Global Direct | 21828 | Installation guide | Global Direct 21828 Installation Guide

STYLE NO:21828
Part and Hardware List
Chandelier Assembly
A.
1PC
B.
1PC
Glass
C.
Cross Bar
1PC
D.
Outlet box screws
2PCS
Pre-Threaded Pipe
E.
1PC
F.
Hex Nut
1PC
G.
Pre-Threaded Ring
1PC
H.
Collar loop
1PC
I.
Canopy
1PC
J.
Wire Nut
2PCS
K.
Chain
1PC
L
Quick Link
2PCS
Please make sure that you have all the parts indicated before you
begin assembly of this item.
Please read Wiring Instructions before you begin assembly and
installing your Chandelier.
WARNING : BEFORE INSTALLING Make sure electricity supply is
shut off to avoid a possible electric shock.
Assembly Instructions
1.Carefully remove the parts and hardware from the carton.
2.Fasten the Cross Bar(C)to the outlex box using the Outlet box Screws(D).
3.Insert the shorter end of the Pre-Threaded Pipe(E)into the pre-drilled hole in the Cross
Bar(C)and secure with the Hex Nut(F).See Illustration.
4.Attach the Collar loop (H)to the exposed end of the Pre-Threaded Pipe(E)and secure
by turning in a clockwise direction.
5.Slip the Pre-Threaded Ring(G)first and then the Canopy(I)over the other end of the
Chain(K),
6. Attach the Quick Link (L) to two bitter end of the Chain (K).
7 Attach the Quick Link on one end of the Chain to Collar loop(H).
8.Attach the Quick Link(L)on other end of the chain (K) to the loop of the chandelier
Assembly.
9.Lace the wire through every link of the chain,through the collar and up through the
Pre-Threaded Pipe(E).See Illustration.
10.Place the white,ribbed or tinted wire evenly against the white wire from the outlex
box and place the black,smooth or un-tinted wire evenly against the black wire from the
outlet box.(Connecting the Wire -See Figure2)
11. Install the ground wire in the Cross Bar with the green screw supplied.
12.After the wires are connected,tuck them carefully inside the outlet box.Place
Canopy(I)over the outlet box and secure with Pre-Threaded Ring(G).
13.Attach the Glass(B)onto the socket of Chandelier Assembly(A)and secure by turning
in a clockwise direction.See Illustration.
14.Install 100 Watt,Type A bulbs(sold separately)into the sockets of the fixture.
Figure 3
(Diagramme 3)
Download PDF