Portable Air Quality Monitor
Portable Air Quality Monitor
The Series 500 monitor from Aeroqual is a feature-rich
portable monitor with the ability to accurately measure multiple
target gases at different concentrations in indoor and outdoor
Built-in data-logging and a long-life, fast-charging lithium
battery makes the Series 500 the ultimate choice for air quality
professionals, consultants, and researchers.
Built-in data-logging
Lithium battery as standard
PC software (Windows 7, 8, XP)
Connect to PC via USB cable
High and low alarms, control output
Link data to a specific location and monitor
Interchangeable gas sensor heads (30+ choices)
Temperature and RH sensor optional (plug-and-play)
Gas: ppm or mg/m3 | Humidity: % | Temperature °C or F
Instant, minimum, maximum, average
Low alarm, high alarm, mute (configurable)
Alarm, battery, data logging, sensor, standby, monitor and location ID
Low and/or high alarm set points (with mute)
Low alarm, high Alarm, control (150mA max)
Zero calibration, gain adjustment
RS232 to USB
Up to 8,188 records (2,706 incl. temp/RH)
Software and data cable supplied
Real time
12V DC (power adaptor/charger supplied 100-250V AC)
Lithium polymer 12V DC | 2700mA/h (2 hr charge time / 8 hr run time)
PC and ABS; IP20 and NEMA 1 equivalent
195 x 122 x 54 (mm); 7⅝ x 4¾ x 2⅛ (in)
< 460 g; < 16 oz
Temperature: -5 oC to 45 oC ; Humidity: 0 to 95% non-condensating
Remote sensor kit, spare battery, car adaptor, wall bracket, carry case
Range -40°C to 124°C (-40°F to 255°F); Range 0 to 100% RH
Part 15 of FCC Rules; EN 50082-1: 1997; EN 50081-1: 1992
Measurement units
Reading functions
Alarm features
Display status indicators
Audible alarm
External signal functions
Sensor calibration features
Analog output
Digital interface
Data logging capacity
PC data logging
Clock function
Power supply
Rechargeable battery
Enclosure material and rating
Size (with sensor head)
Weight (with sensor head and battery)
Environmental operating conditions
Optional accessories
Temperature & Humidity sensor
Carry Case
Remote Sensor Kit
Calibration Accessory
Sensor heads are available for these gases:
Ammonia (NH3)
Carbon dioxide (CO2)
Carbon monoxide (CO)
Hydrogen (H2)
Hydrogen sulphide (H2S)
Methane (CH4)
Nitrogen dioxide (NO2)
Non methane hydrocarbon (NMHC)
Ozone (O3)
Sulphur dioxide (SO2)
Volatile organic compounds (VOC)
Multi-sensor head: VOC / CO / CO2 or CO / CO2
Wall Mount
WWW.DUSTSENTRY.NL | +31 70 413 07 50
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF