The great outdoors by Minka Lavery | 9066-66 | Instructions / Assembly | the great outdoors by Minka Lavery 9066-66 Instructions / Assembly

INSTALLATION INSTRUCTIONS
For Model: 9066
WARNING!
S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .
HANGING THE FIXTURE (Fig. 1)
Fig.1
1. Shut off the power at the circuit breaker and remove old fixture.
2. Carefully unpack your new fixture and lay out all the parts on a
clear area. Take care not to lose any small parts necessary for
installation.
3. Attach the Finial (A) to the Cover (E) and Secure with the net (D),
Nipple (B) and washer (C)
4. Place the Fixture(C) to the post (I), and then secure with the 3
Mounting screws (H)
5. Install bulb. (A-19 medium base, not supplied.)
6. Attach the cover (A) to the Fixture by using the 2 Screws (F)
CONNECTING THE WIRES (Fig. 2)
At the point, connect the electrical wires as follows:
Connect the black wire from the fixture to the black house (hot)
wire. Connect the white wire from the fixture to the white (neutral)
house wire. Make sure all wire nuts are secured. You may wrap
the connections with electrical tape. If your outlet has a ground
wire (green or bare copper), connect fixture’s ground wire to it.
Otherwise, connect fixture’s ground wire directly to the crossbar
using the green screw provided. Tuck the wire connections neatly
into the ceiling junction box.
. DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
Fig. 2
FIXTURE
WIRES
Black or
Smooth
FIXTURE
WIRES
White or
Ribbed
FIXTURE
WIRES
Bare
Copper
(Ground)
Your installation is now complete. Return power to the junction
box and test the fixture.
MIN 90°C SUPPLY CONDUCTOR
HOUSE
WIRES
Black
(Hot)
HOUSE
WIRES
White
(Neutral)
HOUSE
WIRES
Green or
Bare
Copper(Gr
ound)
Download PDF