKING DIAGRAM
FINIAL, HARP &
RUBBER WASHER} |
dy
SHADE
—SOCKET ASSEMBLY
\ ee V
—~+-—— CARDBOARD
|
/
STYROFOAM: 12 —
MP BODY
SIYROFOAM: 12 KGS.— — >
ASSEMBLY INSTRUCTIONS
O- FINIAL READ AND SAVE THESE INSTRUCTIONS
READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO
_ RUBBER ASSEMBLY.
WASHER
THIS LAMP SHOULD TAKE APPROXIMATELY 5 MINUTES TO
ASSEMBLE.
MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED.
UNPACK THE LAMP
YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE
PACKAGE: FINIAL, RUBBER WASHER, SHADE, HARP, SOCKET
ASSEMBLY AND LAMP BODY. TO PROTECT THE FINISH, PLACE
| ALL PARTS ON A SOFT SURFACE.
ASSEMBLE THE LAMP
SHADE 1. CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A
SMOOTH, FLAT SURFACE. LINE UP ALL OF THE PARTS
(REPLACEMENT ACCORDING TO THE ASSEMBLY DIAGRAM.
PART) 2. PULL THE EXCESS POWER CORD THROUGH BASE.
HARP 3. SCREW SOCKET ASSEMBLY TO TOP OF LAMP BODY.
LWHARP—8—PB
(REPLACEMENT 4. SQUEEZE LEGS OF THE HARP TOGETHER AND INSERT THE
PART) TWO ENDS BETWEEN THE PRONGS OF THE HARP HOLDER.
5. PLACE SHADE ONTO HARP, THEN SECURE WITH RUBBER
WASHER AND FINIAL.
—SOCKET 6. INSTALL A 150 WATT MAXIMUM MEDIUM BASE TYPE “A”
SWITCH 3—WAY BULB (NOT INCLUDED) INTO SOCKET.
SOCKET ARP HOLDER 7. PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT
ASSEMBLY SWITCH.
BULB REPLACEMENT
1. BEFORE REPLACING THE BULB, BE SURE THAT THE SHADE
AND BULB ARE COOL AND LAMP IS UNPLUGGED.
2. UNSCREW EXISTING BULB FROM SOCKET AND REPLACE
WITH A NEW BULB. PLUG POWER SUPPLY CORD BACK INTO
OUTLET.
TROUBLE SHOOTING
LAMP 1. IF YOUR LAMP DOES NOT LIGHT, CHECK PLUG AT THE
BODY OUTLET. MAKE SURE THE PLUG IS FULLY AND PROPERLY
INSERTED INTO THE POWER OUTLET.
2. IF LAMP STILL DOES NOT LIGHT, UNPLUG FROM OUTLET.
CORD CHECK THE BULB FOR A BROKEN FILAMENT. REPLACE BULB IF
NECESSARY, PLUG IN LAMP AND TURN IT ON.
3. IF THE LAMP STILL DOES NOT LIGHT, PLEASE CONTACT
y > o“ YOUR DISTRIBUTOR OR PLACE OF PURCHASE.
|
IMPORTANT SAFETY INSTRUCTIONS
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS
AVAILABLE PARTS ARE: WIDER THAN THE OTHER) AS A FEATURE TO REDUCE THE
LWHARP—8—PB (HARP) RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A
32445SHBZC (SHADE) POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT
FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL
DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. NEVER USE
WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY
INSERTED. DO NOT ALTER THE PLUG.
11/2013 32445B7ZC INSTRUCTIONS