Laura Ashley | HFRY0363 | Use and Care Manual | Laura Ashley HFRY0363 Use and Care Manual

Assembly Instructions
Freya Chandelier # HFRY0363
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.
1. Attach the nipple to the mounting strap, then secure it
with a washer and hex nut.
2. Attach the mounting strap to the outlet box by using
two mounting screws.
3. Choose the length of the chain you need, then weave
the fixture wire and the fixture grounding wire through
the chain. Then connect one end of the chain with the
loop by using the loop lock.
4. Secure the top loop to the nipple tightly.
5. Thread the fixture wire and fixture grounding wire through
the collar, canopy, top loop, nipple and mounting strap.
6. Connect the other end of the chain with the top loop by
using the loop lock.
7. Pull out the outlet wires and house grounding wire
from the outlet box. Make wire connections with wire
nuts:
---The smooth wire (marked) from the fixture to the
black wire from the power source.
---The ridged wire (unmarked) from the fixture to the
white wire from the power source.
---Attach the fixture grounding wire to the mounting
strap with the green grounding screw. Then connect
it to the house grounding wire with the wire nut.
Carefully put the wires back into the outlet box.
8. Attach the canopy to the mounting strap by inserting
the top loop, then secure it with the collar.
9. Attach the candle tubes onto the sockets. Then install
bulbs (not included). See relamping label at socket
area or packaging for maximum allowed wattage.
10. Turn on the power at the main fuse or circuit breaker
box.
Outlet Box
House Grounding Wire
Wire Nut
Hex Nut
Washer
Mounting Strap
Green Grounding Screw
Mounting Screw
Nipple
Canopy
Top Loop
Collar
Loop Lock
Fixture Grounding
Wire
Chain
Loop Lock
Fixture Wire
Loop
Fixture
Socket
Candle Tube
Download PDF