Airtel 4G Hotspot User Manual

Below you will find brief information for 4G Hotspot. The Airtel 4G Hotspot is a mobile Wi-Fi device that lets you share your 4G data connection with up to 15 devices. This manual will guide you to configure the device.

PDF
Document
Airtel 4G Hotspot User Manual | Manualzz

Advertisement

Advertisement

/

Advertisement

Key features

  • Share 4G data with up to 15 devices

  • Connect to 4G/3G/2G networks

  • Web UI for configuration

  • SMS support

  • LED indicators for network status, Wi-Fi, battery

  • Battery charging via wall charger or USB cable

  • WPS for easy connection

  • Online updates for software

  • USSD code support

  • Diagnostic tools

Frequently asked questions

Open your wireless network connection list and select the relative SSID. You can find instructions for Windows, Mac, iOS, and Android devices in the manual.

Check the password you entered is the right one. Check if WPS security is enabled on your PC? If so, check the device to see if it is expecting a WPS action from your PC.

The possible reason are listed as bellow: Unstable local signal, Hardware problem. You may: Change the position or location of the device. Check the hardware or use another device and retry.

The SIM card is locked. Log into the Web page and Enter your PIN code or PUK code you got from the operator. Note: If you entered wrong PIN 3 times, then PUK is needed, and if the wrong PUK entered 10 times, the SIM card will be locked forever.

Login the web browser, go to Connection click “Connect/Disconnect” button.

Log into the web browser, Go to Settings->PIN Code Management.

Log into the web browser, Go to Connection.

Log into the web browser, Go to Usage.

Log into the web browser, Go to Settings->Network mode, choose manual for network selection.

Log into the web browser, go to Settings->About.

Log into the web browser, go to Settings->About.

Log into the web browser, and go to Settings->Network mode->AUTO.

Log into the web browser, and go to Settings->Wi-Fi settings.

Log into the web browser, and go to Settings->Login settings.

Log into the web browser, and go to Settings->Wi-Fi settings.

User questions

L Y

Jennifer L.

How to access the Mifi's web interface?

Open a web browser on a device connected to the Mifi's Wi-Fi network and enter the IP address of the Mifi into the address bar. The default IP address is usually 192.168.1.1. You'll be prompted to enter the username and password for the web interface. The default username and password are usually "admin".

L Y

Jennifer L.

What settings can be managed using the Mifi's web interface?

The web interface allows you to manage settings such as the Wi-Fi network name and password, data usage limits, and connected devices.

Preparing document for printing…
0%