L26RFX/P H1209

L26RFX/P H1209
L26RFX/P
H1209
Extremely stiff aluminium cone gives tremendous bass precision.
The cone and the low loss rubber surround show no sign of the familiar cone
edge resonance and distortion associated with soft cones.
2” diameter high temperature voice coil with black anodized aluminum coil former
gives high power handling and reduced power compression.
Large magnet system gives good sensitivity and transient response.
Phase plug reduces compression due to temperature variations in the voice coil,
eliminates resonances that would occur in the volume between the dust cap and the
pole piece and increases the power handling capacity.
Extremely stiff and stable injection moulded metal basket keeps the critical components in perfect alignment. Large windows in the basket both above and below the
spider reduce sound reflection, air flow noise and cavity resonance to a minimum.
100
50
95
90
40
85
SPL [dB]
75
20
70
65
Impedance [ohm]
30
80
10
60
55
50
10
0
100
1 000
10 000
Frequency [Hz]
The frequency responses above show measured free field sound pressure in 0, 30, and 60 degrees angle using a 28L closed box. Input
2.83 VRMS, microphone distance 0.5m, normalized to SPL 1m.The dotted line is a calculated response in infinite baffle
based on the parameters given for this specific driver. The impedance is measured in free air without baffle using a 2V
sine signal.
Nominal Impedance
8 Ohms
Voice Coil Resistance
6.3 Ohms
Recommended Frequency Range
20 - 1000 Hz
Voice Coil Inductance
1.83 mH
Short Term Power Handling *
300 W
Force Factor
10.7 N/A
Long Term Power Handling *
125 W
Free Air Resonance
20 Hz
Characteristic Sensitivity (2,83V, 1m)
88 dB
Moving Mass
53.0 g
Voice Coil Diameter
51 mm
Air Load Mass In IEC Baffle
3.48 g
Voice Coil Height
20 mm
Suspension Compliance
1.2 mm/N
Air Gap Height
6 mm
Suspension Mechanical Resistance
3.3 Ns/m
Linear Coil Travel (p-p)
14 mm
Effective Piston Area
330 cm2
Maximum Coil Travel (p-p)
35 mm
VAS
171 Litres
Magnetic Gap Flux Density
1.23 T
QMS
2.15
Magnet Weight
1.30 kg
QES
0.39
Total Weight
4.05 kg
QTS
0.33
Jul 2007-1
RoHS compliant product
*IEC 268-5
SEAS reserves the right to change technical data
W26-502
www.seas.no
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement