iMPORTANT SAFETY iNSTRUCTiONS

iMPORTANT SAFETY iNSTRUCTiONS
iMPORTANT
SAFETY
FIRST TiME USE
THE REMOTE
iNSTRUCTiONS
................................................................................................................
CONTROL
ON-SCREEN
CARE OF YOUR
USEFUL
iNDEX
HiTACHi
PROBLEMS
iNFORMATiON
PRODUCT
..................................................................................................
DISPLAY ...................................................................................................
USING THE RGB iNPUT
RECEPTION
................................................................................
SPECiFiCATiON
OF THE
PLASMA
PLASMA
TV .....................................................
TV & REMOTE
CONTROL
..........................................
........................................................................................................
....................................................................................................
..............................................................................................
.....................................................................................................
_L_L'T_I_V_$|O_I_
D ! G ! T A
L
As an ENERGYSTAR Partner. Hitachi
Ltd. has determined that this
®
product meets the ENERGYSTAR guidelines for energy efficiency.
2-3
4-21
22-31
32-54
55-67
68
69
70-76
77-80
81
n
iMPORTANT
SAFETY iNSTRUCTiONS
SAFETY POINTS YOU SHOULD KNOW ABOUT
YOUR HITACHI PLASMA TELEViSiON
Our reputation has been built on the quality, performance, and ease of service of HITACHI Plasma Televisions.
Safety is also foremost in our minds in the design of these units. To help you operate these products properly, this
section illustrates safety tips which will be of benefit to you. Please read it carefully and apply the knowledge you
obtain from it to the proper operation of your HITACHI Plasma Television.
Please fill out your warranty card and mail it to HITACHI. This will enable HITACHI to notify you promptly in the
improbable event that a safety problem should be discovered in your product model.
Follow all warnings and instructions marked on this plasma television.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
,_
CAUTION
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of a
sufficient magnitude to constitute a risk of electric shock to persons.
1,_
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
The exclamation point within an equilateral triangle, is intended to
alert the user to the presence
of important
operating
and
maintenance (servicing) instructions in the literature accompanying
the appliance.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING:
,,TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PLASMA TELEVISION TO RAIN OR
MOISTURE.
,,THE PLASMA TELEVISION SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING AND
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THE TELEVISION.
NOTE:
* There are no user serviceable parts inside the television.
• Model and serial numbers are indicated on back side of the television,
CAUTION:
Adjust only those controls that are covered in the instructions, as improper changes or modifications not
expressly approved by HITACHI could void the user's authority to operate the Plasma Television.
MODiFiCATiONS:
The FCC requires the user to be notified that any changes or modifications made to this device that
are not expressly approved by Hitachi America, Ltd. Home Electronics Division may void the user's
authority to operate the equipment.
POWER SOURCE
THIS PLASMA TELEVISION iS DESIGNED TO OPERATE ON 120 VOLTS 60Hz, AC CURRENT.
THE PLASMA TELEViSiON POWER CORD iNTO A 120 VOLT 60Hz OUTLET.
iNSERT
TO PREVENT ELECTRIC SHOCK, DO NOT USE THE PLASMA TELEVISION'S
(POLARIZED)
PLUG WiTH
AN EXTENSION
CORD, RECEPTACLE,
OR OTHER OUTLET UNLESS THE BLADES AND GROUND
TERMINAL CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
NEVER CONNECT THE PLASMA TELEViSiON
THE SPECiFiED VOLTAGE.
NOTE:
,_
TO 50Hz, DIRECT CURRENT,
This Plasma Television will display television closed captioning, (_
paragraph 15.119 of the FCC rules.
OR ANYTHING
or _iJ),
OTHER THAN
in accordance
with
other hazards.
If the
television
not operate
properly,
unplug
the Plasma
call your
CAUTION: Never
remove the
back
cover ofdoes
the plasma
television
as this
can expose
you toTelevision
very high and
voltages
and
authorized dealer or service center.
2
iMPORTANT
SAFETY iNSTRUCTiONS
Read before operating equipment
Follow all warnings and instructions marked on this monitor.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use the attachments/accessories
specified by the
manufacturer.
12.
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. Monitors are designed to comply with the recommended
safety standards for tilt and stability. Do not apply excessive
pulling force to the front, or top, of the cabinet which could
cause the product to overturn resulting in product damage
and/or personal injury.
16. Follow instructions for wall, shelf or ceiling mounting as
recommended by the manufacturer.
17. An outdoor antenna should not be located in the vicinity of
overhead power lines or other electrical circuits.
18. If an outside antenna is connected to the receiver be sure the
antenna system is grounded
so as to provide some
protection against voltage surges and built up static charges.
Section 810 of the National Electric Code, ANSl/NFPA No.
70-1984,
provides information
with respect to proper
grounding for the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding connectors, location of antenna-discharge
unit,
connection to grounding electrodes and requirements for the
grounding electrode.
=*_
POWERSERVlCEGROUNDING
ELE_TRODESYSTEM
CNECART2_PARTH_
NECNATIONALELECTRICALCODE
Note to the CATV system installer: This reminder is provided
to call the CATV system installer's attention to Article 820-40
of the NEC that provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close
to the point of cable entry as practical.
This product contains lead. Dispose of this product in accordance with applicable environmental
laws. For product recycling
and disposal information, contact you local government agency or the Electronic industries Alliance at www.eiae.org (in the
US) or the Electronic Product Stewardship Canada at www.epsc.ca (in Canada). For more information, call "I-800-HITACHL"
Do not place any objects on the top of the monitor which
may fall or cause a child to climb to retrieve the objects.
PREVENTION OF SCREEN BURN
Continuous on-screen displays such as video games, stock market quotations, computer generated graphics, and other fixed (nonmoving) patterns can cause permanent damage to television receivers. Such "SCREEN BURNS" constitute misuse and are NOT
COVERED by your HITACHI Factory Warranty.
PUBLIC VIEWING OF COPYRIGHTED MATERIAL
Public viewing of programs broadcast by TV stations and cable companies, as well as programs from other sources, may require
prior authorization from the broadcaster or owner of the video program material.
i
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other
limited consumer uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
ACCESSORIES
Check to make sure you have the following accessories before disposing of the packing material.
REMOTE
CONTROL
BATTERIES
POWER
CORD
Cleaning
Cloth
iiiiiiiiii;!;!;!;!;!;!_ii!ilili_iiiiil
®o0o
iiiiiiiiiiiiiiiiii'i !i!iii i iiiill
ii_ii_i!iiii:i:i:i:i:i!ii!i!ii!ii!ii!ii!ii!ii!i!iii,i_ii31_i_
[email protected] i!!i! i i
t_E_U
_TUn
iiiiiiiiiiiiiiiiiiiiiiiiii'i!_i!iiii!_!_ii!_i_i!iiiiiii!
2.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_!i_i!_!i Speaker
Wires
4.
Speakers
(×2)
Speaker
Holder
(x4)
aZE
[
®®®_'
®®®
®®®
®®®
®®®
Av
A,2
0000
6.
A,s
aw
Mounting
0600
Screws
(x8)
1.
CAUTION:
1.
2.
3.
4.
5.
Cushions
//
8.
9.
ventilation for the electronics or proper support for the front glass panel. This plasma television product is
Ceiling
is not tilting
recommended.
the vertical.
panel on the ceiling does not provide adequate
designed mounting
for a maximum
angle of 45 Mounting
degrees from
Remote Control Unit CLU-W900 (P# HL02042)
Two "AA" size, 1.5V batteries (P# FQ00021 ).
Power Cord (P#EV01841)
Cleaning Cloth (P# MS00931).
Speaker wires (for monitor speakers).
REMOTE
(x2)
CONTROL
BATTERY
6.
7.
8.
9.
INSTALLATION
Speakers (x2) (P# GM01267)
Speaker Holder (x4)
Mounting Screws (x8)
Cushions (x2)
AND REPLACEMENT
1. Open the battery cover. Slide back and remove the battery
cover in the direction of the arrow.
2. Load batteries. Load two Size AA batteries
observing the correct polarities.
included
3. Close the battery cover. Replace the battery cover in the
direction of the arrow and snap it back into place.
k
Danger of explosion if battery is incorrectly replaced. Replace with the same or equivalent type.
[_
CAUTION:
HOW TO SETUP YOUR NEW HITACHI
PLASMA DISPLAY TELEVBION
To take measures to prevent the Plasma Television from tipping over and prevent possible
unit in a stable place.
injury it is important to mount the
Securing to a table=top
1. Using wood screws (two) fasten the set to the clamping screw holes on the rear of the Plasma Television stand as shown below.
2. Using commercially available wood screws, secure the set firmly in position.
ii;
i!:i ,
Wood screw
two places
Securing to a wall or pillar.
Using a commercially available cord, chain and clamp, secure the set to a firm wall or pillar.
10cm (4 inches)
or more
or chain
or Pillar
i NOTES:
1. Do not block the ventilation holes of the Plasma Television. Blocking the ventilation holes might cause fire or defect.
2. The plasma display has one AC cord. In case of an abnormal symptom, unplug the AC cord.
3. If you purchased the wall mount bracket option, please ask for professional installer. Do not install by yourself.
Caution when moving the main unit
As this product is heavy, whenever it is moved, two people are required to transport it safely. Whenever the unit is moved it should be
lifted forward using the two handgrips at the back for the plasma television. When moving the Display Monitor, lift the handles and the
bottom frame as shown below. Do not grab the speakers or the back cover when lifting.
Handgrips
30 cm (12 inches)
1
10 cm (4 inches)
--
_10
cm (4 inches)
ANTENNA
Unless your Plasma Television is connected to a cable TV system or to a centralized antenna system, a good outdoor color TV antenna
is recommended for best performance. However, if you are located in an exceptionally good signal area that is free from interference
and multiple image ghosts, an indoor antenna may be sufficient.
LOCATION
Select an area where sunlight or bright indoor illumination will not fall directly on the picture screen. Also, be sure that the location
selected allows a free flow of air to and from the perforated back cover of the set. In order to prevent an internal temperature increase,
maintain a space of 10 cm (4 inches) from the sides/back of the monitor, and 30 cm (12 inches) from the top of the television to the wall.
To avoid cabinet warping, cabinet color changes, and increased chance of set failure, do not place the TV where temperatures can
become excessively hot, for example, in direct sunlight or near a heating appliance, etc.
HOW TO SETUP YOUR NEW HiTACHi
PLASMA DISPLAY TELEViSiON
ATTACH
THE SPEAKER
SYSTEM
TO THE MONITOR.
CAUT,ON:
Makesurethemon torpower ssw tChedo w ththestand
connect or d soonnect the speaker cab es
I |
t
11. Attachthespeakerbracketstothespeakersystems.
Attachthescrew_inap__iti_nthatall_w_y_ut_readthe_peakerh_lder_rientati_nmarkers(R)_(L)_
n the case of (R)
(R)
--7
Speakehoder
(L)
F
O .....
/
screw X 2
NOTES:
Speaker
holder
Cushion
USE OF CUSHIONS
in some cases, there can be a gap between the main unit and the speaker.
You can attach the cushions provided to the side of the speaker system,
if desired, to eliminate the gap.
Cushion
Attach the cushions
"""_['X
to the sides of the
]'L_"J_
speakers facing the
main unit.
_
Alignthecushons I_ I
[]
to the frontofthe
I_ I
I
Im
backcase and affix I_ I
/
I
I
I
I
Back case
2. Attach the speaker systems to the monitor.
Remove two screws on each side of the monitor as shown and keep them for re-install. Loosen two screws on each
side of the monitor as shown so that the speaker holders can be slide on to them. Insert the loosened screws into the
engaging holes of the speaker holders that are attached to the speaker system, and slide the screws downwards. Next,
use the previously-removed screws to fasten the speaker holders into the mounting holes in the monitor. Tighten the
four screws to secure.
Ri, ht side
__[e
sen
screws
WS
Monitor rear side
HOW TO SETUP YOUR NEW HiTACHi
PLASMA DISPLAY TELEVISION
3. Attach the connection cables to the speaker system.
Speaker terminals
I
!_q
Connect the copper-coloured
_1... ] wire to the (_side
Treating the wire ends
Pull off while twisting
Connect the silver-celeured
to the @side
i i i'
i!ii_,
iiiim;;;
ii_
Please prepare the supplied
speaker cables,
Pressdown
ns rtthe
_d_,
,theleverwith
yourfinger
'_wire
J_
4. Attach the speaker connection cables to the monitor.
Pressthe
level down
[,_
CAUTION:
Be sure to insert the speaker cables securely.
Lock the connection terminal level securely.
_,X
j,__ur
Remove
finger
HOW TO SETUP YOUR NEW HiTACHi
PLASMA DISPLAY TELEViSiON
VIEWING
The major benefit of the HITACHI Plasma Television is its large viewing screen. To see this
large screen at its best, test various locations in the room to find the optimum spot for viewing.
The best picture is seen by sitting directly in front of the TV and about 8 to 18 feet from the
screen.
During daylight hours, reflections from outside light may appear on the screen. If so, drapes
iiiiiiiiiiiiiiiii_;ili:_i_i!_iiiiii!i
or screens can be used to reduce the reflection or the TV can be located in a different section
iiiiiiii!J!!!!!!!!!!!!!!!!!!!!iii!!_!i!i_ii
of the room.
If the TV's audio output will be connected to a Hi-Fi system's external speakers, the best
audio performance will be obtained by placing the speakers equidistant from each side of the
!ijjjjjiiiiiiii77
i i!i icabinet and as close as possible to the height of the picture screen center. For best
receiver
stereo separation, place the external speakers at least four feet from the side of the TV, place
the surround speakers to the side or behind the viewing area. Differences in room sizes and
iiiiiiiiiiiiiiiiiiiiiiiiiiT!_!;!!!!!!!_ili!i!:il
acoustical environments will require some experimentation with speaker placement for best
iiiiiiiiiiiiiiiiiT!performance.
! iT!
iiiiiiiiiiiiiiiiiiiiiiTi77iTii ii
iiiiiiiiiiiiiiiiiiii!ii!iiiiiii!i!ii 7i
iiiiiiiiiTi!!i!!i!711i !ililil
iii'i !i!iiiiiii!ii!ii iiiiiiiiiiiiiiiiii!iii:i ;! ill
iiiiiiiiiiiiiiTi!iiiii!i!i!i!!i!!i!!i!!i!!i!! ii !ii i
i_i_8 _ _
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiT
iiiili!i!i
IMPORTANT
NOTES
No.
Items
1
Arching
plasma
panel,
Notes
2
Interference
equipment,
3
Bright
4
Picture
Image
(Spectrum)
When
while,
5
Display
panel
temperature
surface
is too high
The plasma display
panel is lighting the phosphors
by the discharge
of internal radiation.
In
some cases, this may cause the temperature
of the panel surface
to increase.
Please note
that this is not a malfunction.
The Plasma TV surface
temperature
is higher than a
Cathode-ray-tube.
6
Plasma
7
Transportation
When the PDP monitor
is transported
horizontally,
the glass panel has the possibility
of being
broken or increasing
the picture defects.
At the time of transportation,
horizontal
style is
prohibited.
More-over,
please treat the plasma panel with great care because
of a precision
apparatus.
Please instruct transporters
so that it should be put into the packing
box at the time
of shipment.(There
is a possibility
that breakage
of the panel or defects will increase.)
Rough transportation
might cause damage
to the panel and pixel failure.
8
Image
The plasma monitor
illuminates
phosphor
to display images.
The phosphor
has a finite
illumination
life. After extended
periods
of illumination,
the brightness
of the phosphor
will be
degraded
to such extent that stationary
images would burn-in that part of the screen as
grayed-out
images.
sound
display
from
monitor's
for infrared
and
dark
spots
Surface
retention
A buzzing
sound might be heard when
room.
This is due to the plasma panel
is normal
and it is not a malfunction.
Some infrared
rays are emitted
infrared controlling
equipment.
from
the plasma
drive circuit
the plasma
television
is turned on in a very quiet
when it is functioning.
This arching
sound
television
s panel
that
might
affect
other
High-precision
technology
is used to manufacture
the plasma display
panel;
But in some
cases, there are minor defects
in some parts of the screen.
Points that do not light, points
with brightness
different
from that of the periphery,
points with color different
from that of the
periphery,
etc. Some pixels will always
be on or always off. Please note that this is not a
malfunction.
receving
still picture signals, (e.g. channel
number
indication or clock
you can see image-like
when the picture varied.
This is not a defect.
The plasma
panel
is made
from
glass.
Heavy
shock
on the front
panel
indication)
might
damage
for a
it.
Tips to prevent
such image retention
are:
- Do not display images having sharp brightness
differences
or hi-contrast
images, such
monochrome
characters
and graphic
patterns,
for long.
- Do not leave stationary
images appearing
for long, but try to refresh them at appropriate
intervals of time, or try to move them using screen saver function.
- Turn down the contrast
and brightness
controls.
and contrast
9
Luminosity
10
Granular
11
Disturbance
apparatus
12
About the use
environment
of PDP
television
(temperature)
Electric discharge/luminescence
characteristic
of the PDP panel also changes
with peripheral
temperature.
Moreover,
since there is also high power consumption
value, a specified
temperature
environment
is required.
13
Caution
storage
Storing the plasma
an unstable
picture
television
for a period of more
when the set is turned on.
14
Operating
Operating
800
15
Storage
Storage
16
Power
spots
to video
on prolonged
ON or OFF
PDP
television
When
a screen
If an apparatus
or disturbance
has luminosity
is seen
at point-blank
(VCR, etc.) antenna
may be received.
altitude:
AItitude:
and
300
to 1,114hPa
low contrast
range,
compared
a random
line is arranged
(6,194ft
CRT television.
fine grain
near the
than
to -2,484ft).
to 1,114hPa(31,912ftto-2,484ft).
with
as
may be visible
monitor,
2 to 3 months
Operating
Storage
Frequent
use of the Power ON or OFF might trigger the power
does not turn ON, please wait a little before turning ON again.
the image
without
temperature:
circuit.
part.
may shake,
use might
temperature:
protection
to a dark
cause
41 °F to 95°F.
5°Fto
140°F.
If the TV
HOOKUP
Most video/audio
CABLES
connections
between components
can be made with shielded video and audio cables that have phono connectors.
For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell
audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output
and input connector types required by the various components and the length of each cable,
30e-Ohm Twin Lead Connector _
This outdoor antenna cable must be connected
antenna adapter (300-Ohm to 75-Ohm).
to an
Phono Connector
Used on all standard video and audio cables which
connect to inputs and outputs located on the rear jack
panel and front control panel.
AUDIO IN
3.Smm
STEREO
MINI-PLUG
@
2
RCATYPE
PLUGS
Stereo Cable (3.5 mm plug to 3.5 mm plug)
This cable is used to connect from external audio out to
the audio input (ex. RGB Input).
"F" Type 75=Ohm Coaxial Antenna Connector
For connecting RF signals (antenna or cable TV) to the
antenna jack on the television.
S=Video (Super Video) Connector
This connector is used on camcorders, VCRs and laserdisc players with an S-Video feature in place of the
standard video cable to produce a high quality picture.
°.sub
M,,,15-p,n
Cab,eo_
iii_
Thiscab,e
isused
toconnect
acomputer
output
tothe
iii:i_
...
D-SUB input located on the rear panel of the Monitor.
The resolution should be set correctly to display the
signal on the Plasma Monitor.
ANTENNA
CONNECTIONS
TO REAR PANEL JACKS
VHF (75-Ohm) antenna/CATV (Cable TV)
When using a 75-Ohm coaxial cable system, connect the outdoor
antenna
or CATVcoaxial cable to theANT (75-Ohm) terminal.
WVHF(3OO-Ohm)
antonn,_UHFantonna
:
_
using a 300-Ohm twin lead from an outdoor antenna, connect
theVHForUHFantennaleadstoscrewsoftheVHForUHFadapter.
_
Plugtheadapterintotheantennaterminal
Attach
When both VHF and UHF antennas
ontheTV.
are connected
anoptional
antenna
cablemixertotheTVantenna
terminal,
connectthecablestothe
antenna mixer. Consultyourdealeror
......................................
service store for the antenna mixer.
antenna
@9
7F
O
OL
.....
Q
I _
L
Back of Plasma Television
10
_
INPUT
v_oEoj{ ERI _
(AV2)
j[
INPUT
V_DEO/
(AV1)
J
FRONT PANEL CONTROLS
FRONT
ViEW
/Cabinet
(front frame)
Panel .....
i i i'
i!ii ,
I....
Control
• Adjustment buttons
on the bottom.
I
panel
are located
.....................................
, J"®
• The back cover is provided with
indications to distinguish the
adjustment
buttons.
®
• The main power switch
lower surface.
is located
at the back, on the
Main power switch
INPUT SELECT
VOLUME
UP/DOWN
buttons
(< I_ADJUST
(A SELECT button)
CHANNEL DOWN button
buttons)
(T SELECT button)
SUB-POWER
• (
(_)
) indicates
button
(OK button)
CHANNEL UP button
button
the function
while the MENU
is displayed
on the screen.
MENU/EXIT button
This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. This
button also serves as the EXIT button when in MENU mode.
INPUT/SELECT button
Press this button to select the desired input, AVI to AV4, RGB1 and RGB2. Your selection is shown in the top right corner of the
screen. This button also serves as the SELECT/OK button when in MENU mode.
(_)
(_)
(_)
CHANNEL selector
Press these buttons until the desired channel appears in the top right corner of the TV screen.
the cursor down (V') and up (A) buttons when in MENU mode.
VOLUME level
Press these buttons to adjust the sound level. The volume level will be displayed on the TV screen.
the cursor left (<) and right (_) buttons when in MENU mode.
These buttons also serve as
These buttons also serve as
SUB POWER button
Press this SUB POWER button to turn ON the Plasma television when not using the remote control power button
11
FRONT PANEL CONTROLS
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
(_ PlasmaTelevision
"MAINPOWER"switch
This power switch is for the complete system, and must be turned ON/OFF manually.
POWER" to ON condition (lights red) for stand-by mode.
It is recommended
to leave the "MAIN
iiiiiiiiiiiiiiiiiiii!ii!i!iiiiiiiii!i!ii i!i!i!!i!i
iiiiiiiiiiiiiiiii_;ili:_i_i!_iiiiii!i
Q
POWER light indicator
iiiiiiii!J!!!!!!!!!!!!!!!!!!!!iii!!_!_!i!i_ii
To turn the monitor ON,
press the main power switch located on the lower right side of the monitor. A red stand-by indicator lamp
bezel will illuminate. The Display Monitor is now ready for remote on/off operation.
on the! lower
right !ililil
corner of the front
iiiiiiiiii'i ! located
iiii!!i!!i!i
! ! !!ili
Indicating lamp
iii'i !i!iiiiiii!ii!ii
iiiiiiiiiiiiiiiiii!iii:i ;! ill
iiiiiiiiiiiiiiiiii'ii i!iiiii!i!i!i!!i!!i!!i!!i!!i!!, ii !ii i
Indicating
Power status
iiiiiiiiiiiiiiiiiiiiiiiiii_i;!i:i!_!;!!!!!!!_ili!i!:il
lamp
When the
Off
Off iiiili!i!i
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
to OFF.
Lights red
Lights green
NOTES:
orange
1.
2,
main power
switch
is set
Off
(standby)
When the main power switch is
ON, and the POWER button on the
remote control or the SUB POWER
button on the underside of the
front of the frame is OFF.
On
When the main power switch is
ON, and the POWER button on the
remote control or the SUB POWER
button on the underside of the
front of the frame is ON.
off
Lights
Operating
(Power Save)
When the main power switch is
ON, and the POWER button on the
remote control or the SUB POWER
button on the underside of the
front of the frame is ON.
However, the status will be in
POWER SAVE mode when in RGB1
or RGB2 input.
Your HITACHI Plasma Television will appear to be turned OFF (lights orange) if there is no video input when RGB1
or RGB2 is selected. Check the Power Light to make sure the Plasma Television is turned off or in Stand-by
mode (lights red) when not in use.
Remote Control can not turn ON/OFF the "MAIN POWER" of the Plasma Television.
REMOTE CONTROL sensor
Point your remote at this area when selecting channels, adjusting volume, etc.
'
'_1
'J_With
in 30
With in 30/
\dngrees
degrees_
About 3r_
_
_About 3m
About 5m
12
REAR PANEL JACKS
device
connection
DIGITAL INPUT
ANALOGINPUT
ii;
i!ii ,
|
....
,,:,
,.PUTsoA°T
, !ii!iiii!ii!iiiiii
Av4
iilJ,i
i
INPUT
_-Auolon
N
O
VlOEO
S3/r_oNo @
_
.
W
,
pWB
_
P_'R
J voEo
,
/
Antenna Input
Use the INPUT button to select Antenna.
Audio/Video Inputs AV1, AV2, AV3 and AV4
By using the INPUT button, or the individual INPUTS buttons of the remote control, you can select each video source. Use the audio
and video inputs to connect external devices, such as VCRs, camcorders, laserdisc players, DVD players etc. (if you have mono
sound, insert the audio cable into the left audio jack).
i NOTE:
(_)
(_
(_)
See page 20 for Input AV4 (SCART).
i
MONITOR OUT
These jacks provide fixed audio and video signals (ANTENNA, AVI_AV4)
Input AV1 and AV2, RGB inputs will not have monitor output.
S=VIDEO AV3
AV3 provide S-VIDEO (Super Video) jacks for connecting
Component:
which are used for recording.
Component
signal to
equipment with S-VIDEO output capability.
Y-PBPR Inputs
AV1 and AV2 provide Y-PBPR jacks for connecting equipment with this capability, such as a DVD player or Set Top Box. You may
use composite video signal for AV1 and AV2.
NOTES:
1. S-Video has a higher priority over video input.
2. Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components
Plasma Monitor's PB input and the components R-Y output to the Plasma Monitor's PR input.
B-Y output to the
3. Your component outputs may be labeled Y-CBC R. In this case, connect the component C B output to the Plasma
Monitor's PB input and the component C R output to the Plasma Monitor's PR input.
4. It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-PBPR inputs (See page 36).
5. To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-PBPR jacks, and
RGB inputs.
13
REAR PANEL JACKS
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
(_) RGB1 - Digital input (DVI-PC / DVI-STB)
Use this DVI input for your external devices with DVI output (see pages 20 and 55).
:N
RGB2-Ana,og,nput
Use this 15-pin D-Sub inputforyourexternal
RGB1 -Audio
deviceswith
RGB output (see pages20
and 55).
Input
ConnectaudioforRGB1
input(ifyouhavemonosound,
inserttheaudiocableintothesamejack).
-Audio,nput
Connect audio for RGB2 input (if you have monosound
insert the audio cable into the samejack).
Service Adjustment Port
This port is for service adjustment only.
14
CONNECTING
EXTERNAL
VIDEO SOURCES
The exact arrangement you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set Top Box to your Plasma
TV is dependent on the model and features of each component. Check the owner's manual of each component for the location of
video and audio inputs and outputs.
The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your
particular assortment of components and features. For best performance, video and audio cables should be made from coaxial
shielded wire.
Before Operating External Video Source
Connect an external source to one of the INPUT terminals, then press the INPUT button on the Control panel located at the bottom of
the display monitor or the INPUT button on the remote control repeatedly to cycle through the INPUT items.
CONNECTING
A MONAURAL
AUDIO SOURCE TO AVl~AV4
1.
Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO)jack,
Rear Panel below.
2.
Connect the cable from the AUDIO OUT of the VCR or the laserdisc player to the INPUT (MONO)/L(AUDIO)
3.
Press the INPUT button, repeatedly till you select AVl to view the program from the VCR or the laserdisc player. The VIDEO
label disappears automatically after approximately four seconds.
4.
Press the INPUT button repeatedly till you select the ANTENNA input to return to the previous channel.
@ OUT
AUDIOOUT VIDEO
Back of VCR
,€==9
VCR
15
as shown on the Monitor
jack.
i i i'
i!i i ,
CONNECTING
CONNECTING
A STEREO VCR OR STEREO LASERDISC
EXTERNAL
VIDEO SOURCES
PLAYER
iiiiiiiiiiiii'ii'i!_i!_ili_i!i!i!i!i!_i
1. Connect
thecable
from
the
VIDEO
OUT
oftheVOR
orthelaserdisc
player
totheINPUT
_VlDEO_
jack,
asshown
ontheMonitor
iiiiiiiiiiiiiiiiiiii!ii!i!iiiiiiiii!i!ii
RearPane,
be,ow. i!i!i!!i!i
iiiiiiiiiiiiiiiiii_i!iiii:i_!_iiiii!i
2
•
Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack•
3
•
4.
Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack•
Press the iNPUT button, repeatedly till you select AVl to view the program from the VCR or laserdisc player• The VIDEO label
disappears automatically after approximately four seconds•
5.
Press the INPUT button repeatedly till you select the ANTENNA input to return to the previous channel•
}
........................................................................
............................................
..................................................
,;:;[ ...........................................
t''
...........
¢
i
I
!i
i
,/"]]'_
'+........
I
1_/_) Q) (+) Ii)_
Iri; _o:
_>"
1!_i)
/"]
'
')
I '(l
I.....
,_:;.
i I,,i_,
_. ,DIIr[#/MONOFCOMPONENT'-'-'_
t
I_B
II
_
_J
_j
i
It, o''o',
z-VCR
NOTES:
1. Completely insert the connection cord plugs when connecting to rear panel jacks• The picture and sound that is
played back will be abnormal if the connection is loose•
2. A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output•
Refer to your VCR operating guide for more information on line input-output connections•
16
CONNECTING
EXTERNAL
VIDEO SOURCES
CONNECTING S-VIDEO VCR OR LASERDISC PLAYER
1.
Connect the cable from the S-VIDEO OUT of the S-VHS VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown
on the Monitor Rear Panel below.
2.
Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
3.
Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
4.
Press the INPUT button, repeatedly till you select AV3 to view the program from the VCR or laserdisc player. The VIDEO label
disappears automatically after approximately four seconds.
5.
Press the INPUT button repeatedly till you select the ANTENNA input to return to the previous channel.
OUTPUT
Backo,
vcRor
Laserdisc Player
VCR or Laserdisc Player
NOTES:
1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
2. A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output.
Refer to your VCR operating guide for more information on line input-output connections.
17
i i i'
i!ii ,
CONNECTING
CONNECTING
1.
A STEREO LASERDISC/DVD
EXTERNAL
VIDEO SOURCES
PLAYER OR NDTV SET TOP BOX TO AVl OR AV2 COMPONENT:
ConnectthecablefromtheYOUTofthe
Laserdisc/DVD
playerorHDTVsettopboxtothe
INPUT(Y)
Y=PBPR.
iack, asshown
onthe
MonitorRearPanelbelow.
2.
_3.
6.
7,
Connect the cable from the CB/P B OUT or B-Y OUT of the Laserdisc/DVD
player or HDTV set top box to the INPUT (PB) jack.
Connectthe
playeror
cablefrom
theCR/P R OUTor
R-YOUTofthe
Laserdisc/UVD
HDTV settop
box to the INPUT (PR) jack.
Connect the cable from the AUDIO OUT R of the Laserdisc/DVD
player or HDTV set top box to the INPUT (AUDIO/R) jack.
Connect the cable from the AUDIO OUT L of the Laserdisc/DVD
player or HDTV set top box to the INPUT (AUDIO/L) jack.
Press the INPUT button, repeatedly till you select AVl or AV2 to view the program from the Laserdisc/DVD
top box. The VIDEO label disappears automatically after approximately four seconds.
player or HDTV set
Press the INPUT button repeatedly till you select the ANTENNA input to return to the previous channel.
,€==
DVDPlayer
I L R°W
_4---
OR-- "!_
I
OUTPUT
Back of
_VIDEO_
r AUDIO.I DVDPlayer
HDTVSet-Top Box
Y
NOTES:
1. Completely insert the connection cord plugs when connecting
played back will be abnormal if the connection is loose.
2. See page 21 for tips on REAR PANEL CONNECTIONS.
18
to rear panel jacks.
The picture and sound that is
CONNECTING
EXTERNAL
AUDIO/VIDEO
DEVICES
The MONITOR OUT terminal outputs video and audio of the ANTENNA and INPUTS AV1, AV2, AV3 and AV4. It does not output
component video.
i i i'
i!i_i_
; ;s;
£s/}
' i:
¢
AV1
ii_
*t0?,¢l
VCRor other external
components
i
NOTE:
If the OUTPUT (MONITOR) terminal is connected to an external monitor with a 75 Ohm terminal, it is possible to view
the same image as on the main unit. But it is possible to monitor only the composite video signal from AVl, AV2, AV3 or
AV4 input that is displayed on the screen at the time.
19
i
REAR PANEL CONNECTIONS
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
Connecting to a Video Imaging Device
1.
Make sure that the power switch of the monitor is turned off.
Make sure that the power switch of the imaging device is turned off.
Use a commercially available cable and connector to connect the signal input terminal on the rear panel of this device and the
signal output terminal of the imaging device.
I_pUT
(AV4)
SCART
]_[_'°_
vs_- J _
Use either of them.
/k
_
OVO
p,oyer
t,To
{
J
INPUT
(AV2)
II
INPUT
(AVI)
Set_op_ox
I
o
_
_g.=
-.
= _-o
o
_8
_
_=
_
_-o
o
has an
Video
disc
player
VCR #1
S video
input terminal
With DVI-STB and RGB component setup
/
_I
equipments.
o component
video
Please
use the connection
cable
suitable
for the terminal
form of video equipment.
NOTES:
1. Cables are optional, except when specified.
2. The SCART terminal Adaptor for (AV4) is optional.
3. If video equipment with an S video output terminal is used, cabling by the S video cable is recommended to provide
finer video quality. (If the S video input terminal and the video input terminal of AV3 connect to the monitor at the same
time, S video input would govern.)
4. If the adaptor is applied to AV4 input as shown in the drawing, it is impossible to receive RGB signal.
2O
TIPS ON REAR PANEL CONNECTIONS
S-VIDEO, YPbPR, connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these
connections in place of the standard video connection if your device has this feature.
®
If your device has only one audio output (mono sound), connect it to the left audio jack on the Monitor Rear Panel.
®
Refer to the operating
®
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output.
VCR operating guide for more information on line input-output connections.
®
guide of your other electronic
equipment
for additional
information
on connecting
your hook-up cables.
Refer to your
Connect
on,o, onent
ovo mco
etc.0e ,
®
COMPONENT:
Y-PBPR (AVI & AV2)connections are providedforhighperformance components, such as DVD playersand settop-boxes. Use these connections in place of the standard video connection if your device has this feature.
,
Your component
outputs may be labeled Y, B-Y, and R-Y. In this case,
input and the components
connect
the components
B-Y output to the Monitor PB
R-Y output to the Monitor PR input.
iiiiiiiiiiiiiiiiiiiiiiii
,
Your component outputs may be labeled Y-CBC R. In this case, connect the components
components C R output to the TV's PR input.
®
It may be necessary
®
To ensure no copyright infringement,
®
AV1 or AV2 can accept both component
,
When using a DVI input from a Set-Top-Box,
to adjust TINT to obtain optimum picture quality when using the Y-PBPR inputs.
the MONITOR OUT output will be abnormal, when using the Y-PBPR, input jacks.
and composite
Terminal
S-video
Component
AV1
0
0
AV2
O
O
AVS
O
O
AV4
O
C}
RGB1
to use a 1080i or 720p input signal.
(See PRODUCT SPECIFICATIONS
RCA/SCART
CVBS
video signal.
it is recommended
Applicable video signals for each input terminal
Signal
C B output to the TV's PB input and the
D-sub
DVI
RGB
PC
STB
0
0
RGB
Component
Q
O
O
0
RGB2
21
for details. )
TO CONTROL
®
®
HOW TO
USE THE
REMOTE
YOUR
PLASMA
TELEViSiON
POWER
PICTURE
iNPUT
RECALL
AUDIO
MPX
SURROUND
MULT.PIC
®
®
MENU
RETURN
®
®
[email protected]®
@
iiiiiiiiiiiiiiiiiiiiiiOi_!ii:i!
®
iiiiiiiiii_i!_i!iiiiiiiiiiiiiiiiiiiiiiiiiiii:iZ_!i!ili
®
iiiiiiiiiiiiiiiiii'ii_i!iiiilililililiiii:i!i!Oi
_
iiiiiiiiiiiiiiiiiiiiiiiiii_i_i_:!ii:i:i:ii_ii:i_!_!
®
®
i!!!!!!i!i!i!i!i!i!i!i!i!i!i!i!!!_i_!i_i!
iii'i_!iiiiiiiii!ii!i!iiii!i!i!i!i!i!i!i!ii!!iii!_,_i
®
®
®
@
POWER button
Press this button to turn the TV set on or off.
PmCTURE MODE button
Press this button repeatedly to cycle through the Day and Night automatic picture mode settings.
NOTE:
Not available on RGB1 and RGB2 inputs.
AUDIO MODE button
Press this button repeatedly to cycle through the automatic audio mode settings.
SURROUND button
Press this button to set the Matrix Surround setting to ON or OFF.
22
HOW TO USE THE REMOTE
TO CONTROL YOUR PLASMA TELEViSiON
(_)
INPUT button
Press this button repeatedly to cycle through the Seven (7) available inputs (ANT, AV1, AV2, AV3, AV4, RGB1 and RGB2).
(_
RECALL button
Press this button when you want to check the channel being received, the picture or input signal source, the OFF timer
and ON timer.
3
Stereo
--Input
-_- --Audio
Source
Broadcast
Off-Timer ---:--
Q
MPX button
Press this button repeatedly to cycle through the Multi-Channel TelevisionSound options. Multi-Channel Television Sound will allow
you to select STEREO (a stereo broadcast), MONO (monaural sound) used when receiving a weak stereo broadcast or 2nd Audio
Prog (SAP) which may be a secondary language, weather report, etc. The sources received will be displayed at the top right edge
of the TV. The source you select will be displayed above the sources received. See example below for each selection when both
stereo and second audio are received (monaural is always received).
STEREO SELECTED
SAP SELECTED
MULTI PiC. (Picture-in-Picture) button
See separate section on pages 27-30 for a description.
(_)
MULTI PICTURE MODE buttons
See separate section on pages 27-30 for a description.
23
MONO SELECTED
TO CONTROL
(_)
HOW TO
USE THE
REMOTE
YOUR
PLASMA
TELEViSiON
CLOSED CAPTION (C.C.) ON/OFF buttons
Press the ON button to turn ON the Closed Caption and press the OFF button to turn OFF the Closed Caption.
MENU button
Press the MENU button to start the On-Screen
RETURN button
Use this button while in the On-Screen
On-Screen Display at a time.
Display (OSD) mode. Press it again to EXIT/quit.
Display mode. Press the RETURN button to navigate back one (1)
CURSOR buttons / OK button
All the On-Screen Display features can be set or adjusted by using the CURSOR buttons and the OK button, except for numeric
entries.
iiiiiiiiiiiiiiiiiiiiii_i!i!ili!i(_
CHANNELUP(CH+(A))/CHANNELDOWN(CH-(T))
iiiiiiiiiiiiiiiiiiiiii_iiiiiiiii!
Pressthesebuttenstese_ectdes_redpregramchanne_s.
' iiiiiiii®VOLUME
UP
(VOL+ ,)),VOLUME
OOWN
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii:!ii:i:i:ii_iiiii!i
!
Press these buttons to select desired volume level.
i!i!i!i!!iiiiiiiiiii !i i®OVOCONTROLbutt°ns
iiiiiiiiiiiiii_ii!i!iiiii!i!ii:iiiiliiiii!:iiiii_iii
Use these buttonsto
operatetheselected
brand of DVD player.
iiiiiiiiiiiiiiiiiiiiii_i_!_:ii!i!iiiiii_i!:_i_ii_!_!
iiiiiiiiiiiiiiiii i i i !!:i ::! [email protected]
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_!!ii!ili
PresstheMUTEbutt_nteturnthes_undc_mpletely__.T_rest_retheseund,presstheMUTEbuttenaga_n_rtheVoLUMEUP
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i!
(VOL+ (_)).
FREEZE button
Press the button to freeze the picture.
Freeze
Normal
FREEZEo
24
Normal
HOW TO USE THE REMOTE
TO CONTROL YOUR PLASMA TELEViSiON
(_)
ZOOM button
Each time the ZOOM button is pressed, the screen display size will change in sequence and the status will be displayed at the
bottom of the screen.
NOTES:
1. During VIDEO signal input (AVl, AV2, AV3, AV4, RGB1 (set to [DVI-STB]) and RGB2 (set to [Component])).
r=-_ 4:3-_ul
PanoraImic_ne_aZo°m =_
2. The size will fix as Full mode and not change when receiving the component signal of 1080i/50, 1080i/60, or 720p/60.
Full
Display
size selection
diagram
When you want to
Play a 4:3 image
Set the display size
in a 16:9 screen
faithfully
Play a 4:3 image
in a 16:9 screen
with the
height
and width
of the middle
screen
enlarged
on equal
both
sides
appearing
faithfully
scales
somewhat
Play a 16:9 VISTA size
image
of the
image
reproduced
and with
Input signal
i Blanking
Panoramic
(4:3
Cinema
expanded
in the 4:3
size
on both
sides.
signal)
_
on the 16:9
image
vertically
occurs
enlarged.
Zoom
I. The 4:3 image is called a letterbox
image.
i° In some cases, some slight blanking
_
(Vista)
Play a 21:9
Remarks
screen
4:3
screen.
image
Display
remain
in the 4:3
on the 16:9
ih
Cinema
at the top and
may
bottom.
some cases,
some slight blanking
at the top and bottom.
may
i remain
screen.
(Cinema)
Play a 4:3 image
in the standard
faithfully
vertical
horizontally
squeezed*
Display
area
Resolution
Display
in a 16:9 screen
size
and
i* An image
Full
shrunk
(Squeeze)
selection
diagram
(RGB
an aspect
ratio of 16:9
to 4:3 to display
in a
4:3 screen
input)
Full display
Full
with
horizontally
Circular
Normal
Real
display
Zoom 1
Zoom2
Zoom3
640 X 480
(VGA)
800 X 600
(SVGA)
1024 X 768
(XGA)
1280 X 1024
(SXGA)
1600 X 1200
(UXGA)
* VGA and W-VGA
only
Processes such as compression (thinning) and expansion are performed for the above signal display. Because of this,
there is a possibility that flicker may become noticeable on Zoom (1 - 3) depending on the display contents. If this occurs,
turning the Vertical Filter On (see page 66) can reduce the flicker.
25
TO PLASMA
USE THE MONITOR
REMOTE
TO CONTROL HOW
YOUR
Vertical picture position can be adjusted for [Panoramic], [Zoom] and [Cinema] mode as follows.
1. Press ZOOM button and A,V SELECT buttons during picture size display.
2. Position display will appear.
3. Adjustment range of each picture size are as shown below.
[Panoramic]
- 12 to + 12
[Zoom] and [Cinema]
- 31 to + 31
4. When 1080i/50 or 1080i/60 component signal is received, vertical position can be adjusted only one step up. (The range: 0 to 4-1)
Position
+ 31
Press A
USING A WIDE=SCREEN
NOTES:
Press T
MONITOR
1. This monitor has a screen mode selection feature. If an incompatible screen mode is selected to play certain software,
such as a TV program,the image would appear different from the original. Take this into consideration when making
screen mode choices.
2.
3.
Use of this monitor in its enlarged display mode with the wide feature enabled in coffee shops, hotels and other
establishments for commercial or pubic viewing purposes could infringe on the copyright holder's right protected by
Copyright Law.
When a normal 4:3 image is displayed over the entire screen in the Panoramic mode, parts of the periphery of the
image may disappear and/or appear distorted in some cases. Use the 4:3 mode to view images, which were created
in 4:3 mode. This mode allows 4:3 content to be viewed without picture distortion.
CHANNEL SELECTOR buttons
The CHANNEL SELECTOR buttons are used to select channels, lock access code, etc. Use the CHANNEL SELECTOR buttons
to enter one, two or three numbers to select channels. Enter "0" first for channels 1 to 9, or simply press the single digit channel
you wish to tune then wait for a few seconds for the TV to tune. Enter "1" first for channels 100 and above, wait for a few seconds
......................................
till the 3 digit channel display icon appears then press the next 2 digits to completely tune the channel.
O
VmDEO (AV1 to AV4) / RGB (RGB1 and RGB2) buttons
Press these buttons to directly access the desired Input.
C.C / TEXT buttons
Press these buttons to directly change the Captions Mode to Captions and Text.
26
MULTi PICTURE (PinP)
The Multi Picture feature is convenient when you want to watch more than one program at the same time. You can watch a TV program
while viewing other programs from any of the video inputs.
RECALL
;
![;
....
[i;
button
............
i!...............
i
SELECT
buttons
I
W
--
MULTI
button
PICTURE
"_
MULTI
button
MODE
\"
A/B button
®®
_o
VCR
©@@
®@@
©@@
PROGRAM UP/DOWN==EZ
buttons
0000
•
iLx
,,s_2
0000
Use above connection to view VCR program as a sub-picture while viewing another program as main picture (ANT, AVl, AV2, AV3,
AV4, RGB1 or RGB2).
Displaying MULTI PICTURE
If the MULTI PICTURE button on the remote control is pressed, multi pictures will display. And then three types of the screen can
be selected by pressing the MULTI MODE button on the remote control. The multi picture mode will change in the following
sequence each time the MULTI MODE button is pressed.
2 pictures
(Split)
-----_4 pictures
-----_12
pictures
q
Activating the Split mode from the TV screen
Pressing the MULTI PICTURE button one time will display 2 pictures.
,,
,,
,,
,,
,,
,,
The
can bethe
shifted
left and
by pressing the A/B button; the audio will be output
from speaker
the side icon
on which
speaker
icon right
is located.
The same signal input cannot be selected for both screens at the same time.
The TV channel can be changed by pressing the ,& and _ PROGRAM UP/DOWN buttons on
the remote control.
The same signal input mode cannot be selected for each screens at the same time.
Pressing the MULTI PICTURE button at the 2 picture mode will cancel the multi picture mode.
And then, pressing the MULTI PICTURE button again will display the 4 pictures.
Refer to the table for 2 pictures mode.
2 Pictures
ANT
AVl-AV4
AVl,AV2
576i
_b
NTSC-M
ANT
NTSC-M
AV1-AV4
NTSC-M
AV2
RGB1
RGB2
_C_
(Split)
Input terminal
AVl,
A
576i,
576p
NTSC-M
576p 480p 1080i/50 1080i/6¢i720p/6C
O
O
©
O
O
O
O
O
O
©
©
©
©
O
O
480i, 480p
O
O
1080i/50
O
O
1080i/60
O
O
720p/60
O
O
O
O
RGB1
RGB2
STB
Component
480i
Sub
Main
STB
Component
O
O
O
O
O
(O : Available)
27
MULTi PICTURE (PinP)
Activating the 4 pictures mode from the TV screen
Pressing the MULTI MODE button one time at the 2 pictures mode will display 4 pictures.
,,
Press [A/B] button to select picture A or picture B indicated by a red triangle. For pictures on
right, press ,& _ SELECT buttons to select picture. The selected channel number would
change green.
,,
The TV channel can be changed by pressing the A and T PROGRAM UP/DOWN buttons on
the remote control.
,,
The audio can only be output from picture A in 4 pictures mode.
,,
The same signal input mode cannot be selected for each screens at the same time.
,,
Pressing the MULTI PICTURE button at the 4 picture mode will cancel the multi picture mode.
And then, pressing the MULTi PICTURE button again will display the 4 pictures.
,,
Refer to the table for 4 pictures mode.
T
A
B1
AVI
B2
AV2
B3
AV3
4 Pictures
Input terminal
ANT
NTSC-M
AV1-AV4
NTSC-M
AVl,
AV2
576i,
576p
ANT
AVl-AV4
NTSC-M
NTSC-M
AV1, AV2
RGB1
576ip 480p
480i 1080i/50 1080i/60 720p/60
576
STB
RGB2
Componen
©
O
©
O
O
O
O
Main
480,48op
o o
1080i/50
10 0iJ0o
o o
RGB1
720p/60
STB
O
RGB2 ComponentO
O
O
(©: Available)
_
Activating the 12 pictures mode from the TV screen
Pressing the MULTI MODE button one time at the 4 pictures mode will display 12 pictures.
,,
Starting from channel 1, preset channels will automatically display in sequence on the 12
windows.
,,
This function activates only in TV mode.
,,
After several seconds, it refreshes the picture one by one.
*
Pressing the MULTi PICTURE button at the 12 picture mode will cancel the multi picture mode.
And then, pressing the MULTI PICTURE button again will display the 12 pictures again.
,,
Pressing the MULTI MODE button at the 12 picture mode will display the 2 pictures
(Split) mode.
NOTES:
1
2
3
4
5
6
z
8
9
10
11
12
1. Even if the input of the horizontal / vertical synchronizing signal (or video signal) stops in the multi picture display, the |
mode will not change to power save mode.
2. Please be careful since image retention will occur if display is left in a multi picture display state for a long period of
time
J
28
MULTi PICTURE
Displaying
MULTI
if the PinP button
PinP
PICTURE
on the remote
control
is pressed
O oINRIJI
RECALL
0
MULTI PICTURE
MULI:PIC'o
m
will display.
PinP button
RECALL button
A/B button
MENU
RETURN
= RETURN button
SELECT button
®®
®®
Activating the P=in-P mode from the RGB input screen
Pressing the PinP button one time will display 2 pictures.
.
This mode can be available from RGB1 (DVI-PC) and RGB2(RGB) Input.
,,
The speaker icon can be shifted up and down by pressing the A/B button; the audio of the video
will be output from the side on which the speaker icon is located.
,,
The sub-screen position can be selected up and down by pressing A and _' SELECT buttons.
,,
The sub-screen can be selected with the AVl, AV2, AV3, AV4 and TV channel number buttons
from the status that the speaker icon appears on the left side of AV* as shown in the diagram
to the right.
,,
Pressing the PinP button again or the RETURN button will cancel the 2 pictures display.
,,
"Frequency Mode" in the Setup Menu should be set to Movie when sub-screen is the
component signal of [email protected]/50 or 1080i/60.
AV1. Displays the WDEO input signal of the sub-screen.
Activating the Split mode from the video input screen
Pressing the PinP button one time will display 2 pictures.
,,
The speaker icon can be shifted left and right by pressing the A/B button; the audio of the video
will be output from the side on which the speaker icon is located.
,,
The same video input mode cannot be selected for both screens at the same time.
,,
Pressing the PinP button again or the RETURN button will cancel the 2 pictures display.
,,
When the Video input is set to RGB Video, this Split mode is not possible.
,,
Refer to the table for 2 pictures (Split) mode.
29
@) AVl
MULTi PICTURE (PinP)
Picture
Freezing
POWER
PICTURE
AUDIO
©ooo
INPU
RECALL
0000
MPX
MENU
SURROUND
t_1ULT PIC
RETURN
FREEZE button
©®®
®®®
©®®
®®®
©©©©
© DO
...........
d
iiiiiiiiiiiiiiiiiiiiiiOi!iii!
iiiiiiiiiii!i!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiZ!i!ili
iiiiiiiiiiiiiiiiiiii_i!iiiilililililiiii:i!i!Oi
_
iiiiiiiiiiiiiiiiiiiiiiiiiiii!iiiiii_ii:;!!
i!!!!!!i!i!i!i!i!i!i!i!i!i!i!i!!!_i!ii!
iii
i!iiiiiiiii!ii!i!iiii!i!i!i!i!i!i!i!ii!!iii!_i
When the FREEZE button
,,
,,
,,
,,
,,
on the remote control is pressed, the screen transfers into the freeze mode.
There are two types of freezing screen mode, Split and Strobe. These are possible to select
at the "Freeze Mode" setting of the Function Menu.
The Split mode will display 2 pictures from the same source on the screen with one active
picture and the other still.
The Strobe mode will display 12 pictures with the last picture active, while other 11 windows
are still.
Pressing the FREEZE button again changes the screen back to the normal picture.
This function is also available from video input mode besides TV mode. Refer to the table for
Freeze function as below:
[Split]
A
B
[Strobe]
Split
Strobe
NTSC-M
O
O
576i
O
O
480i
O
O
576p
O
480p
O
1080i / 50
O
1080i / 60
0
720p / 60
O
RGB, DVI-PC
( O Available)
3O
1
2
3
4
5
6
7
8
9
10
11
12
Active
HOW TO USE THE REMOTE
TO CONTROL DVD FUNCTIONS
._
DVD Player SeJectJon
You can use this remote control to operate the selected brand of DVD player by pressing the following buttons on the remote control
simultaneously.
Press
Brands of DVD Player
Hitachi
[RECALL}
Pioneer
[ RECALL
Panasonic
[RECALL]
Toshiba
]RECALL
Philips
]RECALL
JVC
[RECALL]
Samsung
RCA
}
RECALLI
RECALL]
®
Mitsubishi
@
Onkyo
IRECALL
I I AV1
Zenith
[RECALLJ
L
AV2
@
Orion
[ RECALL
I [
AV3
@
Shinco
]RECALL[[
TEXT
Skyworth
]RECALL[[
AV4
Bubuko
[RECALL][
C,C,
@
Example
To operate HITACHI DVD player, press and hold the RECALL button, followed by the l_button.
RECALL
button
©@@
®@@
@@@
@®
AVl
button
C.C. button
TEXT
NOTE:
®
@
RECALL I
Sony
Press
Brands of DVD Player
O0
AV4 button
button
Not all models of the listed brands can be operated using this remote control.
31
]
[
J
J
J
I
OSD (On-Screen
1. Press MENU on the remote control to display the different features on your HITACHI Plasma Display Monitor.
2. Use the CURSOR buttons and the OK button to navigate to a different menu item.
3. Use the RETURN button to navigate back one On-Screen
Display at a time.
4. Press the MENU button again on the remote control to quickly exit from a menu.
MENU
RETURN
®
@
VOL=
This part of the screen shows
which selections are available.
L
I
Audio
I
ITimor
I
IFunction
I
Is ....
|
I
I
L°cks
ICaP
I
ti°ns
Language
I
I
Select
LF_sot
j] _This
part of the screen
shows which Remote
Control buttons to use.
iiiiiiiiiiiiiiiiiiiiij_i
iiiiiiiiiiiiiiiiiiiii_;_i_iii!i
HrrA_HI
0 _:_
iiiiiiiiiiiiiiiii,!_i!Jii!_iii:ii
/
iiiiiiiiiiiiiiii_;!iiii:i:i:i_;!_i_i_i_
iiiiiiiiiiiiiiiiiiiiiiii';!_iWi_;ii
iiiii'i_iiiiiiiiiii:ii!;i!;!iiiiiii_:i_!iiii_!
iiiiiiiii'i_!iii:ii:ii!;i!;iiiilili!,!ii_iiii_:i
iiiiiiiiiiiiiii_i_iiiiiii!!!i!i_ii_ii!
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i_Q!i_i
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii ii ii i! i! i! !i!
32
Dis la )
OSD (On-Screen
Dis la )
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
Color Temperature
Pi ctu re
Day and Night.
Adjust color.
Adjust sharpness.
Adjust tint.
Set this to Cool for less intense color with more blue, set to Normal
for natural color, set to Warn for standard colors or Black and
White for more reddish color.
Contrast Mode
Reset
YNR
CNR
Film Mode
Adjust Contrast automatically.
Reset/Restore
to original factory settings.
Adjust to reduce picture signal noise.
Adjust to reduce color signal noise.
Turn ON/OFF the 3:2 Pulldown detection feature.
PAL Comb
Function
Filter
not available
(grayed
out)
LTI
CTI
Black Enhancement
Adjust the sharpness of the picture signal.
Adjust the sharpness of the color signal.
Use this function to enhance the shadow detail in dark scenes.
Auto Color
The AUTO COLOR function automatically
monitors and adjusts the
color to maintain constant color levels even after a program or channel
changes. It also maintains natural flesh tones while preserving fidelity
of background colors.
Reset
Reset/Restore
to original factory settings.
Select ON/OFF to change color temperature
depending on the user's
preferences.
Adjust and balance individual colors to make either deeper or more
pure according to preference.
Color Temp. Adjust
Color Management
Audio
Select between the two picture modes;
Adjust contrast.
Adjust brightness.
Color Decoding
Adjust
Audio Mode
Treble
Bass
Balance
Select preset Audio
Adjust the treble.
SRS TruBass
Matrix Surround
Perfect Volume
Reset
the percentage
of Red, Green
and Color according
Modes.
Adjust the bass.
Adjust the balance.
Select SRS settings (Off, Wide, Normal).
Select Matrix Surround (On, Off).
Adjust volume in fixed setting.
Reset/Restore
to original factory settings.
33
to preference.
OSD (On-Screen
Off Timer
Ti me rs
This function automatically
sets the power to standby status when the
indicated time period has elapsed.
This automatically
sets the power from standby to ON when the indicated
time period has elapsed.
On Timer
Screen Saver
Function_
Set Screen Saver to prevent screen burn.
Select Screen Wipe function.
Set the gray side bars on/off when watching 4:3 signals in standard mode.
Set to reduce power consumption
for video input when there is no video input.
Screen Wipe
Black Side Panel
Video Power Save
Freeze Mode
Default Zoom
Mode Display
ID Number
Inverse
Select freeze between split (2 pictures) and strobe (12 pictures).
Select the screen display size (default).
Set to suppress the contrast to extend panel life.
Not Available (grayed out)
Not Available (grayed out)
Not Available (grayed out)
Standby
Gamma
Reset
Not Available
Not Available
Reset/Restore
Panel
Life
White
Input)
Setup
AVI~AV4
.=========_
Input)
System
Color System
Video Input
Audio Input
Set
Set
Set
Set
Scart Output
RGB1
RGB2
Set Scart Output to TV/or Monitor
Set to DVI-PC or DVI-STB.
Change Access
Engage Lock
Movie Ratings
Locks
Code
TV Ratings
Canadian
Ratings
(ENG)
Canadian
Ratings
(FRN)
iiiiiiiiiiiiiiiiiiiii!
iiiii![!i_
to System 1 (European/Asia)
Color System
Video input signal.
Audio input signal.
Set to RGB or Component
iiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiii'
Captions
(grayed out)
(grayed out)
to original factory settings.
Select Source for Auto Channel tunning.
Select Source for Manual channel tuning.
Adjust to fine tune the channel after Auto or Manual
Set Plasma TV to Auto power Off (On/Off)
Tuning
Setup
(Antenna
Set Menu options
to English,
(Auto, HDTV, SDTV/DVD).
types of movies and television
ratings.
types of movies and television
ratings system.
types of movies and television
the Canadian
French
iiiiiiiiiiiiiiii_;!iiii:i:i:i_;!_i_i_i_
Lang uage
iiiiiiiiiiiiiiiiiii'i_ilWi!_i
System 2 (North America)
Block various
parental guide
Block various
the Canadian
Block various
ratings system.
t Set
Set to
to display
OFF/ON/AUTO
dialogue/text.
[Captions
tuning.
Change Lock access code.
Choose to lock channel, video input, and/or front panel.
Block various types of movies and video types based on motion
picture ratings.
_Display
_
Display)
French
or Spanish.
iiiii'i_iiiiiiiiiii:ii!;i!;!iiiiiiJ:i_!iiii_!
iiiiiiiii'i_!iii:ii:ii!;i!;i[ili!,!ii_iiii_:i
iiiiiiiiiiiiiii i iiiiiii!!!i!i ii ii!
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i_Oiii_il
34
programming
based on a
programming
based on
programming
based on
PICTURE
Pi
C1[U
Pi cture
Select PICTURE to adjust picture settings and improve picture quality. You can independently customize each of
the Video Inputs to your preference to increase viewing performance and pleasure depending upon the video
program being viewed. If RESET is selected, only the selected input will reset to initial conditions.
re
Node
Use this function to choose from automatic picture settings to optimize your TV's performance.
|
|Aoa_o
llx_
,,,o
,MENU
|
|
_Functlon
ll_etup
II_ Lodes
m
]E
Select
l_Set
..........
i_!_!_i_:_,,_
<!iiii;ii_:
_
_iii_!;
_¸'¸_¸¸
........
I
_
Ne×t/Prev
Use CURSOR buttons _1or I_ to select Picture Mode settings.
Function
Contrast
Day
Night
Reset
4- 31
+ 10
Reset the video
0
menu settings on
current input to the
Day or Night
conditions depending
Brightness
Color
+ 5
4- 3
- 10
Sharpness
Tint
+ 5
0
- 5
0
Color Temperature
Cool
Warm
on the selected
Dynamic
Normal
PICTURE mode.
High
Low
Off
Off
Contrast Mode
YNR
CNR
Film Mode
Off
Off
Not Available
Not Available
LTI
Middle
Off
CTI
Middle
On
High
Off
Off
Off
PAL Comb Filter
Black Enhancement
Auto Color
Press MENU to quit menu or press the RETURN button to return to prewous menu.
35
4.
Select
(_)
Return
I
PICTURE
m
|
MENU
_Function
m
|so_.p
|
,_
Select
|
mco_o_
Xsh.,_....
Xr,.t
| F, s i
| [, s i
| [ o I
II.....
la [ .....
m
m
m
11
I1
I]
]
Set
Use the CURSOR buttons ,A. or T to highlight the function to be adjusted.
Press the OK button to select the function settings.
Press the CURSOR button _1 or I_ to adjust the function.
Press the RETURN button to navigate back one On-Screen Display at a time.
Press MENU to quit menu.
Contrast
]
Use this function to change the contrast between black and white levels in the picture.
Brightness
j
Use this function to adjust overall picture brightness.
[
Col or
i
(
[
(
Use this function to adjust the level of color in the picture.
Sharpness
I
Use this function to adjust the amount of fine detail in the picture.
Tint
I
Use this function to adjust flesh tones so they appear natural.
Color
Temperature
Contrast
Mode
))))))))))))))))))))))))))))))
........
Black
Enhancement
i
)
Set this to Cool for cooler color with more blue, set to Normal for more natural color, set to Warm for
accurate color or set to Black/White for more reddish color.
Use this function to choose between 3 Contrast Mode settings. Set to Dynamic for darker images more
in the level of Black, set to Normal for a balanced White to Black level, and set to Auto for automatic
Contrast selection.
i
Use this function to enhance the shadow detail in dark scenes using the settings off, low, middle and high.
iiiiiiiiiiiiiiiiiiiii_
NOTES:
)))))))iiiiBii:ii:ii_;i!_
)))))))iiiiiiiiB_
1.
If CONTRAST is selected, you are adjusting CONTRAST. The additional menu items BRIGHTNESS,
and SHARPNESS can be selected and adjusted in the same manner.
2. It may be necessary to adjust TINT to obtain optimum picture quality when using the COMPONENT
input jacks.
ii'ii [email protected] !i
iiiii'i_iiiiiiiiiii:ii!;i!;!ili3_
iiiiiiiii'@iii!,!ii_
iiiiiiiiiiiiii'i i ;iliiii!!!i!i iiiii!
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii i Oiii i)
36
COLOR, TINT,
VIDEO Y-PBPR
PICTURE
Reset
Video
Settings
l This function allows you to Reset the Video Menu Settings of the present input to original factory settings.
m pi cture
mPicture
mP_cture
|Contra
_gr
M
mP_ct_re
DaY
Mode
I(co._,_
t
O I
_ghtnes
Im
I
_ S I
m
I
O I
IM
I
mBrlghtlle
Mode
m
t
Day
II
_31
I
Vim
o I
S
Im
I
IM
I
mColor
II r,,_t
mCol
_Co.t
I!1
or
Fe.
rast
peratur
8l,_ck/Wh
e
II_,*,t
_te
_Co]
Dynamic
Mode
mCo.t
or
I!
Fe.lper
rast
atur
o
I
81,_ck/Wh
e
Dynat,,
Mode
_ te
c
Reset
|_a: _ .......................................................................
[
_
Select
@
Exit
Returr_
[ _ s_l_t
_
R_tur_
s_t
Use CURSOR buttons to highlight functions.
Press the OK button to set the Reset Video Settings.
Use the CURSOR buttons T to access other video settings.
You can customize each of the Video Inputs to your preference to increase viewing performance and pleasure, depending upon the
video program being viewed. If RESET is selected, only the selected Input will reset to the initial conditions as explained above.
If RESET is selected in AVl Input, only AVl Input will return to factory conditions.
I1-_,,,Modo
| [ o_
I1_
I_
| [ _o_
| [ M,dd_
Ill
[ _ select
[ o_
_[Picture
_color
_Color
IColor
recap.
I_ [
_
set
_
......
_eturn
]
Adjust
Managenlent
Decoding
|
_[:_Tt ......................
_
.........................._/_' ..........................................
I
i NOTE:
YNR
Set to reduce picture signal noise reduction.
CNR
Set to reduce color signal noise reduction.
When selecting DVPSTB mode, CNR will automatically
37
be set to off.
]
PICTURE
(
Film
Mode
I
he Film Mode
function
turns
the 3:2 orPULLDOWN
Theatrical
movies
are shot
on ON
film orat OFF
24 frames
still pictures DETECTION
per second, SPECIAL
instead of FEATURE.
30 frames or 60
fields like video. When film is transferred to video for television viewing, the disparity between the two
frame rates must be reconciled. This involves a process known as 3:2 pulldown.
When Film Mode is turned ON from the VIDEO menu, your Hitachi Plasma Television will activate the
circuitry for this special feature to improve video performance when watching film based sources.
NOTES:
1. When using Progressive Scan Component or DVl input (Ex. 480p, 720p), Film Mode will not be available (grayed out).
Please see table below for additional information.
2. All Video settings are independent of each other based on it's input (ANT, AVl -AV4).
I
PAL Comb Filter
I
This function will not be available (grayed out).
i
LTI
I
Set to adjust the sharpness of the picture signal.
i
CTI
I
Set to adjust the Sharpness of the Color Signal.
I
Use this function to enhance the shadow detail in dark scenes.
I
The
automatically
and adjustsnatural
the color
maintain
constant
color fidelity
levels
evenAUTO
after aCOLOR
programfunction
or channel
changes. monitors
It also maintains
fleshto tones
while
preserving
of background colors.
i
Black
i
Enhancement
Auto
i NOTE:
i Color
Color
When using Component or DVI-HDTV input, Auto Color will not be available (grayed out).
Temp.
Adjust
! Set to change color temperature depending on preference. Adjust Amplitude to increase/decrease colors
Red, Green, Blue in Brighter scenes. Adjust Cut Off to increase/decrease
Red, Green, Blue in Dark
scenes.
_Picture
mcol_
Temp_
mcolor
M.u,._ge, e)_t
_Color
Decod
[ _ select
Adju
U
T_mp.
_Ce)or
im
]
On
Amplitude
h,g
m
(_
A_JUS_
set
0 [_
Red
_
Green
Return
0
o [_
Blue
.........
iiiiiii!_il)!i_
_
={!ii¸_¸¸_¸¸¸¸¸¸¸¸'¸¸cut
off
Red
0
Green
O
Blue
0
m.....
[
Press
Press
Press
Press
i
CURSOR buttons _, _ to set to On/Off.
CURSOR buttons A, T to select color options.
the OK button then use the CURSOR buttons 4, I_ to adjust settings.
the MENU button to exit.
38
_
Select
E_
|l
_
On/Off
.....
(_]_]
Return
PICTURE
Col or
Management
Use this function to adjust and balance the listed individual colors to make them either deeper or more
pure depending on the user's preference.
Jp_ctur_
mColor
renlp.
_Color
[
_
|
[ D_y
Decoding
Select
_Pi cture
U
Adjust
M_genta
m
_
Set
C_
Return
_40
Red
_33
Yellow
_26
Green
_30
Cyan
_22
Blue
_4o
II!1
_
On/off
_
.....
Return
Use the CURSOR buttons 41, I_ to set On/Off.
Press the CURSOR buttons 4, t_, T, A, to highlight and adjust individual colors.
Use the CURSOR buttons to highlight and select "Reset" to return all colors to default settings.
Col or
Decodi
ng
Use this function to adjust and balance the percentage of Red, Green and Blue according to the user's
preference in each of the four color temperature settings. Use TINT to adjust flesh tones so they appear
natural.
_Color
remp.
Ad}ust
_Co]oP
M./_l./ge,
ellt
_Pi cture
U
® RG8
[
_
Select
_
Set
C_
Returr_
.........
iil)iii!_i;i!ii_
(_
=i)))
_i_i::¸_;¸¸¸
......
O
R
O G
Red
_33
Green
_33
Color
_
tint
O
B
5
O
[
_
On/Off
Reset
_
Return
]
]
Use CURSOR buttons to highlight function.
Press the OK button to select from 4 menu items.
Press CURSOR buttons _1, I_, V, A, to highlight and adjust Red, Green, Color and Tint.
Use CURSOR buttons to highlight and select "Reset" to return all settings to default.
NOTE:
Color Decoding settings are independently
stored in each of the 4 Color Temperature settings.
39
i
AUDIO
Aud i o ]
Select AUDIO to adjust the TV to your preference and to improve tile sound quality.
_Pi
MENU
cture
_Aud
M
|Ti me
r
|
IFunction
|
|sotu,,
|
II.....
Select
[
_
Select
| [
[_
Returrl
[_
.....
Exlt
]
]
Set
Press CURSOR buttons A, T, to select menu item.
Press CURSOR buttons _ or I_ to adjust the function.
Press EXIT to quit the MENU, or select Audio to return to the main menu.
J
Audio
j
Mode
i
i This function controls the high frequency audio to all speakers.
Treble
Bass
j
Balance
NOTE:
Use this function to choose from automatic audio settings to optimize your TV's performance.
i
This function controls the low frequency audio to all speakers.
i
This function will control the left to right balance of the Plasma TV internal speakers.
If TREBLE is selected you are adjusting treble. The additional menu items Bass and Balance can be selected and
adjusted in the same manner.
$_(0)
TruBass is an audio enhancement technology from SRS Labs that provides deep, rich bass on any speaker system without the need
for a subwoofer or additional extra physical components.
For systems with a subwoofer, TruBass complements and enhances the
bass performance. This feature can be set to Off, Low, Medium and High.
iiiiiiiiiiiiiiiiiiiiii
[,o,,s:
j
iii,i _
(i iiiiiiiiiii!ii!ii
Perfect
vol°oeThisfunotionwi,automatioal,yadjustvolumesoeachcha
andinputhasthesameav
)_'i_;;;;!i!iiiiiiiiiiiiiiiiiiiii!_?_
iiiiiili!iiiiiiiiiiii!ii!i!iiii!i!i!i!i!i!i!_
lReset
1 Reset/Restore
to original factory settings.
iiiiiiii)_;i:ii:ii:ii!il)!i!i!i!)_i_
iiiiiiiiiiiiii'i_i_iiiiiii!!!i!i_iiiii!
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i_Oiii_i)
40
TIMER
Ti
me r'
use this function to set the power to standby status and from standby status to ON.
_PI
MENU
cture
|
U
|.oa_o
|
(F..ctio.
|
I_
_Lod<s
|._ptl ons
|L.ngu_go
|
|
Select
Set
Press
Press
Press
Press
Press
CURSOR
CURSOR
CURSOR
CURSOR
the MENU
buttons A, T to select
buttons ._, _ to select
buttons _, I_ to select
buttons A, T to adjust
button to exit.
options.
OFF Timer settings ( - -, 30, 60, 90, 120 min).
hour or minute of On Timer settings.
On Timer settings.
41
Select
(_
Retur_
_
EXit
I
FUNCTION
Function]
Select Function to set the listed options.
MPI
_Ti
me
|
r
|
|sotup
MENU
m_
cture
|Aud_o
|
_Lod<s
I< ....
_ I
<....
Select
Set
II...... ,_,
la [ •
11
.......
11
.....
la [=.=
m[
]
]
]
.....
Press CURSOR buttons to highlight and adjust options.
Press the MENU button to exit.
Screen
i
i
[
Saver i
Screen
Wipe
i
Continuous on-screen displays such as video games, stock market quotations, computer generated graphics, and
other fixed (non-moving) patterns can cause permanent damage to the Plasma Television. Use this feature to
move the picture around the screen in small amounts, at set intervals, to reduce the panel image retention.
This is used to reduce the panel image retention that can occur with stationary pictures by the white field signal.
Select On (continuous operation) or 60 Min. (time limit operation) and press the OK button. When the 60 minutes
option is chosen and the 60 minutes elapses, the Plasma television will automatically set to standby mode. Press
the MENU or RETURN button on the remote control to return to normal viewing.
This turns the gray sidebars On/Off when watching normal mode screen size area. It is always set to Off when the
monitor powered On. It is recommended to set to Off to reduce the panel image retention.
Panel
Black
Side
iiiiiiiiiiiiiiiiiiiiiiiiiii iii!iiii!i!i!
iiiiiiiiiiiiiiiiiiiii!8
i Video
Po.er This is used to reduce power consuption
for video input when there is no video signal. Setting it On will leads the
monitor to the standby mode when the AV input with no signal is selected.
)))))))))))))))_)_)_))))_
_
Save
iiiiiiiiiiii)i)iiiiii!iiiiii);ii_
( Freeze
Mode ( This selects the display condition of the FREEZE mode between Split (2pictures) and Strobe (12 pictures).
)))))))))))))))))))')_i_
)))))'i_i)i))i))i)):))!;));))))))))):)_
)))))))))_)];))))))):)iJ))))))))_
))))))))))))),)_)))i))))i)i)!)!iil
_ (Default
Zoom l This selects the screen display size that appears first when the power is turned on.
Reset
)
The original factory settings for the items of this Menu page can be restored by pressing the OK button.
42
FUNCTION
i
Life
i
This function is to suppress the contrast of the screen regardless of the Contrast setting in the Picture Menu. By
this control, power consumption can be reduced or degradation of a panel can be mitigated. The order of power
consumption is Extend 2 < Extend 1< Normal.
If the Contrast setting is changed when this item is set to Extend 1 or 2, it will be changed to Normal automatically.
I Mode Display
I
Not Available (grayed out)
I
I
Not Available (grayed out)
i
Not Available (grayed out)
I
Panel
ID
Number
Inverse
IStandby
Whitel
Not Available (grayed out)
i Oa°°a
j
Not Available (grayed out)
43
SETUP
[ so :oi
the remote to highlight the function desired.
_PI
cture
J_,,,o,NFu,lctio,1
MENU
|
U
|
11..... _
|
|
mF {r,_
I
_Lod_
_
Itl
ru.,r,g
Select
@
Returr_
[_
Exit
s
BCaptions
BL_nguage
,_
(_
Select
Set
Press the CURSOR buttons to select the Sub-menu
Press the OK button to select.
Auto
Tuning
i
of your choice.
Select Antenna input options from Air, CATVl and CATV2.
|
_Setup
|
11..... _
I
I!!
m_e
m
run_g
H_zo off
E _
Select
]
la I of_
@
Return
[_
I
_
Select
C_
Return
_
]
Exit
EXit
Use the CURSOR buttons (T, A) to select the source.
Use the CURSOR buttons (4, I_) to change the source from Air, CATVl and CATV2.
Press the OK button to set.
Use the CURSOR buttons to select the search option.
mSetup
m_
.....
m
U
HSetup
| E_....
|
]
Scannlng
m
::::::::::::::::::::::::::::::::::::::
iiiiiiiiiiiiiiiiiiiiij_i
Cance_
iiiiiiiiiiiiiiiiiiiii_:_:ii!i
iiiiiiiiiiiiiiiii,!_i!Jii!_iii:ii
Press OK to CANCEL
Press the MENU button to quit the menu.
iiiiiiiiiiiiiiii_i!iiii:i:i:i_i!_i_i_i_
iiiiiiiiiiiiiiiiiiiiiiii'i!_iiWi_ii
iiiiiiiii'i_!iii:ii:ii!_i!_iiiilili!,!ii_iiii_:i
iiiiiiiiiiiiiii i iiiiiii!!!i!i ii ii!
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i_Q!i_i
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii ii ii i! i! i! !i!
44
Chaiqnel
Number:
23
]
SETUP
[
i
Manual
Select this feature to manually tune each channel.
mSetup
|
U
II..... _
_Chan.el
mF
_*_e
tuning
[
_
Select
IN I of_
@
Returr_
[_
_
II....
Ilco_o,5_......
m
IIA_toof_
It
Nu.be_
]
]
]
]
]
]
[ 3S
| [
II [ ....
Exit
I1._
[
_
| [ off
Select
(_
Returr_
C_]
Exit
Use the CURSOR buttons (V, A) to select other sub-menu items.
Channel
i
Number
Use the CURSOR buttons (4, t,_)to set the channel numbers.
Name
Use the CURSOR buttons (V, A) to edit and enter channel name.
Color System
Use the CURSOR buttons (4, t,_)to set and choose between 2 different Color System settings (Auto,
NTSC-M).
Skip
Use the CURSOR buttons (4, t_) to set. If this is set to ON, that channel will be skipped while using the
channel CH+ (A) and CH- (T) buttons. Skip is automatically set to ON for those non-broadcasting channels
after channel search has been made.
NR
Use the CURSOR buttons (_1, t_) to set. If this is set to ON, it helps to reduce the noise interference visible
on the screen especially in the weaker signal reception areas.
Fine
Tuning
i
This
feature is used to adjust the frequency data for the tuner depending on the user's preference.
_Setup
IA_to
r_
m
Select
|
|Rut° of_
[
_
Select
_Adjust
_
Return
]
m I°f_
_
Return
[_
EXit
Use the CURSOR buttons (_1, I_) to adjust frequency data.
Press the Menu button to exit.
i
Auto
Off
II
If
set to in
ON,
minutes
thethe
TV power
mode. will be turned off when there is no transmission
45
signal and no operation for about 10
SETUP
Setup
i
Select SETUP when setting up your TV for the first time in AVl, AV2, AV3, AV4input.
A or _ on the remote to highlight the function desired.
|
_Picture
Use the CURSOR buttons
|
m
mSystef_
MENU
|_,,,o,-
|
_F_n_tion
|
mcolor
_Vldeo
_o
Ihput
msc_,
.......
m....
m....
_Locks
_Captions
|
i
•
rv
DVI
PC
RGB
Auto
[ _ select
System
System
m
|
!
|
I!
|
ef_
Input
_Aud
|
| .........
Syst
Select System 1 for Europe/Asia,
(_
Return
(_
EXit
System 2 for North America.
_Setup
msystem
_Col
or
mV_deo
_Aud
System
5y_t
•
ell}
input
io
_Scart
Ihput
rv
Output
I ....
I!
DVI
PC
RG8
Auto
[ _ select
_p
set
[]_]
Return
Press the CURSOR buttons 4 or _ to set.
[Color
System
i
Select the Color System that corresponds to the color system of the signal from the equipment that is connected
to the corresponding Video input terminal (AV1, AV2, AV3 and AV4). Set to Auto for automatic signal detection.
_Col
or
N:
[
_
Select
5yste_l
AVZ
Auto
AV2
Auto
AV3
Auto
AM4
Auto
_
Return
Use the CURSOR buttons (T, A) to select the Video Input.
Use the CURSOR buttons (_1, _) to set Color System.
NOTES:
1. Normally set to Auto to automatically
recognize the signal.
2. When a component signal is received, the Color System and Auto Color options will be grayed out.
3. PAL, SECAM and NTSC 4.43 signals are not available in North America.
46
_]
Exit
]
SETUP
i
Input
Video
IJ
Select the Video input that corresponds to the signal mode of the signal from equipment that is connected
corresponding video input terminal (AVI, AV2, AV4).
mColo_
to the
sy_t e_,_
AV1
Auto
AV2
C_pO
S _t
e/C_}[3on
er_t
AUto
AV4
E _
Select
C¢_}pOS
(_D
_t_
Return
[]_
EXit
]
Use the CURSOR buttons (T, A) to select the Video Input.
Use the CURSOR buttons (4, I_) to set the Video Input.
AVl:
AV2 (1st Step):
AV2 (2nd Step):
AV4:
NOTE:
Auto, HDTV, SDTV/DVD
RGB, Composite/Component
Auto, HDTV, SDTV/DVD
S-Video, Composite
The RGB signal will be automatically
recognized.
1
i
Audi
o
Input
IJ
Select the Audio input that corresponds to the Audio signal from equipment that is connected to the corresponding
audio input terminal (AVI, AV2, AV3, AV4).
_[Set
|
up
_Aud
II
_
II.....
[
_
Select
@
[
]
[ ....
]
[_
Exit
]
Use the CURSOR buttons (T, A) to select the Video Input.
Use the CURSOR buttons (_1, I_) to set the Audio Input.
i NOTE:
Scart
If the Audio Input is a monaural sound, set to L/Mono.
Output
RGB1
i Set to TV or monitor.
i Set to DVI-PC or DVI-STB.
RGB2 (].st
Step)
i Set to RGB or Component.
RGB2 (2rid
Step)
i Set to Auto, HDTV, SDTWDVD
Ihput
]
I!1[ .... _
Returl]
_o
47
I
_
Select
@
Returr_
C_)
Exit
I
LOCKS
L O C I,I£ S
This function will block out the picture and sound of the selected channel or video input.
t can a so be used to keep the TV from be ng v ewed for a schedu ed t me per od that you set.
The code to enter the Locks feature is a four digit access code number.
Use the number buttons to enter the access code.
The factory preset code is 0000.
IPicture
Please
_F_tio_
Enter
Access
E
|,_ption,
3
|
EO
IL_nguag
Code
9]
Enter
Code
e
Select
O_oKjSet
dD
|Lock
)|
ILhang_
Access Code
IEng_ge
Lock
I_ovie
Ratings
| .........
Ic_n_d_n
Ic_n_d_n
E _
"ove
m
|
R_t_ngs
(Eng)
_at_ngs
(Frn)
_
Retur.
]
Use the CURSOR buttons A or T to highlight function and then press the OK button.
To change the access code number, select Change Access Code. Enter a new four digit number.
Select CHANGE ACCESS CODE to change the factory preset code (0000) to your preference.
When ENGAGE LOCK is selected, SET CHANNEL LOCK, SET INPUT LOCK, and SET FRONT PANEL LOCK can be set individually.
When SET CHANNEL LOCK is turned on, the picture and sound for the chosen channel will be blocked out.
When SET INPUT LOCK is turned on, the picture and sound for all video inputs and the picture and sound for channels 3, 4 will be
blocked out.
When PANEL LOCK is turned on all buttons on the Front Panel will be deactivated
except the Power button.
When MOVIE RATINGS is selected, you can block various types of movies and video tapes based on motion picture ratings. Picturein-Picture will also be blocked automatically (see page 49).
"""_
When TV RATINGS is selected, various types of television programming
PictureqmPicture will also be blocked automatically (see page 50).
based one parental guide ratings will be blocked.
Use CANADIAN RATINGS to block various types of movies and television programs based on the two rating systems used in
Canada that you feel may be inappropriate due to its content (see pages 51-52).
If you forget your access code, use the factory code 7777 to erase your key number. This will reset the access code number back to
the factory preset 0000.
Press EXIT to quit the menu.
]
NOTE:
If MOVIE/TV
Ratings Lock function settings
are ON, STROBE
deactivated,
freeze and MULTI
PICTURE
(12 Pictures) will be
j
48
LOCKS
Movie
Ratings
1
Usecontent.
MOVIE RATINGS to prevent viewing of any movie that you feel may be inappropriate due to
J its
I_Locks
Acces
IE_gag_
m_
MENU
®
fLocks
m
mCharlge
m
Code
Lock
m
r_._ Lock
II
Not
Status
Rated:
m
mw
[email protected]
G:
PG:
R_t h_g_
_Canadiatl
Rath]g_
(Et]g)
_Canadiatl
Rath]g_
(FrrO
[
_
MOVe
_
Returr,
PG
13:
NC
17:
R:
]
X:
I # _ow
C_D
R_turn
Use the CURSOR buttons (A, T) to select the MOVIE RATING category that you want to block.
Press the OK button to block the MOVIE RATING that you have selected. Once rating is selected, for example PG-13,
all movies rated PG-13 and higher (R, NC-17, and X) will be blocked.
Press EXIT to quit the menu or select MOVIE RATING to return to the previous menu.
Motion Picture Ratings Chart
General audiences.
admitted.
G
All ages
Parental guidance suggested.
PG
Some material may not be suitable
for children.
Parents strongly cautioned. Some
PG-13
material may be inappropriate
children under 13.
Reetricted.
R
for
Under 17 requires
accompanying
guardian.
parent or adult
No one 17 and under admitted.
NC-17
X
NOT RATED
NOTES:
Adults only
(NR)
Contains no rating. Not Rated
(NR) and Not Applicable (NA)
programs. Movie has not been
rated or ratings do not apply.
1.
A movie rating is dependent upon the movie that is viewed.
it.
2.
Blocking "NOT RATED (NR)" programs may block emergency programming,
announcements, religious programs and weather.
49
If the movie does not carry a rating, the TV will not block
sports, news, public service
LOCKS
[
TV Ratings
Use
TVitsRATINGS
due to
content. to prevent the viewing of any TV program that you feel may be inappropriate
fLocks
m
_TV
)RAti,lg_
Sub
Status
MENU
®
D
TV
TV
................ @
@
TV
I
_
L
Category
s
v
FV
Y:
Y7:
_
,_
G:
TV
Z4:
€.
TV
MA:
_
Move
_,
_
¢..
¢,
_
i_
¢.
Returr_
Use the CURSOR buttons (A, V) to highlight the category that you want to block.
Press the OK button to block the TV RATINGS that you have selected.
Press the MENU button to quit the menu
TV Parental Guide Ratings
Chart
NOTES:
N/A
None.
1.
All children.
TV-Y
TV-Y7
The themes and elements in this
program are specifically designed for a very
young audience, including children from ages
2-6.
Directed to older children. Themes and
elements in this program may include mild
physical or comedic violence, or may frighten
children under the age of 7.
General audience.
TV-G
violence, no strong language, and little or no
sexual dialogue or situations.
Parental guidance
TV-PG
TV-14
TV-MA
It contains little or no
suggested.
The program
may contain infrequent coarse language,
limited violence, some suggestive sexual
dialogue and situations.
Parents strongly cautioned. This program
may contain sophisticated themes, intense
sexual situation, more intense violence and
intensely suggestive dialogue.
Mature audiences only. This program may
contain mature themes, indecent language,
graphic violence, and explicit sexual content.
FV
Fantasy
Violence
V
Violence
S
Sexual Situation
L
Adult Language
D
Sexually
Suggestive
Dialogue.
50
If you Block TV-14D, you will still permit
TV MA programs; If you block TV-14DV,
you will automatically
block TV-MAV
programs,
but you will still permit TVMALS programs.
This means that the
TV will block violence
in TV-14 and
higher
sex.
2.
(TV-MA),
TV program
but not language
ratings
are dependent
the broadcaster.
If the program
rated, the TV will not block it.
and
on
is not
LOCKS
Canadian Ratings
(Eng)
Use Canadian Ratings (Eng) to block any type of movie and television program in Canada that
you feel might be inappropriate in its content.
_Locks
mLocks
Access
_Engage
Lock
M
m
Code
Status
_rv r_.,e Lock
MENU
®
mChange
mMovie
Rati_g_
c8_:
................... @
@
PG:
_Canadiaa
Ratings
_Fva_
18_:
[ _ _ow
[Z_3 R_turn
[
Use the CURSOR buttons (A, T) to select the CANADIAN RATINGS (Eng) category that you want to block.
Press the OK button to set the CANADIAN RATINGS (Eng) that you have selected. Once rating is selected, for example
C8+, all movies and television programs rated C8+ and higher (G, PG, 14+ and 18+) will be blocked automatically.
Press the MENU button to quit the menu
Canadian
Ratings
English Chart
Programming
intended for children under age 8 = Violence Guidelines; Careful
attention is paid to themes, which could threaten children's sense of security and wellC
being. There will be no realistic scenes of violence. Depictions of aggressive
behaviour will be infrequent and limited to portrayals that are clearly imaginary,
comedic or unrealistic in nature. Other Content Guidelines: There will be no offensive
language,
nudity or sexual content.
Programming
generally considered
acceptable for children 8 years and over to
watch on their own - Violence Guidelines: Violence will not be portrayed as the
08+
preferred, acceptable, or only way to resolve conflict; or encourage children to imitate
dangerous acts which they may see on television. Any realistic depictions of violence
will be infrequent, discreet, of low intensity and will show the consequences of the acts.
Other Content Guidelines: There will be no profanity, nudity or sexual content.
General Audience - Violence Guidelines: Will contain very little violence, either
physical or verbal or emotional. Will be sensitive to themes which could frighten a
G
PG
14+
younger child, will not depict realistic scenes of violence which minimize or gloss over
the effects of violent acts. Other Content Guidelines: There may be some inoffensive
slang, no profanity and no nudity.
Parental Guidance - Programming intended for a general audience but which may not
be suitable for younger children. Parents may consider some content inappropriate for
unsupervised viewing by children ages 8-13. Violence Guidelines: Depictions of
conflict and/or aggression will be limited and moderate; may include physical, fantasy,
or supernatural violence. Other Content Guidelines:
May contain infrequent mild
profanity, or mildly suggestive language. Could also contain brief scenes of nudity.
Programming
contains themes or content which may not be suitable for viewers
under the age of 14 - Parents are strongly cautioned to exercise discretion in
permitting viewing by pre-teens and early teens. Violence Guidelines: May contain
intense scenes of violence. Could deal with mature themes and societal issues in a
realistic fashion. Other Content Guidelines: May contain scenes of nudity and/or sexual
activity. There could be frequent use of profanity.
18+
Adult - Violence Guidelines: May contain violence integral to the development of the
plot, character or theme, intended for adult audiences. Other Content Guidelines: May
contain graphic language and explicit portrayals of nudity and/or sex.
51
LOCKS
Canadian Ratings
(Frn)
Use CANADIAN RATINGS (FRN) to block Canadian French programs according to various
program ratings that you feel might be inappropriate in its content.
_1_Locks
mChange
IEngage
Lock
I
I
C:
G:
Ratings
P_
c8+:
(E_g)
(z# R_t_,_
P_
PG:
|
I_ ,ov_
_11
Status
................................
@
...................
i!i!iii_il;ii_
¸....
_Ca_adia_
B
II
Code
Irv ri._e Lock
_Novie R_t_g_
MENU
®
JLocks
M
Access
14+:
I
I_1
18+:
Use the CURSOR buttons (A, T) to highlight the category that you want to block.
Press the OK button to set the CANADIAN RATINGS (FRN) that you have selected.
Once rating is selected, for example 8 ans+, all movies and television programs rated 8 ans+ and higher will be
automatically blocked.
Press the MENU button to quit the menu
Canadian Ratings French Chart
G
General - Programming intended for audiences
of all ages. Contains no violence, or the
violence content is minimal or is depicted
appropriately with humor or caricature or in an
unrealistic manner.
8 ans +
8 + General - Not recommended for young
children = Programming intended for a broad
audience but contains light or occasional
violence that could disturb young children.
Viewing with an adult is therefore recommended
for young children (under the age of 8) who
cannot differentiate between real and imaginary
portrayals.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
1 3 ans +
iiiiiiiiiiiiiiiiiiiiij,_i
iiiiiiiiiiiiiiiiiiiii ; i iii!i
1 6 ans+
iiiiiiiiiiiiiiiii,!_i!Jii!_iii:ii
iiiiiiiiiiiiiiii_;!iiii:i:i:i_;!_i_i_i_
1 8 ans +
iiiiiiiiiiiiiiiiiiiiiiii';!_iiWi_;ii
Programming
may not be suitable for
children under the age of 13 - Contains either
a few violent scenes or one or more sufficiently
violent scenes to affect them. Viewing with an
adult is therefore strongly recommended for
children under 13.
Programming is not suitable for children
under the age of 16 - Contains frequent scenes
of violence or intense violence.
Programming restricted to adults - Contains
constant violence or scenes of extreme violence.
ii';[email protected]_!i_i!ii!iil
iiiii'i_iiiiiiiiiii:ii!;i!;!ili3_!iiii_!
iiiiiiiii'i_!ilBi!,!ii_iiii_:i
iiiiiiiiiiiiiii i iiiiiii!!!i!i ii ii!
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i_Oiii_il
52
CAPTIONS
Capri ons
] Closed
Captions are the dialogue, narration,
which are displayed on the TV screen. Your
E3
JPicture
]_
|T_mor
|
JFunction
]_
|sotop
|Lode,
|
|
|
_Langu_ge
]_
and/or sound effects of a television program or home video
local TV program guide denotes these programs as _
or
_aptlons
Captlon
Mode:
Captlons
Channel:
i _ Mow
N
Display
@Off
® Captions
® i O 2
O On
O
O
3
O
O 4
Auto
Text
_?Return
Select
_)Set
Caption
Display:
On/Off will turn the _
Auto will turn the _
Caption
Mode:
Captions
display on or off.
display on when Mute is on.
is for the program you are viewing.
Text is for additional information such as news reports or a TV program guide. This information covers the entire
screen and viewing the TV program is not possible. Text may not be available with every
program.
CHANNEL:
1
2
3
4
is
is
is
is
used for the primary
sometimes used for
sometimes used for
sometimes used for
language (usually English).
a second language (may vary by region).
a third language (may vary by region).
a fourth language (may vary by region).
Use the CURSOR buttons A, T, _, _- to highlight the function to change then press the OK button to select the function.
Press the MENU button to exit or the RETURN button to return to previous menu.
NOTES:
1. CAPTION DISPLAY will not work when viewing a 480p, 720p, or 1080i input via the COMPONENT: Y-PBPR inputs.
2. When the MULTI PICTURE (12 picture) Mode is on, Closed Caption will not work.
3. Closed Caption availability and content depends on the broadcaster. Closed Caption is available when Closed
Caption icon is displayed on screen.
53
LANGUAGE
Language
i
This feature will select the language options of the OSD.
m Picture
M
|Ti,,,o,-
111
_Function
|
| ......
|Lod_
mLanguag
e
® English
|
|
Hove
0
Fran_als
0
Espa_o]
C_3Retur_
_
E×_t
mCaptlons
|
|
._
Select
_Set
Use CURSOR buttons A, _' to highlight the function to change then press the OK button to select the function.
Press the MENU button to quit menu.
iiiiiiiiiiiiiiiiiiiiij_i
iiiiiiiiiiiiiiiiiiiii_i_iii!i
iiiiiiiiiiiiiiiii,!_i!Jii!_iii:ii
iiiiiiiiiiiiiiii_i!iiii:i:i:i_i!_i_i_i_
iiiiiiiiiiiiiiiiiiiiiiii'i!_iiWi_ii
iiiiiiiii'i_!iii:ii:ii!_i!_iiiilili!,!ii_iiii_:i
iiiiiiiiiiiiiii i iiiiiii!!!i!i ii ii!
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i_Q!i_i
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii ii ii i! i! i! !i!
54
CONNECTING
1.
TO A PC RGB1 or RGB2
Make sure that the display signal of the personal computer to be used is compatible with the specifications of this
device.
See "Product Specifications"
concerning the specifications of this device.
2.
Make sure that the power switch of the personal computer is turned off.
3.
Connect the signal input terminal (RGB 1 or RGB 2) on the rear panel of this device to the display signal output
terminal of the personal computer.
• Use a cable that fits the input terminal of this device and the output terminal of the personal computer.
• Depending on the type of personal computer being connected, the use of an optional conversion adapter or the
adapter provided with the personal computer may be necessary in some cases. For details, refer to the
instruction manual of the personal computer or ask the personal computer manufacturer or your local retail
dealer.
Monitor
rear panel
Speaker(R)
Speaker (L)
o
Power
cable
e
t
connector
DIGITAL iNPUT
RGB 1
ANALOG INPUT
RGB 2
Pc _
PC_
AUDIO IN
RGB 1 RGB 2
_0
_O
-3.5mm
Power
cord
(D-sub)[_
mini jack
To signal __
output _
To signal
output
_,_
To audio
terminal _
terminal
III
PC
55
output
terminal
CONNECTING
TO A PC RGB1 or RGB2
1. Other signal formats may not be displayed correctly. Use AUTO ADJUST to automatically adjust the horizontal position, vertical
position, clock, and phase. We recommend you use a signal, which has more than 50°/o of amplitude of white area at each corner
ofthepicture,
whenperformingAutoAdjustment.
Itmaynotworkcorrectlywithdarkpicture(seepage63).
2. Input signal level.
NOTE:
SYNC
TTL level H/V separate
RGB INPUT
0.7Vpp/1.0Vpp
signal
Interlaced signal is notavailable.
RGB inputsignal will notappearatall
Display Monitor will display:
when receiving asignal
]
which is notsupported
! NO SYNC. SIGNAL
Without
! INVALID
bythis
SCAN FREQ.
Either horizontal
sync
product. If the setting iswrong,
or vertical
frequency
is inappropriate
or out of range.
POWER SAVING
mode will come
on after 10 seconds.
INVALID SCAN FREQ.
after 60 seconds.
will disappear
NOTES: 1. If the Display Monitor cannot display a signal, please try AUTO ADJUST to display the signal. This is used to initialize
the MultiScan Converter.
2. Not all signals have AUTO ADJUST feature (see page 63).
3. Set-Top-Box and DVD player input signal does not have AUTO ADJUST feature.
56
the
RGB ON SCREEN DISPLAY
1. Press the INPUT and MENU button, then use the CURSOR buttons and the OK button on the
remote control to display the different features in RGB MODE.
2. Press the MENU button on the remote control to quickly exit from a menu.
Q
INPUT
INPUT button
OOO
PICTURE
RECALL
AUDIO
MPX
'O00O
SURROUND
MULT.PIC
@[email protected]
@®
MENU button--
MENU
R_N
_!_
iii_i!ii!iiii
iiii_i_ii
i_i_ii
iiiiZii!ii!
i_U_i_
i::_i
©®®
®@@
©@®
®@®
©0©©
0 oo
...........
d
This part of the screen shows
which selections are available.
mAudlo
IITi ,,,o,-
11
IFunctlon
I
I
I
L°cks
_Captlons
_Language
Select
[[]_)Set
]
_This
of the
screen
showspart
which
Remote
Control buttons to use.
!,
_.1
57
RGB ON SCREEN DISPLAY
Contrast
Brightness
Color
iiiiiiiiiiiiiiiiiiiii Pi
i i !ili
ctu
iiiiiiiiiiiiiiiiiiiii ii,ii il
iiiiiiiiiiiiiiiiiiiii ii ii il
Sharpness
lint
Color Temperature
re
Color Temp. Adjust
Reset
iiiiiiiiiii i !iiiiiiiii!ii!i!!! iiii i! i! ii
iiiiiiiiiiiiiiiiiiiiiiiiiiii'ii'i!
Audio [email protected]!i
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiijiiii_i!_;ii_ii_!!
Ti me rs ]
Audio Mode
Treble
Bass
Balance
SRS TruBass
Matrix Surround
Perfect Volume
Select
Adjust
Adjust
Adjust
Select
Select
Adjust
Off Timer
This function automatically sets the power to standby status
when the indicated time period has elapsed.
This automatically sets the power from standby to ON when the
indicated time period has elapsed.
On Timer
Screen Saver
Screen Wipe
Set Black Side Panel
Functi on
Video Power Save
Freeze Mode
Default Zoom
Reset
Setup]
_.-
Auto Adjust
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Input Level
Frequency Display
WVGA Type
WXGA Mode
Vertical Filter
Frequency Mode
RGB1
RGB2
[
NOTE:
Change the contrast between black and white levels in the
_icture.
Adjust overall picture brightness.
Adjust color.
Adjust sharpness.
Adjust tint.
Select between COOL (12,000K), NORMAL (9,300K),
WARM (6,500K), or Black/White (5,400K).
Enhance picture details (Off, Low, Medium or High).
Recall the factory preset data of the RGB Video Settings.
preset Audio Modes.
the treble.
the bass.
the balance.
SRS settings (Off, Wide, Normal).
Matrix Surround (On, Off).
volume in fixed setting.
Set Screen Saver to prevent screen burn.
Select Screen Wipe function.
Set the gray side bars on/off when watching 4:3 signals in
4:3 mode.
Set to reduce power consumption for video input when there is
no video input.
Select freeze between split (2 pictures) and strobe (12 pictures).
Select the screen display size (default).
Reset/Restore to original factory settings.
Automatically adjust the geometry to fit the screen.
Adjust horizontal position.
Adjust vertical position.
Adjusts the dot clock frequency to reduce the vertical stripe.
Adjusts the phase to correct blurred or unstable images.
Recall the factory preset data of the RGB setup settings.
Set the preferred input signal level.
Set to OFF is the frequency information of the input signal
screen display is not required.
Only available for W-VGA signal. When it is set to On, the
display area mode can be selected Full or Real.
Only available for (PC) WXGA signal. The display area mode is
selected [1280x768] or [1366x768].
Set to Control Screen flicker.
Set to PC or Movie.
Set to DVI-PC or DVI-STB (Set-Top-Box).
Set to RGB or component.
When RGB1 is selected, Horizontal position, Vertical position, Horizontal clock, Reset, WVGA Type and WXGA Mode will [
not be available ra ed out.
N
58
RGB ON SCREEN DISPLAY
Change Access Code
Engage Lock
Movie Ratings
[ Locks
]---_
TV Ratings
Canadian Ratings (ENG)
Canadian Ratings (FRN)
Change Lock access code.
Choose to lock channel, video input, and/or front panel.
Block various types of movies and video types based on motion
_icture ratings.
Block various types of movies and television programming
based on a parental guide ratings.
Block various types of movies and television programming
based on the Canadian ratings system.
ili{Ziiiiiii
Block various types of movies and television programming
based on the Canadian French ratings system.
i{! i
i_j_i_
iiiiiii
Set to OFF/ON/AUTO
Set to display dialogue/text.
Captions
Caption
Caption Display
Mode
Language
Set Menu options to English, French or Spanish.
59
i_,U_i_
i :i i
RGB ON SCREEN DBPLAY
VIDEO ADJUSTMENTS
The following adjustments are independent of the TV mode:
,,Press MENU in RGB mode for on screen display.
,,Press CURSOR buttons A or T to highlight the item to be adjusted.
,,Press the OK button to select the highlighted item.
CONTRAST
This feature allows you to adjust the contrast in RGB mode.
Use CURSOR buttons 4 or t,. to adjust contrast.
Press the RETURN button to return to RGB MODE
MENU and Press MENU to exit.
i_
Select
_
NOTE:
Retur_
_
E×it
}
See TV contrast feature for additional information regarding contrast.
BRIGHTNESS
This feature allows you to adjust brightness
in RGB Mode.
|Picture
mC°_t r¸a_t
m
_3z I
Ilcolo_
II
o
IIr-,t
|
o
IlSo' Z_,,,
....... :
_(.o
[or
Tenlp:
[
Use CURSOR buttons _t or I_ to adjust brightness.
Press the RETURN button to return to RGB MODE
MENU and Press MENU to exit.
"_ "'_'
Adjust
II......
[_
!ll
M
|
_:tt ............._? _._,
.....
_
E_,_ ......................
This feature allows you to adjust Color in RGB Mode.
COLOR
Picture
Contrast
m
Brightness
m
_31
[
.......................................................................
o I
Color
re.p.
Use CURSOR buttons _t or I_ to adjust brightness.
Press the RETURN button to return to RGB MODE
MENU and Press MENU to exit.
_i_
0
m
I
Adiust
_.,_
...._ _.i_t .........................
_: _:_:t_J_,
Ul
_....
I
_ _t.................................................
6O
RGB ON SCREEN DISPLAY
This feature allows you to adjust Tint in RGB Mode.
TiNT
HPI
cture
ii! i
]_
I,,,g,, ......
&o_o,
m
m L[[o_
Use CURSOR buttons _1 or _, to adjust tint.
Press the RETURN button to return to RGB MODE
MENU and Press MENU to exit.
...................
II
)
)
)i)ii_iiiiii
¸
)i)i)i
i_,U_i_
i :) i
PICTURE
ENHANCEMENT
_Picture
This feature sets the clarity of small details to desired level in RGB Mode.
]_
Use CURSOR buttons _1 or _ to set.
I_.....
TEMPERATURE
COLOR
mPi
| [
i
.....
]
Use the CURSOR buttons _1 or I_ to change the COLOR TEMPERATURE.
Set to COOL for a
cooler picture with more blue (12,000K), set to NORMAL for more natural color (9,300K), or set
to WARM for accurate color (6,500K), or Black/White (5,400K).
ctu_e
Hco_o_
|_.,t
|p, ..... E.,..........
ml o_1
m I o _l
| lH.j,
l
)
m i.o,o_
i
[ _ _;,iL:;-t..................
.....................................
)
61
RGB ON SCREEN DISPLAY
COLOR TEMP.
ADJUST
JPi
Set to ON when you wish to change color temperature depending on the user's preference.
cture
]_
msr_gh .....
m [
o i
[]
i]
|r,nt
|
o I
m
I]
MP,_t,,_En,...........
m [ ,,,,
IN.....
i [
[
]
.....
Ex,)
RESET
Set Menu Items to factory preset condition.
Use CURSOR buttons 4 or _ to highlight Reset.
Press the OK button button to RESET to factory
preset settings.
l
l
l
l
AUDIO
See page 40.
TIMERS
See page 41.
FUNCTION
See page 42-43.
SETUP
|
|
.....
|HOrl
djust
......
m
]
mvertic_]
_HoPi
I(I.....
POSltiOtl
Pos_tlotl
......
]
Clock
[
Ad
USt
|
[
O
_
[
o ...............................
_
[
O
II [
]
_
]
................
.....
_
...................
i
]
]
422
]
]
]
]
]
]
]
]
I
62
RGB ON SCREEN DISPLAY
AUTO ADJUST
]I
HORIZONTAL POSITION, VERTICAL POSITION,
for current RGB format are adjusted automatically.
HORIZONTAL
CLOCK and CLOCK PHASE
mSetup
m _
_
mvo,
.................
I
_Hor izo,,tal
II
_C]ock
NOTES:,
i
Ad
clock
Ph,_ se
iu
Use CURSOR buttons _1, I_ cursors to highlight adjust.
Press the OK button to select AUTO ADJUST.
s t
0
_
]
The other functions do not operate while AUTO ADJUST is in progress.
, Allow the Plasma TV to warm up for 20 minutes before performing AUTO ADJUST.
, Select a bright image for display while AUTO ADJUST takes place.
* If AUTO ADJUST terminates unsuccessfully, try AUTO ADJUST again. If AUTO ADJUST fails several times in
succession, try using manual adjustment to adjust Vertical Frequency, Aspect Ratio, Timing Frequency and Picture.
, Always reset AUTO ADJUST when setting new display setting or when changing to a new
external component.
H POSITION
i This feature allows you to adjust the horizontal position of the display.
_[Setup
mAuto
Adiust
m
::::::::::::::::::::::::::::::::::
i
i
._ select
_
Adjust
.1 /(/ 1/1/i}i 1/1/i}
_etu*r_
V POSITION
_
i
Exit
::
This feature allows you to adjust the vertical position in RGB mode.
_rSetup
|vo_
_c]ock
|
Pha_e
II.....
_TTF[t .......................
Use CURSOR buttons _, m,,to adjust the horizontal position.
Press the RETURN button to return to previous menu item.
Press MENU to quit.
_
.....................
_.........................
[
o
Ill [
_
B
Use CURSOR buttons _, _, to adjust the vertical position.
Press RETURN button to return to previous menu item.
Press MENU to quit.
l
.....
1#_ ..............................................
63
RGB ON SCREEN DISPLAY
HORIZONTAL
CLOCK i Adjusts the pixel clock frequency to reduce the vertical stripe.
Use CURSOR buttons _, m,,to adjust the horizontal clock.
Press the RETURN button to return to previous menu.
Press MENU to quit.
)))))))))))))))))))))_i_i_!ii)
)))))))))))))))))))))_ii,ii_ii
iiiiiiiiiiiiiiiiiiiii_ii_ii_il
_[Setup
]_
I
m
| .....
i [
.....
q
[email protected]_,i_i_
__
NOTE:
Due to varying signal content, you may see vertical or horizontal lines bend occasionally in RGB mode. However, this
not a defect. It's caused by a lack of picture content due to under-scanning in RGB mode.
iiiiiiiiiiiiiiiiiiiiiiiiiiiB!_ii_ii_!)
iiiiiiiiiiiiiiiiiiiiiiiiiii)i!
phenomenon
[email protected]!i[ is
CLOCK PHASE
_Set
i Adjusts the phase to correct blurred or unstable images.
up
XA.toA_Ji._
|
(Vert{c_l
(
Po_)t)on
RESET
A_Ji._
0 1
m
_t_
Adjust
I]
i Set
HORIZONTAL
POSITION,
VERTICAL
POSiTiON,
PHASE
to factory preset,
for current
RGB format.
mSetup
_Aut°
]
Use CURSOR buttons 4, I_ to adjust the clock phase.
Press the RETURN button to return to previous menu item.
Press MENU to quit.
[I
_o_,t_o. _
Ad
o_
lust
I
HORIZONTAL
CLOCK
and CLOCK
Use CURSOR buttons _1, _,, to highlight Reset.
Press the the OK button to RESET to factory preset
settings.
i
64
RGB ON SCREEN DISPLAY
[
ii! i
Select the Input Level voltage between 0.7V and 1.0V.
INPUT LEVEL
Use CURSOR buttons _1, I_ to select between 0.7V
and 1.0V depending on the amount of brightness in
the picture.
0.TV
On
Off
Off
i ji
Off
PC
DVI
iiiii_iiiiiii
¸
PC
RGB
(_}
iiiiiii
Return
i_,U_i_
i :i i
i NOTE:
[
When RGB1 is selected, this function will be deactivated.
FREQUENCY
DISPLAY
Set this to Off if the frequency information of the Input Signal Screen Display is not required.
mSetup
M
Ii_t
Leve_
|
m
O.TV
m
On
Use CURSOR buttons _1or _ to set.
Off
I ...... d_
_Vertlcal
_F
m
requency
Off
Mode
PC
I ....
I ....
E _
J
Off
F_lter
m
m
Select
4_
PC
RGB
{_'_) Return
Set
WVGA MODE
DVI
i This
is only
selected
Full available
or Real. for W-VGA signal. When it is set to On, the display area mode can be
USetup
_Ihput
_F
]
0.TV
Level
requeney
On
D _ _play
Off
......
_Ver
_F
t
_c_l
requency
d_
I_
Off
Off
F _lter
PC
Mode
DVI
PC
RGB
E €
J
Select
_
Set
@
Return
I
I
I
I
I
I
I
I
Use CURSOR buttons _1or _ to set.
This is only available for (PC) WXGA signal. The display area mode is selected
[1366x768].
WXGA MODE
_rsetup
_Frequerlcy
[
_
Select
Displ,_y
_
4_
Set
[
Oh
_
_eturn
]
]
]
]
]
]
]
]
]
Use CURSOR buttons _1or _ to set.
65
[1280x768] or
RGB ON SCREEN DISPLAY
VERTICAL
Turn On when concerned about screen flicker.
FILTER
)))))))))))))))))))))iii!iii'ii_iiiiiiiiiiii,i_i_))ii!!i
_[Setup
]_
mznp_t
hevol
m_ requency
o_ splay
iiiiiiiiiiiiiiiiiiiii ii iimwv_.
il _e
m
0.TV
m
On
m
Off
Off
Off
_Frequemcy
PC
Mode
m....
m....
m
m
DVI
PC
RGB
)))))))iiii i !iiiiiiiii!ii!i!!! iiii i! i! i)
[
_
Select
,.
Return
Set
]
]
]
]
]
]
]
]
]
Use CURSOR buttons 4 or I_ to set.
))))))),!!!!!!!!!!!!!!!!!!!!!_i;ii_!!_iii!!
iiiiiiiiiiiiiiiiiiiiiiiiiiii'ii'i)i
l FREQUENCY MODEi! i iiSet
iiiiiiii
to Movie
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!_;ii_ii_!)
_[Setup
when viewing moving images on a personal computer.
]_
mznp_t Levol
m
0.TV
m_ requency
m
On
o_ splay
Use CURSOR buttons _ or I_ to set.
Off
Off
m ver¸t_
cal
_ilter
|
(....
m
Off
(@
(
PC
DVI
PC
RGB
[
_
[
Select
_
i))]
Set
Return
This should correspond to the signal mode of the signal from the equipment that is connected to
RGB1 DVl terminal.
RGB1
mSetup
linnet
L_vel
m_ requency
D_ splay
m
o. 7v
m
on
]
I
I
I
I
I
I
I
I
off
off
_Ver
_F
tical
off
F ilt_r
r equer_cy
pc
Mode
DVI
PC
RGB
[
_
[
Select
,,
t_
Set
Return
Use CURSOR buttons _ or I_ to set.
This should correspond to the signal mode of the signal from the equipment that is connected to
RGB2 D-sub terminal.
RGB2
_Setup
_Input
_F
m
Level
requency
m_CA
off
type
|.....de
|Vet
_F
t
ic_l
r equer_cy
m
off
off
F ilter
PC
Mode
Dvi
|
i
|
'_ Select
]
O.TV
Display
_
Set
PC
RGB
f_'
_eturn
I
I
I
I
I
I
I
I
Use CURSOR buttons _1or I_ to set.
66
RGB ON SCREEN DISPLAY
[
LOCKS
CAPTIONS
See pages 48-52.
i¸I!_
_iiii
See pages 53.
i_i_
i_!
iliiiZiiiiiii
iiiiiii_
i_
[
LANGUAGE
i_,U_i_
!ii!ii
i_:i_
iiii
See pages 54.
67
CARE OF YOUR HiTACHi PLASMA DISPLAY
AND YOUR REMOTE CONTROL
DO
Dust the screen and frame with a cleaning cloth from the accessories pack.
Clean the screen and frame with a soft cloth moistened
be used if the screen is extremely dirty.
in warm water and dry with a soft cloth. A mild soap may
Place your Plasma Television away from extreme heat, humidity, and extremely dusty places.
Remove the plug from the wall outlet if your Plasma Television will not be used for a long period of time, for
instance, when you go on vacation.
DO NOT
Do not clean your screen with strong cleaners, polishes or a chemically treated cloth.
Do not place rubber or vinyl products or cellophane tape on your Plasma Television.
Avoid repeatedly touching the screen.
Do not subject the remote control to shocks such as dropping it on the floor, etc. This may cause physical damage
to the precision parts.
Avoid placing the remote control in a high humidity place or getting it wet.
Excessive heat or moisture may cause the remote control unit to fail.
Do not leave it on or near a heater.
When the batteries run down, remote control operation will become erratic or become unresponsive.
batteries with two new "AA" size batteries. Do not use an old battery with a new battery.
Replace the old
Exposing the screen to direct sunlight for a long period of time or heat may cause damage to the plasma screen.
68
RECEPTION
PROBLEMS
• IGNITION
NOISE:
Black spots or horizontal streaks may appear picture may flutter or drift. Usually caused by
interference from automobile ignition systems, neon lamps, electrical drills, and other electrical
appliances.
, GHOSTS:
Ghosts are caused by the television signal following two paths. One is the direct path and the
other is reflected from tall buildings, hills or some other objects.
Changing the direction or
position of the antenna may improve reception. Ghosting may also be caused by defects in the
antenna system such as unshielded leads or connecting several sets to the same antenna
without using multiple antenna couplers.
, SNOW:
If your receiver is located in the fringe area of a television station where the signal is weak, your
picture may be marred by the appearance of small dots. When the signal is extremely weak, it
may be necessary to install a special antenna to improve the picture.
, RADIO FREQUENCY
INTERFERENCE:
The interference produces moving ripples or diagonal streaks, and in some cases, causes loss
of contrast in the picture.
• PREVENTION OF AN OBSTACLE TO RADIO RECEIVERS
This monitor has been designed pursuant to the FCC class B Rules. This is to prevent a
problem to Radio receivers.
If this monitor causes a problem to Radio receivers, then take the
following steps:
- Keep the monitor away from Radio.
- Adjust Radio antennas in order for the monitor not to receive
interference.
- The antenna cable of Radio should be kept away from the monitor.
- Use a coaxial cable for antenna.
You can check if this monitor influences Radio receivers by turning off all other equipment other
than the monitor.
If you find a problem receiving Radio when using the monitor, check the instructions
above.
• Adjust the horizontal clock and clock phase.
(Adjust the horizontal clock first, the clock
phase next.)
(RGB input)
- The display image appears
scrolling diagonal.
- Text displayed across the
screen appears vertically
streaked, with the characters
in vertical columns blurred.
" Text
screendisplayed
appears across
blurred. the
- A fine pattern flickers
when
displayed
ell the screen.
L
, ,_djust the clock phase for the clearest
viewing.
(RGB input)
i
!_1_
i
i
A
i
L
' Vertical stripes appear,
screen contents.
depending
oil the
, Coarse horizontal stripes appear in FULL
display.
, The display dims to make the picture
invisible during special playback of a
VCR (FF, REW).
° The plasma display panel is lighting the
phosphors by the discharge of internal
radiation. Depending on the screen
contents, in rare cases this may cause
vertical stripes to appear because of failure
to light. Please note that this is not a
malfunction.
- Adjusting the clock phase will reduce the
horizontal stripes.
(RGB input)
This condition may occur when the unit is
connected to a VCR with component output,
such as 480i, but it is not a failure. But when
it occurs, switch to composite output or Sl
(S2) output).
69
mentioned
USEFULINFO
/
!
SYMPTOMS
No Picture, no sound
®
Sound OK, picture poor
0
0
0
0
®
0
0
0
0
®
Picture OK, sound poor
®
0
0
0
0
®
Picture blurred
®
•
•
0
•
®
Lines or streaks in picture
•
•
0
•
0
Poor reception on some channels
•
0
•
•
®
Picture rolls vertically
•
No color
Poor color
0
0
®
®
®
•
•
•
•
•
®
Q
0
0
0
0
®
7O
•
PLUG and PLAY
This Plasma Television complies with VESA DDC2B specifications, Plug & Play
is a system with computer, peripherals (including monitors) and operating
system. It works when the monitor is connected to a DDC ready computer that
is running an operating system software that is capable for the plug & play.
When a Plug and Play PC is powered on, it sends a command to the Monitor
requesting identification. The Monitor sends back a string of data including its
characteristics.
TRADEMARK
DDC TM is a trademark
IBM PC/AT and VGA
Apple and Macintosh
VESA is a trademark
ACKNOWLEDGMENT
of Video Electronics Standard Association.
are registered trademarks of International Business Machines Corporation
are registered trademarks of Apple Computer, Inc.
of a nonprofit organization, Video Electronics Standard Association.
This Class B digital apparatus meets all requirements
of the Canadian Interference-Causing
of the U.S.A.
Equipment Regulations.
I This Class B digital apparatus complies with Canadian ICES-003.
[Cet appareil numerique de la classe Best conforme b, la norme NMB-003 du Canada.
i Cable Compatible Television Apparatus- Television c&blocompatible,
Notes on Closed Caption:
This Plasma Television receiver
15.119 of the FCC rules.
will display
television
i
Canada.
closed captioning,
([_'_
or El),
F
71
in accordance
with paragraph
USEFULINFO
i iNFORMATiON
AGENCY REGULATORY
Federal
Communications
Commission
Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly
approved by Hitachi Home Electronics (America), Inc. may void the user's warranty.
Cables
Connections to this device must be made with shielded cables with metallic RFI/EMI connector
compliance with FCC Rules and Regulations.
hoods to maintain
Any cables that are supplied with the system must be replaced with identical cables in order to assure compliance with
FCC rules. Order Hitachi spares as replacement cables.
Declaration
of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference and (2) this device must accept any interference received, including interference
that may cause undesired operation.
For questions regarding this declaration, contact:
Hitachi America, LTD.
Home Electronics Division
900 Hitachi Way
Chula Vista, CA 91914-3556
Tel. 1-800-448-2244 (1-800-HITACHI)
ATTN: CUSTOMER RELATIONS
72
USEFUL INFO
Features:
,, New Easy-to-Use On-Screen Menu Control (3 Language)
,, Preprogrammed Remote Control
,, Power Management:
ON/OFF via signal detection
,, Picture Enhancement
Video:
,, 852 x 480 Display Resolution
,, High-Contrast Pure-Color Glass Shield
,, Wide Viewing Angle: Morethan 160°
,, 4 Color Temperature Presets: Black/White-5400K, Normal9300K, Warm-6500K, Coo1-12000K.
,, Multiple Screen Fill Modes (4x3/Panoramic/
Zoom/Full/Cinema)'
,, 4MB 10-bit 3D Y/C Comb Filter
,, Picture Modes (Day and Night)
,, Computer Display: VGA, (SVGA, XGA, SXGA-scaled)
Audio:
,, MTS Stereo/SAP
,, TruBass and Matrix Surround
,, 12W + 12W
Supplied Accessories:
,, Remote Control
,, Batteries
,, AC Cable
,, Speakers (x2)
,, Cleaning Cloth
,, Speaker Wires
,, Speaker Holder (x4)
,, Cushion (x2)
,, Mounting Screws (x8)
INPUTS/OUTPUTS
, inputs: ..................................
RGB1, RGB2, AVl-AV3
Component Y, Pb, Pr .............................................................
3
RGB (Analog) ........................................................................
1
RGB (Digital) .........................................................................
1
Composite Video ...................................................................
3
S-Video .................................................................................
1
Antenna (RF) ........................................................................
1
Audio L/R ..............................................................................
5
,, Inputs: .................................................
AV4 (SCART)
RGB (Analog) ........................................................................
1
Composite Video ...................................................................
1
S-Video .................................................................................
1
Composite Video ...................................................................
1
Audio L/R ..............................................................................
1
,, Outputs:
.......................................................
Monitor
Composite Video ...................................................................
1
Audio L/R ..............................................................................
1
,, Outputs:
..............................................
AV4 (SCART)
Composite Video ...................................................................
1
Audio L/R ..............................................................................
1
Inputs:
,, Power Input ..............
AC 120V, 60Hz
,, Power Consumption
- Refer to rear panel at the back of the Plasma
Monitor
,, Antenna input impedance
.........
75 Ohm
,, Channel coverage
................
181ch.
VHF-Band
......................
2 - 13
UHF-Band
.....................
14 - 69
CATV Mid Band ...............
............................
Super
Band
Hyper Band
Ultra Band
,,
Video
,,
S-Video
Chrominance
,,
......................
J-W
................
...............
.................
Luminance
A-5 _ A-1
A-I
(Y)
..........
(C) .......
W+I
W+29
_ W+28
- W+84
1.0Vp-p,
75 Ohm
1.0Vp-p,
75 Ohm
0.286Vp-p,
Component Video
Luminance (Y) ...............
Chrominance
(PB/PR)
input Impedance
75 Ohm
SPECIFICATIONS
,, Multi-Scanning:
..... 15.73 KHz/24-107KHz (h), 50-85Hz (v)
,, Pixel Pitch ................................
1.08(H) x 1.08(V) mm
,, FCC class: .................................
B for Consumer
Use
,, Power Requirements:
........................
108-132V, 60Hz
1.0Vp-p, 75 Ohm
.........
,,
Audio
,,
,,
Average input level .................
RGB .......................
0.7Vp-p, 75 Ohm
..........
47k Ohm
470mVrms
0.7Vp-p, 75 Ohm
Screen mode availability varies by input format
HDTV Monitors display HDTV when combined with an HDTV Tuner and Source.
All specifications,
weights, and dimensions are subject to change without prior
notice. Please access www.hitachi.udtv
for detailed specifications and dimensions
for custom installations.
Outputs:
,,
,,
Video .......................
Audio ....................
1.0Vp-p. 75 Ohm
470mVrms, lk Ohm
UltraVision
Inc.
Digital is a registered
trademark
of Hitachi Home Electronics
(America),
TruBass, SRS and the (o) _ symbol are trademarks of SRS Labs, Inc. TruBass
technology is incorporated under license from SRS Labs, Inc.
73
USEFULINFO
Plasma Television
A
INCHES
48 1/2
MM
1233
with
Speakers
B
251/32
636
and Table Top Stand (SET DIMENSIONS)
C
D
E
F
27 1/2
28 1/32
3
3 1/2
700
712
76.2
89.5
G
11 13/16
300
A
B
D
HrrACHI
C
74
_
USEFUL INFO
HITACHI
0
To locate an authorized
HITACHI service
in the continental
and Canada,
facility
U.S.A.
DiAL TOLL
7 days a week, 24 hours a day
(1 =800-448=2244)
Hitachi America, LTD.
Home Electronics
Division
Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service,
a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico. Each facility will provide
you with convenient and expedient assistance. Our service hotline operator will direct you to the Hitachi Authorized Service
Facility nearest you. Just present proof of purchase and/or delivery receipts to the Hitachi Authorized Service Facility, and service
will be rendered in accordance with the terms of the limited warranty as stated on your warranty card or operating guide.
Should you
contact:
have any questions
regarding
warranty,
service,
operation,
Hitachi America, LTD.
Home Electronics Division
900 HitacM Way
Chula Vista, CA 91914-3556
75
or technical
assistance,
please
USEFULINFO
Hitachi Canada, LTD.
Di ital Media Division
Should you have any questions
contact:
regarding
warranty,
service,
operation,
or technical
assistance,
please
in Canada:
1-800=HITACHI
(1-800-448-2244)
Monday - Friday EST 9:00am - 7:00pro
Saturday EST 9:00am - 5:00pro
Look for your
If the manual
French
Manual
is missing,
call
on the outside
of the box.
1-800=HITACHI
(1-800-448-2244)
for a copy.
Pour
de plus
fonctionnement
amples
renseignements
ou pour de I'assistance
sur le service
durant
technique
communiquez
la p_riode
avec:
couverte
Au Canada:
1-800-HITACHI
(1-800-448-2244)
Lundi - Vendredi L'EST 9:00am - 7:00pro
Samedi L'EST 9:00am - 5:00pro
La version
franqaise de votre manual
Si le manuel est manquant,
coposez
se trouve
le
_ I'ext_rieur
de la boite.
1-800-HITACHI
(1-800-448-2244)
pour
obenir
votre
copie.
HiTACHi CANADA,
LTD.
2495 Meadowpine
Blvd.
Mississauga,
ON L5N 6C3
76
par
la
garantie,
sur
le
PRODUCT SPECiFiCATiONS
]|Display
Panel
_,pprox.
IResoiution
Net dimensions
(excluding
Speakers/Stand)
Net weight
(including
1959mm)
1030 (W) x 636 (H) x 91 (D) mm
Speakers/Stand)
42.8
Tem_Te__ature
conditions
JRelstive
Power
supp|y
Power
consumption/at
Audio
output
Kg/114.7
iOperating
h_mmidity
Ibs.
: 5_C to 35_C, Storage
Dperating
: 28% to 80%,
: -t5_C
Storage
to 60_C
: 20% to 90% (non-condensing)
_,C 120V, 60Hz
standby
310W / <3W
I2W
+ 12W (6£_)
input)
Input
input signals
terminals
Video
7GB1
DVI input terminal
_GB1
_GB2
audio input terminal (3.5mm Stereo Min Jack)
analog RGB nput terminal (D-sub
15-pin)
_GB2
audio
signals
signals
input terminal
(3.5mm
Stereo
Min Jack)
signal
Signal)
720p/60
TTL level [2K_]
'V composite
_ync
Recommended
(DVI-D)
_.7 V/1.0 Vp-p, analog RGB (Recommended
_80i, 576i, 480p, 576p, 1080i/50,
1080i/60,
4/V separate,
Sync
(Video
(920 (H) x 518 (V) mm, diagonal
352 (H) x 480 (V) pxels
Ambient
(RGB
42 inches
_s
on green
_L
level [2K_]
0.3 Vp-p
[75_}
_7 modes
input)
iAVl:
composite
video
input
terminal
(RCA)
IAVl: Y PB PR video input term nal (RCA)
iAVt : L/R audio nput terminal (RCA)
Input
terminals
_,V2: L/R audio
_,V3: composite
nput
video
terminal
input
(RCA)
terminal
(RCA)
_,V3: S video nput terminal (RCA)
_,V3: L/R audio nput terminal (RCA)
input signals
_,V4: composite
video
/ S video
/ RGB / L/R audio
nput
terminal
(Scart)
_,V1 : NTSC-M
Video
signals
_,Vl: 480i, 5761, 480p,
_,V2: NTSC-M
576p,
10801/50,
1080/60,
720p/60
_,V2: 480i, 576i, 480p,
_V3: NiSC-M
iAV4: NTSC-M
576p,
1080i/50,
1080/60,
720p/60,
RGB
iAV4: RGB
DUTPUT
(MONITOR):
Video output Signal
DUiPU1
(MONITOR):
_,V4: composite
video
Recommended
15 modes
signal
compos
te video
L/R audio monitor/ L/R audio output
monitor-ot_,tput
terminal
output terminal (RCA)
terminal (SCART)
(RF input)
input signals
rF
• The
monitor
Video
takes
System
at least
INTSC-M
30 minutes
to attain
the
status
of optima]
picture
77
quality.
(RCA)
PRODUCT SPECiFiCATiONS
Signal
Input
DVI terminal
Pin
(DVI-D)
Pin
Input
1
T.M.D.S.
Data2-
14
+5V Power
2
T.M.D.S.
Data2+
15
Ground
3
T.M.D.S.
Data2/4 Shield
16
Hot Plug Detect
4
T.M.D.S.
Data4-
17
T.M.D.S.
Data0-
5
T.M.D.S.
Data4+
18
T.M.D.S.
Data0+
6
DDC Clock
19
T.M.D.S.
Data0/5 Shield
7
DDC Data
20
T.M.D.S.
Data5-
8
No Connect
21
T.M.D.S.
Data5+
9
T.M.D.S.
Data1-
22
T.M.D.S.
Clock Shield
10
T.M.D.S.
Data1+
23
T.M.D.S.
Clock+
11
T.M.D.S.
Data1/3 Shield
24
T.M.D.S.
Clock-
12
T.M.D.S.
Data3-
13
T.M.D.S.
Data3+
RGB
Input
signal
terminal
Frame
(D-sub
(for+5V)
\
1
2
3
4
5
6
7
8
/
9
10 11
12
13 14
15
16 r-m/
17
18 19 20
21 22
23
24
GND
I S-pin connector)
Pin
Input signal
1
R (PR/CR)
2
G or sync on green (Y)
3
B (PB/CB)
4
No connection
5
No connection
6
• When
G.GND (Y, GND)
8
B.GND (PB/CB,GND)
Sync signal type
GND
2
No connection
sync.on Green *
3
[SDA]
H. sync or H/V composite sync
14
V.sync. [V.CLK]
15
[SOL]
(
) : With component
•Even in the case of the recommended signals shown on the
following page, there may be instances when correct display is
not possible. In this case, use HN separate sync, HN composite
sync.
input
pin specifications
Input
signal
Y
2
Y-GND
3
C
4
C-GND
Frame
GND
pin specifications
connector
Pin
Signal
Pin
Signal
1
AUDIO
OUT (RIGHT)
12
Not Used
2
AUDIO
IN (RIGHT)
13
RGB-R GND
3
AUDIO
OUT (LEFT/MONO)
14
GND
4
AUDIO
GND
15
RGB-R/S.VHS
5
RGB-B GND
16
BLANKING
6
AUDIO
IN (LEFT/MONO)
17
COMPOSITE
7
RGB-B
IN
18
BLANKING
8
AUDIO/RGB
9
RGB-G
GND
10
Not Used
11
RGB-G
SWITCH
Priority
1
13
1
input to
H/V composite sync.
12
Pin
are simultaneously
No connection
11
connector
kinds of input signals
H/V separate sync.
lO
S-input
different
the monitor via a graphics board or the like, the monitor will
automatically
select the signals in the following priority order:
R.GND (PR/CR,GND)
7
9
Scart
signal
/ 16:9
CHROMINANCE
IN
SIGNAL
VIDEO
GND
SIGNAL
GND
OUT
19
COMPOSITE
VIDEO
20
COMPOSITE
VIDEO / S.VHS LUMINANCE
21
GND / SHIELD
(CHASSIS)
IN
78
IN
PRODUCT SPECiFiCATiONS
Recommended
With
Digital
Signal
RGB signal
List
input
(RGB1
input)
Signal mode
NO,
Signal
Name
Resolution
Vertical
frequency
(az)
Horizontal
Dot clock
frequency
frequency
(kHz)
(MHz)
640 X 400
70.08
31.47
25.18
640 X 480
59.94
31.47
25.18
864 X 480
59,94
31.47
34.24
4
640 X 480
72.81
37.86
31.50
5
640 X 480
640 X 480
75.00
85,01
37.50
43.27
31.50
36.00
80O X 600
56,25
35.16
36.00
800 X 600
800 X 600
60,32
72.19
37.88
48.08
40.00
50.00
800 X 600
75.00
46.88
49.50
800 X 600
1024 X 768
85.06
60.00
53.67
48.36
56.25
65.00
1024 X 768
70.07
56.48
75.00
1024 X 768
720 X 480
75.03
59.94
60.02
31.47
78.75
27.00
1280X720
60,00
45.00
74.25
60.00
33.75
74.25
1
VGA
2
3
W-VGA
6
7
8
VESA
9
I0
II
12
13
14
15
480p
16
17
720p/60
1080i/60
1920 x 1080
Setup Menu Condition
DVI-PC
DVI-STB
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
• Make sure that the signal of the equipment to be connected is compatible with the pecifications of this list.
With
Analog
RGB signal
input
(RGB2
Signal
Name
1
2
VGA
3
W-VGA
Resolution
Vertical
Horizontal
frequency
(kHz)
frequency
(Hz)
(MHz)
70.08
31.47
25.18
640 X 480
59.94
31.47
25.18
864 X 480
59.94
31,47
34,24
4
640 x 480
72,81
37.86
31.50
S
640 x 480
75.00
37.50
31.50
T
--T-
640 X 480
85.01
43.27
36.00
800 X 800
800 X 600
56.25
60.32
35.16
37.88
36.00
40.00
___9
800 X 600
72,19
48.08
50.00
8O0 X 800
800 X 600
75.00
85.06
46.88
53.67
49.50
56.25
1024X768
60,00
48,36
65.00
1024 X 768
1024 X 768
70,07
75,03
56,48
60,02
75.00
78,75
1_2_s
1024 X 768
85.00
68,68
94,50
16
1152X864
1280 X 1024
75,00
60.02
67,50
63.98
108,00
108.00
1280 X 1024
1280 X 1024
75,03
85.02
79.98
91.15
135.00
157.50
2O
1600 X 1200
60.00
75.00
162.00
75.00
85.00
93.75
106.25
202.50
22
1600 X 1200
1600 X 1200
23
640 X 480
66,67
35.00
832 X 624
74.55
74,93
49.72
60.24
75,06
68.68
"7T-TZ
13
14
VESA
qT-
1__ 9
24
-_26
Macintosh
1024 X768
1152X870
EIA-861
EIA-861
(O : acceptabEe)
Dot clock frequency
640 X 400
10
EIA-861
input)
Signal mode
NO,
Remarks
79
229.50
30.24
57.28
80.00
100.00
Remarks
WVGA type : On
PRODUCT SPECiFiCATiONS
27
1280 X 768
59.833
47.986
81.00
28
1280 X 768
69.997
56.137
94.760
1280 X 768
59.876
47.776
79.50
WXGA Mode:(1280x768)
1366 X 768
60.015
47.712
89.50
WXGA Mode:(1366x768)
W-XGA
29
30
• The type of video board or connecting
Clock and Clock Phase.
• The monitor
• The monitor
polarities.
• Displaying
With
cable used may not allow for correct
displays
Composite
Signal
Input(AV1
Name
-AV4
Resolution
input)
and S-video
Vertical
frequency
Input
R, G, B Video
input
(Hz)
and AV4
Signal Name
Resolution
frequency (kHz)
Dot clock
frequency (MHz)
Remarks
15.73
-
input),
component
525
input
(AV1,
Signal
No,
Signal Name
frequency
(Hz)
(NTSC=M)
Resolution
59.94
AV2
and
RGB2-component
mode
input),
Horizontal
Vertical frequency
(Hz)
frequency (kHz)
1
576i
576
50.00
2
480i
48o
59.94
15.73
576p
576
50.00
31.26
3
input),
15.73
Horizontal
Vertical
and AV4
of stripes.
Remarks
Signal mode
With
Horizontal
Dot clock
frequency (MHz)
frequency (kHz)
59.94
(AV2
(AV3
Horizontal
525
NTSC=M
No,
1
Position, Vertical Position,
Note that different signals having all these elements alike may be handled as the same signal.
images with more than 480 lines of vertical resolution at Full diplay (compressed
display) can result in the interpolation
Signal mode
With
of Horizontal
may fail to display an animation image correctly when a signal having a vertical frequency
of 85Hz or higher is input to it.
differentiates
the signal modes according
to the horizontal and vertical frequencies
and the horizontal and vertical sync signal
No,
1
adjustment
Dot clock
frequency (MHz)
Remarks
15.63
4
480p
48o
59.94
31.47
5
1080i/50
1080
50.00
28.13
6
1080i/60
1080
60.00
33.75
7
720p/60
72O
59.94
44.96
• The monitor differentiates
the signal modes according
to the horizontal and vertical frequencies
and the horizontal and vertical sync signal
polarities.
Note that different signals having all these elements alike may be handled as the same signal.
• Displaying
images with more than 480 lines of vertical resolution at Full diplay (compressed
display) can result in the interpolation
of stripes.
8O
INDEX
A
Locks
Accessories,
. ................................
Antennas (Connecting) ........................
Antenna Setup ...............................
Audio
TruBass ..................................
Audio Settings
..............................
Auto Adjust (RGB Input) .......................
4
10
44
40
40
63
B
Change Access Code ........................
Channel Lock ...............................
Front Panel Lock ............................
48
48
48
Input Lock .................................
Movie Ratings ..............................
TV Ratings .................................
TV Ratings (Canadian - English) ................
TV Ratings (Canadian - French) ................
48
49
50
51
52
M
Balance ....................................
Bass .......................................
Black Enhancement ...........................
40
40
36
Matrix Surround ..............................
Monitor Out .................................
Brightness
36
P
..................................
C
Caution and Safety Tips .......................
Channel
Auto Channel Tuning .........................
Clock
Phase (RGB Input) ..........................
Closed Captions
Captions ..................................
Color Management ...........................
Color Decoding ..............................
Color Temperature ............................
Color ......................................
Contrast ....................................
Contrast Mode ...............................
2-3
44
64
53
39
39
38
36
36
36
40
35
27-30
63
63
R
Remote Control
Functions ...............................
DVD Programming
..........................
Installing Batteries ............................
R/G/B ................................
22-31
31
4
21, 55-67
S
E
External Video Source
......................
15-21
F
Freeze .....................................
Screen Saver ................................
Sharpness ..................................
Speakers ..................................
Split Mode ..................................
42
36
6-7
27
30
T
I
Input button
Perfect Volume ..............................
Picture Mode ................................
Picture-in-Picture (PIP) ......................
Position (RGB Input)
Horizontal .................................
Vertical ....................................
40
19
.................................
23
L
Language
Menu Language .............................
Timers .....................................
Tint ........................................
Treble ......................................
54
81
41
36
40
NOTES
82
NOTES
83
HITACHI
QR63371
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement