TEH-740 MOC-040 TEH-950 Art. No. MOP-055

WWW.GLOBALENCODER.COM
THETHER KITS
TEH-950
95
TEH-740
88
61
73
69
51
ø 4,2
151,5
175
ø 3,1
6
22
3
12,1
0,5
70
3,5
63
81,5
30
4
58,5
6
75
22
30
MOUNTING CLIP & PIN
40
MOC-040
30
34
43
22
20
ø4
ø3
5
10
10
Art. No.
L (mm)
MOP-055
55
MOP-050
50
MOP-045
45
L
8
10
0,6 x 45°
83
MECHANICAL
INSTALLATION
RECOMMENDED MECHANICAL INSTALLATION
1. Shaft Encoders
Flexible
Coupling
a. mount encoder to mounting bracket.
b. install coupling to shaft encoder.
c. align encoder and coupling to drive shaft.
d. mount bracket to machine assembly.
e. check alignment is correct.
f. tighten all screws.
Mounting
Bracket
2. Hollow Shaft Encoders
Mounting Pin
(allow axial
movement)
a. mount pin to machine assembly.
b. install encoder to shaft of the machine.
c. use mounting pin to stop encoder from rotating.
d. check if mounting pin allows axial
movement of the optical encoder.
e. check alignment is correct.
f. tighten all set screws.
Set Screw
CAUTION
All encoders produced by the GESgroup are designed to be
reliable, rugged and easy to install. Should you require clarification
on any of these instructions, please contact the nearest GESgroup
company (See back cover page).
Caution! Any of these actions my cause damage to the product.
84
Do not shock the encoder
Do not subject the encoder
to axial or radial stress
Do not dismantle the encoder
Do not use a rigid coupling
Do not tool the
encoder or its shaft
Do not use makeshift techniques to mount the encoder

Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project