Origo™ / Aristo® Mig 5000i Aristo® Mig U4000i/U5000i

Origo™ / Aristo® Mig 5000i Aristo® Mig U4000i/U5000i
Origo™ / Aristo® Mig 5000i
Aristo® Mig U4000i/U5000i
Optimum welding solutions
Robust and powerful
Origo™/ Aristo® Mig 5000i as well as Aristo® Mig U4000i and
U5000i are ideal partners when it comes to efficient production
or prefabrication of high alloyed materials with a very high
demand on the welding performance.
The power sources are compact and sturdy pieces of
equipment with a chassis made of extruded aluminium
sections: Alutech™. This is a robust material that withstands
rough treatment.
The power sources are based on inverter IGBT technology that
provides reliable equipment with outstanding welding
characteristics. The control and communication CAN-bus
system means less cables, which in turn increases operational
reliability.
ESAB LogicPump The patented ESAB LogicPump ELP,
automatically starts the cooling water pump in the machine
when a water cooled torch is connected to the wire feeders
Aristo® YardFeed 2000, RoboFeed 3004, Feed 3004 or Aristo®
Feed 4804. This eliminates the risk of over-heating the welding
torch. When a self-cooled torch is used, the pump is
automatically shut off giving lower noise and longer lifetime for
the cooling pump.
Aristo® Selector is an efficient solution for applications which
require a quick and easy exchange between 2 different wire
dimensions or wire types. Connect 2 x Aristo® Feed to 1 Aristo®
Mig and the selector provides automatically power to the one in
operation.
Flexibility
The power sources are optimised to operate together with the
wire feeders Aristo® YardFeed 2000, RoboFeed 3004, Feed
3004 and Aristo® Feed 4804. Connection cables up to 35 m
provides a working radius of up to 35 m to suit all your
individual welding needs.
The TrueArcVoltage System™, in combination with an ESAB
PSF™ torch, guarantees that you weld with the correct arc
voltage independent of any voltage drop in the welding cables.
This means that you will get the same arc voltage and weld
result either you have a set-up with short connection cable and
3 m torch or a set-up with 35 m working radius.
Applications
• Advanced mild and stainless steel fabrication
• Advanced aluminium fabrication
• Prefabrication for Offshore and Shipbuilding
• Production of linen drapery (white goods)
• Prefabrication of Ni based material
• Nuclear & Aerospace
• Erection and repair of process and power plants
• QA Applications
• Pressure vessels, tanks and
apparatuses for the process industry
Aristo® U82 for advanced applications
Aristo® U82 support a quick access to synergic setting. More than
200 pre-programmed synergic lines are available. Welding
based on pre-programmed synergic data reduce the preparation
before start to a minimum.
The memory provides additional functionalities. The capacity to
store up to 255 welding parameters which can be recalled when
ever needed. A number of soft buttons with flexible functions
provides direct access to Hot start, crater fill, 2/4-stroke etc.
• Multiprocess equipment; MIG/MAG, pulse MIG, MMA,
Carbon Arc Gouging (5000i), TIG and Pulse TIG
(U4000i/U5000i).
• Reliable and smooth starts and ends supported by efficient
Hot-start and crater fill functions
• Efficient Man Machine Communication by the user-friendly
control panels Origo™ MA23 and MA24 or Aristo® U6 and
U82
• Wide range of pre-programmed synergic lines. Aristo® U82
provides the facility to define and store customized synergic
lines for any material or gas combinations
• Memory for 3 (MA23/24), 10 (U6) or 255 (Aristo® U82) welding
parameters
• ESAB LogicPump ELP, secures automatic start of water
pump by connection of a water cooled welding torch at the wire
feeder or a water cooled TIG torch.
• TrueArcVoltage System™, measures the correct arc voltage
value independent of the length of the connection cable, return
cable or welding torch.
• Dust filter to handle tough and dirty environment and avoid
grinding-dust and metal particles inside the chassis
XA00113020
• SuperPulse™, the welding process with the ability to control
the heat input (Aristo® U82 Plus ).
Technical data
Mig U4000i
Mig 5000i
Mig U5000i
Mains Voltage, V, Hz
3x400, 50/60
3x400, 50/60
3x400, 50/60
Fuse anti-surge, A
20
32
32
2
4x4
4x6
4x6
Mains cable, mm
Setting range, MIG/MAG, A/V
16-400/8-60
16-500/8-60
16-500/8-60
Setting range, MMA DC, A
16-400
16-500
16-500
Setting range, TIG DC, A
4-400
4-500
Permitted load, 40o C
at 35% duty cycle MMA, A/V
400/36
at 60% duty cycle MMA, A/V
320/33
500/40
500/40
at 100% duty cycle MMA, A/V
250/30
400/36
400/36
Open circuit voltage, U0 max V
1)
MIG/MAG 55-70
MIG/MAG 72-88
MIG/MAG, TIG 72-88
Without VRD function
MMA/TIG 78-90
MMA 68-80
MMA 68-80
Without VRD function 1)
MIG/MAG, MMA 58
MIG/MAG, MMA 59
MIG/MAG, MMA 59
VRD function deactivated 2)
< 35
< 35
< 35
VRD function activated 2)
Energy save mode (400V), W
60
50
50
Apparant power, kVA
18.6
25.2
25.2
Power factor at maximum current
0.9
0.91
0.91
Efficiency at maximum current, %
86
87
87
Control voltage, V, Hz
42, 50/60
42, 50/60
42, 50/60
Dimensions l x w x h, mm
625x394x496
625x394x496
625x394x496
Dimensions l x w x h (with cooling unit), mm
625x394x776
625x394x776
625x394x776
Enclosure class
IP 23
IP 23
IP23
Insulation class (main trafo.)
H
H
H
Operating temperature, °C
-10 to +40
-10 to +40
-10 to +40
Weight, kg
63.5
68
71
Application class
S
S
S
Standards
IEC/EN 60974-1,-2,-3,-10
Water cooling unit:
Cooling capacity, W, l/min
2500 at 40 °C , 1.5
Coolant volume, l
5.5
Max flow:, l/min
2.0
Max pressure, bar
3.4
Weight, kg
20
Multi Voltage unit:
Add on or separate
Main voltage, V, Hz
3x208/230/400/460/475/575, 50/60
Weight, kg
80
Dimension l x w x h, mm
621x389x266
1) Valid for power sources without VRD specifications on the rating plate.
2) Valid for power sources with VRD specifications on the rating plate. The VRD function is explained in the instructions
manual for the control panel if the panel has that function.
Ordering information
Unrivalled service and
support
Our commitment and ability to deliver the
expected service and support starts
immediately after the order is confirmed.
We endeavour to offer our customers an
After Sales service, which is second to
none. A strong and skilful service
organisation is prepared to offer service
and maintenance, calibration, validation
and upgrading of equipment and
software.
The service organisation will offer
standardised solutions for the
reconditioning or modification of existing
products.
Spare and wear parts are manufactured
according to ESAB’s quality plan.
Exchange Printed Circuit Board (PCB),
exchange modules and components are
available for all our products in order to
reduce downtime to an absolute
minimum. ESAB is continuously
upgrading authorised service partners for
local service support. Customers who
have their own service and maintenance
personnel will always be offered a
service-training package as part of a total
ESAB offering. However, product and
process training for end-users will form an
additional part of the ESAB offering.
Always ask your ESAB sales
representative or distributor for a
complete ESAB solution.
Interconnection cables 12/10 pole
Mig U4000iw
Origo™ / Aristo® Mig 5000i
Origo™ / Aristo® Mig 5000iw
Aristo® Mig U5000iw
Accessories:
Multi Voltage unit, Wide body
(3x208/230/400/460/475/575V, 50/60 Hz)
Handle incl mounting screws for separate installation.
(Complete set = 2)
Trolley 1 (Standard)
Trolley 2 (Feeder with counter balance device and/or 2 gas bottles)
Guide pin (If no trolley)
Remote control MTA1 CAN
Remote control AT1 CAN
Remote control AT1 CourseFine CAN
Remote interconnection cables:
5 m, 12 pole
10 m, 12 pole
25 m, 12 pole
5 m HD, 12 pole
10 m HD, 12 pole
Foot pedal T1 Foot CAN, incl. 5 m cable with 10 pole plug
(For connection to the feeder with U6 panel)
Foot pedal T1 Foot CAN, incl. 5 m cable with 12 pole plug
(For connection to the feeder for U82)
Quick connector kit for current, water and shielding gas
supply for 2x Aristo® Feed
MMC kit for MMC panel mounted in the power source
Options:
Water Flow guard complete
0458 625 885
0459 230 880
0459 230 881
0459 230 883
0459 145 880
0459 307 881
0458 530 880
0458 603 880
0458 731 880
0459 491 880
0459 491 883
0459 491 884
0459 554 880
0459 554 881
0459 554 883
0459 554 980
0459 554 981
0460 315 881
0460 315 880
0459 546 880
0459 579 880
0456 855 880
ESAB AB
Box 8004
SE-402 77 GÖTEBORG SWEDEN
Phone: +46 31 50 90 00 Fax +46 31 22 04 49
E-mail: info@esab.se
www.esab.com
Water cooled
95 mm2
1.7 m
5.0 m
10.0 m
15.0 m
25.0 m
35.0 m
0459 528 970
0459 528 971
0459 528 972
0459 528 973
0459 528 974
0459 528 975
Delivery content: 5 m mains cable incl. plug and 5 m return cable
incl. earth clamp
2012-07-26 / ESAB reserves the right to alter specifications without prior notice
Aristo®
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising