FH16 42R Low full air FH 42R B6LC1

FH16 42R Low full air FH 42R B6LC1
Volvo Trucks. Driving Progress
FH16 42R Low full air FH 42R B6LC1
3101
,4
Cab 2495
Chassis Dimensions [mm]
WB Wheelbase
5200
5600
A
D
N
N
Overall Chassis Length
Centre of rear axle to front of body
Rear Overhang (Min)
Rear Overhang (Max)
9455 10055 10655 11555
4190 4590 4990 5490
1395 1395 1395 1395
2895 3095 3295 3695
Y
Y
W
W
Centre of Gravity for Payload (Min)
Centre of Gravity for Payload (Max)
Body Length (Min)
Body Length (Max)
772
772
6837
6837
826
826
7528
7528
6000
875
875
8230
8230
6500
927
927
9127
9127
Chassis Weights [kg]
Front Axle
Rear Axle
Kerb Weight
Payload (including body, driver, fuel etc)
5220 5240 5265 5360
2200 2235 2265 2545
7420 7475 7530 7905
12680 12625 12570 12195
Turning Diameter [mm]
Turning Circle Diameter Kerb to Kerb
Turning Circle Diameter Wall to Wall
18000 19200 20400 22000
19400 20600 21800 23300
Plated Weights [kg]
Design
Gross Vehicle Weight
Gross Combination Weight
Front Axle
Rear Axle
20100
44000
7100
13000
Important Notes
Chassis Dimensions
Cab Height: +404 mm for L2H2, +542 mm for L2H3.
D-measure includes a front clearance of 50 mm and for rigid trucks also a
subframe of 100 mm.
Height can vary ± 20 mm for leaf and ± 10 mm for air suspension.
All dimensions are for unladen chassis and any tag axles down.
Rear overhang used for vehicle weight calculation is the maximum rear
overhang (N Max) for selected wheelbase.
Weight and dimensions are based upon the following tyres:
Front Axle Tyres:
315/70R22.5
Drive Axle Tyres:
295/60R22.5
Chassis weight includes oil, water, AdBlue, 70 litres fuel and without driver.
Kerb weight can vary ± 1.5%.
Turning diameters are theoretically calculated.
Legal weights can differ from country to country.
For more detailed weight information, including optional equipment weights,
ask your Volvo sales contact to enter your specification into the Volvo Weight
Information system (WIS).
Do NOT use this drawing for bodybuilding. Refer to Volvo Bodybuilder
Instructions and chassis assembly drawing 3199893.
1 (6)
Ref: FH 42R B6LC101 8EE 2013-09-14 ENGVT
FH16 42R Low full air FH 42R B6LC1
Core components
□ FUELECO1
Fuel economy package
■ RAD-A4
Rear air suspension, 1 axle - 1 driven
■ L2H1
□ L2H2
□ L2H3
Sleeper cab
Sleeper cab with high roof, Globetrotter
Sleeper cab with extra high roof (+140 mm), Globetrotter XL
(FH) / LXL (FM) cabs
□ DRIVE
□ DRIVE+
Driving package FH
Driving plus package FH
■ EU3
□ EU4SCR
□ EU5EEV
Euro 3 engine emission level
Euro 4 emission level with Selective Catalytic Reduction (SCR)
Emission level Euro 5, Enhanced Environmental friendly
Vehicle (EEV)
Euro 5 mandatory emission level with Selective Catalytic
Reduction (SCR)
□
□
□
□
1 Bed resting package FH
1 Bed plus resting package FH
2 Bed resting package FH
2 Bed plus resting package FH
□ EU5SCR-M
□ EOBD-TR4
Emission monitoring (with display and possible 40% torque
reduction)
■
□
□
□
□
□
□
□
Diesel engine, 16 litre Euro 3, 550 hp, 2500 Nm
Diesel engine, 16 litre Euro 3, 610 hp, 2800 Nm
Diesel engine, 16 litre Euro 4, 580 hp, 2800 Nm
Diesel engine, 16 litre Euro 4, 660 hp, 3100 Nm
Diesel engine, 16 litre Euro 5 SCR, 540 hp, 2650 Nm
Diesel engine, 16 litre Euro 5 SCR, 600 hp, 2800 Nm
Diesel engine, 16 litre Euro 5 SCR, 700 hp, 3150 Nm
Diesel engine, 16 litre Euro 5 SCR, 750 hp, 3550 Nm
D16C550
D16C610
D16E580
D16E660
D16G540
D16G600
D16G700
D16G750
□ EBR-EPG
□ EBR-EPGC
□ EBR-VEB
□ EBR-VEB+
□ AT2812D
□ ATO3112D
□ ATO3512D
■ VT2814B
□ VTO2814B
□ TP-BAS
□ TP-DICON
□ TP-FUEC
□ AMSO-AUT
□ AMSO-BAS
□ AVO-BAS
□ AVO-ENH
1BED
1BED+
2BED
2BED+
□ AUDADV
□ AUDADVP
□ AUDBAS
□ AUDMED
Engine brake with exhaust pressure governor, EPG
Volvo engine compression brake with exhaust pressure
governor, EPG (for I-shift)
Volvo Engine Brake, VEB (compression brake with exhaust
pressure governor, EPG)
Volvo Engine Brake, VEB+ (high efficiency compression brake
with exhaust pressure governor, EPG)
Audio advanced: RDS radio with CD player (also playing
MP3/WMA files from CD), FM/AM antenna, speakers in
dashboard&doors&sleeping compartment (depending on cab),
integrated bluetooth phone, audio&phone steering wheel
switches, USB&Line inputs and audio remote control
Audio advanced power: RDS radio with CD player (also
playing MP3/WMA files from CD), FM/AM antenna, speakers in
dashboard&doors&sleeping compartment (depending on cab),
integrated bluetooth phone, audio&phone steering wheel
switches, USB&Line inputs, audio remote control, amplifier,
subwoofer and tweeters
Audio basic: RDS radio with CD player, FM/AM antenna and
speakers in dashboard&doors
Audio medium: RDS radio with CD player (also playing
MP3/WMA files from CD), FM/AM antenna, speakers in
dashboard&doors&sleeping compartment (depending on cab)
and audio steering wheel switches
□ VISI
□ VISI+
Visibility package
Visibility plus package
□ ASAFE
□ ASAFE+
Active safety package FH
Active safety plus package FH
Truck use
I-Shift automated mechanical 12-speed gearbox without clutch
pedal, max. engine torque 2800 Nm, max. permitted GCW
52000 kg
I-Shift automated mechanical 12-speed overdrive gearbox
without clutch pedal, max. engine torque 3150 Nm, max.
permitted GCW 60000 kg.
Suitable for hub reduction rear axles.
I-Shift automated mechanical 12-speed overdrive gearbox
without clutch pedal, 3550 Nm, GCW 60000 kg
Manual range & splitter 14-speed gearbox, max. engine torque
2800 Nm, max. permitted GCW 100000 kg
Manual range & splitter 14-speed overdrive gearbox, max.
engine torque 2800 Nm, max. permitted GCV 100000 kg
■ RC-SMOOT
Smooth road conditions
□ ADR1
□ ADR2
ADR adaptation, transportation of dangerous goods, 1 switch
ADR adaptation, transportation of dangerous goods, 2
switches
□ PSCOOL
Power steering cooler.
■ STWPOS-L
Left hand drive
I-shift City gear changing software
I-shift Distribution and Construction optimized gear changing
software
I-shift Long Haul & Fuel Economy gear changing software
I-shift manual gear shift available in automatic mode incl
kickdown function
Basic I-shift gear shifting without kickdown
Basic I-shift application software
Enhanced I-shift software for construction and off road
applications
Chassis
■ BRAKE-DV
Disc brakes
□ EBS-HIG
■ EBS-MED
EBS (Electronic Brake System) high package including ESP
(Electronic Stability Program)
EBS (Electronic Brake System) medium package (incl hill hold
function)
■ AUXPARK
Two extra parking brake chambers
■ ABS-EBS
Anti-lock/electronic brake system, EBS
■ SUSPL-EC
Air suspension levelling with electronic control
■ FRAME77
□ FRAME88
Frame section thickness 7 mm
Frame section thickness 8 mm
□ FIL-TXEF
Frame inner liner from transmission member to frame end
■ CD40B-O
□ CS43B-O
Double plate clutch, plate diameter 400 mm
Single plate clutch, plate diameter 430 mm
■ FRAMELOW Frame rail section external height 266 mm
■ BBOX-L
Battery box on left hand side
■ FAL7.1
□ FAL7.5
Front axle load 7.1 tonnes
Front axle load 7.5 tonnes
■ 2BATT225
Batteries 2x225 Ah
■ R315A56
Right 315 litre aluminium 560 mm high D-shaped fuel tank.
Usable volume is 97% of stated volume.
Min volume 255l
Max volume 885l
□ ADTR40
□ ADTR95
Plastic 40 litre right AdBlue tank
Stainless steel 95 litre right AdBlue tank
■ UL-FUEL
Without left diesel tank
Min volume 160l
Max volume 540l
□ ADTL40
□ ADTL95
Plastic 40 litre left AdBlue tank
Stainless steel 95 litre left AdBlue tank
■ FST-AIR
Front air suspension
■ FSTAB
Front stabilizer with normal stiffness
■ RS1356SV
□ RSS1360
Rear single reduction solo axle - axle load 13 tonnes, GCW 56
tonnes
Rear single reduction solo axle - axle load 13 tonnes, GCW 60
tonnes
■ RAL13
Rear axle load 13 tonnes
■ RSTAB1
Rear stabilizer with normal stiffness
Packages
■ Standard Equipment
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
2 (6)
Ref: FH 42R B6LC101 8EE 2013-09-14 ENGVT
FH16 42R Low full air FH 42R B6LC1
□ ADTP-M2R
Rims and Tyres
AdBlue tank on right hand side between diesel tank and big
silencer
AdBlue tank on left hand side between front circuit tank and
diesel tank
AdBlue tank on right hand side between silencer and diesel
tank
□ WL-AL
■ FCAP-L
Lockable diesel and AdBlue tank caps
□ WL-ALDU
■ FUFF-AS
□ FUFF-ATS
Fuel filling anti-spillage device
Fuel filling anti-theft and anti-spillage devices
■ WL-ST
Brushed aluminium rims with std holes (long stud fixing) on
front and drive axles
Dura-Bright aluminium rims with std holes (long stud fixing) for
front and drive axles
Dura-Bright aluminium rims with countersunk holes (short stud
fixing) on front and drive axles
Brushed aluminium rims with countersunk holes (short stud
fixing) on front and drive axles
Steel rims on front and drive axles
□
■
□
□
Horizontal muffler, left exhaust outlet
Horizontal muffler, rear exhaust outlet
Horizontal muffler, vertical exhaust outlet on right hand side
Vertical muffler, vertical exhaust outlet on right hand side
□ SPWT-D
■ SPWT-F
Spare wheel with tyre equal to drive
Spare wheel with tyre equal to front wheel
□ WCAP
Wheel caps
□ ADTP-ML
□ ADTP-MR
ESH-LEFT
ESH-REAR
ESH-VERT
ESV-VERT
■ SWCP-LF
□ SWCP-R
□ SWCP-T
□ SWCP-TP
□ WL-ALDP
□ WL-ALDPD
Spare wheel carrier on left side in front of rear axle
Spare wheel carrier mounted behind rear axle and below frame
Temporary spare wheel carrier.
Spare wheel is transport mounted (strapped on top of the
frame rails) with plastic stips.
Spare wheel carrier transport mounted with the spare wheel on
top of the frame rails
□ WHCHOCK1 One foldable wheel chock
□ WHCHOCK2 Two foldable wheel chocks
□ TB-R80
Right toolbox 800 mm length (mounting length 800 mm, real
length 730 mm)
□ SUP-BAS
Standard side underrun protection
□ MARKL-R
■ MARKL-SR
Rear marker lights and side reflectors
Side and rear marker lights
□ CHAIN-S
Snow chains
□ HOOK-SC
Snow chain hooks.
Rear mounted for tractors and side mounted in rear overhang
for rigids. Two hooks on each side.
□ RFEC-L
■ RFEC-S
□ RFEC-U
Rear frame end, lower cut (for centre axle drawbar)
Rear frame end, straight cut (for regular platform applications)
Rear frame end, upper cut (for e.g. tipper, refuse and hooklift
applications)
□ TOWMBRH High mounted towing member, in centre of frame
□ TOWMBRL1 Towing member, low mounted under the frame (position 1)
□ TOWMBRL2 Towing member, low and forward mounted under the frame
(position 2).
□ TOWMBRL3 Towing member, low and far forward mounted under the frame
(position 3)
□ TOWMBRM Towing member, medium mounted in line with frame lower
flange.
□
□
□
□
□
□
□
C-RI4040
C-RI4045
C-RI5055
C-RO400G
C-RO500G
C-VBG750
C-VBG850
Towing coupling Ringfeder 4040 G-150
Towing coupling Ringfeder 4045 G-150
Towing coupling Ringfeder 5055 G-150
Towing coupling Rockinger 400 G-150
Towing coupling Rockinger 500 G6
Towing coupling VBG 750V
Towing coupling VBG 8500
Powertrain equipment
□ RET-TH
Retarder for manual and I-shift gearboxes
■ 2COM1080
□ 2COMP900
Dual cylinder air compressor 704 cc / 1080 l/min
Dual cylinder air compressor 636 cc
■ AIRIN-HI
□ AIRIN-LO
High air intake
Low air intake
□ ACL1ST-S
Air cleaner with additional filter element
□
□
■
□
Alternator 120 Ampere
Alternator 150 Ampere
Alternator 80 Ampere (D13/16) / 90 Ampere (D11)
Alternator 110 Ampere
24AL120B
24AL150B
24ALT-HB
24ALT-XB
□ CCV-C
□ CCV-OX
Closed crankcase ventilation
Closed crankcase ventilation with oil separator and a
maintenance free gas centrifuge
■ COOLC40
□ COOLC48
Cooling capacity 40°C, ATB
Cooling capacity 48º C, ATB
□ TC-MAOH2
Extra high performance oil cooler for mechanical transmissions
- air/oil
Basic performance oil cooler for mechanical transmissions water/oil
High performance oil cooler for mechanical transmissions water/oil
Oil cooler for mechanical transmissions with retarder
(integrated in the retarder heat exchanger) – water/oil
□ TC-MWO
□ TC-MWOH2
□ TC-RWO
■ AF-E
Auxiliary fuel filter, electrically heated
■ EST-AID
Engine start pre-heating element
□ PTER-DIN
Rear engine mounted clutch independent PTO with DIN5462
(female) splined shaft for a close coupled pump
Rear engine mounted clutch independent PTO with SAE 1410
flange
□ PTER1400
□ HPE-F101
□ HPE-F41
□ HPE-F51
□ HPE-F61
□ TOWR-ONE
One rear towing device in frame end cross member
□ RUP-FIX2
□ RUP-FOLD
Fixed aluminium rear underrun protection (EC approved)
Foldable aluminium rear underrun protection (EC approved)
□ MTD-RUP
□ TRP-RUP
Factory mounted rear underrun protection
Transport mounted rear underrun protection
□ RFEND-B
■ RFEND-T
Rear 3 piece fenders (all rear axles)
Transport mounted one-piece rear fenders
□ HPE-V45
□ RFH-BAS
Optimal fender installation (rear and 2nd front axle) with regard
to legal demands, wheel/tyre sizes, chassis heights and fifth
wheel heights.
Highest fender installation (rear and 2nd front axle).
Suitable for rough and very rough road conditions.
Lower fender installation (rear and 2nd front axle).
Suitable only for smooth road conditions.
□ HPE-V75
□ RFH-HIG
□ RFH-LOW
■ Standard Equipment
□ HPE-F81
□ HPE-T53
□ HPE-T70
□ PTR-D
□ PTR-DH
□ PTR-DM
Rear engine mounted hydraulic pump F1-101, fixed
displacement, single flow
Rear engine mounted hydraulic pump F1-41, fixed
displacement, single flow
Rear engine mounted hydraulic pump F1-51, fixed
displacement, single flow
Rear engine mounted hydraulic pump F1-61, fixed
displacement, single flow
Rear engine mounted hydraulic pump F1-81, fixed
displacement, single flow
Rear engine mounted hydraulic pump F2-53/53, fixed
displacement, twin flow
Rear engine mounted hydraulic pump F2-70/35, fixed
displacement, twin flow
Rear engine mounted hydraulic pump VP1-45, variable
displacement, single flow
Rear engine mounted hydraulic pump VP1-75, variable
displacement, single flow
Mechanical gearbox driven low speed power take-off, 1 rear
DIN connection for plug-in pump (max. 1000 Nm)
Mechanical gearbox driven high speed power take-off, 1 rear
DIN connection for plug-in pump (max. 600 Nm)
Mechanical gearbox driven medium speed power take-off, 1
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
3 (6)
Ref: FH 42R B6LC101 8EE 2013-09-14 ENGVT
FH16 42R Low full air FH 42R B6LC1
□ PTR-F
□ PTR-FH
□ PTR-FL
□ PTRD-D
□ PTRD-D1
□ PTRD-D2
□ PTRD-F
rear DIN connection for plug-in pump (max. 600 Nm)
Mechanical gearbox driven low speed power take-off, 1 rear
SAE flange connection for propeller shaft (max. 1000 Nm)
Mechanical gearbox driven high speed power take-off, 1 rear
SAE flange connection for propeller shaft (max. 600 Nm)
Mechanical gearbox driven low speed power take-off, 1 rear
SAE flange connection for propeller shaft (max. 600 Nm)
Mechanical gearbox driven high speed power take-off, 1 rear
DIN/1 front DIN connections for plug-in pumps (max. 730 Nm)
Mechanical gearbox driven high speed power take-off, 1 rear
SAE flange connection for propeller shaft/1 front DIN
connection for plug-in pump (max. 730 Nm)
Mechanical gearbox driven power take-off, 2 rear SAE flange
(high-low speed) connections for propeller shafts/1 front DIN
(high speed) connection for plug-in pump (max. 730/1000 Nm)
Mechanical gearbox driven high speed power take-off, 1 rear
SAE flange connection for propeller shaft (max. 730 Nm)
□ SBPRE-PS
Passenger seat belt pretensioner
□ BUNK-R
□ BUNK-RT
One recline bunk, 760 x 2000 mm
Two bunks, lower recline 760 x 2000 mm / upper 600 x 1900
mm
Two bunks, lower recline 760 x 2000 mm / upper comfort 700 x
1900 mm
One bunk, 700 x 2000 mm
Two bunks, lower 700 x 2000 mm / upper comfort 700 x 1900
mm
One bunk, 760 x 2000 mm
Two bunks, lower 760 x 2000 mm / upper 600 x 1900 mm
Two bunks, lower 760 x 2000 mm / upper comfort 700 x 1900
mm
□ BUNK-RTC
□ BUNK70
□ BUNK70TC
■ BUNK76
□ BUNK76T
□ BUNK76TC
□ HINGE-AD
□ HINGE-FI
Sliding upper bunk
Fixed upper bunk
□ APF-BAS
□ APF-ENH
Basic I-shift PTO functions
Enhanced I-shift PTO functions (Auto Neutral / Reverse Inhibit
/ Split Box Connection)
□ MATL-FI
□ MATL-SF
■ MATL-SO
Mattress lower bunk - firm, pocket springs
Mattress lower bunk - semi-firm, pocket springs
Mattress lower bunk - soft, pocket springs
□ HPG-F101
Gearbox mounted hydraulic pump F1-101, fixed displacement,
single flow
Gearbox mounted hydraulic pump F1-41, fixed displacement,
single flow
Gearbox mounted hydraulic pump F1-51, fixed displacement,
single flow
Gearbox mounted hydraulic pump F1-61, fixed displacement,
single flow
Gearbox mounted hydraulic pump F1-81, fixed displacement,
single flow
Gearbox mounted hydraulic pump VP1-120, variable
displacement, single flow
■ OLMAT-PR
Overlay mattress protector - premium
□ OFFICE
Office package in cab
□ SAFE
Safe box at bed end
□ OBSTORRC
Storage, in rear compartment over bunk, with light.
■ BUNKBOX
Lockable drawer under bunk
■ CSPL-BX
□ CSPL-BXD
Storage box in lower center dash panel
Storage drawer in lower center dash panel
□ TABLE
Foldable table at bunk
□ REF-IC25
□ REF-IC27
25 litre fridge in rear overhead locker
27 litre fridge under bunk
□ BOTTLEH1
□ BOTTLEH2
□ BOTTLEH3
One bottle holder in lower dash panel
One bottle holder in dash plus one in bed frame
One bottle holder in bed frame
□ COFMA-PK
Preparation kit for coffee maker
□ CU-ECC
■ CU-HEAT
□ CU-MCC
Automatic air condition
Conventional cab heater
Manual air condition
□ RSENS-W
Wiper rain sensor
□ PH-CAB
□ PH-ENGCA
□ PH-SS
Cab parking heater
Cab and engine parking heater
Short stop cab heater
□ 220EBH15
Engine block heater, 220 volt, 1.5 kW
□ SLCP-LUX
Sleeper control panel
■ INLI-BAS
□ INLI-NL
□ INLI-NLD
Interior white light, no dimming
Interior white and red light, no dimming
Interior white and red light with dimmer
■ ARL-FLX2
Two flexible reading lamps (snake lamps)
□ RHATCH
■ URHATCH
Roof hatch
Without roof hatch
■ GLAS-TIN
Tinted windows
□ AWIND-RF
Rear fixed window (without curtains)
■ WLIFT-EB
Electrical window lift
□ LOCK-ALL
■ LOCK-MAN
□ LOCK-MRP
□ LOCK-REM
Central locking with remote control and electronic main switch
Manual door locking
Manual door locking with internal remote control (from driver
side) of passenger door
Central door locking with remote control
□ HPG-F41
□ HPG-F51
□ HPG-F61
□ HPG-F81
□ HPG-V120
Cab interior
□ LEA-CHD2
■ PLE-CHD2
Plush interior and leather seats
Plush interior and textile/leather seats
■ DASH-BRZ
Bronze coloured accent strip in dash panel
■
□
□
□
□
Driver seat, comfort, suspended
Driver seat, comfort, suspended, electrically heated.
Driver seat, comfort, suspended, electrically heated, ventilated.
Driver seat, comfort, suspended, belt in seat
Driver seat, comfort, suspended, belt in seat, electrically
heated.
Driver seat, comfort, suspended, belt in seat, electrically
heated, ventilated.
Driver seat, de luxe, suspended, belt in seat, electrically
heated, ventilated.
Driver seat, de luxe, suspended, belt in seat, electrically
heated.
Driver seat, de luxe, suspended, electrically heated, ventilated.
Driver seat, de luxe, suspended, electrically heated.
DST-CF1
DST-CF2
DST-CF3
DST-CF4
DST-CF5
□ DST-CF6
□ DST-LUX1
□ DST-LUX2
□ DST-LUX7
□ DST-LUX8
□
□
□
□
□
PST-BSL1
PST-CF1
PST-CF2
PST-CF4
PST-CF5
□
□
■
□
PST-RX1
PST-RX2
PST-STD2
PST-STD4
Passenger seat, basic, sliding, non suspended
Passenger seat, comfort, suspended
Passenger seat, comfort, suspended, electrically heated.
Passenger seat, comfort, suspended, belt in seat
Passenger seat, comfort, suspended, belt in seat, electrically
heated.
Passenger relax seat, swivel/tilt
Passenger relax seat, swivel/tilt/heat
Passenger seat, regular, non suspended
Passenger seat, regular, suspended
□ ARMRE-BB
□ ARMRE-DB
□ ARMRE-PB
Two armrests on both driver & passenger seats
Two armrests on driver seat
Two armrests on passenger seat
□ ARU-BAS
□ ARU-LEA
Vinyl armrest upholstery
Leather armrest upholstery
□ AIRBAG
Airbag on driver side
□ GAUGE-AM
Ampere meter
■ SBD-BLAC
□ SBD-RED
Black safety belts, passengere and driver seats
Red safety belts, passenger and driver seats
■ ISUNF-MD
Front internal sunvisor with driver mirror.
Driver seat belt pretensioner
□ PHONE
GSM Telephone
□ SBPRE-DS
■ Standard Equipment
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
4 (6)
Ref: FH 42R B6LC101 8EE 2013-09-14 ENGVT
FH16 42R Low full air FH 42R B6LC1
□ PHONE-PK
Telephone preparation kit (antenna, antenna attachm. cable
incl.)
□ ACC
Adaptive Cruise Control, automatic distance control
□ LSS-DW
Lane keeping support - lane departure warning system
□ LCS
Lane Change Support
□ DAS-W
Driver Alert Support (drowsy driver warning)
□ AMIR-F20
■ INST-HIG
□ INST-MED
High level instruments.
Medium level instruments
Front close view mirror above windscreen on passenger side
(radius 200 mm)
□ SUNV-SMO
Sunvisor, smoke colour
■ CRUISEC
Basic cruise control (controls in stalk left of steering wheel)
□ RTOLL-PK
Preparation kit for road toll collect (GPS/GSM antenna and
cables)
□ AD-ROOF
□ AD-ROOFB
Roof air deflector
Roof air deflector with light box
□ INFOT-PL
Preparation kit for mounting of TV on left hand side in cab
□ AD-SIDEL
□ AD-SIDES
Long cab side air deflector
Short cab side air deflectors
□ LOADIND
Load indicator, electronically controlled suspension (SUSPLEC).
□ GUARD-HL
Headlamp protector
■ HL-BASIC
□ HL-BHID
Halogen H7 head lamps
Bi-Xenon head lamps, high intensity discharged
□ HL-CLEAN
High pressure headlamp cleaner
□ HL-ADJ
Adjustable headlights
■ HL-ASYMR
Head lamp asymmetric, right hand traffic, left hand drive
□ DRIVL2
■ UDRIVL
Two auxiliary front driving lamps
Without auxiliary front driving lamps
■ FOGL-WC
White front fog lamps
□ ASL-SB2
□ ASL-SBPK
2 70W spotlamps in sign box
Preparation kit for 2 spotlamps in sign box
□ PS-LIGHT
Parking safe light
□ CL-STAT
Cornering lights
□ IDLAMP
Three middle front roof mounted identification lamps
□ IDLMPSW
Switch in cab for identification lamps
□ BEACON-P
□ BEACONA2
Prepared wiring (switch incl.) for beacon lights on cab roof
Two roof mounted amber beacon rotating warning lamps
■ CABPT-R1
□ CABPT-R2
One front cab roof pass through on passenger side
Two front cab roof pass throughs, one on each side
□ SPOTP-F
□ SPOTP-R
Spotlamp preparation in cab front, max 280W
Spotlamp preparation on cab roof, max 280W
□ ROS-IL
Illuminated roof sign
□ HORN-JER
□ HORN-R2S
One front mounted single tone air horn, Jericho
Two roof mounted single tone chromed air horns
■ ANT-CBPK
□ ANT-CBR
CB radio antenna preparation kit (antenna attachment incl.)
Roof mounted antenna for CB radio, single aerial
■ DOL24+12
Dual dashboard mounted electrical outlets, 24V + 12V
□ IMMOBIL
Immobiliser
□ ALARM-B
Burglar alarm (cab)
□ ALCOLOCK
■ MIRSTD
□ MIRTEXT
Alcolock
□ BUPMON
Back-up monitor (CCD-camera, foldable 7" colour dash touch
display & 20/10m cable (rigid/tractor)
□ BUPALARM
Back-up alarm
□ FIREXT3D
□ FIREXT3S
Fire extinguisher, 3 kg, decal in Danish
Fire extinguisher, 3 kg, decal in Swedish/English
□ WARNVEST
Warning vest
□ SAFE-DEU
■ SAFEKIT
□ WARNTRI2
Safekit (approved for Germany)
First aid kit containing sticking plaster, washing and drying
pads, compresses, elastic bandages, respiratory mask, gloves,
scissors and two warning triangles
Two warning triangles
□ WARNLAMP Portable warning lamp with batteries
□ LAMP-IN
Inspection lamp
□ BULBKIT
Bulb and fuse kit
□ 1DAYDIG
■ 1DAYEC
□ 1DAYREC
One day digital tachograph, EC approved
One day analogue tachograph, EC-approved
One day analogue tachograph with engine revolution
registration, EC-approved
mirrors with wide angle mirrors on both sides and close view
mirror on passenger side
Convex electrically heated exterior rear view mirrors with wide
angle mirror on both sides and close view mirror on passenger
side
Convex electrically heated exterior mirrors with text, wide angle
and close view mirror on passenger side
■ JACK-12T
Jack, 12 tonnes
■ TOOLKIT
Complete toolkit
■ INFLAHOS
Tyre inflation hose (18 metres)
□ GAUGE-TP
Tyre pressure gauge
□ ACCBRKTF
□ ACCBRKTR
Accessory roof bracket, front
Accessory roof bracket, rear
■ MAT-RUB
Rubber floor mats
□ CSGN-ENG
Engine and Horsepower decal in the cab roof sign area
■ MAT-INS
Textile insert mat on engine tunnel
■ PAICS-B
■ STWM-LE
Steering wheel material leather
Basic painting in a thunder grey colour of cab surrounding
parts (mirrors, insteps, bumper and if fitted bumper spoiler and
sun visor).
If fitted roof air deflector, side air deflector and chassis fairings
always painted in cab colour.
Complete painting in cab colour of cab surrounding parts
(mirrors, insteps, bumper and if fitted bumper spoiler, sun
visor, roof air deflector, side air deflectors and chassis fairings).
Construction bumper excluded.
Cab Exterior
■ BUMP-P
□ BUMP-S
Front plastic bumper without spoiler
Front steel bumper
■ BUGNET
Mosquito net in front of radiator
□ CTILTP-E
■ CTILTP-M
Electrical cab tilt pump
Manual cab tilt pump
□ CABS-FUA
■ CABS-MEC
□ CABS-REA
Full air cab suspension
Mechanical cab suspension
Cab suspension, rear air and front mechanical
Superstructure preparations
□ MIRBAS1
Convex basic exterior mirrors and wide angle mirror on
passenger side
Convex electrically heated and operated exterior rear view
□ TBC-DUO
□ TBC-EC
Duomatic trailer brake connection
Trailer brake connection, European Comminity
□ TCP-OLSF
Trailer connection bracket mounted in the left front side of the
□ MIRCOMF
■ Standard Equipment
□ PAICS-C
□ REFS-TW
□ REFS-TY
Reflecting white stripes for cab side, by-packed in cab
Reflecting yellow stripes for cab side, by-packed in cab
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
5 (6)
Ref: FH 42R B6LC101 8EE 2013-09-14 ENGVT
FH16 42R Low full air FH 42R B6LC1
□ TCP-OLSR
□ TCP-OM
□ TCP-ORSF
□ TCP-ORSR
□
□
□
■
□
RTRCON14
RTRCON15
RTRCON7
RTRCON77
RTRCONPK
frame overhang
Trailer connection bracket mounted in the left rear side of the
frame overhang
Trailer connetion bracket mounted between the frame rails in
the overhang area
Trailer connection bracket mounted in the right front side of the
frame overhang
Trailer connection bracket mounted in the right rear side of the
frame overhang
Trailer cable connection 14-pin connector.
Trailer cable connections for ADR
Trailer cable connections, UADR
Trailer cable, two connections, UADR
Trailer cable connections preparation kit including electrical
cables and trailer brake piping from cab to the rear axle(s).
□ TD-BAS
■ TD-LED
Trailer detection without LED sensor.
Trailer detection with LED sensor.
■ TRBR-EBS
Electronically controlled trailer brake
□ ELCE-CK
Electrical interface for body builder containing Body Builder
Module (BBM), a 31-pin connector located inside the left hand
side frame rail and cables from BBM to connector.
□ TAILPREP
Tail lift preparation kit
■ AUXSW-6
Wiring for 6 auxiliary dashboard switches and a 31-pin
connector located inside the left hand side frame rail
□ WPRE-BOC
Wiring prep for working lamps on chassis+a two-position
switch, max 140 W
□ BODATF2
■ UBODATT
Lower front body attachments for torsionally flexible platform
body
Lower front body attachments for torsionally semi-flexible body
(van or curtainsider)
Pre-punched front body attachment holes (with no
attachments) for torsionally stiff body (tanker)
Pre-punched front body attachment holes with no attachments
□ TGW-3G
□ TGW-PK
Telematics gateway with 3G
Telematics gateway preparation kit
□ TESP-T
Driver Service Platform with Telematics
□ FMS-PK
Fleet Management System gateway, preparation kit
□ BODATSF2
□ BODATTS
■ Standard Equipment
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
6 (6)
Ref: FH 42R B6LC101 8EE 2013-09-14 ENGVT
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement