MMA160GDM - Weld Expert

MMA160GDM - Weld Expert
MMA160GDM
1. Features
※ Dual function: Lift TIG and MMA;
※ Use the ‘single PC board’ technology, with 32 bit high-speed processors to control
welding characteristics;
※ Digital display, easy to operate;
※ Multi-functional control knob;
※ Data storage capabilities. Three seconds after stopping welding, the welding current
parameter will be saved automatically;
※ The inverter frequency will be preset 40 KHz, energy saving. It also has EMC (Electro
Magnetic Compatibility ) circuit in the main circuit power supply;
※ Make welding much easier with self-adaption of the hot arc and pulse of thrust function;
※ With Lift TIG and up-slope, reduce the consumption of the tungsten rod.
※ With over-loading and over-heating protection;
※ Wide rage for input voltage: ±15%;
※ Smaller, lighter and portable.
2. Picture of inside structure
3. Parameter
Input parameter
Output parameter
Rated Input Voltage
(V)
220
Output Voltage Range 20.4-26.4(MMA)
(V)
10.4-16.4(LIFT TIG)
Input Frequency(HZ)
50/60
Voltage Fluctuation
Range
±15%
Output Current Range 20-160(MMA)
20-160(LIFT TIG)
(A)
Rated Input Current
(A)
30
Power Factor
Efficiency
Duty Cycle
25% (25°C )
Protection Grade
IP23S
>0.73
Weight(KG)
4.5
>80%
Dimension(mm)
288×136×234
4. Application
4.1 Applicable materials
Carbon steel, stainless steel, alloy steel, ferrous metal etc
4.2 Applicable industry
Decoration
Light steel structure installation
Individual workshop fabrication
Machinery maintenance
Handicraft Processing
Sheet metal Processing
Workpiece
Welding
mode
Thickness
(mm)
Welding rod (mm)
Welding current range
(A)
Carbon steel, low
alloyed steel,
stainless steel
MMA
2.0-5.0
2.0/2.5
20-160
LIFT TIG
0.5-4.0
1.0/1.6/2.0
20-160
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement