Model HHPAV-222 55 to 65 GHz Power Amplifier

Model HHPAV-222 55 to 65 GHz Power Amplifier
Model HHPAV-222
55 to 65 GHz Power Amplifier
APPLICATIONS
•
Point-to-Point Radios
•
Radar Transmitters
•
WiGig Development &
Test Equipment
The HHPAV-222 Power Amplifier covers the frequency range from 55 to 65 GHz. MMIC
technology is employed for high reliability and repeatability. The amplifier package provides
WR-15 waveguide interfaces in an in-line configuration using the standard UG-385/U flange.
The amplifier can be used in transmitters for communication and radar systems and also for
amplification in test equipment. The power amplifier contains a voltage regulator and bias
sequencing circuitry allowing the use of a single bias to power the amplifier.
TECHNICAL SPECIFICATIONS
Parameter
Frequency Range
Noise Figure
Small Signal Gain
P1dB
Input Return Loss
Output Return Loss
Maximum Input Power
DC Bias
RF Interfaces
Size
Surface Finish
Specification
55.0 to 65.0 GHz
5.5 dB typical
25 dB minimum
+12 dBm minimum, +14 dBm typical
7 dB typical
13 dB typical
-5 dBm without damage
+6 VDC @ 300 mA typical
WR-15 waveguide, UG-385/U flanges
1.31”L X 1.34”W x 0.97”H
Gold Plate
12 Lancaster County Road, Harvard, Massachusetts 01451 Tel: (978) 772-7774 FAX: (978) 772-7775
Visit us on the web at www.hxi.com
Rev A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement