Product information
Product information
08. 2012
Amp Box DS
Stereo power amplifier
technical data
Output power
2 x 100W / 180W @ 8 / 4 ohms
2 ohms drive capability
NEW! Improved PWM-circuitry (Pulse Wave Modulation)
Frequency response
10Hz - 50kHz (+ 0dB, - 3dB)
NEW! Improved signal spectrum and lower distortion
Signal to noise ratio
>-90dB (IEC -A)
NEW! 2 ohms drive capability
< 0,1% bei 90W
Line level input
1 pair RCA/Cinch sockets
High efficiency from mains to audio power (92%)
Input sensitivity
Low heat emission
Input impedance
Speaker out
4mm Ø bananas, spades or bare wire
Trigger12V DC
In&Out, 2-pole jack Ø 2,5mm
Stereo level input (RCA)
Gold-plated 5-way speaker binding posts
External power supply
48V/2,5A DC;100 - 240V, 50/60Hz
Suitable for banana/spade/pin/bare wire
Dimensions W x H x D
103 x 72 x 144 (163mm including sockets)
1400g without power supply
Trigger input & loop out
Metal casing protects against vibration and interference
Available in black or silver
Retail price
399,00 €
Ultra compact power amplifier - efficient & audiophile!
A ultra high-efficiency Bi-Phase PWM(Pulse Wave Modulation) circuit with SMD parts gives outstanding audio performance and stays cool on the
outside. Sound quality is aimed to be as close as possible to Class A tube amplifiers with their liquid and lifelike presentation. The Amp Box Mono S is
micro-sized and therefore allows easy placement and can be switched on & off remotely via a trigger signal. A 45cm power-on cable is supplied for
this purpose. For Bi- or Tri-amplification use, the remote power-on signal can be relayed to further units.
Rear view
Front black
RCA Stereo
a division of AUDIO TUNING GmbH
1050 Wien, Margaretenstraße 98,
Update: JK / DZ
Datum 24.08.2012
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF