The great outdoors by Minka Lavery | 8764-166 | Installation guide | the great outdoors by Minka Lavery 8764-166 Installation Guide

INSTALLATION INSTRUCTIONS
For Model 8764
WARNING!
S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .
HANGING THE FIXTURE (Fig. 1)
Fig. 1
1. Shut off the power at the circuit breaker and remove old fixture,
including the crossbar.
2. Carefully unpack your new fixture and lay out all the parts on a
clear area. Take care not to lose any small parts necessary for
installation.
3. Thread the 2 Mounting Screws
(B) to the Cross Bar(C), and
then secure with 2 Lock Nuts.(You can adjust the length of the
screws if necessary.)
4. Attach the Cross Bar(C)
to the Outlet Box (A)(not supplied
using the 2 screws provided with the Outlet Box(B).
5. Install bulbs. (Type-B. not supplied)
6. Attach cover (D) to the Fixture using the 2 Screws (E)
7. Turn on the power at fuse or circuit box.
CONNECTING THE WIRES (Fig. 2)
1. At this point, connect the electrical wires as follows:
Connect the black wire from the fixture to the black (hot) house
wire. Connect the white wire from the fixture to the white (neutral)
house wire. Make sure all wire nuts are secured. You may wrap
the connections with electrical tape. If your outlet has a ground
wire (green or bare copper), connect fixture’s ground wire to it.
Otherwise, connect fixture’s ground wire directly to the crossbar
Fig. 2
FIXTURE
WIRES
Black or
Smooth
FIXTURE
WIRES
White or
Ribbed
FIXTURE
WIRES
Bare
Copper
(Ground)
using the green screw provided. Tuck the wire connections neatly
into the ceiling junction box.
DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
Your installation is now complete. Return power to the junction
box and test the fixture.
MIN 90 ゚ C SUPPLY CONDUCTOR
HOUSE
WIRES
Black
(Hot)
HOUSE
WIRES
White
(Neutral)
HOUSE
WIRES
Green or
Bare
Copper(Gr
ound)
Download PDF